In standby mode, we don't actually report progress of recovery,
but up until now, startup_progress_timeout_handler() nevertheless
got called every log_startup_progress_interval seconds. That's
an unnecessary expense, so avoid it.
Report by Thomas Munro. Patch by Bharath Rupireddy, reviewed by
Simon Riggs, Thomas Munro, and me. Back-patch to v15, where
the problem was introduced.
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGKCHSffAj8zZJKJvNX7ygnQFxVD6wm1d-2j3fVw%2BMafPQ%40mail.gmail.com
In the 90s we needed to deal with computers that still had the
pre-standard signal masking APIs. That hasn't been relevant for a very
long time on Unix systems, and c94ae9d8 got rid of a remaining
dependency in our Windows porting code. PG_SETMASK didn't expose
save/restore functionality, so we'd already started using sigprocmask()
directly in places, creating the visual distraction of having two ways
to spell it. It's not part of the API that extensions are expected to
be using (but if they are, the change will be trivial). It seems like a
good time to drop the old macro and just call the standard POSIX
function.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BKfQgrhHP2DLTohX1WwubaCBHmTzGnAEDPZ-Gug-Xskg%40mail.gmail.com
As coded, the timeout given to WaitLatch() was always equal to
PGARCH_AUTOWAKE_INTERVAL, as time() was called two times repeatedly.
This simplification could have been done in d75288f.
While on it, this adjusts a comment in pgarch.c to describe the archiver
in a more neutral way.
Author: Sravan Kumar, Nathan Bossart
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CA+=NbjjqYE9-Lnw7H7DAiS5jebmoMikwZQb_sBP7kgBCn9q6Hg@mail.gmail.com
We'd like to use TimestampDifferenceMilliseconds with the stop_time
possibly being TIMESTAMP_INFINITY, but up to now it's disclaimed
responsibility for overflow cases. Define it to clamp its output to
the range [0, INT_MAX], handling overflow correctly. (INT_MAX rather
than LONG_MAX seems appropriate, because the function is already
described as being intended for calculating wait times for WaitLatch
et al, and that infrastructure only handles waits up to INT_MAX.
Also, this choice gets rid of cross-platform behavioral differences.)
Having done that, we can replace some ad-hoc code in walreceiver.c
with a simple call to TimestampDifferenceMilliseconds.
While at it, fix some buglets in existing callers of
TimestampDifferenceMilliseconds: basebackup_copy.c had not read the
memo about TimestampDifferenceMilliseconds never returning a negative
value, and postmaster.c had not read the memo about Min() and Max()
being macros with multiple-evaluation hazards. Neither of these
quite seem worth back-patching.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/3126727.1674759248@sss.pgh.pa.us
Eager freezing strategy avoids large build-ups of all-visible pages. It
makes VACUUM trigger page-level freezing whenever doing so will enable
the page to become all-frozen in the visibility map. This is useful for
tables that experience continual growth, particularly strict append-only
tables such as pgbench's history table. Eager freezing significantly
improves performance stability by spreading out the cost of freezing
over time, rather than doing most freezing during aggressive VACUUMs.
It complements the insert autovacuum mechanism added by commit b07642db.
VACUUM determines its freezing strategy based on the value of the new
vacuum_freeze_strategy_threshold GUC (or reloption) with logged tables.
Tables that exceed the size threshold use the eager freezing strategy.
Unlogged tables and temp tables always use eager freezing strategy,
since the added cost is negligible there. Non-permanent relations won't
incur any extra overhead in WAL written (for the obvious reason), nor in
pages dirtied (since any extra freezing will only take place on pages
whose PD_ALL_VISIBLE bit needed to be set either way).
VACUUM uses lazy freezing strategy for logged tables that fall under the
GUC size threshold. Page-level freezing triggers based on the criteria
established in commit 1de58df4, which added basic page-level freezing.
Eager freezing is strictly more aggressive than lazy freezing. Settings
like vacuum_freeze_min_age still get applied in just the same way in
every VACUUM, independent of the strategy in use. The only mechanical
difference between eager and lazy freezing strategies is that only the
former applies its own additional criteria to trigger freezing pages.
Note that even lazy freezing strategy will trigger freezing whenever a
page happens to have required that an FPI be written during pruning,
provided that the page will thereby become all-frozen in the visibility
map afterwards (due to the FPI optimization from commit 1de58df4).
The vacuum_freeze_strategy_threshold default setting is 4GB. This is a
relatively low setting that prioritizes performance stability. It will
be reviewed at the end of the Postgres 16 beta period.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
Modify the new event loop code from commit 7389aad6 so that it checks
for work requested by signal handlers even if it doesn't see a latch
event yet.
This gives priority to shutdown and reload requests where the latch will
be reported later in the event array, or in a later call to
WaitEventSetWait(), due to scheduling details. In particular, this
guarantees that a SIGHUP-then-connect sequence (as seen in
authentication tests) causes the postmaster to process the reload before
accepting the connection. If the WaitEventSetWait() call saw the socket
as ready, and the reload signal was generated before the connection,
then the latest time the signal handler should be able to run is after
poll/epoll_wait/kevent returns but before we check the
pending_pm_reload_request flag.
While here, also shift the handling of child exit below reload requests,
per Tom Lane's observation that that might start new processes, so we
should make sure we pick up new settings first.
This probably explains the one-off failure of build farm animal
malleefowl.
Reported-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/OS0PR01MB57163D3BF2AB42ECAA94E5C394C29%40OS0PR01MB5716.jpnprd01.prod.outlook.com
When the length was too short, the server read outside the allocation.
That yielded the same log noise as sending the correct length with
(backendPID,cancelAuthCode) matching nothing. Change to a message about
the unexpected length. Given the attacker's lack of control over the
memory layout and the general lack of diversity in memory layouts at the
code in question, we doubt a would-be attacker could cause a segfault.
Hence, while the report arrived via security@postgresql.org, this is not
a vulnerability. Back-patch to v11 (all supported versions).
Andrey Borodin, reviewed by Tom Lane. Reported by Andrey Borodin.
This will ease a follow-up move that will generate automatically this
code. The C file is renamed, for consistency with the node-related
files whose code are generated by gen_node_support.pl:
- queryjumble.c -> queryjumblefuncs.c
- utils/queryjumble.h -> nodes/queryjumble.h
Per a suggestion from Peter Eisentraut.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
This provides a way to reserve connection slots for non-superusers.
The slots reserved via the new GUC are available only to users who
have the new predefined role pg_use_reserved_connections.
superuser_reserved_connections remains as a final reserve in case
reserved_connections has been exhausted.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
This is in preparation for adding a new reserved_connections GUC,
but aligning the GUC name with the variable name is also a good
idea on general principle.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
Switch to a design similar to regular backends, instead of the previous
arrangement where signal handlers did non-trivial state management and
called fork(). The main changes are:
* The postmaster now has its own local latch to wait on. (For now, we
don't want other backends setting its latch directly, but that could
probably be made to work with more research on robustness.)
* The existing signal handlers are cut in two: a handle_pm_XXX() part
that just sets pending_pm_XXX flags and the latch, and a
process_pm_XXX() part that runs later when the latch is seen.
* Signal handlers are now installed with the regular pqsignal()
function rather than the special pqsignal_pm() function; historical
portability concerns about the effect of SA_RESTART on select() are no
longer relevant, and we don't need to block signals anymore.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
There are a number of places where a shell command is constructed with
percent-placeholders (like %x). It's cumbersome to have to open-code
this several times. This factors out this logic into a separate
function. This also allows us to ensure consistency for and document
some subtle behaviors, such as what to do with unrecognized
placeholders.
The unified handling is now that incorrect and unknown placeholders
are an error, where previously in most cases they were skipped or
ignored. This affects the following settings:
- archive_cleanup_command
- archive_command
- recovery_end_command
- restore_command
- ssl_passphrase_command
The following settings are part of this refactoring but already had
stricter error handling and should be unchanged in their behavior:
- basebackup_to_shell.command
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5238bbed-0b01-83a6-d4b2-7eb0562a054e%40enterprisedb.com
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
The same code pattern is repeated 17 times for int64 counters (0 for
missing entry) and 5 times for timestamps (NULL for missing entry) on
table entries. This code is switched to use a macro for the basic code
instead, shaving a few hundred lines of originally-duplicated code. The
function names remain the same, but some fields of PgStat_StatTabEntry
have to be renamed to cope with the new style.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart
Discussion: https:/postgr.es/m/20221204173207.GA2669116@nathanxps13
Logical WAL senders display now as follows, gaining a database name:
postgres: walsender USER DATABASE HOST(PORT) STATE
Physical WAL senders show up the same, as of:
postgres: walsender USER HOST(PORT) STATE
This information was missing, hence it was not possible to know from ps
if a WAL sender was a logical or a physical one, and on which database
it is connected when it is logical.
Author: Tatsuhiro Nakamori
Reviewed-by: Fujii Masao, Bharath Rupireddy
Discussion: https://postgr.es/m/36a3b137e82e0ea9fe7e4234f03b64a1@oss.nttdata.com
The postmaster normally sends SIGQUIT to force-terminate its
child processes after a child crash or immediate-stop request.
If that doesn't result in child exit within a few seconds,
we follow it up with SIGKILL. This patch provides GUC flags
that allow either of these signals to be replaced with SIGABRT.
On typically-configured Unix systems, that will result in a
core dump being produced for each such child. This can be
useful for debugging problems, although it's not something you'd
want to have on in production due to the risk of disk space
bloat from lots of core files.
The old postmaster -T switch, which sent SIGSTOP in place of
SIGQUIT, is changed to be the same as send_abort_for_crash.
As far as I can tell from the code comments, the intent of
that switch was just to block things for long enough to force
core dumps manually, which seems like an unnecessary extra step.
(Maybe at the time, there was no way to get most kernels to
produce core files with per-PID names, requiring manual core
file renaming after each one. But now it's surely the hard way.)
I also took the opportunity to remove the old postmaster -n
(skip shmem reinit) switch, which hasn't actually done anything
in decades, though the documentation still claimed it did.
Discussion: https://postgr.es/m/2251016.1668797294@sss.pgh.pa.us
Setting archive_library and archive_command at the same time is now an
error. Before, archive_library would take precedence over
archive_command.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/20220914222736.GA3042279%40nathanxps13
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
As currently designed, with a callback registered in a ERROR_CLEANUP
block, the shutdown callback would get called twice when updating
archive_library on SIGHUP, which is something that we want to avoid to
ease the life of extension writers.
Anyway, an ERROR in the archiver process is treated as a FATAL, stopping
it immediately, hence there is no need for a ERROR_CLEANUP block.
Instead of that, the shutdown callback is not called upon
before_shmem_exit(), giving to the modules the opportunity to do any
cleanup actions before the server shuts down its subsystems.
While on it, this commit adds some testing coverage for the shutdown
callback. Neither shell_archive nor basic_archive have been using it,
and one is added to shell_archive, whose trigger is checked in a TAP
test through a shutdown sequence.
Author: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20221015221328.GB1821022@nathanxps13
Backpatch-through: 15
The only real argument for using malloc directly was that we needed
the ability to not throw error on OOM; but mcxt.c grew that feature
awhile ago.
Keeping the data in a memory context improves accountability and
debuggability --- for example, without this it's almost impossible
to detect memory leaks in the GUC code with anything less costly
than valgrind. Moreover, the next patch in this series will add a
hash table for GUC lookup, and it'd be pretty silly to be using
palloc-dependent hash facilities alongside malloc'd storage of the
underlying data.
This is a bit invasive though, in particular causing an API break
for GUC check hooks that want to modify the GUC's value or use an
"extra" data structure. They must now use guc_malloc() and
guc_free() instead of malloc() and free(). Failure to change
affected code will result in assertion failures or worse; but
thanks to recent effort in the mcxt infrastructure, it shouldn't
be too hard to diagnose such oversights (at least in assert-enabled
builds).
One note is that this changes ParseLongOption() to return short-lived
palloc'd not malloc'd data. There wasn't any caller for which the
previous definition was better.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
Most code prints PIDs as %d, but some code tried to print them as long
or unsigned long. While this is in theory allowed, the fact that PIDs
fit into int is deeply baked into all PostgreSQL code, so these random
deviations don't accomplish anything except confusion.
Note that we still need casts from pid_t to int, because on 64-bit
MinGW, pid_t is long long int. (But per above, actually supporting
that range in PostgreSQL code would be major surgery and probably not
useful.)
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
In a similar effort to f736e188c and 110d81728, fixup various usages of
string functions where a more appropriate function is available and more
fit for purpose.
These changes include:
1. Use cstring_to_text_with_len() instead of cstring_to_text() when
working with a StringInfoData and the length can easily be obtained.
2. Use appendStringInfoString() instead of appendStringInfo() when no
formatting is required.
3. Use pstrdup(...) instead of psprintf("%s", ...)
4. Use pstrdup(...) instead of psprintf(...) (with no formatting)
5. Use appendPQExpBufferChar() instead of appendPQExpBufferStr() when the
length of the string being appended is 1.
6. appendStringInfoChar() instead of appendStringInfo() when no formatting
is required and string is 1 char long.
7. Use appendPQExpBufferStr(b, .) instead of appendPQExpBuffer(b, "%s", .)
8. Don't use pstrdup when it's fine to just point to the string constant.
I (David) did find other cases of #8 but opted to use #4 instead as I
wasn't certain enough that applying #8 was ok (e.g in hba.c)
Author: Ranier Vilela, David Rowley
Discussion: https://postgr.es/m/CAApHDvo2j2+RJBGhNtUz6BxabWWh2Jx16wMUMWKUjv70Ver1vg@mail.gmail.com
get_database_list() failed to restore the caller's memory context,
instead leaving current context set to TopMemoryContext which is
how CommitTransactionCommand() leaves it. The callers both think
they are using short-lived contexts, for the express purpose of
not having to worry about cleaning up individual allocations.
The net effect therefore is that supposedly short-lived allocations
could accumulate indefinitely in the launcher's TopMemoryContext.
Although this has been broken for a long time, it seems we didn't
have any obvious memory leak here until v15's rearrangement of the
stats logic. I (tgl) am not entirely convinced that there's no
other leak at all, though, and we're surely at risk of adding one
in future back-patched fixes. So back-patch to all supported
branches, even though this may be only a latent bug in pre-v15.
Reid Thompson
Discussion: https://postgr.es/m/972a4e12b68b0f96db514777a150ceef7dcd2e0f.camel@crunchydata.com
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
In a similar effort to f01592f91, here we're targetting fixing the
warnings where we've deemed the shadowing variable to serve a close enough
purpose to the shadowed variable just to reuse the shadowed version and
not declare the shadowing variable at all.
By my count, this takes the warning count from 106 down to 71.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220825020839.GT2342@telsasoft.com
This commit moves authn_id into a new global structure called
ClientConnectionInfo (mapping to a MyClientConnectionInfo for each
backend) which is intended to hold all the client information that
should be shared between the backend and any of its parallel workers,
access for extensions and triggers being the primary use case. There is
no need to push all the data of Port to the workers, and authn_id is
quite a generic concept so using a separate structure provides the best
balance (the name of the structure has been suggested by Robert Haas).
While on it, and per discussion as this would be useful for a potential
SYSTEM_USER that can be accessed through parallel workers, a second
field is added for the authentication method, copied directly from
Port.
ClientConnectionInfo is serialized and restored using a new parallel
key and a structure tracks the length of the authn_id, making the
addition of more fields straight-forward.
Author: Jacob Champion
Reviewed-by: Bertrand Drouvot, Stephen Frost, Robert Haas, Tom Lane,
Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/793d990837ae5c06a558d58d62de9378ab525d83.camel@vmware.com
sysctl is more portable than Linux's /proc/sys file tree, and
often easier to use too. That's why most of our docs refer to
sysctl when talking about how to adjust kernel parameters.
Bring the few stragglers into line.
Discussion: https://postgr.es/m/361175.1661187463@sss.pgh.pa.us
Since HAVE_UNIX_SOCKETS is now defined unconditionally, remove the macro
and drop a small amount of dead code.
The last known systems not to have them (as far as I know at least) were
QNX, which we de-supported years ago, and Windows, which now has them.
If a new OS ever shows up with the POSIX sockets API but without working
AF_UNIX, it'll presumably still be able to compile the code, and fail at
runtime with an unsupported address family error. We might want to
consider adding a HINT that you should turn off the option to use it if
your network stack doesn't support it at that point, but it doesn't seem
worth making the relevant code conditional at compile time.
Also adjust a couple of places in the docs and comments that referred to
builds without Unix-domain sockets, since there aren't any. Windows
still gets a special mention in those places, though, because we don't
try to use them by default there yet.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
This is particularly useful when log_min_messages is set to FATAL, so as
one can know which file was not getting loaded whether hba_file or
ident_file are set to some non-default values. If using the default
values of these GUC parameters, the same reports are generated.
This commit changes the load (startup) and reload (SIGHUP) messages.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
Presently, archive status files are durably renamed from .ready to
.done to indicate that a file has been archived. Persisting this
rename to disk accounts for a significant amount of the overhead
associated with archiving. While durably renaming the file
prevents re-archiving in most cases, archive commands and libraries
must already gracefully handle attempts to re-archive the last
archived file after a crash (e.g., a crash immediately after
archive_command exits but before the server renames the status
file).
This change reduces the amount of overhead associated with
archiving by using rename() instead of durable_rename() to rename
the archive status files. As a consequence, the server is more
likely to attempt to re-archive files after a crash, but as noted
above, archive commands and modules are already expected to handle
this. It is also possible that the server will attempt to re-
archive files that have been removed or recycled, but the archiver
already handles this, too.
Author: Nathan Bossart
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20220222011948.GA3850532@nathanxps13
Previously we did this after InitPostgres, at a somewhat randomly chosen
place within PostgresMain. However, since commit a0ffa885e doing this
outside a transaction can cause a crash, if we need to check permissions
while replacing a placeholder GUC. (Besides which, a preloaded library
could itself want to do database access within _PG_init.)
To avoid needing an additional transaction start/end in every session,
move the process_session_preload_libraries call to within InitPostgres's
transaction. That requires teaching the code not to call it when
InitPostgres is called from somewhere other than PostgresMain, since
we don't want session_preload_libraries to affect background workers.
The most future-proof solution here seems to be to add an additional
flag parameter to InitPostgres; fortunately, we're not yet very worried
about API stability for v15.
Doing this also exposed the fact that we're currently honoring
session_preload_libraries in walsenders, even those not connected to
any database. This seems, at minimum, a POLA violation: walsenders
are not interactive sessions. Let's stop doing that.
(All these comments also apply to local_preload_libraries, of course.)
Per report from Gurjeet Singh (thanks also to Nathan Bossart and Kyotaro
Horiguchi for review). Backpatch to v15 where a0ffa885e came in.
Discussion: https://postgr.es/m/CABwTF4VEpwTHhRQ+q5MiC5ucngN-whN-PdcKeufX7eLSoAfbZA@mail.gmail.com
This fixes problems on windows when logging collector is used in a service,
failing with:
FATAL: could not redirect stderr: Bad file descriptor
This is triggered by 76e38b37a5. The problem is that STDOUT/STDERR_FILENO
aren't defined on windows, which lead us to use _fileno(stdout) etc, but that
doesn't work if stdout/stderr are closed.
Author: Andres Freund <andres@anarazel.de>
Reported-By: Sandeep Thakkar <sandeep.thakkar@enterprisedb.com>
Message-Id: 20220520164558.ozb7lm6unakqzezi@alap3.anarazel.de (on pgsql-packagers)
Backpatch: 15-, where 76e38b37a5 came in
reset_shared just invokes CreateSharedMemoryAndSemaphores, so let's
get rid of it and invoke that directly. This removes a confusing
seeming-inconsistency between the postmaster's startup sequence
and the startup sequence used in standalone mode.
Nathan Bossart, reviewed by Pavel Borisov
Discussion: https://postgr.es/m/20220329221702.GA559657@nathanxps13
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
The original advice for hard-wired SetConfigOption calls was to use
PGC_S_OVERRIDE, particularly for PGC_INTERNAL GUCs. However,
that's really overkill for PGC_INTERNAL GUCs, since there is no
possibility that we need to override a user-provided setting.
Instead use PGC_S_DYNAMIC_DEFAULT in most places, so that the
value will appear with source = 'default' in pg_settings and thereby
not be shown by psql's new \dconfig command. The one exception is
that when changing in_hot_standby in a hot-standby session, we still
use PGC_S_OVERRIDE, because people felt that seeing that in \dconfig
would be a good thing.
Similarly use PGC_S_DYNAMIC_DEFAULT for the auto-tune value of
wal_buffers (if possible, that is if wal_buffers wasn't explicitly
set to -1), and for the typical 2MB value of max_stack_depth.
In combination these changes remove four not-very-interesting
entries from the typical output of \dconfig, all of which people
fingered as "why is that showing up?" in the discussion thread.
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Currently, preloaded libraries are expected to request additional
shared memory and LWLocks in _PG_init(). However, it is not unusal
for such requests to depend on MaxBackends, which won't be
initialized at that time. Such requests could also depend on GUCs
that other modules might change. This introduces a new hook where
modules can safely use MaxBackends and GUCs to request additional
shared memory and LWLocks.
Furthermore, this change restricts requests for shared memory and
LWLocks to this hook. Previously, libraries could make requests
until the size of the main shared memory segment was calculated.
Unlike before, we no longer silently ignore requests received at
invalid times. Instead, we FATAL if someone tries to request
additional shared memory or LWLocks outside of the hook.
Nathan Bossart and Julien Rouhaud
Discussion: https://postgr.es/m/20220412210112.GA2065815%40nathanxps13
Discussion: https://postgr.es/m/Yn2jE/lmDhKtkUdr@paquier.xyz
The code for unloading a library has been commented-out for over 12
years, ever since commit 602a9ef5a7, and we're
no closer to supporting it now than we were back then.
Nathan Bossart, reviewed by Michael Paquier and by me.
Discussion: http://postgr.es/m/Ynsc9bRL1caUSBSE@paquier.xyz
Presently, the server may emit a variety of log messages when inspecting
a runtime-computed GUC, mostly in the shape of one LOG message with the
default configuration, related to the startup sequence launched as such
GUCs require a load of the control file and of external shared
libraries.
For example, the server will always emit a "database system is shut
down" LOG (unless the user has set log_min_messages higher than LOG),
which is an annoying behavior as "postgres -C" is expected to only emit
in its output the parameter value we are looking for. The parameter
value is sent to stdout, while the logs are sent to stderr so we could
recommend to use a redirection, but there was not much love for this
workaround either.
To avoid such extra log messages, per discussion, this change sets
log_min_messages to FATAL internally when -C is used on a
runtime-computed GUC (even if set to PANIC in postgresql.conf). At
FATAL, the user will still receive messages explaining why a GUC value
cannot be inspected, and will know if the command is attempted on a
server already running, something not supported yet for a
runtime-computed GUC.
Reported-by: Magnus Hagander, Bruce Momjian
Author: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/Yni6ZHkGotUU+RSf@paquier.xyz
Since 6bc8ef0b7f, the maximum number
of backends can't change as background workers are registered, but
these comments still reflect the way things worked prior to that.
Also, per recent discussion, some modules call SetConfigOption()
from _PG_init(). It's not entirely clear to me whether we want to
regard that as a fully supported operation, but since we know it's
a thing that happens, it at least deserves a mention in the comments,
so add that.
Nathan Bossart, reviewed by Anton A. Melnikov
Discussion: http://postgr.es/m/20220419154658.GA2487941@nathanxps13
This reverts commits 0147fc7, 4567596, aa64f23, and 5ecd018.
There is no longer agreement that introducing this function
was the right way to address the problem. The consensus now
seems to favor trying to make a correct value for MaxBackends
available to mdules executing their _PG_init() functions.
Nathan Bossart
Discussion: http://postgr.es/m/20220323045229.i23skfscdbvrsuxa@jrouhaud
Allow extensions to specify a new custom resource manager (rmgr),
which allows specialized WAL. This is meant to be used by a Table
Access Method or Index Access Method.
Prior to this commit, only Generic WAL was available, which offers
support for recovery and physical replication but not logical
replication.
Reviewed-by: Julien Rouhaud, Bharath Rupireddy, Andres Freund
Discussion: https://postgr.es/m/ed1fb2e22d15d3563ae0eb610f7b61bb15999c0a.camel%40j-davis.com
With stats now being stored in shared memory, the GUC isn't needed
anymore. However, the pg_stat_tmp directory and PG_STAT_TMP_DIR define are
kept, as pg_stat_statements (and some out-of-core extensions) store data in
it.
Docs will be updated in a subsequent commit, together with the other pending
docs updates due to shared memory stats.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220330233550.eiwsbearu6xhuqwe@alap3.anarazel.de
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
Most of pgstat uses pgstat_<verb>_<subject>() or just <verb>_<subject>(). But
not all (some introduced fairly recently by me). Rename ones that aren't
intentionally following a different scheme (e.g. AtEOXact_*).
Previously the pgstat <-> replication slots API was done with on the basis of
names. However, the upcoming move to storing stats in shared memory makes it
more convenient to use a integer as key.
Change the replication slot functions to take the slot rather than the slot
name, and expose ReplicationSlotIndex() to compute the index of an replication
slot. Special handling will be required for restarts, as the index is not
stable across restarts. For now pgstat internally still uses names.
Rename pgstat_report_replslot_{create,drop}() to
pgstat_{create,drop}_replslot() to match the functions for other kinds of
stats.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
One problematic part of the current statistics collector design is that there
is no reliable way of getting rid of statistics entries. Because of that
pgstat_vacuum_stat() (called by [auto-]vacuum) matches all stats for the
current database with the catalog contents and tries to drop now-superfluous
entries. That's quite expensive. What's worse, it doesn't work on physical
replicas, despite physical replicas collection statistics entries.
This commit introduces infrastructure to create / drop statistics entries
transactionally, together with the underlying catalog objects (functions,
relations, subscriptions). pgstat_xact.c maintains a list of stats entries
created / dropped transactionally in the current transaction. To ensure the
removal of statistics entries is durable dropped statistics entries are
included in commit / abort (and prepare) records, which also ensures that
stats entries are dropped on standbys.
Statistics entries created separately from creating the underlying catalog
object (e.g. when stats were previously lost due to an immediate restart)
are *not* WAL logged. However that can only happen outside of the transaction
creating the catalog object, so it does not lead to "leaked" statistics
entries.
For this to work, functions creating / dropping functions / relations /
subscriptions need to call into pgstat. For subscriptions this was already
done when dropping subscriptions, via pgstat_report_subscription_drop() (now
renamed to pgstat_drop_subscription()).
This commit does not actually drop stats yet, it just provides the
infrastructure. It is however a largely independent piece of infrastructure,
so committing it separately makes sense.
Bumps XLOG_PAGE_MAGIC.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
With the introduction of PgStat_Kind PgStat_Single_Reset_Type,
PgStat_Shared_Reset_Target don't make sense anymore. Replace them with
PgStat_Kind.
Instead of having dedicated reset functions for different kinds of stats, use
two generic helper routines (one to reset all stats of a kind, one to reset
one stats entry).
A number of reset functions were named pgstat_reset_*_counter(), despite
affecting multiple counters. The generic helper routines get rid of
pgstat_reset_single_counter(), pgstat_reset_subscription_counter().
Rename pgstat_reset_slru_counter(), pgstat_reset_replslot_counter() to
pgstat_reset_slru(), pgstat_reset_replslot() respectively, and have them only
deal with a single SLRU/slot. Resetting all SLRUs/slots goes through the
generic pgstat_reset_of_kind().
Previously pg_stat_reset_replication_slot() used SearchNamedReplicationSlot()
to check if a slot exists. API wise it seems better to move that to
pgstat_replslot.c.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Only the pgstat_send_* functions that are called from outside pgstat*.c are
renamed (the rest will go away). This is done separately from the - quite
large - shared memory statistics patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
The transactional integration code is largely independent from the rest of
pgstat.c. Subsequent commits will add more related code.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
Now that 13619598f1 has split pgstat up into multiple files it isn't quite as
hard to come up with a sensible order for pgstat.[ch]. Inconsistent naming
makes it still not quite right looking, but that's work for another commit.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
pgstat.c is very long, and it's hard to find an order that makes sense and is
likely to be maintained over time. Splitting the different pieces into
separate files makes that a lot easier.
With a few exceptions, this commit just moves code around. Those exceptions
are:
- adding file headers for new files
- removing 'static' from functions
- adapting pgstat_assert_is_up() to work across TUs
- minor comment adjustments
git diff --color-moved=dimmed-zebra is very helpful separating code movement
from code changes.
The next commit in this series will reorder pgstat.[ch] contents to be a bit
more coherent.
Earlier revisions of this patch had "global" statistics (archiver, bgwriter,
checkpointer, replication slots, SLRU, WAL) in one file, because each seemed
small enough. However later commits will increase their size and their
aggregate size is not insubstantial. It also just seems easier to split each
type of statistic into its own file.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
The old name was overly generic. An upcoming commit moves relation stats
handling into its own file, making pgstat_initstats() look even more out of
place.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
A later commit will make the check more complicated than the
current (rel)->pgstat_info != NULL. It also just seems nicer to have a central
copy of the logic, even while still simple.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
A later commit will move the handling of the different kinds of stats into
separate files. By splitting out WAL handling in this commit that later move
will just move code around without other changes.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
pgstat_report_stat() handles several types of stats, yet relation stats have
so far been handled directly in pgstat_report_stat().
A later commit will move the handling of the different kinds of stats into
separate files. By splitting out relation handling in this commit that later
move will just move code around without other changes.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
The checkpointer shouldn't ignore its latch. Other backends may be
waiting for it to drain the request queue. Hopefully real systems don't
have a full queue often, but the condition is reached easily when
shared_buffers is small.
This involves defining a new wait event, which will appear in the
pg_stat_activity view often due to spread checkpoints.
Back-patch only to 14. Even though the problem exists in earlier
branches too, it's hard to hit there. In 14 we stopped using signal
handlers for latches on Linux, *BSD and macOS, which were previously
hiding this problem by interrupting the sleep (though not reliably, as
the signal could arrive before the sleep begins; precisely the problem
latches address).
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
It was decided (refer to the Discussion link below) that the stats
collector is not an appropriate place to store the error information of
subscription workers.
This patch changes the pg_stat_subscription_workers view (introduced by
commit 8d74fc96db) so that it stores only statistics counters:
apply_error_count and sync_error_count, and has one entry for
each subscription. The removed error information such as error-XID and
the error message would be stored in another way in the future which is
more reliable and persistent.
After removing these error details, there is no longer any relation
information, so the subscription statistics are now a cluster-wide
statistics.
The patch also changes the view name to pg_stat_subscription_stats since
the word "worker" is an implementation detail that we use one worker for
one tablesync and one apply.
Author: Masahiko Sawada, based on suggestions by Andres Freund
Reviewed-by: Peter Smith, Haiying Tang, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/20220125063131.4cmvsxbz2tdg6g65@alap3.anarazel.de
GCC 12 complains that set_stack_base is storing the address of
a local variable in a long-lived pointer. This is an entirely
reasonable warning (indeed, it just helped us find a bug);
but that behavior is intentional here. We can work around it
by using __builtin_frame_address(0) instead of a specific local
variable; that produces an address a dozen or so bytes different,
in my testing, but we don't care about such a small difference.
Maybe someday a compiler lacking that function will start to issue
a similar warning, but we'll worry about that when it happens.
Patch by me, per a suggestion from Andres Freund. Back-patch to
v12, which is as far back as the patch will go without some pain.
(Recently-established project policy would permit a back-patch as
far as 9.2, but I'm disinclined to expend the work until GCC 12
is much more widespread.)
Discussion: https://postgr.es/m/3773792.1645141467@sss.pgh.pa.us
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
The AF_UNIX macro was being used unprotected by HAVE_UNIX_SOCKETS,
apparently since 2008. So the redirection through IS_AF_UNIX() is
apparently no longer necessary. (More generally, all supported
platforms are now HAVE_UNIX_SOCKETS, but even if there were a new
platform in the future, it seems plausible that it would define the
AF_UNIX symbol even without kernel support.) So remove the
IS_AF_UNIX() macro and make the code a bit more consistent.
Discussion: https://www.postgresql.org/message-id/flat/f2d26815-9832-e333-d52d-72fbc0ade896%40enterprisedb.com
Previously, it was really easy to write code that accessed MaxBackends
before we'd actually initialized it, especially when coding up an
extension. To make this less error-prune, introduce a new function
GetMaxBackends() which should be used to obtain the correct value.
This will ERROR if called too early. Demote the global variable to
a file-level static, so that nobody can peak at it directly.
Nathan Bossart. Idea by Andres Freund. Review by Greg Sabino Mullane,
by Michael Paquier (who had doubts about the approach), and by me.
Discussion: http://postgr.es/m/20210802224204.bckcikl45uezv5e4@alap3.anarazel.de
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
Since 6bc8ef0b, InitializeMaxBackends() has used max_worker_processes
instead of adapting MaxBackends to the number of background workers
registered by modules loaded in shared_preload_libraries (at this time,
bgworkers were only static, but gained dynamic capabilities as a matter
of supporting parallel queries meaning that a control cap was
necessary).
Some comments referred to the past registration logic, making them
confusing and incorrect, so fix these.
Some of the out-of-core modules that could be loaded in this path
sometimes like to manipulate dynamically some of the resource-related
GUCs for their own needs, this commit adds a note about that.
Author: Nathan Bossart
Discussion: https://postgr.es/m/20220127181815.GA551692@nathanxps13
"jsonlog" is a new value that can be added to log_destination to provide
logs in the JSON format, with its output written to a file, making it
the third type of destination of this kind, after "stderr" and
"csvlog". The format is convenient to feed logs to other applications.
There is also a plugin external to core that provided this feature using
the hook in elog.c, but this had to overwrite the output of "stderr" to
work, so being able to do both at the same time was not possible. The
files generated by this log format are suffixed with ".json", and use
the same rotation policies as the other two formats depending on the
backend configuration.
This takes advantage of the refactoring work done previously in ac7c807,
bed6ed3, 8b76f89 and 2d77d83 for the backend parts, and 72b76f7 for the
TAP tests, making the addition of any new file-based format rather
straight-forward.
The documentation is updated to list all the keys and the values that
can exist in this new format. pg_current_logfile() also required a
refresh for the new option.
Author: Sehrope Sarkuni, Michael Paquier
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
Previously pg_log_backend_memory_contexts() could request to
log the memory contexts of backends, but not of auxiliary processes
such as checkpointer. This commit enhances the function so that
it can also send the request to auxiliary processes. It's useful to
look at the memory contexts of those processes for debugging purpose
and better understanding of the memory usage pattern of them.
Note that pg_log_backend_memory_contexts() cannot send the request
to logger or statistics collector. Because this logging request
mechanism is based on shared memory but those processes aren't
connected to that.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACU1nBzpacOK2q=a65S_4+Oaz_rLTsU1Ri0gf7YUmnmhfQ@mail.gmail.com
The arch_filenames[] array elements were one byte too small, so that
a maximum-length filename would get corrupted if another entry
were made after it. (Noted by Thomas Munro, fix by Nathan Bossart.)
Move these arrays into a palloc'd struct, so that we aren't wasting
a few kilobytes of static data in each non-archiver process.
Add a binaryheap_reset() call to make it plain that we start the
directory scan with an empty heap. I don't think there's any live
bug of that sort, but it seems fragile, and this is very cheap
insurance.
Cleanup for commit beb4e9ba1, so no back-patch needed.
Discussion: https://postgr.es/m/CA+hUKGLHAjHuKuwtzsW7uMJF4BVPcQRL-UMZG_HM-g0y7yLkUg@mail.gmail.com
It's not great that RecoveryInProgress() calls InitXLOGAccess(),
because a status inquiry function typically shouldn't have the side
effect of performing initializations. We could fix that by calling
InitXLOGAccess() from some other place, but instead, let's remove it
altogether.
One thing InitXLogAccess() did is initialize wal_segment_size, but it
doesn't need to do that. In the postmaster, PostmasterMain() calls
LocalProcessControlFile(), and all child processes will inherit that
value -- except in EXEC_BACKEND bulds, but then each backend runs
SubPostmasterMain() which also calls LocalProcessControlFile().
The other thing InitXLOGAccess() did is update RedoRecPtr and
doPageWrites, but that's not critical, because all code that uses
them will just retry if it turns out that they've changed. The
only difference is that most code will now see an initial value that
is definitely invalid instead of one that might have just been way
out of date, but that will only happen once per backend lifetime,
so it shouldn't be a big deal.
Patch by me, reviewed by Nathan Bossart, Michael Paquier, Andres
Freund, Heikki Linnakangas, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
Andres Freund
Robert Haas
Thomas Munro
Michael Paquier
Tom Lane
Peter Geoghegan
Noah Misch
Peter Eisentraut
Amit Kapila
Bruce Momjian
Andrew Dunstan
John Naylor
David Rowley
Fujii Masao
Alvaro Herrera
Jeff Davis
Stephen Frost
Heikki Linnakangas