Commit 8431e296ea reworked ProcArrayApplyRecoveryInfo to sort XIDs
before adding them to KnownAssignedXids. But the XIDs are sorted using
xidComparator, which compares the XIDs simply as uint32 values, not
logically. KnownAssignedXidsAdd() however expects XIDs in logical order,
and calls TransactionIdFollowsOrEquals() to enforce that. If there are
XIDs for which the two orderings disagree, an error is raised and the
recovery fails/restarts.
Hitting this issue is fairly easy - you just need two transactions, one
started before the 4B limit (e.g. XID 4294967290), the other sometime
after it (e.g. XID 1000). Logically (4294967290 <= 1000) but when
compared using xidComparator we try to add them in the opposite order.
Which makes KnownAssignedXidsAdd() fail with an error like this:
ERROR: out-of-order XID insertion in KnownAssignedXids
This only happens during replica startup, while processing RUNNING_XACTS
records to build the snapshot. Once we reach STANDBY_SNAPSHOT_READY, we
skip these records. So this does not affect already running replicas,
but if you restart (or create) a replica while there are transactions
with XIDs for which the two orderings disagree, you may hit this.
Long-running transactions and frequent replica restarts increase the
likelihood of hitting this issue. Once the replica gets into this state,
it can't be started (even if the old transactions are terminated).
Fixed by sorting the XIDs logically - this is fine because we're dealing
with normal XIDs (because it's XIDs assigned to backends) and from the
same wraparound epoch (otherwise the backends could not be running at
the same time on the primary node). So there are no problems with the
triangle inequality, which is why xidComparator compares raw values.
Investigation and root cause analysis by Abhijit Menon-Sen. Patch by me.
This issue is present in all releases since 9.4, however releases up to
9.6 are EOL already so backpatch to 10 only.
Reviewed-by: Abhijit Menon-Sen
Reviewed-by: Alvaro Herrera
Backpatch-through: 10
Discussion: https://postgr.es/m/36b8a501-5d73-277c-4972-f58a4dce088a%40enterprisedb.com
The server expects the compression level to be between 1 and 9, but
Z_DEFAULT_COMPRESSION is -1, so we must not try to send that value
to the server.
Because pg_basebackup's -R option is implemented on the client side,
it can't be used in combination with a backup target. Error out if
someone tries that, instead of silently ignoring the option.
Both issues were reported by Tushar Ahuja; patch by me.
Discussion: http://postgr.es/m/CA+TgmoaMwgdx8HxBjF8hmbohVvPL_0H5LqNrSq0uU+7BKp_Q2A@mail.gmail.com
Perl instances on some msys toolchains (e.g. UCRT64) have their
configured osname set to 'MSWin32' rather than 'msys'. The test for
the msys2 platform is adjusted accordingly.
Backpatch to release 14.
This changes the data type of the catalog fields datcollate, datctype,
collcollate, and collctype from name to text. There wasn't ever a
really good reason for them to be of type name; presumably this was
just carried over from when they were fixed-size fields in pg_control,
first into the corresponding pg_database fields, and then to
pg_collation. The values are not identifiers or object names, and we
don't ever look them up that way.
Changing to type text saves space in the typical case, since locale
names are typically only a few bytes long. But it is also possible
that an ICU locale name with several customization options appended
could be longer than 63 bytes, so this also enables that case, which
was previously probably broken.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a@2ndquadrant.com
Commit 27e1f1456 failed to process a pending asynchronous request made
for a given ForeignScan node in postgresReScanForeignScan() (if any) in
cases where we would only reset the next_tuple counter in that function,
contradicting the assumption that there should be no pending
asynchronous requests that have been made for async-capable subplans for
the parent Append node after ReScan. This led to an assert failure in
an assert-enabled build. I think this would also lead to mis-rewinding
the cursor in that function in the case where we have already fetched
one batch for the ForeignScan node and the asynchronous request has been
made for the second batch, because even in that case we would just reset
the counter when called from that function, so we would fail to execute
MOVE BACKWARD ALL.
To fix, modify that function to process the asynchronous request before
restarting the scan.
While at it, add a comment to a function to match other places.
Per bug #17344 from Alexander Lakhin. Back-patch to v14 where the
aforesaid commit came in.
Patch by me. Test case by Alexander Lakhin, adjusted by me. Reviewed
and tested by Alexander Lakhin and Dmitry Dolgov.
Discussion: https://postgr.es/m/17344-226b78b00de73a7e@postgresql.org
For authentication method cert, clientcert=verify-full is implied. But
the pg_hba_file_rules entry would incorrectly show clientcert=verify-ca.
Per bug #17354
Reported-By: Feike Steenbergen
Reviewed-By: Jonathan Katz
Backpatch-through: 12
With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays largely the same, although we have to
rely on INCLUDEPY instead of the deprecated get_python_inc function.
Note that sysconfig exists since Python 2.7, so this moves the minimum
required version up from Python 2.6. Also, sysconfig didn't exist in
Python 3.1, so the minimum 3.x version is now 3.2.
We should consider back-patching this if it gives no further trouble,
as the no-longer-supported versions are old enough to probably not
be interesting to anyone.
Peter Eisentraut, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/c74add3c-09c4-a9dd-1a03-a846e5b2fc52@enterprisedb.com
Commit 0ad8032910 failed to update
the pg_basebackup documentation to mention that "client-" or
"server-" can now be prepended to the compression method name. Fix
it there, and also in the --help output that you get from running
the binary.
Also in the documentation, there's an old issue that the arguments to
--checkpoint shouldn't be marked as parameters, because "fast" and
"spread" are literal strings. Fix that too.
Dagfinn Ilmari Mannsåker, partly as per a report from
Shinoda Noriyoshi.
Discussion: http://postgr.es/m/PH7PR84MB1885C1CF433057807551172BEE5F9@PH7PR84MB1885.NAMPRD84.PROD.OUTLOOK.COM
8edd0e794 added some code to remove Append and MergeAppend nodes when they
contained a single child node. As it turned out, this was unsafe to do
when the Append/MergeAppend was parallel_aware and the child node was not.
Removing the Append/MergeAppend, in this case, could lead to the child plan
being called multiple times by parallel workers when it was unsafe to do
so.
Here we fix this by just not removing the Append/MergeAppend when the
parallel_aware flag of the parent and child node don't match.
Reported-by: Yura Sokolov
Bug: #17335
Discussion: https://postgr.es/m/b59605fecb20ba9ea94e70ab60098c237c870628.camel%40postgrespro.ru
Backpatch-through: 12, where 8edd0e794 was first introduced
WAL replay would cause a hard crash if the timeline expected by a
XLOG_END_OF_RECOVERY, a XLOG_CHECKPOINT_ONLINE, or a
XLOG_CHECKPOINT_SHUTDOWN record is not the same as the timeline being
replayed, using the same error message for all three of them. This
commit changes those error messages to use different wordings, adapted
to each record type, which is useful when it comes to the debugging of
an issue in this area.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Robert Haas
Discussion: https://postgr.es/m/CAAJ_b97i1ZerYC_xW6o_AiDSW5n+sGi8k91Yc8KS8bKWKxjqwQ@mail.gmail.com
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
In logical replication mode, a WalSender is supposed to be able
to execute any regular SQL command, as well as the special
replication commands. Poor design of the replication-command
parser caused it to fail in various cases, notably:
* semicolons embedded in a command, or multiple SQL commands
sent in a single message;
* dollar-quoted literals containing odd numbers of single
or double quote marks;
* commands starting with a comment.
The basic problem here is that we're trying to run repl_scanner.l
across the entire input string even when it's not a replication
command. Since repl_scanner.l does not understand all of the
token types known to the core lexer, this is doomed to have
failure modes.
We certainly don't want to make repl_scanner.l as big as scan.l,
so instead rejigger stuff so that we only lex the first token of
a non-replication command. That will usually look like an IDENT
to repl_scanner.l, though a comment would end up getting reported
as a '-' or '/' single-character token. If the token is a replication
command keyword, we push it back and proceed normally with repl_gram.y
parsing. Otherwise, we can drop out of exec_replication_command()
without examining the rest of the string.
(It's still theoretically possible for repl_scanner.l to fail on
the first token; but that could only happen if it's an unterminated
single- or double-quoted string, in which case you'd have gotten
largely the same error from the core lexer too.)
In this way, repl_gram.y isn't involved at all in handling general
SQL commands, so we can get rid of the SQLCmd node type. (In
the back branches, we can't remove it because renumbering enum
NodeTag would be an ABI break; so just leave it sit there unused.)
I failed to resist the temptation to clean up some other sloppy
coding in repl_scanner.l while at it. The only externally-visible
behavior change from that is it now accepts \r and \f as whitespace,
same as the core lexer.
Per bug #17379 from Greg Rychlewski. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17379-6a5c6cfb3f1f5e77@postgresql.org
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4b.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
Without this, we get odd behavior when the previous cycle of
lexing exited in a non-default exclusive state. Every other
copy of this code is aware that it has to do BEGIN(INITIAL),
but repl_scanner.l did not get that memo.
The real-world impact of this is probably limited, since most
replication clients would abandon their connection after getting
a syntax error. Still, it's a bug.
This mistake is old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1874781.1643035952@sss.pgh.pa.us
We're still (see e0e567a106, e0e567a106) working on replacing use of the
deprecated distutils. This commit just makes configure print out the results
of different ways of determining the include path. Hopefully this will help us
to find a way to transition away from distutils without turning the buildfarm
red for prolonged amounts of time.
Discussion: https://postgr.es/m/20220124025301.qu36x44w6m67cnap@alap3.anarazel.de
Commit 6df7a9698 wrote appendPQExpBuffer where it should have
written printfPQExpBuffer. This resulted in re-issuing the
previous query along with the desired one, which very accidentally
had no negative consequences except for some wasted cycles.
Back-patch to v14 where that came in.
Discussion: https://postgr.es/m/1714711.1642962663@sss.pgh.pa.us
Commit 5c649fe15 introduced a memory leak into pg_basebackup's
parse_compress_options. (I simplified nearby code while at it.)
Commit 9a974cbcb introduced a memory leak into pg_dump's
binary_upgrade_set_pg_class_oids.
Coverity also complained about a call of SnapBuildProcessChange that
ignored the result, unlike every other call of that function. This
is evidently intentional, so add a (void) cast to indicate that.
(It's also old, dating to b89e15105; I suppose the reason it showed
up now is 7a5f6b474's recent rearrangement of nearby code.)
In the normal configuration where GEQO_DEBUG isn't defined,
recent clang versions have started to complain that geqo_main.c
accumulates the edge_failures count but never does anything
with it. As a minimal back-patchable fix, insert a void cast
to silence this warning. (I'd speculated about ripping out the
GEQO_DEBUG logic altogether, but I don't think we'd wish to
back-patch that.)
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
an annoying compiler warning but changes no behavior. Hence,
back-patch all the way to 9.2.
Discussion: https://postgr.es/m/CA+hUKGLTSZQwES8VNPmWO9AO0wSeLt36OCPDAZTccT1h7Q7kTQ@mail.gmail.com
In sort_inner_and_outer we iterate a list of PathKey elements, but the
variable is declared as (List *). This mistake is benign, because we
only pass the pointer to lcons() and never dereference it.
This exists since ~2004, but it's confusing. So fix and backpatch to all
supported branches.
Backpatch-through: 10
Discussion: https://postgr.es/m/bf3a6ea1-a7d8-7211-0669-189d5c169374%40enterprisedb.com
The syscache lookup may return NULL even for valid OID, for example due
to a concurrent DROP STATISTICS, so a HeapTupleIsValid is necessary.
Without it, it may fail with a segfault.
Reported by Alexander Lakhin, patch by me. Backpatch to 13, where ALTER
STATISTICS ... SET STATISTICS was introduced.
Backpatch-through: 13
Discussion: https://postgr.es/m/17372-bf3b6e947e35ae77%40postgresql.org
Putting "inline" on a function that's not used anywhere in its
own file is useless unless the linker is doing global optimization,
a method we don't generally enable. Moreover, it draws warnings
from some buildfarm members (curculio at least).
Looks like this was sloppiness in cc8b25712, which moved the
function from somewhere else where the inline marker was
more appropriate.
These functions aren't exact inverses, but they're closely related;
yet we document them in two different sections. Add cross-ref
<link>s to improve that situation.
While here, move the strpos and substr entries to re-alphabetize
Table 9.10. Also, drop an ancient compatibility note about
string_to_array, which wasn't even on the right page, so probably
few people ever saw it.
Discussion: https://postgr.es/m/164287017550.704.5840412183184961677@wrigleys.postgresql.org
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
In libpq and ecpglib, multiple threads can concurrently enter the
initialization logic for message localization. Since we set the
its-done flag before actually doing the work, it'd be possible
for some threads to reach gettext() before anyone has called
bindtextdomain(). Barring bugs in libintl itself, this would not
result in anything worse than failure to localize some early
messages. Nonetheless, it's a bug, and an easy one to fix.
Noted while investigating bug #17299 from Clemens Zeidler
(much thanks to Liam Bowen for followup investigation on that).
It currently appears that that actually *is* a bug in libintl itself,
but that doesn't let us off the hook for this bit.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/17299-7270741958c0b1ab@postgresql.org
Discussion: https://postgr.es/m/CAE7q7Eit4Eq2=bxce=Fm8HAStECjaXUE=WBQc-sDDcgJQ7s7eg@mail.gmail.com
While individual logical rewrite files were synced to disk, the directory was
not. On some filesystems that could lead to loosing directory entries after a
crash.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/867F2E29-2782-4869-970E-B984C6D35A8F@amazon.com
Backpatch: 10-
Commit 27e1f1456 resets the per-connection states of connections used to
scan foreign tables asynchronously during abort cleanup at main
transaction end, but it failed to do so during subabort cleanup at
subtransaction end, leading to a segmentation fault when re-executing an
asynchronous-foreign-table-scan query in a transaction that was
cancelled in a subtransaction of it.
Fix by modifying pgfdw_abort_cleanup() to reset the per-connection state
of a given connection also when called for subabort cleanup. Also,
modify that function to do the reset in both the abort-cleanup and
subabort-cleanup cases if necessary, to save cycles, and improve a
comment on it a little bit.
Back-patch to v14 where the aforesaid commit came in.
Reviewed by Alexander Pyhalov
Discussion: https://postgr.es/m/CAPmGK14cCV-JA7kNsyt2EUTKvZ4xkr2LNRthi1U1C3cqfGppAw@mail.gmail.com
The logic in charge of writing commit timestamps (enabled with
track_commit_timestamp) for subtransactions had a one-bug bug,
where it would be possible that commit timestamps go missing for the
last subtransaction committed.
While on it, simplify a bit the iteration logic in the loop writing the
commit timestamps, as per suggestions from Kyotaro Horiguchi and Tom
Lane, so as some variable initializations are not part of the loop
itself.
Issue introduced in 73c986a.
Analyzed-by: Alex Kingsborough
Author: Alex Kingsborough, Kyotaro Horiguchi
Discussion: https://postgr.es/m/73A66172-4050-4F2A-B7F1-13508EDA2144@amazon.com
Backpatch-through: 10
The option --compress is extended to accept a compression method and an
optional compression level, as of the grammar METHOD[:LEVEL]. The
methods currently support are "none" and "gzip", for client-side
compression. Any of those methods use only an integer value for the
compression level, but any method implemented in the future could use
more specific keywords if necessary.
This commit keeps the logic backward-compatible. Hence, the following
compatibility rules apply for the new format of the option --compress:
* -z/--gzip is a synonym of --compress=gzip.
* --compress=NUM implies:
** --compress=none if NUM = 0.
** --compress=gzip:NUM if NUM > 0.
Note that there are also plans to extend more this grammar with
server-side compression.
Reviewed-by: Robert Haas, Magnus Hagander, Álvaro Herrera, David
G. Johnston, Georgios Kokolatos
Discussion: https://postgr.es/m/Yb3GEgWwcu4wZDuA@paquier.xyz
Commits 6c4a8903b et al. had a couple of deficiencies:
* The logic I added to Cluster::start to see if a PID file is present
could be fooled by a stale PID file left over from a previous
postmaster. To fix, if we're not sure whether we expect to find a
running postmaster or not, validate the PID using "kill 0".
* 017_shm.pl has a loop in which it just issues repeated Cluster::start
calls; this will fail if some invocation fails but leaves self->_pid
set. Per buildfarm results, the above fix is not enough to make this
safe: we might have "validated" a PID for a postmaster that exits
immediately after we look. Hence, match each failed start call with
a stop call that will get us back to the self->_pid == undef state.
Add a fail_ok option to Cluster::stop to make this work.
Discussion: https://postgr.es/m/CA+hUKGKV6fOHvfiPt8=dOKzvswjAyLoFoJF1iQXMNpi7+hD1JQ@mail.gmail.com
pg_basebackup now has a --target=TARGET[:DETAIL] option. If specfied,
it is sent to the server as the value of the TARGET option to the
BASE_BACKUP command. If DETAIL is included, it is sent as the value of
the new TARGET_DETAIL option to the BASE_BACKUP command. If the
target is anything other than 'client', pg_basebackup assumes that it
will now be the server's job to write the backup in a location somehow
defined by the target, and that it therefore needs to write nothing
locally. However, the server will still send messages to the client
for progress reporting purposes.
On the server side, we now support two additional types of backup
targets. There is a 'blackhole' target, which just throws away the
backup data without doing anything at all with it. Naturally, this
should only be used for testing and debugging purposes, since you will
not actually have a backup when it finishes running. More usefully,
there is also a 'server' target, so you can now use something like
'pg_basebackup -Xnone -t server:/SOME/PATH' to write a backup to some
location on the server. We can extend this to more types of targets
in the future, and might even want to create an extensibility
mechanism for adding new target types.
Since WAL fetching is handled with separate client-side logic, it's
not part of this mechanism; thus, backups with non-default targets
must use -Xnone or -Xfetch.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
Since the test requires reproducible behavior from VACUUM, and since
DISABLE_PAGE_SKIPPING doesn't actually disable all forms of page
skipping, let's use a temporary table to avoid contention.
Back-patch to 12, like commit 3414099c.
Discussion: https://postgr.es/m/20220120052404.sonrhq3f3qgplpzj%40alap3.anarazel.de
Previously, callers of pg_newlocale_from_collation() did not call it
if the collation was DEFAULT_COLLATION_OID and instead proceeded with
a pg_locale_t of 0. Instead, now we call it anyway and have it return
0 if the default collation was passed. It already did this, so we
just have to adjust the callers. This simplifies all the call sites
and also makes future enhancements easier.
After discussion and testing, the previous comment in pg_locale.c
about avoiding this for performance reasons may have been mistaken
since it was testing a very different patch version way back when.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/ed3baa81-7fac-7788-cc12-41e3f7917e34@enterprisedb.com
Its results vary depending on the IntervalStyle GUC, so it cannot
be considered immutable.
This is an extremely ancient bug. AFAICT it was a sloppy mistake
in 6f58115dd, which marked it "cacheable" alongside marking several
other interval functions that way. At the time, interval_out()
depended on DateStyle not IntervalStyle, but it was still wrong.
Back-patching this change doesn't look very practical, so I won't.
Aside from the usual difficulties of getting catalog changes
applied to existing databases, people might have indexes,
generated columns, etc that depend on interval-to-text casts
being considered immutable. (This'd not really give them any
problem as long as they never change IntervalStyle.) They
wouldn't appreciate us breaking such usage in minor releases.
Per bug #17371 from Marcus Gartner.
Discussion: https://postgr.es/m/17371-8f57e6e9ca5e35bf@postgresql.org
"pg_ctl start" might start a new postmaster and then return failure
anyway, for example if PGCTLTIMEOUT is exceeded. If there is a
postmaster there, it's still incumbent on us to shut it down at
script end, so check for the PID file even though we are about
to fail.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/647439.1642622744@sss.pgh.pa.us
Robert Haas
Tomas Vondra
Peter Eisentraut
Andrew Dunstan
Etsuro Fujita
Noah Misch
Magnus Hagander
Tom Lane
David Rowley
Michael Paquier
Andres Freund
Thomas Munro
Jeff Davis