As with initdb these programs need to run with a restricted token, and
if they don't pg_upgrade will fail when run as a user with Adminstrator
privileges.
Backpatch to all live branches. On the development branch the code is
reorganized so that the restricted token code is now in a single
location. On the stable bramches a less invasive change is made by
simply copying the relevant code to pg_upgrade.c and pg_resetxlog.c.
Patches and bug report from Muhammad Asif Naeem, reviewed by Michael
Paquier, slightly edited by me.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
Previously, TOAST tables only required in the new cluster could cause
oid conflicts if they were auto-numbered and a later conflicting oid had
to be assigned.
Backpatch through 9.3
Historically these database properties could be manipulated only by
manually updating pg_database, which is error-prone and only possible for
superusers. But there seems no good reason not to allow database owners to
set them for their databases, so invent CREATE/ALTER DATABASE options to do
that. Adjust a couple of places that were doing it the hard way to use the
commands instead.
Vik Fearing, reviewed by Pavel Stehule
There were some C comments that hadn't been updated from the switch of
using only pg_dumpall to using pg_dump and pg_dumpall, so update them.
Also, don't bother using --schema-only for pg_dumpall --globals-only.
Backpatch through 9.4
This fixes a bug that caused vacuum to fail when the '0000' files left
by initdb were accessed as part of vacuum's cleanup of old pg_multixact
files.
Backpatch through 9.3
Make slightly better decisions about indentation than what pgindent
is capable of. Mostly breaking out long function calls into one
line per argument, with a few other minor adjustments.
No functional changes- all whitespace.
pgindent ran cleanly (didn't change anything) after.
Passes all regressions.
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
libpgcommon is a new static library to allow sharing code among the
various frontend programs and backend; this lets us eliminate duplicate
implementations of common routines. We avoid libpgport, because that's
intended as a place for porting issues; per discussion, it seems better
to keep them separate.
The first use case, and the only implemented by this patch, is pg_malloc
and friends, which many frontend programs were already using.
At the same time, we can use this to provide palloc emulation functions
for the frontend; this way, some palloc-using files in the backend can
also be used by the frontend cleanly. To do this, we change palloc() in
the backend to be a function instead of a macro on top of
MemoryContextAlloc(). This was previously believed to cause loss of
performance, but this implementation has been tweaked by Tom and Andres
so that on modern compilers it provides a slight improvement over the
previous one.
This lets us clean up some places that were already with
localized hacks.
Most of the pg_malloc/palloc changes in this patch were authored by
Andres Freund. Zoltán Böszörményi also independently provided a form of
that. libpgcommon infrastructure was authored by Álvaro.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
With AtEOXact applied, --single-transaction makes pg_restore slower, and
has the potential to require lock table configuration, so remove the
argument.
Per suggestion from Tom.
Pg_upgrade displays file names during copy and database names during
dump/restore. Andrew Dunstan identified three bugs:
* long file names were being truncated to 60 _leading_ characters, which
often do not change for long file names
* file names were truncated to 60 characters in log files
* carriage returns were being output to log files
This commit fixes these --- it prints 60 _trailing_ characters to the
status display, and full path names without carriage returns to log
files. It also suppresses status output to the log file unless verbose
mode is used.
storage.
Have pg_upgrade use it, and enable server options fsync=off and
full_page_writes=off.
Document that users turning fsync from off to on should run initdb
--sync-only.
[ Previous commit was incorrectly applied as a git merge. ]
--single-transaction to restore each database schema. This yields
performance improvements for databases with many tables. Also, remove
split_old_dump() as it is no longer needed.
socket location. Also, prevent putting the socket in the current
directory for pre-9.1 servers in live check and non-live check mode,
because pre-9.1 pg_ctl -w can't handle it.
Backpatch to 9.2.
When starting either an old or new postmaster, force it to place its Unix
socket in the current directory. This makes it even harder for accidental
connections to occur during pg_upgrade, and also works around some
scenarios where the default socket location isn't usable. (For example,
if the default location is something other than "/tmp", it might not exist
during "make check".)
When checking an already-running old postmaster, find out its actual socket
directory location from postmaster.pid, if possible. This dodges problems
with an old postmaster having a configured location different from the
default built into pg_upgrade's libpq. We can't find that out if the old
postmaster is pre-9.1, so also document how to cope with such scenarios
manually.
In support of this, centralize handling of the connection-related command
line options passed to pg_upgrade's subsidiary programs, such as pg_dump.
This should make future changes easier.
Bruce Momjian and Tom Lane
The previous signature made it very easy to pass something other than
the printf-format specifier in the corresponding position, without any
warning from the compiler.
While at it, move some of the escaping, redirecting and quoting
responsibilities from the callers into exec_prog() itself. This makes
the callsites cleaner.
4741e9afb9. This was done by adding an
optional second log file parameter to exec_prog(), and closing and
reopening the log file between system() calls.
Backpatch to 9.2.
Currently only pg_clog is copied, but some other directories could need
the same treatment as well, so create a subroutine to do it.
Extracted from my (somewhat larger) FOR KEY SHARE patch.
The xlogid + segno representation of a particular WAL segment doesn't make
much sense in pg_resetxlog anymore, now that we don't use that anywhere
else. Use the WAL filename instead, since that's a convenient way to name a
particular WAL segment.
I did this partially for pg_resetxlog in the original xlogid/segno -> uint64
patch, but I neglected pg_upgrade and the docs. This should now be more
complete.
add ability to control permissions of created files
have psql echo its queries for easier debugging
output four separate log files, and delete them on success
add -r/--retain option to keep log files after success
make logs file append-only
remove -g/-G/-l logging options
sugggest tailing appropriate log file on failure
enhance -v/--verbose behavior
Andrew Dunstan
Bruce Momjian
Alvaro Herrera
Tom Lane
Peter Eisentraut
Stephen Frost
Kevin Grittner
Heikki Linnakangas
Robert Haas