For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.
There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.
This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.
The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.
This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.
Bump catalog version due to change of state in the catalog
(pg_subscription_rel).
Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com
Currently, we get the origin id from the name and then drop the origin by
taking ExclusiveLock on ReplicationOriginRelationId. So, two concurrent
sessions can get the id from the name at the same time and then when they
try to drop the origin, one of the sessions will get the either
"tuple concurrently deleted" or "cache lookup failed for replication
origin ..".
To prevent this race condition we do the entire operation under lock. This
obviates the need for replorigin_drop() API and we have removed it so if
any extension authors are using it they need to instead use
replorigin_drop_by_name. See it's usage in pg_replication_origin_drop().
Author: Peter Smith
Reviewed-by: Amit Kapila, Euler Taveira, Petr Jelinek, and Alvaro
Herrera
Discussion: https://www.postgresql.org/message-id/CAHut%2BPuW8DWV5fskkMWWMqzt-x7RPcNQOtJQBp6SdwyRghCk7A%40mail.gmail.com
The result of TextDatumGetCString is already palloc'ed so we don't need to
allocate memory for it again. We decide not to backpatch it as there
doesn't seem to be any case where it can create a meaningful leak.
Author: Zhijie Hou
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/229fed2eb8c54c71a96ccb99e516eb12@G08CNEXMBPEKD05.g08.fujitsu.local
To add support for streaming of in-progress transactions into the
built-in logical replication, we need to do three things:
* Extend the logical replication protocol, so identify in-progress
transactions, and allow adding additional bits of information (e.g.
XID of subtransactions).
* Modify the output plugin (pgoutput) to implement the new stream
API callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle streamed
in-progress transaction by spilling the data to disk and then
replaying them on commit.
We however must explicitly disable streaming replication during
replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover we don't have a replication connection open so we
don't have where to send the data anyway.
Author: Tomas Vondra, Dilip Kumar and Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This patch adds a "binary" option to CREATE/ALTER SUBSCRIPTION.
When that's set, the publisher will send data using the data type's
typsend function if any, rather than typoutput. This is generally
faster, if slightly less robust.
As committed, we won't try to transfer user-defined array or composite
types in binary, for fear that type OIDs won't match at the subscriber.
This might be changed later, but it seems like fit material for a
follow-on patch.
Dave Cramer, reviewed by Daniel Gustafsson, Petr Jelinek, and others;
adjusted some by me
Discussion: https://postgr.es/m/CADK3HH+R3xMn=8t3Ct+uD+qJ1KD=Hbif5NFMJ+d5DkoCzp6Vgw@mail.gmail.com
We were acquiring object locks then deleting objects one by one, instead
of acquiring all object locks first, ignoring those that did not exist,
and then deleting all objects together. The latter is the correct
protocol to use, and what this commits changes to code to do. Failing
to follow that leads to "cache lookup failed for relation XYZ" error
reports when DROP OWNED runs concurrently with other DDL -- for example,
a session termination that removes some temp tables.
Author: Álvaro Herrera
Reported-by: Mithun Chicklore Yogendra (Mithun CY)
Reviewed-by: Ahsan Hadi, Tom Lane
Discussion: https://postgr.es/m/CADq3xVZTbzK4ZLKq+dn_vB4QafXXbmMgDP3trY-GuLnib2Ai1w@mail.gmail.com
The need for this was removed by
8b9e9644dc.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
This gives an alternative way of catching exceptions, for the common
case where the cleanup code is the same in the error and non-error
cases. So instead of
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_CATCH();
{
cleanup();
PG_RE_THROW();
}
PG_END_TRY();
cleanup();
one can write
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_FINALLY();
{
cleanup();
}
PG_END_TRY();
Discussion: https://www.postgresql.org/message-id/flat/95a822c3-728b-af0e-d7e5-71890507ae0c%402ndquadrant.com
In commit 18555b132 we tentatively established a rule that regression
tests should use names containing "regression" for databases, and names
starting with "regress_" for all other globally-visible object names, so
as to circumscribe the side-effects that "make installcheck" could have
on an existing installation.
This commit adds a simple enforcement mechanism for that rule: if the code
is compiled with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS defined, it
will emit a warning (not an error) whenever a database, role, tablespace,
subscription, or replication origin name is created that doesn't obey the
rule. Running one or more buildfarm members with that symbol defined
should be enough to catch new violations, at least in the regular
regression tests. Most TAP tests wouldn't notice such warnings, but
that's actually fine because TAP tests don't execute against an existing
server anyway.
Since it's already the case that running src/test/modules/ tests in
installcheck mode is deprecated, we can use that as a home for tests
that seem unsafe to run against an existing server, such as tests that
might have side-effects on existing roles. Document that (though this
commit doesn't in itself make it any less safe than before).
Update regress.sgml to define these restrictions more clearly, and
to clean up assorted lack-of-up-to-date-ness in its descriptions of
the available regression tests.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
We don't actually need the insert-or-update logic, so it's clearer to
have separate functions for the inserting and updating.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This patch makes a number of interrelated changes to reduce the overhead
involved in creating/deleting memory contexts. The key ideas are:
* Include the AllocSetContext header of an aset.c context in its first
malloc request, rather than allocating it separately in TopMemoryContext.
This means that we now always create an initial or "keeper" block in an
aset, even if it never receives any allocation requests.
* Create freelists in which we can save and recycle recently-destroyed
asets (this idea is due to Robert Haas).
* In the common case where the name of a context is a constant string,
just store a pointer to it in the context header, rather than copying
the string.
The first change eliminates a palloc/pfree cycle per context, and
also avoids bloat in TopMemoryContext, at the price that creating
a context now involves a malloc/free cycle even if the context never
receives any allocations. That would be a loser for some common
usage patterns, but recycling short-lived contexts via the freelist
eliminates that pain.
Avoiding copying constant strings not only saves strlen() and strcpy()
overhead, but is an essential part of the freelist optimization because
it makes the context header size constant. Currently we make no
attempt to use the freelist for contexts with non-constant names.
(Perhaps someday we'll need to think harder about that, but in current
usage, most contexts with custom names are long-lived anyway.)
The freelist management in this initial commit is pretty simplistic,
and we might want to refine it later --- but in common workloads that
will never matter because the freelists will never get full anyway.
To create a context with a non-constant name, one is now required to
call AllocSetContextCreateExtended and specify the MEMCONTEXT_COPY_NAME
option. AllocSetContextCreate becomes a wrapper macro, and it includes
a test that will complain about non-string-literal context name
parameters on gcc and similar compilers.
An unfortunate side effect of making AllocSetContextCreate a macro is
that one is now *required* to use the size parameter abstraction macros
(ALLOCSET_DEFAULT_SIZES and friends) with it; the pre-9.6 habit of
writing out individual size parameters no longer works unless you
switch to AllocSetContextCreateExtended.
Internally to the memory-context-related modules, the context creation
APIs are simplified, removing the rather baroque original design whereby
a context-type module called mcxt.c which then called back into the
context-type module. That saved a bit of code duplication, but not much,
and it prevented context-type modules from exercising control over the
allocation of context headers.
In passing, I converted the test-and-elog validation of aset size
parameters into Asserts to save a few more cycles. The original thought
was that callers might compute size parameters on the fly, but in practice
nobody does that, so it's useless to expend cycles on checking those
numbers in production builds.
Also, mark the memory context method-pointer structs "const",
just for cleanliness.
Discussion: https://postgr.es/m/2264.1512870796@sss.pgh.pa.us
When ALTER SUBSCRIPTION DISABLE is run in the same transaction before
DROP SUBSCRIPTION, the latter will hang because workers will still be
running, not having seen the DISABLE committed, and DROP SUBSCRIPTION
will wait until the workers have vacated the replication origin slots.
Previously, DROP SUBSCRIPTION killed the logical replication workers
immediately only if it was going to drop the replication slot, otherwise
it scheduled the worker killing for the end of the transaction, as a
result of 7e174fa793. This, however,
causes the present problem. To fix, kill the workers immediately in all
cases. This covers all cases: A subscription that doesn't have a
replication slot must be disabled. It was either disabled in the same
transaction, or it was already disabled before the current transaction,
but then there shouldn't be any workers left and this won't make a
difference.
Reported-by: Arseny Sher <a.sher@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/87mv6av84w.fsf%40ars-thinkpad
Commit 9915de6c1c changed the default behavior of
DROP_REPLICATION_SLOT so that it would wait until any session holding
the slot active would release it, instead of raising an error. But
users are already depending on the original behavior, so revert to it by
default and add a WAIT option to invoke the new behavior.
Per complaint from Simone Gotti, in
Discussion: https://postgr.es/m/CAEvsy6Wgdf90O6pUvg2wSVXL2omH5OPC-38OD4Zzgk-FXavj3Q@mail.gmail.com
Change to appendStringInfoChar() or appendStringInfoString() where those
can be used.
Author: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Similar to what was fixed in commit 9915de6c1c for replication slots,
but this time it's related to replication origins: DROP SUBSCRIPTION
attempts to drop the replication origin, but that fails if the
replication worker process hasn't yet marked it unused. This causes
failures in the buildfarm:
ERROR: could not drop replication origin with OID 1, in use by PID 34069
Like the aforementioned commit, fix by having the process running DROP
SUBSCRIPTION sleep until the worker marks the the replication origin
struct as free. This uses a condition variable on each replication
origin shmem state struct, so that the session trying to drop can sleep
and expect to be awakened by the process keeping the origin open.
Also fix a SGML markup in the previous commit.
Discussion: https://postgr.es/m/20170808001433.rozlseaf4m2wkw3n@alvherre.pgsql
This avoids "tuple concurrently updated" errors when a ALTER or DROP
SUBSCRIPTION writes to pg_subscription_rel at the same time as a worker.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When a table sync worker is in waiting state and the subscription table
entry is removed because of a concurrent subscription refresh, the
worker could be left orphaned. To avoid that, explicitly stop the
worker when the pg_subscription_rel entry is removed.
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
A logical replication worker should not insert new rows into
pg_subscription_rel, only update existing rows, so that there are no
races if a concurrent refresh removes rows. Adjust the API to be able
to choose that behavior.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
There was a grammar ambiguity between SET PUBLICATION name REFRESH and
SET PUBLICATION SKIP REFRESH, because SKIP is not a reserved word. To
resolve that, fold the refresh choice into the WITH options. Refreshing
is the default now.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
When creating a subscription with slot_name = NONE, we failed to check
that also create_slot = false and enabled = false were set. This
created an invalid subscription and could later lead to a crash if a
NULL slot name was accessed. Add more checks around that for
robustness.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Add some tests for parsing different option combinations. Fix some of
the resulting error messages for recent changes in option naming.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
We used to only check for a supported relkind on the subscriber during
replication, which is needed to ensure that the setup is valid and we
don't crash. But it's also useful to tell the user immediately when
CREATE or ALTER SUBSCRIPTION is executed that the relation being added
to the subscription is not of a supported relkind.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
Peter Eisentraut
Amit Kapila
Bruce Momjian
Tom Lane
Alvaro Herrera
Andres Freund
Peter Eisentraut