The default behavior for GSS and SSPI authentication methods has long
been to strip the realm off of the principal, however, this is not a
secure approach in multi-realm environments and the use-case for the
parameter at all has been superseded by the regex-based mapping support
available in pg_ident.conf.
Change the default for include_realm to be '1', meaning that we do
NOT remove the realm from the principal by default. Any installations
which depend on the existing behavior will need to update their
configurations (ideally by leaving include_realm set to 1 and adding a
mapping in pg_ident.conf, but alternatively by explicitly setting
include_realm=0 prior to upgrading). Note that the mapping capability
exists in all currently supported versions of PostgreSQL and so this
change can be done today. Barring that, existing users can update their
configurations today to explicitly set include_realm=0 to ensure that
the prior behavior is maintained when they upgrade.
This needs to be noted in the release notes.
Per discussion with Magnus and Peter.
In investigating yesterday's crash report from Hugo Osvaldo Barrera, I only
looked back as far as commit f3aec2c7f5 where the breakage occurred
(which is why I thought the IPv4-in-IPv6 business was undocumented). But
actually the logic dates back to commit 3c9bb8886d and was simply
broken by erroneous refactoring in the later commit. A bit of archives
excavation shows that we added the whole business in response to a report
that some 2003-era Linux kernels would report IPv4 connections as having
IPv4-in-IPv6 addresses. The fact that we've had no complaints since 9.0
seems to be sufficient confirmation that no modern kernels do that, so
let's just rip it all out rather than trying to fix it.
Do this in the back branches too, thus essentially deciding that our
effective behavior since 9.0 is correct. If there are any platforms on
which the kernel reports IPv4-in-IPv6 addresses as such, yesterday's fix
would have made for a subtle and potentially security-sensitive change in
the effective meaning of IPv4 pg_hba.conf entries, which does not seem like
a good thing to do in minor releases. So let's let the post-9.0 behavior
stand, and change the documentation to match it.
In passing, I failed to resist the temptation to wordsmith the description
of pg_hba.conf IPv4 and IPv6 address entries a bit. A lot of this text
hasn't been touched since we were IPv4-only.
The previous coding copied garbage into a local variable, pretty much
ensuring that the intended test of an IPv6 connection address against a
promoted IPv4 address from pg_hba.conf would never match. The lack of
field complaints likely indicates that nobody realized this was supposed
to work, which is unsurprising considering that no user-facing docs suggest
it should work.
In principle this could have led to a SIGSEGV due to reading off the end of
memory, but since the source address would have pointed to somewhere in the
function's stack frame, that's quite unlikely. What led to discovery of
the bug is Hugo Osvaldo Barrera's report of a crash after an OS upgrade,
which is probably because he is now running a system in which memcpy raises
abort() upon detecting overlapping source and destination areas. (You'd
have to additionally suppose some things about the stack frame layout to
arrive at this conclusion, but it seems plausible.)
This has been broken since the code was added, in commit f3aec2c7f5,
so back-patch to all supported branches.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
Code that check the flag no longer need #ifdef's, which is more convenient.
In particular, makes it easier to write extensions that depend on it.
In the passing, modify sslinfo's ssl_is_used function to check ssl_in_use
instead of the OpenSSL specific 'ssl' pointer. It doesn't make any
difference currently, as sslinfo is only compiled when built with OpenSSL,
but seems cleaner anyway.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
According to the Single Unix Spec and assorted man pages, you're supposed
to use the constants named AF_xxx when setting ai_family for a getaddrinfo
call. In a few places we were using PF_xxx instead. Use of PF_xxx
appears to be an ancient BSD convention that was not adopted by later
standardization. On BSD and most later Unixen, it doesn't matter much
because those constants have equivalent values anyway; but nonetheless
this code is not per spec.
In the same vein, replace PF_INET by AF_INET in one socket() call, which
wasn't even consistent with the other socket() call in the same function
let alone the remainder of our code.
Per investigation of a Cygwin trouble report from Marco Atzeri. It's
probably a long shot that this will fix his issue, but it's wrong in
any case.
The code for matching clients to pg_hba.conf lines that specify host names
(instead of IP address ranges) failed to complain if reverse DNS lookup
failed; instead it silently didn't match, so that you might end up getting
a surprising "no pg_hba.conf entry for ..." error, as seen in bug #9518
from Mike Blackwell. Since we don't want to make this a fatal error in
situations where pg_hba.conf contains a mixture of host names and IP
addresses (clients matching one of the numeric entries should not have to
have rDNS data), remember the lookup failure and mention it as DETAIL if
we get to "no pg_hba.conf entry". Apply the same approach to forward-DNS
lookup failures, too, rather than treating them as immediate hard errors.
Along the way, fix a couple of bugs that prevented us from detecting an
rDNS lookup error reliably, and make sure that we make only one rDNS lookup
attempt; formerly, if the lookup attempt failed, the code would try again
for each host name entry in pg_hba.conf. Since more or less the whole
point of this design is to ensure there's only one lookup attempt not one
per entry, the latter point represents a performance bug that seems
sufficient justification for back-patching.
Also, adjust src/port/getaddrinfo.c so that it plays as well as it can
with this code. Which is not all that well, since it does not have actual
support for rDNS lookup, but at least it should return the expected (and
required by spec) error codes so that the main code correctly perceives the
lack of functionality as a lookup failure. It's unlikely that PG is still
being used in production on any machines that require our getaddrinfo.c,
so I'm not excited about working harder than this.
To keep the code in the various branches similar, this includes
back-patching commits c424d0d105 and
1997f34db4 into 9.2 and earlier.
Back-patch to 9.1 where the facility for hostnames in pg_hba.conf was
introduced.
krb5 has been deprecated since 8.3, and the recommended way to do
Kerberos authentication is using the GSSAPI authentication method
(which is still fully supported).
libpq retains the ability to identify krb5 authentication, but only
gives an error message about it being unsupported. Since all authentication
is initiated from the backend, there is no need to keep it at all
in the backend.
Instead of just reporting which user failed to log in, log both the
line number in the active pg_hba.conf file (which may not match reality
in case the file has been edited and not reloaded) and the contents of
the matching line (which will always be correct), to make it easier
to debug incorrect pg_hba.conf files.
The message to the client remains unchanged and does not include this
information, to prevent leaking security sensitive information.
Reviewed by Tom Lane and Dean Rasheed
Similar changes were done to pg_hba.conf earlier already, this commit makes
pg_ident.conf to behave the same as pg_hba.conf.
This has two user-visible effects. First, if pg_ident.conf contains multiple
errors, the whole file is parsed at postmaster startup time and all the
errors are immediately reported. Before this patch, the file was parsed and
the errors were reported only when someone tries to connect using an
authentication method that uses the file, and the parsing stopped on first
error. Second, if you SIGHUP to reload the config files, and the new
pg_ident.conf file contains an error, the error is logged but the old file
stays in effect.
Also, regular expressions in pg_ident.conf are now compiled only once when
the file is loaded, rather than every time the a user is authenticated. That
should speed up authentication if you have a lot of regexps in the file.
Amit Kapila
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
In e5e2fc842c, blank lines were removed
after a comment block, which now looks as though the comment refers to
the immediately following code, but it actually refers to the
preceding code. So put the blank lines back.
An empty HBA file is surely an error, since it means there is no way to
connect to the server. We've not heard identifiable reports of people
actually doing that, but this will also close off the case Thom Brown just
complained of, namely pointing hba_file at a directory. (On at least some
platforms with some directories, it will read as an empty file.)
Perhaps this should be back-patched, but given the lack of previous
complaints, I won't add extra work for the translators.
The previous coding was ugly, as it marked special tokens as such in the
wrong stage, relying on workarounds to figure out if they had been
quoted in the original or not. This made it impossible to have specific
keywords be recognized as such only in certain positions in HBA lines,
for example. Fix by restructuring the parser code so that it remembers
whether tokens were quoted or not. This eliminates widespread knowledge
of possible known keywords for all fields.
Also improve memory management in this area, to use memory contexts that
are reset as a whole instead of using retail pfrees; this removes a
whole lotta crufty (and probably slow) code.
Instead of calling strlen() three times in next_field_expand on the
returned token to find out whether there was a comma (and strip it),
pass back the info directly from the callee, which is simpler.
In passing, update historical artifacts in hba.c API.
Authors: Brendan Jurd, Alvaro Herrera
Reviewed by Pavel Stehule
In a couple of places we said "not supported on this platform" for cases
that aren't really platform-specific, but could depend on configuration
options such as --with-openssl. Use "not supported by this build" instead,
as that doesn't convey the impression that you can't fix it without moving
to another OS; that's also more consistent with the wording used for an
identical error case in guc.c.
No back-patch, as the clarity gain is small enough to not be worth
burdening translators with back-branch changes.
Most commenters agreed that this is more friendly than silently failing
to match the line during actual connection attempts. Also, this will
prevent corner cases that might arise when trying to handle such a line
when the SSL code isn't turned on. An example is that specifying
clientcert=1 in such a line would formerly result in a completely
misleading complaint that root.crt wasn't present, as seen in a recent
report from Marc-Andre Laverdiere. While we could have instead fixed
that specific behavior, it seems likely that we'd have a continuing stream
of such bizarre behaviors if we keep on allowing hostssl lines when SSL is
disabled.
Back-patch to 8.4, where clientcert was introduced. Earlier versions don't
have this specific issue, and the code is enough different to make this
patch not applicable without more work than it seems worth.
This involves getting the character classification and case-folding
functions in the regex library to use the collations infrastructure.
Most of this work had been done already in connection with the upper/lower
and LIKE logic, so it was a simple matter of transposition.
While at it, split out these functions into a separate source file
regc_pg_locale.c, so that they can be correctly labeled with the Postgres
project's license rather than the Scriptics license. These functions are
100% Postgres-written code whereas what remains in regc_locale.c is still
mostly not ours, so lumping them both under the same copyright notice was
getting more and more misleading.
This removes an overloading of two authentication options where
one is very secure (peer) and one is often insecure (ident). Peer
is also the name used in libpq from 9.1 to specify the same type
of authentication.
Also make initdb select peer for local connections when ident is
chosen, and ident for TCP connections when peer is chosen.
ident keyword in pg_hba.conf is still accepted and maps to peer
authentication.
unqualified names.
- Add a missing_ok parameter to get_tablespace_oid.
- Avoid duplicating get_tablespace_od guts in objectNamesToOids.
- Add a missing_ok parameter to get_database_oid.
- Replace get_roleid and get_role_checked with get_role_oid.
- Add get_namespace_oid, get_language_oid, get_am_oid.
- Refactor existing code to use new interfaces.
Thanks to KaiGai Kohei for the review.
Bruce Momjian
Stephen Frost
Tom Lane
Alvaro Herrera
Heikki Linnakangas
Magnus Hagander
Noah Misch
Peter Eisentraut
Andrew Dunstan
Robert Haas