Ensure that when updating the catalog_xmin of the synced slots, it is
first written to disk before changing the in-memory value
(effective_catalog_xmin). This is to prevent a scenario where the
in-memory value change triggers a vacuum to remove catalog tuples before
the catalog_xmin is written to disk. In the event of a crash before the
catalog_xmin is persisted, we would not know that some required catalog
tuples have been removed and the synced slot would be invalidated.
Change the sanity check to ensure that remote_slot's confirmed_flush LSN
can't precede the local/synced slot during slot sync. Note that the
restart_lsn of the synced/local slot can be ahead of remote_slot. This can
happen when slot advancing machinery finds a running xacts record after
reaching the consistent state at a later point than the primary where it
serializes the snapshot and updates the restart_lsn.
Make the check to sync slots robust by allowing to sync only when the
confirmed_lsn, restart_lsn, or catalog_xmin of the remote slot is ahead of
the synced/local slot.
Reported-by: Amit Kapila and Shveta Malik
Author: Hou Zhijie, Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot
Discussion: https://postgr.es/m/OS0PR01MB57162B67D3CB01B2756FBA6D94062@OS0PR01MB5716.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/CAJpy0uCSS5zmdyUXhvw41HSdTbRqX1hbYqkOfHNj7qQ+2zn0AQ@mail.gmail.com
b262ad440 added code to have the planner remove redundant IS NOT NULL
quals and eliminate needless scans for IS NULL quals on tables where the
qual's column has a NOT NULL constraint.
That commit failed to consider that an inheritance parent table could
have differing NOT NULL constraints between the parent and the child.
This caused issues as if we eliminated a qual on the parent, when
applying the quals to child tables in apply_child_basequals(), the qual
might not have been added to the parent's baserestrictinfo.
Here we fix this by not applying the optimization to remove redundant
quals to RelOptInfos belonging to inheritance parents and applying the
optimization again in apply_child_basequals(). Effectively, this means
that the parent and child are considered independently as the parent has
both an inh=true and inh=false RTE and we still apply the optimization
to the RelOptInfo corresponding to the inh=false RTE.
We're able to still apply the optimization in add_base_clause_to_rel()
for partitioned tables as the NULLability of partitions must match that
of their parent. And, if we ever expand restriction_is_always_false()
and restriction_is_always_true() to handle partition constraints then we
can apply the same logic as, even in multi-level partitioned tables,
there's no way to route values to a partition when the qual does not
match the partition qual of the partitioned table's parent partition.
The same is true for CHECK constraints as those must also match between
arent partitioned tables and their partitions.
Author: Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAMbWs4930gQSZmjR7aANzEapdy61gCg6z8dT-kAEYD0sYWKPdQ@mail.gmail.com
A pairing heap can perform the same operations as the binary heap +
index, with as good or better algorithmic complexity, and that's an
existing data structure so that we don't need to invent anything new
compared to v16. This commit makes the new binaryheap functionality
that was added in commits b840508644 and bcb14f4abc unnecessary, but
they will be reverted separately.
Remove the optimization to only build and maintain the heap when the
amount of memory used is close to the limit, becuase the bookkeeping
overhead with the pairing heap seems to be small enough that it
doesn't matter in practice.
Reported-by: Jeff Davis
Author: Heikki Linnakangas
Reviewed-by: Michael Paquier, Hayato Kuroda, Masahiko Sawada
Discussion: https://postgr.es/m/12747c15811d94efcc5cda72d6b35c80d7bf3443.camel%40j-davis.com
The user can set RELSEG_SIZE to a high number at compile time, so we
can't use it to control the size of an array on the stack: it could be
many gigabytes in size. On closer inspection, we don't really need that
intermediate array anyway. Let's just write directly into the output
array, and then perform the absolute->relative adjustment in place.
This fixes new code from commit dc21234005.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2B2hZ0sBztPW4mkLfng0qfkNtAHFUfxOMLizJ0BPmi5%2Bg%40mail.gmail.com
aa5edbe379 has tweaked _hash_freeovflpage() so as the write buffer's
LSN is updated only when necessary, when REGBUF_NO_CHANGE is not used.
The replay code was not consistent with that, causing the write buffer's
LSN to be updated and its page to be marked as dirty even if the buffer
was registered in a "clean" state. This was possible for the case of a
squeeze record when there are no tuples to add to the write buffer, for
(is_prim_bucket_same_wrt && !is_prev_bucket_same_wrt).
I have performed some validation of this commit with
wal_consistency_checking and a change in WAL that logs REGBUF_NO_CHANGE
to a new BKPIMAGE_*. Thanks to that, it is possible to know at replay
if a buffer was clean when it was registered, then cross-checked the LSN
of the "clean" page copy coming from WAL with the LSN of the block once
the record has been replayed. This eats one bit in bimg_info, which is
not acceptable to be integrated as-is, but it could become handy in the
future. I didn't spot other areas than the one fixed by this commit at
the extent of what the main regression test suite covers.
As this is an oversight in aa5edbe379, no backpatch is required.
Reported-by: Zubeyr Eryilmaz
Author: Hayato Kuroda
Reviewed-by: Amit Kapila, Michael Paquier
Discussion: https://postgr.es/m/ZbyVVG_7eW3YD5-A@paquier.xyz
Commit 72559438 started copying more attributes from AttributeTemplate
to the functions we generate on the fly. In the case of deform
functions, which return void, this meant that "noundef", from
AttributeTemplate's return value (a Datum) was copied to a void type.
Older LLVM releases were OK with that, but LLVM 18 crashes.
Update our llvm_copy_attributes() function to skip copying the attribute
for the return value, if the target function returns void.
Thanks to Dmitry Dolgov for help chasing this down.
Back-patch to all supported releases, like 72559438.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Discussion: https://postgr.es/m/CAFj8pRACpVFr7LMdVYENUkScG5FCYMZDDdSGNU-tch%2Bw98OxYg%40mail.gmail.com
This adjusts various appendStringInfo* function calls to use a more
appropriate and efficient function with the same behavior. For example,
use appendStringInfoChar() when appending a single character rather than
appendStringInfo() and appendStringInfoString() when no formatting is
required rather than using appendStringInfo().
All adjustments made here are in code that's new to v17, so it makes
sense to fix these now rather than wait a few years and make
backpatching harder.
Discussion: https://postgr.es/m/CAApHDvojY2UvMiO+9_55ArTj10P1LBNJyyoGB+C65BLDNT0GsQ@mail.gmail.com
Reviewed-by: Nathan Bossart, Tom Lane
The bump allocator was recently added in 29f6a959c. Our other
allocators have a similar macro to this, but seemingly the version of
the macro for those allocators is only used in places where the chunk
header is decoded. Since the bump allocator has no chunk header, none
of those functions exist for bump therefore macro is unused. Remove it.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/5f724fb2-96e1-4f36-b65b-47b337ad432e@eisentraut.org
This is a C11 feature, and we require C99. While at it, go the further
step and get rid of the surrounding union (with uintptr_t) entirely,
as there is currently no use case for this file to access the header of
BlocktableEntry as a uintptr_t, and there are no additional alignment
requirements. The least invasive way seems to be to transfer the old
union name to this struct.
Reported by Pavel Borisov and Andres Freund, per buildfarm member mylodon
Reviewed by Pavel Borisov
Discussion: https://postgr.es/m/CALT9ZEH11NYV8AOzKb1bWhCf6J0H=H31f0MgT9xX+HdqvcA1rw@mail.gmail.com
Previously, the decision to store values in leaves or within the child
pointer was made at compile time, with variable length values using
leaves by necessity. This commit allows introspecting the length of
variable length values at runtime for that decision. This requires
the ability to tell whether the last-level child pointer is actually
a value, so we use a pointer tag in the lowest level bit.
Use this in TID store. This entails adding a byte to the header to
reserve space for the tag. Commit f35bd9bf3 stores up to three offsets
within the header with no bitmap, and now the header can be embedded
as above. This reduces worst-case memory usage when TIDs are sparse.
Reviewed (in an earlier version) by Masahiko Sawada
Discussion: https://postgr.es/m/CANWCAZYw+_KAaUNruhJfE=h6WgtBKeDG32St8vBJBEY82bGVRQ@mail.gmail.com
Discussion: https://postgr.es/m/CAD21AoBci3Hujzijubomo1tdwH3XtQ9F89cTNQ4bsQijOmqnEw@mail.gmail.com
While keeping API the same, this commit provides a way for block-level table
AMs to re-use existing acquire_sample_rows() by providing custom callbacks
for getting the next block and the next tuple.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240407214001.jgpg5q3yv33ve6y3%40awork3.anarazel.de
Reviewed-by: Pavel Borisov
Let table AM define custom reloptions for its tables. This allows specifying
AM-specific parameters by the WITH clause when creating a table.
The reloptions, which could be used outside of table AM, are now extracted
into the CommonRdOptions data structure. These options could be by decision
of table AM directly specified by a user or calculated in some way.
The new test module test_tam_options evaluates the ability to set up custom
reloptions and calculate fields of CommonRdOptions on their base.
The code may use some parts from prior work by Hao Wu.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Discussion: https://postgr.es/m/AMUA1wBBBxfc3tKRLLdU64rb.1.1683276279979.Hmail.wuhao%40hashdata.cn
Reviewed-by: Reviewed-by: Pavel Borisov, Matthias van de Meent, Jess Davis
A NESTED path allows to extract data from nested levels of JSON
objects given by the parent path expression, which are projected as
columns specified using a nested COLUMNS clause, just like the parent
COLUMNS clause. Rows comprised from a NESTED columns are "joined"
to the row comprised from the parent columns. If a particular NESTED
path evaluates to 0 rows, then the nested COLUMNS will emit NULLs,
making it an OUTER join.
NESTED columns themselves may include NESTED paths to allow
extracting data from arbitrary nesting levels, which are likewise
joined against the rows at the parent level.
Multiple NESTED paths at a given level are called "sibling" paths
and their rows are combined by UNIONing them, that is, after being
joined against the parent row as described above.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
Currently, get_json_expr_options() does not emit the default values
for QUOTES (KEEP QUOTES) and WRAPPER (WITHOUT WRAPPER). That causes
the deparsed JSON_TABLE() columns, such as those contained in a a
view's query, to behave differently when executed than the original
definition. That's because the rules encoded in
transformJsonTableColumns() will choose either JSON_VALUE() or
JSON_QUERY() as implementation to execute a given column's path
expression depending on the QUOTES and WRAPPER specificationd and
they have slightly different semantics.
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEqhqsfrg_p7EMyo5zak3d767iFDL8vz_4%3DZBHpOtrghw%40mail.gmail.com
Currently, transformJsonFuncExpr() enforces some restrictions on
the combinations of QUOTES and WRAPPER clauses that can be specified
in JSON_QUERY(). The intent was to only prevent the useless
combination WITH WRAPPER OMIT QUOTES, but the coding prevented KEEP
QUOTES too, which is not helpful. Fix that.
When testing buffer pool logic, it is useful to be able to evict
arbitrary blocks. This function can be used in SQL queries over the
pg_buffercache view to set up a wide range of buffer pool states. Of
course, buffer mappings might change concurrently so you might evict a
block other than the one you had in mind, and another session might
bring it back in at any time. That's OK for the intended purpose of
setting up developer testing scenarios, and more complicated interlocking
schemes to give stronger guararantees about that would likely be less
flexible for actual testing work anyway. Superuser-only.
Author: Palak Chaturvedi <chaturvedipalak1911@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com> (docs, small tweaks)
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Cary Huang <cary.huang@highgo.ca>
Reviewed-by: Cédric Villemain <cedric.villemain+pgsql@abcsql.com>
Reviewed-by: Jim Nasby <jim.nasby@gmail.com>
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CALfch19pW48ZwWzUoRSpsaV9hqt0UPyaBPC4bOZ4W+c7FF566A@mail.gmail.com
One of the assertions was the subject of a false positive complaint from
Coverity, but none of the assertions added much, so get rid of them.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3000247.1712537309@sss.pgh.pa.us
libpq now always tries to send ALPN. With the traditional negotiated
SSL connections, the server accepts the ALPN, and refuses the
connection if it's not what we expect, but connecting without ALPN is
still OK. With the new direct SSL connections, ALPN is mandatory.
NOTE: This uses "TBD-pgsql" as the protocol ID. We must register a
proper one with IANA before the release!
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
By skipping SSLRequest, you can eliminate one round-trip when
establishing a TLS connection. It is also more friendly to generic TLS
proxies that don't understand the PostgreSQL protocol.
This is disabled by default in libpq, because the direct TLS handshake
will fail with old server versions. It can be enabled with the
sslnegotation=direct option. It will still fall back to the negotiated
TLS handshake if the server rejects the direct attempt, either because
it is an older version or the server doesn't support TLS at all, but
the fallback can be disabled with the sslnegotiation=requiredirect
option.
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
The ANALYZE command prefetches and reads sample blocks chosen by a
BlockSampler algorithm. Instead of calling [Prefetch|Read]Buffer() for
each block, ANALYZE now uses the streaming API introduced in b5a9b18cd0.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/flat/CAN55FZ0UhXqk9v3y-zW_fp4-WCp43V8y0A72xPmLkOM%2B6M%2BmJg%40mail.gmail.com
The new "log_connection_negotiation" server option causes the server
to print messages to the log when it receives a SSLRequest or
GSSENCRequest packet from the client. Together with "log_connections",
it gives a trace of how a connection and encryption is
negotiatated. Use the option in the libpq_encryption test, to verify
in more detail how libpq negotiates encryption with different
gssencmode and sslmode options.
This revealed a couple of cases where libpq retries encryption or
authentication, when it should already know that it cannot succeed. I
marked them with XXX comments in the test tables. They only happen
when the connection was going to fail anyway, and only with rare
combinations of options, so they're not serious.
Discussion: https://www.postgresql.org/message-id/CAEze2Wja8VUoZygCepwUeiCrWa4jP316k0mvJrOW4PFmWP0Tcw@mail.gmail.com
Replace (expr op C1) OR (expr op C2) ... with expr op ANY(ARRAY[C1, C2, ...])
on the preliminary stage of optimization when we are still working with the
expression tree.
Here Cn is a n-th constant expression, 'expr' is non-constant expression, 'op'
is an operator which returns boolean result and has a commuter (for the case
of reverse order of constant and non-constant parts of the expression,
like 'Cn op expr').
Sometimes it can lead to not optimal plan. This is why there is a
or_to_any_transform_limit GUC. It specifies a threshold value of length of
arguments in an OR expression that triggers the OR-to-ANY transformation.
Generally, more groupable OR arguments mean that transformation will be more
likely to win than to lose.
Discussion: https://postgr.es/m/567ED6CA.2040504%40sigaev.ru
Author: Alena Rybakina <lena.ribackina@yandex.ru>
Author: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
In one multixact.c edge case, we need a mechanism to wait for one
multixact offset to be written before being allowed to read the next
one. We used to handle this case by sleeping for one millisecond and
retrying, but such sleeps have been reported as problematic in
production cases. We can avoid the problem by using a condition
variable: readers sleep on it and then every creator of multixacts
broadcasts into the CV when creation is sufficiently far along.
Author: Kyotaro Horiguchi <horikyotajntt@gmail.com>
Reviewed-by: Andrey Borodin <amborodin@acm.org>
Discussion: https://postgr.es/m/47A598F4-B4E7-4029-8FEC-A06A6C3CB4B5@yandex-team.ru
Discussion: https://postgr.es/m/20200515.090333.24867479329066911.horikyota.ntt
nbtree index scans with SAOP inequalities (but no SAOP equalities)
performed extra ORDER proc lookups for any remaining equality strategy
scan keys. This could waste cycles, and caused assertion failures.
Keeping around a separate ORDER proc is only necessary for a scan's
non-array/non-SAOP equality scan keys when the scan has at least one
other SAOP equality strategy key (a SAOP inequality shouldn't count).
To fix, replace _bt_preprocess_array_keys_final's assertion with a test
that makes the function return early when the scan has no SAOP equality
scan keys.
Oversight in commit 1b134ca5, which enhanced nbtree ScalarArrayOp
execution.
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/0539d3d3-a402-0a49-ed5e-26429dffc4bd@gmail.com
29f6a959c added a bump allocator type for efficient compact allocations.
Here we make use of this for non-bounded tuplesorts to store tuples.
This is very space efficient when storing narrow tuples due to bump.c
not having chunk headers. This means we can fit more tuples in work_mem
before spilling to disk, or perform an in-memory sort touching fewer
cacheline.
Author: David Rowley
Reviewed-by: Nathan Bossart
Reviewed-by: Matthias van de Meent
Reviewed-by: Tomas Vondra
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
This tracks the position of WAL that's been fully copied into WAL
buffers by all processes emitting WAL. (For some reason we call that
"WAL insertion"). This is updated using atomic monotonic advance during
WaitXLogInsertionsToFinish, which is not when the insertions actually
occur, but it's the only place where we know where have all the
insertions have completed.
This value is useful in WALReadFromBuffers, which can verify that
callers don't try to read past what has been inserted. (However, more
infrastructure is needed in order to actually use WAL after the flush
point, since it could be lost.)
The value is also useful in WaitXLogInsertionsToFinish() itself, since
we can now exit quickly when all WAL has been already inserted, without
even having to take any locks.
This introduces a bump MemoryContext type. The bump context is best
suited for short-lived memory contexts which require only allocations
of memory and never a pfree or repalloc, which are unsupported.
Memory palloc'd into a bump context has no chunk header. This makes
bump a useful context type when lots of small allocations need to be
done without any need to pfree those allocations. Allocation sizes are
rounded up to the next MAXALIGN boundary, so with this and no chunk
header, allocations are very compact indeed.
Allocations are also very fast as bump does not check any freelists to
try and make use of previously free'd chunks. It just checks if there
is enough room on the current block, and if so it bumps the freeptr
beyond this chunk and returns the value that the freeptr was previously
pointing to. Simple and fast. A new block is malloc'd when there's not
enough space in the current block.
Code using the bump allocator must take care never to call any functions
which could try to call realloc() (or variants), pfree(),
GetMemoryChunkContext() or GetMemoryChunkSpace() on a bump allocated
chunk. Due to lack of chunk headers, these operations are unsupported.
To increase the chances of catching such issues, when compiled with
MEMORY_CONTEXT_CHECKING, bump allocated chunks are given a header and
any attempt to perform an unsupported operation will result in an ERROR.
Without MEMORY_CONTEXT_CHECKING, code attempting an unsupported
operation could result in a segfault.
A follow-on commit will implement the first user of bump.
Author: David Rowley
Reviewed-by: Nathan Bossart
Reviewed-by: Matthias van de Meent
Reviewed-by: Tomas Vondra
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
Reserve 4 bits for MemoryContextMethodID rather than 3. 3 bits did
technically allow a maximum of 8 memory context types, however, we've
opted to reserve some bit patterns which left us with only 4 slots, all
of which were used.
Here we add another bit which frees up 8 slots for future memory context
types.
In passing, adjust the enum names in MemoryContextMethodID to make it
more clear which ones can be used and which ones are reserved.
Author: Matthias van de Meent, David Rowley
Discussion: https://postgr.es/m/CAApHDvqGSpCU95TmM=Bp=6xjL_nLys4zdZOpfNyWBk97Xrdj2w@mail.gmail.com
Until now, when calling pq_putmessage to write new data to a libpq
socket, all writes are copied into a buffer and that buffer gets flushed
when full to avoid having to perform small writes to the socket.
There are cases where we must write large amounts of data to the socket,
sometimes larger than the size of the buffer. In this case, it's
wasteful to memcpy this data into the buffer and flush it out, instead,
we can send it directly from the memory location that the data is already
stored in.
Here we adjust internal_putbytes() so that after having just flushed the
buffer to the socket, if the remaining bytes to send is as big or bigger
than the buffer size, we just send directly rather than needlessly
copying into the PqSendBuffer buffer first.
Examples of operations that write large amounts of data in one message
are; outputting large tuples with SELECT or COPY TO STDOUT and
pg_basebackup.
Author: Melih Mutlu
Reviewed-by: Heikki Linnakangas
Reviewed-by: Jelte Fennema-Nio
Reviewed-by: David Rowley
Reviewed-by: Ranier Vilela
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAGPVpCR15nosj0f6xe-c2h477zFR88q12e6WjEoEZc8ZYkTh3Q@mail.gmail.com
Until now, heapgetpage()'s loop over all tuples performed some conditional
checks for each tuple, even though condition did not change across the loop.
This commit fixes that by moving the loop into an inline function. By calling
it with different constant arguments, the compiler can generate an optimized
loop for the different conditions, at the price of two per-page checks.
For cases of all-visible tables and an isolation level other than
serializable, speedups of up to 25% have been measured.
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Tested-by: Quan Zongliang <quanzongliang@yeah.net>
Discussion: https://postgr.es/m/20230716015656.xjvemfbp5fysjiea@awork3.anarazel.de
Discussion: https://postgr.es/m/2ef7ff1b-3d18-2283-61b1-bbd25fc6c7ce@yeah.net
Commit 792752af4e added infrastructure for using AVX-512 intrinsic
functions, and this commit uses that infrastructure to optimize
visibilitymap_count(). Specificially, a new pg_popcount_masked()
function is introduced that applies a bitmask to every byte in the
buffer prior to calculating the population count, which is used to
filter out the all-visible or all-frozen bits as needed. Platforms
without AVX-512 support should also see a nice speedup due to the
reduced number of calls to a function pointer.
Co-authored-by: Ants Aasma
Discussion: https://postgr.es/m/BL1PR11MB5304097DF7EA81D04C33F3D1DCA6A%40BL1PR11MB5304.namprd11.prod.outlook.com
When we determine that a wanted block can't be combined with the current
pending read, it's time to start that read to get it out of the way. An
"if" in that code path should have been a "while", because it might take
more than one go in case of partial reads. This was only broken for
smaller ranges, as the more common case of io_combine_limit-sized ranges
is handled earlier in the code and knows how to loop, hiding the bug for
a while.
Discovered while testing large parallel sequential scans of partially
cached tables. The ramp-up-and-down block allocator for parallel scans
could hit the problem case and skip some blocks near the end that should
have been streamed.
Defect in commit b5a9b18c.
Discussion: https://postgr.es/m/CA%2BhUKG%2Bh8Whpv0YsJqjMVkjYX%2B80fTVc6oi-V%2BzxJvykLpLHYQ%40mail.gmail.com
This patch generalizes libpq's existing single-row mode to allow
individual partial-result PGresults to contain up to N rows, rather
than always one row. This reduces malloc overhead compared to plain
single-row mode, and it is very useful for psql's FETCH_COUNT feature,
since otherwise we'd have to add code (and cycles) to either merge
single-row PGresults into a bigger one or teach psql's
results-printing logic to accept arrays of PGresults.
To avoid API breakage, PQsetSingleRowMode() remains the same, and we
add a new function PQsetChunkedRowsMode() to invoke the more general
case. Also, PGresults obtained the old way continue to carry the
PGRES_SINGLE_TUPLE status code, while if PQsetChunkedRowsMode() is
used then their status code is PGRES_TUPLES_CHUNK. The underlying
logic is the same either way, though.
Daniel Vérité, reviewed by Laurenz Albe and myself (and whacked
around a bit by me, so any remaining bugs are my fault)
Discussion: https://postgr.es/m/CAKZiRmxsVTkO928CM+-ADvsMyePmU3L9DQCa9NwqjvLPcEe5QA@mail.gmail.com
BitmapAdjustPrefetchIterator() only used the blockno member of the
passed in TBMIterateResult to ensure that the prefetch iterator and
regular iterator stay in sync. Pass it the BlockNumber only, so that we
can move away from using the TBMIterateResult outside of table AM
specific code.
Author: Melanie Plageman
Reviewed-by: Tomas Vondra, Andres Freund, Heikki Linnakangas
Discussion: https://postgr.es/m/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
As of 7c70996ebf, BitmapPrefetch() used the recheck flag for
the current block to determine whether or not it should skip prefetching
the proposed prefetch block. As explained in the comment, this assumed
the index AM will report the same recheck value for the future page as
it did for the current page - but there's no guarantee.
This only affects prefetching - if the recheck flag changes, we may
prefetch blocks unecessarily and not prefetch blocks that will be
needed. But we don't need to rely on that assumption - we know the
recheck flag for the block we're considering prefetching, so we can
use that.
The impact is very limited in practice - the opclass would need to
assign different recheck flags to different blocks, but none of the
built-in opclasses seems to do that.
Author: Melanie Plageman
Reviewed-by: Tomas Vondra, Andres Freund, Tom Lane
Discussion: https://postgr.es/m/1939305.1712415547%40sss.pgh.pa.us
Commit 7c70996ebf introduced an optimization to allow bitmap
scans to operate like index-only scans by not fetching a block from the
heap if none of the underlying data is needed and the block is marked
all visible in the visibility map.
With the introduction of table AMs, a FIXME was added to this code
indicating that the skip_fetch logic should be pushed into the table
AM-specific code, as not all table AMs may use a visibility map in the
same way.
This commit resolves this FIXME for the current block. The layering
violation is still present in BitmapHeapScans's prefetching code, which
uses the visibility map to decide whether or not to prefetch a block.
However, this can be addressed independently.
Author: Melanie Plageman
Reviewed-by: Andres Freund, Heikki Linnakangas, Tomas Vondra, Mark Dilger
Discussion: https://postgr.es/m/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
This new DDL command splits a single partition into several parititions.
Just like ALTER TABLE ... MERGE PARTITIONS ... command, new patitions are
created using createPartitionTable() function with parent partition as the
template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
This new DDL command merges several partitions into the one partition of the
target table. The target partition is created using new
createPartitionTable() function with parent partition as the template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
Set BitmapHeapScanState->can_skip_fetch in BitmapHeapNext() instead of
in ExecInitBitmapHeapScan(). This is a preliminary step to pushing the
skip fetch optimization into heap AM code.
Author: Melanie Plageman
Reviewed-by: Tomas Vondra, Andres Freund, Heikki Linnakangas
Discussion: https://postgr.es/m/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
Even though waiting for replay LSN happens without explicit transaction,
AbortTransaction() is responsible for the cleanup of the shared memory if
the error is thrown in a stored procedure. So, we need to do WaitLSNCleanup()
there to clean up after some unexpected error happened while waiting for
replay LSN.
Discussion: https://postgr.es/m/202404051815.eri4u5q6oj26%40alvherre.pgsql
Author: Alvaro Herrera
Not just WaitLSNState.waitersHeap, but also WaitLSNState.procInfos and
updating of WaitLSNState.minWaitedLSN is protected by WaitLSNLock. There
is one now documented exclusion on fast-path checking of
WaitLSNProcInfo.inHeap flag.
Discussion: https://postgr.es/m/202404030658.hhj3vfxeyhft%40alvherre.pgsql
Change the order so that the table scan is initialized only after
initializing the index scan and building the bitmap.
This is mostly a cosmetic change for now, but later commits will need
to pass parameters to table_beginscan_bm() that are unavailable in
ExecInitBitmapHeapScan().
Author: Melanie Plageman
Reviewed-by: Tomas Vondra, Andres Freund, Heikki Linnakangas
Discussion: https://postgr.es/m/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
Commit 9e8da0f7 taught nbtree to handle ScalarArrayOpExpr quals
natively. This works by pushing down the full context (the array keys)
to the nbtree index AM, enabling it to execute multiple primitive index
scans that the planner treats as one continuous index scan/index path.
This earlier enhancement enabled nbtree ScalarArrayOp index-only scans.
It also allowed scans with ScalarArrayOp quals to return ordered results
(with some notable restrictions, described further down).
Take this general approach a lot further: teach nbtree SAOP index scans
to decide how to execute ScalarArrayOp scans (when and where to start
the next primitive index scan) based on physical index characteristics.
This can be far more efficient. All SAOP scans will now reliably avoid
duplicative leaf page accesses (just like any other nbtree index scan).
SAOP scans whose array keys are naturally clustered together now require
far fewer index descents, since we'll reliably avoid starting a new
primitive scan just to get to a later offset from the same leaf page.
The scan's arrays now advance using binary searches for the array
element that best matches the next tuple's attribute value. Required
scan key arrays (i.e. arrays from scan keys that can terminate the scan)
ratchet forward in lockstep with the index scan. Non-required arrays
(i.e. arrays from scan keys that can only exclude non-matching tuples)
"advance" without the process ever rolling over to a higher-order array.
Naturally, only required SAOP scan keys trigger skipping over leaf pages
(non-required arrays cannot safely end or start primitive index scans).
Consequently, even index scans of a composite index with a high-order
inequality scan key (which we'll mark required) and a low-order SAOP
scan key (which we won't mark required) now avoid repeating leaf page
accesses -- that benefit isn't limited to simpler equality-only cases.
In general, all nbtree index scans now output tuples as if they were one
continuous index scan -- even scans that mix a high-order inequality
with lower-order SAOP equalities reliably output tuples in index order.
This allows us to remove a couple of special cases that were applied
when building index paths with SAOP clauses during planning.
Bugfix commit 807a40c5 taught the planner to avoid generating unsafe
path keys: path keys on a multicolumn index path, with a SAOP clause on
any attribute beyond the first/most significant attribute. These cases
are now all safe, so we go back to generating path keys without regard
for the presence of SAOP clauses (just like with any other clause type).
Affected queries can now exploit scan output order in all the usual ways
(e.g., certain "ORDER BY ... LIMIT n" queries can now terminate early).
Also undo changes from follow-up bugfix commit a4523c5a, which taught
the planner to produce alternative index paths, with path keys, but
without low-order SAOP index quals (filter quals were used instead).
We'll no longer generate these alternative paths, since they can no
longer offer any meaningful advantages over standard index qual paths.
Affected queries thereby avoid all of the disadvantages that come from
using filter quals within index scan nodes. They can avoid extra heap
page accesses from using filter quals to exclude non-matching tuples
(index quals will never have that problem). They can also skip over
irrelevant sections of the index in more cases (though only when nbtree
determines that starting another primitive scan actually makes sense).
There is a theoretical risk that removing restrictions on SAOP index
paths from the planner will break compatibility with amcanorder-based
index AMs maintained as extensions. Such an index AM could have the
same limitations around ordered SAOP scans as nbtree had up until now.
Adding a pro forma incompatibility item about the issue to the Postgres
17 release notes seems like a good idea.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wz=ksvN_sjcnD1+Bt-WtifRA5ok48aDYnq3pkKhxgMQpcw@mail.gmail.com
When this bit of commentary was written, it was alluding to the
fact that we looked for newlines and EOD markers in the raw
(not yet encoding-converted) input data. We don't do that anymore,
preferring to batch the conversion of larger chunks of input and
split it into lines later. Hence there's no longer any need for
assumptions about the relevant characters being encoding-invariant,
and we should remove this comment saying we assume that.
Discussion: https://postgr.es/m/1461688.1712347668@sss.pgh.pa.us
The BAS_VACUUM ring size has been 256kB since commit d526575f introduced
the mechanism 17 years ago. Commit 1cbbee03 recently made it
configurable but retained the traditional default. The correct default
size has been debated for years, but 256kB is certainly very small.
VACUUM soon needs to write back data it dirtied only 32 blocks ago,
which usually requires flushing the WAL. New experiments in prefetching
pages for VACUUM exacerbated the problem by crashing into dirty data
even sooner. Let's make the default 2MB. That's 1.6% of the default
toy buffer pool size, and 0.2% of 1GB, which would be a considered a
small shared_buffers setting for a real system these days. Users are
still free to set the GUC to a different value.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240403221257.md4gfki3z75cdyf6%40awork3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGLY4Q4ZY4f1rvnFtv6%2BPkjNf8MejdPkcju3Qii9DYqqcQ%40mail.gmail.com
While pinning extra buffers to look ahead, users of strategies are in
danger of using too many buffers. For some strategies, that means
"escaping" from the ring, and in others it means forcing dirty data to
disk very frequently with associated WAL flushing. Since external code
has no insight into any of that, allow individual strategy types to
expose a clamp that should be applied when deciding how many buffers to
pin at once.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_aJXnqsyZt6HwFLnxYEBgE17oypkxbKbT1t1geE_wvH2Q%40mail.gmail.com
The "fast path" for well cached scans that don't do any I/O was
accidentally coded in a way that could only be triggered by pg_prewarm's
usage pattern, which starts out with a higher distance because of the
flags it passes in. We want it to work for streaming sequential scans
too, once that patch is committed. Adjust.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKXZALJ%3D6aArUsXRJzBm%3Dqvc4AWp7%3DiJNXJQqpbRLnD_w%40mail.gmail.com
Buildfarm member caiman is showing this, which surprises me because
it's very late-model gcc (14.0.1) and ought to be smart enough to
know that elog(ERROR) doesn't return. But we're likely to see the
same from stupider compilers too, so add a dummy initialization in
our usual style.
Align blocks stored in incremental files to BLCKSZ, so that the
incremental backups work well with CoW filesystems.
The header of the incremental file is padded with \0 to a multiple of
BLCKSZ, so that the block data (also BLCKSZ) is aligned to BLCKSZ. The
padding is added only to files containing block data, so files with just
the header remain small. This adds a bit of extra space, but as the
number of blocks increases the overhead gets negligible very quickly.
And as the padding is \0 bytes, it does compress extremely well.
The alignment is important for CoW filesystems that usually require the
blocks to be aligned to filesystem page size for features like block
sharing, deduplication etc. to work well. With the variable sized header
the blocks in the increments were not aligned at all, negating the
benefits of the CoW filesystems.
This matters even for non-CoW filesystems, for example when placed on a
RAID array. If the block is not aligned, it may easily span multiple
devices, causing read and write amplification.
It might be better to align the blocks to the filesystem page, not
BLCKSZ, but we have no good way to determine that. Even if we determine
the page size at the time of taking the backup, the backup may move. For
now the BLCKSZ seems sufficient - the filesystem page is usually 4K, so
the default BLCKSZ (8K by default) is aligned to that.
Author: Tomas Vondra
Reviewed-by: Robert Haas, Jakub Wartak
Discussion: https://postgr.es/m/3024283a-7491-4240-80d0-421575f6bb23%40enterprisedb.com
This removes the need to hold both the info_lck spinlock and
WALWriteLock to update them. We use stock atomic write instead, with
WALWriteLock held. Readers can use atomic read, without any locking.
This allows for some code to be reordered: some places were a bit
contorted to avoid repeated spinlock acquisition, but that's no longer a
concern, so we can turn them to more natural coding. Some further
changes are possible (maybe to performance wins), but in this commit I
did rather minimal ones only, to avoid increasing the blast radius.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/20200831182156.GA3983@alvherre.pgsql
This commit does two things:
1) Maintains inactive_since for sync slots whenever the slot is released
just like any other regular slot.
2) Ensures the value is set to the current timestamp during the promotion
of standby to help correctly interpret the time after promotion. We don't
want the slots to appear inactive for a long time after promotion if they
haven't been synchronized recently. This would also avoid the invalidation
of such slots immediately after promotion if tomorrow we have a feature
that invalidates slots based on their inactivity time. Whoever acquires
the slot i.e. makes the slot active will reset it to NULL.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik, Masahiko Sawada
Discussion: https://postgr.es/m/CAA4eK1KrPGwfZV9LYGidjxHeW+rxJ=E2ThjXvwRGLO=iLNuo=Q@mail.gmail.com
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmob_Ta-t2ty8QrKHBGnNLrf4ZYcwhGHGFsuUoFrAEDw4sA@mail.gmail.com
The current design behind the automatic generation of the C code and
documentation related to wait events introduced in fa88928470 does not
offer a way to attach new wait events without breaking ABI
compatibility, as all the events are forcibly reordered for each section
in the input file wait_event_names.txt. Adding new wait events to
stable branches is something that has happened in the past, 0b6517a3b7
being a recent example of that with VERSION_FILE_SYNC, so we need a way
to generate any C code for wait events while maintaining compatibility
on stable branches already released.
This commit solves this issue by adding a new region called
"ABI_compatibility" (keyword could be updated to something else if
someone had a better idea) to each section of wait_event_names.txt, so
as one can add new wait events to stable branches in
wait_event_names.txt while keeping the code ABI-compatible.
"ABI_compatibility" has no impact on the documentation generated: all
the wait events of one section are still alphabetically ordered. LWLock
and Lock sections generate their C code elsewhere, so they do not need
an "ABI_compatibility" region.
For example, let's imagine a wait_event_names.txt like that:
Section: ClassName - Foo
FOO_1 "Waiting in Foo 1"
FOO_2 "Waiting in Foo 2"
ABI_compatibility:
NEW_FOO_1 "Waiting in New Foo 1"
NEW_BAR_1 "Waiting in New Bar 1"
This results in the following enum, where the events in the ABI region
are listed last with the same ordering as in wait_event_names.txt:
typedef enum
{
WAIT_EVENT_FOO_1,
WAIT_EVENT_FOO_2,
WAIT_EVENT_NEW_FOO_1,
WAIT_EVENT_NEW_BAR_1
} WaitEventFoo;
New wait events added in stable branches should be added at the end of
each ABI_compatibility region, and ABI_compatibility should remain empty
on HEAD and unreleased stable branches.
This design has been suggested by Noah Misch and me.
Reported-by: Noah Misch
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20240317183114.16@rfd.leadboat.com
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737c are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This changes the three callers to json_parse_manifest() to use
json_parse_manifest_incremental_chunk() if appropriate. In the case of
the backend caller, since we don't know the size of the manifest in
advance we always call the incremental parser.
Author: Andrew Dunstan
Reviewed-By: Jacob Champion
Discussion: https://postgr.es/m/7b0a51d6-0d9d-7366-3a1a-f74397a02f55@dunslane.net
This would cause the timestamp values used by emit_log_hook and all the
other log destinations to differ, because the timestamps are reset
before sending the logs to the server and after calling the hook.
This change matters for emit_log_hook when generating log information
with 'n' or 'm' in log_line_prefix through log_status_format(), or when
doing direct calls to get_formatted_log_time() like in the JSON or CSV
log formats.
While on it, this commit fixes a couple of comments related to the
formatted timestamps where the JSON was not mentioned. Oversight in
dc686681e0, that I have noticed while reviewing this patch.
Author: Kambam Vinay, Michael Paquier
Discussion: https://postgr.es/m/CANiRfmsK36A0i8mnQtzaxhSm3CUCimPwJPp4WQNq53OdSNkgWg@mail.gmail.com
To allow the use of the read stream API added in b5a9b18cd for
sequential scans on heap tables, here we make some adjustments to make
that change less invasive and perhaps make the code easier to follow in
the process.
Here heapgetpage() gets broken into two functions:
1) The part which reads the block has now been moved into a function
named heapfetchbuf().
2) The part which performed pruning and populated the scan's
rs_vistuples[] array is now moved into a new function named
heap_prepare_pagescan().
The functionality provided by heap_prepare_pagescan() was only ever
required by SO_ALLOW_PAGEMODE scans, so the branching that was
previously done in heapgetpage() is no longer needed as we simply just
don't call heap_prepare_pagescan() from heapgettup() in the refactored
code.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_YtXJiYKQvb5JsA2SkwrsizYLugs4sSOZh3EAjKUg=gEQ@mail.gmail.com
EXPLAIN (ANALYZE, SERIALIZE) allows collection of statistics about
the volume of data emitted by a query, as well as the time taken
to convert the data to the on-the-wire format. Previously there
was no way to investigate this without actually sending the data
to the client, in which case network transmission costs might
swamp what you wanted to see. In particular this feature allows
investigating the costs of de-TOASTing compressed or out-of-line
data during formatting.
Stepan Rutz and Matthias van de Meent,
reviewed by Tomas Vondra and myself
Discussion: https://postgr.es/m/ca0adb0e-fa4e-c37e-1cd7-91170b18cae1@gmx.de
After this change we have XLogCtl->logWriteResult and ->logFlushResult.
There's no functional change, other than the fact that the assignment
from shared memory to local is no longer done via struct assignment, but
instead using a macro that copies each member separately.
The current representation is inconvenient going forward; notably, we
would like to add a new member "Copy" (to keep track of the last
position copied into WAL buffers), so the symmetry between the values in
shared memory vs. those in local would be lost.
This also gives us freedom to later change the concurrency model for the
values in shared memory: we can make them use atomics instead of relying
on the info_lck spinlock.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/202404031119.cd2kugjk2vho@alvherre.pgsql
Execute both freezing and pruning of tuples in the same
heap_page_prune() function, now called heap_page_prune_and_freeze(),
and emit a single WAL record containing all changes. That reduces the
overall amount of WAL generated.
This moves the freezing logic from vacuumlazy.c to the
heap_page_prune_and_freeze() function. The main difference in the
coding is that in vacuumlazy.c, we looked at the tuples after the
pruning had already happened, but in heap_page_prune_and_freeze() we
operate on the tuples before pruning. The heap_prepare_freeze_tuple()
function is now invoked after we have determined that a tuple is not
going to be pruned away.
VACUUM no longer needs to loop through the items on the page after
pruning. heap_page_prune_and_freeze() does all the work. It now
returns the list of dead offsets, including existing LP_DEAD items, to
the caller. Similarly it's now responsible for tracking 'all_visible',
'all_frozen', and 'hastup' on the caller's behalf.
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://www.postgresql.org/message-id/20240330055710.kqg6ii2cdojsxgje@liskov
In preparation of freezing and counting tuples which are not
candidates for pruning, split heap_prune_record_unchanged() into
multiple functions, depending the kind of line pointer. That's not too
interesting right now, but makes the next commit smaller.
Recording the lowest soon-to-be prunable xid is one of the actions we
take for unchanged LP_NORMAL item pointers but not for others, so move
that to the new heap_prune_record_unchanged_lp_normal() function. The
next commit will add more actions to these functions.
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://www.postgresql.org/message-id/20240330055710.kqg6ii2cdojsxgje@liskov
Bug in commit 53c2a97a9266: we failed to acquire the correct SLRU bank
lock when iterating to zero-out intermediate pages in predicate.c.
Rewrite the code block so that we follow the locking protocol correctly.
Also update an outdated comment in the same file -- SerialSLRULock
exists no more.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/2a25eaf4-a3a4-5fd1-6241-9d7c73142085@gmail.com
06c418e163 introduced pg_wal_replay_wait() procedure allowing to wait for
the particular LSN to be replayed on standby. The waiters were stored in
the flat array. Even though scanning small arrays is fast, that might be a
problem at scale (a lot of waiting processes).
This commit replaces the flat shared memory array with the pairing heap,
which holds the waiter with the least LSN at the top. This gives us O(log N)
complexity for both inserting and removing waiters.
Reported-by: Alvaro Herrera
Discussion: https://postgr.es/m/202404030658.hhj3vfxeyhft%40alvherre.pgsql
We were directly copying the LSN locations while syncing the slots on the
standby. Now, it is possible that at some particular restart_lsn there are
some running xacts, which means if we start reading the WAL from that
location after promotion, we won't reach a consistent snapshot state at
that point. However, on the primary, we would have already been in a
consistent snapshot state at that restart_lsn so we would have just
serialized the existing snapshot.
To avoid this problem we will use the advance_slot functionality unless
the snapshot already exists at the synced restart_lsn location. This will
help us to ensure that snapbuilder/slot statuses are updated properly
without generating any changes. Note that the synced slot will remain as
RS_TEMPORARY till the decoding from corresponding restart_lsn can reach a
consistent snapshot state after which they will be marked as
RS_PERSISTENT.
Per buildfarm
Author: Hou Zhijie
Reviewed-by: Bertrand Drouvot, Shveta Malik, Bharath Rupireddy, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716B3942AE49F3F725ACA92943B2@OS0PR01MB5716.jpnprd01.prod.outlook.com
This adds errcodes to a set of PANIC and FATAL errors in xlog.c
and relcache.c, which previously had no errcode at all set, in
order to make fleetwide analysis of errorlogs easier. There are
many more ereport/elogs left which could benefit from having an
errcode but this at least makes a dent in the issue.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1k8LgLEqncPGmz_fWnrobV6bjABOTH4tOWta6xNcPQig@mail.gmail.com
Presently, the archiver process restarts when an archive callback
ERRORs. To avoid this, archive module authors can use sigsetjmp(),
manage a memory context, etc., but that requires a lot of extra
code that will likely look roughly the same between modules. This
commit adds basic archive callback ERROR handling to pgarch.c so
that module authors won't ordinarily need to worry about this.
While this built-in handler attempts to clean up anything that an
archive module could conceivably have left behind, it is possible
that some modules are doing unexpected things that require
additional cleanup. Module authors should be sure to do any extra
required cleanup in a PG_CATCH block within the archiving callback.
The archiving callback is now called in a short-lived memory
context that the archiver process resets between invocations. If a
module requires longer-lived storage, it must maintain its own
memory context.
Thanks to these changes, the basic_archive module can be greatly
simplified.
Suggested-by: Andres Freund
Reviewed-by: Andres Freund, Yong Li
Discussion: https://postgr.es/m/20230217215624.GA3131134%40nathanxps13
Previously, when selecting the transaction to evict during logical
decoding, we check all transactions to find the largest
transaction. This could lead to a significant replication lag
especially in the case where there are many subtransactions.
This commit improves the eviction algorithm in ReorderBuffer using the
max-heap with transaction size as the key to efficiently find the
largest transaction.
The max-heap starts with empty. While the max-heap is empty, we don't
do anything for the max-heap when updating the memory
counter. Therefore, we get the largest transaction in O(N) time, where
N is the number of transactions including top-level transactions and
subtransactions.
We build the max-heap just before selecting the largest transactions
if the number of transactions being decoded is higher than the
threshold, MAX_HEAP_TXN_COUNT_THRESHOLD. After building the max-heap,
we also update the max-heap when updating the memory counter. The
intention is to efficiently find the largest transaction in O(1) time
instead of incurring the cost of memory counter updates (O(log
N)). Once the number of transactions got lower than the threshold, we
reset the max-heap.
The performance benchmark results showed significant speed up (more
than x30 speed up on my machine) in decoding a transaction with 100k
subtransactions, whereas there is no visible overhead in other cases.
Reviewed-by: Amit Kapila, Hayato Kuroda, Vignesh C, Ajin Cherian,
Tomas Vondra, Shubham Khanna, Peter Smith, Álvaro Herrera,
Euler Taveira
Discussion: https://postgr.es/m/CAD21AoAfKTgrBrLq96GcTv9d6k97zaQcDM-rxfKEt4GSe0qnaQ%40mail.gmail.com
David Rowley
Amit Kapila
Alexander Korotkov
Michael Paquier
Masahiko Sawada
Thomas Munro
Peter Eisentraut
John Naylor
Heikki Linnakangas
Amit Langote
Andres Freund
Peter Geoghegan
Tom Lane
Alvaro Herrera
Nathan Bossart
Tomas Vondra
Andrew Dunstan
Jeff Davis
Daniel Gustafsson