Previously, UNBOUNDED meant no lower bound when used in the FROM list,
and no upper bound when used in the TO list, which was OK for
single-column range partitioning, but problematic with multiple
columns. For example, an upper bound of (10.0, UNBOUNDED) would not be
collocated with a lower bound of (10.0, UNBOUNDED), thus making it
difficult or impossible to define contiguous multi-column range
partitions in some cases.
Fix this by using MINVALUE and MAXVALUE instead of UNBOUNDED to
represent a partition column that is unbounded below or above
respectively. This syntax removes any ambiguity, and ensures that if
one partition's lower bound equals another partition's upper bound,
then the partitions are contiguous.
Also drop the constraint prohibiting finite values after an unbounded
column, and just document the fact that any values after MINVALUE or
MAXVALUE are ignored. Previously it was necessary to repeat UNBOUNDED
multiple times, which was needlessly verbose.
Note: Forces a post-PG 10 beta2 initdb.
Report by Amul Sul, original patch by Amit Langote with some
additional hacking by me.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
Claiming that NATURAL JOIN is equivalent to CROSS JOIN when there are
no common column names is only strictly correct if it's an inner join;
you can't say e.g. CROSS LEFT JOIN. Better to explain it as meaning
JOIN ON TRUE, instead. Per a suggestion from David Johnston.
Discussion: https://postgr.es/m/CAKFQuwb+mYszQhDS9f_dqRrk1=Pe-S6D=XMkAXcDf4ykKPmgKQ@mail.gmail.com
Also fix two other issues, while we're at it:
* In error message on connection failure, if multiple network addresses
were given as the host option, as in "host=127.0.0.1,127.0.0.2", the
error message printed the address twice.
* If there were many more ports than hostnames, the error message would
always claim that there was one port too many, even if there was more than
one. For example, if you gave 2 hostnames and 5 ports, the error message
claimed that you gave 2 hostnames and 3 ports.
Discussion: https://www.postgresql.org/message-id/10badbc6-4d5a-a769-623a-f7ada43e14dd@iki.fi
Commit e9c81b601 changed this, but missed updating the documentation.
The adjacent claim that we use TAP tests only in src/bin seems pretty
obsolete as well. Minor other copy-editing.
Original wording had confusingly vague antecedent for "they", so replace
that with a more repetitive but clearer formulation. In passing, make the
link to the installation requirements section more specific. Per gripe
from Martin Mai, though this is not the fix he initially proposed.
Discussion: https://postgr.es/m/CAN_NWRu-cWuNaiXUjV3m4H-riWURuPW=j21bSaLADs6rjjzXgQ@mail.gmail.com
If an operation being waited for does not complete within the timeout,
then exit with a nonzero exit status. This was previously handled
inconsistently.
Update the documentation for \pset to mention
columns|linestyle|pager_min_lines. Add various mentions of \pset
command equivalences that were previously inconsistent.
Author: Дилян Палаузов <dpa-postgres@aegee.org>
Update the documentation a bit to include that logical replication as
well as other and third-party replication clients can participate in
synchronous replication.
Buildfarm evidence shows that TCP_KEEPALIVE_THRESHOLD doesn't exist
after all on Solaris < 11. This means we need to take positive action to
prevent the TCP_KEEPALIVE code path from being taken on that platform.
I've chosen to limit it with "&& defined(__darwin__)", since it's unclear
that anyone else would follow Apple's precedent of spelling the symbol
that way.
Also, follow a suggestion from Michael Paquier of eliminating code
duplication by defining a couple of intermediate symbols for the
socket option.
In passing, make some effort to reduce the number of translatable messages
by replacing "setsockopt(foo) failed" with "setsockopt(%s) failed", etc,
throughout the affected files. And update relevant documentation so
that it doesn't claim to provide an exhaustive list of the possible
socket option names.
Like the previous commit (f0256c774), back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
pg_import_system_collations() refused to create any ICU collations if
the current database's encoding didn't support ICU. This is wrongheaded:
initdb must initialize pg_collation in an encoding-independent way
since it might be used in other databases with different encodings.
The reason for the restriction seems to be that get_icu_locale_comment()
used icu_from_uchar() to convert the UChar-format display name, and that
unsurprisingly doesn't know what to do in unsupported encodings.
But by the same token that the initial catalog contents must be
encoding-independent, we can't allow non-ASCII characters in the comment
strings. So we don't really need icu_from_uchar() here: just check for
Unicode codes outside the ASCII range, and if there are none, the format
conversion is trivial. If there are some, we can simply not install the
comment. (In my testing, this affects only Norwegian Bokmål, which has
given us trouble before.)
For paranoia's sake, also check for non-ASCII characters in ICU locale
names, and skip such locales, as we do for libc locales. I don't
currently have a reason to believe that this will ever reject anything,
but then again the libc maintainers should have known better too.
With just the import changes, ICU collations can be found in pg_collation
in databases with unsupported encodings. This resulted in more or less
clean failures at runtime, but that's not how things act for unsupported
encodings with libc collations. Make it work the same as our traditional
behavior for libc collations by having collation lookup take into account
whether is_encoding_supported_by_icu().
Adjust documentation to match. Also, expand Table 23.1 to show which
encodings are supported by ICU.
catversion bump because of likely change in pg_collation/pg_description
initial contents in ICU-enabled builds.
Discussion: https://postgr.es/m/20c74bc3-d6ca-243d-1bbc-12f17fa4fe9a@gmail.com
The comparison with the target rows on the subscriber side was done with
datumIsEqual(), which can have false negatives. For instance, it didn't
work reliably for text columns. So use the equality operator provided
by the type cache instead.
Also add more user documentation about replica identity requirements.
Reported-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Marco Atzeri reported that initdb would fail if "locale -a" reported
the same locale name more than once. All previous versions of Postgres
implicitly de-duplicated the results of "locale -a", but the rewrite
to move the collation import logic into C had lost that property.
It had also lost the property that locale names matching built-in
collation names were silently ignored.
The simplest way to fix this is to make initdb run the function in
if-not-exists mode, which means that there's no real use-case for
non if-not-exists mode; we might as well just drop the boolean argument
and simplify the function's definition to be "add any collations not
already known". This change also gets rid of some odd corner cases
caused by the fact that aliases were added in if-not-exists mode even
if the function argument said otherwise.
While at it, adjust the behavior so that pg_import_system_collations()
doesn't spew "collation foo already exists, skipping" messages during a
re-run; that's completely unhelpful, especially since there are often
hundreds of them. And make it return a count of the number of collations
it did add, which seems like it might be helpful.
Also, re-integrate the previous coding's property that it would make a
deterministic selection of which alias to use if there were conflicting
possibilities. This would only come into play if "locale -a" reports
multiple equivalent locale names, say "de_DE.utf8" and "de_DE.UTF-8",
but that hardly seems out of the question.
In passing, fix incorrect behavior in pg_import_system_collations()'s
ICU code path: it neglected CommandCounterIncrement, which would result
in failures if ICU returns duplicate names, and it would try to create
comments even if a new collation hadn't been created.
Also, reorder operations in initdb so that the 'ucs_basic' collation
is created before calling pg_import_system_collations() not after.
This prevents a failure if "locale -a" were to report a locale named
that. There's no reason to think that that ever happens in the wild,
but the old coding would have survived it, so let's be equally robust.
Discussion: https://postgr.es/m/20c74bc3-d6ca-243d-1bbc-12f17fa4fe9a@gmail.com
Startup process is displayed in pg_stat_activity, noted by Yugo Nagata.
Transactions can be resolved at end of recovery.
Author: Yugo Nagata, with addition by me
When materialized views were added, psql's \d commands were made to
treat them as a separate object category ... but not everyplace in the
documentation or comments got the memo.
Noted by David Johnston. Back-patch to 9.3 where matviews came in.
Discussion: https://postgr.es/m/CAKFQuwb27M3VXRhHErjCpkWwN9eKThbqWb1=trtoXi9_ejqPXQ@mail.gmail.com
It was unsafe to instruct users to start/stop the server after
pg_upgrade was run but before the standby servers were rsync'ed. The
new instructions avoid this.
RELEASE NOTES: This fix should be mentioned in the minor release notes.
Reported-by: Dmitriy Sarafannikov and Sergey Burladyan
Discussion: https://postgr.es/m/87wp8o506b.fsf@seb.koffice.internal
Backpatch-through: 9.5, where standby server upgrade instructions first appeared
Previously we required every exported transaction to have an xid
assigned. That was used to check that the exporting transaction is
still running, which in turn is needed to guarantee that that
necessary rows haven't been removed in between exporting and importing
the snapshot.
The exported xid caused unnecessary problems with logical decoding,
because slot creation has to wait for all concurrent xid to finish,
which in turn serializes concurrent slot creation. It also
prohibited snapshots to be exported on hot-standby replicas.
Instead export the virtual transactionid, which avoids the unnecessary
serialization and the inability to export snapshots on standbys. This
changes the file name of the exported snapshot, but since we never
documented what that one means, that seems ok.
Author: Petr Jelinek, slightly editorialized by me
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/f598b4b8-8cd7-0d54-0939-adda763d8c34@2ndquadrant.com
When we reimplemented SRFs in commit 69f4b9c85, our initial choice was
to allow the behavior to vary from historical practice in cases where a
SRF call appeared within a conditional-execution construct (currently,
only CASE or COALESCE). But that was controversial to begin with, and
subsequent discussion has resulted in a consensus that it's better to
throw an error instead of executing the query differently from before,
so long as we can provide a reasonably clear error message and a way to
rewrite the query.
Hence, add a parser mechanism to allow detection of such cases during
parse analysis. The mechanism just requires storing, in the ParseState,
a pointer to the set-returning FuncExpr or OpExpr most recently emitted
by parse analysis. Then the parsing functions for CASE and COALESCE can
detect the presence of a SRF in their arguments by noting whether this
pointer changes while analyzing their arguments. Furthermore, if it does,
it provides a suitable error cursor location for the complaint. (This
means that if there's more than one SRF in the arguments, the error will
point at the last one to be analyzed not the first. While connoisseurs of
parsing behavior might find that odd, it's unlikely the average user would
ever notice.)
While at it, we can also provide more specific error messages than before
about some pre-existing restrictions, such as no-SRFs-within-aggregates.
Also, reject at parse time cases where a NULLIF or IS DISTINCT FROM
construct would need to return a set. We've never supported that, but the
restriction is depended on in more subtle ways now, so it seems wise to
detect it at the start.
Also, provide some documentation about how to rewrite a SRF-within-CASE
query using a custom wrapper SRF.
It turns out that the information_schema.user_mapping_options view
contained an instance of exactly the behavior we're now forbidding; but
rewriting it makes it more clear and safer too.
initdb forced because of user_mapping_options change.
Patch by me, with error message suggestions from Alvaro Herrera and
Andres Freund, pursuant to a complaint from Regina Obe.
Discussion: https://postgr.es/m/000001d2d5de$d8d66170$8a832450$@pcorp.us
The exact numbers don't matter, since they are examples, but it was
looking quite dated.
For the target version, we now automatically substitute the current
major version. The updated example source version should be good for a
couple of years.
Dean Rasheed
Tom Lane
Alvaro Herrera
Heikki Linnakangas
Peter Eisentraut
Magnus Hagander
Andrew Gierth
Simon Riggs
Tatsuo Ishii
Bruce Momjian
Andres Freund