Fix some places where pgindent did silly stuff, often because project
style wasn't followed to begin with. (I've not touched the atomics
headers, though.)
Remove a bunch of "extern Datum foo(PG_FUNCTION_ARGS);" declarations that
are no longer needed now that PG_FUNCTION_INFO_V1(foo) provides that.
Some of these were evidently missed in commit e7128e8dbb, but others
were cargo-culted in in code added since then. Possibly that can be blamed
in part on the fact that we'd not fixed relevant documentation examples,
which I've now done.
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
Defer lookup of opfamily and input type of a of a user specified opclass
until the optimizer selects among available unique indexes; and store
the opclass in the parse analyzed tree instead. The primary reason for
doing this is that for rule deparsing it's easier to use the opclass
than the previous representation.
While at it also rename a variable in the inference code to better fit
it's purpose.
This is separate from the actual fixes for deparsing to make review
easier.
The plain C string language name needs to be wrapped in makeString() so
that the parse tree is copyable. This is detectable by
-DCOPY_PARSE_PLAN_TREES. Add a test case for the COMMENT case.
Also make the quoting in the error messages more consistent.
discovered by Tom Lane
This has been the predominant outcome. When the output of decrypting
with a wrong key coincidentally resembled an OpenPGP packet header,
pgcrypto could instead report "Corrupt data", "Not text data" or
"Unsupported compression algorithm". The distinct "Corrupt data"
message added no value. The latter two error messages misled when the
decrypted payload also exhibited fundamental integrity problems. Worse,
error message variance in other systems has enabled cryptologic attacks;
see RFC 4880 section "14. Security Considerations". Whether these
pgcrypto behaviors are likewise exploitable is unknown.
In passing, document that pgcrypto does not resist side-channel attacks.
Back-patch to 9.0 (all supported versions).
Security: CVE-2015-3167
The previous coding in hstore_plpython and ltree_plpython wiped out any
values set by the base makefiles. This at least had the effect of running
the tests in "regression" not "contrib_regression" as expected. These
being pretty new modules, there might be other bad effects we'd not
noticed yet.
This SQL standard functionality allows to aggregate data by different
GROUP BY clauses at once. Each grouping set returns rows with columns
grouped by in other sets set to NULL.
This could previously be achieved by doing each grouping as a separate
query, conjoined by UNION ALLs. Besides being considerably more concise,
grouping sets will in many cases be faster, requiring only one scan over
the underlying data.
The current implementation of grouping sets only supports using sorting
for input. Individual sets that share a sort order are computed in one
pass. If there are sets that don't share a sort order, additional sort &
aggregation steps are performed. These additional passes are sourced by
the previous sort step; thus avoiding repeated scans of the source data.
The code is structured in a way that adding support for purely using
hash aggregation or a mix of hashing and sorting is possible. Sorting
was chosen to be supported first, as it is the most generic method of
implementation.
Instead of, as in an earlier versions of the patch, representing the
chain of sort and aggregation steps as full blown planner and executor
nodes, all but the first sort are performed inside the aggregation node
itself. This avoids the need to do some unusual gymnastics to handle
having to return aggregated and non-aggregated tuples from underlying
nodes, as well as having to shut down underlying nodes early to limit
memory usage. The optimizer still builds Sort/Agg node to describe each
phase, but they're not part of the plan tree, but instead additional
data for the aggregation node. They're a convenient and preexisting way
to describe aggregation and sorting. The first (and possibly only) sort
step is still performed as a separate execution step. That retains
similarity with existing group by plans, makes rescans fairly simple,
avoids very deep plans (leading to slow explains) and easily allows to
avoid the sorting step if the underlying data is sorted by other means.
A somewhat ugly side of this patch is having to deal with a grammar
ambiguity between the new CUBE keyword and the cube extension/functions
named cube (and rollup). To avoid breaking existing deployments of the
cube extension it has not been renamed, neither has cube been made a
reserved keyword. Instead precedence hacking is used to make GROUP BY
cube(..) refer to the CUBE grouping sets feature, and not the function
cube(). To actually group by a function cube(), unlikely as that might
be, the function name has to be quoted.
Needs a catversion bump because stored rules may change.
Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund
Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas
Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule
Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com
For upcoming BRIN opclasses, it's convenient to have strategy numbers
defined in a single place. Since there's nothing appropriate, create
it. The StrategyNumber typedef now lives there, as well as existing
strategy numbers for B-trees (from skey.h) and R-tree-and-friends (from
gist.h). skey.h is forced to include stratnum.h because of the
StrategyNumber typedef, but gist.h is not; extensions that currently
rely on gist.h for rtree strategy numbers might need to add a new
A few .c files can stop including skey.h and/or gist.h, which is a nice
side benefit.
Per discussion:
https://www.postgresql.org/message-id/20150514232132.GZ2523@alvh.no-ip.org
Authored by Emre Hasegeli and Álvaro.
(It's not clear to me why bootscanner.l has any #include lines at all.)
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
No need to have pg_audit.conf any longer since the regression tests are
just loading the module at the start of each session (to simulate being
in shared_preload_libraries, which isn't something we can actually make
happen on the buildfarm itself, it seems).
Pointed out by Tom
In pg_audit, set client_min_messages up to warning, then reset the role
attributes, to completely reset the session while not making the
regression tests depend on being run by any particular user.
Instead of creating a new superuser role, extract out what the current
user is and use that user instead. Further, clean up and drop all
objects created by the regression test.
Pointed out by Tom.
Also, use a function to load the extension ahead of all other calls,
simulating load from shared_libraries_preload, to make sure the
hooks are in place before logging start.
Remove the check that pg_audit be installed by
shared_preload_libraries as that's not going to work when running the
regressions tests in the buildfarm. That check was primairly a nice to
have and isn't required anyway.
This extension provides detailed logging classes, ability to control
logging at a per-object level, and includes fully-qualified object
names for logged statements (DML and DDL) in independent fields of the
log output.
Authors: Ian Barwick, Abhijit Menon-Sen, David Steele
Reviews by: Robert Haas, Tatsuo Ishii, Sawada Masahiko, Fujii Masao,
Simon Riggs
Discussion with: Josh Berkus, Jaime Casanova, Peter Eisentraut,
David Fetter, Yeb Havinga, Alvaro Herrera, Petr Jelinek, Tom Lane,
MauMau, Bruce Momjian, Jim Nasby, Michael Paquier,
Fabrízio de Royes Mello, Neil Tiffin
If a postgres_fdw foreign table is a non-locked source relation in an
UPDATE, DELETE, or SELECT FOR UPDATE/SHARE, and the query selects its
ctid column, the wrong value would be returned if an EvalPlanQual
recheck occurred. This happened because the foreign table's result row
was copied via the ROW_MARK_COPY code path, and EvalPlanQualFetchRowMarks
just unconditionally set the reconstructed tuple's t_self to "invalid".
To fix that, we can have EvalPlanQualFetchRowMarks copy the composite
datum's t_ctid field, and be sure to initialize that along with t_self
when postgres_fdw constructs a tuple to return.
If we just did that much then EvalPlanQualFetchRowMarks would start
returning "(0,0)" as ctid for all other ROW_MARK_COPY cases, which perhaps
does not matter much, but then again maybe it might. The cause of that is
that heap_form_tuple, which is the ultimate source of all composite datums,
simply leaves t_ctid as zeroes in newly constructed tuples. That seems
like a bad idea on general principles: a field that's really not been
initialized shouldn't appear to have a valid value. So let's eat the
trivial additional overhead of doing "ItemPointerSetInvalid(&(td->t_ctid))"
in heap_form_tuple.
This closes out our handling of Etsuro Fujita's report that tableoid and
ctid weren't correctly set in postgres_fdw EvalPlanQual cases. Along the
way we did a great deal of work to improve FDWs' ability to control row
locking behavior; which was not wasted effort by any means, but it didn't
end up being a fix for this problem because that feature would be too
expensive for postgres_fdw to use all the time.
Although the fix for the tableoid misbehavior was back-patched, I'm
hesitant to do so here; it seems far less likely that people would care
about remote ctid than tableoid, and even such a minor behavioral change
as this in heap_form_tuple is perhaps best not back-patched. So commit
to HEAD only, at least for the moment.
Etsuro Fujita, with some adjustments by me
The new function allows to estimate bloat and other table level statics
in a faster, but approximate, way. It does so by using information from
the free space map for pages marked as all visible in the visibility
map. The rest of the table is actually read and free space/bloat is
measured accurately. In many cases that allows to get bloat information
much quicker, causing less IO.
Author: Abhijit Menon-Sen
Reviewed-By: Andres Freund, Amit Kapila and Tomas Vondra
Discussion: 20140402214144.GA28681@kea.toroid.org
Commit e7cb7ee145 included some design
decisions that seem pretty questionable to me, and there was quite a lot
of stuff not to like about the documentation and comments. Clean up
as follows:
* Consider foreign joins only between foreign tables on the same server,
rather than between any two foreign tables with the same underlying FDW
handler function. In most if not all cases, the FDW would simply have had
to apply the same-server restriction itself (far more expensively, both for
lack of caching and because it would be repeated for each combination of
input sub-joins), or else risk nasty bugs. Anyone who's really intent on
doing something outside this restriction can always use the
set_join_pathlist_hook.
* Rename fdw_ps_tlist/custom_ps_tlist to fdw_scan_tlist/custom_scan_tlist
to better reflect what they're for, and allow these custom scan tlists
to be used even for base relations.
* Change make_foreignscan() API to include passing the fdw_scan_tlist
value, since the FDW is required to set that. Backwards compatibility
doesn't seem like an adequate reason to expect FDWs to set it in some
ad-hoc extra step, and anyway existing FDWs can just pass NIL.
* Change the API of path-generating subroutines of add_paths_to_joinrel,
and in particular that of GetForeignJoinPaths and set_join_pathlist_hook,
so that various less-used parameters are passed in a struct rather than
as separate parameter-list entries. The objective here is to reduce the
probability that future additions to those parameter lists will result in
source-level API breaks for users of these hooks. It's possible that this
is even a small win for the core code, since most CPU architectures can't
pass more than half a dozen parameters efficiently anyway. I kept root,
joinrel, outerrel, innerrel, and jointype as separate parameters to reduce
code churn in joinpath.c --- in particular, putting jointype into the
struct would have been problematic because of the subroutines' habit of
changing their local copies of that variable.
* Avoid ad-hocery in ExecAssignScanProjectionInfo. It was probably all
right for it to know about IndexOnlyScan, but if the list is to grow
we should refactor the knowledge out to the callers.
* Restore nodeForeignscan.c's previous use of the relcache to avoid
extra GetFdwRoutine lookups for base-relation scans.
* Lots of cleanup of documentation and missed comments. Re-order some
code additions into more logical places.
The new type has the scope of whole the database cluster so it doesn't
behave the same as the existing OID alias types which have database
scope,
concerning object dependency. To avoid confusion constants of the new
type are prohibited from appearing where dependencies are made involving
it.
Also, add a note to the docs about possible MVCC violation and
optimization issues, which are general over the all reg* types.
Kyotaro Horiguchi
Buildfarm member magpie sorted the output differently than intended by
Peter. "Resolve" the problem by simply not aggregating, it's not that
many lines.
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
Previously, relation range table entries used a single Bitmapset field
representing which columns required either UPDATE or INSERT privileges,
despite the fact that INSERT and UPDATE privileges are separately
cataloged, and may be independently held. As statements so far required
either insert or update privileges but never both, that was
sufficient. The required permission could be inferred from the top level
statement run.
The upcoming INSERT ... ON CONFLICT UPDATE feature needs to
independently check for both privileges in one statement though, so that
is not sufficient anymore.
Bumps catversion as stored rules change.
Author: Peter Geoghegan
Reviewed-By: Andres Freund
The minmax opclass was using the wrong support functions when
cross-datatypes queries were run. Instead of trying to fix the
pg_amproc definitions (which apparently is not possible), use the
already correct pg_amop entries instead. This requires jumping through
more hoops (read: extra syscache lookups) to obtain the underlying
functions to execute, but it is necessary for correctness.
Author: Emre Hasegeli, tweaked by Álvaro
Review: Andreas Karlsson
Also change BrinOpcInfo to record each stored type's typecache entry
instead of just the OID. Turns out that the full type cache is
necessary in brin_deform_tuple: the original code used the indexed
type's byval and typlen properties to extract the stored tuple, which is
correct in Minmax; but in other implementations that want to store
something different, that's wrong. The realization that this is a bug
comes from Emre also, but I did not use his patch.
I also adopted Emre's regression test code (with smallish changes),
which is more complete.
These functions should return SETOF TEXT[], like the core functions they
are wrappers for; but they were incorrectly declared as returning just
TEXT[]. This mistake had two results: first, if there was no match you got
a scalar null result, whereas what you should get is an empty set (zero
rows). Second, the 'g' flag was effectively ignored, since you would get
only one result array even if there were multiple matches, as reported by
Jeff Certain.
While ignoring 'g' is a clear bug, the behavior for no matches might well
have been thought to be the intended behavior by people who hadn't compared
it carefully to the core regexp_matches() functions. So we should tread
carefully about introducing this change in the back branches. Still, it
clearly is a bug and so providing some fix is desirable.
After discussion, the conclusion was to introduce the change in a 1.1
version of the citext extension (as we would need to do anyway); 1.0 still
contains the incorrect behavior. 1.1 is the default and only available
version in HEAD, but it is optional in the back branches, where 1.0 remains
the default version. People wishing to adopt the fix in back branches will
need to explicitly do ALTER EXTENSION citext UPDATE TO '1.1'. (I also
provided a downgrade script in the back branches, so people could go back
to 1.0 if necessary.)
This should be called out as an incompatible change in the 9.5 release
notes, although we'll also document it in the next set of back-branch
release notes. The notes should mention that any views or rules that use
citext's regexp_matches() functions will need to be dropped before
upgrading to 1.1, and then recreated again afterwards.
Back-patch to 9.1. The bug goes all the way back to citext's introduction
in 8.4, but pre-9.1 there is no extension mechanism with which to manage
the change. Given the lack of previous complaints it seems unnecessary to
change this behavior in 9.0, anyway.
These modules were all missing essential Windows scaffolding, including
resources files and descriptions, and links to the relevant library
import files. This latter item means that the modules can't be built
with pgxs on Windows, as we don't install the import files. If we ever
decide to install them this restriction could probably be removed.
Also, as with plperl we need to make sure that perl's CORE directory is
last on the include list, as on Windows it appears to contain some
headers with names that clash with names of some headers we include.
Combine the two places that set CPPFLAGS into one. Also, some settings
should be restricted to Windows only. More precisely, -Wno-comment is
a GCC-only option, but Windows in a makefile implies GCC at the moment.
Also, since -Wno-comment is more properly a preprocessor option, move it
to CPPFLAGS to simplify things a bit.
This involves moving perl's CORE library to the end of the include list,
and adding other compilation settings that plperl uses. This won't
completely fix the breakage currently being seen by gcc builds on
Windows, but it will let the build get further, and should be wholly
benign, if not beneficial, on *nix.
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
The "check" target no longer needs to depend on "all", because it now
runs "install" directly, which in turn depends on "all". Doing both
will cause problems with parallel make, because two builds will run next
to each other.
Also remove the redirection of the temp-install output into a log file.
This was appropriate when this was done from within pg_regress, but now
it's just a regular make run, and especially with the above changes this
will now take the place of running the "all" target before the test
suites.
problem report by Jeff Janes, patch in part by Michael Paquier
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
Before, make check-world would create a new temporary installation for
each test suite, which is slow and wasteful. Instead, we now create one
test installation that is used by all test suites that are part of a
make run.
The management of the temporary installation is removed from pg_regress
and handled in the makefiles. This allows for better control, and
unifies the code with that of test suites not run through pg_regress.
review and msvc support by Michael Paquier <michael.paquier@gmail.com>
more review by Fabien Coelho <coelho@cri.ensmp.fr>
As noted by Etsuro Fujita [1] and Dean Rasheed[2],
cb1ca4d800 changed ExecBuildAuxRowMark()
to always look for the tableoid in the target list, but didn't also
change preprocess_targetlist() to always include the tableoid. This
resulted in errors with soon-to-be-added RLS with inheritance tests,
and errors when using inheritance with foreign tables.
Authors: Etsuro Fujita and Dean Rasheed (independently)
Minor word-smithing on the comments by me.
[1] 552CF0B6.8010006@lab.ntt.co.jp
[2] CAEZATCVmFUfUOwwhnBTcgi6AquyjQ0-1fyKd0T3xBWJvn+xsFA@mail.gmail.com
Right now it is visible whether a replication slot is active in any
session, but not in which. Adding the active_in column, containing the
pid of the backend having acquired the slot, makes it much easier to
associate pg_replication_slots entries with the corresponding
pg_stat_replication/pg_stat_activity row.
This should have been done from the start, but I (Andres) dropped the
ball there somehow.
Author: Craig Ringer, revised by me Discussion:
CAMsr+YFKgZca5_7_ouaMWxA5PneJC9LNViPzpDHusaPhU9pA7g@mail.gmail.com
Previously, these functions were created in a schema "binary_upgrade",
which was deleted after pg_upgrade was finished. Because we don't want
to keep that schema around permanently, move them to pg_catalog but
rename them with a binary_upgrade_... prefix.
The provided functions are only small wrappers around global variables
that were added specifically for pg_upgrade use, so keeping the module
separate does not create any modularity.
The functions still check that they are only called in binary upgrade
mode, so it is not possible to call these during normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
Locking and updating the same tuple repeatedly led to some strange
multixacts being created which had several subtransactions of the same
parent transaction holding locks of the same strength. However,
once a subxact of the current transaction holds a lock of a given
strength, it's not necessary to acquire the same lock again. This made
some coding patterns much slower than required.
The fix is twofold. First we change HeapTupleSatisfiesUpdate to return
HeapTupleBeingUpdated for the case where the current transaction is
already a single-xid locker for the given tuple; it used to return
HeapTupleMayBeUpdated for that case. The new logic is simpler, and the
change to pgrowlocks is a testament to that: previously we needed to
check for the single-xid locker separately in a very ugly way. That
test is simpler now.
As fallout from the HTSU change, some of its callers need to be amended
so that tuple-locked-by-own-transaction is taken into account in the
BeingUpdated case rather than the MayBeUpdated case. For many of them
there is no difference; but heap_delete() and heap_update now check
explicitely and do not grab tuple lock in that case.
The HTSU change also means that routine MultiXactHasRunningRemoteMembers
introduced in commit 11ac4c73cb is no longer necessary and can be
removed; the case that used to require it is now handled naturally as
result of the changes to heap_delete and heap_update.
The second part of the fix to the performance issue is to adjust
heap_lock_tuple to avoid the slowness:
1. Previously we checked for the case that our own transaction already
held a strong enough lock and returned MayBeUpdated, but only in the
multixact case. Now we do it for the plain Xid case as well, which
saves having to LockTuple.
2. If the current transaction is the only locker of the tuple (but with
a lock not as strong as what we need; otherwise it would have been
caught in the check mentioned above), we can skip sleeping on the
multixact, and instead go straight to create an updated multixact with
the additional lock strength.
3. Most importantly, make sure that both the single-xid-locker case and
the multixact-locker case optimization are applied always. We do this
by checking both in a single place, rather than them appearing in two
separate portions of the routine -- something that is made possible by
the HeapTupleSatisfiesUpdate API change. Previously we would only check
for the single-xid case when HTSU returned MayBeUpdated, and only
checked for the multixact case when HTSU returned BeingUpdated. This
was at odds with what HTSU actually returned in one case: if our own
transaction was locker in a multixact, it returned MayBeUpdated, so the
optimization never applied. This is what led to the large multixacts in
the first place.
Per bug report #8470 by Oskari Saarenmaa.
This would have been worth doing on general principle anyway, but the
recent addition of an expression syntax to pgbench makes it an even
better idea than it would have been otherwise.
Fabien Coelho
In 83ff1618 we defined integer limits iff they're not provided by the
system. That turns out not to be the greatest idea because there's
different ways some datatypes can be represented. E.g. on OSX PG's 64bit
datatype will be a 'long int', but OSX unconditionally uses 'long
long'. That disparity then can lead to warnings, e.g. around printf
formats.
One way to fix that would be to back int64 using stdint.h's
int64_t. While a good idea it's not that easy to implement. We would
e.g. need to include stdint.h in our external headers, which we don't
today. Also computing the correct int64 printf formats in that case is
nontrivial.
Instead simply prefix the integer limits with PG_ and define them
unconditionally. I've adjusted all the references to them in code, but
not the ones in comments; the latter seems unnecessary to me.
Discussion: 20150331141423.GK4878@alap3.anarazel.de
As with initdb these programs need to run with a restricted token, and
if they don't pg_upgrade will fail when run as a user with Adminstrator
privileges.
Backpatch to all live branches. On the development branch the code is
reorganized so that the restricted token code is now in a single
location. On the stable bramches a less invasive change is made by
simply copying the relevant code to pg_upgrade.c and pg_resetxlog.c.
Patches and bug report from Muhammad Asif Naeem, reviewed by Michael
Paquier, slightly edited by me.
The previous coding in get_const_expr() tried to avoid quoting integer,
float, and numeric literals if at all possible. While that looks nice,
it means that dumped expressions might re-parse to something that's
semantically equivalent but not the exact same parsetree; for example
a FLOAT8 constant would re-parse as a NUMERIC constant with a cast to
FLOAT8. Though the result would be the same after constant-folding,
this is problematic in certain contexts. In particular, Jeff Davis
pointed out that this could cause unexpected failures in ALTER INHERIT
operations because of child tables having not-exactly-equivalent CHECK
expressions. Therefore, favor correctness over legibility and dump
such constants in quotes except in the limited cases where they'll
be interpreted as the same type even without any casting.
This results in assorted small changes in the regression test outputs,
and will affect display of user-defined views and rules similarly.
The odds of that causing problems in the field seem non-negligible;
given the lack of previous complaints, it seems best not to change
this in the back branches.
Get rid of unnecessary expr_yylex declaration (we haven't supported
flex 2.5.4 in a long time, and even if we still did, the declaration in
pgbench.h makes this one unnecessary and inappropriate). Fix copyright
dates, improve some layout choices, etc.
We can use that macro as long as we put the value into a local variable.
Commit 735cd6128 was not wrong on its own terms, but I think this way
looks nicer, and it should save a few cycles on 32-bit machines.
The stddev calculation included a faster but unportable sqrt function.
This is not worth the extra effort, and won't work everywhere. If the
standard library function is good enough for the SQL function it
should be good enough here too.
inet, cidr, and timetz indexes still cannot support index-only scans,
because they don't store the original unmodified value in the index, but a
derived approximate value.
Stddev is calculated on the fly, and the code in commit 717f709532 was
using Float8GetDatumFast() inappropriately to convert the result to a
Datum. Mea culpa. It now uses Float8GetDatum().
The new fields are min_time, max_time, mean_time and stddev_time.
Based on an original patch from Mitsumasa KONDO, modified by me. Reviewed by Petr Jelínek.
The gbt_var_key_copy function was doing two different things depending on
the boolean argument. Seems cleaner to have two separate functions.
Remove unused argument from gbt_num_compress.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
It's all very well to claim that a simplistic sort is fast in easy
cases, but O(N^2) in the worst case is not good ... especially if the
worst case is as easy to hit as "descending order input". Replace that
bit with our standard qsort.
Per bug #12866 from Maksym Boguk. Back-patch to all active branches.
This patch fixes two inadequacies of the PlanRowMark representation.
First, that the original LockingClauseStrength isn't stored (and cannot be
inferred for foreign tables, which always get ROW_MARK_COPY). Since some
PlanRowMarks are created out of whole cloth and don't actually have an
ancestral RowMarkClause, this requires adding a dummy LCS_NONE value to
enum LockingClauseStrength, which is fairly annoying but the alternatives
seem worse. This fix allows getting rid of the use of get_parse_rowmark()
in FDWs (as per the discussion around commits 462bd95705 and
8ec8760fc8), and it simplifies some things elsewhere.
Second, that the representation assumed that all child tables in an
inheritance hierarchy would use the same RowMarkType. That's true today
but will soon not be true. We add an "allMarkTypes" field that identifies
the union of mark types used in all a parent table's children, and use
that where appropriate (currently, only in preprocess_targetlist()).
In passing fix a couple of minor infelicities left over from the SKIP
LOCKED patch, notably that _outPlanRowMark still thought waitPolicy
is a bool.
Catversion bump is required because the numeric values of enum
LockingClauseStrength can appear in on-disk rules.
Extracted from a much larger patch to support foreign table inheritance;
it seemed worth breaking this out, since it's a separable concern.
Shigeru Hanada and Etsuro Fujita, somewhat modified by me
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
... which is the usual convention among AMs, so that pg_filedump and
similar utilities can tell apart pages of different AMs. It was also
the intent of the original code, but I failed to realize that alignment
considerations would move the whole thing to the previous-to-last word
in the page.
The new definition of the associated macro makes surrounding code a bit
leaner, too.
Per note from Heikki at
http://www.postgresql.org/message-id/546A16EF.9070005@vmware.com
This makes it easier to write frontend programs that needs to understand
the WAL record format of CREATE/DROP DATABASE. dbcommands.h cannot easily
be #included in a frontend program, because it pulls in other header files
that need backend stuff, but the new dbcommands_xlog.h header file has
fewer dependencies.
My commit 878fdcb843 was not quite
right. Tom Lane pointed out one of the mistakes fixed here, and I
noticed the other myself while reviewing what I'd committed.
Previously, you could do \set variable operand1 operator operand2, but
nothing more complicated. Now, you can \set variable expression, which
makes it much simpler to do multi-step calculations here. This also
adds support for the modulo operator (%), with the same semantics as in
C.
Robert Haas and Fabien Coelho, reviewed by Álvaro Herrera and
Stephen Frost
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
We can't really fix the problem that the result is defined to depend on
random(), so it is still going to fail the "unstable input conversion"
test in parse_type.c. However, we can at least satify valgrind. (It
looks like this code used to be valgrind-clean, actually, until somebody
did a careless s/strncpy/strlcpy/g on it.)
In passing, let's just make real sure that chkpass_out doesn't overrun
its output buffer.
No need for backpatch, I think, since this is just to satisfy debugging
tools.
Asif Naeem
To get CRC functionality in a client program, you now need to link with
libpgcommon instead of libpgport. The CRC code has nothing to do with
portability, so libpgcommon is a better home. (libpgcommon didn't exist
when pg_crc.c was originally moved to src/port.)
Remove the possibility to get CRC functionality by just #including
pg_crc_tables.h. I'm not aware of any extensions that actually did that and
couldn't simply link with libpgcommon.
This also moves the pg_crc.h header file from src/include/utils to
src/include/common, which will require changes to any external programs
that currently does #include "utils/pg_crc.h". That seems acceptable, as
include/common is clearly the right home for it now, and the change needed
to any such programs is trivial.
Commit 13629df changed metaphone() function to return an empty string on
empty input, but it left the old error message in place. It's now dead code.
Michael Paquier, per Coverity warning.
This function uses uninitialized stack and heap buffers as supplementary
entropy sources. Mark them so Memcheck will not complain. Back-patch
to 9.4, where Valgrind Memcheck cooperation first appeared.
Marko Tiikkaja
This covers alterations to buffer sizing and zeroing made between imath
1.3 and imath 1.20. Valgrind Memcheck identified the buffer overruns
and reliance on uninitialized data; their exploit potential is unknown.
Builds specifying --with-openssl are unaffected, because they use the
OpenSSL BIGNUM facility instead of imath. Back-patch to 9.0 (all
supported versions).
Security: CVE-2015-0243
Most callers pass a stack buffer. The ensuing stack smash can crash the
server, and we have not ruled out the viability of attacks that lead to
privilege escalation. Back-patch to 9.0 (all supported versions).
Marko Tiikkaja
Security: CVE-2015-0243
Coverity points out that mdc_finish returns a pointer to a local buffer
(which of course is gone as soon as the function returns), leaving open
a risk of misbehaviors possibly as bad as a stack overwrite.
In reality, the only possible call site is in process_data_packets()
which does not examine the returned pointer at all. So there's no
live bug, but nonetheless the code is confusing and risky. Refactor
to avoid the issue by letting process_data_packets() call mdc_finish()
directly instead of going through the pullf_read() API.
Although this is only cosmetic, it seems good to back-patch so that
the logic in pgp-decrypt.c stays in sync across all branches.
Marko Kreen
connectby() didn't adequately check that the constructed SQL query returns
what it's expected to; in fact, since commit 08c33c426b it wasn't
checking that at all. This could result in a null-pointer-dereference
crash if the constructed query returns only one column instead of the
expected two. Less excitingly, it could also result in surprising data
conversion failures if the constructed query returned values that were
not I/O-conversion-compatible with the types specified by the query
calling connectby().
In all branches, insist that the query return at least two columns;
this seems like a minimal sanity check that can't break any reasonable
use-cases.
In HEAD, insist that the constructed query return the types specified by
the outer query, including checking for typmod incompatibility, which the
code never did even before it got broken. This is to hide the fact that
the implementation does a conversion to text and back; someday we might
want to improve that.
In back branches, leave that alone, since adding a type check in a minor
release is more likely to break things than make people happy. Type
inconsistencies will continue to work so long as the actual type and
declared type are I/O representation compatible, and otherwise will fail
the same way they used to.
Also, in all branches, be on guard for NULL results from the constructed
query, which formerly would cause null-pointer dereference crashes.
We now print the row with the NULL but don't recurse down from it.
In passing, get rid of the rather pointless idea that
build_tuplestore_recursively() should return the same tuplestore that's
passed to it.
Michael Paquier, adjusted somewhat by me
Benchmarks has shown that aligning the buffer descriptor array to
cache lines is important for scalability; especially on bigger,
multi-socket, machines.
Currently the array sometimes already happens to be aligned by
happenstance, depending how large previous shared memory allocations
were. That can lead to wildly varying performance results after minor
configuration changes.
In addition to aligning the start of descriptor array, also force the
size of individual descriptors to be of a common cache line size (64
bytes). That happens to already be the case on 64bit platforms, but
this way we can change the struct BufferDesc more easily.
As the alignment primarily matters in highly concurrent workloads
which probably all are 64bit these days, and the space wastage of
element alignment would be a bit more noticeable on 32bit systems, we
don't force the stride to be cacheline sized on 32bit platforms for
now. If somebody does actual performance testing, we can reevaluate
that decision by changing the definition of BUFFERDESC_PADDED_SIZE.
Discussion: 20140202151319.GD32123@awork2.anarazel.de
Per discussion with Bruce Momjan, Tom Lane, Robert Haas, and Peter
Geoghegan.
gist_poly_compress() and gist_circle_compress() checked for a NULL-pointer
key argument, but that was dead code; the gist code never passes a
NULL-pointer to the "compress" method.
This commit also removes a documentation note added in commit a0a3883,
about doing NULL-pointer checks in the "compress" method. It was added
based on the fact that some implementations were doing NULL-pointer
checks, but those checks were unnecessary in the first place.
The NULL-pointer check in gbt_var_same() function was also unnecessary.
The arguments to the "same" method come from the "compress", "union", or
"picksplit" methods, but none of them return a NULL pointer.
None of this is to be confused with SQL NULL values. Those are dealt with
by the gist machinery, and are never passed to the GiST opclass methods.
Michael Paquier
Some fields of the sinfo struct are modified within PG_TRY and then
referenced within PG_CATCH, so as with recent patch to async.c, "volatile"
is necessary for strict POSIX compliance; and that propagates to a couple
of subroutines as well as materializeQueryResult() itself. I think the
risk of actual issues here is probably higher than in async.c, because
storeQueryResult() is likely to get inlined into materializeQueryResult(),
leaving the compiler free to conclude that its stores into sinfo fields are
dead code.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
contrib/pg_stat_statements will sometimes run the core lexer a second time
on submitted statements. Formerly, if you had standard_conforming_strings
turned off, this led to sometimes getting two copies of any warnings
enabled by escape_string_warning. While this is probably no longer a big
deal in the field, it's a pain for regression testing.
To fix, change the lexer so it doesn't consult the escape_string_warning
GUC variable directly, but looks at a copy in the core_yy_extra_type state
struct. Then, pg_stat_statements can change that copy to disable warnings
while it's redoing the lexing.
It seemed like a good idea to make this happen for all three of the GUCs
consulted by the lexer, not just escape_string_warning. There's not an
immediate use-case for callers to adjust the other two AFAIK, but making
it possible is easy enough and seems like good future-proofing.
Arguably this is a bug fix, but there doesn't seem to be enough interest to
justify a back-patch. We'd not be able to back-patch exactly as-is anyway,
for fear of breaking ABI compatibility of the struct. (We could perhaps
back-patch the addition of only escape_string_warning by adding it at the
end of the struct, where there's currently alignment padding space.)
The folly of the previous arrangement was just demonstrated: there's no
convenient way to add fields to ExplainState without breaking ABI, even
if callers have no need to touch those fields. Since we might well need
to do that again someday in back branches, let's change things so that
only explain.c has to have sizeof(ExplainState) compiled into it. This
costs one extra palloc() per EXPLAIN operation, which is surely pretty
negligible.
Previously, read() might have returned a length equal to the buffer
length, and then the subsequent store to buf[len] would write a
zero-byte one byte past the end. This doesn't seem likely to be
a security issue, but there's some chance it could result in
pg_standby misbehaving.
Spotted by Coverity; patch by Michael Paquier, reviewed by me.
Previously the computation of the total test duration, measured in
microseconds, accidentally overflowed due to accidentally using signed
32bit arithmetic. As the only consequence is that pg_test_timing
invocations with such, overly large, durations never finished the
practical consequences of this bug are minor.
Pointed out by Coverity.
Backpatch to 9.2 where pg_test_timing was added.
In the unlikely case of stdin (fd 0) being closed, the off-by-one
would lead to pg_xlogdump failing to open files.
Spotted by Coverity.
Backpatch to 9.3 where pg_xlogdump was introduced.
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
Use SSPI authentication to allow connections exclusively from the OS
user that launched the test suite. This closes on Windows the
vulnerability that commit be76a6d39e
closed on other platforms. Users of "make installcheck" or custom test
harnesses can run "pg_regress --config-auth=DATADIR" to activate the
same authentication configuration that "make check" would use.
Back-patch to 9.0 (all supported versions).
Security: CVE-2014-0067
As with NOT NULL constraints, we consider that such constraints are merely
reports of constraints that are being enforced by the remote server (or
other underlying storage mechanism). Their only real use is to allow
planner optimizations, for example in constraint-exclusion checks. Thus,
the code changes here amount to little more than removal of the error that
was formerly thrown for applying CHECK to a foreign table.
(In passing, do a bit of cleanup of the ALTER FOREIGN TABLE reference page,
which had accumulated some weird decisions about ordering etc.)
Shigeru Hanada and Etsuro Fujita, reviewed by Kyotaro Horiguchi and
Ashutosh Bapat.
If the called command fails to return data, runShellCommand forgot to
pclose() the pipe before returning. This is fairly harmless in the current
code, because pgbench would then abandon further processing of that client
thread; so no more than nclients descriptors could be leaked this way. But
it's not hard to imagine future improvements whereby that wouldn't be true.
In any case, it's sloppy coding, so patch all branches. Found by Coverity.
In commit 462bd95705, I changed postgres_fdw
to rely on get_plan_rowmark() instead of get_parse_rowmark(). I still
think that's a good idea in the long run, but as Etsuro Fujita pointed out,
it doesn't work today because planner.c forces PlanRowMarks to have
markType = ROW_MARK_COPY for all foreign tables. There's no urgent reason
to change this in the back branches, so let's just revert that part of
yesterday's commit rather than trying to design a better solution under
time pressure.
Also, add a regression test case showing what postgres_fdw does with FOR
UPDATE/SHARE. I'd blithely assumed there was one already, else I'd have
realized yesterday that this code didn't work.
Ordinarily we can omit checking of a WHERE condition that matches a partial
index's condition, when we are using an indexscan on that partial index.
However, in SELECT FOR UPDATE we must include the "redundant" filter
condition in the plan so that it gets checked properly in an EvalPlanQual
recheck. The planner got this mostly right, but improperly omitted the
filter condition if the index in question was on an inheritance child
table. In READ COMMITTED mode, this could result in incorrectly returning
just-updated rows that no longer satisfy the filter condition.
The cause of the error is using get_parse_rowmark() when get_plan_rowmark()
is what should be used during planning. In 9.3 and up, also fix the same
mistake in contrib/postgres_fdw. It's currently harmless there (for lack
of inheritance support) but wrong is wrong, and the incorrect code might
get copied to someplace where it's more significant.
Report and fix by Kyotaro Horiguchi. Back-patch to all supported branches.
dblink and postgres_fdw use SHLIB_PREREQS = submake-libpq to build libpq
first. This doesn't work in a PGXS build, because there is no libpq to
build. So just omit setting SHLIB_PREREQS in this case.
Note that PGXS users can still use SHLIB_PREREQS (although it is not
documented). The problem here is only that contrib modules can be built
in-tree or using PGXS, and the prerequisite is only applicable in the
former case.
Commit 6697aa2bc2 previously attempted to
address this by creating a somewhat fake submake-libpq target in
Makefile.global. That was not the right fix, and it was also done in a
nonportable way, so revert that.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
The logical decoding patchset introduced PROC_IN_LOGICAL_DECODING flag
PGXACT flag, that allows such backends to be skipped when computing
the xmin horizon/snapshots. That's fine and sensible for walsenders
streaming out logical changes, but not at all fine for SQL backends
doing logical decoding. If the latter set that flag any change they
have performed outside of logical decoding will not be regarded as
visible - which e.g. can lead to that change being vacuumed away.
Note that not setting the flag for SQL backends isn't particularly
bothersome - the SQL backend doesn't do streaming, so it only runs for
a limited amount of time.
Per buildfarm member 'tick' and Alvaro.
Backpatch to 9.4, where logical decoding was introduced.
We expose a function IsValidJsonNumber that internally calls the lexer
for json numbers. That allows us to use the same test everywhere,
instead of inventing a broken test for hstore conversions. The new
function is also used in datum_to_json, replacing the code that is now
moved to the new function.
Backpatch to 9.3 where hstore_to_json_loose was introduced.
This is advance preparation for introducing even more test modules; the
easy solution is to add them to contrib, but that's bloated enough that
it seems a good time to think of something different.
Moved modules are dummy_seclabel, test_shm_mq, test_parser and
worker_spi.
(test_decoding was also a candidate, but there was too much opposition
to moving that one. We can always reconsider later.)
This patch adds a way of iterating through the members of a bitmapset
nondestructively, unlike the old way with bms_first_member(). While
bms_next_member() is very slightly slower than bms_first_member()
(at least for typical-size bitmapsets), eliminating the need to palloc
and pfree a temporary copy of the target bitmapset is a significant win.
So this method should be preferred in all cases where a temporary copy
would be necessary.
Tom Lane, with suggestions from Dean Rasheed and David Rowley
Mark Simonetti reported that libxslt sometimes crashes for him, and that
swapping xslt_process's object-freeing calls around to do them in reverse
order of creation seemed to fix it. I've not reproduced the crash, but
valgrind clearly shows a reference to already-freed memory, which is
consistent with the idea that shutdown of the xsltTransformContext is
trying to reference the already-freed stylesheet or input document.
With this patch, valgrind is no longer unhappy.
I have an inquiry in to see if this is a libxslt bug or if we're just
abusing the library; but even if it's a library bug, we'd want to adjust
our code so it doesn't fail with unpatched libraries.
Back-patch to all supported branches, because we've been doing this in
the wrong(?) order for a long time.
Code that check the flag no longer need #ifdef's, which is more convenient.
In particular, makes it easier to write extensions that depend on it.
In the passing, modify sslinfo's ssl_is_used function to check ssl_in_use
instead of the OpenSSL specific 'ssl' pointer. It doesn't make any
difference currently, as sslinfo is only compiled when built with OpenSSL,
but seems cleaner anyway.
postgres_fdw would send query conditions involving system columns to the
remote server, even though it makes no effort to ensure that system
columns other than CTID match what the remote side thinks. tableoid,
in particular, probably won't match and might have some use in queries.
Hence, prevent sending conditions that include non-CTID system columns.
Also, create_foreignscan_plan neglected to check local restriction
conditions while determining whether to set fsSystemCol for a foreign
scan plan node. This again would bollix the results for queries that
test a foreign table's tableoid.
Back-patch the first fix to 9.3 where postgres_fdw was introduced.
Back-patch the second to 9.2. The code is probably broken in 9.1 as
well, but the patch doesn't apply cleanly there; given the weak state
of support for FDWs in 9.1, it doesn't seem worth fixing.
Etsuro Fujita, reviewed by Ashutosh Bapat, and somewhat modified by me
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
There are basically three situations in which logical decoding needs
to perform cache invalidation. During/After replaying a transaction
with catalog changes, when skipping a uninteresting transaction that
performed catalog changes and when erroring out while replaying a
transaction. Unfortunately these three cases were all done slightly
differently - partially because 8de3e410fa, which greatly simplifies
matters, got committed in the midst of the development of logical
decoding.
The actually problematic case was when logical decoding skipped
transaction commits (and thus processed invalidations). When used via
the SQL interface cache invalidation could access the catalog - bad,
because we didn't set up enough state to allow that correctly. It'd
not be hard to setup sufficient state, but the simpler solution is to
always perform cache invalidation outside a valid transaction.
Also make the different cache invalidation cases look as similar as
possible, to ease code review.
This fixes the assertion failure reported by Antonin Houska in
53EE02D9.7040702@gmail.com. The presented testcase has been expanded
into a regression test.
Backpatch to 9.4, where logical decoding was introduced.
The hope is that we can use this to produce better diagnostics in
some cases.
Peter Geoghegan, reviewed by Michael Paquier, with some further
changes by me.
Heikki noticed in 544E23C0.8090605@vmware.com that slot.c and
snapbuild.c were missing the FIN_CRC32 call when computing/checking
checksums of on disk files. That doesn't lower the the error detection
capabilities of the checksum, but is inconsistent with other usages.
In a followup mail Heikki also noticed that, contrary to a comment,
the 'version' and 'length' struct fields of replication slot's on disk
data where not covered by the checksum. That's not likely to lead to
actually missed corruption as those fields are cross checked with the
expected version and the actual file length. But it's wrong
nonetheless.
As fixing these issues makes existing on disk files unreadable, bump
the expected versions of on disk files for both slots and logical
decoding historic catalog snapshots. This means that loading old
files will fail with
ERROR: "replication slot file ... has unsupported version 1"
and
ERROR: "snapbuild state file ... has unsupported version 1 instead of
2" respectively. Given the low likelihood of anybody already using
these new features in a production setup that seems acceptable.
Fixing these issues made me notice that there's no regression test
covering the loading of historic snapshot from disk - so add one.
Backpatch to 9.4 where these features were introduced.
Currently the extension's pg_prewarm() function didn't check
interrupts once it started "warming" data. Since individual calls can
take a long while it's important for them to be interruptible.
Backpatch to 9.4 where pg_prewarm was introduced.
This fixes a scenario in which pgp_sym_decrypt() failed with "Wrong key
or corrupt data" on messages whose length is 6 less than a power of 2.
Per bug #11905 from Connor Penhale. Fix by Marko Tiikkaja, regression
test case from Jeff Janes.
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
In general, datatype I/O functions are supposed to be immutable or at
worst stable. Some contrib I/O functions were, through oversight, not
marked with any volatility property at all, which made them VOLATILE.
Since (most of) these functions actually behave immutably, the erroneous
marking isn't terribly harmful; but it can be user-visible in certain
circumstances, as per a recent bug report from Joe Van Dyk in which a
cast to text was disallowed in an expression index definition.
To fix, just adjust the declarations in the extension SQL scripts. If we
were being very fussy about this, we'd bump the extension version numbers,
but that seems like more trouble (for both developers and users) than the
problem is worth.
A fly in the ointment is that chkpass_in actually is volatile, because
of its use of random() to generate a fresh salt when presented with a
not-yet-encrypted password. This is bad because of the general assumption
that I/O functions aren't volatile: the consequence is that records or
arrays containing chkpass elements may have input behavior a bit different
from a bare chkpass column. But there seems no way to fix this without
breaking existing usage patterns for chkpass, and the consequences of the
inconsistency don't seem bad enough to justify that. So for the moment,
just document it in a comment.
Since we're not bumping version numbers, there seems no harm in
back-patching these fixes; at least future installations will get the
functions marked correctly.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
pgp_sym_encrypt's option is spelled "sess-key", not "enable-session-key".
Spotted by Jeff Janes.
In passing, improve a comment in pgp-pgsql.c to make it clearer that
the debugging options are intentionally undocumented.
Apparently, computers are now a bit faster than when this was first
added, so we need to make room for a digit or two in the ops/sec format.
While we're at it, adjust some of the other output for a more consistent
line length.
Up to now, PG has assumed that any given timezone abbreviation (such as
"EDT") represents a constant GMT offset in the usage of any particular
region; we had a way to configure what that offset was, but not for it
to be changeable over time. But, as with most things horological, this
view of the world is too simplistic: there are numerous regions that have
at one time or another switched to a different GMT offset but kept using
the same timezone abbreviation. Almost the entire Russian Federation did
that a few years ago, and later this month they're going to do it again.
And there are similar examples all over the world.
To cope with this, invent the notion of a "dynamic timezone abbreviation",
which is one that is referenced to a particular underlying timezone
(as defined in the IANA timezone database) and means whatever it currently
means in that zone. For zones that use or have used daylight-savings time,
the standard and DST abbreviations continue to have the property that you
can specify standard or DST time and get that time offset whether or not
DST was theoretically in effect at the time. However, the abbreviations
mean what they meant at the time in question (or most recently before that
time) rather than being absolutely fixed.
The standard abbreviation-list files have been changed to use this behavior
for abbreviations that have actually varied in meaning since 1970. The
old simple-numeric definitions are kept for abbreviations that have not
changed, since they are a bit faster to resolve.
While this is clearly a new feature, it seems necessary to back-patch it
into all active branches, because otherwise use of Russian zone
abbreviations is going to become even more problematic than it already was.
This change supersedes the changes in commit 513d06ded et al to modify the
fixed meanings of the Russian abbreviations; since we've not shipped that
yet, this will avoid an undesirably incompatible (not to mention incorrect)
change in behavior for timestamps between 2011 and 2014.
This patch makes some cosmetic changes in ecpglib to keep its usage of
datetime lookup tables as similar as possible to the backend code, but
doesn't do anything about the increasingly obsolete set of timezone
abbreviation definitions that are hard-wired into ecpglib. Whatever we
do about that will likely not be appropriate material for back-patching.
Also, a potential free() of a garbage pointer after an out-of-memory
failure in ecpglib has been fixed.
This patch also fixes pre-existing bugs in DetermineTimeZoneOffset() that
caused it to produce unexpected results near a timezone transition, if
both the "before" and "after" states are marked as standard time. We'd
only ever thought about or tested transitions between standard and DST
time, but that's not what's happening when a zone simply redefines their
base GMT offset.
In passing, update the SGML documentation to refer to the Olson/zoneinfo/
zic timezone database as the "IANA" database, since it's now being
maintained under the auspices of IANA.
We've gotten enough push-back on that change to make it clear that it
wasn't an especially good idea to do it like that. Revert plain EXPLAIN
to its previous behavior, but keep the extra output in EXPLAIN ANALYZE.
Per discussion.
Internally, I set this up as a separate flag ExplainState.summary that
controls printing of planning time and execution time. For now it's
just copied from the ANALYZE option, but we could consider exposing it
to users.
This allows transactions that take longer than specified limit to be counted
separately. With --rate, transactions that are already late by the time we
get to execute them are skipped altogether. Using --latency-limit with
--rate allows you to "catch up" more quickly, if there's a hickup in the
server causing a lot of transactions to stall momentarily.
Fabien COELHO, reviewed by Rukh Meski and heavily refactored by me.
Lc_collate and lc_ctype have been per-database settings since server version
8.4, but pg_upgrade was still treating them as cluster-wide options. It
fetched the values for the template0 databases in old and new cluster, and
compared them. That's backwards; the encoding and locale of the template0
database doesn't matter, as template0 is guaranteed to contain only ASCII
characters. But if there are any other databases that exist on both clusters
(in particular template1 and postgres databases), their encodings and
locales must be compatible.
Also, make the locale comparison more lenient. If the locale names are not
equal, try to canonicalize both of them by passing them to setlocale(). We
used to do that only when upgrading from 9.1 or below, but it seems like a
good idea even with newer versions. If we change the canonical form of a
locale, this allows pg_upgrade to still work. I'm about to do just that to
fix bug #11431, by mapping a locale name that contains non-ASCII characters
to a pure-ASCII alias of the same locale.
No backpatching, because earlier versions of pg_upgrade still support
upgrading from 8.3 servers. That would be more complicated, so it doesn't
seem worth it, given that we haven't received any complaints about this
from users.
This add a new pgp_armor_headers function to extract armor headers from an
ASCII-armored blob, and a new overloaded variant of the armor function, for
constructing an ASCII-armor with extra headers.
Marko Tiikkaja and me.
That get rids of the only -Wempty-body warning when compiling postgres
with gcc 4.8/9. As 6550b901f shows, it's useful to be able to use that
option routinely.
Without asserts there's many more warnings, but that's food for
another commit.
Instead of trying to accurately calculate the space needed, use a StringInfo
that's enlarged as needed. This is just moving things around currently - the
old code was not wrong - but this is in preparation for a patch that adds
support for extra armor headers, and would make the space calculation more
complicated.
Marko Tiikkaja
There are four weaknesses in728f152e07f998d2cb4fe5f24ec8da2c3bda98f2:
* append_init() in heapdesc.c was ugly and required that rm_identify
return values are only valid till the next call. Instead just add a
couple more switch() cases for the INIT_PAGE cases. Now the returned
value will always be valid.
* a couple rm_identify() callbacks missed masking xl_info with
~XLR_INFO_MASK.
* pg_xlogdump didn't map a NULL rm_identify to UNKNOWN or a similar
string.
* append_init() was called when id=NULL - which should never actually
happen. But it's better to be careful.
This has been broken since commit af7914c662,
which added the EXPLAIN (TIMING) option. Although that commit included
updates to auto_explain, they evidently weren't tested very carefully,
because the code failed to print node timings even when it should, due to
failure to set es.timing in the ExplainState struct. Reported off-list by
Neelakanth Nadgir of Salesforce.
In passing, clean up the documentation for auto_explain's options a
little bit, including re-ordering them into what seems to me a more
logical order.
The new --stats/--stats=record options to pg_xlogdump display per
rmgr/per record statistics about the parsed WAL. This is useful to
understand what the WAL primarily consists of, to allow targeted
optimizations on application, configuration, and core code level.
It is likely that we will want to fine tune the statistics further,
but the feature already is quite helpful.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Andres Freund, Dilip Kumar and Furuya Osamu
Discussion: 20140604104716.GA3989@toroid.org
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
The previous coding first generated a uniform random value between 0.0 and
1.0, then converted that to an integer between 1 and 10000, and divided that
again by 10000. Those conversions are unnecessary; we can use the double
value that pg_erand48() returns directly. While we're at it, put the logic
into a helper function, getPoissonRand().
The largest delay generated by the old coding was about 9.2 times the
average, because of the way the uniformly distributed value used for the
calculation was truncated to 1/10000 granularity. The new coding doesn't
have such clamping. With my laptop's DBL_MIN value, the maximum delay with
the new coding is about 700x the average. That seems acceptable - any
reasonable pgbench session should last long enough to average that out.
Backpatch to 9.4.
The reported latency values now include the "schedule lag" time, that is,
the time between the transaction's scheduled start time and the time it
actually started. This relates better to a model where requests arrive at a
certain rate, and we are interested in the response time to the end user or
application, rather than the response time of the database itself.
Also, when --rate is used, include the schedule lag time in the log output.
The --rate option is new in 9.4, so backpatch to 9.4. It seems better to
make this change in 9.4, while we're still in the beta period, than ship a
9.4 version that calculates the values differently than 9.5.
The regression tests for contrib/test_decoding regularly failed on
postgres instances that were very slow. Either because the hardware
itself was slow or because very expensive debugging options like
CLOBBER_CACHE_ALWAYS were used.
The reason they failed was just that some additional transactions were
decoded. Analyze and vacuum, triggered by autovac.
To fix just add a option to test_decoding to only display transactions
in which a change was actually displayed. That's not pretty because it
removes information from the tests; but better than constantly failing
tests in very likely harmless ways.
Backpatch to 9.4 where logical decoding was introduced.
Discussion: 20140629142511.GA26930@awork2.anarazel.de
Since the dawn of time (aka Postgres95) multiple pins of the same
buffer by one backend have been optimized not to modify the shared
refcount more than once. This optimization has always used a NBuffer
sized array in each backend keeping track of a backend's pins.
That array (PrivateRefCount) was one of the biggest per-backend memory
allocations, depending on the shared_buffers setting. Besides the
waste of memory it also has proven to be a performance bottleneck when
assertions are enabled as we make sure that there's no remaining pins
left at the end of transactions. Also, on servers with lots of memory
and a correspondingly high shared_buffers setting the amount of random
memory accesses can also lead to poor cpu cache efficiency.
Because of these reasons a backend's buffers pins are now kept track
of in a small statically sized array that overflows into a hash table
when necessary. Benchmarks have shown neutral to positive performance
results with considerably lower memory usage.
Patch by me, review by Robert Haas.
Discussion: 20140321182231.GA17111@alap3.anarazel.de
In commit 45e02e3232, we intentionally
disallowed updates on individual elements of oidvector columns. While that
still seems like a sane idea in the abstract, we (I) forgot that citext's
"upgrade from unpackaged" script did in fact perform exactly such updates,
in order to fix the problem that citext indexes should have a collation
but would not in databases dumped or upgraded from pre-9.1 installations.
Even if we wanted to add casts to allow such updates, there's no practical
way to do so in the back branches, so the only real alternative is to make
citext's kluge even klugier. In this patch, I cast the oidvector to text,
fix its contents with regexp_replace, and cast back to oidvector. (Ugh!)
Since the aforementioned commit went into all active branches, we have to
fix this in all branches that contain the now-broken update script.
Per report from Eric Malm.
That allows to run those tests against a postmaster listening on a
nonstandard port without requiring to export PGPORT in postmaster's
environment.
This still doesn't support connecting to a nondefault host without
configuring it in postmaster's environment. That's harder and less
frequently used though. So this is a useful step.
That allows parallel installcheck to succeed inside contrib/. The
output is not particularly pretty unless make's -O option to
synchronize the output is used.
There's other tests, outside contrib, that use a hardcoded,
non-unique, database name. Those prohibit paralell installcheck to be
used across more directories; but that's something for a separate
patch.
Prevent automatic oid assignment when in binary upgrade mode. Also
throw an error when contrib/pg_upgrade_support functions are called when
not in binary upgrade mode.
This prevent automatically-assigned oids from conflicting with later
pre-assigned oids coming from the old cluster. It also makes sure oids
are preserved in call important cases.
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
We also don't track PREPARE, nor do we track planning time in general, so
let's ignore DEALLOCATE as well for consistency.
Backpatch to 9.4, but not further than that. Although it seems unlikely that
anyone is relying on the current behavior, this is a behavioral change.
Fabien Coelho
The new column shows how many backends have a buffer pinned. That can
be useful during development or to diagnose production issues
e.g. caused by vacuum waiting for cleanup locks.
To handle upgrades transparently - the extension might be used in
views - deal with callers expecting the old number of columns.
Reviewed by Fujii Masao and Rajeev rastogi.
strncmp() is a specialized API unsuited for routine copying into
fixed-size buffers. On a system where the length of a single filename
can exceed MAXPGPATH, the pg_archivecleanup change prevents a simple
crash in the subsequent strlen(). Few filesystems support names that
long, and calling pg_archivecleanup with untrusted input is still not a
credible use case. Therefore, no back-patch.
David Rowley
Now benchmarking options such as -c cannot be used if initializing
option (-i) is specified. Also initializing options such as -F cannot
be used if initializing option is not specified.
Tatsuo Ishii and Fabien COELHO.
Previously, TOAST tables only required in the new cluster could cause
oid conflicts if they were auto-numbered and a later conflicting oid had
to be assigned.
Backpatch through 9.3
autovacuum_multixact_freeze_max_age was added as a pg_ctl start
parameter in 9.3.X to prevent autovacuum from running. However, only
some 9.3.X releases have autovacuum_multixact_freeze_max_age as it was
added in a minor PG 9.3 release. It also isn't needed because -b turns
off autovacuum in 9.1+.
Without this fix, trying to upgrade from an early 9.3 release to 9.4
would fail.
Report by EDB
Backpatch through 9.3
Commit 0ac5ad5134 removed an optimization in multixact.c that skipped
fetching members of MultiXactId that were older than our
OldestVisibleMXactId value. The reason this was removed is that it is
possible for multixacts that contain updates to be older than that
value. However, if the caller is certain that the multi does not
contain an update (because the infomask bits say so), it can pass this
info down to GetMultiXactIdMembers, enabling it to use the old
optimization.
Pointed out by Andres Freund in 20131121200517.GM7240@alap2.anarazel.de
get_raw_page tried to validate the supplied block number against
RelationGetNumberOfBlocks(), which of course is only right when
accessing the main fork. In most cases, the main fork is longer
than the others, so that the check was too weak (allowing a
lower-level error to be reported, but no real harm to be done).
However, very small tables could have an FSM larger than their heap,
in which case the mistake prevented access to some FSM pages.
Per report from Torsten Foertsch.
In passing, make the bad-block-number error into an ereport not elog
(since it's certainly not an internal error); and fix sloppily
maintained comment for RelationGetNumberOfBlocksInFork.
This has been wrong since we invented relation forks, so back-patch
to all supported branches.
With OpenLDAP versions 2.4.24 through 2.4.31, inclusive, PostgreSQL
backends can crash at exit. Raise a warning during "configure" based on
the compile-time OpenLDAP version number, and test the crash scenario in
the dblink test suite. Back-patch to 9.0 (all supported versions).
ws2_32 is the new version of the library that should be used, as
it contains the require functionality from wsock32 as well as some
more (which is why some binaries were already using ws2_32).
Michael Paquier, reviewed by MauMau
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
Commit 1b86c81d2d fixed the decoding of toasted columns for the rows
contained in one xl_heap_multi_insert record. But that's not actually
enough, because heap_multi_insert() will actually first toast all
passed in rows and then emit several *_multi_insert records; one for
each page it fills with tuples.
Add a XLOG_HEAP_LAST_MULTI_INSERT flag which is set in
xl_heap_multi_insert->flag denoting that this multi_insert record is
the last emitted by one heap_multi_insert() call. Then use that flag
in decode.c to only set clear_toast_afterwards in the right situation.
Expand the number of rows inserted via COPY in the corresponding
regression test to make sure that more than one heap page is filled
with tuples by one heap_multi_insert() call.
Backpatch to 9.4 like the previous commit.
This command provides an automated way to create foreign table definitions
that match remote tables, thereby reducing tedium and chances for error.
In this patch, we provide the necessary core-server infrastructure and
implement the feature fully in the postgres_fdw foreign-data wrapper.
Other wrappers will throw a "feature not supported" error until/unless
they are updated.
Ronan Dunklau and Michael Paquier, additional work by me
Previously, when calculations on the need for toast tables changed,
pg_upgrade could not handle cases where the new cluster needed a TOAST
table and the old cluster did not. (It already handled the opposite
case.) This fixes the "OID mismatch" error typically generated in this
case.
Backpatch through 9.2
When decoding the results of a HEAP2_MULTI_INSERT (currently only
generated by COPY FROM) toast columns for all but the last tuple
weren't replaced by their actual contents before being handed to the
output plugin. The reassembled toast datums where disregarded after
every REORDER_BUFFER_CHANGE_(INSERT|UPDATE|DELETE) which is correct
for plain inserts, updates, deletes, but not multi inserts - there we
generate several REORDER_BUFFER_CHANGE_INSERTs for a single
xl_heap_multi_insert record.
To solve the problem add a clear_toast_afterwards boolean to
ReorderBufferChange's union member that's used by modifications. All
row changes but multi_inserts always set that to true, but
multi_insert sets it only for the last change generated.
Add a regression test covering decoding of multi_inserts - there was
none at all before.
Backpatch to 9.4 where logical decoding was introduced.
Bug found by Petr Jelinek.
The isxdigit() calls relied on undefined behavior. The isascii() call
was well-defined, but our prevailing style is to include the cast.
Back-patch to 9.4, where the isxdigit() calls were introduced.
Historically these database properties could be manipulated only by
manually updating pg_database, which is error-prone and only possible for
superusers. But there seems no good reason not to allow database owners to
set them for their databases, so invent CREATE/ALTER DATABASE options to do
that. Adjust a couple of places that were doing it the hard way to use the
commands instead.
Vik Fearing, reviewed by Pavel Stehule
The output buffer size in unaccent_lexize() was calculated as input string
length times pg_database_encoding_max_length(), which effectively assumes
that replacement strings aren't more than one character. While that was
all that we previously documented it to support, the code actually has
always allowed replacement strings of arbitrary length; so if you tried
to make use of longer strings, you were at risk of buffer overrun. To fix,
use an expansible StringInfo buffer instead of trying to determine the
maximum space needed a-priori.
This would be a security issue if unaccent rules files could be installed
by unprivileged users; but fortunately they can't, so in the back branches
the problem can be labeled as improper configuration by a superuser.
Nonetheless, a memory stomp isn't a nice way of reacting to improper
configuration, so let's back-patch the fix.
We were already issuing a WARNING, albeit only elog not ereport, for
duplicate source strings; so warning rather than just being stoically
silent seems like the best thing to do here. Arguably both of these
complaints should be upgraded to ERRORs, but that might be more
behavioral change than people want.
Note: the faulty line is already printed via an errcontext hook,
so there's no need for more information than these messages provide.
This could be useful in languages where diacritic signs are represented as
separate characters; more generally it supports using unaccent dictionaries
for substring substitutions beyond narrowly conceived "diacritic removal".
In any case, since the rule-file parser doesn't complain about
multi-character source strings, it behooves us to do something unsurprising
with them.
This is useful in languages where diacritic signs are represented as
separate characters; it's also one step towards letting unaccent be used
for arbitrary substring substitutions.
In passing, improve the user documentation for unaccent, which was sadly
vague about some important details.
Mohammad Alhashash, reviewed by Abhijit Menon-Sen
There were some C comments that hadn't been updated from the switch of
using only pg_dumpall to using pg_dump and pg_dumpall, so update them.
Also, don't bother using --schema-only for pg_dumpall --globals-only.
Backpatch through 9.4
This function continued to use it after heap_endscan() freed it. In
passing, don't explicit create a strategy here. Instead, use the one
created by heap_beginscan_strat(), if any. Back-patch to 9.2, where use
of a BufferAccessStrategy here was introduced.
This fixes a bug that caused vacuum to fail when the '0000' files left
by initdb were accessed as part of vacuum's cleanup of old pg_multixact
files.
Backpatch through 9.3
dblink uses a short-lived data conversion memory context. However it
was not deleted when no longer needed, leading to a noticeable memory
leak under some circumstances. Plug the hole, along with minor
refactoring. Backpatch to 9.2 where the leak was introduced.
Report and initial patch by MauMau. Reviewed/modified slightly by
Tom Lane and me.
Give passwords to each user created in support of an ECPG connection
test case. Use SET SESSION AUTHORIZATION, not a fresh connection, to
reduce privileges during a dblink test case.
To test against such a server, both the "make installcheck-world"
environment and the postmaster environment must provide the default
user's password; $PGPASSFILE is the principal way to do so. (The
postmaster environment needs it for dblink and postgres_fdw tests.)
Arrange for postmaster child processes to respond to two environment
variables, PG_OOM_ADJUST_FILE and PG_OOM_ADJUST_VALUE, to determine whether
they reset their OOM score adjustments and if so to what. This is superior
to the previous design involving #ifdef's in several ways. The behavior is
now available in a default build, and both ends of the adjustment --- the
original adjustment of the postmaster's level and the subsequent
readjustment by child processes --- can now be controlled in one place,
namely the postmaster launch script. So it's no longer necessary for the
launch script to act on faith that the server was compiled with the
appropriate options. In addition, if someone wants to use an OOM score
other than zero for the child processes, that doesn't take a recompile
anymore; and we no longer have to cater separately to the two different
historical kernel APIs for this adjustment.
Gurjeet Singh, somewhat revised by me
This SQL-standard feature allows a sub-SELECT yielding multiple columns
(but only one row) to be used to compute the new values of several columns
to be updated. While the same results can be had with an independent
sub-SELECT per column, such a workaround can require a great deal of
duplicated computation.
The standard actually says that the source for a multi-column assignment
could be any row-valued expression. The implementation used here is
tightly tied to our existing sub-SELECT support and can't handle other
cases; the Bison grammar would have some issues with them too. However,
I don't feel too bad about this since other cases can be converted into
sub-SELECTs. For instance, "SET (a,b,c) = row_valued_function(x)" could
be written "SET (a,b,c) = (SELECT * FROM row_valued_function(x))".
Since most of the system thinks AND and OR are N-argument expressions
anyway, let's have the grammar generate a representation of that form when
dealing with input like "x AND y AND z AND ...", rather than generating
a deeply-nested binary tree that just has to be flattened later by the
planner. This avoids stack overflow in parse analysis when dealing with
queries having more than a few thousand such clauses; and in any case it
removes some rather unsightly inconsistencies, since some parts of parse
analysis were generating N-argument ANDs/ORs already.
It's still possible to get a stack overflow with weirdly parenthesized
input, such as "x AND (y AND (z AND ( ... )))", but such cases are not
mainstream usage. The maximum depth of parenthesization is already
limited by Bison's stack in such cases, anyway, so that the limit is
probably fairly platform-independent.
Patch originally by Gurjeet Singh, heavily revised by me
Any OS user able to access the socket can connect as the bootstrap
superuser and proceed to execute arbitrary code as the OS user running
the test. Protect against that by placing the socket in a temporary,
mode-0700 subdirectory of /tmp. The pg_regress-based test suites and
the pg_upgrade test suite were vulnerable; the $(prove_check)-based test
suites were already secure. Back-patch to 8.4 (all supported versions).
The hazard remains wherever the temporary cluster accepts TCP
connections, notably on Windows.
As a convenient side effect, this lets testing proceed smoothly in
builds that override DEFAULT_PGSOCKET_DIR. Popular non-default values
like /var/run/postgresql are often unwritable to the build user.
Security: CVE-2014-0067
187492b6c2 changed pgstat.c so that
the stats files were saved into $PGDATA/pg_stat directory when the server
was shutdowned. But it accidentally forgot to change the location of
pg_stat_statements permanent stats file. This commit fixes pg_stat_statements
so that its stats file is also saved into $PGDATA/pg_stat at shutdown.
Since this fix changes the file layout, we don't back-patch it to 9.3
where this oversight was introduced.
The original coding in contrib/uuid-ossp created and destroyed a uuid_t
object (or, in some cases, even two of them) each time it was called.
This is not the intended usage: you're supposed to keep the uuid_t object
around so that the library can cache its state across uses. (Other UUID
libraries seem to keep equivalent state behind-the-scenes in static
variables, but OSSP chose differently.) Aside from being quite inefficient,
creating a new uuid_t loses knowledge of the previously generated UUID,
which in theory could result in duplicate V1-style UUIDs being created
on sufficiently fast machines.
On at least some platforms, creating a new uuid_t also draws some entropy
from /dev/urandom, leaving less for the rest of the system. This seems
sufficiently unpleasant to justify back-patching this change.
The previous version of these tests expected uuid_generate_v1() to always
emit MAC addresses with the local-admin and multicast address bits zero.
However, several of the buildfarm critters are reporting values with the
local-admin bit set. (Perhaps they're running inside VMs or jails.)
And a couple are reporting values with the multicast bit set, probably
meaning that the UUID library couldn't read the system MAC address.
Also, it emerges that if OSSP UUID can't read the system MAC address, it
falls back to V1MC behavior wherein the whole node field gets randomized
each time, breaking the test that expected the node field to remain stable
in V1 output. (It looks like e2fs doesn't behave that way, though.)
It's not entirely clear why we can't get a system MAC address, since the
buildfarm scripts would not work without internet access. Nonetheless,
the regression tests had better cope with the case, so adjust the tests
to expect these behaviors.
This reverts commit 45b7abe59e.
It turns out that the %name-prefix syntax without "=" does not work
at all in pre-2.4 Bison. We are not prepared to make such a large
jump in minimum required Bison version just to suppress a warning
message in a version hardly any developers are using yet.
When 3.0 gets more popular, we'll figure out a way to deal with this.
In the meantime, BISONFLAGS=-Wno-deprecated is recommendable for
anyone using 3.0 who doesn't want to see the warning.
%name-prefix doesn't use an "=" sign according to the Bison docs, but it
silently accepted one anyway, until Bison 3.0. This was originally a
typo of mine in commit 012abebab1, and we
seem to have slavishly copied the error into all the other grammar files.
Per report from Vik Fearing; analysis by Peter Eisentraut.
Back-patch to all active branches, since somebody might try to build
a back branch with up-to-date tools.
On reflection, the timestamp-advances test might fail if we're unlucky
enough for the time_mid field to change between two calls, since uuid_cmp
is just bytewise comparison and the field ordering has more significant
fields later. Build some field extraction functions so we can do a more
honest test of that. Also check that the version and reserved fields
contain what they should.
The V5 (SHA1 hashing) code wrote 20 bytes into a 16-byte local variable.
This had accidentally failed to fail in my testing and Matteo's, but
buildfarm results exposed the problem.
Allow the contrib/uuid-ossp extension to be built atop any one of these
three popular UUID libraries. (The extension's name is now arguably a
misnomer, but we'll keep it the same so as not to cause unnecessary
compatibility issues for users.)
We would not normally consider a change like this post-beta1, but the issue
has been forced by our upgrade to autoconf 2.69, whose more rigorous header
checks are causing OSSP's header files to be rejected on some platforms.
It's been foreseen for some time that we'd have to move away from depending
on OSSP UUID due to lack of upstream maintenance, so this is a down payment
on that problem.
While at it, add some simple regression tests, in hopes of catching any
major incompatibilities between the three implementations.
Matteo Beccati, with some further hacking by me
Commit 090d0f2050 added new code showing
how it can be useful to set bgw_notify_pid to a non-zero value, but it
failed to make sure that the existing call to RegisterBackgroundWorker
initialized the new field at all.
Report and patch by Shigeru Hanada.
On Mingw, it seems that scanf() doesn't necessarily accept the same format
codes that printf() does, and in particular it may fail to recognize %llu
even though printf() does. Since configure only probes printf() behavior
while setting up the INT64_FORMAT macros, this means it's unsafe to use
those macros with scanf(). We had only one instance of such a coding
pattern, in contrib/pg_stat_statements, so change that code to avoid
the problem.
Per buildfarm warnings. Back-patch to 9.0 where the troublesome code
was introduced.
Michael Paquier
Change the total-transactions counters from int32 to int64 to accommodate
cases where we do more than 2^31 transactions during a run. This patch
does not change the INT_MAX limit on explicit "-t" parameters, but it
does allow the product of the -t and -c parameters to exceed INT_MAX, or
allow a -T limit that is large enough that more than 2^31 transactions
can be completed. While pgbench did not actually fail in such cases,
it did print an incorrect total-transactions count, and some of the
derived numbers such as TPS would have been wrong as well.
Tomas Vondra
C89 says that compound initializers may only contain constant expressions;
a restriction violated by commit 89d00cbe. While we've had no actual field
complaints about this, C89 is still the project standard, and it's not
saving all that much code to break compatibility here. So let's adhere to
the old restriction.
In passing, replace a bunch of hardwired constants "256" with
sizeof(target-variable), just because the latter is more readable and
less breakable. And const-ify where possible.
Back-patch to 9.3 where the nonportable code was added.
Andres Freund and Tom Lane
gbt_macad_union also allocated 12-byte structs where we really need 16.
Per report from Andres Freund. No back-patch since there's no current
risk of a real problem.
The macaddr opclass stores two macaddr structs (each of size 6) in an
index column that's declared as being of type gbtreekey16, ie 16 bytes.
In the original coding this led to passing a palloc'd value of size 12
to the index insertion code, so that data would be fetched past the
end of the allocated value during index tuple construction. This makes
valgrind unhappy. In principle it could result in a SIGSEGV, though
with the current implementation of palloc there's no risk since
the 12-byte request size would be rounded up to 16 bytes anyway.
To fix, add a field to struct gbtree_ninfo showing the declared size of
the index datums, and use that in the palloc requests; and use palloc0
to be sure that any wasted bytes are cleanly initialized.
Per report from Andres Freund. No back-patch since there's no current
risk of a real problem.
pg_stat_replication shows connected replication clients. The ddl test case
never has any replication clients connected, so querying pg_stat_replication
is pointless. To check that a slot has been dropped correctly, query
pg_replication_slots instead.
Andres Freund
The code expands a varbit gist leaf key to a node key by copying the bit
data twice in a varlen datum, as both the lower and upper key. The lower key
was expanded to INTALIGN size, but the padding bytes were not initialized.
That's a problem because when the lower/upper keys are compared, the padding
bytes are used compared too, when the values are otherwise equal. That could
lead to incorrect query results.
REINDEX is advised for any btree_gist indexes on bit or bit varying data
type, to fix any garbage padding bytes on disk.
Per Valgrind, reported by Andres Freund. Backpatch to all supported
versions.
It's easy to forget using SYSTEMQUOTEs when constructing command strings
for system() or popen(). Even if we fix all the places missing it now, it is
bound to be forgotten again in the future. Introduce wrapper functions that
do the the extra quoting for you, and get rid of SYSTEMQUOTEs in all the
callers.
We previosly used SYSTEMQUOTEs in all the hard-coded command strings, and
this doesn't change the behavior of those. But user-supplied commands, like
archive_command, restore_command, COPY TO/FROM PROGRAM calls, as well as
pgbench's \shell, will now gain an extra pair of quotes. That is desirable,
but if you have existing scripts or config files that include an extra
pair of quotes, those might need to be adjusted.
Reviewed by Amit Kapila and Tom Lane
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
Some popen() calls were missing SYSTEMQUOTEs, which caused initdb and
pg_upgrade to fail on Windows, if the installation path contained both
spaces and @ signs.
Patch by Nikhil Deshpande. Backpatch to all supported versions.
pgss_post_parse_analyze() neglected to pass the call on to any earlier
occupant of the post_parse_analyze_hook. There are no other users of that
hook in contrib/, and most likely none in the wild either, so this is
probably just a latent bug. But it's a bug nonetheless, so back-patch
to 9.2 where this code was introduced.
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
Specifically, on-stack memset() might be removed, so:
* Replace memset() with px_memset()
* Add px_memset to copy_crlf()
* Add px_memset to pgp-s2k.c
Patch by Marko Kreen
Report by PVS-Studio
Backpatch through 8.4.
Non-existent tablespace directory references can occur if user
tablespaces are created inside data directories and the data directory
is renamed in preparation for running pg_upgrade, and the symbolic links
are not updated.
Backpatch to 9.3.
We were emitting "(SELECT null::typename)", which is usually interpreted
as a scalar subselect, but not so much in the context "x = ANY(...)".
This led to remote-side parsing failures when remote_estimate is enabled.
A quick and ugly fix is to stick in an extra cast step,
"((SELECT null::typename)::typename)". The cast will be thrown away as
redundant by parse analysis, but not before it's done its job of making
sure the grammar sees the ANY argument as an a_expr rather than a
select_with_parens. Per an example from Hannu Krosing.
Add vacuumdb option --analyze-in-stages which runs ANALYZE three times
with different configuration settings, adopting the logic from the
analyze_new_cluster.sh script that pg_upgrade generates. That way,
users of pg_dump/pg_restore can also use that functionality.
Change pg_upgrade to create the script so that it calls vacuumdb instead
of implementing the logic itself.
When extracting trigrams from a regular expression for search of a GIN or
GIST trigram index, it's useful to penalize (preferentially discard)
trigrams that contain whitespace, since those are typically far more common
in the index than trigrams not containing whitespace. Of course, this
should only be a preference not a hard rule, since we might otherwise end
up with no trigrams to search for. The previous coding tended to produce
fairly inefficient trigram search sets for anchored regexp patterns, as
reported by Erik Rijkers. This patch penalizes whitespace-containing
trigrams, and also reduces the target number of extracted trigrams, since
experience suggests that the original coding tended to select too many
trigrams to search for.
Alexander Korotkov, reviewed by Tom Lane
For variadic functions (other than VARIADIC ANY), the syntaxes foo(x,y,...)
and foo(VARIADIC ARRAY[x,y,...]) should be considered equivalent, since the
former is converted to the latter at parse time. They have indeed been
equivalent, in all releases before 9.3. However, commit 75b39e790 made an
ill-considered decision to record which syntax had been used in FuncExpr
nodes, and then to make equal() test that in checking node equality ---
which caused the syntaxes to not be seen as equivalent by the planner.
This is the underlying cause of bug #9817 from Dmitry Ryabov.
It might seem that a quick fix would be to make equal() disregard
FuncExpr.funcvariadic, but the same commit made that untenable, because
the field actually *is* semantically significant for some VARIADIC ANY
functions. This patch instead adopts the approach of redefining
funcvariadic (and aggvariadic, in HEAD) as meaning that the last argument
is a variadic array, whether it got that way by parser intervention or was
supplied explicitly by the user. Therefore the value will always be true
for non-ANY variadic functions, restoring the principle of equivalence.
(However, the planner will continue to consider use of VARIADIC as a
meaningful difference for VARIADIC ANY functions, even though some such
functions might disregard it.)
In HEAD, this change lets us simplify the decompilation logic in
ruleutils.c, since the funcvariadic/aggvariadic flag tells directly whether
to print VARIADIC. However, in 9.3 we have to continue to cope with
existing stored rules/views that might contain the previous definition.
Fortunately, this just means no change in ruleutils.c, since its existing
behavior effectively ignores funcvariadic for all cases other than VARIADIC
ANY functions.
In HEAD, bump catversion to reflect the fact that FuncExpr.funcvariadic
changed meanings; this is sort of pro forma, since I don't believe any
built-in views are affected.
Unfortunately, this patch doesn't magically fix everything for affected
9.3 users. After installing 9.3.5, they might need to recreate their
rules/views/indexes containing variadic function calls in order to get
everything consistent with the new definition. As in the cited bug,
the symptom of a problem would be failure to use a nominally matching
index that has a variadic function call in its definition. We'll need
to mention this in the 9.3.5 release notes.
contrib/test_decoding's "make check" runs two sets of tests. Unless we
specify separate output directories for each set the isolation tests
will overwrite the output from the normal regression set. Doing this
will help the buildfarm collect complete logs.
Any OS user able to access the socket can connect as the bootstrap
superuser and in turn execute arbitrary code as the OS user running the
test. Protect against that by placing the socket in the temporary data
directory, which has mode 0700 thanks to initdb. Back-patch to 8.4 (all
supported versions). The hazard remains wherever the temporary cluster
accepts TCP connections, notably on Windows.
Attempts to run "make check" from a directory with a long name will now
fail. An alternative not sharing that problem was to place the socket
in a subdirectory of /tmp, but that is only secure if /tmp is sticky.
The PG_REGRESS_SOCK_DIR environment variable is available as a
workaround when testing from long directory paths.
As a convenient side effect, this lets testing proceed smoothly in
builds that override DEFAULT_PGSOCKET_DIR. Popular non-default values
like /var/run/postgresql are often unwritable to the build user.
Security: CVE-2014-0067