WHERE in a place where it can be part of a nestloop inner indexqual.
As the code stood, it put the same physical sub-Plan node into both
indxqual and indxqualorig of the IndexScan plan node. That confused
later processing in the optimizer (which expected that tracing the
subPlan list would visit each subplan node exactly once), and would
probably have blown up in the executor if the planner hadn't choked first.
Fix by making the 'fixed' indexqual be a complete deep copy of the
original indexqual, rather than trying to share nodes below the topmost
operator node. This had further ramifications though, because we were
making the aforesaid list of sub-Plan nodes during SS_process_sublinks
which is run before construction of the 'fixed' indexqual, meaning that
the copy of the sub-Plan didn't show up in that list. Fix by rearranging
logic so that the sub-Plan list is built by the final set_plan_references
pass, not in SS_process_sublinks. This may sound like a mess, but it's
actually a good deal cleaner now than it was before, because we are no
longer dependent on the assumption that planning will never make a copy
of a sub-Plan node.
to next integer. Previously, if selectivity was small, we could compute
very tiny scan cost on the basis of estimating that only 0.001 tuple
would be fetched, which is silly. This naturally led to some rather
silly plans...
to avoid undue sensitivity to roundoff error, believe that a zero
or slightly negative range estimate should represent a small
positive selectivity, rather than falling back on a generic default
estimate.
use a default value that's fairly small. We were generating a result
of about 0.1, but I think 0.01 is probably better --- want to encourage
use of an indexscan in this situation.
costs using the inner path's parent->rows count as the number of tuples
processed per inner scan iteration. This is wrong when we are using an
inner indexscan with indexquals based on join clauses, because the rows
count in a Relation node reflects the selectivity of the restriction
clauses for that rel only. Upshot was that if join clause was very
selective, we'd drastically overestimate the true cost of the join.
Fix is to calculate correct output-rows estimate for an inner indexscan
when the IndexPath node is created and save it in the path node.
Change of path node doesn't require initdb, since path nodes don't
appear in saved rules.
to simplify constant expressions and expand SubLink nodes into SubPlans
is done in a separate routine subquery_planner() that calls union_planner().
We formerly did most of this work in query_planner(), but that's the
wrong place because it may never see the real targetlist. Splitting
union_planner into two routines also allows us to avoid redundant work
when union_planner is invoked recursively for UNION and inheritance
cases. Upshot is that it is now possible to do something like
select float8(count(*)) / (select count(*) from int4_tbl) from int4_tbl
group by f1;
which has never worked before.
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
that the inputs to a given operator can be recursively simplified to
constants, it was evaluating the operator using the op's *original*
(unsimplified) arg list, so that any subexpressions had to be evaluated
again. A constant subexpression at depth N got evaluated N times.
Probably not very important in practical situations, but it made us look
real slow in MySQL's 'crashme' test...
subplan: do it if subplan has subplans itself, and always do it if the
subplan is an indexscan. (I originally set it to materialize an indexscan
only if the indexqual is fairly selective, but I dunno what I was
thinking ... an unselective indexscan is still expensive ...)
portion of the query result that will be retrieved. As far as I could
tell, the consensus was that we should let the planner do the best it
can with a LIMIT query, and require the user to add ORDER BY if he
wants consistent results from different LIMIT values.
represent the result of a binary-compatible type coercion. At runtime
it just evaluates its argument --- but during type resolution, exprType
will pick up the output type of the RelabelType node instead of the type
of the argument. This solves some longstanding problems with dropped
type coercions, an example being 'select now()::abstime::int4' which
used to produce date-formatted output, not an integer, because the
coercion to int4 was dropped on the floor.
selectivity functions and make the r-tree operators use them. The
estimation functions themselves are just stubs, unfortunately, but
perhaps someday someone will make them compute realistic estimates.
Change pg_am so that the optimizer can reliably tell the difference
between ordered and unordered indexes --- before it would think that
an r-tree index can be scanned in '<<' order, which is not right AFAIK.
Repair broken negator links for network_sup and related ops.
Initdb forced. This might be my last initdb force for 7.0 ... hope so
anyway ...
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
SELECT a FROM t1 tx (a);
Allow join syntax, including queries like
SELECT * FROM t1 NATURAL JOIN t2;
Update RTE structure to hold column aliases in an Attr structure.
fields in JoinPaths --- turns out that we do need that after all :-(.
Also, rearrange planner so that only one RelOptInfo is created for a
particular set of joined base relations, no matter how many different
subsets of relations it can be created from. This saves memory and
processing time compared to the old method of making a bunch of RelOptInfos
and then removing the duplicates. Clean up the jointree iteration logic;
not sure if it's better, but I sure find it more readable and plausible
now, particularly for the case of 'bushy plans'.
nonoverlap_sets() and is_subset() to list.c, where they should have lived
to begin with, and rename to nonoverlap_setsi and is_subseti since they
only work on integer lists.
extracting from an AND subclause just those opclauses that are relevant
for a particular index. For example, we can now consider using an index
on x to process WHERE (x = 1 AND y = 2) OR (x = 2 AND y = 4) OR ...
2-Oct-98 or TODO.detail/cnfify) to decide whether we want to reduce
WHERE clause to CNF form, DNF form, or neither. This is a HUGE win.
The heuristic conditions could probably still use a little tweaking to
make sure we don't pick CNF when DNF would be better, or vice versa,
but the risk of exponential explosion in cnfify() is gone. I was able
to run ten-thousand-AND-subclause queries through the planner in a
reasonable amount of time.
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
(ie, WHERE x > lowbound AND x < highbound). It's not very bright yet
but it does something useful. Also, rename intltsel/intgtsel to
scalarltsel/scalargtsel to reflect usage better. Extend convert_to_scalar
to do something a little bit useful with string data types. Still need
to make it do something with date/time datatypes, but I'll wait for
Thomas's datetime unification dust to settle first. Eventually the
routine ought not have any type-specific knowledge at all; it ought to
be calling a type-dependent routine found via a pg_type column; but
that's a task for another day.
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
returns a list of RelOptInfos, eliminating the need for static state
in index_info. That static state was a direct cause of coredumps; if
anything decided to elog(ERROR) partway through an index_info search of
pg_index, the next query would try to close a scan pointer that was
pointing at no-longer-valid memory. Another example of the reasons to
avoid static state variables...
subselects can only appear on the righthand side of a binary operator.
That's still true for quantified predicates like x = ANY (SELECT ...),
but a subselect that delivers a single result can now appear anywhere
in an expression. This is implemented by changing EXPR_SUBLINK sublinks
to represent just the (SELECT ...) expression, without any 'left hand
side' or combining operator --- so they're now more like EXISTS_SUBLINK.
To handle the case of '(x, y, z) = (SELECT ...)', I added a new sublink
type MULTIEXPR_SUBLINK, which acts just like EXPR_SUBLINK used to.
But the grammar will only generate one for a multiple-left-hand-side
row expression.