Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
libpgcommon is a new static library to allow sharing code among the
various frontend programs and backend; this lets us eliminate duplicate
implementations of common routines. We avoid libpgport, because that's
intended as a place for porting issues; per discussion, it seems better
to keep them separate.
The first use case, and the only implemented by this patch, is pg_malloc
and friends, which many frontend programs were already using.
At the same time, we can use this to provide palloc emulation functions
for the frontend; this way, some palloc-using files in the backend can
also be used by the frontend cleanly. To do this, we change palloc() in
the backend to be a function instead of a macro on top of
MemoryContextAlloc(). This was previously believed to cause loss of
performance, but this implementation has been tweaked by Tom and Andres
so that on modern compilers it provides a slight improvement over the
previous one.
This lets us clean up some places that were already with
localized hacks.
Most of the pg_malloc/palloc changes in this patch were authored by
Andres Freund. Zoltán Böszörményi also independently provided a form of
that. libpgcommon infrastructure was authored by Álvaro.
The reason this wasn't supported before was that GiST indexes need an
increasing sequence to detect concurrent page-splits. In a regular WAL-
logged GiST index, the LSN of the page-split record is used for that
purpose, and in a temporary index, we can get away with a backend-local
counter. Neither of those methods works for an unlogged relation.
To provide such an increasing sequence of numbers, create a "fake LSN"
counter that is saved and restored across shutdowns. On recovery, unlogged
relations are blown away, so the counter doesn't need to survive that
either.
Jeevan Chalke, based on discussions with Robert Haas, Tom Lane and me.
This isn't used for anything but a sanity check at the moment, but it could
be highly valuable for debugging purposes. It could also be used to recreate
timeline history by traversing WAL, which seems useful.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
This allows recovery to notice certain incorrect recovery scenarios.
If a server has recovered to point X on timeline 5, and you restart
recovery, it better be on timeline 5 when it reaches point X again, not on
some timeline with a higher ID. This can happen e.g if you a standby server
is shut down, a new timeline appears in the WAL archive, and the standby
server is restarted. It will try to follow the new timeline, which is wrong
because some WAL on the old timeline was already replayed before shutdown.
Requires an initdb (or at least pg_resetxlog), because this adds a field to
the control file.
Since we've already chdir'd into the data directory, the file should
be referenced as just "postmaster.pid", without prefixing the directory
path. This is harmless in the normal case where an absolute PGDATA path
is used, but quite dangerous if a relative path is specified, since the
program might then fail to notice an active postmaster.
Reported by Hari Babu. This got broken in my commit
eb5949d190, so patch all active versions.
The xlogid + segno representation of a particular WAL segment doesn't make
much sense in pg_resetxlog anymore, now that we don't use that anywhere
else. Use the WAL filename instead, since that's a convenient way to name a
particular WAL segment.
I did this partially for pg_resetxlog in the original xlogid/segno -> uint64
patch, but I neglected pg_upgrade and the docs. This should now be more
complete.
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
This saves a few bytes of WAL space, but the real motivation is to make it
predictable how much WAL space a record requires, as it no longer depends
on whether we need to waste the last few bytes at end of WAL page because
the header doesn't fit.
The total length field of WAL record, xl_tot_len, is moved to the beginning
of the WAL record header, so that it is still always found on the first page
where a WAL record begins.
Bump WAL version number again as this is an incompatible change.
The comments claimed that wasting the last segment made it easier to do
calculations with XLogRecPtrs, because you don't have problems representing
last-byte-position-plus-1 that way. In my experience, however, it only made
things more complicated, because the there was two ways to represent the
boundary at the beginning of a logical log file: logid = n+1 and xrecoff = 0,
or as xlogid = n and xrecoff = 4GB - XLOG_SEG_SIZE. Some functions were
picky about which representation was used.
Also, use a 64-bit segment number instead of the log/seg combination, to
point to a certain WAL segment. We assume that all platforms have a working
64-bit integer type nowadays.
This is an incompatible change in WAL format, so bumping WAL version number.
Before, some places didn't document the short options (-? and -V),
some documented both, some documented nothing, and they were listed in
various orders. Now this is hopefully more consistent and complete.
This makes it much more convenient to build tools for Postgres that are
separately compiled and require a matching CRC implementation.
To prevent multiple copies of the CRC polynomial tables being introduced
into the postgres binaries, they are now included in the static library
libpgport that is mainly meant for replacement system functions. That
seems like a bit of a kludge, but there's no better place.
This cleans up building of the tools pg_controldata and pg_resetxlog,
which previously had to build their own copies of pg_crc.o.
In the future, external programs that need access to the CRC tables can
include the tables directly from the new header file pg_crc_tables.h.
Daniel Farina, reviewed by Abhijit Menon-Sen and Tom Lane
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
It currently doesn't make a difference, but it's inconsistent with
most other usage, and it might interfere with a future patch, so I'll
change it all in a separate commit.
Also, replace tabs with spaces for alignment.
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
recovery instead of reading the backup history file. This is more robust,
as it stops you from prematurely starting up an inconsisten cluster if the
backup history file is lost for some reason, or if the base backup was
never finished with pg_stop_backup().
This also paves the way for a simpler streaming replication patch, which
doesn't need to care about backup history files anymore.
The backup history file is still created and archived as before, but it's
not used by the system anymore. It's just for informational purposes now.
Bump PG_CONTROL_VERSION as the location of the backup startpoint is now
written to a new field in pg_control, and catversion because initdb is
required
Original patch by Fujii Masao per Simon's idea, with further fixes by me.
XID) in checkpoint records. This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist. It should also simplify life for
hot-standby operation.
To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID. This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed. The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
duplicative -DFRONTEND flags from many Makefiles. We still need Makefile
control of the symbol in a few places that compile frontend-or-backend
src/port/ files, but it's a lot cleaner than before.
Hiroshi Saito
Add the latter to the values checked in pg_control, since it can't be changed
without invalidating toast table content. This commit in itself shouldn't
change any behavior, but it lays some necessary groundwork for experimentation
with these toast-control numbers.
Note: while TOAST_TUPLE_THRESHOLD can now be changed without initdb, some
thought still needs to be given to needs_toast_table() in toasting.c before
unleashing random changes.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
in normal operation, and we can avoid rewriting pg_control at every log
segment switch if we don't insist that these values be valid. Reducing
the number of pg_control updates is a good idea for both performance and
reliability. It does make pg_resetxlog's life a bit harder, but that seems
a good tradeoff; and anyway the change to pg_resetxlog amounts to automating
something people formerly needed to do by hand, namely look at the existing
pg_xlog files to make sure the new WAL start point was past them.
In passing, change the wording of xlog.c's "database system was interrupted"
messages: describe the pg_control timestamp as "last known up at" rather than
implying it is the exact time of service interruption. With this change the
timestamp will generally be the time of the last checkpoint, which could be
many minutes before the failure; and we've already seen indications that
people tend to misinterpret the old wording.
initdb forced due to change in pg_control layout. Simon Riggs and Tom Lane
of the transaction ID counter. Nothing is done with the epoch except to
store it in checkpoint records, but this provides a foundation with which
add-on code can pretend that XIDs never wrap around. This is a severely
trimmed and rewritten version of the xxid patch submitted by Marko Kreen.
Per discussion, the epoch counter seems the only part of xxid that really
needs to be in the core server.
operation every so often. This improves the usefulness of PITR log
shipping for hot standby: formerly, if the standby server crashed, it
was necessary to restart it from the last base backup and replay all
the WAL since then. Now it will only need to reread about the same
amount of WAL as the master server would. The behavior might also
come in handy during a long PITR replay sequence. Simon Riggs,
with some editorialization by Tom Lane.
o remove many WIN32_CLIENT_ONLY defines
o add WIN32_ONLY_COMPILER define
o add 3rd argument to open() for portability
o add include/port/win32_msvc directory for
system includes
Magnus Hagander
XLOG_BLCKSZ. This ought to help in preventing configuration mismatch
problems if anyone tries to ship PITR files between servers compiled
with different XLOG_BLCKSZ settings. Simon Riggs
instead a dedicated symbol. This probably makes no functional difference
for likely values of BLCKSZ, but it makes the intent clearer.
Simon Riggs, minor editorialization by Tom Lane.
used within WAL files. Historically this was the same as the data file
BLCKSZ, but there's no necessary connection, and it's possible that
performance gains might ensue from reducing XLOG_BLCKSZ. In any case
distinguishing two symbols should improve code clarity. This commit
does not actually change the page size, only provide the infrastructure
to make it possible to do so. initdb forced because of addition of a
field to pg_control.
Mark Wong, with some help from Simon Riggs and Tom Lane.