Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Previously materializing a slot always returned a HeapTuple. As
current work aims to reduce the reliance on HeapTuples (so other
storage systems can work efficiently), that needs to change. Thus
split the tasks of materializing a slot (i.e. making it independent
from the underlying storage / other memory contexts) from fetching a
HeapTuple from the slot. For brevity, allow to fetch a HeapTuple from
a slot and materializing the slot at the same time, controlled by a
parameter.
For now some callers of ExecFetchSlotHeapTuple, with materialize =
true, expect that changes to the heap tuple will be reflected in the
underlying slot. Those places will be adapted in due course, so while
not pretty, that's OK for now.
Also rename ExecFetchSlotTuple to ExecFetchSlotHeapTupleDatum and
ExecFetchSlotTupleDatum to ExecFetchSlotHeapTupleDatum, as it's likely
that future storage methods will need similar methods. There already
is ExecFetchSlotMinimalTuple, so the new names make the naming scheme
more coherent.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
The tests added in cfa0f4255b to skip
firing an RI trigger if any old key value is NULL can also be applied
for DELETE. This should give a performance gain in those cases, and it
also saves a lot of duplicate code in the actual RI triggers. (That
code was already dead code for the UPDATE cases.)
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Instead of doing a lot of list_nth() accesses to es_range_table,
create a flattened pointer array during executor startup and index
into that to get at individual RangeTblEntrys.
This eliminates one source of O(N^2) behavior with lots of partitions.
(I'm not exactly convinced that it's the most important source, but
it's an easy one to fix.)
Amit Langote and David Rowley
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
It's inefficient to use a single slot for mapping between tuple
descriptors for multiple tuples, as previously done when using
ConvertPartitionTupleSlot(), as that means the slot's tuple descriptors
change for every tuple.
Previously we also, via ConvertPartitionTupleSlot(), built new tuples
after the mapping even in cases where we, immediately afterwards,
access individual columns again.
Refactor the code so one slot, on demand, is used for each
partition. That avoids having to change the descriptor (and allows to
use the more efficient "fixed" tuple slots). Then use slot->slot
mapping, to avoid unnecessarily forming a tuple.
As the naming between the tuple and slot mapping functions wasn't
consistent, rename them to execute_attr_map_{tuple,slot}. It's likely
that we'll also rename convert_tuples_by_* to denote that these
functions "only" build a map, but that's left for later.
Author: Amit Khandekar and Amit Langote, editorialized by me
Reviewed-By: Amit Langote, Amit Khandekar, Andres Freund
Discussion:
https://postgr.es/m/CAJ3gD9fR0wRNeAE8VqffNTyONS_UfFPRpqxhnD9Q42vZB+Jvpg@mail.gmail.comhttps://postgr.es/m/e4f9d743-cd4b-efb0-7574-da21d86a7f36%40lab.ntt.co.jp
Backpatch: -
Add RangeTblEntry.rellockmode, which records the appropriate lock mode for
each RTE_RELATION rangetable entry (either AccessShareLock, RowShareLock,
or RowExclusiveLock depending on the RTE's role in the query).
This patch creates the field and makes all creators of RTE nodes fill it
in reasonably, but for the moment nothing much is done with it. The plan
is to replace assorted post-parser logic that re-determines the right
lockmode to use with simple uses of rte->rellockmode. For now, just add
Asserts in each of those places that the rellockmode matches what they are
computing today. (In some cases the match isn't perfect, so the Asserts
are weaker than you might expect; but this seems OK, as per discussion.)
This passes check-world for me, but it seems worth pushing in this state
to see if the buildfarm finds any problems in cases I failed to test.
catversion bump due to change of stored rules.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Upcoming changes introduce further types of tuple table slots, in
preparation of making table storage pluggable. New storage methods
will have different representation of tuples, therefore the slot
accessor should refer explicitly to heap tuples.
Instead of just renaming the functions, split it into one function
that accepts heap tuples not residing in buffers, and one accepting
ones in buffers. Previously one function was used for both, but that
was a bit awkward already, and splitting will allow us to represent
slot types for tuples in buffers and normal memory separately.
This is split out from the patch introducing abstract slots, as this
largely consists out of mechanical changes.
Author: Ashutosh Bapat
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
Ensure that triggers get properly filled in tuples for the OLD value.
Also fix the logic of detecting missing null values. The previous logic
failed to detect a missing null column before the first missing column
with a default. Fixing this has simplified the logic a bit.
Regression tests are added to test changes. This should ensure better
coverage of expand_tuple().
Original bug reports, and some code and test scripts from Tomas Vondra
Backpatch to release 11.
An update that causes the tuple to be moved to a different partition was
missing out on re-constructing the to-be-updated tuple, based on the latest
tuple in the update chain. Instead, it's simply deleting the latest tuple
and inserting a new tuple in the new partition based on the old tuple.
Commit 2f17844104 didn't consider this case, so some of the updates were
getting lost.
In passing, change the argument order for output parameter in ExecDelete
and add some commentary about it.
Reported-by: Pavan Deolasee
Author: Amit Khandekar, with minor changes by me
Reviewed-by: Dilip Kumar, Amit Kapila and Alvaro Herrera
Backpatch-through: 11
Discussion: https://postgr.es/m/CAJ3gD9fRbEzDqdeDq1jxqZUb47kJn+tQ7=Bcgjc8quqKsDViKQ@mail.gmail.com
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
When an update moves a row between partitions (supported since
2f17844104), our normal logic for following update chains in READ
COMMITTED mode doesn't work anymore. Cross partition updates are
modeled as an delete from the old and insert into the new
partition. No ctid chain exists across partitions, and there's no
convenient space to introduce that link.
Not throwing an error in a partitioned context when one would have
been thrown without partitioning is obviously problematic. This commit
introduces infrastructure to detect when a tuple has been moved, not
just plainly deleted. That allows to throw an error when encountering
a deletion that's actually a move, while attempting to following a
ctid chain.
The row deleted as part of a cross partition update is marked by
pointing it's t_ctid to an invalid block, instead of self as a normal
update would. That was deemed to be the least invasive and most
future proof way to represent the knowledge, given how few infomask
bits are there to be recycled (there's also some locking issues with
using infomask bits).
External code following ctid chains should be updated to check for
moved tuples. The most likely consequence of not doing so is a missed
error.
Author: Amul Sul, editorialized by me
Reviewed-By: Amit Kapila, Pavan Deolasee, Andres Freund, Robert Haas
Discussion: http://postgr.es/m/CAAJ_b95PkwojoYfz0bzXU8OokcTVGzN6vYGCNVUukeUDrnF3dw@mail.gmail.com
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Review comments from Andres Freund
* Consolidate code into AfterTriggerGetTransitionTable()
* Rename nodeMerge.c to execMerge.c
* Rename nodeMerge.h to execMerge.h
* Move MERGE handling in ExecInitModifyTable()
into a execMerge.c ExecInitMerge()
* Move mt_merge_subcommands flags into execMerge.h
* Rename opt_and_condition to opt_merge_when_and_condition
* Wordsmith various comments
Author: Pavan Deolasee
Reviewer: Simon Riggs
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
A followup patch will add a SKIP_LOCKED option. To avoid introducing
evermore arguments, breaking existing callers each time, introduce a
flags argument. This'll no doubt break a few external users...
Also change the MISSING_OK behaviour so a DEBUG1 debug message is
emitted when a relation is not found.
Author: Nathan Bossart
Reviewed-By: Michael Paquier and Andres Freund
Discussion: https://postgr.es/m/20180306005349.b65whmvj7z6hbe2y@alap3.anarazel.de
Previously, FOR EACH ROW triggers were not allowed in partitioned
tables. Now we allow AFTER triggers on them, and on trigger creation we
cascade to create an identical trigger in each partition. We also clone
the triggers to each partition that is created or attached later.
This means that deferred unique keys are allowed on partitioned tables,
too.
Author: Álvaro Herrera
Reviewed-by: Peter Eisentraut, Simon Riggs, Amit Langote, Robert Haas,
Thomas Munro
Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
A before-update row trigger may choose to return the "new" or "old" tuple
unmodified. ExecBRUpdateTriggers failed to consider the second
possibility, and would proceed to free the "old" tuple even if it was the
one returned, leading to subsequent access to already-deallocated memory.
In debug builds this reliably leads to an "invalid memory alloc request
size" failure; in production builds it might accidentally work, but data
corruption is also possible.
This is a very old bug. There are probably a couple of reasons it hasn't
been noticed up to now. It would be more usual to return NULL if one
wanted to suppress the update action; returning "old" is significantly less
efficient since the update will occur anyway. Also, none of the standard
PLs would ever cause this because they all returned freshly-manufactured
tuples even if they were just copying "old". But commit 4b93f5799 changed
that for plpgsql, making it possible to see the bug with a plpgsql trigger.
Still, this is certainly legal behavior for a trigger function, so it's
ExecBRUpdateTriggers's fault not plpgsql's.
It seems worth creating a test case that exercises returning "old" directly
with a C-language trigger; testing this through plpgsql seems unreliable
because its behavior might change again.
Report and fix by Rushabh Lathia; regression test case by me.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGPqQf1P4pjiNPrMof=P_16E-DFjt457j+nH2ex3=nBTew7tXw@mail.gmail.com
The reason for doing so is that it will allow expression evaluation to
optimize based on the underlying tupledesc. In particular it will
allow to JIT tuple deforming together with the expression itself.
For that expression initialization needs to be moved after the
relevant slots are initialized - mostly unproblematic, except in the
case of nodeWorktablescan.c.
After doing so there's no need for ExecAssignResultType() and
ExecAssignResultTypeFromTL() anymore, as all former callers have been
converted to create a slot with a fixed descriptor.
When creating a slot with a fixed descriptor, tts_values/isnull can be
allocated together with the main slot, reducing allocation overhead
and increasing cache density a bit.
Author: Andres Freund
Discussion: https://postgr.es/m/20171206093717.vqdxe5icqttpxs3p@alap3.anarazel.de
When an UPDATE causes a row to no longer match the partition
constraint, try to move it to a different partition where it does
match the partition constraint. In essence, the UPDATE is split into
a DELETE from the old partition and an INSERT into the new one. This
can lead to surprising behavior in concurrency scenarios because
EvalPlanQual rechecks won't work as they normally did; the known
problems are documented. (There is a pending patch to improve the
situation further, but it needs more review.)
Amit Khandekar, reviewed and tested by Amit Langote, David Rowley,
Rajkumar Raghuwanshi, Dilip Kumar, Amul Sul, Thomas Munro, Álvaro
Herrera, Amit Kapila, and me. A few final revisions by me.
Discussion: http://postgr.es/m/CAJ3gD9do9o2ccQ7j7+tSgiE1REY65XRiMb=yJO3u3QhyP8EEPQ@mail.gmail.com
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
resowner/README contained advice to use a PG_TRY block to restore the
old CurrentResourceOwner value anywhere that that variable is transiently
changed. That advice was only inconsistently followed, however, and
on reflection it seems like unnecessary overhead. We don't bother
with such a convention for transient CurrentMemoryContext changes,
on the grounds that any (sub)transaction abort will start out by
resetting CurrentMemoryContext to what it wants. But the same is
true of CurrentResourceOwner, so there seems no need to treat it
differently.
Hence, remove PG_TRY blocks that exist only to restore CurrentResourceOwner
before re-throwing the error. There are a couple of places that restore
it along with some other actions, and I left those alone; the restore is
probably unnecessary but no noticeable gain will result from removing it.
Discussion: https://postgr.es/m/5236.1507583529@sss.pgh.pa.us
AfterTriggerEndQuery correctly notes that the query_stack could get
repalloc'd during a trigger firing, but it nonetheless passes the address
of a query_stack entry to afterTriggerInvokeEvents, so that if such a
repalloc occurs, afterTriggerInvokeEvents is already working with an
obsolete dangling pointer while it scans the rest of the events. Oops.
The only code at risk is its "delete_ok" cleanup code, so we can
prevent unsafe behavior by passing delete_ok = false instead of true.
However, that could have a significant performance penalty, because the
point of passing delete_ok = true is to not have to re-scan possibly
a large number of dead trigger events on the next time through the loop.
There's more than one way to skin that cat, though. What we can do is
delete all the "chunks" in the event list except the last one, since
we know all events in them must be dead. Deleting the chunks is work
we'd have had to do later in AfterTriggerEndQuery anyway, and it ends
up saving rescanning of just about the same events we'd have gotten
rid of with delete_ok = true.
In v10 and HEAD, we also have to be careful to mop up any per-table
after_trig_events pointers that would become dangling. This is slightly
annoying, but I don't think that normal use-cases will traverse this code
path often enough for it to be a performance problem.
It's pretty hard to hit this in practice because of the unlikelihood
of the query_stack getting resized at just the wrong time. Nonetheless,
it's definitely a live bug of ancient standing, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/2891.1505419542@sss.pgh.pa.us
Commit 0f79440fb introduced mechanism to keep AFTER STATEMENT triggers
from firing more than once per statement, which was formerly possible
if more than one FK enforcement action had to be applied to a given
table. Add a similar mechanism for BEFORE STATEMENT triggers, so that
we don't have the unexpected situation of firing BEFORE STATEMENT
triggers more often than AFTER STATEMENT.
As with the previous patch, back-patch to v10.
Discussion: https://postgr.es/m/22315.1505584992@sss.pgh.pa.us
The standard says that all changes of the same kind (insert, update, or
delete) caused in one table by a single SQL statement should be reported
in a single transition table; and by that, they mean to include foreign key
enforcement actions cascading from the statement's direct effects. It's
also reasonable to conclude that if the standard had wCTEs, they would say
that effects of wCTEs applying to the same table as each other or the outer
statement should be merged into one transition table. We weren't doing it
like that.
Hence, arrange to merge tuples from multiple update actions into a single
transition table as much as we can. There is a problem, which is that if
the firing of FK enforcement triggers and after-row triggers with
transition tables is interspersed, we might need to report more tuples
after some triggers have already seen the transition table. It seems like
a bad idea for the transition table to be mutable between trigger calls.
There's no good way around this without a major redesign of the FK logic,
so for now, resolve it by opening a new transition table each time this
happens.
Also, ensure that AFTER STATEMENT triggers fire just once per statement,
or once per transition table when we're forced to make more than one.
Previous versions of Postgres have allowed each FK enforcement query
to cause an additional firing of the AFTER STATEMENT triggers for the
referencing table, but that's certainly not per spec. (We're still
doing multiple firings of BEFORE STATEMENT triggers, though; is that
something worth changing?)
Also, forbid using transition tables with column-specific UPDATE triggers.
The spec requires such transition tables to show only the tuples for which
the UPDATE trigger would have fired, which means maintaining multiple
transition tables or else somehow filtering the contents at readout.
Maybe someday we'll bother to support that option, but it looks like a
lot of trouble for a marginal feature.
The transition tables are now managed by the AfterTriggers data structures,
rather than being directly the responsibility of ModifyTable nodes. This
removes a subtransaction-lifespan memory leak introduced by my previous
band-aid patch 3c4359521.
In passing, refactor the AfterTriggers data structures to reduce the
management overhead for them, by using arrays of structs rather than
several parallel arrays for per-query-level and per-subtransaction state.
I failed to resist the temptation to do some copy-editing on the SGML
docs about triggers, above and beyond merely documenting the effects
of this patch.
Back-patch to v10, because we don't want the semantics of transition
tables to change post-release.
Patch by me, with help and review from Thomas Munro.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
AFTER triggers using transition tables crashed if they were fired due
to a foreign key ON CASCADE update. This is because ExecEndModifyTable
flushes the transition tables, on the assumption that any trigger that
could need them was already fired during ExecutorFinish. Normally
that's true, because we don't allow transition-table-using triggers
to be deferred. However, foreign key CASCADE updates force any
triggers on the referencing table to be deferred to the outer query
level, by means of the EXEC_FLAG_SKIP_TRIGGERS flag. I don't recall
all the details of why it's like that and am pretty loath to redesign
it right now. Instead, just teach ExecEndModifyTable to skip destroying
the TransitionCaptureState when that flag is set. This will allow the
transition table data to survive until end of the current subtransaction.
This isn't a terribly satisfactory solution, because (1) we might be
leaking the transition tables for much longer than really necessary,
and (2) as things stand, an AFTER STATEMENT trigger will fire once per
RI updating query, ie once per row updated or deleted in the referenced
table. I suspect that is not per SQL spec. But redesigning this is a
research project that we're certainly not going to get done for v10.
So let's go with this hackish answer for now.
In passing, tweak AfterTriggerSaveEvent to not save the transition_capture
pointer into the event record for a deferrable trigger. This is not
necessary to fix the current bug, but it avoids letting dangling pointers
to long-gone transition tables persist in the trigger event queue. That's
at least a safety feature. It might also allow merging shared trigger
states in more cases than before.
I added a regression test that demonstrates the crash on unpatched code,
and also exposes the behavior of firing the AFTER STATEMENT triggers
once per row update.
Per bug #14808 from Philippe Beaudoin. Back-patch to v10.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
We now disallow having triggers with both transition tables and ON
INSERT OR UPDATE (which was a PG extension to the spec anyway),
because in this case it's not at all clear how the transition tables
should work for an INSERT ... ON CONFLICT query. Separate ON INSERT
and ON UPDATE triggers with transition tables are allowed, and the
transition tables for these reflect only the inserted and only the
updated tuples respectively.
Patch by Thomas Munro
Discussion: https://postgr.es/m/CAEepm%3D11KHQ0JmETJQihSvhZB5mUZL2xrqHeXbCeLhDiqQ39%3Dw%40mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
This replaces the old, recursive tree-walk based evaluation, with
non-recursive, opcode dispatch based, expression evaluation.
Projection is now implemented as part of expression evaluation.
This both leads to significant performance improvements, and makes
future just-in-time compilation of expressions easier.
The speed gains primarily come from:
- non-recursive implementation reduces stack usage / overhead
- simple sub-expressions are implemented with a single jump, without
function calls
- sharing some state between different sub-expressions
- reduced amount of indirect/hard to predict memory accesses by laying
out operation metadata sequentially; including the avoidance of
nearly all of the previously used linked lists
- more code has been moved to expression initialization, avoiding
constant re-checks at evaluation time
Future just-in-time compilation (JIT) has become easier, as
demonstrated by released patches intended to be merged in a later
release, for primarily two reasons: Firstly, due to a stricter split
between expression initialization and evaluation, less code has to be
handled by the JIT. Secondly, due to the non-recursive nature of the
generated "instructions", less performance-critical code-paths can
easily be shared between interpreted and compiled evaluation.
The new framework allows for significant future optimizations. E.g.:
- basic infrastructure for to later reduce the per executor-startup
overhead of expression evaluation, by caching state in prepared
statements. That'd be helpful in OLTPish scenarios where
initialization overhead is measurable.
- optimizing the generated "code". A number of proposals for potential
work has already been made.
- optimizing the interpreter. Similarly a number of proposals have
been made here too.
The move of logic into the expression initialization step leads to some
backward-incompatible changes:
- Function permission checks are now done during expression
initialization, whereas previously they were done during
execution. In edge cases this can lead to errors being raised that
previously wouldn't have been, e.g. a NULL array being coerced to a
different array type previously didn't perform checks.
- The set of domain constraints to be checked, is now evaluated once
during expression initialization, previously it was re-built
every time a domain check was evaluated. For normal queries this
doesn't change much, but e.g. for plpgsql functions, which caches
ExprStates, the old set could stick around longer. The behavior
around might still change.
Author: Andres Freund, with significant changes by Tom Lane,
changes by Heikki Linnakangas
Reviewed-By: Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
This extends the work done in commit 2f5c9d9c9 to provide a more nearly
complete abstraction layer hiding the details of index updating for catalog
changes. That commit only invented abstractions for catalog inserts and
updates, leaving nearby code for catalog deletes still calling the
heap-level routines directly. That seems rather ugly from here, and it
does little to help if we ever want to shift to a storage system in which
indexing work is needed at delete time.
Hence, create a wrapper function CatalogTupleDelete(), and replace calls
of simple_heap_delete() on catalog tuples with it. There are now very
few direct calls of [simple_]heap_delete remaining in the tree.
Discussion: https://postgr.es/m/462.1485902736@sss.pgh.pa.us
Split the existing CatalogUpdateIndexes into two different routines,
CatalogTupleInsert and CatalogTupleUpdate, which do both the heap
insert/update plus the index update. This removes over 300 lines of
boilerplate code all over src/backend/catalog/ and src/backend/commands.
The resulting code is much more pleasing to the eye.
Also, by encapsulating what happens in detail during an UPDATE, this
facilitates the upcoming WARM patch, which is going to add a few more
lines to the update case making the boilerplate even more boring.
The original CatalogUpdateIndexes is removed; there was only one use
left, and since it's just three lines, we can as well expand it in place
there. We could keep it, but WARM is going to break all the UPDATE
out-of-core callsites anyway, so there seems to be no benefit in doing
so.
Author: Pavan Deolasee
Discussion: https://www.postgr.es/m/CABOikdOcFYSZ4vA2gYfs=M2cdXzXX4qGHeEiW3fu9PCfkHLa2A@mail.gmail.com
We've accumulated quite a bit of stuff with which pgindent is not
quite happy in this code; clean it up to provide a less-annoying base
for future pgindent runs.
This avoids additional translatable strings for each distinct type, as
well as making our quoting style around type names more consistent
(namely, that we don't quote type names). This continues what started
as f402b99501.
Discussion: https://postgr.es/m/20160401170642.GA57509@alvherre.pgsql
This patch makes several changes that improve the consistency of
representation of lists of statements. It's always been the case
that the output of parse analysis is a list of Query nodes, whatever
the types of the individual statements in the list. This patch brings
similar consistency to the outputs of raw parsing and planning steps:
* The output of raw parsing is now always a list of RawStmt nodes;
the statement-type-dependent nodes are one level down from that.
* The output of pg_plan_queries() is now always a list of PlannedStmt
nodes, even for utility statements. In the case of a utility statement,
"planning" just consists of wrapping a CMD_UTILITY PlannedStmt around
the utility node. This list representation is now used in Portal and
CachedPlan plan lists, replacing the former convention of intermixing
PlannedStmts with bare utility-statement nodes.
Now, every list of statements has a consistent head-node type depending
on how far along it is in processing. This allows changing many places
that formerly used generic "Node *" pointers to use a more specific
pointer type, thus reducing the number of IsA() tests and casts needed,
as well as improving code clarity.
Also, the post-parse-analysis representation of DECLARE CURSOR is changed
so that it looks more like EXPLAIN, PREPARE, etc. That is, the contained
SELECT remains a child of the DeclareCursorStmt rather than getting flipped
around to be the other way. It's now true for both Query and PlannedStmt
that utilityStmt is non-null if and only if commandType is CMD_UTILITY.
That allows simplifying a lot of places that were testing both fields.
(I think some of those were just defensive programming, but in many places,
it was actually necessary to avoid confusing DECLARE CURSOR with SELECT.)
Because PlannedStmt carries a canSetTag field, we're also able to get rid
of some ad-hoc rules about how to reconstruct canSetTag for a bare utility
statement; specifically, the assumption that a utility is canSetTag if and
only if it's the only one in its list. While I see no near-term need for
relaxing that restriction, it's nice to get rid of the ad-hocery.
The API of ProcessUtility() is changed so that what it's passed is the
wrapper PlannedStmt not just the bare utility statement. This will affect
all users of ProcessUtility_hook, but the changes are pretty trivial; see
the affected contrib modules for examples of the minimum change needed.
(Most compilers should give pointer-type-mismatch warnings for uncorrected
code.)
There's also a change in the API of ExplainOneQuery_hook, to pass through
cursorOptions instead of expecting hook functions to know what to pick.
This is needed because of the DECLARE CURSOR changes, but really should
have been done in 9.6; it's unlikely that any extant hook functions
know about using CURSOR_OPT_PARALLEL_OK.
Finally, teach gram.y to save statement boundary locations in RawStmt
nodes, and pass those through to Query and PlannedStmt nodes. This allows
more intelligent handling of cases where a source query string contains
multiple statements. This patch doesn't actually do anything with the
information, but a follow-on patch will. (Passing this information through
cleanly is the true motivation for these changes; while I think this is all
good cleanup, it's unlikely we'd have bothered without this end goal.)
catversion bump because addition of location fields to struct Query
affects stored rules.
This patch is by me, but it owes a good deal to Fabien Coelho who did
a lot of preliminary work on the problem, and also reviewed the patch.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1612200926310.29821@lancre
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
This is infrastructure for the complete SQL standard feature. No
support is included at this point for execution nodes or PLs. The
intent is to add that soon.
As this patch leaves things, standard syntax can create tuplestores
to contain old and/or new versions of rows affected by a statement.
References to these tuplestores are in the TriggerData structure.
C triggers can access the tuplestores directly, so they are usable,
but they cannot yet be referenced within a SQL statement.
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
Our actual convention, contrary to what I said in 59a2111b23, is not to
quote type names, as evidenced by unquoted use of format_type_be()
result value in error messages. Remove quotes from recently tweaked
messages accordingly.
Per note from Tom Lane
Change the slightly different variations of the message
function FOO must return type BAR
to a single wording, removing the variability in type name so that they
all create a single translation entry; since the type name is not to be
translated, there's no point in it being part of the message anyway.
Also, change them all to use the same quoting convention, namely that
the function name is not to be quoted but the type name is. (I'm not
quite sure why this is so, but it's the clear majority.)
Some similar messages such as "encoding conversion function FOO must ..."
are also changed.
In commit 1d97c19a0f and later c1d9579dd8, we extended
pull_var_clause's API by adding enum-type arguments. That's sort of a pain
to maintain, though, because it means every time we add a new behavior we
must touch every last one of the call sites, even if there's a reasonable
default behavior that most of them could use. Let's switch over to using a
bitmask of flags, instead; that seems more maintainable and might save a
nanosecond or two as well. This commit changes no behavior in itself,
though I'm going to follow it up with one that does add a new behavior.
In passing, remove flatten_tlist(), which has not been used since 9.1
and would otherwise need the same API changes.
Removing these enums means that optimizer/tlist.h no longer needs to
depend on optimizer/var.h. Changing that caused a number of C files to
need addition of #include "optimizer/var.h" (probably we can thank old
runs of pgrminclude for that); but on balance it seems like a good change
anyway.
A pending patch requires exporting a function returning Bitmapset from
catalog/pg_constraint.c. As things stand, that would mean including
nodes/bitmapset.h in pg_constraint.h, which might be hazardous for the
client-side includability of that header. It's not entirely clear whether
any client-side code needs to include pg_constraint.h, but it seems prudent
to assume that there is some such code somewhere. Therefore, split off the
function definitions into a new file pg_constraint_fn.h, similarly to what
we've done for some other catalog header files.
This fixes a bunch of somewhat pedantic warnings with new
compilers. Since by far the majority of other functions definitions use
the (void) style it just seems to be consistent to do so as well in the
remaining few places.
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
Previously, relation range table entries used a single Bitmapset field
representing which columns required either UPDATE or INSERT privileges,
despite the fact that INSERT and UPDATE privileges are separately
cataloged, and may be independently held. As statements so far required
either insert or update privileges but never both, that was
sufficient. The required permission could be inferred from the top level
statement run.
The upcoming INSERT ... ON CONFLICT UPDATE feature needs to
independently check for both privileges in one statement though, so that
is not sufficient anymore.
Bumps catversion as stored rules change.
Author: Peter Geoghegan
Reviewed-By: Andres Freund
Reduce lock levels to ShareRowExclusive for the following SQL
CREATE TRIGGER (but not DROP or ALTER)
ALTER TABLE ENABLE TRIGGER
ALTER TABLE DISABLE TRIGGER
ALTER TABLE … ADD CONSTRAINT FOREIGN KEY
Original work by Simon Riggs, extracted and refreshed by Andreas Karlsson
New test cases added by Andreas Karlsson
Reviewed by Noah Misch, Andres Freund, Michael Paquier and Simon Riggs
The changed routines are mostly those that can be directly called by
ProcessUtilitySlow; the intention is to make the affected object
information more precise, in support for future event trigger changes.
Originally it was envisioned that the OID of the affected object would
be enough, and in most cases that is correct, but upon actually
implementing the event trigger changes it turned out that ObjectAddress
is more widely useful.
Additionally, some command execution routines grew an output argument
that's an object address which provides further info about the executed
command. To wit:
* for ALTER DOMAIN / ADD CONSTRAINT, it corresponds to the address of
the new constraint
* for ALTER OBJECT / SET SCHEMA, it corresponds to the address of the
schema that originally contained the object.
* for ALTER EXTENSION {ADD, DROP} OBJECT, it corresponds to the address
of the object added to or dropped from the extension.
There's no user-visible change in this commit, and no functional change
either.
Discussion: 20150218213255.GC6717@tamriel.snowman.net
Reviewed-By: Stephen Frost, Andres Freund
While building error messages to return to the user,
BuildIndexValueDescription, ExecBuildSlotValueDescription and
ri_ReportViolation would happily include the entire key or entire row in
the result returned to the user, even if the user didn't have access to
view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription
and ExecBuildSlotValueDescription. Note that, for key cases, the user
must have access to all of the columns for the key to be shown; a
partial key will not be returned.
Further, in master only, do not return any data for cases where row
security is enabled on the relation and row security should be applied
for the user. This required a bit of refactoring and moving of things
around related to RLS- note the addition of utils/misc/rls.c.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
Testing reveals that the memory allocation we do at transaction start
has small but measurable overhead on simple transactions. To cut
down on that overhead, defer some of that work to the point when
AFTER triggers are first used, thus avoiding it altogether if they
never are.
Patch by me. Review by Andres Freund.
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
This covers all the SQL-standard trigger types supported for regular
tables; it does not cover constraint triggers. The approach for
acquiring the old row mirrors that for view INSTEAD OF triggers. For
AFTER ROW triggers, we spool the foreign tuples to a tuplestore.
This changes the FDW API contract; when deciding which columns to
populate in the slot returned from data modification callbacks, writable
FDWs will need to check for AFTER ROW triggers in addition to checking
for a RETURNING clause.
In support of the feature addition, refactor the TriggerFlags bits and
the assembly of old tuples in ModifyTable.
Ronan Dunklau, reviewed by KaiGai Kohei; some additional hacking by me.
If the name lookups come to different conclusions due to concurrent
activity, we might perform some parts of the DDL on a different table
than other parts. At least in the case of CREATE INDEX, this can be
used to cause the permissions checks to be performed against a
different table than the index creation, allowing for a privilege
escalation attack.
This changes the calling convention for DefineIndex, CreateTrigger,
transformIndexStmt, transformAlterTableStmt, CheckIndexCompatible
(in 9.2 and newer), and AlterTable (in 9.1 and older). In addition,
CheckRelationOwnership is removed in 9.2 and newer and the calling
convention is changed in older branches. A field has also been added
to the Constraint node (FkConstraint in 8.4). Third-party code calling
these functions or using the Constraint node will require updating.
Report by Andres Freund. Patch by Robert Haas and Andres Freund,
reviewed by Tom Lane.
Security: CVE-2014-0062
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
Make slightly better decisions about indentation than what pgindent
is capable of. Mostly breaking out long function calls into one
line per argument, with a few other minor adjustments.
No functional changes- all whitespace.
pgindent ran cleanly (didn't change anything) after.
Passes all regressions.
Choose a saner ordering of parameters (adding a new input param after
the output params seemed a bit random), update the function's header
comment to match reality (cmon folks, is this really that hard?),
get rid of useless and sloppily-defined distinction between
PROCESS_UTILITY_SUBCOMMAND and PROCESS_UTILITY_GENERATED.
Andres Freund
Peter Eisentraut
Tom Lane
Andrew Dunstan
Amit Kapila
Alvaro Herrera
Simon Riggs
Teodor Sigaev
Robert Haas
Bruce Momjian
Andrew Gierth
Kevin Grittner
Noah Misch
Stephen Frost