Documentation for pg_restore said COPY TO does not support row security
when in fact it should say COPY FROM. Fix that.
While at it, make it clear that "COPY FROM" does not allow RLS to be
enabled and INSERT should be used instead. Also that SELECT policies
will apply to COPY TO statements.
Back-patch to 9.5 where RLS first appeared.
Author: Joe Conway
Reviewed-By: Dean Rasheed and Robert Haas
Discussion: https://postgr.es/m/5744FA24.3030008%40joeconway.com
This is similar to the -N option in pg_dump, except that it doesn't take
a pattern, just like the existing -n option in pg_restore.
From: Michael Banck <michael.banck@credativ.de>
Patch provides command line option --strict-names which requires that at
least one table/schema should present for each -t/-n option.
Pavel Stehule <pavel.stehule@gmail.com>
-t will now match views, foreign tables, materialized views, and sequences,
not only plain tables. This is more useful, and also more consistent with
the behavior of pg_dump's -t switch, which has always matched all relation
types.
We're still not there on matching pg_dump's behavior entirely, so mention
that in the docs.
Craig Ringer, reviewed by Pavel Stehule
The commit c22ed3d523 turned
the -i/--ignore-version options into no-ops and marked as deprecated.
Considering we shipped that in 8.4, it's time to remove all trace of
those switches, per discussion. We'd still have to wait a couple releases
before it'd be safe to use -i for something else, but it'd be a start.
Buildfarm member tick identified an issue where the policies in the
relcache for a relation were were being replaced underneath a running
query, leading to segfaults while processing the policies to be added
to a query. Similar to how TupleDesc RuleLocks are handled, add in a
equalRSDesc() function to check if the policies have actually changed
and, if not, swap back the rsdesc field (using the original instead of
the temporairly built one; the whole structure is swapped and then
specific fields swapped back). This now passes a CLOBBER_CACHE_ALWAYS
for me and should resolve the buildfarm error.
In addition to addressing this, add a new chapter in Data Definition
under Privileges which explains row security and provides examples of
its usage, change \d to always list policies (even if row security is
disabled- but note that it is disabled, or enabled with no policies),
rework check_role_for_policy (it really didn't need the entire policy,
but it did need to be using has_privs_of_role()), and change the field
in pg_class to relrowsecurity from relhasrowsecurity, based on
Heikki's suggestion. Also from Heikki, only issue SET ROW_SECURITY in
pg_restore when talking to a 9.5+ server, list Bypass RLS in \du, and
document --enable-row-security options for pg_dump and pg_restore.
Lastly, fix a number of minor whitespace and typo issues from Heikki,
Dimitri, add a missing #include, per Peter E, fix a few minor
variable-assigned-but-not-used and resource leak issues from Coverity
and add tab completion for role attribute bypassrls as well.
This option makes pg_dump, pg_dumpall and pg_restore inject an IF EXISTS
clause to each DROP command they emit. (In pg_dumpall, the clause is
not added to individual objects drops, but rather to the CREATE DATABASE
commands, as well as CREATE ROLE and CREATE TABLESPACE.)
This allows for a better user dump experience when using --clean in case
some objects do not already exist. Per bug #7873 by Dave Rolsky.
Author: Pavel Stěhule
Reviewed-by: Jeevan Chalke, Álvaro Herrera, Josh Kupershmidt
DocBook XML is superficially compatible with DocBook SGML but has a
slightly stricter DTD that we have been violating in a few cases.
Although XSLT doesn't care whether the document is valid, the style
sheets don't necessarily process invalid documents correctly, so we need
to work toward fixing this.
This first commit moves the indexterms in refentry elements to an
allowed position. It has no impact on the output.
We already did this for -t (--table) in 9.3, but missed the other similar
options. For consistency, allow all of them to be specified multiple times.
Unfortunately it's too late to sneak this into 9.3, so commit to master
only.
On top of the previous support in pg_dump, add support to specify
multiple tables (by using the -t option multiple times) to
pg_restore, clsuterdb, reindexdb and vacuumdb.
Josh Kupershmidt, reviewed by Karl O. Pinc
In commit 4317e0246c, I accidentally broke
this behavior while rearranging code to ensure that --create wouldn't
affect whether a DATABASE entry gets put into archive-format output.
Thus, 9.2 would issue a DROP DATABASE command in --clean mode, which is
either useless or dangerous depending on the usage scenario.
It should not do that, and no longer does.
A bright spot is that this refactoring makes it easy to allow the
combination of --clean and --create to work sensibly, ie, emit DROP
DATABASE then CREATE DATABASE before reconnecting. Ordinarily we'd
consider that a feature addition and not back-patch it, but it seems
silly to not include the extra couple of lines required in the 9.2
version of the code.
Per report from Guillaume Lelarge, though this is slightly more extensive
than his proposed patch.
The initial implementation of pg_dump's --section option supposed that the
existing --schema-only and --data-only options could be made equivalent to
--section settings. This is wrong, though, due to dubious but long since
set-in-stone decisions about where to dump SEQUENCE SET items, as seen in
bug report from Martin Pitt. (And I'm not totally convinced there weren't
other bugs, either.) Undo that coupling and instead drive --section
filtering off current-section state tracked as we scan through the TOC
list to call _tocEntryRequired().
To make sure those decisions don't shift around and hopefully save a few
cycles, run _tocEntryRequired() only once per TOC entry and save the result
in a new TOC field. This required minor rejiggering of ACL handling but
also allows a far cleaner implementation of inhibit_data_for_failed_table.
Also, to ensure that pg_dump and pg_restore have the same behavior with
respect to the --section switches, add _tocEntryRequired() filtering to
WriteToc() and WriteDataChunks(), rather than trying to implement section
filtering in an entirely orthogonal way in dumpDumpableObject(). This
required adjusting the handling of the special ENCODING and STDSTRINGS
items, but they were pretty weird before anyway.
Minor other code review for the patch, too.
The default for the choice attribute of the <arg> element is "opt",
which would normally put the argument inside brackets. But the DSSSL
stylesheets contain a hack that treats <arg> directly inside <group>
specially, so that <group><arg>-x</arg><arg>-y</arg></group> comes out
as [ -x | -y ] rather than [ [-x] | [-y] ], which it would technically
be. But when building man pages, this doesn't work, and so the
command synopses on the man pages contain lots of extra brackets.
By putting choice="opt" or choice="plain" explicitly on every <arg>
and <group> element, we avoid any toolchain dependencies like that,
and it also makes it clearer in the source code what is meant.
In passing, make some small corrections in the documentation about
which arguments are really optional or not.
Valid values are --pre-data, data and post-data. The option can be
given more than once. --schema-only is equivalent to
--section=pre-data --section=post-data. --data-only is equivalent
to --section=data.
Andrew Dunstan, reviewed by Joachim Wieland and Josh Berkus.
There is what may actually be a mistake in our markup. The problem is
in a situation like
<para>
<command>FOO</command> is ...
there is strictly speaking a line break before "FOO". In the HTML
output, this does not appear to be a problem, but in the man page
output, this shows up, so you get double blank lines at odd places.
So far, we have attempted to work around this with an XSL hack, but
that causes other problems, such as creating run-ins in places like
<acronym>SQL</acronym> <command>COPY</command>
So fix the problem properly by removing the extra whitespace. I only
fixed the problems that affect the man page output, not all the
places.
For the --help output and reference pages of pg_dump, pg_dumpall,
pg_restore, put the options in some consistent, mostly alphabetical,
and consistent order, rather than newest option last or something like
that.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
post-data step is run in a separate worker child (a thread on Windows, a child
process elsewhere) up to the concurrent number specified by the new pg_restore
command-line --multi-thread | -m switch.
Andrew Dunstan, with some editing by Tom Lane.
performing dumps and restores in accordance with a security policy that
forbids logging in directly as superuser, but instead specifies that you
should log into an admin account and then SET ROLE to the superuser.
In passing, clean up some ugly and mostly-broken code for quoting shell
arguments in pg_dumpall.
Benedek László, with some help from Tom Lane
the server version check is now always enforced. Relax the version check to
allow a server that is of pg_dump's own major version but a later minor
version; this is the only case that -i was at all safe to use in.
pg_restore already enforced only a very weak version check, so this is
really just a documentation change for it.
Per discussion.
dumps can be loaded into databases without the same tablespaces that the
source had. The option acts by suppressing all "SET default_tablespace"
commands, and also CREATE TABLESPACE commands in pg_dumpall's case.
Gavin Roy, with documentation and minor fixes by me.
parentheses in syntax descriptions. Consistently use the present tense
when describing the basic purpose of each "DROP" command. Add a few
more hyperlinks.
Peter Eisentraut
Joe Conway
Teodor Sigaev
Tom Lane
Fujii Masao
Stephen Frost
Alvaro Herrera
Heikki Linnakangas
Magnus Hagander
Bruce Momjian
Andrew Dunstan
Robert Haas
Neil Conway