Since we now include a sample line for replication on local
connections in pg_hba.conf, don't include it where local
connections aren't available (such as on win32).
Also make sure we use authmethodlocal and not authmethod on
the sample line.
In a couple of places we said "not supported on this platform" for cases
that aren't really platform-specific, but could depend on configuration
options such as --with-openssl. Use "not supported by this build" instead,
as that doesn't convey the impression that you can't fix it without moving
to another OS; that's also more consistent with the wording used for an
identical error case in guc.c.
No back-patch, as the clarity gain is small enough to not be worth
burdening translators with back-branch changes.
Most commenters agreed that this is more friendly than silently failing
to match the line during actual connection attempts. Also, this will
prevent corner cases that might arise when trying to handle such a line
when the SSL code isn't turned on. An example is that specifying
clientcert=1 in such a line would formerly result in a completely
misleading complaint that root.crt wasn't present, as seen in a recent
report from Marc-Andre Laverdiere. While we could have instead fixed
that specific behavior, it seems likely that we'd have a continuing stream
of such bizarre behaviors if we keep on allowing hostssl lines when SSL is
disabled.
Back-patch to 8.4, where clientcert was introduced. Earlier versions don't
have this specific issue, and the code is enough different to make this
patch not applicable without more work than it seems worth.
than on other platforms, and only IPv6 addresses are returned. Because of
those two issues, fall back to ioctl(SIOCGIFCONF) on HP/UX, so that it at
least compiles and finds IPv4 addresses. This function is currently only
used for interpreting samehost/samenet in pg_hba.conf, which isn't that
critical.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
This involves getting the character classification and case-folding
functions in the regex library to use the collations infrastructure.
Most of this work had been done already in connection with the upper/lower
and LIKE logic, so it was a simple matter of transposition.
While at it, split out these functions into a separate source file
regc_pg_locale.c, so that they can be correctly labeled with the Postgres
project's license rather than the Scriptics license. These functions are
100% Postgres-written code whereas what remains in regc_locale.c is still
mostly not ours, so lumping them both under the same copyright notice was
getting more and more misleading.
than replication_timeout (a new GUC) milliseconds. The TCP timeout is often
too long, you want the master to notice a dead connection much sooner.
People complained about that in 9.0 too, but with synchronous replication
it's even more important to notice dead connections promptly.
Fujii Masao and Heikki Linnakangas
The local variable "sock" can be unused depending on compilation flags.
But there seems no particular need for it, since the kernel calls can
just as easily say port->sock instead.
This removes an overloading of two authentication options where
one is very secure (peer) and one is often insecure (ident). Peer
is also the name used in libpq from 9.1 to specify the same type
of authentication.
Also make initdb select peer for local connections when ident is
chosen, and ident for TCP connections when peer is chosen.
ident keyword in pg_hba.conf is still accepted and maps to peer
authentication.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
Corrupt RADIUS responses were treated as errors and not ignored
(which the RFC2865 states they should be). This meant that a
user with unfiltered access to the network of the PostgreSQL
or RADIUS server could send a spoofed RADIUS response
to the PostgreSQL server causing it to reject a valid login,
provided the attacker could also guess (or brute-force) the
correct port number.
Fix is to simply retry the receive in a loop until the timeout
has expired or a valid (signed by the correct RADIUS server)
packet arrives.
Reported by Alan DeKok in bug #5687.
which is perhaps not a terribly good spot for it but there doesn't seem to be
a better place. Also add a source-code comment pointing out a couple reasons
for having a separate lock file. Per suggestion from Greg Smith.
unqualified names.
- Add a missing_ok parameter to get_tablespace_oid.
- Avoid duplicating get_tablespace_od guts in objectNamesToOids.
- Add a missing_ok parameter to get_database_oid.
- Replace get_roleid and get_role_checked with get_role_oid.
- Add get_namespace_oid, get_language_oid, get_am_oid.
- Refactor existing code to use new interfaces.
Thanks to KaiGai Kohei for the review.
requests for client certs. This lets a client with a keystore select the
appropriate client certificate to send. In particular, this is necessary
to get Java clients to work in all but the most trivial configurations.
Per discussion of bug #5468.
Craig Ringer
with database = replication. The previous coding would allow them to match
ordinary records too, but that seems like a recipe for security breaches.
Improve the messages associated with no-such-pg_hba.conf entry to report
replication connections as such, since that's now a critical aspect of
whether the connection matches. Make some cursory improvements in the related
documentation, too.
unless (1) the @ isn't quoted and (2) the filename isn't empty. This guards
against unexpectedly treating usernames or other strings in "flat files"
as inclusion requests, as seen in a recent trouble report from Ed L.
The empty-filename case would be guaranteed to misbehave anyway, because our
subsequent path-munging behavior results in trying to read the directory
containing the current input file.
I think this might finally explain the report at
http://archives.postgresql.org/pgsql-bugs/2004-05/msg00132.php
of a crash after printing "authentication file token too long, skipping",
since I was able to duplicate that message (though not a crash) on a
platform where stdio doesn't refuse to read directories. We never got
far in investigating that problem, but now I'm suspicious that the trigger
condition was an @ in the flat password file.
Back-patch to all active branches since the problem can be demonstrated in all
branches except HEAD. The test case, creating a user named "@", doesn't cause
a problem in HEAD since we got rid of the flat password file. Nonetheless it
seems like a good idea to not consider quoted @ as a file inclusion spec,
so I changed HEAD too.
set ferror() but never set feof(). This is known to be the case for recent
glibc when trying to read a directory as a file, and might be true for other
platforms/cases too. Per report from Ed L. (There is more that we ought to
do about his report, but this is one easily identifiable issue.)
how often we do SSL session key renegotiation. Can be set to
0 to disable renegotiation completely, which is required if
a broken SSL library is used (broken patches to CVE-2009-3555
a known cause) or when using a client library that can't do
renegotiation.
and use this in pq_getbyte_if_available.
It's only a limited implementation which swithes the whole emulation layer
no non-blocking mode, but that's enough as long as non-blocking is only
used during a short period of time, and only one socket is accessed during
this time.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
These files have apparently been edited over the years by a dozen people
with as many different editor settings, which made the alignment of the
paragraphs quite inconsistent and ugly. I made a pass of M-q with Emacs
to straighten it out.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
This silences some warnings on Win64. Not using the proper SOCKET datatype
was actually wrong on Win32 as well, but didn't cause any warnings there.
Also create define PGINVALID_SOCKET to indicate an invalid/non-existing
socket, instead of using a hardcoded -1 value.
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
at least in some Windows versions, these functions are capable of returning
a failure indication without setting errno. That puts us into an infinite
loop if the previous value happened to be EINTR. Per report from Brendan
Hill.
Back-patch to 8.2. We could take it further back, but since this is only
known to be an issue on Windows and we don't support Windows before 8.2,
it does not seem worth the trouble.
does a search for the user in the directory first, and then binds with
the DN found for this user.
This allows for LDAP logins in scenarios where the DN of the user cannot
be determined simply by prefix and suffix, such as the case where different
users are located in different containers.
The old way of authentication can be significantly faster, so it's kept
as an option.
Robert Fleming and Magnus Hagander
attacks where an attacker would put <attack>\0<propername> in the field and
trick the validation code that the certificate was for <attack>.
This is a very low risk attack since it reuqires the attacker to trick the
CA into issuing a certificate with an incorrect field, and the common
PostgreSQL deployments are with private CAs, and not external ones. Also,
default mode in 8.4 does not do any name validation, and is thus also not
vulnerable - but the higher security modes are.
Backpatch all the way. Even though versions 8.3.x and before didn't have
certificate name validation support, they still exposed this field for
the user to perform the validation in the application code, and there
is no way to detect this problem through that API.
Security: CVE-2009-4034
pam_message array contains exactly one PAM_PROMPT_ECHO_OFF message.
Instead, deal with however many messages there are, and don't throw error
for PAM_ERROR_MSG and PAM_TEXT_INFO messages. This logic is borrowed from
openssh 5.2p1, which hopefully has seen more real-world PAM usage than we
have. Per bug #5121 from Ryan Douglas, which turned out to be caused by
the conv_proc being called with zero messages. Apparently that is normal
behavior given the combination of Linux pam_krb5 with MS Active Directory
as the domain controller.
Patch all the way back, since this code has been essentially untouched
since 7.4. (Surprising we've not heard complaints before.)
and SSPI athentication methods. While the old 2000 byte limit was more than
enough for Unix Kerberos implementations, tickets issued by Windows Domain
Controllers can be much larger.
Ian Turner
large number of SIGHUP cycles, these would have run the postmaster out
of memory. Noted while testing memory-leak scenario in postgresql.conf
configuration-change-printing patch.
if salt_len == 0. This seems to be mostly academic, since nearly all calling
code paths guarantee nonempty salt; the only case that doesn't is
PQencryptPassword where the caller could mistakenly pass an empty username.
So, fix it but don't bother backpatching. Per ljb.
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
(That flat file is now completely useless, but removal will come later.)
To do this, postpone client authentication into the startup transaction
that's run by InitPostgres. We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before. The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle. (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)
A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.
Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication. This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead. However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.
encoding conversion of any elog/ereport message being sent to the frontend.
This generalizes a patch that I put in last October, which suppressed
translation of only specific messages known to be associated with recursive
can't-translate-the-message behavior. As shown in bug #4680, we need a more
general answer in order to have some hope of coping with broken encoding
conversion setups. This approach seems a good deal less klugy anyway.
Patch in all supported branches.
to the documented API value. The previous code got it right as
it's implemented, but accepted too much/too little compared to
the API documentation.
Per comment from Zdenek Kotala.
to pass the full username@realm string to the authentication instead of
just the username. This makes it possible to use pg_ident.conf to authenticate
users from multiple realms as different database users.
Magnus Hagander
Peter Eisentraut
Tom Lane
Heikki Linnakangas
Andrew Dunstan
Bruce Momjian
Robert Haas
Simon Riggs
Itagaki Takahiro
Alvaro Herrera