century specifications just like positive/AD centuries. Previously the
behavior was either wrong or inconsistent with positive/AD handling.
Centuries without years now always assume the first year of the century,
which is now documented.
rather than only sort-of working as the previous attempt had left it.
Clean up some unnecessary differences between the way these were coded and
the way the YYYY case was coded. Update the regression test cases that
proved that it wasn't working.
noise words for the last twelve years, for compatibility with Berkeley-era
output formatting of the special INVALID values for those datatypes.
Considering that the datatypes themselves have been deprecated for awhile,
this is taking backwards compatibility a little far. Per gripe from Josh
Berkus.
in "postgres_verbose" intervalstyle, and the equally arbitrary decision to
show at least two fractional-seconds digits in most other datetime display
styles. This results in some minor changes in the expected regression test
outputs.
Also, coalesce a lot of repetitive code in datetime.c into subroutines,
for clarity and ease of maintenance. In particular this roughly halves
the number of #ifdef HAVE_INT64_TIMESTAMP segments.
Ron Mayer, with some additional kibitzing from Tom Lane
cases. Recent buildfarm experience shows that it is sometimes possible
to execute several SQL commands in less time than the granularity of
Windows' not-very-high-resolution gettimeofday(), leading to a failure
because the tests expect the value of now() to change and it doesn't.
Also, it was recognized some time ago that the same area of the tests
could fail if local midnight passes between the insertion and the checking
of the values for 'yesterday', 'tomorrow', etc. Clean all this up per
ideas from myself and Greg Stark.
There remains a window for failure if the transaction block is entered
exactly at local midnight (so that 'now' and 'today' have the same value),
but that seems low-probability enough to live with.
Since the point of this change is mostly to eliminate buildfarm noise,
back-patch to all versions we are still actively testing.
this adds support for 64-bit tzdata files, which is needed to support DST
calculations beyond 2038. Add a regression test case to give some minimal
confidence that that really works.
Heikki Linnakangas
historically worked in some but not all cases, but as of 8.2 it failed for all
timezone formats. Fix, and add regression test cases to catch future
regressions in this area. Per gripe from Adam Witney.
to_timestamp():
- ID for day-of-week
- IDDD for day-of-year
This makes it possible to convert ISO week dates to and from text
fully represented in either week ('IYYY-IW-ID') or day-of-year
('IYYY-IDDD') format.
I have also added an 'isoyear' field for use with extract / date_part.
Brendan Jurd
standard convention the 21st century runs from 2001-2100, not 2000-2099,
so make it work like that. Per bug #2885 from Akio Iwaasa.
Backpatch to 8.2, but no further, since this is really a definitional
change; users of older branches are probably more interested in stability.
input routines. Remove the former "DecodePosixTimezone" function in favor of
letting the zic code handle POSIX-style zone specs (see tzparse()). In
particular this means that "PST+3" now means the same as "-03", whereas it
used to mean "-11" --- the zone abbreviation is effectively just a noise word
in this syntax. Make sure that all named and POSIX-style zone names will be
parsed as a single token. Fix long-standing bogosities in printing and input
of fractional-hour timezone offsets (since the tzparse() code will accept
these, we'd better make 'em work). Also correct an error in the original
coding of the zic-zone-name patch: in "timestamp without time zone" input,
zone names are supposed to be allowed but ignored, but the coding was such
that the zone changed the interpretation anyway.
configuration files that can be altered by a DBA. The australian_timezones
GUC setting disappears, replaced by a timezone_abbreviations setting (set this
to 'Australia' to get the effect of australian_timezones). The list of zone
names defined by default has undergone a bit of cleanup, too. Documentation
still needs some work --- in particular, should we fix Table B-4, or just get
rid of it? Joachim Wieland, with some editorializing by moi.
literally.
Add GUC variables:
"escape_string_warning" - warn about backslashes in non-E strings
"escape_string_syntax" - supports E'' syntax?
"standard_compliant_strings" - treats backslashes literally in ''
Update code to use E'' when escapes are used.
than 'datetime BC zone', because the former is accepted by the timestamptz
input converter while the latter may not be depending on spacing. This
is not a loss of compatibility w.r.t. 7.4 and before, because until very
recently there was never a case where we'd output both zone and 'BC'.
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
support for 'week' within the date_trunc function.
Within the patch I added a couple of test cases and associated target
output, and changed the documentation to add 'week' appropriately.
Robert Creager
> > needed, and other people in the past asked about it too.
>
> It is in Oracle, but you aren't exactly on the spot. It should be
>
> IYYY - 4 digits ('2003')
> IYY - 3 digits ('003')
> IY - 2 digits ('03')
> I - 1 digit ('3')
Here is an updated patch that does that.
Kurt Roeckx
SQLSTATE error codes required by SQL99 (invalid format, datetime field
overflow, interval field overflow, invalid time zone displacement value).
Also emit a HINT about DateStyle in cases where it seems appropriate.
Per recent gripes.
heuristic determination of day vs month in date/time input. Add the
ability to specify that input is interpreted as yy-mm-dd order (which
formerly worked, but only for yy greater than 31). DateStyle's input
component now has the preferred spellings DMY, MDY, or YMD; the older
keywords European and US are now aliases for the first two of these.
Per recent discussions on pgsql-general.
datetime token tables. Even more embarrassing, the regression tests
revealed some of the problems --- but evidently the bogus output wasn't
questioned. Add code to postmaster startup to directly check the tables
for correct ordering, in hopes of not being embarrassed like this again.
Use "--enable-integer-datetimes" in configuration to use this rather
than the original float8 storage. I would recommend the integer-based
storage for any platform on which it is available. We perhaps should
make this the default for the production release.
Change timezone(timestamptz) results to return timestamp rather than
a character string. Formerly, we didn't have a way to represent
timestamps with an explicit time zone other than freezing the info into
a string. Now, we can reasonably omit the explicit time zone from the
result and return a timestamp with values appropriate for the specified
time zone. Much cleaner, and if you need the time zone in the result
you can put it into a character string pretty easily anyway.
Allow fractional seconds in date/time types even for dates prior to 1BC.
Limit timestamp data types to 6 decimal places of precision. Just right
for a micro-second storage of int8 date/time types, and reduces the
number of places ad-hoc rounding was occuring for the float8-based types.
Use lookup tables for precision/rounding calculations for timestamp and
interval types. Formerly used pow() to calculate the desired value but
with a more limited range there is no reason to not type in a lookup
table. Should be *much* better performance, though formerly there were
some optimizations to help minimize the number of times pow() was called.
Define a HAVE_INT64_TIMESTAMP variable. Based on the configure option
"--enable-integer-datetimes" and the existing internal INT64_IS_BUSTED.
Add explicit date/interval operators and functions for addition and
subtraction. Formerly relied on implicit type promotion from date to
timestamp with time zone.
Change timezone conversion functions for the timetz type from "timetz()"
to "timezone()". This is consistant with other time zone coersion
functions for other types.
Bump the catalog version to 200204201.
Fix up regression tests to reflect changes in fractional seconds
representation for date/times in BC eras.
All regression tests pass on my Linux box.
timestamp/timestamptz combo. Now extract/date_part returns
seconds*1000 or 1000000 + fraction part as the manual stats.
regression test are also fixed.
See the thread in pgsql-hackers:
Subject: Re: [HACKERS] timestamp_part() bug?
Date: Sat, 02 Mar 2002 11:29:53 +0900
Mask both typmod subfields for INTERVAL to avoid setting the high bit,
per dire warning from Tom Lane.
Clear tmask for DTK_ISO_TIME case to avoid time zone troubles.
Symptom reported by Tom Lane.
Clean up checking for valid time zone info in output routine.
This should now work for both SQL99 and Unix-style time zones.
Put in explicit check for INTERVAL() typmod rounding to avoid accumulating
cruft in the lower bits. Not sure that this helps, but we'll need to do
something. The symptom is visible with a query like
select interval(2) '10000 days 01:02:03.040506';
Regression tests are patched to repair the Tom Lane symptom, and all pass.
Modified the parser and the SET handlers to use full Node structures
rather than simply a character string argument.
Implement INTERVAL() YEAR TO MONTH (etc) syntax per SQL99.
Does not yet accept the goofy string format that goes along with, but
this should be fairly straight forward to fix now as a bug or later
as a feature.
Implement precision for the INTERVAL() type.
Use the typmod mechanism for both of INTERVAL features.
Fix the INTERVAL syntax in the parser:
opt_interval was in the wrong place.
INTERVAL is now a reserved word, otherwise we get reduce/reduce errors.
Implement an explicit date_part() function for TIMETZ.
Should fix coersion problem with INTERVAL reported by Peter E.
Fix up some error messages for date/time types.
Use all caps for type names within message.
Fix recently introduced side-effect bug disabling 'epoch' as a recognized
field for date_part() etc. Reported by Peter E. (??)
Bump catalog version number.
Rename "microseconds" current transaction time field
from ...Msec to ...Usec. Duh!
date/time regression tests updated for reference platform, but a few
changes will be necessary for others.
time zones.
SQL99 spec requires a default of zero (round to seconds) which is set
in gram.y as typmod is set in the parse tree. We *could* change to a
default of either 6 (for internal compatibility with previous versions)
or 2 (for external compatibility with previous versions).
Evaluate entries in pg_proc wrt the iscachable attribute for timestamp and
other date/time types. Try to recognize cases where side effects like the
current time zone setting may have an effect on results to decide whether
something is cachable or not.
Bruce Momjian
Peter Eisentraut
Tom Lane
Alvaro Herrera
Thomas G. Lockhart
Tatsuo Ishii