transformCreateStmt() adjusts the transformed statement's RangeVar
to specify the target schema explicitly, for the express reason
of making sure that auxiliary statements derived by parse
transformation operate on the right table. But the refactoring
I did in commit 502898192 got this wrong and passed the untransformed
RangeVar to expandTableLikeClause(). This could lead to assertion
failures or weird misbehavior if the wrong table was accessed.
Per report from Alexander Lakhin. Like the previous patch, back-patch
to all supported branches.
Discussion: https://postgr.es/m/05051f9d-b32b-cb35-6735-0e9f2ab86b5f@gmail.com
We use the timestamp of the global statfile if we are not able to
determine it for a particular database in case the entry for that database
doesn't exist. However, we were using it even when the statfile is
corrupt.
As there is no user reported issue and it is not clear if there is any
impact of this on actual application so decided not to backpatch.
Reported-by: Amit Kapila
Author: Amit Kapila
Reviewed-by: Sawada Masahiko, Magnus Hagander and Alvaro Herrera
Discussion: https://postgr.es/m/CAA4eK1J3oTJKyVq6v7K4d3jD+vtnruG9fHRib6UuWWsrwAR6Aw@mail.gmail.com
The bgwriter, checkpointer, walwriter, and walreceiver processes
claimed to allow SIGQUIT "at all times". In reality SIGQUIT
would get re-blocked during error recovery, because we didn't
update the actual signal mask immediately, so sigsetjmp() would
save and reinstate a mask that includes SIGQUIT.
This appears to be simply a coding oversight. There's never a
good reason to hold off SIGQUIT in these processes, because it's
going to just call _exit(2) which should be safe enough, especially
since the postmaster is going to tear down shared memory afterwards.
Hence, stick in PG_SETMASK() calls to install the modified BlockSig
mask immediately.
Also try to improve the comments around sigsetjmp blocks. Most of
them were just referencing postgres.c, which is misleading because
actually postgres.c manages the signals differently.
No back-patch, since there's no evidence that this is causing any
problems in the field.
Discussion: https://postgr.es/m/CALDaNm1d1hHPZUg3xU4XjtWBOLCrA+-2cJcLpw-cePZ=GgDVfA@mail.gmail.com
Currently, no useful trace is left in the logs when the postmaster
is forced to use SIGKILL to shut down children that failed to respond
to SIGQUIT. Some questions were raised about how often that scenario
happens in the buildfarm, so let's add a LOG-level message showing
that it happened.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Although 58c6feccf fixed the case for SIGQUIT, we were still calling
proc_exit() from signal handlers for SIGTERM and timeout failures in
ProcessStartupPacket. Fortunately, at the point where that code runs,
we haven't yet connected to shared memory in any meaningful way, so
there is nothing we need to undo in shared memory. This means it
should be safe to use _exit(1) here, ie, not run any atexit handlers
but also inform the postmaster that it's not a crash exit.
To make sure nobody breaks the "nothing to undo" expectation, add
a cross-check that no on-shmem-exit or before-shmem-exit handlers
have been registered yet when we finish using these signal handlers.
This change is simple enough that maybe it could be back-patched,
but I won't risk that right now.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Bring the signal handling for startup-packet collection into line
with the policy established in commits bedadc732 and 8e19a8264,
namely don't risk running atexit callbacks when handling SIGQUIT.
Ideally, we'd not do so for SIGTERM or timeout interrupts either,
but that change seems a bit too risky for the back branches.
For now, just improve the comments in this area to describe the risk.
Also relocate where BackendInitialize re-disables these interrupts,
to minimize the code span where they're active. This doesn't buy
a whole lot of safety, but it can't hurt.
In passing, rename startup_die() to remove confusion about whether
it is for the startup process.
Like the previous commits, back-patch to all supported branches.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Move applicable code out of RelationBuildDesc(), which nailed relations
bypass. Non-assert builds experienced no known problems. Back-patch to
v13, where commit c6b92041d3 introduced
rd_firstRelfilenodeSubid.
Kyotaro Horiguchi. Reported by Justin Pryzby.
Discussion: https://postgr.es/m/20200907023737.GA7158@telsasoft.com
Commit 8e19a8264 changed the SIGQUIT handlers of almost all server
processes not to run atexit callbacks. The archiver process was
skipped, perhaps because it's not connected to shared memory; but
it's just as true here that running atexit callbacks in a signal
handler is unsafe. So let's make it work like the rest.
In HEAD and v13, we can use the common SignalHandlerForCrashExit
handler. Before that, just tweak pgarch_exit to use _exit(2)
explicitly.
Like the previous commit, back-patch to all supported branches.
Kyotaro Horiguchi, back-patching by me
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Partitioning tuple route code assumes that the partition chosen while
descending the partition hierarchy is always the correct one. This is
true except when the partition is the default partition and another
partition has been added concurrently: the partition constraint changes
and we don't recheck it. This can lead to tuples mistakenly being added
to the default partition that should have been rejected.
Fix by rechecking the default partition constraint while descending the
hierarchy.
An isolation test based on the reproduction steps described by Hao Wu
(with tweaks for extra coverage) is included.
Backpatch to 12, where this bug came in with 898e5e3290.
Reported by: Hao Wu <hawu@vmware.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqFqBmcSSap4sFnCBUEL_VfOMmEKaQ3gwUhyfa4c7J_-nA@mail.gmail.com
Discussion: https://postgr.es/m/DM5PR0501MB3910E97A9EDFB4C775CF3D75A42F0@DM5PR0501MB3910.namprd05.prod.outlook.com
Historically, cancel_before_shmem_exit() just silently did nothing
if the specified callback wasn't the top-of-stack. The folly of
ignoring this case was exposed by the bugs fixed in 303640199 and
bab150045, so let's make it throw elog(ERROR) instead.
There is a decent argument to be made that PG_ENSURE_ERROR_CLEANUP
should use some separate infrastructure, so it wouldn't break if
something inside the guarded code decides to register a new
before_shmem_exit callback. However, a survey of the surviving
uses of before_shmem_exit() and PG_ENSURE_ERROR_CLEANUP doesn't
show any plausible conflicts of that sort today, so for now we'll
forgo the extra complexity. (It will almost certainly become
necessary if anyone ever wants to wrap PG_ENSURE_ERROR_CLEANUP
around arbitrary user-defined actions, though.)
No backpatch, since this is developer support not a production issue.
Bharath Rupireddy, per advice from Andres Freund, Robert Haas, and myself
Discussion: https://postgr.es/m/CALj2ACWk7j4F2v2fxxYfrroOF=AdFNPr1WsV+AGtHAFQOqm_pw@mail.gmail.com
The problem is caused by me (Andres) having ProcSleep() look at the
wrong PGPROC entry in 5788e258bb.
Unfortunately it seems hard to write a reliable test for autovacuum
cancellations. Perhaps somebody will come up with a good approach, but
it seems worth fixing the issue even without a test.
Reported-By: Jeff Janes <jeff.janes@gmail.com>
Author: Jeff Janes <jeff.janes@gmail.com>
Discussion: https://postgr.es/m/CAMkU=1wH2aUy+wDRDz+5RZALdcUnEofV1t9PzXS_gBJO9vZZ0Q@mail.gmail.com
This essentially reverts a micro-optimization I made years ago,
as part of the much larger commit d72f6c750. It's doubtful
that there was any hard evidence for it being helpful even then,
and the case is even more dubious now that modern compilers
are so much smarter about inlining memset().
The proximate reason for undoing it is to get rid of the type punning
inherent in MemSet, for fear that that may cause problems now that
we're applying additional optimization switches to numeric.c.
At the very least this'll silence some warnings from a few old
buildfarm animals.
(It's probably past time for another look at whether MemSet is still
worth anything at all, but I do not propose to tackle that question
right now.)
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Until now, REINDEX was not able to work with partitioned tables and
indexes, forcing users to reindex partitions one by one. This extends
REINDEX INDEX and REINDEX TABLE so as they can accept a partitioned
index and table in input, respectively, to reindex all the partitions
assigned to them with physical storage (foreign tables, partitioned
tables and indexes are then discarded).
This shares some logic with schema and database REINDEX as each
partition gets processed in its own transaction after building a list of
relations to work on. This choice has the advantage to minimize the
number of invalid indexes to one partition with REINDEX CONCURRENTLY in
the event a cancellation or failure in-flight, as the only indexes
handled at once in a single REINDEX CONCURRENTLY loop are the ones from
the partition being working on.
Isolation tests are added to emulate some cases I bumped into while
developing this feature, particularly with the concurrent drop of a
leaf partition reindexed. However, this is rather limited as LOCK would
cause REINDEX to block in the first transaction building the list of
partitions.
Per its multi-transaction nature, this new flavor cannot run in a
transaction block, similarly to REINDEX SCHEMA, SYSTEM and DATABASE.
Author: Justin Pryzby, Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/db12e897-73ff-467e-94cb-4af03705435f.adger.lj@alibaba-inc.com
Tomas Vondra observed that the IO behavior for HashAgg tends to be
worse than for Sort. Penalize HashAgg IO costs accordingly.
Also, account for the CPU effort of spilling the tuples and reading
them back.
Discussion: https://postgr.es/m/20200906212112.nzoy5ytrzjjodpfh@development
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Experimentation shows that clang will auto-vectorize the critical
multiplication loop if the termination condition is written "i2 < limit"
rather than "i2 <= limit". This seems unbelievably stupid, but I've
reproduced it on both clang 9.0.1 (RHEL8) and 11.0.3 (macOS Catalina).
gcc doesn't care, so tweak the code to do it that way.
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Some kernels can tell us the type of a "dirent", so we can avoid a call
to stat() or lstat() in many cases. Define a new function
get_dirent_type() to contain that logic, for use by the backend and
frontend versions of walkdir(), and perhaps other callers in future.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BFzxupGGN4GpUdbzZN%2Btn6FQPHo8w0Q%2BAPH5Wz8RG%2Bww%40mail.gmail.com
Compile numeric.c with -ftree-vectorize where available, and adjust
the innermost loop of mul_var() so that it is amenable to being
auto-vectorized. (Mainly, that involves making it process the arrays
left-to-right not right-to-left.)
Applying -ftree-vectorize actually makes numeric.o smaller, at least
with my compiler (gcc 8.3.1 on x86_64), and it's a little faster too.
Independently of that, fixing the inner loop to be vectorizable also
makes things a bit faster. But doing both is a huge win for
multiplications with lots of digits. For me, the numeric regression
test is the same speed to within measurement noise, but numeric_big
is a full 45% faster.
We also looked into applying -funroll-loops, but that makes numeric.o
bloat quite a bit, and the additional speed improvement is very
marginal.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Replace CFLAGS_VECTOR with CFLAGS_UNROLL_LOOPS and CFLAGS_VECTORIZE,
allowing us to distinguish whether we want to apply -funroll-loops,
-ftree-vectorize, or both to a particular source file. Up to now
the only consumer of the symbol has been checksum.c which wants
both, so that there was no need to distinguish; but that's about
to change.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Letting the caller provide a StringInfo to read into is helpful when
the caller needs to merge lines or otherwise modify the data after
it's been read. Notably, now the code added by commit 8f8154a50
can use pg_get_line_append() instead of having its own copy of that
logic. A follow-on commit will also make use of this.
Also, since StringInfo buffers are a minimum of 1KB long, blindly
using pg_get_line() in a loop can eat a lot more memory than one would
expect. I discovered for instance that commit e0f05cd5b caused initdb
to consume circa 10MB to read postgres.bki, even though that's under
1MB worth of data. A less memory-hungry alternative is to re-use the
same StringInfo for all lines and pg_strdup the results.
Discussion: https://postgr.es/m/1315832.1599345736@sss.pgh.pa.us
We reported the wrong types when complaining that an aggregate's
moving-aggregate implementation is inconsistent with its regular
implementation.
This was wrong since the feature was introduced, so back-patch
to all supported branches.
Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1x808LH=LPhZp9mNSP0Xd1xDqEd+XeGcvEe48dfE6xV=A@mail.gmail.com
At some point back in the last century, somebody felt that reading
all of pg_type twice was cheaper, or at least easier, than using
repalloc() to resize the Typ[] array dynamically. That seems like an
entirely wacko proposition, so rewrite the code to do it the other
way. (To add insult to injury, there were two not-quite-identical
copies of said code.)
initdb.c's readfile() function had the same disease of preferring
to do double the I/O to avoid resizing its output array. Here,
we can make things easier by using the just-invented pg_get_line()
function to handle reading individual lines without a predetermined
notion of how long they are.
On my machine, it's difficult to detect any net change in the
overall runtime of initdb from these changes; but they should
help on slower buildfarm machines (especially since a buildfarm
cycle involves a lot of initdb's these days).
My attention was drawn to these places by scan-build complaints,
but on inspection they needed a lot more work than just suppressing
dead stores :-(
This commit improves the dependency registrations by taking advantage of
the preliminary work done in 63110c62, to group together the insertion
of dependencies of the same type to pg_depend. With the current layer
of routines available, and as only dependencies of the same type can be
grouped, there are code paths still doing more than one multi-insert
when it is necessary to register dependencies of multiple types
(constraint and index creation are two cases doing that).
While on it, this refactors some of the code to use ObjectAddressSet()
when manipulating object addresses.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera
Discussion: https://postgr.es/m/20200807061619.GA23955@paquier.xyz
This is a follow-up of the work done in e3931d01. This case is a bit
different than pg_attribute and pg_shdepend: the maximum number of items
to insert is known in advance, but there is no need to handle pinned
dependencies. Hence, the base allocation for slots is done based on the
number of items and the maximum allowed with a cap at 64kB. Slots are
initialized once used to minimize the overhead of the operation.
The insertions can be done for dependencies of the same type. More
could be done by grouping the insertion of multiple dependency types in
a single batch. This is left as future work.
Some of the multi-insert logic is also simplified for pg_shdepend, as
per the feedback discussed for this specific patch. This also moves to
indexing.h the variable capping the maximum amount of data that can be
used at once for a multi-insert, instead of having separate definitions
for pg_attribute, pg_depend and pg_shdepend.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera
Discussion: https://postgr.es/m/20200807061619.GA23955@paquier.xyz
Commit 3f60f690f only partially fixed the broken-status-tracking
issue in LogicalRepApplyLoop: we need ping_sent to have the same
lifetime as last_recv_timestamp. The effects are much less serious
than what that commit fixed, though. AFAICS this would just lead to
extra ping requests being sent, once per second until the sender
responds. Still, it's a bug, so backpatch to v10 as before.
Discussion: https://postgr.es/m/959627.1599248476@sss.pgh.pa.us
When reading a WAL record fails to find continuation record(s) of the
proper length, report what it expects, for clarity.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200903212152.GA15319@alvherre.pgsql
This node already handles multiple options using a bitmask, so having a
separate boolean flag is not necessary. This simplifies the code a bit
with less arguments to give to the reindex routines, by replacing the
boolean with an equivalent bitmask value.
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/20200902110326.GA14963@paquier.xyz
This patch started out with the goal of harmonizing various arbitrary
limits on password length, but after awhile a better idea emerged:
let's just get rid of those fixed limits.
recv_password_packet() has an arbitrary limit on the packet size,
which we don't really need, so just drop it. (Note that this doesn't
really affect anything for MD5 or SCRAM password verification, since
those will hash the user's password to something shorter anyway.
It does matter for auth methods that require a cleartext password.)
Likewise remove the arbitrary error condition in pg_saslprep().
The remaining limits are mostly in client-side code that prompts
for passwords. To improve those, refactor simple_prompt() so that
it allocates its own result buffer that can be made as big as
necessary. Actually, it proves best to make a separate routine
pg_get_line() that has essentially the semantics of fgets(), except
that it allocates a suitable result buffer and hence will never
return a truncated line. (pg_get_line has a lot of potential
applications to replace randomly-sized fgets buffers elsewhere,
but I'll leave that for another patch.)
I built pg_get_line() atop stringinfo.c, which requires moving
that code to src/common/; but that seems fine since it was a poor
fit for src/port/ anyway.
This patch is mostly mine, but it owes a good deal to Nathan Bossart
who pressed for a solution to the password length problem and
created a predecessor patch. Also thanks to Peter Eisentraut and
Stephen Frost for ideas and discussion.
Discussion: https://postgr.es/m/09512C4F-8CB9-4021-B455-EF4C4F0D55A0@amazon.com
Because sigsetjmp() will restore the initial state with signals blocked,
the code path in bgworker.c for reporting an error and exiting would
execute that way. Usually this is fairly harmless; but if a parallel
worker had an error message exceeding the shared-memory communication
buffer size (16K) it would lock up, because it would wait for a
resume-sending signal from its parallel leader which it would never
detect.
To fix, just unblock signals at the appropriate point.
This can be shown to fail back to 9.6. The lack of parallel query
infrastructure makes it difficult to provide a simple test case for
9.5; but I'm pretty sure the issue exists in some form there as well,
so apply the code change there too.
Vignesh C, reviewed by Bharath Rupireddy, Robert Haas, and myself
Discussion: https://postgr.es/m/CALDaNm1d1hHPZUg3xU4XjtWBOLCrA+-2cJcLpw-cePZ=GgDVfA@mail.gmail.com
A backslash at the end of a line now causes the next line to be appended
to the current one (effectively, the backslash and newline are discarded).
This allows long HBA entries to be created without legibility problems.
While we're here, get rid of the former hard-wired length limit on
pg_hba.conf lines, by using an expansible StringInfo buffer instead
of a fixed-size local variable.
Since the same code is used to read the ident map file, these changes
apply there as well.
Fabien Coelho, reviewed by Justin Pryzby and David Zhang
Discussion: https://postgr.es/m/alpine.DEB.2.21.2003251906140.15243@pseudo
To add support for streaming of in-progress transactions into the
built-in logical replication, we need to do three things:
* Extend the logical replication protocol, so identify in-progress
transactions, and allow adding additional bits of information (e.g.
XID of subtransactions).
* Modify the output plugin (pgoutput) to implement the new stream
API callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle streamed
in-progress transaction by spilling the data to disk and then
replaying them on commit.
We however must explicitly disable streaming replication during
replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover we don't have a replication connection open so we
don't have where to send the data anyway.
Author: Tomas Vondra, Dilip Kumar and Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This splits a string at occurrences of a delimiter. It is exactly like
string_to_array() except for producing a set of values instead of an
array of values. Thus, the relationship of these two functions is
the same as between regexp_split_to_table() and regexp_split_to_array().
Although the same results could be had from unnest(string_to_array()),
this is somewhat faster than that, and anyway it seems reasonable to
have it for symmetry with the regexp functions.
Pavel Stehule, reviewed by Peter Smith
Discussion: https://postgr.es/m/CAFj8pRD8HOpjq2TqeTBhSo_QkzjLOhXzGCpKJ4nCs7Y9SQkuPw@mail.gmail.com
In SyncRepWaitForLSN() routine called in transaction commit time,
SyncRepLock is necessary to atomically both check the shared
sync_standbys_defined flag and operate the sync replication wait-queue.
On the other hand, when the flag is false, the lock is not necessary
because the wait-queue is not touched. But due to the changes by
commit 48c9f49265, previously the lock was taken whatever the flag was.
This could cause unnecessary performance overhead in every transaction
commit time. Therefore this commit avoids that unnecessary aquisition
of SyncRepLock.
Author: Fujii Masao
Reviewed-by: Asim Praveen, Masahiko Sawada,
Discussion: https://postgr.es/m/20200406050332.nsscfqjzk2d57zyx@alap3.anarazel.de
When multiple relations are reindexed, a scan of pg_class is done first
to build the list of relations to work on. However the REINDEX logic
has never checked if a relation listed still exists when beginning the
work on it, causing for example sudden cache lookup failures.
This commit adds safeguards against dropped relations for REINDEX,
similarly to VACUUM or CLUSTER where we try to open the relation,
ignoring it if it is missing. A new option is added to the REINDEX
routines to control if a missed relation is OK to ignore or not.
An isolation test, based on REINDEX SCHEMA, is added for the concurrent
and non-concurrent cases.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/20200813043805.GE11663@paquier.xyz
Since other sessions aren't allowed to look into a temporary table
of our own session, we do not need to worry about the global xmin
horizon when setting the vacuum XID cutoff. Indeed, if we're not
inside a transaction block, we may set oldestXmin to be the next
XID, because there cannot be any in-doubt tuples in a temp table,
nor any tuples that are dead but still visible to some snapshot of
our transaction. (VACUUM, of course, is never inside a transaction
block; but we need to test that because CLUSTER shares the same code.)
This approach allows us to always clean out a temp table completely
during VACUUM, independently of concurrent activity. Aside from
being useful in its own right, that simplifies building reproducible
test cases.
Discussion: https://postgr.es/m/3490536.1598629609@sss.pgh.pa.us
We were already raising an error for DROP INDEX CONCURRENTLY on a
partitioned table, albeit a different and confusing one:
ERROR: DROP INDEX CONCURRENTLY must be first action in transaction
Change that to throw a more comprehensible error:
ERROR: cannot drop partitioned index \"%s\" concurrently
Michael Paquier authored the test case for indexes on temporary
partitioned tables.
Backpatch to 11, where indexes on partitioned tables were added.
Reported-by: Jan Mussler <jan.mussler@zalando.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16594-d2956ca909585067@postgresql.org
Commit 808e13b282 introduced a few APIs to extend the existing Buffile
interface. In SharedFileSetDeleteOnProcExit, it tries to delete the list
element while traversing the list with 'foreach' construct which makes the
behavior of list traversal unpredictable.
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Tested-by: Dilip Kumar and Neha Sharma
Discussion: https://postgr.es/m/CAA4eK1JhLatVcQ2OvwA_3s0ih6Hx9+kZbq107cXVsSWWukH7vA@mail.gmail.com
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
A failure when dropping concurrently an index used in a replica identity
could leave in pg_index an index marked as !indisvalid and
indisreplident. Reindexing this index would switch back indisvalid to
true, and if the replica identity of the parent relation was switched to
use a different index, it would be possible to finish with more than one
index marked as indisreplident. If that were to happen, this could mess
up with the relation cache as an incorrect index could be used for the
replica identity.
Indexes marked as invalid are discarded as candidates for the replica
identity, as of RelationGetIndexList(), so similarly to what is done
with indisclustered, resetting indisreplident when the index is marked
as invalid keeps things consistent. REINDEX CONCURRENTLY's swapping
already resets the flag for the old index, while the new index inherits
the value of the old index to-be-dropped, so only DROP INDEX was an
issue.
Even if this is a bug, the sequence able to reproduce a problem requires
a failure while running DROP INDEX CONCURRENTLY, something unlikely
going to happen in the field, so no backpatch is done.
Author: Michael Paquier
Reviewed-by: Dmitry Dolgov
Discussion: https://postgr.es/m/20200827025721.GN2017@paquier.xyz
collectMatchBitmap() needs to re-find the index tuple it was previously
looking at, after transiently dropping lock on the index page it's on.
The tuple should still exist and be at its prior position or somewhere
to the right of that, since ginvacuum never removes tuples but
concurrent insertions could add one. However, there was a thinko in
that logic, to the effect of expecting any inserted tuples to have the
same index "attnum" as what we'd been scanning. Since there's no
physical separation of tuples with different attnums, it's not terribly
hard to devise scenarios where this fails, leading to transient "lost
saved point in index" errors. (While I've duplicated this with manual
testing, it seems impossible to make a reproducible test case with our
available testing technology.)
Fix by just continuing the scan when the attnum doesn't match.
While here, improve the error message used if we do fail, so that it
matches the wording used in btree for a similar case.
collectMatchBitmap()'s posting-tree code path was previously not
exercised at all by our regression tests. While I can't make
a regression test that exhibits the bug, I can at least improve
the code coverage here, so do that. The test case I made for this
is an extension of one added by 4b754d6c1, so it only works in
HEAD and v13; didn't seem worth trying hard to back-patch it.
Per bug #16595 from Jesse Kinkead. This has been broken since
multicolumn capability was added to GIN (commit 27cb66fdf),
so back-patch to all supported branches.
Discussion: https://postgr.es/m/16595-633118be8eef9ce2@postgresql.org
The additional information added will be an offset number for heap
operations. This information will help us in finding the exact tuple due
to which the error has occurred.
Author: Mahendra Singh Thalor and Amit Kapila
Reviewed-by: Sawada Masahiko, Justin Pryzby and Amit Kapila
Discussion: https://postgr.es/m/CAKYtNApK488TDF4bMbw+1QH8HJf9cxdNDXquhU50TK5iv_FtCQ@mail.gmail.com
Allow BufFile to support temporary files that can be used by the single
backend when the corresponding files need to be survived across the
transaction and need to be opened and closed multiple times. Such files
need to be created as a member of a SharedFileSet.
Additionally, this commit implements the interface for BufFileTruncate to
allow files to be truncated up to a particular offset and extends the
BufFileSeek API to support the SEEK_END case. This also adds an option to
provide a mode while opening the shared BufFiles instead of always opening
in read-only mode.
These enhancements in BufFile interface are required for the upcoming
patch to allow the replication apply worker, to handle streamed
in-progress transactions.
Author: Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Previously the codes for pg_backend_memory_contexts were in
src/backend/utils/mmgr/mcxt.c. This commit moves them to
src/backend/utils/adt/mcxtfuncs.c so that mcxt.c basically includes
only the low-level interface for memory contexts.
Author: Atsushi Torikoshi
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/20200819135545.GC19121@paquier.xyz
pg_backend_memory_contexts view contains some internal information of
memory contexts. Since exposing them to any users by default may cause
security issue, this commit allows only superusers to read this view,
by default, like we do for pg_shmem_allocations view.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/1414992.1597849297@sss.pgh.pa.us
It's a bit inefficient to test if a Bitmapset is empty by counting all the
members and seeing if that number is zero. It's much better just to use
bms_is_empty(). Likewise for checking if there are at least two members,
just use bms_membership(), which does not need to do anything more after
finding two members.
Discussion: https://postgr.es/m/CAApHDvpvwm_QjbDOb5xga%2BKmX9XkN9xQavNGm3SvDbVnCYOerQ%40mail.gmail.com
Reviewed-by: Tomas Vondra
We were displaying the wrong phase information for 'info' message in the
index clean up phase because we were switching to the previous phase a bit
early. We were also not displaying context information for heap phase
unless the block number is valid which is fine for error cases but for
messages at 'info' or lower error level it appears to be inconsistent with
index phase information.
Reported-by: Sawada Masahiko
Author: Sawada Masahiko
Reviewed-by: Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k4HcbhPnCs7paRTw1K-AHin8y4xKomB9Ru0ATw0UeTy2w@mail.gmail.com
The trouble with doing this is that an apparently-constant subquery
output column isn't really constant if it is a grouping column that
appears in only some of the grouping sets. A qual using such a
column would be subject to incorrect const-folding after push-down,
as seen in bug #16585 from Paul Sivash.
To fix, just disable qual pushdown altogether if the sub-query has
nonempty groupingSets. While we could imagine far less restrictive
solutions, there is not much point in working harder right now,
because subquery_planner() won't move HAVING clauses to WHERE within
such a subquery. If the qual stays in HAVING it's not going to be
a lot more useful than if we'd kept it at the outer level.
Having said that, this restriction could be removed if we used a
parsetree representation that distinguished such outputs from actual
constants, which is something I hope to do in future. Hence, make
the patch a minimal addition rather than integrating it more tightly
(e.g. by renumbering the existing items in subquery_is_pushdown_safe's
comment).
Back-patch to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/16585-9d8c340d23ade8c1@postgresql.org
Commit 1281a5c90 rearranged the logic in this area rather drastically,
and it broke the case of adding a foreign key constraint in the same
ALTER that adds the pkey or unique constraint it depends on. While
self-referential fkeys are surely a pretty niche case, this used to
work so we shouldn't break it.
To fix, reorganize the scheduling rules in ATParseTransformCmd so
that a transformed AT_AddConstraint subcommand will be delayed into
a later pass in all cases, not only when it's been spit out as a
side-effect of parsing some other command type.
Also tweak the logic so that we won't run ATParseTransformCmd twice
while doing this. It seems to work even without that, but it's
surely wasting cycles to do so.
Per bug #16589 from Jeremy Evans. Back-patch to v13 where the new
code was introduced.
Discussion: https://postgr.es/m/16589-31c8d981ca503896@postgresql.org
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
Commit ce77abe63c allowed EXPLAIN (BUFFERS) to report the information
on buffer usage during planning phase. However three issues were
reported regarding this feature.
(1) Previously, EXPLAIN option BUFFERS required ANALYZE. So the query
had to be actually executed by specifying ANALYZE even when we
want to see only the planner's buffer usage. This was inconvenient
especially when the query was write one like DELETE.
(2) EXPLAIN included the planner's buffer usage in summary
information. So SUMMARY option had to be enabled to report that.
Also this format was confusing.
(3) The output structure for planning information was not consistent
between TEXT format and the others. For example, "Planning" tag
was output in JSON format, but not in TEXT format.
For (1), this commit allows us to perform EXPLAIN (BUFFERS) without
ANALYZE to report the planner's buffer usage.
For (2), this commit changed EXPLAIN output so that the planner's
buffer usage is reported before summary information.
For (3), this commit made the output structure for planning
information more consistent between the formats.
Back-patch to v13 where the planner's buffer usage was allowed to
be reported in EXPLAIN.
Reported-by: Pierre Giraud, David Rowley
Author: Fujii Masao
Reviewed-by: David Rowley, Julien Rouhaud, Pierre Giraud
Discussion: https://postgr.es/m/07b226e6-fa49-687f-b110-b7c37572f69e@dalibo.com
This corrects an oversight by me in 2072932407, which made
ProcArrayClearTransaction() increment xactCompletionCount. That requires an
exclusive lock, obviously.
There's other approaches that avoid the exclusive acquisition, but given that a
2PC commit is fairly heavyweight, it doesn't seem worth doing so. I've not been
able to measure a performance difference, unsurprisingly. I did add a
comment documenting that we could do so, should it ever become a bottleneck.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/1355915.1597794204@sss.pgh.pa.us
Commit a477bfc1d fixed eval_const_expressions() to ensure that it
didn't generate unnecessary RelabelType nodes, but I failed to notice
that some other places in the planner had the same issue. Really
noplace in the planner should be using plain makeRelabelType(), for
fear of generating expressions that should be equal() to semantically
equivalent trees, but aren't.
An example is that because canonicalize_ec_expression() failed
to be careful about this, we could end up with an equivalence class
containing both a plain Const, and a Const-with-RelabelType
representing exactly the same value. So far as I can tell this led to
no visible misbehavior, but we did waste a bunch of cycles generating
and evaluating "Const = Const-with-RelabelType" to prove such entries
are redundant.
Hence, move the support function added by a477bfc1d to where it can
be more generally useful, and use it in the places where planner code
previously used makeRelabelType.
Back-patch to v12, like the previous patch. While I have no concrete
evidence of any real misbehavior here, it's certainly possible that
I overlooked a case where equivalent expressions that aren't equal()
could cause a user-visible problem. In any case carrying extra
RelabelType nodes through planning to execution isn't very desirable.
Discussion: https://postgr.es/m/1311836.1597781384@sss.pgh.pa.us
This view displays the usages of all the memory contexts of the server
process attached to the current session. This information is useful to
investigate the cause of backend-local memory bloat.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But this technique
cannot be uesd in some environments because no debugger is available there.
And it outputs lots of text messages and it's not easy to analyze them.
So, pg_backend_memory_contexts view allows us to access to backend-local
memory contexts information more easily.
Bump catalog version.
Author: Atsushi Torikoshi, Fujii Masao
Reviewed-by: Tatsuhito Kasahara, Andres Freund, Daniel Gustafsson, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/72a656e0f71d0860161e0b3f67e4d771@oss.nttdata.com
When preparing a transaction xactCompletionCount needs to be
incremented, even though the transaction has not committed
yet. Otherwise the snapshot used within the transaction otherwise can
get reused outside of the prepared transaction. As GetSnapshotData()
does not include the current xid when building a snapshot, reuse would
not be correct.
Somewhat surprisingly the regression tests only rarely show incorrect
results without the fix. The reason for that is that often the
snapshot's xmax will be >= the backend xid, yielding a snapshot that
is correct, despite the bug.
I'm working on a reliable test for the bug, but it seems worth seeing
whether this fixes all the BF failures while I do.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/E1k7tGP-0005V0-5k@gemulon.postgresql.org
Previous commits made it faster/more scalable to compute snapshots. But not
building a snapshot is still faster. Now that GetSnapshotData() does not
maintain RecentGlobal* anymore, that is actually not too hard:
This commit introduces xactCompletionCount, which tracks the number of
top-level transactions with xids (i.e. which may have modified the database)
that completed in some form since the start of the server.
We can avoid rebuilding the snapshot's contents whenever the current
xactCompletionCount is the same as it was when the snapshot was
originally built. Currently this check happens while holding
ProcArrayLock. While it's likely possible to perform the check without
acquiring ProcArrayLock, it seems better to do that separately /
later, some careful analysis is required. Even with the lock this is a
significant win on its own.
On a smaller two socket machine this gains another ~1.03x, on a larger
machine the effect is roughly double (earlier patch version tested
though). If we were able to safely avoid the lock there'd be another
significant gain on top of that.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
If a commit or abort record includes "dropped relfilenodes", then replaying
the record will remove data files. That is surely a "special rel update",
but the records were not marked as such. Fix that, teach pg_rewind to
expect and ignore them, and add a test case to cover it.
It's always been like this, but no backporting for fear of breaking
existing applications. If an application parsed the WAL but was not
handling commit/abort records, it would stop working. That might be a good
thing if it really needed to handle the dropped rels, but it will be caught
when the application is updated to work with PostgreSQL v14 anyway.
Discussion: https://www.postgresql.org/message-id/07b33e2c-46a6-86a1-5f9e-a7da73fddb95%40iki.fi
Reviewed-by: Amit Kapila, Michael Paquier
xact.h included utils/datetime.h, which cannot be used in the frontend
(it includes fmgr.h, which needs Datum). But xact.h only needs the
definition of TimestampTz from it, which is available directly in
datatypes/timestamp.h. Change xact.h to include that instead of
utils/datetime.h, so that it can be used in client programs.
This bug, recently introduced in 941697c3c1, at least lead to vacuum
failing because it found tuples inserted by a running transaction, but
below the freeze limit. The freeze limit in turn is directly affected
by the aforementioned bug.
Thanks to Tom Lane figuring how to make the bug reproducible.
We should add a few more assertions to make sure this type of bug
isn't as hard to notice, but it's not yet clear how to best do so.
Co-Diagnosed-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/1013484.1597609043@sss.pgh.pa.us
Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e0. The other corrections
are more self-evident.
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
nodeSubplan.c expects that the testexpr for a hashable ANY SubPlan
has the form of one or more OpExprs whose LHS is an expression of the
outer query's, while the RHS is an expression over Params representing
output columns of the subquery. However, the planner only went as far
as verifying that the clauses were all binary OpExprs. This works
99.99% of the time, because the clauses have the right shape when
emitted by the parser --- but it's possible for function inlining to
break that, as reported by PegoraroF10. To fix, teach the planner
to check that the LHS and RHS contain the right things, or more
accurately don't contain the wrong things. Given that this has been
broken for years without anyone noticing, it seems sufficient to just
give up hashing when it happens, rather than go to the trouble of
commuting the clauses back again (which wouldn't necessarily work
anyway).
While poking at that, I also noticed that nodeSubplan.c had a baked-in
assumption that the number of hash clauses is identical to the number
of subquery output columns. Again, that's fine as far as parser output
goes, but it's not hard to break it via function inlining. There seems
little reason for that assumption though --- AFAICS, the only thing
it's buying us is not having to store the number of hash clauses
explicitly. Adding code to the planner to reject such cases would take
more code than getting nodeSubplan.c to cope, so I fixed it that way.
This has been broken for as long as we've had hashable SubPlans,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1549209182255-0.post@n3.nabble.com
Similar to the previous changes this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. In many
workloads subtransactions are very rare, and this makes the check for
that considerably cheaper.
As this removes the last member of PGXACT, there is no need to keep it
around anymore.
On a larger 2 socket machine this and the two preceding commits result
in a ~1.07x performance increase in read-only pgbench. For read-heavy
mixed r/w workloads without row level contention, I see about 1.1x.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Similar to the previous commit this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. As we now
take care to not unnecessarily write to ProcGlobal->vacuumFlags, there
should be very few modifications to the ProcGlobal->vacuumFlags array.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
The new array contains the xids for all connected backends / in-use
PGPROC entries in a dense manner (in contrast to the PGPROC/PGXACT
arrays which can have unused entries interspersed).
This improves performance because GetSnapshotData() always needs to
scan the xids of all live procarray entries and now there's no need to
go through the procArray->pgprocnos indirection anymore.
As the set of running top-level xids changes rarely, compared to the
number of snapshots taken, this substantially increases the likelihood
of most data required for a snapshot being in l2 cache. In
read-mostly workloads scanning the xids[] array will sufficient to
build a snapshot, as most backends will not have an xid assigned.
To keep the xid array dense ProcArrayRemove() needs to move entries
behind the to-be-removed proc's one further up in the array. Obviously
moving array entries cannot happen while a backend sets it
xid. I.e. locking needs to prevent that array entries are moved while
a backend modifies its xid.
To avoid locking ProcArrayLock in GetNewTransactionId() - a fairly hot
spot already - ProcArrayAdd() / ProcArrayRemove() now needs to hold
XidGenLock in addition to ProcArrayLock. Adding / Removing a procarray
entry is not a very frequent operation, even taking 2PC into account.
Due to the above, the dense array entries can only be read or modified
while holding ProcArrayLock and/or XidGenLock. This prevents a
concurrent ProcArrayRemove() from shifting the dense array while it is
accessed concurrently.
While the new dense array is very good when needing to look at all
xids it is less suitable when accessing a single backend's xid. In
particular it would be problematic to have to acquire a lock to access
a backend's own xid. Therefore a backend's xid is not just stored in
the dense array, but also in PGPROC. This also allows a backend to
only access the shared xid value when the backend had acquired an
xid.
The infrastructure added in this commit will be used for the remaining
PGXACT fields in subsequent commits. They are kept separate to make
review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Now that xmin isn't needed for GetSnapshotData() anymore, it leads to
unnecessary cacheline ping-pong to have it in PGXACT, as it is updated
considerably more frequently than the other PGXACT members.
After the changes in dc7420c2c9, this is a very straight-forward change.
For highly concurrent, snapshot acquisition heavy, workloads this change alone
can significantly increase scalability. E.g. plain pgbench on a smaller 2
socket machine gains 1.07x for read-only pgbench, 1.22x for read-only pgbench
when submitting queries in batches of 100, and 2.85x for batches of 100
'SELECT';. The latter numbers are obviously not to be expected in the
real-world, but micro-benchmark the snapshot computation
scalability (previously spending ~80% of the time in GetSnapshotData()).
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
When a table is scanned by heapam_index_build_range_scan (née
IndexBuildHeapScan) and the table lock being held allows concurrent data
changes, it is possible for new HOT chains to sprout in a page that were
unknown when the scan of a page happened. This leads to an error such
as
ERROR: failed to find parent tuple for heap-only tuple at (X,Y) in table "tbl"
because the root tuple was not present when we first obtained the list
of the page's root tuples. This can be fixed by re-obtaining the list
of root tuples, if we see that a heap-only tuple appears to point to a
non-existing root.
This was reported by Anastasia as occurring for BRIN summarization
(which exists since 9.5), but I think it could theoretically also happen
with CREATE INDEX CONCURRENTLY (much older) or REINDEX CONCURRENTLY
(very recent). It seems a happy coincidence that BRIN forces us to
backpatch this all the way to 9.5.
Reported-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/602d8487-f0b2-5486-0088-0f372b2549fa@postgrespro.ru
Backpatch: 9.5 - master
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
If a page range is desummarized at just the right time concurrently with
an index walk, BRIN would raise an error indicating index corruption.
This is scary and unhelpful; silently returning that the page range is
not summarized is sufficient reaction.
This bug was introduced by commit 975ad4e602 as additional protection
against a bug whose actual fix was elsewhere. Backpatch equally.
Reported-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/2588667e-d07d-7e10-74e2-7e1e46194491@postgrespro.ru
Backpatch: 9.5 - master
This had gotten a little disjointed over time, and some of the grammar
was sloppy. Rewrite for more clarity.
In passing, re-pgindent some recently added comments.
No code changes.
The reason for doing so is that a subsequent commit will need that to
avoid wraparound issues. As the subsequent change is large this was
split out for easier review.
The reason this is not a perfect straight-forward change is that we do
not want track 64bit xids in the procarray or the WAL. Therefore we
need to advance lastestCompletedXid in relation to 32 bit xids. The
code for that is now centralized in MaintainLatestCompletedXid*.
Author: Andres Freund
Reviewed-By: Thomas Munro, Robert Haas, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
This is like CVE-2018-1058 commit
582edc369c. Today, a malicious user of a
publisher or subscriber database can invoke arbitrary SQL functions
under an identity running replication, often a superuser. This fix may
cause "does not exist" or "no schema has been selected to create in"
errors in a replication process. After upgrading, consider watching
server logs for these errors. Objects accruing schema qualification in
the wake of the earlier commit are unlikely to need further correction.
Back-patch to v10, which introduced logical replication.
Security: CVE-2020-14349
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
Testing that an unsigned variable is >= 0 is pretty pointless,
as noted by Coverity and numerous buildfarm members.
In passing, add comment about new uses of "volatile" --- Coverity
doesn't much like that either, but it seems probably necessary.
Ashutosh Bapat noticed that when logical walsender needs to wait for
WAL, and it realizes that it must send a keepalive message to
walreceiver to update the sent-LSN, which *does not* request a reply
from walreceiver, it wrongly sets the flag that it's going to wait for
that reply. That means that any future would-be sender of feedback
messages ends up not sending a feedback message, because they all
believe that a reply is expected.
With built-in logical replication there's not much harm in this, because
WalReceiverMain will send a ping-back every wal_receiver_timeout/2
anyway; but with other logical replication systems (e.g. pglogical) it
can cause significant pain.
This problem was introduced in commit 41d5f8ad73, where the
request-reply flag was changed from true to false to WalSndKeepalive,
without at the same time removing the line that sets
waiting_for_ping_response.
Just removing that line would be a sufficient fix, but it seems better
to shift the responsibility of setting the flag to WalSndKeepalive
itself instead of requiring caller to do it; this is clearly less
error-prone.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Backpatch: 9.5 and up
Discussion: https://postgr.es/m/20200806225558.GA22401@alvherre.pgsql
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Make the nbtree page split REDO routine consistent with original
execution in its approach to acquiring and releasing buffer locks (at
least for pages on the tree level of the page being split). This brings
btree_xlog_split() in line with btree_xlog_unlink_page(), which was
taught to couple buffer locks by commit 9a9db08a.
Note that the precise order in which we both acquire and release sibling
buffer locks in btree_xlog_split() now matches original execution
exactly (the precise order in which the locks are released probably
doesn't matter much, but we might as well be consistent about it).
The rule for nbtree REDO routines from here on is that same-level locks
should be acquired in an order that's consistent with original
execution. It's not practical to have a similar rule for cross-level
page locks, since for the most part original execution holds those locks
for a period that spans multiple atomic actions/WAL records. It's also
not necessary, because clearly the cross-level lock coupling is only
truly needed during original execution because of the presence of
concurrent inserters.
This is not a bug fix (unlike the similar aforementioned commit, commit
9a9db08a). The immediate reason to tighten things up in this area is to
enable an upcoming enhancement to contrib/amcheck that allows it to
verify that sibling links are in agreement with only an AccessShareLock
(this check produced false positives when run on a replica server on
account of the inconsistency fixed by this commit). But that's not the
only reason to be stricter here.
It is generally useful to make locking on replicas be as close to what
happens during original execution as practically possible. It makes it
less likely that hard to catch bugs will slip in in the future. The
previous state of affairs seems to be a holdover from before the
introduction of Hot Standby, when buffer lock acquisitions during
recovery were totally unnecessary. See also: commit 3bbf668d, which
tightened things up in this area a few years after the introduction of
Hot Standby.
Discussion: https://postgr.es/m/CAH2-Wz=465cJj11YXD9RKH8z=nhQa2dofOZ_23h67EXUGOJ00Q@mail.gmail.com
Make the nbtree page split REDO routine variable names consistent with
_bt_split() (which handles the original execution of page splits).
These names make the code easier to follow by making the distinction
between the original page and the left half of the split clear. (The
left half of the split page is a temp page that REDO creates to replace
the origpage contents.)
Also reduce the elevel used when adding a new high key to the temp page
from PANIC to ERROR to be consistent. We already only raise an ERROR
when data item PageAddItem() temp page calls fail.
Commit 13838740f fixed some issues with step generation in partition
pruning, but there was yet another one: get_steps_using_prefix() assumes
that clauses in the passed-in prefix list are sorted in ascending order
of their partition key numbers, but the caller failed to ensure this for
range partitioning, which led to an assertion failure in debug builds.
Adjust the caller function to arrange the clauses in the prefix list in
the required order for range partitioning.
Back-patch to v11, like the previous commit.
Patch by me, reviewed by Amit Langote.
Discussion: https://postgr.es/m/CAPmGK16jkXiFG0YqMbU66wte-oJTfW6D1HaNvQf%3D%2B5o9%3Dm55wQ%40mail.gmail.com
9bdb300de modified the EXPLAIN output for Hash Aggregate to show details
from parallel workers. However, it neglected to consider that a given
parallel worker may not have assisted with the given Hash Aggregate. This
can occur when workers fail to start or during Parallel Append with
enable_partitionwise_join enabled when only a single worker is working on
a non-parallel aware sub-plan. It could also happen if a worker simply
wasn't fast enough to get any work done before other processes went and
finished all the work.
The bogus output came from the fact that ExplainOpenWorker() skipped
showing any details for non-initialized workers but show_hashagg_info()
did show details from the worker. This meant that the worker properties
that were shown were not properly attributed to the worker that they
belong to.
In passing, we also now don't show Hash Aggregate properties for the
leader process when it did not contribute any work to the Hash Aggregate.
This can occur either during Parallel Append when only a parallel worker
worked on a given sub plan or with parallel_leader_participation set to
off. This aims to make the behavior of Hash Aggregate's EXPLAIN output
more similar to Sort's.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20200805012105.GZ28072%40telsasoft.com
Backpatch-through: 13, where the original breakage was introduced
This seems more correct, because other before_shmem_exit calls may
expect the infrastructure that is needed to run queries and access the
database to be working, and also because this cleanup has nothing to
do with shared memory.
There are no known user-visible consequences to this, though, apart
from what was previous fixed by commit
303640199d and back-patched as commit
bcbc27251d and commit
f7013683d9, so for now, no back-patch.
Bharath Rupireddy
Discussion: http://postgr.es/m/CALj2ACWk7j4F2v2fxxYfrroOF=AdFNPr1WsV+AGtHAFQOqm_pw@mail.gmail.com
Since we no longer require AccessExclusiveLock to add a partition,
the executor may see that a partitioned table has more partitions
than the planner saw. ExecCreatePartitionPruneState's code for
matching up the partition lists in such cases was faulty, and would
misbehave if the planner had successfully pruned any partitions from
the query. (Thus, trouble would occur only if a partition addition
happens concurrently with a query that uses both static and dynamic
partition pruning.) This led to an Assert failure in debug builds,
and probably to crashes or query misbehavior in production builds.
To repair the bug, just explicitly skip zeroes in the plan's
relid_map[] list. I also made some cosmetic changes to make the code
more readable (IMO anyway). Also, convert the cross-checking Assert
to a regular test-and-elog, since it's now apparent that this logic
is more fragile than one would like.
Currently, there's no way to repeatably exercise this code, except
with manual use of a debugger to stop the backend between planning
and execution. Hence, no test case in this patch. We oughta do
something about that testability gap, but that's for another day.
Amit Langote and Tom Lane, per report from Justin Pryzby. Oversight
in commit 898e5e329; backpatch to v12 where that appeared.
Discussion: https://postgr.es/m/20200802181131.GA27754@telsasoft.com
Currently, page unlink leaves remaining items "as is", but replay of
corresponding WAL-record re-initializes page leaving it with no items.
For the sake of consistency, this commit makes primary delete all the items
during page unlink as well.
Thanks to this change, we now don't mask contents of deleted btree page for
WAL consistency checking.
Discussion: https://postgr.es/m/CAPpHfdt_OTyQpXaPJcWzV2N-LNeNJseNB-K_A66qG%3DL518VTFw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
It was possible for the logic used by backward scans (which must reason
about concurrent page splits/deletions in its own peculiar way) to
become confused when running on a replica. Concurrent replay of a WAL
record that describes the second phase of page deletion could cause
_bt_walk_left() to get confused. btree_xlog_unlink_page() simply failed
to adhere to the same locking protocol that we use on the primary, which
is obviously wrong once you consider these two disparate functions
together. This bug is present in all stable branches.
More concretely, the problem was that nothing stopped _bt_walk_left()
from observing inconsistencies between the deletion's target page and
its original sibling pages when running on a replica. This is true even
though the second phase of page deletion is supposed to work as a single
atomic action. Queries running on replicas raised "could not find left
sibling of block %u in index %s" can't-happen errors when they went back
to their scan's "original" page and observed that the page has not been
marked deleted (even though it really was concurrently deleted).
There is no evidence that this actually happened in the real world. The
issue came to light during unrelated feature development work. Note
that _bt_walk_left() is the only code that cares about the difference
between a half-dead page and a fully deleted page that isn't also
exclusively used by nbtree VACUUM (unless you include contrib/amcheck
code). It seems very likely that backward scans are the only thing that
could become confused by the inconsistency. Even amcheck's complex
bt_right_page_check_scankey() dance was unaffected.
To fix, teach btree_xlog_unlink_page() to lock the left sibling, target,
and right sibling pages in that order before releasing any locks (just
like _bt_unlink_halfdead_page()). This is the simplest possible
approach. There doesn't seem to be any opportunity to be more clever
about lock acquisition in the REDO routine, and it hardly seems worth
the trouble in any case.
This fix might enable contrib/amcheck verification of leaf page sibling
links with only an AccessShareLock on the relation. An amcheck patch
from Andrey Borodin was rejected back in January because it clashed with
btree_xlog_unlink_page()'s lax approach to locking pages. It now seems
likely that the real problem was with btree_xlog_unlink_page(), not the
patch.
This is a low severity, low likelihood bug, so no backpatch.
Author: Michail Nikolaev
Diagnosed-By: Michail Nikolaev
Discussion: https://postgr.es/m/CANtu0ohkR-evAWbpzJu54V8eCOtqjJyYp3PQ_SGoBTRGXWhWRw@mail.gmail.com
Add a documenting assertion that's similar to the nearby assertion added
by commit cd8c73a3. This conveys that the entire call to _bt_pagedel()
does no work if it isn't possible to get a descent stack for the initial
scanblkno page.
This is useful for monitoring purposes with log parsing. Similarly to
pg_stat_activity, the leader's PID is shown only for active parallel
workers, minimizing the log footprint for the leaders as the equivalent
shared memory field is set as long as a backend is alive.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier, Julien Rouhaud, Tom Lane
Discussion: https://postgr.es/m/20200315111831.GA21492@telsasoft.com
We have edge-case bugs when assigning values in the last few dozen pages
before the wrap limit. We may introduce similar bugs in the future. At
default BLCKSZ, this makes such bugs unreachable outside of single-user
mode. Also, when VACUUM began to consume mxacts, multiStopLimit did not
change to compensate.
pg_upgrade may fail on a cluster that was already printing "must be
vacuumed" warnings. Follow the warning's instructions to clear the
warning, then run pg_upgrade again. One can still, peacefully consume
98% of XIDs or mxacts, so DBAs need not change routine VACUUM settings.
Discussion: https://postgr.es/m/20200621083513.GA3074645@rfd.leadboat.com
This allows AM-specific knowledge to be applied during creation of
pg_amop and pg_amproc entries. Specifically, the AM knows better than
core code which entries to consider as required or optional. Giving
the latter entries the appropriate sort of dependency allows them to
be dropped without taking out the whole opclass or opfamily; which
is something we'd like to have to correct obsolescent entries in
extensions.
This callback also opens the door to performing AM-specific validity
checks during opclass creation, rather than hoping than an opclass
developer will remember to test with "amvalidate". For the most part
I've not actually added any such checks yet; that can happen in a
follow-on patch. (Note that we shouldn't remove any tests from
"amvalidate", as those are still needed to cross-check manually
constructed entries in the initdb data. So adding tests to
"amadjustmembers" will be somewhat duplicative, but it seems like
a good idea anyway.)
Patch by me, reviewed by Alexander Korotkov, Hamid Akhtar, and
Anastasia Lubennikova.
Discussion: https://postgr.es/m/4578.1565195302@sss.pgh.pa.us
When doing multiple insertions in pg_shdepend for the copy of
dependencies from a template database in CREATE DATABASE, the same
number of slots would have been created and used all the time. As the
number of items to insert is not known in advance, this makes most of
the slots created for nothing. This improves the slot handling so as
slot creation only happens when needed, minimizing the overhead of the
operation.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200731024148.GB3317@paquier.xyz
When reading the code it's not obvious when one should prefer dynahash
over simplehash and vice-versa, so, for programmer-friendliness, add
comments to inform that decision.
Show sample simplehash method signatures.
Author: James Coleman <jtc331@gmail.com>
Discussion: https://postgr.es/m/CAAaqYe_dOF39gAJ8rL-a3YO3Qo96MHMRQ2whFjK5ZcU6YvMQSA%40mail.gmail.com
If a base type supports typmods, its array type does too, with the
same interpretation. Hence changes in pg_type.typmodin/typmodout
must be propagated to the array type.
While here, improve AlterTypeRecurse to not recurse to domains if
there is nothing we'd need to change.
Oversight in fe30e7ebf. Back-patch to v13 where that came in.
The new hlCover() algorithm that I introduced in commit c9b0c678d
turns out to potentially take O(N^2) or worse time on long documents,
if there are many occurrences of individual query words but few or no
substrings that actually satisfy the query. (One way to hit this
behavior is with a "common_word & rare_word" type of query.) This
seems unavoidable given the original goal of checking every substring
of the document, so we have to back off that idea. Fortunately, it
seems unlikely that anyone would really want headlines spanning all of
a long document, so we can avoid the worse-than-linear behavior by
imposing a maximum length of substring that we'll consider.
For now, just hard-wire that maximum length as a multiple of max_words
times max_fragments. Perhaps at some point somebody will argue for
exposing it as a ts_headline parameter, but I'm hesitant to make such
a feature addition in a back-patched bug fix.
I also noted that the hlFirstIndex() function I'd added in that
commit was unnecessarily stupid: it really only needs to check whether
a HeadlineWordEntry's item pointer is null or not. This wouldn't make
all that much difference in typical cases with queries having just
a few terms, but a cycle shaved is a cycle earned.
In addition, add a CHECK_FOR_INTERRUPTS call in TS_execute_recurse.
This ensures that hlCover's loop is cancellable if it manages to take
a long time, and it may protect some other TS_execute callers as well.
Back-patch to 9.6 as the previous commit was. I also chose to add the
CHECK_FOR_INTERRUPTS call to 9.5. The old hlCover() algorithm seems
to avoid the O(N^2) behavior, at least on the test case I tried, but
nonetheless it's not very quick on a long document.
Per report from Stephen Frost.
Discussion: https://postgr.es/m/20200724160535.GW12375@tamriel.snowman.net
Create an optional region in the main shared memory segment that can be
used to acquire and release "fast" DSM segments, and can benefit from
huge pages allocated at cluster startup time, if configured. Fall back
to the existing mechanisms when that space is full. The size is
controlled by a new GUC min_dynamic_shared_memory, defaulting to 0.
Main region DSM segments initially contain whatever garbage the memory
held last time they were used, rather than zeroes. That change revealed
that DSA areas failed to initialize themselves correctly in memory that
wasn't zeroed first, so fix that problem.
Discussion: https://postgr.es/m/CA%2BhUKGLAE2QBv-WgGp%2BD9P_J-%3Dyne3zof9nfMaqq1h3EGHFXYQ%40mail.gmail.com
Avoid repeatedly calling lseek(SEEK_END) during recovery by caching
the size of each fork. For now, we can't use the same technique in
other processes, because we lack a shared invalidation mechanism.
Do this by generalizing the pre-existing caching used by FSM and VM
to support all forks.
Discussion: https://postgr.es/m/CAEepm%3D3SSw-Ty1DFcK%3D1rU-K6GSzYzfdD4d%2BZwapdN7dTa6%3DnQ%40mail.gmail.com
For pg_attribute, this allows to insert at once a full set of attributes
for a relation (roughly 15% of WAL reduction in extreme cases). For
pg_shdepend, this reduces the work done when creating new shared
dependencies from a database template. The number of slots used for the
insertion is capped at 64kB of data inserted for both, depending on the
number of items to insert and the length of the rows involved.
More can be done for other catalogs, like pg_depend. This part requires
a different approach as the number of slots to use depends also on the
number of entries discarded as pinned dependencies. This is also
related to the rework or dependency handling for ALTER TABLE and CREATE
TABLE, mainly.
Author: Daniel Gustafsson
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20190213182737.mxn6hkdxwrzgxk35@alap3.anarazel.de
Create LatchWaitSet at backend startup time, and use it to implement
WaitLatch(). This avoids repeated epoll/kqueue setup and teardown
system calls.
Reorder SubPostmasterMain() slightly so that we restore the postmaster
pipe and Windows signal emulation before we reach InitPostmasterChild(),
to make this work in EXEC_BACKEND builds.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
When fast promotion was supported in 9.3, non-fast promotion became
undocumented feature and it's basically not available for ordinary users.
However we decided not to remove non-fast promotion at that moment,
to leave it for a release or two for debugging purpose or as an emergency
method because fast promotion might have some issues, and then to
remove it later. Now, several versions were released since that decision
and there is no longer reason to keep supporting non-fast promotion.
Therefore this commit removes non-fast promotion.
Author: Fujii Masao
Reviewed-by: Hamid Akhtar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/76066434-648f-f567-437b-54853b43398f@oss.nttdata.com
Use HyperLogLog to estimate the group cardinality in a spilled
partition. This estimate is used to choose the number of partitions if
we recurse.
The previous behavior was to use the number of tuples in a spilled
partition as the estimate for the number of groups, which lead to
overpartitioning. That could cause the number of batches to be much
higher than expected (with each batch being very small), which made it
harder to interpret EXPLAIN ANALYZE results.
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/a856635f9284bc36f7a77d02f47bbb6aaf7b59b3.camel@j-davis.com
Backpatch-through: 13
There were various unnecessary differences between Hash Agg's EXPLAIN
ANALYZE output and Hash Join's. Here we modify the Hash Agg output so
that it's better aligned to Hash Join's.
The following changes have been made:
1. Start batches counter at 1 instead of 0.
2. Always display the "Batches" property, even when we didn't spill to
disk.
3. Use the text "Batches" instead of "HashAgg Batches" for text format.
4. Use the text "Memory Usage" instead of "Peak Memory Usage" for text
format.
5. Include "Batches" before "Memory Usage" in both text and non-text
formats.
In passing also modify the "Planned Partitions" property so that we show
it regardless of if the value is 0 or not for non-text EXPLAIN formats.
This was pointed out by Justin Pryzby and probably should have been part
of 40efbf870.
Reviewed-by: Justin Pryzby, Jeff Davis
Discussion: https://postgr.es/m/CAApHDvrshRnA6C0VFnu7Fb9TVvgGo80PUMm5+2DiaS1gEkPvtw@mail.gmail.com
Backpatch-through: 13, where HashAgg batching was introduced
This adds seven methods to the output plugin API, adding support for
streaming changes of large in-progress transactions.
* stream_start
* stream_stop
* stream_abort
* stream_commit
* stream_change
* stream_message
* stream_truncate
Most of this is a simple extension of the existing methods, with
the semantic difference that the transaction (or subtransaction)
is incomplete and may be aborted later (which is something the
regular API does not really need to deal with).
This also extends the 'test_decoding' plugin, implementing these
new stream methods.
The stream_start/start_stop are used to demarcate a chunk of changes
streamed for a particular toplevel transaction.
This commit simply adds these new APIs and the upcoming patch to "allow
the streaming mode in ReorderBuffer" will use these APIs.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
In the case of range partitioning, get_steps_using_prefix() assumes that
the passed-in prefix list contains at least one clause for each of the
partition keys earlier than one specified in the passed-in
step_lastkeyno, but the caller (ie, gen_prune_steps_from_opexps())
didn't take it into account, which led to a server crash or incorrect
results when the list contained no clauses for such partition keys, as
reported in bug #16500 and #16501 from Kobayashi Hisanori. Update the
caller to call that function only when the list created there contains
at least one clause for each of the earlier partition keys in the case
of range partitioning.
While at it, fix some other issues:
* The list to pass to get_steps_using_prefix() is allowed to contain
multiple clauses for the same partition key, as described in the
comment for that function, but that function actually assumed that the
list contained just a single clause for each of middle partition keys,
which led to an assertion failure when the list contained multiple
clauses for such partition keys. Update that function to match the
comment.
* In the case of hash partitioning, partition keys are allowed to be
NULL, in which case the list to pass to get_steps_using_prefix()
contains no clauses for NULL partition keys, but that function treats
that case as like the case of range partitioning, which led to the
assertion failure. Update the assertion test to take into account
NULL partition keys in the case of hash partitioning.
* Fix a typo in a comment in get_steps_using_prefix_recurse().
* gen_partprune_steps() failed to detect self-contradiction from
strict-qual clauses and an IS NULL clause for the same partition key
in some cases, producing incorrect partition-pruning steps, which led
to incorrect results of partition pruning, but didn't cause any
user-visible problems fortunately, as the self-contradiction is
detected later in the query planning. Update that function to detect
the self-contradiction.
Per bug #16500 and #16501 from Kobayashi Hisanori. Patch by me, initial
diagnosis for the reported issue and review by Dmitry Dolgov.
Back-patch to v11, where partition pruning was introduced.
Discussion: https://postgr.es/m/16500-d1613f2a78e1e090%40postgresql.org
Discussion: https://postgr.es/m/16501-5234a9a0394f6754%40postgresql.org
Note: This GUC was originally named enable_hashagg_disk when it appeared
in commit 1f39bce0, which added disk-based hash aggregation. It was
subsequently renamed in commit 92c58fd9.
Author: Peter Geoghegan
Reviewed-By: Jeff Davis, Álvaro Herrera
Discussion: https://postgr.es/m/9d9d1e1252a52ea1bad84ea40dbebfd54e672a0f.camel%40j-davis.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
Previously we would allocate blocks to parallel workers during a parallel
sequential scan 1 block at a time. Since other workers were likely to
request a block before a worker returns for another block number to work
on, this could lead to non-sequential I/O patterns in each worker which
could cause the operating system's readahead to perform poorly or not at
all.
Here we change things so that we allocate consecutive "chunks" of blocks
to workers and have them work on those until they're done, at which time
we allocate another chunk for the worker. The size of these chunks is
based on the size of the relation.
Initial patch here was by Thomas Munro which showed some good improvements
just having a fixed chunk size of 64 blocks with a simple ramp-down near
the end of the scan. The revisions of the patch to make the chunk size
based on the relation size and the adjusted ramp-down in powers of two was
done by me, along with quite extensive benchmarking to determine the
optimal chunk sizes.
For the most part, benchmarks have shown significant performance
improvements for large parallel sequential scans on Linux, FreeBSD and
Windows using SSDs. It's less clear how this affects the performance of
cloud providers. Tests done so far are unable to obtain stable enough
performance to provide meaningful benchmark results. It is possible that
this could cause some performance regressions on more obscure filesystems,
so we may need to later provide users with some ability to get something
closer to the old behavior. For now, let's leave that until we see that
it's really required.
Author: Thomas Munro, David Rowley
Reviewed-by: Ranier Vilela, Soumyadeep Chakraborty, Robert Haas
Reviewed-by: Amit Kapila, Kirk Jamison
Discussion: https://postgr.es/m/CA+hUKGJ_EErDv41YycXcbMbCBkztA34+z1ts9VQH+ACRuvpxig@mail.gmail.com
The initial implementation of leader_pid in pg_stat_activity added by
b025f32 took the approach to strictly print what a PGPROC entry
includes. In short, if a backend has been involved in parallel query at
least once, leader_pid would remain set as long as the backend is alive.
For a parallel group leader, this means that the field would always be
set after it participated at least once in parallel query, and after
more discussions this could be confusing if using for example a
connection pooler.
This commit changes the data printed so as leader_pid becomes always
NULL for a parallel group leader, showing up a non-NULL value only for
the parallel workers, and actually as long as a parallel query is
running as workers are shut down once the query has completed.
This does not change the definition of any catalog, so no catalog bump
is needed. Per discussion with Justin Pryzby, Álvaro Herrera, Julien
Rouhaud and me.
Discussion: https://postgr.es/m/20200721035145.GB17300@paquier.xyz
Backpatch-through: 13
OpenSSL deprecated RAND_cleanup(), and OpenSSL 1.1.0 made it into a
no-op. Replace it with RAND_poll(), per an OpenSSL community
recommendation. While this has no user-visible consequences under
OpenSSL defaults, it might help under non-default settings.
Daniel Gustafsson, reviewed by David Steele and Michael Paquier.
Discussion: https://postgr.es/m/9B038FA5-23E8-40D0-B932-D515E1D8F66A@yesql.se
At least on Linux and macOS, fread() turns out to have far higher
per-call overhead than one could wish. Reading 64KB of data at a time
and then parceling it out with our own memcpy logic makes binary COPY
from a file significantly faster --- around 30% in simple testing for
cases with narrow text columns (on Linux ... even more on macOS).
In binary COPY from frontend, there's no per-call fread(), and this
patch introduces an extra layer of memcpy'ing, but it still manages
to eke out a small win. Apparently, the control-logic overhead in
CopyGetData() is enough to be worth avoiding for small fetches.
Bharath Rupireddy and Amit Langote, reviewed by Vignesh C,
cosmetic tweaks by me
Discussion: https://postgr.es/m/CALj2ACU5Bz06HWLwqSzNMN=Gupoj6Rcn_QVC+k070V4em9wu=A@mail.gmail.com
Commit 85c9d347 addressed a similar problem for Gather and Gather
Merge nodes but forgot to account for nodes above parallel nodes. This
still works for nodes above Gather node because we shut down the workers
for Gather node as soon as there are no more tuples. We can do a similar
thing for Gather Merge as well but it seems better to account for stats
during nodes shutdown after completing the execution.
Reported-by: Stéphane Lorek, Jehan-Guillaume de Rorthais
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/20200718160206.584532a2@firost
Tom Lane
Amit Kapila
Jeff Davis
Alvaro Herrera
Etsuro Fujita
Michael Paquier
Noah Misch
Peter Eisentraut
Andres Freund
Thomas Munro
Magnus Hagander
Bruce Momjian
Fujii Masao
David Rowley
Heikki Linnakangas
Peter Geoghegan
Robert Haas
Alexander Korotkov