An empty HBA file is surely an error, since it means there is no way to
connect to the server. We've not heard identifiable reports of people
actually doing that, but this will also close off the case Thom Brown just
complained of, namely pointing hba_file at a directory. (On at least some
platforms with some directories, it will read as an empty file.)
Perhaps this should be back-patched, but given the lack of previous
complaints, I won't add extra work for the translators.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
This disables an entirely unnecessary "sanity check" that causes failures
in nonblocking mode, because OpenSSL complains if we move or compact the
write buffer. The only actual requirement is that we not modify pending
data once we've attempted to send it, which we don't. Per testing and
research by Martin Pihlak, though this fix is a lot simpler than his patch.
I put the same change into the backend, although it's less clear whether
it's necessary there. We do use nonblock mode in some situations in
streaming replication, so seems best to keep the same behavior in the
backend as in libpq.
Back-patch to all supported releases.
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
This fixes SSPI login failures showing "The function
requested is not supported", often showing up when connecting
to localhost. The reason was not properly updating the SSPI
handle when multiple roundtrips were required to complete the
authentication sequence.
Report and analysis by Ahmed Shinwari, patch by Magnus Hagander
The previous coding was ugly, as it marked special tokens as such in the
wrong stage, relying on workarounds to figure out if they had been
quoted in the original or not. This made it impossible to have specific
keywords be recognized as such only in certain positions in HBA lines,
for example. Fix by restructuring the parser code so that it remembers
whether tokens were quoted or not. This eliminates widespread knowledge
of possible known keywords for all fields.
Also improve memory management in this area, to use memory contexts that
are reset as a whole instead of using retail pfrees; this removes a
whole lotta crufty (and probably slow) code.
Instead of calling strlen() three times in next_field_expand on the
returned token to find out whether there was a comma (and strip it),
pass back the info directly from the callee, which is simpler.
In passing, update historical artifacts in hba.c API.
Authors: Brendan Jurd, Alvaro Herrera
Reviewed by Pavel Stehule
This unifies a bunch of ugly #ifdef's in one place. Per discussion,
we only need this where HAVE_UNIX_SOCKETS, so no need to cover Windows.
Marko Kreen, some adjustment by Tom Lane
It turns out the reason we hadn't found out about the portability issues
with our credential-control-message code is that almost no modern platforms
use that code at all; the ones that used to need it now offer getpeereid(),
which we choose first. The last holdout was NetBSD, and they added
getpeereid() as of 5.0. So far as I can tell, the only live platform on
which that code was being exercised was Debian/kFreeBSD, ie, FreeBSD kernel
with Linux userland --- since glibc doesn't provide getpeereid(), we fell
back to the control message code. However, the FreeBSD kernel provides a
LOCAL_PEERCRED socket parameter that's functionally equivalent to Linux's
SO_PEERCRED. That is both much simpler to use than control messages, and
superior because it doesn't require receiving a message from the other end
at just the right time.
Therefore, add code to use LOCAL_PEERCRED when necessary, and rip out all
the credential-control-message code in the backend. (libpq still has such
code so that it can still talk to pre-9.1 servers ... but eventually we can
get rid of it there too.) Clean up related autoconf probes, too.
This means that libpq's requirepeer parameter now works on exactly the same
platforms where the backend supports peer authentication, so adjust the
documentation accordingly.
Even though our existing code for handling credentials control messages has
been basically unchanged since 2001, it was fundamentally wrong: it did not
ensure proper alignment of the supplied buffer, and it was calculating
buffer sizes and message sizes incorrectly. This led to failures on
platforms where alignment padding is relevant, for instance FreeBSD on
64-bit platforms, as seen in a recent Debian bug report passed on by
Martin Pitt (http://bugs.debian.org//cgi-bin/bugreport.cgi?bug=612888).
Rewrite to do the message-whacking using the macros specified in RFC 2292,
following a suggestion from Theo de Raadt in that thread. Tested by me
on Debian/kFreeBSD-amd64; since OpenBSD and NetBSD document the identical
CMSG API, it should work there too.
Back-patch to all supported branches.
Since we now include a sample line for replication on local
connections in pg_hba.conf, don't include it where local
connections aren't available (such as on win32).
Also make sure we use authmethodlocal and not authmethod on
the sample line.
In a couple of places we said "not supported on this platform" for cases
that aren't really platform-specific, but could depend on configuration
options such as --with-openssl. Use "not supported by this build" instead,
as that doesn't convey the impression that you can't fix it without moving
to another OS; that's also more consistent with the wording used for an
identical error case in guc.c.
No back-patch, as the clarity gain is small enough to not be worth
burdening translators with back-branch changes.
Most commenters agreed that this is more friendly than silently failing
to match the line during actual connection attempts. Also, this will
prevent corner cases that might arise when trying to handle such a line
when the SSL code isn't turned on. An example is that specifying
clientcert=1 in such a line would formerly result in a completely
misleading complaint that root.crt wasn't present, as seen in a recent
report from Marc-Andre Laverdiere. While we could have instead fixed
that specific behavior, it seems likely that we'd have a continuing stream
of such bizarre behaviors if we keep on allowing hostssl lines when SSL is
disabled.
Back-patch to 8.4, where clientcert was introduced. Earlier versions don't
have this specific issue, and the code is enough different to make this
patch not applicable without more work than it seems worth.
than on other platforms, and only IPv6 addresses are returned. Because of
those two issues, fall back to ioctl(SIOCGIFCONF) on HP/UX, so that it at
least compiles and finds IPv4 addresses. This function is currently only
used for interpreting samehost/samenet in pg_hba.conf, which isn't that
critical.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
This involves getting the character classification and case-folding
functions in the regex library to use the collations infrastructure.
Most of this work had been done already in connection with the upper/lower
and LIKE logic, so it was a simple matter of transposition.
While at it, split out these functions into a separate source file
regc_pg_locale.c, so that they can be correctly labeled with the Postgres
project's license rather than the Scriptics license. These functions are
100% Postgres-written code whereas what remains in regc_locale.c is still
mostly not ours, so lumping them both under the same copyright notice was
getting more and more misleading.
than replication_timeout (a new GUC) milliseconds. The TCP timeout is often
too long, you want the master to notice a dead connection much sooner.
People complained about that in 9.0 too, but with synchronous replication
it's even more important to notice dead connections promptly.
Fujii Masao and Heikki Linnakangas
The local variable "sock" can be unused depending on compilation flags.
But there seems no particular need for it, since the kernel calls can
just as easily say port->sock instead.
This removes an overloading of two authentication options where
one is very secure (peer) and one is often insecure (ident). Peer
is also the name used in libpq from 9.1 to specify the same type
of authentication.
Also make initdb select peer for local connections when ident is
chosen, and ident for TCP connections when peer is chosen.
ident keyword in pg_hba.conf is still accepted and maps to peer
authentication.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
Corrupt RADIUS responses were treated as errors and not ignored
(which the RFC2865 states they should be). This meant that a
user with unfiltered access to the network of the PostgreSQL
or RADIUS server could send a spoofed RADIUS response
to the PostgreSQL server causing it to reject a valid login,
provided the attacker could also guess (or brute-force) the
correct port number.
Fix is to simply retry the receive in a loop until the timeout
has expired or a valid (signed by the correct RADIUS server)
packet arrives.
Reported by Alan DeKok in bug #5687.
which is perhaps not a terribly good spot for it but there doesn't seem to be
a better place. Also add a source-code comment pointing out a couple reasons
for having a separate lock file. Per suggestion from Greg Smith.
unqualified names.
- Add a missing_ok parameter to get_tablespace_oid.
- Avoid duplicating get_tablespace_od guts in objectNamesToOids.
- Add a missing_ok parameter to get_database_oid.
- Replace get_roleid and get_role_checked with get_role_oid.
- Add get_namespace_oid, get_language_oid, get_am_oid.
- Refactor existing code to use new interfaces.
Thanks to KaiGai Kohei for the review.
requests for client certs. This lets a client with a keystore select the
appropriate client certificate to send. In particular, this is necessary
to get Java clients to work in all but the most trivial configurations.
Per discussion of bug #5468.
Craig Ringer
with database = replication. The previous coding would allow them to match
ordinary records too, but that seems like a recipe for security breaches.
Improve the messages associated with no-such-pg_hba.conf entry to report
replication connections as such, since that's now a critical aspect of
whether the connection matches. Make some cursory improvements in the related
documentation, too.
unless (1) the @ isn't quoted and (2) the filename isn't empty. This guards
against unexpectedly treating usernames or other strings in "flat files"
as inclusion requests, as seen in a recent trouble report from Ed L.
The empty-filename case would be guaranteed to misbehave anyway, because our
subsequent path-munging behavior results in trying to read the directory
containing the current input file.
I think this might finally explain the report at
http://archives.postgresql.org/pgsql-bugs/2004-05/msg00132.php
of a crash after printing "authentication file token too long, skipping",
since I was able to duplicate that message (though not a crash) on a
platform where stdio doesn't refuse to read directories. We never got
far in investigating that problem, but now I'm suspicious that the trigger
condition was an @ in the flat password file.
Back-patch to all active branches since the problem can be demonstrated in all
branches except HEAD. The test case, creating a user named "@", doesn't cause
a problem in HEAD since we got rid of the flat password file. Nonetheless it
seems like a good idea to not consider quoted @ as a file inclusion spec,
so I changed HEAD too.
set ferror() but never set feof(). This is known to be the case for recent
glibc when trying to read a directory as a file, and might be true for other
platforms/cases too. Per report from Ed L. (There is more that we ought to
do about his report, but this is one easily identifiable issue.)
how often we do SSL session key renegotiation. Can be set to
0 to disable renegotiation completely, which is required if
a broken SSL library is used (broken patches to CVE-2009-3555
a known cause) or when using a client library that can't do
renegotiation.
and use this in pq_getbyte_if_available.
It's only a limited implementation which swithes the whole emulation layer
no non-blocking mode, but that's enough as long as non-blocking is only
used during a short period of time, and only one socket is accessed during
this time.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
These files have apparently been edited over the years by a dozen people
with as many different editor settings, which made the alignment of the
paragraphs quite inconsistent and ugly. I made a pass of M-q with Emacs
to straighten it out.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
This silences some warnings on Win64. Not using the proper SOCKET datatype
was actually wrong on Win32 as well, but didn't cause any warnings there.
Also create define PGINVALID_SOCKET to indicate an invalid/non-existing
socket, instead of using a hardcoded -1 value.
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
at least in some Windows versions, these functions are capable of returning
a failure indication without setting errno. That puts us into an infinite
loop if the previous value happened to be EINTR. Per report from Brendan
Hill.
Back-patch to 8.2. We could take it further back, but since this is only
known to be an issue on Windows and we don't support Windows before 8.2,
it does not seem worth the trouble.
does a search for the user in the directory first, and then binds with
the DN found for this user.
This allows for LDAP logins in scenarios where the DN of the user cannot
be determined simply by prefix and suffix, such as the case where different
users are located in different containers.
The old way of authentication can be significantly faster, so it's kept
as an option.
Robert Fleming and Magnus Hagander
attacks where an attacker would put <attack>\0<propername> in the field and
trick the validation code that the certificate was for <attack>.
This is a very low risk attack since it reuqires the attacker to trick the
CA into issuing a certificate with an incorrect field, and the common
PostgreSQL deployments are with private CAs, and not external ones. Also,
default mode in 8.4 does not do any name validation, and is thus also not
vulnerable - but the higher security modes are.
Backpatch all the way. Even though versions 8.3.x and before didn't have
certificate name validation support, they still exposed this field for
the user to perform the validation in the application code, and there
is no way to detect this problem through that API.
Security: CVE-2009-4034
pam_message array contains exactly one PAM_PROMPT_ECHO_OFF message.
Instead, deal with however many messages there are, and don't throw error
for PAM_ERROR_MSG and PAM_TEXT_INFO messages. This logic is borrowed from
openssh 5.2p1, which hopefully has seen more real-world PAM usage than we
have. Per bug #5121 from Ryan Douglas, which turned out to be caused by
the conv_proc being called with zero messages. Apparently that is normal
behavior given the combination of Linux pam_krb5 with MS Active Directory
as the domain controller.
Patch all the way back, since this code has been essentially untouched
since 7.4. (Surprising we've not heard complaints before.)
and SSPI athentication methods. While the old 2000 byte limit was more than
enough for Unix Kerberos implementations, tickets issued by Windows Domain
Controllers can be much larger.
Ian Turner
large number of SIGHUP cycles, these would have run the postmaster out
of memory. Noted while testing memory-leak scenario in postgresql.conf
configuration-change-printing patch.
if salt_len == 0. This seems to be mostly academic, since nearly all calling
code paths guarantee nonempty salt; the only case that doesn't is
PQencryptPassword where the caller could mistakenly pass an empty username.
So, fix it but don't bother backpatching. Per ljb.
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
(That flat file is now completely useless, but removal will come later.)
To do this, postpone client authentication into the startup transaction
that's run by InitPostgres. We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before. The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle. (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)
A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.
Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication. This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead. However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.
encoding conversion of any elog/ereport message being sent to the frontend.
This generalizes a patch that I put in last October, which suppressed
translation of only specific messages known to be associated with recursive
can't-translate-the-message behavior. As shown in bug #4680, we need a more
general answer in order to have some hope of coping with broken encoding
conversion setups. This approach seems a good deal less klugy anyway.
Patch in all supported branches.
to the documented API value. The previous code got it right as
it's implemented, but accepted too much/too little compared to
the API documentation.
Per comment from Zdenek Kotala.
to pass the full username@realm string to the authentication instead of
just the username. This makes it possible to use pg_ident.conf to authenticate
users from multiple realms as different database users.
it's connection. This is required for applications that unload
the libpq library (such as PHP) in which case we'd otherwise
have pointers to these functions when they no longer exist.
This needs a bit more testing before we can consider a backpatch,
so not doing that yet.
In passing, remove unused functions in backend/libpq.
Bruce Momjian and Magnus Hagander, per report and analysis
by Russell Smith.
of copy/paste:d emails. Much of the contents had already been migrated
into the main documentation, some was out of date and some just plain
wrong.
Keep the "protocol-flowchart" which can still be useful.
* make LDAP use this instead of the hacky previous method to specify
the DN to bind as
* make all auth options behave the same when they are not compiled
into the server
* rename "ident maps" to "user name maps", and support them for all
auth methods that provide an external username
This makes a backwards incompatible change in the format of pg_hba.conf
for the ident, PAM and LDAP authentication methods.
each connection. This makes it possible to catch errors in the pg_hba
file when it's being reloaded, instead of silently reloading a broken
file and failing only when a user tries to connect.
This patch also makes the "sameuser" argument to ident authentication
optional.
method is grouped together in a reasonably similar way, keeping the "global
shared functions" together in their own section as well. Makes it a lot easier
to find your way around the code.
key files that are similar to the one for the postmaster's data directory
permissions check. (I chose to standardize on that one since it's the most
heavily used and presumably best-wordsmithed by now.) Also eliminate explicit
tests on file ownership in these places, since the ensuing read attempt must
fail anyway if it's wrong, and there seems no value in issuing the same error
message for distinct problems. (But I left in the explicit ownership test in
postmaster.c, since it had its own error message anyway.) Also be more
specific in the documentation's descriptions of these checks. Per a gripe
from Kevin Hunter.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
issue a helpful error message instead of sending unparsable garbage.
(It is clearly a design error that this doesn't work, but fixing it
is not worth the trouble at this point.) Per discussion.
to validate the realm of the connecting user. By default
it's empty meaning no verification, which is the way
Kerberos authentication has traditionally worked in
PostgreSQL.
against a Unix server, and Windows-specific server-side authentication
using SSPI "negotiate" method (Kerberos or NTLM).
Only builds properly with MSVC for now.
had been taught not to do that ages ago, the SSL code was helpfully bleating
anyway. Resolves some recent reports such as bug #3266; however the
underlying cause of the related bug #2829 is still unclear.
right, there seems precious little reason to have a pile of hand-maintained
endianness definitions in src/include/port/*.h. Get rid of those, and make
the couple of places that used them depend on WORDS_BIGENDIAN instead.
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
o read global SSL configuration file
o add GUC "ssl_ciphers" to control allowed ciphers
o add libpq environment variable PGSSLKEY to control SSL hardware keys
Victor B. Wagner
socket is still read-ready, the code was a tight loop, wasting lots of CPU.
We can't do anything to clear the failure, other than wait, but we should give
other processes more chance to finish and release FDs; so insert a small sleep.
Also, avoid bogus "close(-1)" in this case. Per report from Jim Nasby.
input in the stats collector. Our select() emulation is apparently buggy
for UDP sockets :-(. This should resolve problems with stats collection
(and hence autovacuum) failing under more than minimal load. Diagnosis
and patch by Magnus Hagander.
Patch probably needs to be back-ported to 8.1 and 8.0, but first let's
see if it makes the buildfarm happy...
manually release the LDAP handle via ldap_unbind(). This isn't a
significant problem in practice because an error eventually results
in exiting the process, but we can cleanup correctly without too
much pain.
In passing, fix an error in snprintf() usage: the "size" parameter
to snprintf() is the size of the destination buffer, including space
for the NUL terminator. Also, depending on the value of NAMEDATALEN,
the old coding could have allowed for a buffer overflow.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
sin_port in the returned IP address struct when servname is NULL. This has
been observed to cause failure to bind the stats collection socket, and
could perhaps cause other issues too. Per reports from Brad Nicholson
and Chris Browne.
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
libpq/md5.h, so that there's a clear separation between backend-only
definitions and shared frontend/backend definitions. (Turns out this
is reversing a bad decision from some years ago...) Fix up references
to crypt.h as needed. I looked into moving the code into src/port, but
the headers in src/include/libpq are sufficiently intertwined that it
seems more work than it's worth to do that.
o remove many WIN32_CLIENT_ONLY defines
o add WIN32_ONLY_COMPILER define
o add 3rd argument to open() for portability
o add include/port/win32_msvc directory for
system includes
Magnus Hagander
set to the large object context ("fscxt"), as this is inevitably a source of
transaction-duration memory leaks. Not sure why we'd not noticed it before;
maybe people weren't touching a whole lot of LOs in the same transaction
before the 8.1 pg_dump changes. Per report from Wayne Conrad.
Backpatched as far as 8.1, but the problem doubtless goes all the way back.
I'm disinclined to spend the time to try to verify that the older branches
would still work if patched, seeing that this code was significantly modified
for 8.0 and again for 8.1, and that we don't have any trouble reports before
8.1. (Maybe the leaks were smaller before?)
rather than "return expr;" -- the latter style is used in most of the
tree. I kept the parentheses when they were necessary or useful because
the return expression was complex.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
module. Don't rely on backend palloc semantics; in fact, best to not
use palloc at all, rather than #define'ing it to malloc, because that
just encourages errors of omission. Bug spotted by Volkan YAZICI,
but I went further than he did to fix it.
to call krb5_sname_to_principal() always. Also, use krb_srvname rather
than the hardwired string 'postgres' as the appl_version string in the
krb5_sendauth/recvauth calls, to avoid breaking compatibility with PG
8.0. Magnus Hagander
for int8 and related types. However we might be talking to a client
that has working int64; so pq_getmsgint64 really needs to check the
incoming value and throw an overflow error if we can't represent it
accurately.
to drop connections unceremoniously. Also some other marginal cleanups:
don't query getsockopt() repeatedly if it fails, and avoid having the
apparent definition of struct Port depend on which system headers you
might have included or not. Oliver Jowett and Tom Lane.
delay and limit, both as global GUCs and as table-specific entries in
pg_autovacuum. stats_reset_on_server_start is now OFF by default,
but a reset is forced if we did WAL replay. XID-wrap vacuums do not
ANALYZE, but do FREEZE if it's a template database. Alvaro Herrera
track shared relations in a separate hashtable, so that operations done
from different databases are counted correctly. Add proper support for
anti-XID-wraparound vacuuming, even in databases that are never connected
to and so have no stats entries. Miscellaneous other bug fixes.
Alvaro Herrera, some additional fixes by Tom Lane.
pg_strcasecmp and pg_strncasecmp ... but I see some of the former have
crept back in.
Eternal vigilance is the price of locale independence, apparently.
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
malformed ident map file. This was introduced by the linked list
rewrite in 8.0 -- mea maxima culpa.
Per Coverity static analysis performed by EnterpriseDB.
part of service principal. If not set, any service principal matching
an entry in the keytab can be used.
NEW KERBEROS MATCHING BEHAVIOR FOR 8.1.
Todd Kover
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
postgresql.conf.
---------------------------------------------------------------------------
Here's an updated version of the patch, with the following changes:
1) No longer uses "service name" as "application version". It's instead
hardcoded as "postgres". It could be argued that this part should be
backpatched to 8.0, but it doesn't make a big difference until you can
start changing it with GUC / connection parameters. This change only
affects kerberos 5, not 4.
2) Now downcases kerberos usernames when the client is running on win32.
3) Adds guc option for "krb_caseins_users" to make the server ignore
case mismatch which is required by some KDCs such as Active Directory.
Off by default, per discussion with Tom. This change only affects
kerberos 5, not 4.
4) Updated so it doesn't conflict with the rendevouz/bonjour patch
already in ;-)
Magnus Hagander
to just around the bare recv() call that gets a command from the client.
The former placement in PostgresMain was unsafe because the intermediate
processing layers (especially SSL) use facilities such as malloc that are
not necessarily re-entrant. Per report from counterstorm.com.
in favor of looking at the flat file copy of pg_database during backend
startup. This should finally eliminate the various corner cases in which
backend startup fails unexpectedly because it isn't able to distinguish
live and dead tuples in pg_database. Simplify locking on pg_database
to be similar to the rules used with pg_shadow and pg_group, and eliminate
FlushRelationBuffers operations that were used only to reduce the odds
of failure of GetRawDatabaseInfo.
initdb forced due to addition of a trigger to pg_database.
implement the md5() SQL-level function). The old code did the
following:
1. de-toast the datum
2. convert it to a cstring via textout()
3. get the length of the cstring via strlen()
Since we are treating the datum context as a blob of binary data,
the latter two steps are unnecessary. Once the data has been
detoasted, we can just use it as-is, and derive its length from
the varlena metadata.
This patch improves some run-of-the-mill md5() computations by
just under 10% in my limited tests, and passes the regression tests.
I also noticed that md5_text() wasn't checking the return value
of md5_hash(); encountering OOM at precisely the right moment
could result in returning a random md5 hash. This patch corrects
that. A better fix would be to make md5_hash() only return on
success (and/or allocate via palloc()), but since it's used in
the frontend as well I don't see an easy way to do that.
file now identifies group members by usesysid not name; this avoids
needing to depend on SearchSysCache which we can't use during startup.
(The old representation was entirely broken anyway, since we did not
regenerate the file following RENAME USER.) It's only a 95% solution
because if the group membership list is big enough to be toasted out
of line, we cannot read it during startup. I think this will do for
the moment, until we have time to implement the planned pg_role
replacement for pg_group.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
Andrew Dunstan
Tom Lane
Peter Eisentraut
Bruce Momjian
Magnus Hagander
Alvaro Herrera
Heikki Linnakangas
Robert Haas
Simon Riggs
Itagaki Takahiro
Tatsuo Ishii
Neil Conway