Previously, PQhost didn't return the connected host details when the
connection type was CHT_HOST_ADDRESS (i.e., via hostaddr). Instead, it
returned the complete host connection parameter (which could contain
multiple hosts) or the default host details, which was confusing and
arguably incorrect.
Change this to return the actually connected host or hostaddr
irrespective of the connection type. When hostaddr but no host was
specified, hostaddr is now returned. Never return the original host
connection parameter, and document that PQhost cannot be relied on
before the connection is established.
PQport is similarly changed to always return the active connection port
and never the original connection parameter.
Author: Hari Babu <kommi.haribabu@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
Since e3bdb2d926, libpq failed to build on
some platforms because they did not have SSL_clear_options(). Although
mainline OpenSSL introduced SSL_clear_options() after
SSL_OP_NO_COMPRESSION, so the code should have built fine, at least an
old NetBSD version (build farm "coypu" NetBSD 5.1 gcc 4.1.3 PR-20080704
powerpc) has SSL_OP_NO_COMPRESSION but no SSL_clear_options().
So add a configure check for SSL_clear_options(). If we don't find it,
skip the call. That means on such a platform one cannot *enable* SSL
compression if the built-in default is off, but that seems an unlikely
combination anyway and not very interesting in practice.
Since SSL compression is no longer recommended, turn the default in
libpq from on to off.
OpenSSL 1.1.0 and many distribution packages already turn compression
off by default, so such a server won't accept compression anyway. So
this will mainly affect users of older OpenSSL installations.
Also update the documentation to make clear that this setting is no
longer recommended.
Discussion: https://www.postgresql.org/message-id/flat/595cf3b1-4ffe-7f05-6f72-f72b7afa7993%402ndquadrant.com
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
In some cases Oracle Pro*C handles char array differently than ECPG. This patch
adds a Oracle compatibility mode to make ECPG behave like Pro*C.
Patch by David Rader <davidr@openscg.com>
Several places used similar code to convert a string to an int, so take
the function that we already had and make it globally available.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
A Value node would store an integer as a long. This causes needless
portability risks, as long can be of varying sizes. Change it to use
int instead. All code using this was already careful to only store
32-bit values anyway.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Rationalize a couple of macro names:
* In catalog/pg_init_privs.h, rename Anum_pg_init_privs_privs to
Anum_pg_init_privs_initprivs to match the column's actual name.
* In ecpg, rename ZPBITOID to BITOID to match catalog/pg_type.h.
This reduces reader confusion, and will allow us to generate these
macros automatically in future.
In catalog/pg_tablespace.h, fix the ordering of related DATA and
#define lines to agree with how it's done elsewhere. This has no
impact today, but simplifies life for the bootstrap data conversion
scripts.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGXnLH=BSo0x-aA818f=MyQqGS5nM-GDCWAMdnvQJTRC1A@mail.gmail.com
Separate the parts specific to the SSL library from the general logic.
The previous code structure was
open_client_SSL()
calls verify_peer_name_matches_certificate()
calls verify_peer_name_matches_certificate_name()
calls wildcard_certificate_match()
and was completely in fe-secure-openssl.c. The new structure is
open_client_SSL() [openssl]
calls pq_verify_peer_name_matches_certificate() [generic]
calls pgtls_verify_peer_name_matches_certificate_guts() [openssl]
calls openssl_verify_peer_name_matches_certificate_name() [openssl]
calls pq_verify_peer_name_matches_certificate_name() [generic]
calls wildcard_certificate_match() [generic]
Move the generic functions into a new file fe-secure-common.c, so the
calls generally go fe-connect.c -> fe-secure.c -> fe-secure-${impl}.c ->
fe-secure-common.c, although there is a bit of back-and-forth between
the last two.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
pg_hba_file_rules erroneously reported this as scram-sha256. Fix that.
To avoid future errors and confusion, also adjust documentation links
and internal symbols to have a separator between "sha" and "256".
Reported-by: Christophe Courtois <christophe.courtois@dalibo.com>
Author: Michael Paquier <michael.paquier@gmail.com>
Some things in be-secure-openssl.c and fe-secure-openssl.c were not
actually specific to OpenSSL but could also be used by other
implementations. In order to avoid copy-and-pasting, move some of that
code to common files.
Move the documentation of the SSL API calls are supposed to do into the
headers files, instead of keeping them in the files for the OpenSSL
implementation. That way, they don't have to be duplicated or be
inconsistent when other implementations are added.
It seems we can't easily work around the lack of
X509_get_signature_nid(), so revert the previous attempts and just
disable the tls-server-end-point feature if we don't have it.
This adds a second standard channel binding type for SCRAM. It is
mainly intended for third-party clients that cannot implement
tls-unique, for example JDBC.
Author: Michael Paquier <michael.paquier@gmail.com>
As things stand now, channel binding data is fetched from OpenSSL and
saved into the SCRAM exchange context for any SSL connection attempted
for a SCRAM authentication, resulting in data fetched but not used if no
channel binding is used or if a different channel binding type is used
than what the data is here for.
Refactor the code in such a way that binding data is fetched from the
SSL stack only when a specific channel binding is used for both the
frontend and the backend. In order to achieve that, save the libpq
connection context directly in the SCRAM exchange state, and add a
dependency to SSL in the low-level SCRAM routines.
This makes the interface in charge of initializing the SCRAM context
cleaner as all its data comes from either PGconn* (for frontend) or
Port* (for the backend).
Author: Michael Paquier <michael.paquier@gmail.com>
This parameter can be used to enforce the channel binding type used
during a SCRAM authentication. This can be useful to check code paths
where an invalid channel binding type is used by a client and will be
even more useful to allow testing other channel binding types when they
are added.
The default value is tls-unique, which is what RFC 5802 specifies.
Clients can optionally specify an empty value, which has as effect to
not use channel binding and use SCRAM-SHA-256 as chosen SASL mechanism.
More tests for SCRAM and channel binding are added to the SSL test
suite.
Author: Author: Michael Paquier <michael.paquier@gmail.com>
Mechanism names for SCRAM and channel binding names have been included
in scram.h by the libpq frontend code, and this header references a set
of routines which are only used by the backend. scram-common.h is on
the contrary usable by both the backend and libpq, so getting those
names from there seems more reasonable.
Author: Michael Paquier <michael.paquier@gmail.com>
We need to check whether the channel-binding flag encoded in the
client-final-message is the same one sent in the client-first-message.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
This is the basic feature set using OpenSSL to support the feature. In
order to allow the frontend and the backend to fetch the sent and
expected TLS Finished messages, a PG-like API is added to be able to
make the interface pluggable for other SSL implementations.
This commit also adds a infrastructure to facilitate the addition of
future channel binding types as well as libpq parameters to control the
SASL mechanism names and channel binding names. Those will be added by
upcoming commits.
Some tests are added to the SSL test suite to test SCRAM authentication
with channel binding.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
This suite had been a proper superset of the regular ecpg test suite,
but the three newest tests didn't reach it. To make this less likely to
recur, delete the extra schedule file and pass the TCP-specific test on
the command line. Back-patch to 9.3 (all supported versions).
Since commit 868898739a, it has assumed
"localhost" resolves to both ::1 and 127.0.0.1. We gain nothing from
that assumption, and it does not hold in a default installation of Red
Hat Enterprise Linux 5. Back-patch to 9.3 (all supported versions).
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
isdigit(), isspace(), etc are likely to give surprising results if passed a
signed char. We should always cast the argument to unsigned char to avoid
that. Error in commit 63d6b97fd, found by buildfarm member gaur.
Back-patch to 9.3, like that commit.
Makefile.global assigns this prerequisite to every target named "check",
but similar targets must mention it explicitly. Affected targets
failed, tested $PATH binaries, or tested a stale temporary installation.
The src/test/modules examples worked properly when called as "make -C
src/test/modules/$FOO check", but "make -j" allowed the test to start
before the temporary installation was in place. Back-patch to 9.5,
where commit dcae5facca introduced the
shared temp-install.
Remove useless or inconsistently used return values from functions,
matching backend changes 99bf328237 and
791359fe0e.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Some people like to run libpq-using applications in environments where
there's no home directory. We've broken that scenario before (cf commits
5b4067798 and bd58d9d88), and commit ba005f193 broke it again, by making
it a hard error if we fail to get the home directory name while looking
for ~/.pgpass. The previous precedent is that if we can't get the home
directory name, we should just silently act as though the file we hoped
to find there doesn't exist. Rearrange the new code to honor that.
Looking around, the service-file code added by commit 41a4e4595 had the
same disease. Apparently, that escaped notice because it only runs when
a service name has been specified, which I guess the people who use this
scenario don't do. Nonetheless, it's wrong too, so fix that case as well.
Add a comment about this policy to pqGetHomeDirectory, in the probably
vain hope of forestalling the same error in future. And upgrade the
rather miserable commenting in parseServiceInfo, too.
In passing, also back off parseServiceInfo's assumption that only ENOENT
is an ignorable error from stat() when checking a service file. We would
need to ignore at least ENOTDIR as well (cf 5b4067798), and seeing that
the far-better-tested code for ~/.pgpass treats all stat() failures alike,
I think this code ought to as well.
Per bug #14872 from Dan Watson. Back-patch the .pgpass change to v10
where ba005f193 came in. The service-file bugs are far older, so
back-patch the other changes to all supported branches.
Discussion: https://postgr.es/m/20171025200457.1471.34504@wrigleys.postgresql.org
Flex generates a lot of functions that are not actually used. In order
to avoid coverage figures being ruined by that, mark up the part of the
.l files where the generated code appears by lcov exclusion markers.
That way, lcov will typically only reported on coverage for the .l file,
which is under our control, but not for the .c file.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
All postgres internal usages are replaced, it's just libpq example
usages that haven't been converted. External users of libpq can't
generally rely on including postgres internal headers.
Note that this includes replacing open-coded byte swapping of 64bit
integers (using two 32 bit swaps) with a single 64bit swap.
Where it looked applicable, I have removed netinet/in.h and
arpa/inet.h usage, which previously provided the relevant
functionality. It's perfectly possible that I missed other reasons for
including those, the buildfarm will tell.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de