SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
Allow support only for freezing tuples by explicit
command. Previous coding mistakenly extended
slightly beyond what was agreed as correct on -hackers.
So essentially a partial revoke of earlier work,
leaving just the COPY FREEZE command.
When a relfilenode is created in this subtransaction or
a committed child transaction and it cannot otherwise
be seen by our own process, mark tuples committed ahead
of transaction commit for all COPY commands in same
transaction. If FREEZE specified on COPY
and pre-conditions met then rows will also be frozen.
Both options designed to avoid revisiting rows after commit,
increasing performance of subsequent commands after
data load and upgrade. pg_restore changes later.
Simon Riggs, review comments from Heikki Linnakangas, Noah Misch and design
input from Tom Lane, Robert Haas and Kevin Grittner
This prevents surprising behavior when a FOR EACH ROW trigger
BEFORE UPDATE or BEFORE DELETE directly or indirectly updates or
deletes the the old row. Prior to this patch the requested action
on the row could be silently ignored while all triggered actions
based on the occurence of the requested action could be committed.
One example of how this could happen is if the BEFORE DELETE
trigger for a "parent" row deleted "children" which had trigger
functions to update summary or status data on the parent.
This also prevents similar surprising problems if the query has a
volatile function which updates a target row while it is already
being updated.
There are related issues present in FOR UPDATE cursors and READ
COMMITTED queries which are not handled by this patch. These
issues need further evalution to determine what change, if any, is
needed.
Where the new error messages are generated, in most cases the best
fix will be to move code from the BEFORE trigger to an AFTER
trigger. Where this is not feasible, the trigger can avoid the
error by re-issuing the triggering statement and returning NULL.
Documentation changes will be submitted in a separate patch.
Kevin Grittner and Tom Lane with input from Florian Pflug and
Robert Haas, based on problems encountered during conversion of
Wisconsin Circuit Court trigger logic to plpgsql triggers.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
The heapam XLog functions are used by other modules, not all of which
are interested in the rest of the heapam API. With this, we let them
get just the XLog stuff in which they are interested and not pollute
them with unrelated includes.
Also, since heapam.h no longer requires xlog.h, many files that do
include heapam.h no longer get xlog.h automatically, including a few
headers. This is useful because heapam.h is getting pulled in by
execnodes.h, which is in turn included by a lot of files.
When I implemented the ginbuildempty() function as part of
implementing unlogged tables, I falsified the note in the header
comment for log_newpage. Although we could fix that up by changing
the comment, it seems cleaner to add a new function which is
specifically intended to handle this case. So do that.
The alternative of disallowing index-only scans in HS operation was
discussed, but the consensus was that it was better to treat marking
a page all-visible as a recovery conflict for snapshots that could still
fail to see XIDs on that page. We may in the future try to soften this,
so that we simply force index scans to do heap fetches in cases where
this may be an issue, rather than throwing a hard conflict.
It used to be case that lazy vacuum could call this function with only
a shared lock on the buffer, but neither lazy vacuum nor any other
code path does that any more. Simplify the code accordingly and clean
up some related, obsolete comments.
This greatly reduces the WAL volume, especially when the table is narrow.
The overhead of locking the heap page is also reduced. Reduced WAL traffic
also makes it scale a lot better, if you run multiple COPY processes at
the same time.
In a regular VACUUM, it's OK to skip pages for which a cleanup lock
isn't immediately available; the next VACUUM will deal with them. If
we're scanning the entire relation to advance relfrozenxid, we might
need to wait, but only if there are tuples on the page that actually
require freezing. These changes should greatly reduce the incidence
of of vacuum processes getting "stuck".
Simon Riggs and Robert Haas
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Since the names try_relation_openrv() and try_heap_openrv() don't seem
quite appropriate, rename the functions to relation_openrv_extended()
and heap_openrv_extended(). This is also more general, if we have a
future need for additional parameters that are of interest to only a
few callers.
This is infrastructure for a forthcoming patch to allow
get_object_address() to take a missing_ok argument as well.
Patch by me, review by Noah Misch.
It's been like this since HOT was originally introduced, but the logic
is complex enough that this is a recipe for bugs, as we've already
found out with SSI. So refactor heap_hot_search_buffer() so that it
can satisfy the needs of index_getnext(), and make index_getnext() use
that rather than duplicating the logic.
This change was originally proposed by Heikki Linnakangas as part of a
larger refactoring oriented towards allowing index-only scans. I
extracted and adjusted this part, since it seems to have independent
merit. Review by Jeff Davis.
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
vacuum_log_cleanup_info() now generates log records with a valid
latestRemovedXid set in all cases. Also be careful not to zero the
value when we do a round of vacuuming part-way through lazy_scan_heap().
Incidentally, this reduces frequency of conflicts in Hot Standby.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
"all tuples visible" flag in heap page headers. The flag update *must*
be applied before calling XLogInsert, but heap_update and the tuple
moving routines in VACUUM FULL were ignoring this rule. A crash and
replay could therefore leave the flag incorrectly set, causing rows
to appear visible in seqscans when they should not be. This might explain
recent reports of data corruption from Jeff Ross and others.
In passing, do a bit of editorialization on comments in visibilitymap.c.
errors when tables are concurrently dropped. To do this we must take lock
on each relation before we check its privileges. The old code was trying
to do that the other way around, which is a bit pointless when there are lots
of other commands that lock relations before checking privileges. I did keep
it checking each relation's privilege before locking the next relation, which
is a detail that ALTER TABLE isn't too picky about.
(but not locked, as that would risk deadlocks). Also, make it work in a small
ring of buffers to avoid having bulk inserts trash the whole buffer arena.
Robert Haas, after an idea of Simon Riggs'.
of referencing a WITH item that's not yet in scope according to the SQL
spec's semantics. This seems to be an easy error to make, and the bare
"relation doesn't exist" message doesn't lead one's mind in the correct
direction to fix it.
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
it accumulates the set of changes to be made and then applies them. It had
to accumulate the set of changes anyway to prepare a WAL record for the
pruning action, so this isn't an enormous change; the only new complexity is
to not doubly mark tuples that are visited twice in the scan. The main
advantage is that we can substantially reduce the scope of the critical
section in which the changes are applied, thus avoiding PANIC in foreseeable
cases like running out of memory in inval.c. A nice secondary advantage is
that it is now far clearer that WAL replay will actually do the same thing
that the original pruning did.
This commit doesn't do anything about the open problem that
CacheInvalidateHeapTuple doesn't have the right semantics for a CTID change
caused by collapsing out a redirect pointer. But whatever we do about that,
it'll be a good idea to not do it inside a critical section.
its second pass over the table. It has to start at block zero, else the
"merge join" logic for detecting which TIDs are already in the index
doesn't work. Hence, extend heapam.c's API so that callers can enable or
disable syncscan. (I put in an option to disable buffer access strategy,
too, just in case somebody needs it.) Per report from Hannes Dorbath.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
pseudo HeapScanDesc created for a bitmap heap scan. This avoids some useless
overhead during a bitmap scan startup, in particular invoking the syncscan
code. (We might someday want to do that, but right now it's merely useless
contention for shared memory, to say nothing of possibly pushing useful
entries out of syncscan's small LRU list.) This also allows elimination of
ugly pgstat_discount_heap_scan() kluge.
Bruce Momjian
Robert Haas
Alvaro Herrera
Simon Riggs
Kevin Grittner
Heikki Linnakangas
Tom Lane
Magnus Hagander