checkpointer needs to reset ThisTimeLineID after
a restartpoint to allow installing/recycling new
WAL files. If recovery has already ended this
would leave ThisTimeLineID set incorrectly and
so we must reset it otherwise later checkpoints
do not have the correct timeline.
Bug report by Heikki Linnakangas.
Further investigation by Heikki and myself.
This simplifies the handling of crashes after fast promotion and various
minor cases that can exist in short timing windows around that case.
Broad fix to bug reported by Michael Paquier on -hackers,
approach prompted by Heikki Linnakangas
If OID wraparound should occur while in standalone mode (unlikely but
possible), we want to advance the counter to FirstNormalObjectId not
FirstBootstrapObjectId. Otherwise, user objects might be created with OIDs
in the system-reserved range. That isn't immediately harmful but it poses
a risk of conflicts during future pg_upgrade operations.
Noted by Andres Freund. Back-patch to all supported branches, since all of
them are supported sources for pg_upgrade operations.
Commit d22a09dc70 introduced official support
for GiST consistentFns that want to cache data using the FmgrInfo fn_extra
pointer: the idea was to preserve the cached values across gistrescan(),
whereas formerly they'd been leaked. However, there was an oversight in
that, namely that multiple scan keys might reference the same column's
consistentFn; the code would result in propagating the same cache value
into multiple scan keys, resulting in crashes or wrong answers. Use a
separate array instead to ensure that each scan key keeps its own state.
Per bug #8143 from Joel Roller. Back-patch to 9.2 where the bug was
introduced.
If a standby server has a cascading standby server connected to it, it's
possible that WAL has already been sent up to the next WAL page boundary,
splitting a WAL record in the middle, when the first standby server is
promoted. Don't throw an assertion failure or error in walsender if that
happens.
Also, fix a variant of the same bug in pg_receivexlog: if it had already
received WAL on previous timeline up to a segment boundary, when the
upstream standby server is promoted so that the timeline switch record falls
on the previous segment, pg_receivexlog would miss the segment containing
the timeline switch. To fix that, have walsender send the position of the
timeline switch at end-of-streaming, in addition to the next timeline's ID.
It was previously assumed that the switch happened exactly where the
streaming stopped.
Note: this is an incompatible change in the streaming protocol. You might
get an error if you try to stream over timeline switches, if the client is
running 9.3beta1 and the server is more recent. It should be fine after a
reconnect, however.
Reported by Fujii Masao.
What we have implemented is a radix tree (or a radix trie or a patricia
trie), but the docs and code comments incorrectly called it a "suffix tree".
Alexander Korotkov
This saves some memory from each index relcache entry. At least on a 64-bit
machine, it saves just enough to shrink a typical relcache entry's memory
usage from 2k to 1k. That's nice if you have a lot of backends and a lot of
indexes.
Heikki reported comment was wrong, so fixed
code to match the comment: we only need to
take additional locking precautions when we
have a shared lock on the buffer.
We copy the buffer before inserting an XLOG_HINT to avoid WAL CRC errors
caused by concurrent hint writes to buffer while share locked. To make this work
we refactor RestoreBackupBlock() to allow an XLOG_HINT to avoid the normal
path for backup blocks, which assumes the underlying buffer is exclusive locked.
Resulting code completely changes layout of XLOG_HINT WAL records, but
this isn't even beta code, so this is a low impact change.
In passing, avoid taking WALInsertLock for full page writes on checksummed
hints, remove related cruft from XLogInsert() and improve xlog_desc record for
XLOG_HINT.
Andres Freund
Bug report by Fujii Masao, testing by Jeff Janes and Jaime Casanova,
review by Jeff Davis and Simon Riggs. Applied with changes from review
and some comment editing.
In CLUSTER, VACUUM FULL and ALTER TABLE SET TABLESPACE
I erroneously set checksum before log_newpage, which
sets the LSN and invalidates the checksum. So set
checksum immediately *after* log_newpage.
Bug report Fujii Masao, Fix and patch by Jeff Davis
The pg_start_backup() and pg_stop_backup() functions checked the privileges
of the initially-authenticated user rather than the current user, which is
wrong. For example, a user-defined index function could successfully call
these functions when executed by ANALYZE within autovacuum. This could
allow an attacker with valid but low-privilege database access to interfere
with creation of routine backups. Reported and fixed by Noah Misch.
Security: CVE-2013-1901
In a heap update, if the old and new tuple were on different pages, and the
new page no longer existed (because it was subsequently truncated away by
vacuum), heap_xlog_update forgot to release the pin on the old buffer. This
bug was introduced by the "Fix multiple problems in WAL replay" patch,
commit 3bbf668de9 (on master branch).
With full_page_writes=off, this triggered an "incorrect local pin count"
error later in replay, if the old page was vacuumed.
This fixes bug #7969, reported by Yunong Xiao. Backpatch to 9.0, like the
commit that introduced this bug.
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
Remove use of PageSetTLI() from all page manipulation functions
and adjust README to indicate change in the way we make changes
to pages. Repurpose those bytes into the pd_checksum field and
explain how that works in comments about page header.
Refactoring ahead of actual feature patch which would make use
of the checksum field, arriving later.
Jeff Davis, with comments and doc changes by Simon Riggs
Direction suggested by Robert Haas; many others providing
review comments.
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
If we were about to enter archive recovery after crash recovery, we scanned
the archive for the latest tli history file, and set the recovery target
timeline to that. However, when we actually tried to read the history file,
we would not fetch the file from the archive, because we were not in archive
recovery yet.
To fix, make readTimeLineHistory and existsTimeLineHistory to always fetch
the file from archive if archive recovery is requested, even if we're not in
archive recovery yet.
Backpatch to 9.2. Mitsumasa KONDO
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
fmgr_sql had been designed on the assumption that the FmgrInfo it's called
with has only query lifespan. This is demonstrably unsafe in connection
with range types, as shown in bug #7881 from Andrew Gierth. Fix things
so that we re-generate the function's cache data if the (sub)transaction
it was made in is no longer active.
Back-patch to 9.2. This might be needed further back, but it's not clear
whether the case can realistically arise without range types, so for now
I'll desist from back-patching further.
We must still initialize minRecoveryPoint if we start straight with archive
recovery, e.g when recovering from a normal base backup taken with
pg_start/stop_backup. Otherwise we never consider the system consistent.
If you create a base backup using an atomic filesystem snapshot, and try to
perform PITR starting from that base backup, or if you just kill a master
server and create recovery.conf to put it into standby mode, we don't know
how far we need to recover before reaching consistency. Normally in crash
recovery, we replay all the WAL present in pg_xlog, and assume that we're
consistent after that. And normally in archive recovery, minRecoveryPoint,
backupEndRequired, or backupEndPoint is set in the control file, indicating
how far we need to replay to reach consistency. But if the server was
previously up and running normally, and you kill -9 it or take an atomic
filesystem snapshot, none of those fields are set in the control file.
The solution is to perform crash recovery first, replaying all the WAL in
pg_xlog. After that's done, we assume that the system is consistent like in
normal crash recovery, and switch to archive recovery mode after that.
Per report from Kyotaro HORIGUCHI. In his scenario, recovery.conf was
created after "pg_ctl stop -m i". I'm not sure we need to support that exact
scenario, but we should support backing up using a filesystem snapshot,
which looks identical.
This issue goes back to at least 9.0, where hot standby was introduced and
we started to track when consistency is reached. In 9.1 and 9.2, we would
open up for hot standby too early, and queries could briefly see an
inconsistent state. But 9.2 made it more visible, as we started to PANIC if
we see a reference to a non-existing page during recovery, if we've already
reached consistency. This is a fairly big patch, so back-patch to 9.2 only,
where the issue is more visible. We can consider back-patching further after
this has received some more testing in 9.2 and master.
This enables non-backend code, such as pg_xlogdump, to use it easily.
The previous location, in src/backend/catalog/catalog.c, made that
essentially impossible because that file depends on many backend-only
facilities; so this needs to live separately.
Revert my earlier fix for the bug that unarchived WAL files get deleted on
crash recovery, commit c9cc7e05c6. We create
a .done file for files streamed or restored from archive, so the WAL file
recycling logic used during normal operation works just as well during
archive recovery.
Per Fujii Masao's suggestion.
This is a forward-patch of commit 6f4b8a4f4f,
applied to 9.2 back in August. The plan was to do something else in master,
but it looks like it's not going to happen, so let's just apply the 9.2
solution to master as well.
Fujii Masao
Currently it's only possible for loadable modules to get control during
post-commit cleanup of a transaction. That doesn't work too well if they
want to do something that could throw an error; for example, an FDW might
need to issue a remote commit, which could well fail. To improve matters,
extend the existing APIs for XactCallback and SubXactCallback functions
to provide new pre-commit events for this purpose.
The release notes will need to mention that existing callback functions
should be checked to make sure they don't do something unwanted when one
of the new event types occurs. In the examples within our source tree,
contrib/sepgsql was fine but plpgsql had been a bit too cute.
The reason this wasn't supported before was that GiST indexes need an
increasing sequence to detect concurrent page-splits. In a regular WAL-
logged GiST index, the LSN of the page-split record is used for that
purpose, and in a temporary index, we can get away with a backend-local
counter. Neither of those methods works for an unlogged relation.
To provide such an increasing sequence of numbers, create a "fake LSN"
counter that is saved and restored across shutdowns. On recovery, unlogged
relations are blown away, so the counter doesn't need to survive that
either.
Jeevan Chalke, based on discussions with Robert Haas, Tom Lane and me.
The intention was to request a regular online checkpoint immediately after
end of recovery, when performing "fast promotion". However, because the
checkpoint was requested before other backends were allowed to write WAL,
the checkpointer process performed a restartpoint rather than a checkpoint.
Delay the RequestCheckPoint call until after recovery has truly ended, so
that you get a real checkpoint.
This isn't used for anything but a sanity check at the moment, but it could
be highly valuable for debugging purposes. It could also be used to recreate
timeline history by traversing WAL, which seems useful.
After further reflection I was unconvinced that the existing coding is
guaranteed to return valid union datums in every code path for multi-column
indexes. Fix that by forcing a gistunionsubkey() call at the end of the
recursion. Having done that, we can remove some clearly-redundant calls
elsewhere. This should be a little faster for multi-column indexes (since
the previous coding would uselessly do such a call for each column while
unwinding the recursion), as well as much harder to break.
Also, simplify the handling of cases where one side or the other of a
primary split contains only don't-care tuples. The previous coding used a
very ugly hack in removeDontCares() that essentially forced one random
tuple to be treated as non-don't-care, providing a random initial choice of
seed datum for the secondary split. It seems unlikely that that method
will give better-than-random splits. Instead, treat such a split as
degenerate and just let the next column determine the split, the same way
that we handle fully degenerate cases where the two sides produce identical
union datums.
This LOG message was put in over five years ago with the evident
expectation that we'd make all GiST opclasses support secondary split
directly. However, no such thing ever happened, and indeed the number of
opclasses supporting it decreased to zero in 9.2. The reason is that
improving on the default implementation isn't that easy --- the
opclass-specific code that did exist, before 9.2, doesn't appear to have
been any improvement over the default.
Hence, remove the message altogether. There's certainly no point in
nagging users about this in released branches, but I doubt that we'll
ever implement complete opclass-specific support anyway.
Not only is this implementation of secondary-split not better than the
default implementation in gistsplit.c, it's actually worse. The gistsplit.c
code at least looks to see if switching the left and right sides would make
a better merge with the previously-split tuples, while this doesn't.
In any case it's rather useless to support secondary split only in an edge
case. There used to be more complete support for it here (in chooseLR()),
but that was removed in commit 7f3bd86843.
It appears to me though that the chooseLR() code was really isomorphic to
the default implementation, since it was still based on choosing the cheaper
way of adding two sub-split vectors that had been chosen without regard to
the primary split initially. I think an implementation of secondary split
that could beat the default implementation would have to be pretty fully
integrated into the split algorithm, not plastered on at the end.
Back-patch to 9.2, but not further; previous branches have the chooseLR()
code which I don't feel a great need to mess with. This is mainly so we
just have two behaviors and not three among the various branches (IOW, this
patch is cleanup for commit 7f3bd86843e5aad84585a57d3f6b80db3c609916's
incomplete removal of secondary-split support).
Improve comments, rename some variables and functions, slightly simplify
a couple of APIs, in an attempt to make this code readable by people other
than its original author.
Even though this is essentially just cosmetic, back-patch to all active
branches, because otherwise it's going to make back-patching future fixes
in this file very painful.
While there's considerable doubt that we want fuzzy behavior in the
geometric operators at all (let alone as currently implemented), nobody is
stepping forward to redesign that stuff. In the meantime it behooves us
to make sure that index searches agree with the behavior of the underlying
operators. This patch fixes two problems in this area.
First, gist_box_same was using fuzzy equality, but it really needs to use
exact equality to prevent not-quite-identical upper index keys from being
treated as identical, which for example would prevent an existing upper
key from being extended by an amount less than epsilon. This would result
in inconsistent indexes. (The next release notes will need to recommend
that users reindex GiST indexes on boxes, polygons, circles, and points,
since all four opclasses use gist_box_same.)
Second, gist_point_consistent used exact comparisons for upper-page
comparisons in ~= searches, when it needs to use fuzzy comparisons to
ensure it finds all matches; and it used fuzzy comparisons for point <@ box
searches, when it needs to use exact comparisons because that's what the
<@ operator (rather inconsistently) does.
The added regression test cases illustrate all three misbehaviors.
Back-patch to all active branches. (8.4 did not have GiST point_ops,
but it still seems prudent to apply the gist_box_same patch to it.)
Alexander Korotkov, reviewed by Noah Misch
When considering a non-last column in a multi-column GiST index,
gistsplit.c tries to improve on the split chosen by the opclass-specific
pickSplit function by considering penalties for the next column. However,
there were two bugs in this code: it failed to recompute the union keys for
the leftmost index columns, even though these might well change after
reassigning tuples; and it included the old union keys in the recomputation
for the columns it did recompute, so that those keys couldn't get smaller
even if they should. The first problem could result in an invalid index
in which searches wouldn't find index entries that are in fact present;
the second would make the index less efficient to search.
Both of these errors were caused by misuse of gistMakeUnionItVec, whose
API was designed in a way that just begged such errors to be made. There
is no situation in which it's safe or useful to compute the union keys for
a subset of the index columns, and there is no caller that wants any
previous union keys to be included in the computation; so the undocumented
choice to treat the union keys as in/out rather than pure output parameters
is a waste of code as well as being dangerous.
Hence, rather than just making a minimal patch, I've changed the API of
gistMakeUnionItVec to remove the "startkey" parameter (it now always
processes all index columns) and treat the attr/isnull arrays as purely
output parameters.
In passing, also get rid of a couple of unnecessary and dangerous uses
of static variables in gistutil.c. It's remarkable that the one in
gistMakeUnionKey hasn't given us portability troubles before now, because
in addition to posing a re-entrancy hazard, it was unsafely assuming that
a static char[] array would have at least Datum alignment.
Per investigation of a trouble report from Tomas Vondra. (There are also
some bugs in contrib/btree_gist to be fixed, but that seems like material
for a separate patch.) Back-patch to all supported branches.
The new rmgrlist.h header, containing all necessary data
about built-in resource managers, allows other pieces of code to
access them.
In particular, this allows a future pg_xlogdump program to extract
rm_desc function pointers, without having to keep a duplicate list of
them.
Failing to do this results in almost all updates to system catalogs
being non-HOT updates, because the OID column would differ (not having
been set for the new tuple), which is an indexed column.
While at it, make sure to set the tableoid early in both old and new
tuples as well. This isn't of much consequence, since that column is
seldom (never?) indexed.
Report and patch from Andres Freund.
Bruce Momjian
Simon Riggs
Tom Lane
Heikki Linnakangas
Robert Haas
Kevin Grittner
Alvaro Herrera