We have had multiple reports that point to the
'@colReorder=latn-digit' collation customization being buggy. We have
reported this to ICU and are waiting for a fix. In the meantime,
remove references to this from the documentation and replace it by
another reordering example. Apparently, many users have been picking
up this example specifically from the documentation.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://www.postgresql.org/message-id/flat/153201618542.1404.3611626898935613264%40wrigleys.postgresql.org
The previous version of the docs mentioned that files are rewritten,
implying that a second copy of each file gets created, but each file is
updated in-place.
Author: Michael Banck
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/858086b6a42fb7d17995b6175856f7e7ec44d0a2.camel@credativ.de
Backpatch-through: 12
We were already raising an error for DROP INDEX CONCURRENTLY on a
partitioned table, albeit a different and confusing one:
ERROR: DROP INDEX CONCURRENTLY must be first action in transaction
Change that to throw a more comprehensible error:
ERROR: cannot drop partitioned index \"%s\" concurrently
Michael Paquier authored the test case for indexes on temporary
partitioned tables.
Backpatch to 11, where indexes on partitioned tables were added.
Reported-by: Jan Mussler <jan.mussler@zalando.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16594-d2956ca909585067@postgresql.org
Back-patch key parts of 4c5cf5431 and 6ca547cf7 into stable branches.
I didn't touch pg_description entries here, so it's purely a docs
change; and I didn't fool with any examples either. The main point
is so that anyone who's wondering if factorial() exists in the stable
branches will be reassured.
Mark Dilger and John Naylor, with some adjustments by me
Discussion: https://postgr.es/m/BE2DF53D-251A-4E26-972F-930E523580E9@enterprisedb.com
When the leftover invalid index is "ccold", there's no need to re-run
the command. Reword the instructions to make that explicit.
Backpatch to 12, where REINDEX CONCURRENTLY appeared.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/20200819211312.GA15497@alvherre.pgsql
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
In "High Availability, Load Balancing, and Replication" chapter,
certain descriptions of Pgpool-II were not correct at this point. It
does not need conflict resolution. Also "Multiple-Server Parallel
Query Execution" is not supported anymore.
Discussion: https://postgr.es/m/20200726.230128.53842489850344110.t-ishii%40sraoss.co.jp
Author: Tatsuo Ishii
Reviewed-by: Bruce Momjian
Backpatch-through: 9.5
Partitioned indexes are also registered in pg_inherits, but the
description of this catalog did not reflect that.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87k0ynj35y.fsf@wibble.ilmari.org
Backpatch-through: 11
TLS 1.3 uses a different way of specifying ciphers and a different
OpenSSL API. PostgreSQL currently does not support setting those
ciphers. For now, just document this. In the future, support for
this might be added somehow.
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
The executor checks for this error, and so does the bootstrap catalog
loader, but we never checked for it in retail catalog manipulations.
The folly of that has now been exposed, so let's add assertions
checking it. Checking in CatalogTupleInsert[WithInfo] and
CatalogTupleUpdate[WithInfo] should be enough to cover this.
Back-patch to v10; the aforesaid functions didn't exist before that,
and it didn't seem worth adapting the patch to the oldest branches.
But given the risk of JIT crashes, I think we certainly need this
as far back as v11.
Pre-v13, we have to explicitly exclude pg_subscription.subslotname
and pg_subscription_rel.srsublsn from the checks, since they are
mismarked. (Even if we change our mind about applying BKI_FORCE_NULL
in the branch tips, it doesn't seem wise to have assertions that
would fire in existing databases.)
Discussion: https://postgr.es/m/298837.1595196283@sss.pgh.pa.us
This coding technique is unsafe, since we'd be accessing off the end
of the tuple if the field is null. SIGSEGV is pretty improbable, but
perhaps not impossible. Also, returning garbage for the LSN doesn't
seem like a great idea, even if callers aren't looking at it today.
Also update docs to point out explicitly that
pg_subscription.subslotname and pg_subscription_rel.srsublsn
can be null.
Perhaps we should mark these two fields BKI_FORCE_NULL, so that
they'd be correctly labeled in databases that are initdb'd in the
future. But we can't force that for existing databases, and on
balance it's not too clear that having a mix of different catalog
contents in the field would be wise.
Apply to v10 (where this code came in) through v12. Already
fixed in v13 and HEAD.
Discussion: https://postgr.es/m/732838.1595278439@sss.pgh.pa.us
pg_dump produces custom-format archive files that lack data offsets
when it is unable to seek its output. Up to now that's been a hazard
for pg_restore. But if pg_restore is able to seek in the archive
file, there is no reason to throw up our hands when asked to restore
data blocks out of order. Instead, whenever we are searching for a
data block, record the locations of the blocks we passed over (that
is, fill in the missing data-offset fields in our in-memory copy of
the TOC data). Then, when we hit a case that requires going
backwards, we can just seek back.
Also track the furthest point that we've searched to, and seek back
to there when beginning a search for a new data block. This avoids
possible O(N^2) time consumption, by ensuring that each data block
is examined at most twice. (On Unix systems, that's at most twice
per parallel-restore job; but since Windows uses threads here, the
threads can share block location knowledge, reducing the amount of
duplicated work.)
We can also improve the code a bit by using fseeko() to skip over
data blocks during the search.
This is all of some use even in simple restores, but it's really
significant for parallel pg_restore. In that case, we require
seekability of the input already, and we will very probably need
to do out-of-order restores.
Back-patch to v12, as this fixes a regression introduced by commit
548e50976. Before that, parallel restore avoided requesting
out-of-order restores, so it would work on a data-offset-less
archive. Now it will again.
Ideally this patch would include some test coverage, but there are
other open bugs that need to be fixed before we can extend our
coverage of parallel restore very much. Plan to revisit that later.
David Gilman and Tom Lane; reviewed by Justin Pryzby
Discussion: https://postgr.es/m/CALBH9DDuJ+scZc4MEvw5uO-=vRyR2=QF9+Yh=3hPEnKHWfS81A@mail.gmail.com
Re-point comp.ai.genetic FAQ link to a more stable address.
Remove stale links to AIX documentation; we don't really need to
tell AIX users how to use their systems.
Remove stale links to HP documentation about SSL. We've had to
update those twice before, making it increasingly obvious that
HP does not intend them to be stable landing points. They're
not particularly authoritative, either. (This change effectively
reverts bbd3bdba3.)
Daniel Gustafsson and Álvaro Herrera, per a gripe from
Kyotaro Horiguchi. Back-patch, since these links are
just as dead in the back branches.
Discussion: https://postgr.es/m/20200709.161226.204639179120026914.horikyota.ntt@gmail.com
pg_stat_activity.query text is truncated at 1024 bytes. But previously
the document described that it's truncated at 1024 characters.
This was not accurate when considering multibyte characters.
Back-patch to v10 where this inaccurate description was added.
Author: Atsushi Torikoshi
Reviewed-by: Daniel Gustafsson, Fujii Masao
Discussion: https://postgr.es/m/cd5b49a5a14e887542f5f569c1c6bde2@oss.nttdata.com
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
Warnings start 10M transactions before xidStopLimit, which is 11M
transactions before wraparound. The sample WARNING output showed a
value greater than 11M, and its HINT message predated commit
25ec228ef7. Hence, the sample was
impossible. Back-patch to 9.5 (all supported versions).
The IANA time zone folk have deprecated use of a "posixrules" file in
the tz database. While for now it's our choice whether to keep
supplying one in our own builds, installations built with
--with-system-tzdata will soon be needing to cope with that file not
being present, at least on some platforms.
This causes a problem for the horology test, which expected the
nonstandard POSIX zone spec "CST7CDT" to apply pre-2007 US daylight
savings rules. That does happen if the posixrules file supplies such
information, but otherwise the test produces undesired results.
To fix, add an explicit transition date rule that matches 2005 practice.
(We could alternatively have switched the test to use some real time
zone, but it seems useful to have coverage of this type of zone spec.)
While at it, update a documentation example that also relied on
"CST7CDT"; use a real-world zone name instead. Also, document why
the zone names EST5EDT, CST6CDT, MST7MDT, PST8PDT aren't subject to
similar failures when "posixrules" is missing.
Back-patch to all supported branches, since the hazard is the same
for all.
Discussion: https://postgr.es/m/1665379.1592581287@sss.pgh.pa.us
We'd glossed over most of this complexity for years, but it's hard
to avoid writing it all down now, so that we can explain what happens
when there's no "posixrules" file in the IANA time zone database.
That was at best a tiny minority situation till now, but it's likely
to become quite common in the future, so we'd better explain it.
Nonetheless, we don't really encourage people to use POSIX zone specs;
picking a named zone is almost always what you really want, unless
perhaps you're stuck with an out-of-date zone database. Therefore,
let's shove all this detail into an appendix.
Patch by me; thanks to Robert Haas for help with some awkward wording.
Discussion: https://postgr.es/m/1390.1562258309@sss.pgh.pa.us
Our documentation failed to point out that REPEATABLE READ is really
snapshot isolation, which might be important to some users. Point to
the standard reference paper for this complicated topic.
Likewise, add a reference to the VLDB paper about PostgreSQL SSI, for
technical information about our SSI implementation and how it compares
to S2PL.
While here, add a note about catalog access using a lower isolation
level, per recent user complaint.
Back-patch to all releases.
Reported-by: Kyle Kingsbury <aphyr@jepsen.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
Discussion: https://postgr.es/m/16454-9408996bb1750faf%40postgresql.org
In PostgreSQL 10, we stopped using System V semaphores on Linux
systems. Update the example we give of an error message from a
misconfigured system to show what people are most likely to see these
days.
Back-patch to 10, where PREFERRED_SEMAPHORES=UNNAMED_POSIX arrived.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGLmJUSwybaPQv39rB8ABpqJq84im2UjZvyUY4feYhpWMw%40mail.gmail.com
The group of wal_init_zero and wal_recycle is WAL_SETTINGS in guc.c,
but previously their documents were located in
"Replication"/"Sending Servers" section. This commit moves them to
the proper section "Write Ahead Log"/"Settings".
Back-patch to v12 where wal_init_zero and wal_recycle parameters
were introduced.
Author: Fujii Masao
Discussion: https://postgr.es/m/b5190ab4-a169-6a42-0e49-aed0807c8976@oss.nttdata.com
The documentation of REINDEX includes a complete description of
CONCURRENTLY and its advantages as well as its disadvantages, but
reindexdb was not really clear about all that.
From discussion with Tom Lane, based on a report from Andrey Klychkov.
Discussion: https://postgr.es/m/1590486572.205117372@f500.i.mail.ru
Backpatch-through: 12
These were missed when these were added to pg_hba.conf in PG 12;
updates docs and pg_hba.conf.sample.
Reported-by: Arthur Nascimento
Bug: 16380
Discussion: https://postgr.es/m/20200421182736.GG19613@momjian.us
Backpatch-through: 12
The description missed a comma and lacked an explanation of what happens
with REPLICA IDENTITY USING INDEX when the dependent index is dropped.
Author: Marina Polyakova
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/ad1a0badc32658b1bbb07aa312346a1d@postgrespro.ru
Backpatch-through: 9.5
Moving this setting into the main configuration file was ill-considered,
perhaps, because that typically causes it to be set before
timezone_abbreviations has been set. Which in turn means that zone
abbreviations don't work, only full zone names.
We could imagine hacking things so that such cases do work, but the
stability of the hack would be questionable, and the value isn't really
that high. Instead just document that you should use a numeric zone
offset or a full zone name.
Per bug #16404 from Reijo Suhonen.
Back-patch to v12 where this was changed.
Discussion: https://postgr.es/m/16404-4603a99603fbd04c@postgresql.org
Add a couple of lines to make it explicit that indexes, constraints,
triggers are added, removed, or left alone.
Backpatch to pg11.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200421162038.GA18628@alvherre.pgsql
When a partition is detached, any triggers that had been cloned from its
parent were not properly disentangled from its parent triggers.
This resulted in triggers that could not be dropped because they
depended on the trigger in the trigger in the no-longer-parent table:
ALTER TABLE t DETACH PARTITION t1;
DROP TRIGGER trig ON t1;
ERROR: cannot drop trigger trig on table t1 because trigger trig on table t requires it
HINT: You can drop trigger trig on table t instead.
Moreover the table can no longer be re-attached to its parent, because
the trigger name is already taken:
ALTER TABLE t ATTACH PARTITION t1 FOR VALUES FROM (1)TO(2);
ERROR: trigger "trig" for relation "t1" already exists
The former is a bug introduced in commit 86f575948c. (The latter is
not necessarily a bug, but it makes the bug more uncomfortable.)
To avoid the complexity that would be needed to tell whether the trigger
has a local definition that has to be merged with the one coming from
the parent table, establish the behavior that the trigger is removed
when the table is detached.
Backpatch to pg11.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/20200408152412.GZ2228@telsasoft.com
Commit ac8623760 "fixed" a typo in an example of what would happen in
the event of a typo. Restore the original typo and add a comment about
its intentionality. Backpatch to 12 where the error was introduced.
Per report from irc user Nicolás Alvarez.
The docs explained that a SHARE ROW EXCLUSIVE lock is needed on the
referenced table, but failed to say the same about the table being
altered. Since the page says that ACCESS EXCLUSIVE lock is taken
unless otherwise stated, this left readers with the wrong conclusion.
Discussion: https://postgr.es/m/834603375.3470346.1586482852542@mail.yahoo.com
CREATE GROUP is an exact alias for CREATE ROLE, and CREATE USER is
almost an exact alias, as can easily be confirmed by checking the
code. So the man page syntax descriptions ought to match up. The
last few additions of role options seem to have forgotten to update
create_group.sgml, though. Fix that, and add a naggy reminder to
create_role.sgml in hopes of not forgetting again.
Discussion: https://postgr.es/m/158647836143.655.9853963229391401576@wrigleys.postgresql.org
The documentation says that the max length is 255 bytes, but
code inspection says it's actually 255 characters; and relevant
lengths are stored as uint16 so that that works.
These uint16 fields could be overflowed by excessively long input,
producing strange results. Complain for invalid input.
Likewise check for out-of-range values of the repeat counts in lquery.
(We don't try too hard on that one, notably not bothering to detect
if atoi's result has overflowed.)
Also detect length overflow in ltree_concat.
In passing, be more consistent about whether "syntax error" messages
include the type name. Also, clarify the documentation about what
the size limit is.
This has been broken for a long time, so back-patch to all supported
branches.
Nikita Glukhov, reviewed by Benjie Gillam and Tomas Vondra
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
Now that we require C99, we can depend on __VA_ARGS__ to work, and
revising ereport() to use it has several significant benefits:
* The extra parentheses around the auxiliary function calls are now
optional. Aside from being a bit less ugly, this removes a common
gotcha for new contributors, because in some cases the compiler errors
you got from forgetting them were unintelligible.
* The auxiliary function calls are now evaluated as a comma expression
list rather than as extra arguments to errfinish(). This means that
compilers can be expected to warn about no-op expressions in the list,
allowing detection of several other common mistakes such as forgetting
to add errmsg(...) when converting an elog() call to ereport().
* Unlike the situation with extra function arguments, comma expressions
are guaranteed to be evaluated left-to-right, so this removes platform
dependency in the order of the auxiliary function calls. While that
dependency hasn't caused us big problems in the past, this change does
allow dropping some rather shaky assumptions around errcontext() domain
handling.
There's no intention to make wholesale changes of existing ereport
calls, but as proof-of-concept this patch removes the extra parens
from a couple of calls in postgres.c.
While new code can be written either way, code intended to be
back-patched will need to use extra parens for awhile yet. It seems
worth back-patching this change into v12, so as to reduce the window
where we have to be careful about that by one year. Hence, this patch
is careful to preserve ABI compatibility; a followup HEAD-only patch
will make some additional simplifications.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
src/port/getopt_long.c failed on such an argument, always seeing it
as an unrecognized switch. This is unhelpful; better is to treat such
an item as a non-switch argument. That behavior is what we find in
GNU's getopt_long(); it's what src/port/getopt.c does; and it is
required by POSIX for getopt(), which getopt_long() ought to be
generally a superset of. Moreover, it's expected by ecpg, which
intends an argument of "-" to mean "read from stdin". So fix it.
Also add some documentation about ecpg's behavior in this area, since
that was miserably underdocumented. I had to reverse-engineer it
from the code.
Per bug #16304 from James Gray. Back-patch to all supported branches,
since this has been broken forever.
Discussion: https://postgr.es/m/16304-c662b00a1322db7f@postgresql.org
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This commit corrects the descriptions of RecoveryWalAll and RecoveryWalStream
wait events in the documentation.
Back-patch to v10 where those wait events were added.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
I noticed that we completely failed to document the restriction
that an "anyrange" result type has to be inferred from an "anyrange"
input. The docs also were less clear than they could be about the
relationship between "anyrange" and "anyarray".
It's been like this all along, so back-patch.
If pkg-config is installed and knows about libxml2, use its information
rather than asking xml2-config. Otherwise proceed as before. This
patch allows "configure --with-libxml" to succeed on platforms that
have pkg-config but not xml2-config, which is likely to soon become
a typical situation.
The old mechanism can be forced by setting XML2_CONFIG explicitly
(hence, build processes that were already doing so will certainly
not need adjustment). Also, it's now possible to set XML2_CFLAGS
and XML2_LIBS explicitly to override both programs.
There is a small risk of this breaking existing build processes,
if there are multiple libxml2 installations on the machine and
pkg-config disagrees with xml2-config about which to use. The
only case where that seems really likely is if a builder has tried
to select a non-default xml2-config by putting it early in his PATH
rather than setting XML2_CONFIG. Plan to warn against that in the
minor release notes.
Back-patch to v10; before that we had no pkg-config infrastructure,
and it doesn't seem worth adding it for this.
Hugh McMaster and Tom Lane; Peter Eisentraut also made an earlier
attempt at this, from which I lifted most of the docs changes.
Discussion: https://postgr.es/m/CAN9BcdvfUwc9Yx5015bLH2TOiQ-M+t_NADBSPhMF7dZ=pLa_iw@mail.gmail.com
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
It's strange that a directory-listing function does not list all entries
in a directory, so let's at least document it. This involves
pg_ls_logdir
pg_ls_waldir
pg_ls_archive_statusdir
pg_ls_tmpdir
Backpatch as far back as it applies cleanly (and as far as as each
function exists). REL_10_STABLE uses different wording, but hopefully
people are not reading docs so old to write new apps anyway.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200305161838.GJ684@telsasoft.com
This should of course be just "PG_ARGISNULL()".
Also reorder a couple of paras to make the discussion of PG_ARGISNULL
less disjointed.
Back-patch to v10 where the error was introduced.
Laurenz Albe and Tom Lane, per an anonymous docs comment
Discussion: https://postgr.es/m/158399487096.5708.10696365251766477013@wrigleys.postgresql.org
This addresses a couple of issues in the documentation:
- Description of PG_COLOR was missing for some tools (pg_archivecleanup
and pg_test_fsync), while the other descriptions had grammar mistakes.
- pgbench supports more environment variables: PGUSER, PGHOST and
PGPORT.
- vacuumlo, oid2name and pgbench support coloring (HEAD only)
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Daniel Gustafsson, Juan José Santamaría
Flecha
Discussion: https://postgr.es/m/20200304075418.GJ2593@paquier.xyz
Backpatch-through: 12
Previously the documentation explains that WAL segment files
start at 000000010000000000000000. But the first WAL segment file
that initdb creates is 000000010000000000000001 not
000000010000000000000000. This change was caused by old
commit 8c843fff2d, but the documentation had not been updated
a long time.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: David Zhang
Discussion: https://postgr.es/m/CAHGQGwHOmGe2OqGOmp8cOfNVDivq7dbV74L5nUGr+3eVd2CU2Q@mail.gmail.com
Access to this module is granted to the pg_monitor role, not
pg_read_all_stats. (Given the view's performance impact,
it seems wise to be restrictive, so I think this was the
correct decision --- and anyway it was clearly intentional.)
Per bug #16279 from Philip Semanchuk.
Discussion: https://postgr.es/m/16279-fcaac33c68aab0ab@postgresql.org
The documentation included some outdated instructions to change the
architecture, build type or target OS of a build done with MSVC. This
commit updates the documentation to include the modern options
available, down to Visual Studio 2013.
Reported-by: Kyotaro Horiguchi
Author: Juan José Santamaría Flecha
Discussion: https://postgr.es/m/CAC+AXB0J7tAqW_2F1fCE4Dh2=Ccz96TcLpsGXOCvka7VvWG9Qw@mail.gmail.com
Backpatch-through: 12
Creating a bunch of non-overlapping partial indexes is generally
a bad idea, so add an example saying not to do that.
Back-patch to v10. Before that, the alternative of using (real)
partitioning wasn't available, so that the tradeoff isn't quite
so clear cut.
Discussion: https://postgr.es/m/CAKVFrvFY-f7kgwMRMiPLbPYMmgjc8Y2jjUGK_Y0HVcYAmU6ymg@mail.gmail.com
This commit also updates wait event enum into alphabetical order.
Previously the enum entry for GSSOpenServer was added out-of-order.
Back-patch to v12 where commit b0b39f72b9 introduced
GSSOpenServer wait event. In v12, the commit doesn't include
the update of wait event enum, not to break ABI.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/949931aa-4ed4-d867-a7b5-de9c02b2292b@oss.nttdata.com
The GRANTED BY clause in GRANT/REVOKE ROLE has been there since 2005
but was never documented. I'm not sure now whether that was just an
oversight or was intentional (given the limited capability of the
option). But seeing that pg_dumpall does emit code that uses this
option, it seems like not documenting it at all is a bad idea.
Also, when we upgraded the syntax to allow CURRENT_USER/SESSION_USER
as the privilege recipient, the role form of GRANT was incorrectly
not modified to show that, and REVOKE's docs weren't touched at all.
Although I'm not that excited about GRANTED BY, the other oversight
seems serious enough to justify a back-patch.
Discussion: https://postgr.es/m/3070.1581526786@sss.pgh.pa.us
When running TRUNCATE CASCADE on a child of a partitioned table
referenced by another partitioned table, the truncate was not applied to
partitions of the referencing table; this could leave rows violating the
constraint in the referencing partitioned table. Repair by walking the
pg_constraint chain all the way up to the topmost referencing table.
Note: any partitioned tables containing FKs that reference other
partitioned tables should be checked for possible violating rows, if
TRUNCATE has occurred in partitions of the referenced table.
Reported-by: Christophe Courtois
Author: Jehan-Guillaume de Rorthais
Discussion: https://postgr.es/m/20200204183906.115f693e@firost
Inherited queries perform access permission checks on the parent
table only. But there are two exceptions to this rule in v12 or before;
TRUNCATE and LOCK TABLE commands through a parent table check
the permissions on not only the parent table but also the children
tables. Previously these exceptions were not documented.
This commit adds the note about these exceptions, into the document.
Back-patch to v9.4. But we don't apply this commit to the master
because commit e6f1e560e4 already got rid of the exception about
inherited TRUNCATE and upcoming commit will do for the exception
about inherited LOCK TABLE.
Author: Amit Langote
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+HiwqHfTnMU6SUkyHxCmpHUKk7ERLHCR3vZVq19ZOQBjPBLmQ@mail.gmail.com
The docs are ambiguous as to which tables would be copied over when the
copy_data parameter is true in ALTER SUBSCRIPTION ... REFRESH PUBLICATION.
Make it clear that it only applies to tables which are new in the
publication.
Author: David Christensen (reword by Álvaro Herrera)
Discussion: https://postgr.es/m/95339420-7F09-4F8C-ACC0-8F1CFAAD9CD7@endpoint.com
Column defaults may be specified separately for each partition.
But INSERT via a partitioned table ignores those partition's default values.
The former is documented, but the latter restriction not.
This commit adds the note about that restriction into the document.
Back-patch to v10 where partitioning was introduced.
Author: Fujii Masao
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/CAHGQGwEs-59omrfGF7hOHz9iMME3RbKy5ny+iftDx3LHTEn9sA@mail.gmail.com
Advancing a physical replication slot with pg_replication_slot_advance()
did not mark the slot as dirty if any advancing was done, preventing the
follow-up checkpoint to flush the slot data to disk. This caused the
advancing to be lost even on clean restarts. This does not happen for
logical slots as any advancing marked the slot as dirty. Per
discussion, the original feature has been implemented so as in the event
of a crash the slot may move backwards to a past LSN. This property is
kept and more documentation is added about that.
This commit adds some new TAP tests to check the persistency of physical
and logical slots after advancing across clean restarts.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Craig Ringer
Discussion: https://postgr.es/m/059cc53a-8b14-653a-a24d-5f867503b0ee@postgrespro.ru
Backpatch-through: 11
Attempting to use CREATE INDEX, DROP INDEX or REINDEX with CONCURRENTLY
on a temporary relation with ON COMMIT actions triggered unexpected
errors because those operations use multiple transactions internally to
complete their work. Here is for example one confusing error when using
ON COMMIT DELETE ROWS:
ERROR: index "foo" already contains data
Issues related to temporary relations and concurrent indexing are fixed
in this commit by enforcing the non-concurrent path to be taken for
temporary relations even if using CONCURRENTLY, transparently to the
user. Using a non-concurrent path does not matter in practice as locks
cannot be taken on a temporary relation by a session different than the
one owning the relation, and the non-concurrent operation is more
effective.
The problem exists with REINDEX since v12 with the introduction of
CONCURRENTLY, and with CREATE/DROP INDEX since CONCURRENTLY exists for
those commands. In all supported versions, this caused only confusing
error messages to be generated. Note that with REINDEX, it was also
possible to issue a REINDEX CONCURRENTLY for a temporary relation owned
by a different session, leading to a server crash.
The idea to enforce transparently the non-concurrent code path for
temporary relations comes originally from Andres Freund.
Reported-by: Manuel Rigger
Author: Michael Paquier, Heikki Linnakangas
Reviewed-by: Andres Freund, Álvaro Herrera, Heikki Linnakangas
Discussion: https://postgr.es/m/CA+u7OA6gP7YAeCguyseusYcc=uR8+ypjCcgDDCTzjQ+k6S9ksQ@mail.gmail.com
Backpatch-through: 9.4
We realized years ago that it's better for libpq to accept all
connection parameters syntactically, even if some are ignored or
restricted due to lack of the feature in a particular build.
However, that lesson from the SSL support was for some reason never
applied to the GSSAPI support. This is causing various buildfarm
members to have problems with a test case added by commit 6136e94dc,
and it's just a bad idea from a user-experience standpoint anyway,
so fix it.
While at it, fix some places where parameter-related infrastructure
was added with the aid of a dartboard, or perhaps with the aid of
the anti-pattern "add new stuff at the end". It should be safe
to rearrange the contents of struct pg_conn even in released
branches, since that's private to libpq (and we'd have to move
some fields in some builds to fix this, anyway).
Back-patch to all supported branches.
Discussion: https://postgr.es/m/11297.1576868677@sss.pgh.pa.us
The "auth-methods" <sect1> used to include descriptions of all our
authentication methods. Commit 56811e573 promoted its child <sect2>'s
to <sect1>'s, which has advantages but also created some issues:
* The auth-methods page itself is essentially empty/useless.
* Links that pointed to "auth-methods" as a placeholder for all
auth methods were rendered a bit nonsensical.
* DocBook no longer provides a subsection table-of-contents here,
which formerly was a useful if terse summary of available auth methods.
To improve matters, add a handwritten list of all the auth methods.
Per gripe from Dave Cramer. Back-patch to v11 where the previous
commit came in.
Discussion: https://postgr.es/m/CADK3HH+xQLhcPgg=kWqfogtXGGZr-JdSo=x=WQC0PkAVyxUWyQ@mail.gmail.com
AfterTriggerExecute() retrieves a fresh tuple or pair of tuples from a
tuplestore and then stores the tuple(s) in the passed-in slot(s) if
AFTER_TRIGGER_FDW_FETCH, while it uses the most-recently-retrieved
tuple(s) stored in the slot(s) if AFTER_TRIGGER_FDW_REUSE. This was
done correctly before 12, but commit ff11e7f4b broke it by mistakenly
clearing the tuple(s) stored in the slot(s) in that function, leading to
an assertion failure as reported in bug #16139 from Alexander Lakhin.
Also, fix some other issues with the aforementioned commit in passing:
* For tg_newslot, which is a slot added to the TriggerData struct by the
commit to store new updated tuples, it didn't ensure the slot was NULL
if there was no such tuple.
* The commit failed to update the documentation about the trigger
interface.
Author: Etsuro Fujita
Backpatch-through: 12
Discussion: https://postgr.es/m/16139-94f9ccf0db6119ec%40postgresql.org
Commit 5770172cb0 wrote, incorrectly, that
certain schema usage patterns are secure against CREATEROLE users and
database owners. When an untrusted user is the database owner or holds
CREATEROLE privilege, a query is secure only if its session started with
SELECT pg_catalog.set_config('search_path', '', false) or equivalent.
Back-patch to 9.4 (all supported versions).
Discussion: https://postgr.es/m/20191013013512.GC4131753@rfd.leadboat.com
The existing text stated that "Default privileges that are specified
per-schema are added to whatever the global default privileges are for
the particular object type". However, that bare-bones observation is
not quite clear enough, as demonstrated by the complaint in bug #16124.
Flesh it out by stating explicitly that you can't revoke built-in
default privileges this way, and by providing an example to drive
the point home.
Back-patch to all supported branches, since it's been like this
from the beginning.
Discussion: https://postgr.es/m/16124-423d8ee4358421bc@postgresql.org
Commit 6b76f1bb5 changed all the RADIUS auth parameters to be lists
rather than single values. But its use of SplitIdentifierString
to parse the list format was not very carefully thought through,
because that function thinks it's parsing SQL identifiers, which
means it will (a) downcase the strings and (b) truncate them to
be shorter than NAMEDATALEN. While downcasing should be harmless
for the server names and ports, it's just wrong for the shared
secrets, and probably for the NAS Identifier strings as well.
The truncation aspect is at least potentially a problem too,
though typical values for these parameters would fit in 63 bytes.
Fortunately, we now have a function SplitGUCList that is exactly
the same except for not doing the two unwanted things, so fixing
this is a trivial matter of calling that function instead.
While here, improve the documentation to show how to double-quote
the parameter values. I failed to resist the temptation to do
some copy-editing as well.
Report and patch from Marcos David (bug #16106); doc changes by me.
Back-patch to v10 where the aforesaid commit came in, since this is
arguably a regression from our previous behavior with RADIUS auth.
Discussion: https://postgr.es/m/16106-7d319e4295d08e70@postgresql.org
The point is that DELETE triggers cannot modify any values.
Reported-by: Eugen Konkov, Liudmila Mantrova
Discussion: https://postgr.es/m/919823407.20191029175436@yandex.ru
Backpatch-through: 12 only, where commit as missing
The example of expansion of multiple views claimed that the resulting
subquery nest would not get fully flattened because of an aggregate
function. There's no aggregate in the example, though, only a user
defined function confusingly named MIN(). In a modern server, the
reason for the non-flattening is that MIN() is volatile, but I'm
unsure whether that was true back when this text was written.
Let's reduce the confusion level by using LEAST() instead (which
we didn't have at the time this example was created). And then
we can just say that the planner will flatten the sub-queries, so
the rewrite system doesn't have to.
Noted by Paul Jungwirth. This text is old enough to vote, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CA+renyXZFnmp9PcvX1EVR2dR=XG5e6E-AELr8AHCNZ8RYrpnPw@mail.gmail.com
The previous statement that using a passphrase disables the ability to
change the server's SSL configuration without a server restart was no
longer completely true since the introduction of
ssl_passphrase_command_supports_reload.
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first. Note that a
fair percentage of the entries apply only to prior branches because
their issue was already fixed in 12.0. I'll remove those from the 12.1
list later.
Currently, postgres_fdw does not support preparing a remote transaction
for two-phase commit even in the case where the remote transaction is
read-only, but the old error message appeared to imply that that was not
supported only if the remote transaction modified remote tables. Change
the message so as to include the case where the remote transaction is
read-only.
Also fix a comment above the message.
Also add a note about the lack of supporting PREPARE TRANSACTION to the
postgres_fdw documentation.
Reported-by: Gilles Darold
Author: Gilles Darold and Etsuro Fujita
Reviewed-by: Michael Paquier and Kyotaro Horiguchi
Backpatch-through: 9.4
Discussion: https://postgr.es/m/08600ed3-3084-be70-65ba-279ab19618a5%40darold.net
The docs do say which GUCs can be changed only by superusers, but we
forgot to mention this for the new log_transaction_sample_rate. This
GUC was introduced in PostgreSQL 12, so backpatch accordingly.
Author: Adrien Nayrat
Backpatch-through: 12
Since commit d26a810eb, we've defined bool as being either _Bool from
<stdbool.h>, or "unsigned char"; but that commit overlooked the fact
that probes.d has "#define bool char". For consistency, make it say
"unsigned char" instead. This should be strictly a cosmetic change,
but it seems best to be in sync.
Formally, in the now-normal case where we're using <stdbool.h>, it'd
be better to write "#define bool _Bool". However, then we'd need
some build infrastructure to inject that configuration choice into
probes.d, and it doesn't seem worth the trouble. We only use
<stdbool.h> if sizeof(_Bool) is 1, so having DTrace think that
bool parameters are "unsigned char" should be close enough.
Back-patch to v12 where d26a810eb came in.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
Since 898e5e32, this command uses partially ShareUpdateExclusiveLock,
but the docs did not get the call.
Author: Justin Pryzby
Reviewed-by: Amit Langote, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20191028001207.GB23808@telsasoft.com
Backpatch-through: 12
This clarifies more how to use and how to take advantage of constraints
when attaching a new partition.
Author: Justin Pryzby
Reviewed-by: Amit Langote, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20191028001207.GB23808@telsasoft.com
Backpatch-through: 10
When we added the GUC units feature, we didn't make any great effort
to adjust the documentation of individual GUCs; they tended to still
say things like "this is the number of milliseconds that ...", even
though users might prefer to write some other units, and SHOW might
even show the value in other units. Commit 6c9fb69f2 made an effort
to improve this situation, but I thought it made things less readable
by injecting units information in mid-sentence. It also wasn't very
consistent, and did not touch all the GUCs that have units.
To improve matters, standardize on the phrasing "If this value is
specified without units, it is taken as <units>". Also, try to
standardize where this is mentioned, right before the specification
of the default. (In a couple of places, doing that would've required
more rewriting than seemed justified, so I wasn't 100% consistent
about that.) I also tried to use the phrases "amount of time",
"amount of memory", etc rather than describing the contents of GUCs
in other ways, as those were the majority usage in places that weren't
overcommitting to a particular unit. (I left "length of time" alone
in a couple of places, though.)
I failed to resist the temptation to copy-edit some awkward text, too.
Backpatch to v12, like 6c9fb69f2, mainly because v12 hasn't diverged
much from HEAD yet.
Discussion: https://postgr.es/m/15882.1571942223@sss.pgh.pa.us
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
This fixes multiple areas of the documentation:
- COPY for its past compatibility section.
- SET ROLE mentioning INHERITS instead of INHERIT
- PREPARE referring to stmt_name, that is not present.
- Extension documentation about format name with upgrade scripts.
Backpatch down to 9.4 for the relevant parts.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/bf95233a-9943-b341-e2ff-a860c28af481@gmail.com
Backpatch-through: 9.4
Previously, our docs would say "Specifies the number of milliseconds"
but it wasn't clear that "milliseconds" was merely the default unit.
New text says "Specifies duration (defaults to milliseconds)", which is
clearer.
Reported-by: basil.bourque@gmail.com
Discussion: https://postgr.es/m/15912-2e35e9026f61230b@postgresql.org
Backpatch-through: 12
Commit aa087ec64 was a bit over-hasty about the doc changes needed
while splitting pg_statistic_ext_data off from pg_statistic_ext.
It duplicated one para and inserted another in what seems to me
to be the wrong section. Fix that up, and in passing do some minor
copy-editing.
Per report from noborusai.
Discussion: https://postgr.es/m/CAAM3qnLXLUz4mOBkqa8jxigpKhKNxzSuvwpjvCRPvO5EqWjxSg@mail.gmail.com
The behavior described in the PREPARE man page applies only for the
default plan_cache_mode setting, so explain that properly. Rewrite
some of the text while I'm here. Per suggestion from Bruce.
Discussion: https://postgr.es/m/20190930155505.GA21095@momjian.us
This commit adds a mention that the order of columns specified during
multi-column most-common-value statistics is insignificant, and tries to
simplify examples.
Discussion: https://postgr.es/m/20190828162238.GA8360@momjian.us
Backpatch-through: 12
The documentation states that no target settings will be used when
standby.signal is present, but this is not quite the case since
recovery_target_timeline is a valid recovery target for a standby.
Update the documentation with this exception.
Author: David Steele <david@pgmasters.net>
Discussion: https://www.postgresql.org/message-id/flat/e445616d-023e-a268-8aa1-67b8b335340c%40pgmasters.net
The array <@ and @> operators do not worry about duplicates: if every
member of array X matches some element of array Y, then X is contained
in Y, even if several members of X get matched to the same Y member.
This was not explicitly stated in the docs though, so improve matters.
Discussion: https://postgr.es/m/156614120484.1310.310161642239149585@wrigleys.postgresql.org
In the v12 contributors list, remove a couple of duplicates
that had crept in due to variant spellings of a person's name.
Try to standardize Japanese names as given-name-first.
Alexander Lakhin
Discussion: https://postgr.es/m/a8263c91-6a21-61d4-3156-34bf2fe54e15@gmail.com
Remove mention of ECPG's DECLARE STATEMENT, since that was reverted
yesterday. Rewrite some other entries per suggestions from Peter
Eisentraut. Make a couple of desultory wording and markup adjustments.
Discussion: https://postgr.es/m/d4dff575-90ab-9c8c-cc6f-8c657e2de665@2ndquadrant.com
This reverts commit bd7c95f0c1,
along with assorted follow-on fixes. There are some questions
about the definition and implementation of that statement, and
we don't have time to resolve them before v13 release. Rather
than ship the feature and then have backwards-compatibility
concerns constraining any redesign, let's remove it for now
and try again later.
Discussion: https://postgr.es/m/TY2PR01MB2443EC8286995378AEB7D9F8F5B10@TY2PR01MB2443.jpnprd01.prod.outlook.com
Provide some documentation about the differences between XQuery
regular expressions and those supported by Spencer's regex engine.
Since SQL now exposes XQuery regexps with the LIKE_REGEX operator,
I made this a standalone section designed to help somebody who
has to translate a LIKE_REGEX query to Postgres. (Eventually we might
extend Spencer's engine to allow precise implementation of XQuery,
but not today.)
Reference that in the jsonpath docs, provide definitions of the
XQuery flag letters, and add a description of the JavaScript-inspired
string literal syntax used within jsonpath. Also point out explicitly
that backslashes used within like_regex patterns will need to be doubled.
This also syncs the docs with the decision implemented in commit
d5b90cd64 to desupport XQuery's 'x' flag for now.
Jonathan Katz and Tom Lane
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
It's important users be able to know (without looking at the source code)
that running DDL or DDL-like commands can interrupt autovacuum which can
lead to a lot of dead tuples and hence slower database operations.
Reported-by: James Coleman
Author: James Coleman
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAAaqYe-XYyNwML1=f=gnd0qWg46PnvD=BDrCZ5-L94B887XVxQ@mail.gmail.com
1. Commit 7086be6e3 should have documented the limitation that the direct
modification is disabled when WCO constraints are present, but didn't,
which is definitely my fault. Update the documentation (Postgres 9.6
onwards).
2. Commit fc22b6623 should have documented the limitation that the direct
modification is disabled when generated columns are defined, but
didn't. Update the documentation (Postgres 12 onwards).
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK14AYCPunLb6TRz1CQsW5Le01Z2ox8LSOKH0P-cOVDcQRA%40mail.gmail.com
The example used to explain 'Looping Through Query Results' uses
pseudo-materialized views. Replace it with a more up-to-date example
which does the same thing with actual materialized views, which have
been available since PostgreSQL 9.3.
In the passing, change '%' as format specifier instead of '%s' as is used
in other examples in plpgsql.sgml.
Reported-by: Ian Barwick
Author: Ian Barwick
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/9a70d393-7904-4918-c97c-649f6d114b6a@2ndquadrant.com
When using COMMIT AND CHAIN or ROLLBACK AND CHAIN not in an explicit
transaction block, the previous implementation would leave a
transaction block active in the ROLLBACK case but not the COMMIT case.
To fix for now, error out when using these commands not in an explicit
transaction block. This restriction could be lifted if a sensible
definition and implementation is found.
Bug: #15977
Author: fn ln <emuser20140816@gmail.com>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Copy-edit or rewrite some items, add some items that I thought
deserved documenting, remove some others that didn't (notably,
I'm not on board with documenting documentation changes), fix
some poorly-pointed links, move some items to other sections,
etc etc.
I still want to review the rest of the notes, but this seems like the
minimum work required to prepare for beta4.
Major-enhancements text, and a couple of other fixes, from Jonathan Katz
(with minor copy-editing by me).
Clarify in the help output and documentation that -n, -t etc. take a
"pattern" rather than a "schema" or "table" etc. This was especially
confusing now that the new pg_dumpall --exclude-database option was
documented with "pattern" and the others not, even though they all
behave the same.
Discussion: https://www.postgresql.org/message-id/flat/b85f3fa1-b350-38d1-1893-4f7911bd7310%402ndquadrant.com
Section 16.2 pointed to platform-specific FAQ files that we removed
way back in 8.4. Section 16.7 contained a bunch of information about
AIX and HPUX bugs that were squashed decades ago, plus discussions of
old compiler versions that are certainly moot now that we require C99
support. Since we're obviously not maintaining this stuff carefully,
just remove it. The HPUX sub-section seems like it can go away
entirely, since everything it said that was still applicable was
redundant with material elsewhere in the chapter.
In passing, I couldn't resist the temptation to do a small amount
of copy-editing on nearby text.
Back-patch to v12, since this stuff is surely obsolete in any
branch that requires C99.
Discussion: https://postgr.es/m/15538.1567042743@sss.pgh.pa.us
Give it an explanatory para like the other default roles have.
Don't imply that it can send any signal whatever.
In passing, reorder the table entries and explanatory paras
for the default roles into some semblance of consistency.
Ian Barwick, tweaked a bit by me.
Discussion: https://postgr.es/m/89907e32-76f3-7282-a89c-ea19c722fe5d@2ndquadrant.com
Section 4.2.7 says that unless otherwise specified, built-in
aggregates ignore rows in which any input is null. This is
not true of the JSON aggregates, but it wasn't documented.
Fix that.
Of the other entries in table 9.55, some were explicit about
ignoring nulls, and some weren't; for consistency and
self-contained-ness, make them all say it explicitly.
Per bug #15884 from Tim Möhlmann. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/15884-c32d848f787fcae3@postgresql.org
This adds a section for heap-related functions. These were previously
mixed with functions having a more general purpose, leading to
confusion. While on it, add a query example for fsm_page_contents.
Backpatch down to 10, where b5e3942 introduced the subsections for
function types in pageinspect documentation.
Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoDyM7E1+cK3-aWejxKTGC-wVVP2B+RnJhN6inXyeRmqzw@mail.gmail.com
Backpatch-through: 10
VACUUM's reference page had this text, but ANALYZE's didn't. That's
a clear oversight given that section 5.7 explicitly delegates the
responsibility to define permissions requirements to the individual
commands' man pages.
Per gripe from Isaac Morland. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMsGm5fp3oBUs-2iRfii0iEO=fZuJALVyM2zJLhNTjG34gpAVQ@mail.gmail.com
Commit aa27977fe2 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane. Reported by Tom Lane.
Security: CVE-2019-10208
This reverts commit 88bdbd3f74.
As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
Discussion: https://postgr.es/m/CAFj8pRDS8tQ3Wviw9%3DAvODyUciPSrGeMhJi_WPE%2BEB8%2B4gLL-Q%40mail.gmail.com
The table has not been updated for some commands introduced in recent
releases, so refresh it. While on it, reorder entries alphabetically.
Backpatch all the way down for all the commands which have gone
missing.
Reported-by: Jeremy Smith
Discussion: https://postgr.es/m/15883-afff0ea3cc2dbbb6@postgresql.org
Backpatch-through: 9.4
Using pg_receivewal with synchronous_commit = remote_apply set in the
backend is incompatible if pg_receivewal is a synchronous standby as it
never applies WAL, so document this problem and solutions to it.
Backpatch to 9.6, where remote_apply has been added.
Author: Robert Haas, Jesper Pedersen
Reviewed-by: Laurenz Albe, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/1427a2d3-1e51-9335-1931-4f8853d90d5e@redhat.com
Backpatch-through: 9.6
16828d5 has improved ALTER TABLE so as a column addition does not
require a rewrite for a non-NULL default with constant expressions, but
one spot in the documentation did not get updated consistently.
The documentation also now clarifies the fact that this does not apply
if the expression is volatile, where a table rewrite is still required.
Reported-by: Daniel Westermann
Author: Ian Barwick
Reviewed-by: Michael Paquier, Daniel Westermann
Discussion: https://postgr.es/m/DB6PR0902MB2184C7D5645CF15D75EB7957D2CF0@DB6PR0902MB2184.eurprd09.prod.outlook.com
Backpatch-through: 11
The documentation mentioned that data checksums cannot be changed after
initialization, which is not true as pg_checksums can do that with its
--enable option introduced in v12. This simply removes the sentence
telling so.
Reported-by: Basil Bourque
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/15909-e9d74271f1647472@postgresql.org
Backpatch-through: 12