If a seqscan encounters many consecutive pages containing only dead tuples,
it can remain in the loop in heapgettup for a long time, and there was no
CHECK_FOR_INTERRUPTS anywhere in that loop. This meant there were
real-world situations where a query would be effectively uncancelable for
long stretches. Add a check placed to occur once per page, which should be
enough to provide reasonable response time without adding any measurable
overhead.
Report and patch by Merlin Moncure (though I tweaked it a bit).
Back-patch to all supported branches.
If the amount of freespace on page was less than the amount reserved by
fillfactor, the calculation would underflow.
This fixes bug #6643 reported by Tomonari Katsumata.
At the time we check whether the tuple is dead to all running
transactions, we've already verified that it isn't visible to our
scan, setting hint bits if appropriate. So there's no need to
recheck CLOG for the all-dead test we do just a moment later.
So, add HeapTupleIsSurelyDead() to test the appropriate condition
under the assumption that all relevant hit bits are already set.
Review by Tom Lane.
The alternative of disallowing index-only scans in HS operation was
discussed, but the consensus was that it was better to treat marking
a page all-visible as a recovery conflict for snapshots that could still
fail to see XIDs on that page. We may in the future try to soften this,
so that we simply force index scans to do heap fetches in cases where
this may be an issue, rather than throwing a hard conflict.
It used to be case that lazy vacuum could call this function with only
a shared lock on the buffer, but neither lazy vacuum nor any other
code path does that any more. Simplify the code accordingly and clean
up some related, obsolete comments.
If tuples were toasted, heap_multi_insert didn't update the ctid on the
original tuples. This caused a failure if there was an after trigger
(including a foreign key), on the table, and a tuple got toasted.
Per off-list report and test case from Ted Phelps
In the previous coding, callers were faced with an awkward choice:
look up the name, do permissions checks, and then lock the table; or
look up the name, lock the table, and then do permissions checks.
The first choice was wrong because the results of the name lookup
and permissions checks might be out-of-date by the time the table
lock was acquired, while the second allowed a user with no privileges
to interfere with access to a table by users who do have privileges
(e.g. if a malicious backend queues up for an AccessExclusiveLock on
a table on which AccessShareLock is already held, further attempts
to access the table will be blocked until the AccessExclusiveLock
is obtained and the malicious backend's transaction rolls back).
To fix, allow callers of RangeVarGetRelid() to pass a callback which
gets executed after performing the name lookup but before acquiring
the relation lock. If the name lookup is retried (because
invalidation messages are received), the callback will be re-executed
as well, so we get the best of both worlds. RangeVarGetRelid() is
renamed to RangeVarGetRelidExtended(); callers not wishing to supply
a callback can continue to invoke it as RangeVarGetRelid(), which is
now a macro. Since the only one caller that uses nowait = true now
passes a callback anyway, the RangeVarGetRelid() macro defaults nowait
as well. The callback can also be used for supplemental locking - for
example, REINDEX INDEX needs to acquire the table lock before the index
lock to reduce deadlock possibilities.
There's a lot more work to be done here to fix all the cases where this
can be a problem, but this commit provides the general infrastructure
and fixes the following specific cases: REINDEX INDEX, REINDEX TABLE,
LOCK TABLE, and and DROP TABLE/INDEX/SEQUENCE/VIEW/FOREIGN TABLE.
Per discussion with Noah Misch and Alvaro Herrera.
Forgot to call RestoreBkpBlocks() in the redo-function, as pointed out by
Simon Riggs. In redo of a regular heap insert, it's taken care of in
heap_redo(), but this new record type uses the heap2 RM, and heap2_redo()
does not take care of that for you.
Also, failed to reset the vmbuffer and all_visibile_cleared local variables
after switching to a new buffer.
This greatly reduces the WAL volume, especially when the table is narrow.
The overhead of locking the heap page is also reduced. Reduced WAL traffic
also makes it scale a lot better, if you run multiple COPY processes at
the same time.
In a regular VACUUM, it's OK to skip pages for which a cleanup lock
isn't immediately available; the next VACUUM will deal with them. If
we're scanning the entire relation to advance relfrozenxid, we might
need to wait, but only if there are tuples on the page that actually
require freezing. These changes should greatly reduce the incidence
of of vacuum processes getting "stuck".
Simon Riggs and Robert Haas
As observed by Heikki, we need not conflict on heap page locks during an
insert; heap page locks are only aggregated tuple locks, they don't imply
locking "gaps" as index page locks do. So we can avoid some unnecessary
conflicts, and also do the SSI check while not holding exclusive lock on
the target buffer.
Kevin Grittner, reviewed by Jeff Davis. Back-patch to 9.1.
This requires adjusting the API for syscache callback functions: they now
get a hash value, not a TID, to identify the target tuple. Most of them
weren't paying any attention to that argument anyway, but plancache did
require a small amount of fixing.
Also, improve performance a trifle by avoiding sending duplicate inval
messages when a heap_update isn't changing the catcache lookup columns.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
more consistent that way, since all the other PredicateLock* calls are
made in various heapam.c and index AM functions. The call in nodeSeqscan.c
was unnecessarily aggressive anyway, there's no need to try to lock the
relation every time a tuple is fetched, it's enough to do it once.
This has the user-visible effect that if a seq scan is initialized in the
executor, but never executed, we now acquire the predicate lock on the heap
relation anyway. We could avoid that by taking the lock on the first
heap_getnext() call instead, but it doesn't seem worth the trouble given
that it feels more natural to do it in heap_beginscan().
Also, remove the retail PredicateLockTuple() calls from heap_getnext(). In
a seqscan, started with heap_begin(), we're holding a whole-relation
predicate lock on the heap so there's no need to lock the tuples
individually.
Kevin Grittner and me
Since the names try_relation_openrv() and try_heap_openrv() don't seem
quite appropriate, rename the functions to relation_openrv_extended()
and heap_openrv_extended(). This is also more general, if we have a
future need for additional parameters that are of interest to only a
few callers.
This is infrastructure for a forthcoming patch to allow
get_object_address() to take a missing_ok argument as well.
Patch by me, review by Noah Misch.
It's been like this since HOT was originally introduced, but the logic
is complex enough that this is a recipe for bugs, as we've already
found out with SSI. So refactor heap_hot_search_buffer() so that it
can satisfy the needs of index_getnext(), and make index_getnext() use
that rather than duplicating the logic.
This change was originally proposed by Heikki Linnakangas as part of a
larger refactoring oriented towards allowing index-only scans. I
extracted and adjusted this part, since it seems to have independent
merit. Review by Jeff Davis.
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
snapshots, like in REINDEX, are basically non-transactional operations. The
DDL operation itself might participate in SSI, but there's separate
functions for that.
Kevin Grittner and Dan Ports, with some changes by me.
On further analysis, it turns out that it is not needed to duplicate predicate
locks to the new row version at update, the lock on the version that the
transaction saw as visible is enough. However, there was a different bug in
the code that checks for dangerous structures when a new rw-conflict happens.
Fix that bug, and remove all the row-version chaining related code.
Kevin Grittner & Dan Ports, with some comment editorialization by me.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
Hot Standby conflicts only with tuples that were visible at
some point. So ignore tuples from aborted transactions or for
tuples updated/deleted during the inserting transaction when
generating the conflict transaction ids.
Following detailed analysis and test case by Noah Misch.
Original report covered btree delete records, correctly observed
by Heikki Linnakangas that this applies to other cases also.
Fix covers all sources of cleanup records via common code.
transaction snapshots, i.e. a snapshot registered at the beginning of
a transaction. Change variable naming and comments to reflect this reality
in preparation for a future, truly serializable mode, e.g.
Serializable Snapshot Isolation (SSI).
For the moment transaction snapshots are still used to implement
SERIALIZABLE, but hopefully not for too much longer. Patch by Kevin
Grittner and Dan Ports with review and some minor wording changes by me.
If a zeroed page is present in the heap, ALTER TABLE .. SET TABLESPACE will
set the LSN and TLI while copying it, which is wrong, and heap_xlog_newpage()
will do the same thing during replay, so the corruption propagates to any
standby. Note, however, that the bug can't be demonstrated unless archiving
is enabled, since in that case we skip WAL logging altogether, and the LSN/TLI
are not set.
Back-patch to 8.0; prior releases do not have tablespaces.
Analysis and patch by Jeff Davis. Adjustments for back-branches and minor
wordsmithing by me.
field of the WAL record. The previous coding always wrote to the main fork,
resulting in data corruption if the page was meant to go into a non-default
fork.
At present, the only operation that can produce such WAL records is
ALTER TABLE/INDEX SET TABLESPACE when executed with archive_mode = on.
Data corruption would be observed on standby slaves, and could occur on the
master as well if a database crash and recovery occurred after committing
the ALTER and before the next checkpoint. Per report from Gordon Shannon.
Back-patch to 8.4; the problem doesn't exist in earlier branches because
we didn't have a concept of multiple relation forks then.
come from the realistion that HEAP2_CLEAN records don't
always remove user visible data, so conflict processing for
them can be skipped. Confirm validity using Assert checks,
clarify circumstances under which we log heap_cleanup_info
records. Tuning arises from bug fixing of earlier safety
check failures.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
heap_sync() to the callers, because heap_sync() is sometimes called even
if the operation itself is WAL-logged. This eliminates the bogus unlogged
records from CLUSTER that Simon Riggs reported, patch by Fujii Masao.
records for heap and btree. Minor change, mostly API changes to
pass through the required values. This is a simple change though
also provides the refactoring required for further enhancements
to conflict processing using the relOid. Changes only have effect
during Hot Standby.
that would've been WAL-logged if archiving was enabled. If we encounter
such records in archive recovery anyway, we know that some data is
missing from the log. A WARNING is emitted in that case.
Original patch by Fujii Masao, with changes by me.
of this are to centralise the conflict code to allow further change,
as well as to allow passing through the full reason for the conflict
through to the conflicting backends. Backend state alters how we
can handle different types of conflict so this is now required.
As originally suggested by Heikki, no longer optional.
Previously, fastgetattr() and heap_getattr() tested their fourth argument
against a null pointer, but any attempt to use them with a literal-NULL
fourth argument evaluated to *(void *)0, resulting in a compiler error.
Remove these NULL tests to avoid leading future readers of this code to
believe that this has a chance of working. Also clean up related legacy
code in nocachegetattr(), heap_getsysattr(), and nocache_index_getattr().
The new coding standard is that any code which calls a getattr-type
function or macro which takes an isnull argument MUST pass a valid
boolean pointer. Per discussion with Bruce Momjian, Tom Lane, Alvaro
Herrera.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
"all tuples visible" flag in heap page headers. The flag update *must*
be applied before calling XLogInsert, but heap_update and the tuple
moving routines in VACUUM FULL were ignoring this rule. A crash and
replay could therefore leave the flag incorrectly set, causing rows
to appear visible in seqscans when they should not be. This might explain
recent reports of data corruption from Jeff Ross and others.
In passing, do a bit of editorialization on comments in visibilitymap.c.
node starts from the same place as the first scan did. This avoids surprising
behavior of scrollable and WITH HOLD cursors, as seen in Mark Kirkwood's bug
report of yesterday.
It's not entirely clear whether a rescan should be forced to drop out of the
syncscan mode, but for the moment I left the code behaving the same on that
point. Any change there would only be a performance and not a correctness
issue, anyway.
Back-patch to 8.3, since the unstable behavior was created by the syncscan
patch.
errors when tables are concurrently dropped. To do this we must take lock
on each relation before we check its privileges. The old code was trying
to do that the other way around, which is a bit pointless when there are lots
of other commands that lock relations before checking privileges. I did keep
it checking each relation's privilege before locking the next relation, which
is a detail that ALTER TABLE isn't too picky about.
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
the other major heapam.c functions. The only known consequence of this
omission is that UPDATE RETURNING failed to return the correct value for
"tableoid", as per report from KaiGai Kohei.
Back-patch to 8.2. Arguably it's wrong all the way back; but without
evidence of visible breakage before RETURNING was added, I'll desist from
patching the older branches.
heap page, where a set bit indicates that all tuples on the page are
visible to all transactions, and the page therefore doesn't need
vacuuming. It is stored in a new relation fork.
Lazy vacuum uses the visibility map to skip pages that don't need
vacuuming. Vacuum is also responsible for setting the bits in the map.
In the future, this can hopefully be used to implement index-only-scans,
but we can't currently guarantee that the visibility map is always 100%
up-to-date.
In addition to the visibility map, there's a new PD_ALL_VISIBLE flag on
each heap page, also indicating that all tuples on the page are visible to
all transactions. It's important that this flag is kept up-to-date. It
is also used to skip visibility tests in sequential scans, which gives a
small performance gain on seqscans.
truncations in FSM code, call FreeSpaceMapTruncateRel from smgr_redo. To
make that cleaner from modularity point of view, move the WAL-logging one
level up to RelationTruncate, and move RelationTruncate and all the
related WAL-logging to new src/backend/catalog/storage.c file. Introduce
new RelationCreateStorage and RelationDropStorage functions that are used
instead of calling smgrcreate/smgrscheduleunlink directly. Move the
pending rel deletion stuff from smgrcreate/smgrscheduleunlink to the new
functions. This leaves smgr.c as a thin wrapper around md.c; all the
transactional stuff is now in storage.c.
This will make it easier to add new forks with similar truncation logic,
like the visibility map.
(but not locked, as that would risk deadlocks). Also, make it work in a small
ring of buffers to avoid having bulk inserts trash the whole buffer arena.
Robert Haas, after an idea of Simon Riggs'.
on non-full-page-image WAL records, and quite arbitrarily, only if there's
less than 20% free space on the page after the insert/update (not on HOT
updates, though). The 20% cutoff should avoid most of the overhead, when
replaying a bulk insertion, for example, while ensuring that pages that
are full are marked as full in the FSM.
This is mostly to avoid the nasty worst case scenario, where you replay
from a PITR archive, and the FSM information in the base backup is really
out of date. If there was a lot of pages that the outdated FSM claims to
have free space, but don't actually have any, the first unlucky inserter
after the recovery would traverse through all those pages, just to find
out that they're full. We didn't have this problem with the old FSM
implementation, because we simply threw the FSM information away on a
non-clean shutdown.
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
of referencing a WITH item that's not yet in scope according to the SQL
spec's semantics. This seems to be an easy error to make, and the bare
"relation doesn't exist" message doesn't lead one's mind in the correct
direction to fix it.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
GetOldestXmin() instead of RecentGlobalXmin; this is safer because we do not
depend on the latter being correctly set elsewhere, and while it is more
expensive, this code path is not performance-critical. This is a real
risk for autovacuum, because it can execute whole cycles without doing
a single vacuum, which would mean that RecentGlobalXmin would stay at its
initialization value, FirstNormalTransactionId, causing a bogus value to be
inserted in pg_database. This bug could explain some recent reports of
failure to truncate pg_clog.
At the same time, change the initialization of RecentGlobalXmin to
InvalidTransactionId, and ensure that it's set to something else whenever
it's going to be used. Using it as FirstNormalTransactionId in HOT page
pruning could incur in data loss. InitPostgres takes care of setting it
to a valid value, but the extra checks are there to prevent "special"
backends from behaving in unusual ways.
Per Tom Lane's detailed problem dissection in 29544.1221061979@sss.pgh.pa.us
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
SizeOfPageHeaderData instead of sizeof(PageHeaderData) in places where that
makes the code clearer, and avoid casting between Page and PageHeader where
possible. Zdenek Kotala, with some additional cleanup by Heikki Linnakangas.
I did not apply the parts of the proposed patch that would have resulted in
slightly changing the on-disk format of hash indexes; it seems to me that's
not a win as long as there's any chance of having in-place upgrade for 8.4.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
more logical that way, and also it reduces the amount of unnecessary includes
in bufpage.h, which is widely used.
Zdenek Kotala.
My previous patch to bufpage.h should also have credited him as author, but I
forgot (sorry about that).
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
it accumulates the set of changes to be made and then applies them. It had
to accumulate the set of changes anyway to prepare a WAL record for the
pruning action, so this isn't an enormous change; the only new complexity is
to not doubly mark tuples that are visited twice in the scan. The main
advantage is that we can substantially reduce the scope of the critical
section in which the changes are applied, thus avoiding PANIC in foreseeable
cases like running out of memory in inval.c. A nice secondary advantage is
that it is now far clearer that WAL replay will actually do the same thing
that the original pruning did.
This commit doesn't do anything about the open problem that
CacheInvalidateHeapTuple doesn't have the right semantics for a CTID change
caused by collapsing out a redirect pointer. But whatever we do about that,
it'll be a good idea to not do it inside a critical section.
temporary table; we can't support that because there's no way to clean up the
source backend's internal state if the eventual COMMIT PREPARED is done by
another backend. This was checked correctly in 8.1 but I broke it in 8.2 :-(.
Patch by Heikki Linnakangas, original trouble report by John Smith.
its second pass over the table. It has to start at block zero, else the
"merge join" logic for detecting which TIDs are already in the index
doesn't work. Hence, extend heapam.c's API so that callers can enable or
disable syncscan. (I put in an option to disable buffer access strategy,
too, just in case somebody needs it.) Per report from Hannes Dorbath.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
when relkind = RELKIND_RELATION. This syncs these tests with the Asserts
in tuptoaster.c, and ensures that we won't ever try to, for example,
compress a sequence's tuple. Problem found by Greg Stark while stress-testing
with much-smaller-than-normal page sizes.
unpruned XMAX in its header. At the cost of 4 bytes per page, this keeps us
from performing heap_page_prune when there's no chance of pruning anything.
Seems to be necessary per Heikki's preliminary performance testing.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
no need for serialization against snapshot-taking because the xact doesn't
affect anyone else's snapshot anyway. Per discussion. Also, move various
info about the interlocking of transactions and snapshots out of code comments
and into a hopefully-more-cohesive discussion in access/transam/README.
Also, remove a couple of now-obsolete comments about having to force some WAL
to be written to persuade RecordTransactionCommit to do its thing.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
that still thought they could set HEAP_XMAX_COMMITTED immediately after
seeing the other transaction commit. Make them use the same logic as
tqual.c does to determine if the hint bit can be set yet.
pseudo HeapScanDesc created for a bitmap heap scan. This avoids some useless
overhead during a bitmap scan startup, in particular invoking the syncscan
code. (We might someday want to do that, but right now it's merely useless
contention for shared memory, to say nothing of possibly pushing useful
entries out of syncscan's small LRU list.) This also allows elimination of
ugly pgstat_discount_heap_scan() kluge.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
Simon Riggs
Tom Lane
Heikki Linnakangas
Robert Haas
Bruce Momjian
Magnus Hagander
Joe Conway
Alvaro Herrera
Peter Eisentraut