The previous code went into an infinite loop after overflow. In fact,
an overflow is not really an error; it just means that the current
value is the last one we need to return. So, just arrange to stop
immediately when overflow is detected.
Back-patch all the way.
Add dummy returns before every potential division-by-zero in int8.c,
because apparently further "improvements" in gcc's optimizer have
enabled it to break functions that weren't broken before.
Aurelien Jarno, via Martin Pitt
A hand-coded implementation turns out to be much faster than calling
printf(). In passing, add a few more regresion tests.
Andres Freund, with assorted, mostly cosmetic changes.
being called as aggregates, and to get the aggregate transition state memory
context if needed. Use it instead of poking directly into AggState and
WindowAggState in places that shouldn't know so much.
We should have done this in 8.4, probably, but better late than never.
Revised version of a patch by Hitoshi Harada.
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
to occur for division by zero, even though the code is carefully avoiding
that. All available evidence is that the only functions affected are
int24div, int48div, and int28div, so patch just those three functions to
include a "return" after the ereport() call.
Backpatch to 8.4 so that the fix can be tested in production builds.
For older branches our recommendation will continue to be to use -O1
on affected platforms (which are mostly non-mainstream anyway).
machine produces zero (rather than the more usual minimum-possible-integer)
for the only possible overflow case. This has been seen to occur for at least
some word widths on some hardware, and it's cheap enough to check for
everywhere. Per Peter's analysis of buildfarm reports.
This could be back-patched, but in the absence of any gripes from the field
I doubt it's worth the trouble.
int2-and-int8 implementations of the basic arithmetic operators +, -, *, /.
This doesn't really add any new functionality, but it avoids "operator is not
unique" failures that formerly occurred in these cases because the parser
couldn't decide whether to promote the int2 to int4 or int8. We could
alternatively have removed the existing cross-type operators, but
experimentation shows that the cost of an additional type coercion expression
node is noticeable compared to such cheap operators; so let's not give up any
performance here. On the other hand, I removed the int2-and-int4 modulo (%)
operators since they didn't seem as important from a performance standpoint.
Per a complaint last January from ykhuang.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
the float8 versions of the aggregates, which is all that the standard requires.
Sergey's original patch also provided versions using numeric arithmetic,
but given the size and slowness of the code, I doubt we ought to include
those in core.
can tell whether it is being used as an aggregate or not. This allows
such a function to avoid re-pallocing a pass-by-reference transition
value; normally it would be unsafe for a function to scribble on an input,
but in the aggregate case it's safe to reuse the old transition value.
Make int8inc() do this. This gets a useful improvement in the speed of
COUNT(*), at least on narrow tables (it seems to be swamped by I/O when
the table rows are wide). Per a discussion in early December with
Neil Conway. I also fixed int_aggregate.c to check this, thereby
turning it into something approaching a supportable technique instead
of being a crude hack.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
bigint variants). Clean up some inconsistencies in error message wording.
Fix scanint8 to allow trailing whitespace in INT64_MIN case. Update
int8-exp-three-digits.out, which seems to have been ignored by the last
couple of people to modify the int8 regression test, and remove
int8-exp-three-digits-win32.out which is thereby exposed as redundant.
any amount of leading or trailing whitespace (where "whitespace"
is defined by isspace()). This is for SQL conformance, as well
as consistency with other numeric types (e.g. oid, numeric).
Also refactor pg_atoi() to avoid looking at errno where not
necessary, and add a bunch of regression tests for the input
to these types.
a series of numbers, optionally using an explicit step size other
than the default value (one). Use function in the information_schema
to replace hard-wired knowledge of INDEX_MAX_KEYS. initdb forced due
to pg_proc change. Documentation update still needed -- will be
committed separately.
to note:
1) arttype is numeric. I thought this was the best way of allowing
arbitarily large factorials, even though factorial(2^63) is a large
number. Happy to change to integers if this is overkill.
2) since we're accepting numeric arguments, the patch tests for floats.
If a numeric is passed with non-zero decimal portion, an error is raised
since (from memory) they are undefined.
Gavin Sherry
division and modulo functions, to avoid problems on OS X (which fails to
trap 0 divide at all) and Windows (which traps it in some bizarre
nonstandard fashion). Standardize on 'division by zero' as the one true
spelling of this error message. Add regression tests as suggested by
Neil Conway.
to be flexible about assignment casts without introducing ambiguity in
operator/function resolution. Introduce a well-defined promotion hierarchy
for numeric datatypes (int2->int4->int8->numeric->float4->float8).
Change make_const to initially label numeric literals as int4, int8, or
numeric (never float8 anymore).
Explicitly mark Func and RelabelType nodes to indicate whether they came
from a function call, explicit cast, or implicit cast; use this to do
reverse-listing more accurately and without so many heuristics.
Explicit casts to char, varchar, bit, varbit will truncate or pad without
raising an error (the pre-7.2 behavior), while assigning to a column without
any explicit cast will still raise an error for wrong-length data like 7.3.
This more nearly follows the SQL spec than 7.2 behavior (we should be
reporting a 'completion condition' in the explicit-cast cases, but we have
no mechanism for that, so just do silent truncation).
Fix some problems with enforcement of typmod for array elements;
it didn't work at all in 'UPDATE ... SET array[n] = foo', for example.
Provide a generalized array_length_coerce() function to replace the
specialized per-array-type functions that used to be needed (and were
missing for NUMERIC as well as all the datetime types).
Add missing conversions int8<->float4, text<->numeric, oid<->int8.
initdb forced.
Use "--enable-integer-datetimes" in configuration to use this rather
than the original float8 storage. I would recommend the integer-based
storage for any platform on which it is available. We perhaps should
make this the default for the production release.
Change timezone(timestamptz) results to return timestamp rather than
a character string. Formerly, we didn't have a way to represent
timestamps with an explicit time zone other than freezing the info into
a string. Now, we can reasonably omit the explicit time zone from the
result and return a timestamp with values appropriate for the specified
time zone. Much cleaner, and if you need the time zone in the result
you can put it into a character string pretty easily anyway.
Allow fractional seconds in date/time types even for dates prior to 1BC.
Limit timestamp data types to 6 decimal places of precision. Just right
for a micro-second storage of int8 date/time types, and reduces the
number of places ad-hoc rounding was occuring for the float8-based types.
Use lookup tables for precision/rounding calculations for timestamp and
interval types. Formerly used pow() to calculate the desired value but
with a more limited range there is no reason to not type in a lookup
table. Should be *much* better performance, though formerly there were
some optimizations to help minimize the number of times pow() was called.
Define a HAVE_INT64_TIMESTAMP variable. Based on the configure option
"--enable-integer-datetimes" and the existing internal INT64_IS_BUSTED.
Add explicit date/interval operators and functions for addition and
subtraction. Formerly relied on implicit type promotion from date to
timestamp with time zone.
Change timezone conversion functions for the timetz type from "timetz()"
to "timezone()". This is consistant with other time zone coersion
functions for other types.
Bump the catalog version to 200204201.
Fix up regression tests to reflect changes in fractional seconds
representation for date/times in BC eras.
All regression tests pass on my Linux box.
Bruce Momjian
Robert Haas
Tom Lane
Magnus Hagander
PostgreSQL Daemon
Neil Conway
Joe Conway
Peter Eisentraut
Thomas G. Lockhart