StrategyGetBuffer() has proven to be a bottleneck in a number of
buffer acquisition heavy workloads. To some degree this has already
been alleviated by 5d7962c6, but it still can be quite a heavy
bottleneck. The problem is that in unfortunate usage patterns a
single StrategyGetBuffer() call will have to look at a large number of
buffers - in turn making it likely that the process will be put to
sleep while still holding the spinlock.
Replace most of the usage of the buffer_strategy_lock spinlock for the
clock sweep by a atomic nextVictimBuffer variable. That variable,
modulo NBuffers, is the current hand of the clock sweep. The buffer
clock-sweep then only needs to acquire the spinlock after a
wraparound. And even then only in the process that did the wrapping
around. That alleviates nearly all the contention on the relevant
spinlock, although significant contention on the cacheline can still
exist.
Reviewed-By: Robert Haas and Amit Kapila
Discussion: 20141010160020.GG6670@alap3.anarazel.de,
20141027133218.GA2639@awork2.anarazel.de
The old LWLock implementation had the problem that concurrent lock
acquisitions required exclusively acquiring a spinlock. Often that
could lead to acquirers waiting behind the spinlock, even if the
actual LWLock was free.
The new implementation doesn't acquire the spinlock when acquiring the
lock itself. Instead the new atomic operations are used to atomically
manipulate the state. Only the waitqueue, used solely in the slow
path, is still protected by the spinlock. Check lwlock.c's header for
an explanation about the used algorithm.
For some common workloads on larger machines this can yield
significant performance improvements. Particularly in read mostly
workloads.
Reviewed-By: Amit Kapila and Robert Haas
Author: Andres Freund
Discussion: 20130926225545.GB26663@awork2.anarazel.de
Besides being shorter and much easier to read it changes the logic in
LWLockRelease() to release all shared lockers when waking up any. This
can yield some significant performance improvements - and the fairness
isn't really much worse than before, as we always allowed new shared
lockers to jump the queue.
Hiding context messages usually is not a good idea - except for rather
verbose debugging/development utensils like LOG_DEBUG. There the
amount of repeated context messages just bloat the log without adding
information.
Exposing compression and decompression APIs of pglz makes possible its
use by extensions and contrib modules. pglz_decompress contained a call
to elog to emit an error message in case of corrupted data. This function
is changed to return a status code to let its callers return an error instead.
This commit is required for upcoming WAL compression feature so that
the WAL reader facility can decompress the WAL data by using pglz_decompress.
Michael Paquier
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
This allows access to get_object_address from SQL, which is useful to
obtain OID addressing information from data equivalent to that emitted
by the parser. This is necessary infrastructure of a project to let
replication systems propagate object dropping events to remote servers,
where the schema might be different than the server originating the
DROP.
This patch also adds support for OBJECT_DEFAULT to get_object_address;
that is, it is now possible to refer to a column's default value.
Catalog version bumped due to the new function.
Reviewed by Stephen Frost, Heikki Linnakangas, Robert Haas, Andres
Freund, Abhijit Menon-Sen, Adam Brightwell.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
Apart from enabling comments on domain constraints, this enables a
future project to replicate object dropping to remote servers: with the
current mechanism there's no way to distinguish between the two types of
constraints, so there's no way to know what to drop.
Also added support for the domain constraint comments in psql's \dd and
pg_dump.
Catalog version bumped due to the change in ObjectType enum.
This allows it to be used with ALTER ROLE SET.
Although the old setting of PGC_BACKEND prevented changes after session
start, after discussion it was more useful to allow ALTER ROLE SET
instead and just document that changes during a session have no effect.
This is similar to how session_preload_libraries works already.
An alternative would be to change things to allow PGC_BACKEND and
PGC_SU_BACKEND settings to be changed by ALTER ROLE SET. But that might
need further research (e.g., log_connections would probably not work).
based on patch by Kyotaro Horiguchi
This performs slightly better, uses less memory, and needs slightly less
code in GiST, than the Red-Black tree previously used.
Reviewed by Peter Geoghegan
XLogFileInit() returns a file descriptor, which needs to be closed. The leak
was short-lived, since the startup process exits shortly afterwards, but it
was clearly a bug, nevertheless.
Per Coverity report.
Add "normal" and "original" flags as output columns to the
pg_event_trigger_dropped_objects() function. With this it's possible to
distinguish which objects, among those listed, need to be explicitely
referenced when trying to replicate a deletion.
This is necessary so that the list of objects can be pruned to the
minimum necessary to replicate the DROP command in a remote server that
might have slightly different schema (for instance, TOAST tables and
constraints with different names and such.)
Catalog version bumped due to change of function definition.
Reviewed by: Abhijit Menon-Sen, Stephen Frost, Heikki Linnakangas,
Robert Haas.
We used time(null) to set a TimestampTz field, which gave bogus results.
Noticed while looking at pg_xlogdump output.
Backpatch to 9.3 and above, where the fast promotion was introduced.
In LWLockRelease() (and in 9.4+ LWLockUpdateVar()) we release enqueued
waiters using PGSemaphoreUnlock(). As there are other sources of such
unlocks backends only wake up if MyProc->lwWaiting is set to false;
which is only done in the aforementioned functions.
Before this commit there were dangers because the store to lwWaitLink
could become visible before the store to lwWaitLink. This could both
happen due to compiler reordering (on most compilers) and on some
platforms due to the CPU reordering stores.
The possible consequence of this is that a backend stops waiting
before lwWaitLink is set to NULL. If that backend then tries to
acquire another lock and has to wait there the list could become
corrupted once the lwWaitLink store is finally performed.
Add a write memory barrier to prevent that issue.
Unfortunately the barrier support has been only added in 9.2. Given
that the issue has not knowingly been observed in praxis it seems
sufficient to prohibit compiler reordering using volatile for 9.0 and
9.1. Actual problems due to compiler reordering are more likely
anyway.
Discussion: 20140210134625.GA15246@awork2.anarazel.de
Author: Jim Nasby, some kibitzing by Heikki Linnankangas.
Discussion leading to current behavior and precise wording fueled by
thoughts from Robert Haas and Andres Freund.
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
Two changes:
1. When copying a WAL segment from old timeline to create the first segment
on the new timeline, only copy up to the point where the timeline switch
happens, and zero-fill the rest. This avoids corner cases where we might
think that the copied WAL from the previous timeline belong to the new
timeline.
2. If the timeline switch happens at a segment boundary, don't copy the
whole old segment to the new timeline. It's pointless, because it's 100%
identical to the old segment.
st_changecount protocol needs the memory barriers to ensure that
the apparent order of execution is as it desires. Otherwise,
for example, the CPU might rearrange the code so that st_changecount
is incremented twice before the modification on a machine with
weak memory ordering. This surprising result can lead to bugs.
This commit introduces the macros to load and store st_changecount
with the memory barriers. These are called before and after
PgBackendStatus entries are modified or copied into private memory,
in order to prevent CPU from reordering PgBackendStatus access.
Per discussion on pgsql-hackers, we decided not to back-patch this
to 9.4 or before until we get an actual bug report about this.
Patch by me. Review by Robert Haas.
In generate_series_step_numeric(), the variables "start_num"
and "stop_num" may be potentially freed until the next call.
So they should be put in the location which can survive across calls.
But previously they were not, and which could cause incorrect
behavior of generate_series(numeric, numeric). This commit fixes
this problem by copying them on multi_call_memory_ctx.
Andrew Gierth
When starting up from a basebackup taken off a standby extra logic has
to be applied to compute the point where the data directory is
consistent. Normal base backups use a WAL record for that purpose, but
that isn't possible on a standby.
That logic had a error check ensuring that the cluster's control file
indicates being in recovery. Unfortunately that check was too strict,
disregarding the fact that the control file could also indicate that
the cluster was shut down while in recovery.
That's possible when the a cluster starting from a basebackup is shut
down before the backup label has been removed. When everything goes
well that's a short window, but when either restore_command or
primary_conninfo isn't configured correctly the window can get much
wider. That's because inbetween reading and unlinking the label we
restore the last checkpoint from WAL which can need additional WAL.
To fix simply also allow starting when the control file indicates
"shutdown in recovery". There's nicer fixes imaginable, but they'd be
more invasive.
Backpatch to 9.2 where support for taking basebackups from standbys
was added.
As with NOT NULL constraints, we consider that such constraints are merely
reports of constraints that are being enforced by the remote server (or
other underlying storage mechanism). Their only real use is to allow
planner optimizations, for example in constraint-exclusion checks. Thus,
the code changes here amount to little more than removal of the error that
was formerly thrown for applying CHECK to a foreign table.
(In passing, do a bit of cleanup of the ALTER FOREIGN TABLE reference page,
which had accumulated some weird decisions about ordering etc.)
Shigeru Hanada and Etsuro Fujita, reviewed by Kyotaro Horiguchi and
Ashutosh Bapat.
MapArrayTypeName would copy up to NAMEDATALEN-1 bytes of the base type
name, which of course is wrong: after prepending '_' there is only room for
NAMEDATALEN-2 bytes. Aside from being the wrong result, this case would
lead to overrunning the statically allocated work buffer. This would be a
security bug if the function were ever used outside bootstrap mode, but it
isn't, at least not in any currently supported branches.
Aside from fixing the off-by-one loop logic, this patch gets rid of the
static work buffer by having MapArrayTypeName pstrdup its result; the sole
caller was already doing that, so this just requires moving the pstrdup
call. This saves a few bytes but mainly it makes the API a lot cleaner.
Back-patch on the off chance that there is some third-party code using
MapArrayTypeName with less-secure input. Pushing pstrdup into the function
should not cause any serious problems for such hypothetical code; at worst
there might be a short term memory leak.
Per Coverity scanning.
Mostly these issues concern the non-use of function results. These
have been changed to use (void) pushJsonbValue(...) instead of assigning
the result to a variable that gets overwritten before it is used.
There is a larger issue that we should possibly examine the API for
pushJsonbValue(), so that instead of returning a value it modifies a
state argument. The current idiom is rather clumsy. However, changing
that requires quite a bit more work, so this change should do for the
moment.
The code for advancing through the input rows overlooked the case that we
might already be past the first row of the row pair now being considered,
in case the previous percentile also fell between the same two input rows.
Report and patch by Andrew Gierth; logic rewritten a bit for clarity by me.
The functions are:
to_jsonb()
jsonb_object()
jsonb_build_object()
jsonb_build_array()
jsonb_agg()
jsonb_object_agg()
Also along the way some better logic is implemented in
json_categorize_type() to match that in the newly implemented
jsonb_categorize_type().
Andrew Dunstan, reviewed by Pavel Stehule and Alvaro Herrera.
The functions remove object fields, including in nested objects, that
have null as a value. In certain cases this can lead to considerably
smaller datums, with no loss of semantic information.
Andrew Dunstan, reviewed by Pavel Stehule.
Ordinarily we can omit checking of a WHERE condition that matches a partial
index's condition, when we are using an indexscan on that partial index.
However, in SELECT FOR UPDATE we must include the "redundant" filter
condition in the plan so that it gets checked properly in an EvalPlanQual
recheck. The planner got this mostly right, but improperly omitted the
filter condition if the index in question was on an inheritance child
table. In READ COMMITTED mode, this could result in incorrectly returning
just-updated rows that no longer satisfy the filter condition.
The cause of the error is using get_parse_rowmark() when get_plan_rowmark()
is what should be used during planning. In 9.3 and up, also fix the same
mistake in contrib/postgres_fdw. It's currently harmless there (for lack
of inheritance support) but wrong is wrong, and the incorrect code might
get copied to someplace where it's more significant.
Report and fix by Kyotaro Horiguchi. Back-patch to all supported branches.
In READ COMMITTED mode, if a SELECT FOR UPDATE discovers it has to redo
WHERE-clause checking on rows that have been updated since the SELECT's
snapshot, it invokes EvalPlanQual processing to do that. If this first
occurs within a non-first child table of an inheritance tree, the previous
coding could accidentally re-return a matching row from an earlier,
already-scanned child table. (And, to add insult to injury, I think this
could make it miss returning a row that should have been returned, if the
updated row that this happens on should still have passed the WHERE qual.)
Per report from Kyotaro Horiguchi; the added isolation test is based on his
test case.
This has been broken for quite awhile, so back-patch to all supported
branches.
Ensure we reindex indexes built on Mat Views.
Based on patch from Micheal Paquier
Add thorough tests to check that indexes on
tables, toast tables and mat views are reindexed.
Simon Riggs
In passing, also make some debugging elog's in pgstat.c a bit more
consistently worded.
Back-patch as far as applicable (9.3 or 9.4; none of these mistakes are
really old).
Mark Dilger identified and patched the type violations; the message
rewordings are mine.
The amount of space to reserve for the value's varlena header is
VARHDRSZ, not sizeof(VARHDRSZ). The latter coding accidentally
failed to fail because of the way the VARHDRSZ macro is currently
defined; but if we ever change it to return size_t (as one might
reasonably expect it to do), convertToJsonb() would have failed.
Spotted by Mark Dilger.
Previously REINDEX DATABASE and REINDEX SCHEMA
produced a stream of NOTICE messages. Removing that
since it is inconsistent for such a command to
produce output without a VERBOSE option.
PostgreSQL on Windows 8 or Windows Server 2012 will now
get high-resolution timestamps by dynamically loading the
GetSystemTimePreciseAsFileTime function. It'll fall back to
to GetSystemTimeAsFileTime if the higher precision variant
isn't found, so the same binaries without problems on older
Windows releases.
No attempt is made to detect the Windows version. Only the
presence or absence of the desired function is considered.
Craig Ringer