In assert-enabled builds, we assert during the shutdown sequence that
the queues have been properly emptied, and during process startup that
we are inheriting empty queues. In non-assert enabled builds, we just
save a few cycles.
This allows us to give correct syntax error pointers when complaining
about ungrouped variables in a join query with aggregates or GROUP BY.
It's pretty much irrelevant for the planner's use of the function, though
perhaps it might aid debugging sometimes.
If a tuple in a syscache contains an out-of-line toasted field, and we
try to fetch that field shortly after some other transaction has committed
an update or deletion of the tuple, there is a race condition: vacuum
could come along and remove the toast tuples before we can fetch them.
This leads to transient failures like "missing chunk number 0 for toast
value NNNNN in pg_toast_2619", as seen in recent reports from Andrew
Hammond and Tim Uckun.
The design idea of syscache is that access to stale syscache entries
should be prevented by relation-level locks, but that fails for at least
two cases where toasted fields are possible: ANALYZE updates pg_statistic
rows without locking out sessions that might want to plan queries on the
same table, and CREATE OR REPLACE FUNCTION updates pg_proc rows without
any meaningful lock at all.
The least risky fix seems to be an idea that Heikki suggested when we
were dealing with a related problem back in August: forcibly detoast any
out-of-line fields before putting a tuple into syscache in the first place.
This avoids the problem because at the time we fetch the parent tuple from
the catalog, we should be holding an MVCC snapshot that will prevent
removal of the toast tuples, even if the parent tuple is outdated
immediately after we fetch it. (Note: I'm not convinced that this
statement holds true at every instant where we could be fetching a syscache
entry at all, but it does appear to hold true at the times where we could
fetch an entry that could have a toasted field. We will need to be a bit
wary of adding toast tables to low-level catalogs that don't have them
already.) An additional benefit is that subsequent uses of the syscache
entry should be faster, since they won't have to detoast the field.
Back-patch to all supported versions. The problem is significantly harder
to reproduce in pre-9.0 releases, because of their willingness to flush
every entry in a syscache whenever the underlying catalog is vacuumed
(cf CatalogCacheFlushRelation); but there is still a window for trouble.
bgwriter is now a much less important process, responsible for page
cleaning duties only. checkpointer is now responsible for checkpoints
and so has a key role in shutdown. Later patches will correct doc
references to the now old idea that bgwriter performs checkpoints.
Has beneficial effect on performance at high write rates, but mainly
refactoring to more easily allow changes for power reduction by
simplifying previously tortuous code around required to allow page
cleaning and checkpointing to time slice in the same process.
Patch by me, Review by Dickson Guedes
The existing scan-direction-sensitive tests were overly complex, and
failed to stop the scan in cases where it's perfectly legitimate to do so.
Per bug #6278 from Maksym Boguk.
Back-patch to 8.3, which is as far back as the patch applies easily.
Doesn't seem worth sweating over a relatively minor performance issue in
8.2 at this late date. (But note that this was a performance regression
from 8.1 and before, so 8.2 is being left as an outlier.)
The POSIX spec defines locale fields for controlling the ordering of the
value, sign, and currency symbol in monetary output, but cash_out only
supported a small subset of these options. Fully implement p/n_sign_posn,
p/n_cs_precedes, and p/n_sep_by_space per spec. Fix up cash_in so that
it will accept all these format variants.
Also, make sure that thousands_sep is only inserted to the left of the
decimal point, as required by spec.
Per bug #6144 from Eduard Kracmar and discussion of bug #6277. This patch
includes some ideas from Alexander Lakhin's proposed patch, though it is
very different in detail.
Make sure that it considers all the possibilities that the old code did,
instead of trying only one possibility per character position. To keep the
runtime in bounds, instead tweak the character incrementers to not try
every possible multibyte character code. Remove unnecessary logic to
restore the old character value on failure. Additional comment and
formatting cleanup.
cash_out failed to handle multiple-byte thousands separators, as per bug
#6277 from Alexander Law. In addition, cash_in didn't handle that either,
nor could it handle multiple-byte positive_sign. Both routines failed to
support multiple-byte mon_decimal_point, which I did not think was worth
changing, but at least now they check for the possibility and fall back to
using '.' rather than emitting invalid output. Also, make cash_in handle
trailing negative signs, which formerly it would reject. Since cash_out
generates trailing negative signs whenever the locale tells it to, this
last omission represents a fail-to-reload-dumped-data bug. IMO that
justifies patching this all the way back.
This infrastructure doesn't in any way guarantee that the character
we produce will sort before the one we incremented; but it does at least
make it much more likely that we'll end up with something that is a valid
character, which improves our chances.
Kyotaro Horiguchi, with various adjustments by me.
We need not wait until the commit record is durably on disk, because
in the event of a crash the page we're updating with hint bits will
be gone anyway. Per off-list report from Heikki Linnakangas, this
can significantly degrade the performance of unlogged tables; I was
able to show a 2x speedup from this patch on a pgbench run with scale
factor 15. In practice, this will mostly help small, heavily updated
tables, because on larger tables you're unlikely to run into the same
row again before the commit record makes it out to disk.
Make sure ecpg/include/ is rebuilt before the other subdirectories,
so that ecpg_config.h is up to date. This is not likely to matter
during production builds, only development, so no back-patch.
one lock per backend or auxiliary process - the need for a lock for each
aux processes was not accounted for in NumLWLocks(). No-one noticed,
because the three locks needed for the three aux processes fit into the
few extra lwlocks we allocate for 3rd party modules that don't call
RequestAddinLWLocks() (NUM_USER_DEFINED_LWLOCKS, 4 by default).
The original implementation of ELSIF in plpgsql converted the construct
into nested simple IF statements. This was prone to stack overflow with
long ELSIF lists, in two different ways. First, it's difficult to generate
the parsetree without using right-recursion in the bison grammar, and
that's prone to parser stack overflow since nothing can be reduced until
the whole list has been read. Second, we'd recurse during execution, thus
creating an unnecessary risk of execution-time stack overflow. Rewrite
so that the ELSIF list is represented as a flat list, scanned via iteration
not recursion, and generated through left-recursion in the grammar.
Per a gripe from Håvard Kongsgård.
We should generally use left-recursion not right-recursion to parse lists.
Bison hasn't got any built-in way to check for this type of inefficiency,
and I didn't find anything on the net in a quick search, so I wrote a
little Perl script to do it. Add to src/tools/ so we don't have to
re-invent this wheel next time we wonder if we're doing anything stupid.
Currently, the only place that seems to need fixing is plpgsql's stmt_else
production, so the problem doesn't appear to be common enough to warrant
trying to include such a test in our standard build process. If we did
want to do that, we'd need a way to ignore some false positives, such as
a_expr := '-' a_expr
If the right-hand side of a semijoin is unique, then we can treat it like a
normal join (or another way to say that is: we don't need to explicitly
unique-ify the data before doing it as a normal join). We were recognizing
such cases when the RHS was a sub-query with appropriate DISTINCT or GROUP
BY decoration, but there's another way: if the RHS is a plain relation with
unique indexes, we can check if any of the indexes prove the output is
unique. Most of the infrastructure for that was there already in the join
removal code, though I had to rearrange it a bit. Per reflection about a
recent example in pgsql-performance.
Add option for parallel streaming of the transaction log while a
base backup is running, to get the logfiles before the server has
removed them.
Also add a tool called pg_receivexlog, which streams the transaction
log into files, creating a log archive without having to wait for
segments to complete, thus decreasing the window of data loss without
having to waste space using archive_timeout. This works best in
combination with archive_command - suggested usage docs etc coming later.
Use names like "RI_ConstraintTrigger_a_NNNN" for FK action triggers and
"RI_ConstraintTrigger_c_NNNN" for FK check triggers. This ensures the
action trigger fires first in self-referential cases where the very same
row update fires both an action and a check trigger. This change provides
a non-probabilistic solution for bug #6268, at the risk that it could break
client code that is making assumptions about the exact names assigned to
auto-generated FK triggers. Hence, change this in HEAD only. No need for
forced initdb since old triggers continue to work fine.
When a foreign-key constraint references another column of the same table,
row updates will queue both the PK's ON UPDATE action and the FK's CHECK
action in the same event. The ON UPDATE action must execute first, else
the CHECK will check a non-final state of the row and possibly throw an
inappropriate error, as seen in bug #6268 from Roman Lytovchenko.
Now, the firing order of multiple triggers for the same event is determined
by the sort order of their pg_trigger.tgnames, and the auto-generated names
we use for FK triggers are "RI_ConstraintTrigger_NNNN" where NNNN is the
trigger OID. So most of the time the firing order is the same as creation
order, and so rearranging the creation order fixes it.
This patch will fail to fix the problem if the OID counter wraps around or
adds a decimal digit (eg, from 99999 to 100000) while we are creating the
triggers for an FK constraint. Given the small odds of that, and the low
usage of self-referential FKs, we'll live with that solution in the back
branches. A better fix is to change the auto-generated names for FK
triggers, but it seems unwise to do that in stable branches because there
may be client code that depends on the naming convention. We'll fix it
that way in HEAD in a separate patch.
Back-patch to all supported branches, since this bug has existed for a long
time.
This allows different instances to use the eventlog with different
identifiers, by setting the event_source GUC, similar to how
syslog_ident works.
Original patch by MauMau, heavily modified by Magnus Hagander
Use the CommitDate not the AuthorDate, as the former is representative of
the order in which things went into the main repository, and the latter
isn't very; we now have instances where the AuthorDate is as much as a
month before the patch really went in. Also, get rid of the "commit order
inversions" heuristic, which turns out not to do anything very desirable.
Instead we just print commits in strict timestamp order, interpreting the
"timestamp" of a merged commit as its timestamp on the newest branch it
appears in. This fixes some cases where very ancient commits were being
printed relatively early in the report.
The uniqueness condition might fail to hold intra-transaction, and assuming
it does can give incorrect query results. Per report from Marti Raudsepp,
though this is not his proposed patch.
Back-patch to 9.0, where both these features were introduced. In the
released branches, add the new IndexOptInfo field to the end of the struct,
to try to minimize ABI breakage for third-party code that may be examining
that struct.
A transaction can export a snapshot with pg_export_snapshot(), and then
others can import it with SET TRANSACTION SNAPSHOT. The data does not
leave the server so there are not security issues. A snapshot can only
be imported while the exporting transaction is still running, and there
are some other restrictions.
I'm not totally convinced that we've covered all the bases for SSI (true
serializable) mode, but it works fine for lesser isolation modes.
Joachim Wieland, reviewed by Marko Tiikkaja, and rather heavily modified
by Tom Lane
No need to do "errcode(errcode_for_file_access())", just
"errcode_for_file_access()" is enough. The extra errcode() call is useless
but harmless, so there's no user-visible bug here. Nevertheless, backpatch
to 9.1 where this code were added.
Avoid possibly dumping core when pgstat_track_activity_query_size has a
less-than-default value; avoid uselessly searching for the query string
of a successfully-exited backend; don't bother putting out an ERRDETAIL if
we don't have a query to show; some other minor stylistic improvements.
Turns out that use of ShareUpdateExclusiveLock or ShareRowExclusiveLock
to protect DDL changes had gotten copied into several places that were
not touched by either of Simon's original patches for the feature, and
thus neither he nor I thought to revert them. (Indeed, it appears that
two of these uses were committed *after* the reversion, which just goes
to show that git merging is no panacea.) Change these places to use
AccessExclusiveLock again. If we ever manage to resurrect that feature,
we're going to have to think a bit harder about how to keep lock level
usage in sync for DDL operations that aren't within the AlterTable
infrastructure.
Two of these bugs are only in HEAD, but one is in the 9.1 branch too.
Alvaro found one of them, I found the other two.
To avoid minimize risk inside the postmaster, we subject this feature
to a number of significant limitations. We very much wish to avoid
doing any complex processing inside the postmaster, due to the
posssibility that the crashed backend has completely corrupted shared
memory. To that end, no encoding conversion is done; instead, we just
replace anything that doesn't look like an ASCII character with a
question mark. We limit the amount of data copied to 1024 characters,
and carefully sanity check the source of that data. While these
restrictions would doubtless be unacceptable in a general-purpose
logging facility, even this limited facility seems like an improvement
over the status quo ante.
Marti Raudsepp, reviewed by PDXPUG and myself
Essentially, the "IF EXISTS" portion was being ignored, and an error
thrown anyway if the opfamily did not exist.
I broke this in commit fd1843ff8979c0461fb3f1a9eab61140c977e32d; so
backpatch to 9.1.X.
Report and diagnosis by KaiGai Kohei.
There's no need to clamp the standby's xmin to be greater than
GetOldestXmin's result; if there were any such need this logic would be
hopelessly inadequate anyway, because it fails to account for
within-database versus cluster-wide values of GetOldestXmin. So get rid of
that, and just rely on sanity-checking that the xmin is not wrapped around
relative to the nextXid counter. Also, don't reset the walsender's xmin if
the current feedback xmin is indeed out of range; that just creates more
problems than we already had. Lastly, don't bother to take the
ProcArrayLock; there's no need to do that to set xmin.
Also improve the comments about this in GetOldestXmin itself.
Make it return empty strings when there are no more words to the left of
the current position, instead of sometimes returning NULL and other times
returning copies of the leftmost word. Also, fetch the words in one scan,
rather than the previous wasteful approach of starting from scratch for
each word. Make the code a bit harder to break when someone decides we
need more words of context, too. (There was actually a memory leak here,
because whoever added prev6_wd neglected to free it.)
extnamespace means something altogether different in this context.
Mostly by accident, this coding error (introduced in my commit
82a4a777d9) broke the buildfarm instead
of just silently doing the wrong thing.
This gets rid of a significant amount of duplicative code.
KaiGai Kohei, reviewed in earlier versions by Dimitri Fontaine, with
further review and cleanup by me.
This is merely an exercise in satisfying pedants, not a bug fix, because
in every case we were checking for failure later with ferror(), or else
there was nothing useful to be done about a failure anyway. Document
the latter cases.
An empty HBA file is surely an error, since it means there is no way to
connect to the server. We've not heard identifiable reports of people
actually doing that, but this will also close off the case Thom Brown just
complained of, namely pointing hba_file at a directory. (On at least some
platforms with some directories, it will read as an empty file.)
Perhaps this should be back-patched, but given the lack of previous
complaints, I won't add extra work for the translators.
There's no particular value in doing AssertMacro((tup) != NULL) in front
of code that's certain to crash anyway if tup is NULL. And if "tup" is
actually the address of a local variable, gcc 4.6 whinges about it. That's
arguably pretty broken on gcc's part, but we might as well remove the
useless test to silence the warnings. This gets rid of all the -Waddress
warnings in the backend; there are some in libpq and psql that are a bit
harder to avoid.
The heuristic for when to dump a cast failed for a cast between table
rowtypes, as reported by Frédéric Rejol. Fix it by setting
the "dump" flag for such a type the same way as the flag is set for the
underlying table or base type. This won't result in the auto-generated
type appearing in the output, since setting its objType to DO_DUMMY_TYPE
unconditionally suppresses that. But it will result in dumpCast doing what
was intended.
Back-patch to 8.3. The 8.2 code is rather different in this area, and it
doesn't seem worth any risk to fix a corner case that nobody has stumbled
on before.
In general the data returned by an index-only scan should have the
datatypes originally computed by FormIndexDatum. If the index opclasses
use "storage" datatypes different from their input datatypes, the scan
tuple will not have the same rowtype attributed to the index; but we had
a hard-wired assumption that that was true in nodeIndexonlyscan.c. We'd
already hacked around the issue for the one case where the types are
different in btree indexes (btree name_ops), but this would definitely
come back to bite us if we ever implement index-only scans in GiST.
To fix, require the index AM to explicitly provide the tupdesc for the
tuple it is returning. btree can just pass back the index's tupdesc, but
GiST will have to work harder when and if it supports index-only scans.
I had previously proposed fixing this by allowing the index AM to fill the
scan tuple slot directly; but on reflection that seemed like a module
layering violation, since TupleTableSlots are creatures of the executor.
At least in the btree case, it would also be less efficient, since the
tuple deconstruction work would occur even for rows later found to be
invisible to the scan's snapshot.
This view was being insufficiently careful about matching the FK constraint
to the depended-on primary or unique key constraint. That could result in
failure to show an FK constraint at all, or showing it multiple times, or
claiming that it depended on a different constraint than the one it really
does. Fix by joining via pg_depend to ensure that we find only the correct
dependency.
Back-patch, but don't bump catversion because we can't force initdb in back
branches. The next minor-version release notes should explain that if you
need to fix this in an existing installation, you can drop the
information_schema schema then re-create it by sourcing
$SHAREDIR/information_schema.sql in each database (as a superuser of
course).
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
This way, if a role's config setting uses the name of another role,
the validity of the dump isn't dependent on the order in which those
two roles are dumped.
Code by Phil Sorber, comment by me.
Nobody using the missing_ok flag yet, but let's speculate that this will
be a better interface for future callers.
KaiGai Kohei, with some adjustments by me.
This patch restores the pre-9.1 behavior that pl/perl functions returning
VOID ignore the result value of their last Perl statement. 9.1.0
unintentionally threw an error if the last statement returned a reference,
as reported by Amit Khandekar.
Also, make sure it works to return a string value for a composite type,
so long as the string meets the type's input format. We already allowed
the equivalent behavior for arrays, so it seems inconsistent to not allow
it for composites.
In addition, ensure we throw errors for attempts to return arrays or hashes
when the function's declared result type is not an array or composite type,
respectively. Pre-9.1 versions rather uselessly returned strings like
ARRAY(0x221a9a0) or HASH(0x221aa90), while 9.1.0 threw an error for the
hash case and returned a garbage value for the array case.
Also, clean up assorted grotty coding in Perl array conversion, including
use of a session-lifespan memory context to accumulate the array value
(resulting in session-lifespan memory leak on error), failure to apply the
declared typmod if any, and failure to detect some cases of non-rectangular
multi-dimensional arrays.
Alex Hunsaker and Tom Lane
Relation rowtypes and automatically-generated array types do not need to
have their own extension membership dependency entries. If we create such
then it becomes more difficult to remove items from an extension, and it's
also harder for an extension upgrade script to make sure it duplicates the
dependencies created by the extension's regular installation script.
I changed the code in such a way that this happened in commit
988cccc620, I think because of worries about
the shell-type-replacement case; but that cure was worse than the disease.
It would only matter if one extension created a shell type that was
replaced with an auto-generated type in another extension, which seems
pretty far-fetched. Better to make this work unsurprisingly in normal
cases.
Report and patch by Robert Haas, comment adjustments by me.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
It's been bothering me for several days that pretending that the cstring
data stored in a btree name_ops column is really a "name" Datum could lead
to reading past the end of memory. However, given the current memory
layout used for index-only scans in the btree code, a crash is in fact not
possible. Document that so we don't break it. I have not thought of any
other solutions that aren't fairly ugly too, and most of them lose the
functionality of index-only scans on name columns altogether, so this seems
like the way to go.
Dept. of second thoughts: as long as we've got that tlist hanging around
anyway, we can apply ExecTypeFromTL to it to get a suitable descriptor for
the ScanTupleSlot. This is a nicer solution than the previous one because
it eliminates some hard-wired knowledge about btree name_ops, and because
it avoids the somewhat shaky assumption that we needn't set up the scan
tuple descriptor in EXPLAIN_ONLY mode. It doesn't change what actually
happens at run-time though, and I'm still a bit nervous about that.
This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple. The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes. The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.
To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns. I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion. (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.) This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.
Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
There's no particular advantage to this change on its face; indeed,
it's possible that this might be slightly slower than the old way.
But it makes this information more easily accessible to other
functions, and therefore paves the way for future code consolidation.
Performance isn't critical here, so there's no need to be smart about
how we do the search.
This is a heavily cut-down version of a patch from KaiGai Kohei,
with several fixes by me. Additional review from Dimitri Fontaine.
When I consolidated two copies of the HOT-chain search logic in commit
4da99ea423, I introduced a behavior
change: the old code wouldn't necessarily traverse the entire chain,
if the most recently returned tuple were updated while the HOT chain
traversal is in progress. The new behavior seems more correct, but
unfortunately, the code here relies on a scan with SnapshotNow failing
to see its own updates. That seems pretty shaky even with the old HOT
chain traversal behavior, since there's no guarantee that these
updates will always be HOT, but it's trivial to broke a failure with
the new HOT search logic. Fix by updating just the first matching
pg_constraint tuple, rather than all of them, since there should be
only one anyway. But since nobody has reproduced this failure on older
versions, no back-patch for now.
Report and test case by Alex Hunsaker; tablecmds.c changes by me.
This was broken in commit 53dbc27c62, which
introduced unlogged tables. Fortunately, as debugging tools go, this one
is pretty cheap, which is probably why it took nine months for someone to
notice, but it's not intended to be enabled by default, so revert.
Noted by Fujii Masao.
The original idea of this patch was to make box picksplit run faster, by
eliminating unnecessary palloc() overhead, but that was obsoleted by the new
double-sorting split algorithm that doesn't call these functions so heavily
anymore. Nevertheless, the code looks better this way.
Original patch by me, reviewed and tidied up after the double-sorting patch
by Kevin Grittner.
We copy all the matched tuples off the page during _bt_readpage, instead of
expensively re-locking the page during each subsequent tuple fetch. This
costs a bit more local storage, but not more than 2*BLCKSZ worth, and the
reduction in LWLock traffic is certainly worth that. What's more, this
lets us get rid of the API wart in the original patch that said an index AM
could randomly decline to supply an index tuple despite having asserted
pg_am.amcanreturn. That will be important for future improvements in the
index-only-scan feature, since the executor will now be able to rely on
having the index data available.
This bollixes the test because it's expecting to see the idx_tup_fetch
counter increase, which won't happen if heap fetches were avoided by use
of an index-only scan. Per buildfarm results.
While at it, let's just make sure that enable_seqscan and enable_indexscan
are ON for this test ...
transform_null_equals is only supposed to affect "foo = NULL" expressions
given directly by the user, not the internal "foo = NULL" expression
generated from CASE-WHEN.
This fixes bug #6242, reported by Sergey. Backpatch to all supported
branches.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
In oder to exit on SIGTERM when in non-walsender code,
such as do_pg_stop_backup(), we need to set the interrupt
variables that are used there, and not just the walsender
local ones.
CREATE EXTENSION needs to transiently set search_path, as well as
client_min_messages and log_min_messages. We were doing this by the
expedient of saving the current string value of each variable, doing a
SET LOCAL, and then doing another SET LOCAL with the previous value at
the end of the command. This is a bit expensive though, and it also fails
badly if there is anything funny about the existing search_path value,
as seen in a recent report from Roger Niederland. Fortunately, there's a
much better way, which is to piggyback on the GUC infrastructure previously
developed for functions with SET options. We just open a new GUC nesting
level, do our assignments with GUC_ACTION_SAVE, and then close the nesting
level when done. This automatically restores the prior settings without a
re-parsing pass, so (in principle anyway) there can't be an error. And
guc.c still takes care of cleanup in event of an error abort.
The CREATE EXTENSION code for this was modeled on some much older code in
ri_triggers.c, which I also changed to use the better method, even though
there wasn't really much risk of failure there. Also improve the comments
in guc.c to reflect this additional usage.
Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
This oversight meant that on Windows, the pg_settings view would not
display source file or line number information for values coming from
postgresql.conf, unless the backend had received a SIGHUP since starting.
In passing, also make the error detection in read_nondefault_variables a
tad more thorough, and fix it to not lose precision on float GUCs (these
changes are already in HEAD as of my previous commit).
We used to just remember the GucSource, but saving GucContext too provides
a little more information --- notably, whether a SET was done by a
superuser or regular user. This allows us to rip out the fairly dodgy code
that define_custom_variable used to use to try to infer the context to
re-install a pre-existing setting with. In particular, it now works for
a superuser to SET a extension's SUSET custom variable before loading the
associated extension, because GUC can remember whether the SET was done as
a superuser or not. The plperl regression tests contain an example where
this is useful.
Previously, the code assumed that the only possible action to take was
to delete files behind a certain cutoff point. The async notify code
was already a crock: it used a different "pagePrecedes" function for
truncation than for regular operation. By allowing it to pass a
callback to SlruScanDirectory it can do cleanly exactly what it needs to
do.
The clog.c code also had its own use for SlruScanDirectory, which is
made a bit simpler with this.
This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs. So, let's just remove it.
With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not. (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)
There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.
Thus, an object referenced in a default expression could be dropped while
the function remained present. This was unaccountably missed in the
original patch to add default parameters for functions. Reported by
Pavel Stehule.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
We'll now use "exists" for EXISTS(SELECT ...), "array" for ARRAY(SELECT
...), or the sub-select's own result column name for a simple expression
sub-select. Previously, you usually got "?column?" in such cases.
Marti Raudsepp, reviewed by Kyotaro Horiugchi
pg_trgm was already doing this unofficially, but the implementation hadn't
been thought through very well and leaked memory. Restructure the core
GiST code so that it actually works, and document it. Ordinarily this
would have required an extra memory context creation/destruction for each
GiST index search, but I was able to avoid that in the normal case of a
non-rescanned search by finessing the handling of the RBTree. It used to
have its own context always, but now shares a context with the
scan-lifespan data structures, unless there is more than one rescan call.
This should make the added overhead unnoticeable in typical cases.
This code was looking at the sub-Query tree as seen in the parent query's
RangeTblEntry; but that's the pristine parser output, and what we need to
look at is the tree as it stands at the completion of planning. Otherwise
we might pick up a Var that references a subquery that got flattened and
hence has no RelOptInfo in the subroot. Per report from Peter Geoghegan.
If an indexable operator for a non-collatable indexed datatype has a
collatable right-hand input type, any OpExpr for it will be marked with a
nonzero inputcollid (since having one collatable input is sufficient to
make that happen). However, an index on a non-collatable column certainly
doesn't have any collation. This caused us to fail to match such operators
to their indexes, because indxpath.c required an exact match of index
collation and clause collation. It seems correct to allow a match when the
index is collation-less regardless of the clause's inputcollid: an operator
with both noncollatable and collatable inputs could perhaps depend on the
collation of the collatable input, but it could hardly expect the index for
the noncollatable input to have that same collation.
Per bug #6232 from Pierre Ducroquet. His example is specifically about
"hstore ? text" but the problem seems quite generic.
We now report errors reported by the just-unblocked and unblocking
transactions identically; this should fix relatively common buildfarm
failures reported by animals that are failing the "wrong" session.
In hio.c, document how we avoid deadlock with respect to visibility map
buffer locks. In visibilitymap.c, update the LOCKING section of the
file header comment.
Both oversights noted by Heikki Linnakangas.
In commit c1d9579dd8, I changed things so
that the output of the Agg node that feeds the window functions would not
list any ungrouped Vars directly. Formerly, for example, the Agg tlist
might have included both "x" and "sum(x)", which is not really valid if
"x" isn't a grouping column. If we then had a window function ordering on
something like "sum(x) + 1", prepare_sort_from_pathkeys would find no exact
match for this in the Agg tlist, and would conclude that it must recompute
the expression. But it would break the expression down to just the Var
"x", which it would find in the tlist, and then rebuild the ORDER BY
expression using a reference to the subplan's "x" output. Now, after the
above-referenced changes, "x" isn't in the Agg tlist if it's not a grouping
column, so that prepare_sort_from_pathkeys fails with "could not find
pathkey item to sort", as reported by Bricklen Anderson.
The fix is to not break down Aggrefs into their component parts, but just
treat them as irreducible expressions to be sought in the subplan tlist.
This is definitely OK for the use with respect to window functions in
grouping_planner, since it just built the tlist being used on the same
basis. AFAICT it is safe for other uses too; most of the other call sites
couldn't encounter Aggrefs anyway.
In REPEATABLE READ (nee SERIALIZABLE) mode, an attempt to do
GetTransactionSnapshot() between AbortTransaction and CleanupTransaction
failed, because GetTransactionSnapshot would recompute the transaction
snapshot (which is already wrong, given the isolation mode) and then
re-register it in the TopTransactionResourceOwner, leading to an Assert
because the TopTransactionResourceOwner should be empty of resources after
AbortTransaction. This is the root cause of bug #6218 from Yamamoto
Takashi. While changing plancache.c to avoid requesting a snapshot when
handling a ROLLBACK masks the problem, I think this is really a snapmgr.c
bug: it's lower-level than the resource manager mechanism and should not be
shutting itself down before we unwind resource manager resources. However,
just postponing the release of the transaction snapshot until cleanup time
didn't work because of the circular dependency with
TopTransactionResourceOwner. Fix by managing the internal reference to
that snapshot manually instead of depending on TopTransactionResourceOwner.
This saves a few cycles as well as making the module layering more
straightforward. predicate.c's dependencies on TopTransactionResourceOwner
go away too.
I think this is a longstanding bug, but there's no evidence that it's more
than a latent bug, so it doesn't seem worth any risk of back-patching.
The code path that tried a generic plan, didn't like it, and then made a
custom plan was mistakenly passing the same copy of the query_list to the
planner both times. This doesn't work too well for nontrivial queries,
since the planner tends to scribble on its input. Diagnosis and fix by
Yamamoto Takashi.
The keywords and values arguments of these functions are more properly
declared "const char * const *" than just "const char **".
Lionel Elie Mamane, reviewed by Craig Ringer
I had copied-and-pasted a claim that we couldn't reach this point when
dealing with utility statements, but that was a leftover from when the
caller was required to supply a plan to start with. We now will go
through here at least once when handling a utility statement, so it
seems worth a check to see whether a snapshot is actually needed.
(Note that analyze_requires_snapshot is quite a cheap test.)
Per suggestion from Yamamoto Takashi. I don't think I believe that this
resolves his reported assertion failure; but it's worth changing anyway,
just to save a cycle or two.
pg_dump has historically understood -Z with no -F switch to mean that
it should emit a gzip-compressed version of its plain text output.
This got broken through a misunderstanding in the 9.1 patch that added
directory output format. Restore the former behavior.
Per complaint from Roger Niederland and diagnosis by Adrian Klaver.
The constraint exclusion feature checks for contradictions among scan
restriction clauses, as well as contradictions between those clauses and a
table's CHECK constraints. The first aspect of this testing can be useful
for non-table relations (such as subqueries or functions-in-FROM), but the
feature was coded with only the CHECK case in mind so we were applying it
only to plain-table RTEs. Move the relation_excluded_by_constraints call
so that it is applied to all RTEs not just plain tables. With the default
setting of constraint_exclusion this results in no extra work, but with
constraint_exclusion = ON we will detect optimizations that we missed
before (at the cost of more planner cycles than we expended before).
Per a gripe from Gunnlaugur Þór Briem. Experimentation with
his example also showed we were not being very bright about the case where
constraint exclusion is proven within a subquery within UNION ALL, so tweak
the code to allow set_append_rel_pathlist to recognize such cases.
We were mapping "Central America Standard Time" to "CST6CDT", which seems
entirely wrong, because according to the Olson timezone database noplace
in Central America observes daylight savings time on any regular basis ---
and certainly not according to the USA DST rules that are implied by
"CST6CDT". (Mexico is an exception, but they can be disregarded since
they have a separate timezone name in Windows.) So, map this zone name to
plain "CST6", which will provide a fixed UTC offset.
As written, this patch will also result in mapping "Central America
Daylight Time" to CST6. I considered hacking things so that would still
map to CST6CDT, but it seems it would confuse win32tzlist.pl to put those
two names in separate entries. Since there's little evidence that any
such zone name is used in the wild, much less that CST6CDT would be a good
match for it, I'm not too worried about what we do with it.
Per complaint from Pratik Chirania.
This is not actually used anywhere yet, but it gets the basic
infrastructure in place. It is fairly likely that there are bugs, and
support for some important platforms may be missing, so we'll need to
refine this as we go along.
This provides information about the numbers of tuples that were visited
but not returned by table scans, as well as the numbers of join tuples
that were considered and discarded within a join plan node.
There is still some discussion going on about the best way to report counts
for outer-join situations, but I think most of what's in the patch would
not change if we revise that, so I'm going to go ahead and commit it as-is.
Documentation changes to follow (they weren't in the submitted patch
either).
Marko Tiikkaja, reviewed by Marc Cousin, somewhat revised by Tom
Per bug #6205, reported by Abel Abraham Camarillo Ojeda. This isn't a
particularly elegant fix, but I'm trying to minimize the chances of
causing yet another round of breakage.
Adjust regression tests to exercise this case.
The standardized errno code for "no such locale" failures is ENOENT, which
we were just reporting at face value, viz "No such file or directory".
Per gripe from Thom Brown, this might confuse users, so add an errdetail
message to clarify what it means. Also, report newlocale() failures as
ERRCODE_INVALID_PARAMETER_VALUE rather than using
errcode_for_file_access(), since newlocale()'s errno values aren't
necessarily tied directly to file access failures.
plpgsql's exec_stmt_execsql was Assert'ing that a CachedPlanSource was
is_valid immediately after exec_prepare_plan. The risk factor in this case
is that after building the prepared statement, exec_prepare_plan calls
exec_simple_check_plan, which might try to generate a generic plan --- and
with CLOBBER_CACHE_ALWAYS or other unusual causes of invalidation, that
could result in an invalidation. However, that path could only be taken
for a SELECT query, for which we need not set mod_stmt. So in this case
I think it's best to just remove the Assert; it's okay to look at a
slightly-stale querytree for what we need here. Per buildfarm testing.
The regression tests were failing with CLOBBER_CACHE_ALWAYS enabled,
as reported by buildfarm member jaguar. There was an Assert in
BuildCachedPlan that asserted that the CachedPlanSource hadn't been
invalidated since we called RevalidateCachedQuery, which in theory can't
happen because we are holding locks on all the relevant database objects.
However, CLOBBER_CACHE_ALWAYS generates a false positive by making an
invalidation happen anyway; and on reflection, that could also occur as a
result of a badly-timed sinval reset due to queue overflow. We could just
remove the Assert and forge ahead with the not-really-stale querytree, but
it seems safer to do another RevalidateCachedQuery call just to make real
sure everything's OK.
This reverts commit 79b2ee20c8, which proved
to not be very informative; it looks like the "pgstat wait timeout"
warnings in the buildfarm are just a symptom of running on heavily loaded
machines, and there isn't any weird mechanism causing them to appear.
To try to reduce the frequency of buildfarm failures from this effect,
increase PGSTAT_MAX_WAIT_TIME from 5 seconds to 10.
Also, arrange to not send a fresh inquiry message every single time through
the loop, as that seems more likely to cause problems (by swamping the
collector) than fix them. We'll now send an inquiry the first time through
the delay loop, and every 640 msec thereafter.
As observed by Heikki, we need not conflict on heap page locks during an
insert; heap page locks are only aggregated tuple locks, they don't imply
locking "gaps" as index page locks do. So we can avoid some unnecessary
conflicts, and also do the SSI check while not holding exclusive lock on
the target buffer.
Kevin Grittner, reviewed by Jeff Davis. Back-patch to 9.1.
Now that a NULL ParamListInfo pointer causes significantly different
behavior in plancache.c, be sure to pass it that way when the expression
is known not to reference any plpgsql variables. Saves a few setup
cycles anyway.
This oversight led to a massive memory leak --- upwards of 10KB per tuple
--- during creation-time verification of an exclusion constraint based on a
GIST index. In most other scenarios it'd just be a leak of 10KB that would
be recovered at end of query, so not too significant; though perhaps the
leak would be noticeable in a situation where a GIST index was being used
in a nestloop inner indexscan. In any case, it's a real leak of long
standing, so patch all supported branches. Per report from Harald Fuchs.
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
queuedForEmptying flag correctly on buffer when adding it to the queue.
Also, don't add buffer to the queue if it's there already. These were
harmless oversights; failing to set the flag just means that a buffer might
get added to the queue twice if more tuples are added to it (although that
can't actually happen at this point because all the upper buffers have
already been emptied), and having the same buffer twice in the emptying
queue is harmless. But better be tidy.
This function will be useful for altering the lifespan of a context after
creation (for example, by creating it under a transient context and later
reparenting it to belong to a long-lived context). It costs almost no new
code, since we can refactor what was there. Per my proposal of yesterday.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
BREAKAGE.
Remove double-quoting of index/table names in reindexdb. BACKWARD
COMPABILITY BREAKAGE.
Document thate user/database names are preserved with double-quoting by
command-line tools like vacuumdb.
Add __attribute__ decorations for printf format checking to the places that
were missing them. Fix the resulting warnings. Add
-Wmissing-format-attribute to the standard set of warnings for GCC, so these
don't happen again.
The warning fixes here are relatively harmless. The one serious problem
discovered by this was already committed earlier in
cf15fb5cab.
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
When building a GiST index that doesn't fit in cache, buffers are attached
to some internal nodes in the index. This speeds up the build by avoiding
random I/O that would otherwise be needed to traverse all the way down the
tree to the find right leaf page for tuple.
Alexander Korotkov
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
With 9.1's use of Params to pass down values from NestLoop join nodes
to their inner plans, it is possible for a Param to have type RECORD, in
which case the set of fields comprising the value isn't determinable by
inspection of the Param alone. However, just as with a Var of type RECORD,
we can find out what we need to know if we can locate the expression that
the Param represents. We already knew how to do this in get_parameter(),
but I'd overlooked the need to be able to cope in get_name_for_var_field(),
which led to EXPLAIN failing with "record type has not been registered".
To fix, refactor the search code in get_parameter() so it can be used by
both functions.
Per report from Marti Raudsepp.
Adds additional test for active walsenders and closes a race
condition for when we failover when a new walsender was connecting.
Reported and fixed bu Fujii Masao. Review by Heikki Linnakangas
The code in shift_jis_20042euc_jis_2004() would fetch two bytes even when
only one remained in the string. Since conversion functions aren't
supposed to assume null-terminated input, this poses a small risk of
fetching past the end of memory and incurring SIGSEGV. No such crash has
been identified in the field, but we've certainly seen the equivalent
happen in other code paths, so patch this one all the way back.
Report and patch by Noah Misch.
Since the last couple of columns of pg_type are often NULL,
sizeof(FormData_pg_type) can be an overestimate of the actual size of the
tuple data part. Therefore memcpy'ing that much out of the catalog cache,
as analyze.c was doing, poses a small risk of copying past the end of
memory and incurring SIGSEGV. No such crash has been identified in the
field, but we've certainly seen the equivalent happen in other code paths,
so patch this one all the way back.
Per valgrind testing by Noah Misch, though this is not his proposed patch.
I chose to use SearchSysCacheCopy1 rather than inventing special-purpose
infrastructure for copying only the minimal part of a pg_type tuple.
It used to say
ERROR: invalid byte sequence for encoding "UTF8": 0xdb24
Change this to
ERROR: invalid byte sequence for encoding "UTF8": 0xdb 0x24
to make it clear that this is a byte sequence and not a code point.
Also fix the adjacent "character has no equivalent" message that has
the same issue.
The $(PERL) macro will be set by configure if it finds perl at all,
but $(perl_privlibexp) isn't configured unless you said --with-perl.
This results in confusing error messages if someone cd's into
src/pl/plperl and tries to build there despite the configure omission,
as reported by Tomas Vondra in bug #6198. Add simple checks to
provide a more useful report, while not disabling other use of the
makefile such as "make clean".
Back-patch to 9.0, which is as far as the patch applies easily.
If a sub-select's output column is a simple Var, recursively look for
statistics applying to that Var, and use them if available. The need for
this was foreseen ages ago, but we didn't have enough infrastructure to do
it with reasonable speed until just now.
We punt and stick with default estimates if the subquery uses set
operations, GROUP BY, or DISTINCT, since those operations would change the
underlying column statistics (particularly, the relative frequencies of
different values) beyond recognition. This means that the types of
sub-selects for which this improvement applies are fairly limited, since
most subqueries satisfying those restrictions would have gotten flattened
into the parent query anyway. But it does help for some cases, such as
subqueries with ORDER BY or LIMIT.
Since the subroots will surely link back to the same glob struct, this
necessarily leads to infinite recursion. Doh. Found while trying to
debug some other code.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
storage/proc.h should not include replication/syncrep.h, especially not
when the latter includes storage/proc.h; but in any case this was a pretty
poor thing from a modular layering standpoint.
">" should be ">>". This typo results in failure to use all of the bits
of the provided seed.
This might rise to the level of a security bug if we were relying on
srand48 for any security-critical purposes, but we are not --- in fact,
it's not used at all unless the platform lacks srandom(), which is
improbable. Even on such a platform the exposure seems minimal.
Reported privately by Andres Freund.
Formerly, set_subquery_pathlist and other creators of plans for subqueries
saved only the rangetable and rowMarks lists from the lower-level
PlannerInfo. But there's no reason not to remember the whole PlannerInfo,
and indeed this turns out to simplify matters in a number of places.
The immediate reason for doing this was so that the subroot will still be
accessible when we're trying to extract column statistics out of an
already-planned subquery. But now that I've done it, it seems like a good
code-beautification effort in its own right.
I also chose to get rid of the transient subrtable and subrowmark fields in
SubqueryScan nodes, in favor of having setrefs.c look up the subquery's
RelOptInfo. That required changing all the APIs in setrefs.c to pass
PlannerInfo not PlannerGlobal, which was a large but quite mechanical
transformation.
One side-effect not foreseen at the beginning is that this finally broke
inheritance_planner's assumption that replanning the same subquery RTE N
times would necessarily give interchangeable results each time. That
assumption was always pretty risky, but now we really have to make a
separate RTE for each instance so that there's a place to carry the
separate subroots.
In the past, relhassubclass always remained true if a relation had ever had
child relations, even if the last subclass was long gone. While this had
only marginal performance implications in most cases, it was annoying, and
I'm now considering some planner changes that would raise the cost of a
false positive. It was previously impractical to fix this because of race
condition concerns. However, given the recent change that made tablecmds.c
take ShareExclusiveLock on relations that are gaining a child (commit
fbcf4b92aa), we can now allow ANALYZE to
clear the flag when it's no longer relevant. There is no additional
locking cost to do so, since ANALYZE takes ShareExclusiveLock anyway.
1. Use new dropdb --if-exists option, to avoid alarming the user if
the database being dropped doesn't already exist.
2. Bail out if createdb fails.
3. exit 1 if the checks fail.
4. Make it executable.
Josh Kupershmidt, with some kibitzing by me.
on Windows. ecpglib doesn't link with libpgport, but picks and compiles
the .c files it needs individually. To cope with that, move the setlocale()
wrapper from chklocale.c to a separate setlocale.c file, and include that
in ecpglib.
dots. I previously worked around this in initdb, mapping the known
problematic locale names to aliases that work, but Hiroshi Inoue pointed
out that that's not enough because even if you use one of the aliases, like
"Chinese_HKG", setlocale(LC_CTYPE, NULL) returns back the long form, ie.
"Chinese_Hong Kong S.A.R.". When we try to restore an old locale value by
passing that value back to setlocale(), it fails. Note that you are affected
by this bug also if you use one of those short-form names manually, so just
reverting the hack in initdb won't fix it.
To work around that, move the locale name mapping from initdb to a wrapper
around setlocale(), so that the mapping is invoked on every setlocale() call.
Also, add a few checks for failed setlocale() calls in the backend. These
calls shouldn't fail, and if they do there isn't much we can do about it,
but at least you'll get a warning.
Backpatch to 9.1, where the initdb hack was introduced. The Windows bug
affects older versions too if you set locale manually to one of the aliases,
but given the lack of complaints from the field, I'm hesitent to backpatch.
ifdef block. It has nothing to do with whether the replacement snprintf
function is used. It caused no live bug, because the replacement snprintf
function is always used on Win32, but it was nevertheless misplaced.
Examination of examples provided by Mark Kirkwood and others has convinced
me that actually commit 7f3eba30c9 was quite
a few bricks shy of a load. The useful part of that patch was clamping
ndistinct for the inner side of a semi or anti join, and the reason why
that's needed is that it's the only way that restriction clauses
eliminating rows from the inner relation can affect the estimated size of
the join result. I had not clearly understood why the clamping was
appropriate, and so mis-extrapolated to conclude that we should clamp
ndistinct for the outer side too, as well as for both sides of regular
joins. These latter actions were all wrong, and are reverted with this
patch. In addition, the clamping logic is now made to affect the behavior
of both paths in eqjoinsel_semi, with or without MCV lists to compare.
When we have MCVs, we suppose that the most common values are the ones
that are most likely to survive the decimation resulting from a lower
restriction clause, so we think of the clamping as eliminating non-MCV
values, or potentially even the least-common MCVs for the inner relation.
Back-patch to 8.4, same as previous fixes in this area.
This patch fixes an oversight in my commit
7f3eba30c9 of 2008-10-23. That patch
accounted for baserel restriction clauses that reduced the number of rows
coming out of a table (and hence the number of possibly-distinct values of
a join variable), but not for join restriction clauses that might have been
applied at a lower level of join. To account for the latter, look up the
sizes of the min_lefthand and min_righthand inputs of the current join,
and clamp with those in the same way as for the base relations.
Noted while investigating a complaint from Ben Chobot, although this in
itself doesn't seem to explain his report.
Back-patch to 8.4; previous versions used different estimation methods
for which this heuristic isn't relevant.
It is possible for VACUUM to scan no pages at all, if the visibility map
shows that all pages are all-visible. In this situation VACUUM has no new
information to report about the relation's tuple density, so it wasn't
changing pg_class.reltuples ... but it updated pg_class.relpages anyway.
That's wrong in general, since there is no evidence to justify changing the
density ratio reltuples/relpages, but it's particularly bad if the previous
state was relpages=reltuples=0, which means "unknown tuple density".
We just replaced "unknown" with "zero". ANALYZE would eventually recover
from this, but it could take a lot of repetitions of ANALYZE to do so if
the relation size is much larger than the maximum number of pages ANALYZE
will scan, because of the moving-average behavior introduced by commit
b4b6923e03.
The only known situation where we could have relpages=reltuples=0 and yet
the visibility map asserts everything's visible is immediately following
a pg_upgrade. It might be advisable for pg_upgrade to try to preserve the
relpages/reltuples statistics; but in any case this code is wrong on its
own terms, so fix it. Per report from Sergey Koposov.
Back-patch to 8.4, where the visibility map was introduced, same as the
previous change.
Previously, 'yesterday 04:00:00'::timestamp didn't do the same thing as
'04:00:00 yesterday'::timestamp, and the return value from the latter
was midnight rather than the specified time.
Dean Rasheed, with some stylistic changes
Per my testing, this works just as well with gcc as it does with HP's
compiler; and there is no reason to think that the effect doesn't occur
with icc, either.
Also, rewrite the header comment about enforcing sequencing around spinlock
operations, per Robert's gripe that it was misleading.
At least on this architecture, it's very important to spin on a
non-atomic instruction and only retry the atomic once it appears
that it will succeed. To fix this, split TAS() into two macros:
TAS(), for trying to grab the lock the first time, and TAS_SPIN(),
for spinning until we get it. TAS_SPIN() defaults to same as TAS(),
but we can override it when we know there's a better way.
It's likely that some of the other cases in s_lock.h require
similar treatment, but this is the only one we've got conclusive
evidence for at present.
On closer inspection, whining in restore_toc_entries_parallel is really
much too late for any user-facing error case. The right place to do it
is at the start of RestoreArchive(), before we've done anything interesting
(suh as trying to DROP all the targets ...)
Back-patch to 8.4, where parallel restore was introduced.
If we are unable to do a parallel restore because the input file is stdin
or is otherwise unseekable, we should complain and fail immediately, not
after having done some of the restore. Complaining once per thread isn't
so cool either, and the messages should be worded to make it clear this is
an unsupported case not some weird race-condition bug. Per complaint from
Lonni Friedman.
Back-patch to 8.4, where parallel restore was introduced.
their own.
Avoid compile problems with defines being redefined after the removal of
the #if blocks.
Change script to use shell functions for simplicity.
These days, such a response is far more likely to signify a server-side
problem, such as fork failure. Reporting "server does not support SSL"
(in sslmode=require) could be quite misleading. But the results could
be even worse in sslmode=prefer: if the problem was transient and the
next connection attempt succeeds, we'll have silently fallen back to
protocol version 2.0, possibly disabling features the user needs.
Hence, it seems best to just eliminate the assumption that backing off
to non-SSL/2.0 protocol is the way to recover from an "E" response, and
instead treat the server error the same as we would in non-SSL cases.
I tested this change against a pre-7.0 server, and found that there
was a second logic bug in the "prefer" path: the test to decide whether
to make a fallback connection attempt assumed that we must have opened
conn->ssl, which in fact does not happen given an "E" response. After
fixing that, the code does indeed connect successfully to pre-7.0,
as long as you didn't set sslmode=require. (If you did, you get
"Unsupported frontend protocol", which isn't completely off base
given the server certainly doesn't support SSL.)
Since there seems no reason to believe that pre-7.0 servers exist anymore
in the wild, back-patch to all supported branches.
There are assorted situations wherein PQconnectPoll() will abandon a
connection attempt and try again with different parameters (eg, SSL versus
not SSL). However, the code forgot to discard any pending data in libpq's
I/O buffers when doing this. In at least one case (server returns E
message during SSL negotiation), there is unread input data which bollixes
the next connection attempt. I have not checked to see whether this is
possible in the other cases where we close the socket and retry, but it
seems like a matter of good defensive programming to add explicit
buffer-flushing code to all of them.
This is one of several issues exposed by Daniel Farina's report of
misbehavior after a server-side fork failure.
This has been wrong since forever, so back-patch to all supported branches.
tsvector_concat() allocated its result workspace using the "conservative"
estimate of the sum of the two input tsvectors' sizes. Unfortunately that
wasn't so conservative as all that, because it supposed that the number of
pad bytes required could not grow. Which it can, as per test case from
Jesper Krogh, if there's a mix of lexemes with positions and lexemes
without them in the input data. The fix is to assume that we might add
a not-previously-present pad byte for each and every lexeme in the two
inputs; which really is conservative, but it doesn't seem worthwhile to
try to be more precise.
This is an aboriginal bug in tsvector_concat, so back-patch to all
versions containing it.
These changes allow backtick command evaluation and psql variable
interpolation to happen on substrings of a single meta-command argument.
Formerly, no such evaluations happened at all if the backtick or colon
wasn't the first character of the argument, and we considered an argument
completed as soon as we'd processed one backtick, variable reference, or
quoted substring. A string like 'FOO'BAR was thus taken as two arguments
not one, not exactly what one would expect. In the new coding, an argument
is considered terminated only by unquoted whitespace or backslash.
Also, clean up a bunch of omissions, infelicities and outright errors in
the psql documentation of variables and metacommand argument syntax.
This was deemed unnecessary initially but in later discussion it was
agreed otherwise.
Original file from Kevin Grittner, allegedly from Dan Ports.
I had to clean up whitespace a bit per changes from Heikki.
Per previous experimentation, backtracking slows down lexing performance
significantly (by about a third). It's usually pretty easy to avoid, just
need to have rules that accept an incomplete construct and do whatever the
lexer would have done otherwise.
The backtracking was introduced by the patch that added quoted variable
substitution. Back-patch to 9.0 where that was added.
Rather than dumping out the raw array as PostgreSQL represents it
internally, we now print it out in a format similar to the one in
which the user input it, which seems a lot more user friendly.
Shigeru Hanada
Robert Haas
Tom Lane
Peter Eisentraut
Simon Riggs
Heikki Linnakangas
Bruce Momjian
Magnus Hagander
Alvaro Herrera
Itagaki Takahiro
Michael Meskes
Andrew Dunstan