Calling fseek() or ftello() on a handle to a non-seeking device such as
a pipe or a communications device is not supported. Unfortunately,
MSVC's flavor of these routines, _fseeki64() and _ftelli64(), do not
return an error when given a pipe as handle. Some of the logic of
pg_dump and restore relies on these routines to check if a handle is
seekable, causing failures when passing the contents of pg_dump to
pg_restore through a pipe, for example.
This commit introduces wrappers for fseeko() and ftello() on MSVC so as
any callers are able to properly detect the cases of non-seekable
handles. This relies mainly on GetFileType(), sharing a bit of code
with the MSVC port for fstat(). The code in charge of getting a file
type is refactored into a new file called win32common.c, shared by
win32stat.c and the new win32fseek.c. It includes the MSVC ports for
fseeko() and ftello().
Like 765f5df, this is backpatched down to 14, where the fstat()
implementation for MSVC is able to understand about files larger than
4GB in size. Using a TAP test for that is proving to be tricky as
IPC::Run handles the pipes by itself, still I have been able to check
the fix manually.
Reported-by: Daniel Watzinger
Author: Juan José Santamaría Flecha, Michael Paquier
Discussion: https://postgr.es/m/CAC+AXB26a4EmxM2suXxPpJaGrqAdxracd7hskLg-zxtPB50h7A@mail.gmail.com
Backpatch-through: 14
Clarify the goals of the recently added guidelines for rmgrdesc authors:
to avoid gratuitous inconsistencies across resource managers, and to
make it reasonably easy to write a reusable custom parser.
Beyond that, the guidelines leave rmgrdesc authors with a significant
amount of leeway. This even includes the leeway to invent custom
conventions (in cases where it's warranted).
Follow-up to commit 7d8219a4.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkbYuvwYKm-Y-72QEh6SPMQcAo9uONv+mR3bMGcu9E_Cg@mail.gmail.com
Make heap desc routines that output status bit as arrays of constants
avoid outputting array literals that contain superfluous punctuation
characters that complicate parsing the output. Also make sure that no
heap desc routine repeats the same key name (at the same nesting level),
for the same reason. Arguably, these were both oversights in commit
7d8219a4.
In passing, make the desc output code (which covers Heap's DELETE,
UPDATE, HOT_UPDATE, LOCK, and LOCK_UPDATED record types) consistent in
terms of the output order of each field. This order also matches WAL
record struct order. Heap's DELETE desc output now shows the record's
xmax field for the first time (just like UPDATE/HOT_UPDATE records).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=pNYtxiJ2Jx5Lj=fKo1OEZ4GE0p_kct+ugAUTqBwU46g@mail.gmail.com
Make xl_heap_lock's infobits_set field of type uint8, not int8. Using
int8 isn't appropriate given that the field just holds status bits.
This fixes an oversight in commit 0ac5ad5134.
In passing rename the nearby TransactionId field to "xmax" to make
things consistency with related records, such as xl_heap_lock_updated.
Deliberately avoid a bump in XLOG_PAGE_MAGIC. No backpatch, either.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkCd3kOS8b7Rfxw7Mh1_6jvX=Nzo-CWR1VBTiOtVZkWHA@mail.gmail.com
At least one slow buildfarm system (hoverfly) showed that the database
creation was not replicated before we try to create logical replication slots
on the standby, in that database.
Reported-by: Noah Misch <noah@leadboat.com>
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/20230411053657.GA1177147@rfd.leadboat.com
There's no need to check if opt->arg is NULL since defGetString() already
does that and raises an ERROR if it is. Let's just remove that check.
Also, combine the two remaining ERRORs into a single check. It seems
better to give an indication about what sort of values we're looking for
rather than just to state that the value given isn't valid. Make
BUFFER_USAGE_LIMIT uppercase in this ERROR message too. It's already
upper case in one other error message, so make that consistent.
Reported-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230411.102335.1643720544536884844.horikyota.ntt@gmail.com
The tables in "71.3. Extensibility" listing the support functions
for bloom and minmax-multi opclasses should include the associated
options function. While this isn't quite as required as the rest,
you need it for full functionality of the opclass.
Back-patch to v14 where these functions were added.
We cannot use the generic array_desc approach with per-tuple nbtree
posting list update metadata because array_desc can only deal with fixed
width elements (e.g., page offset numbers). Using array_desc led to
incorrect rmgr descriptions for updates from nbtree DELETE/VACUUM WAL
records.
To fix, add specialized code to describe the update metadata as array
elements in desc output. We now iterate over the update metadata using
an approach that matches related REDO routines.
Also stop showing the updates offset number array separately in nbtree
DELETE/VACUUM desc output. It's redundant information, since the same
page offset numbers appear in the description of each individual update
element. Also make some small tweaks to the way that we format arrays
in all desc routines (not just nbtree desc routines) to make arrays a
little less verbose.
Oversight in commit 1c453cfd, which enhanced the nbtree rmgr desc
routines.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkbYuvwYKm-Y-72QEh6SPMQcAo9uONv+mR3bMGcu9E_Cg@mail.gmail.com
EXTRACT(EPOCH), EXTRACT(SECOND), and some related cases print more
trailing zeroes than they used to. This behavior change happened
with commit a2da77cdb (Change return type of EXTRACT to numeric),
and it was intentional according to the commit log:
- Return values when extracting fields with possibly fractional
values, such as second and epoch, now have the full scale that the
value has internally (so, for example, '1.000000' instead of just
'1').
It's been like that for two releases now, so while I suggested
changing this back, it's probably better to adjust the documentation
examples.
Per bug #17866 from Евгений Жужнев. Back-patch to v14 where the
change came in.
Discussion: https://postgr.es/m/17866-18eb70095b1594e2@postgresql.org
Checking for the required versions of IO::Pty as well as IPC::Run
can be achieved with a single eval call, and by using the VERSION
function the comparison is guaranteed to follow the same rules as
calling 'use' on the module with a version.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/6d880ea2-f8ca-f458-4dcd-a7a3e6d6cd7c@dunslane.net
The new direct I/O test deliberately uses a very small shared_buffers to
force some disk transfers without making the data set large and slow,
but ran into a problem with wal_level = minimal: log_newpage_range()
pins many buffers, leading to a few intermittent "no unpinned buffers
available" errors.
We could presumably fix that by adjusting shared_buffers, but crake
seems to be trying to tell us something interesting with these settings,
so let's just avoid wal_level = minimal in this test for now.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230408060408.n7xdwk3mxj5oykt6%40awork3.anarazel.de
If a variable has an initialization expression that wraps onto the
next line(s), pg_bsd_indent will now indent the continuation lines
one stop, instead of aligning them flush with the variable declaration.
We've been holding off applying this until the last v16 CF finished,
but now it's time.
Thomas Munro and Tom Lane
Discussion: https://postgr.es/m/20230120013137.7ky7nl4e4zjorrfa@awork3.anarazel.de
Our convention for some time has been that successful tests shouldn't
print anything on stderr. A stray "diag" call violated that, and
for that matter messed up the normal TAP progress display.
IPC::Run versions prior to 0.98 cause the interactive session to time out,
so SKIP the test in case these versions are detected (they are within the
base requirement for our TAP tests in general). Error reported by the BF
and investigation by Tom Lane.
Discussion: https://postgr.es/m/414A86BD-986B-48A7-A1E4-EEBCE5AF08CB@yesql.se
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Previously, a PostgreSQL-specific callback checked by the regex engine
had a way to trigger a special error code REG_CANCEL if it detected that
the next call to CHECK_FOR_INTERRUPTS() would certainly throw via
ereport().
A later proposed bugfix aims to move some complex logic out of signal
handlers, so that it won't run until the next CHECK_FOR_INTERRUPTS(),
which makes the above design impossible unless we split
CHECK_FOR_INTERRUPTS() into two phases, one to run logic and another to
ereport(). We may develop such a system in the future, but for the
regex code it is no longer necessary.
An earlier commit moved regex memory management over to our
MemoryContext system. Given that the purpose of the two-phase interrupt
checking was to free memory before throwing, something we don't need to
worry about anymore, it seems simpler to inject CHECK_FOR_INTERRUPTS()
directly into cancelation points, and just let it throw.
Since the plan is to keep PostgreSQL-specific concerns separate from the
main regex engine code (with a view to bein able to stay in sync with
other projects), do this with a new macro INTERRUPT(), customizable in
regcustom.h and defaulting to nothing.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Now that our regex engine uses palloc(), it's not necessary to set up a
special memory context callback to free compiled regexes. The regex has
no resources other than the memory that is already going to be freed in
bulk.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Previously, regex_t objects' memory was managed with malloc() and free()
directly. Switch to palloc()-based memory management instead.
Advantages:
* memory used by cached regexes is now visible with MemoryContext
observability tools
* cleanup can be done automatically in certain failure modes
(something that later commits will take advantage of)
* cleanup can be done in bulk
On the downside, there may be more fragmentation (wasted memory) due to
per-regex MemoryContext objects. This is a problem shared with other
cached objects in PostgreSQL and can probably be improved with later
tuning.
Thanks to Noah Misch for suggesting this general approach, which
unblocks later work on interrupts.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Unsurprisingly, this requires wal_level = logical to be set on the primary and
standby. The infrastructure added in 26669757b6 ensures that slots are
invalidated if the primary's wal_level is lowered.
Creating a slot on a standby waits for a xl_running_xact record to be
processed. If the primary is idle (and thus not emitting xl_running_xact
records), that can take a while. To make that faster, this commit also
introduces the pg_log_standby_snapshot() function. By executing it on the
primary, completion of slot creation on the standby can be accelerated.
Note that logical decoding on a standby does not itself enforce that required
catalog rows are not removed. The user has to use physical replication slots +
hot_standby_feedback or other measures to prevent that. If catalog rows
required for a slot are removed, the slot is invalidated.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion, for the addition of the pg_log_standby_snapshot() function.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de> (in an older version)
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: FabrÌzio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Physical walsenders can't send data until it's been flushed; logical
walsenders can't decode and send data until it's been applied. On the
standby, the WAL is flushed first, which will only wake up physical
walsenders; and then applied, which will only wake up logical
walsenders.
Previously, all walsenders were awakened when the WAL was flushed. That
was fine for logical walsenders on the primary; but on the standby the
flushed WAL would have been not applied yet, so logical walsenders were
awakened too early.
Per idea from Jeff Davis and Amit Kapila.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1+zO5LUeisabX10c81LU-fWMKO4M9Wyg1cdkbW7Hqh6vQ@mail.gmail.com
During WAL replay on the standby, when a conflict with a logical slot is
identified, invalidate such slots. There are two sources of conflicts:
1) Using the information added in 6af1793954, logical slots are invalidated if
required rows are removed
2) wal_level on the primary server is reduced to below logical
Uses the infrastructure introduced in the prior commit. FIXME: add commit
reference.
Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to
interrupt use of a slot, if called in the startup process. The new recovery
conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the pg_stat_database_conflicts column.
Bumps PGSTAT_FILE_FORMAT_ID for the same reason.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Needed for logical decoding on a standby. Slots need to be invalidated because
of the horizon if rows required for logical decoding are removed. If the
primary's wal_level is lowered from 'logical', logical slots on the standby
need to be invalidated.
The new invalidation methods will be used in a subsequent commit.
Logical slots that have been invalidated can be identified via the new
pg_replication_slots.conflicting column.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the new pg_replication_slots column.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Previously we had checks for this in multiple places. Support for logical
decoding on standbys will add other forms of invalidation, making it worth
while to centralize the checks.
This slightly changes the error message for both the walsender and SQL
interface. Particularly the SQL interface error was inaccurate, as the "This
slot has never previously reserved WAL" portion was unreachable.
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
This is mainly useful because the upcoming logical-decoding-on-standby feature
adds further reasons for invalidating slots, and we don't want to end up with
multiple invalidated_* fields, or check different attributes.
Eventually we should consider not resetting restart_lsn when invalidating a
slot due to max_slot_wal_keep_size. But that's a user visible change, so left
for later.
Increases SLOT_VERSION, due to the changed field (with a different alignment,
no less).
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Provide a way to ask the kernel to use O_DIRECT (or local equivalent)
where available for data and WAL files, to avoid or minimize kernel
caching. This hurts performance currently and is not intended for end
users yet. Later proposed work would introduce our own I/O clustering,
read-ahead, etc to replace the facilities the kernel disables with this
option.
The only user-visible change, if the developer-only GUC is not used, is
that this commit also removes the obscure logic that would activate
O_DIRECT for the WAL when wal_sync_method=open_[data]sync and
wal_level=minimal (which also requires max_wal_senders=0). Those are
non-default and unlikely settings, and this behavior wasn't (correctly)
documented. The same effect can be achieved with io_direct=wal.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a
later commit, we need the addresses of user space buffers to be well
aligned. The exact requirements vary by OS and file system (typically
sectors and/or memory pages). The address alignment size is set to
4096, which is enough for currently known systems: it matches modern
sectors and common memory page size. There is no standard governing
O_DIRECT's requirements so we might eventually have to reconsider this
with more information from the field or future systems.
Aligning I/O buffers on memory pages is also known to improve regular
buffered I/O performance.
Three classes of I/O buffers for regular data pages are adjusted:
(1) Heap buffers are now allocated with the new palloc_aligned() or
MemoryContextAllocAligned() functions introduced by commit 439f6175.
(2) Stack buffers now use a new struct PGIOAlignedBlock to respect
PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer
pool is also aligned in shared memory.
WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for
XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus
for O_DIRECT WAL writes to fail to be well aligned, but that's a
pre-existing condition and will be addressed by a later commit.
BufFiles are not yet addressed (there's no current plan to use O_DIRECT
for those, but they could potentially get some incidental speedup even
in plain buffered I/O operations through better alignment).
If we can't align stack objects suitably using the compiler extensions
we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to
0. This avoids the need to consider systems that have O_DIRECT but
can't align stack objects the way we want; such systems could in theory
be supported with more work but we don't currently know of any such
machines, so it's easier to pretend there is no O_DIRECT support
instead. That's an existing and tested class of system.
Add assertions that all buffers passed into smgrread(), smgrwrite() and
smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack
alignment tricks may be unavailable) or the block size has been set too
small to allow arrays of buffers to be all aligned.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
Actually, the correct fix for this is "we don't need this at all",
because this program isn't dealing in any non-ASCII data. The
dependency on Data::Dumper seems to be a leftover too.
Discussion: https://postgr.es/m/3287943.1680922997@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
a9c70b46db and 8aaa04b32S added counting of IO operations to a new view,
pg_stat_io. Now, add IO timing for reads, writes, extends, and fsyncs to
pg_stat_io as well.
This combines the tracking for pgBufferUsage with the tracking for pg_stat_io
into a new function pgstat_count_io_op_time(). This should make it a bit
easier to avoid the somewhat costly instr_time conversion done for
pgBufferUsage.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ay5iKmnbXZ3DsauViF3eMxu4m1oNnJXqV_HyqYeg55Ww%40mail.gmail.com
Show a detailed description of the page offset number arrays that appear
in certain nbtree WAL records.
Also brings nbtree desc routines in line with the guidelines established
by recent commit 7d8219a4.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/flat/20230109215842.fktuhesvayno6o4g%40awork3.anarazel.de
Similar to 8dff2f224, this disables DNS lookups by the Kerberos library
to look up the KDC and the realm while the Kerberos tests are running.
In some environments, these lookups can take a long time and end up
timing out and causing tests to fail. Further, since this isn't really
our domain, we shouldn't be sending out these DNS requests during our
tests.
Add helper functions that output arrays in a standard format, and use
the functions inside heapdesc routines. This allows tools like
pg_walinspect to show a detailed description of the page offset number
arrays for records like PRUNE and VACUUM (unless there was an FPI).
Also document the conventions that desc routines should follow. Only
the heapdesc routines follow the conventions for now, so they're just
guidelines for the time being.
Based on a suggestion from Andres Freund.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/flat/20230109215842.fktuhesvayno6o4g%40awork3.anarazel.de
This modernized version of Soundex works significantly better than
the original, particularly for non-English names.
Dag Lem, reviewed by quite a few people along the way
Discussion: https://postgr.es/m/yger1atbgfy.fsf@sid.nimrod.no
Peter Eisentraut
Michael Paquier
Peter Geoghegan
Andres Freund
Robert Haas
David Rowley
Tom Lane
Daniel Gustafsson
Thomas Munro
Andrew Dunstan
Stephen Frost
Amit Kapila