CheckConstraintFetch() leaked a cstring in the caller's context for each
CHECK constraint expression it copied into the relcache. Ordinarily that
isn't problematic, but it can be during CLOBBER_CACHE testing because so
many reloads can happen during a single query; so complicate the code
slightly to allow freeing the cstring after use. Per testing on buildfarm
member barnacle.
This is exactly like the leak fixed in AttrDefaultFetch() by commit
078b2ed291. (Yes, this time I did look for
other instances of the same coding pattern :-(.) Like that patch, no
back-patch, since it seems unlikely that there's any problem except under
very artificial test conditions.
BTW, it strikes me that both of these places would require further work
comparable to commit ab8c84db2f, if we ever
supported defaults or check constraints on system catalogs: they both
assume they are copying into an empty relcache data structure, and that
conceivably wouldn't be the case during recursive reloading of a system
catalog. This does not seem worth worrying about for the moment, since
there is no near-term prospect of supporting any such thing. So I'll
just note the possibility for the archives' sake.
When replacing rd_indexlist, rd_indexattr, etc, we neglected to pfree any
old value of these fields. Under ordinary circumstances, the old value
would always be NULL, so this seemed reasonable enough. However, in cases
where we're rebuilding a system catalog's relcache entry and another cache
flush occurs on that same catalog meanwhile, it's possible for the field to
not be NULL when we return to the outer level, because we already refilled
it while recovering from the inner flush. This leads to a fairly small
session-lifespan leak in CacheMemoryContext. In real-world usage the leak
would be too small to notice; but in testing with CLOBBER_CACHE_RECURSIVELY
the leakage can add up to the point of causing OOM failures, as reported by
Tomas Vondra.
The issue has been there a long time, but it only seems worth fixing in
HEAD, like the previous fix in this area (commit 078b2ed291).
This could be useful for datatypes like text, where we might want
to optimize for some collations but not others. However, this patch
doesn't introduce any new sortsupport functions that work this way;
it merely revises the code so that future patches may do so.
Patch by me. Review by Peter Geoghegan.
The catcache code is effectively assuming this already, so let's insist
that the catalog and index are actually declared that way.
Having done that, the comments in indexing.h about non-unique indexes
not being used for catcaches are completely redundant not just mostly so;
and we didn't have such a comment for every such index anyway. So let's
get rid of them.
Per discussion of whether we should identify primary keys for catalogs.
We might or might not take that further step, but this change in itself
will allow quicker detection of misdeclared catcaches, so it seems worth
doing in any case.
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
Define padding bytes in SharedInvalidationMessage structs to be
defined. Otherwise the sinvaladt.c ringbuffer, which is accessed by
multiple processes, will cause spurious valgrind warnings about
undefined memory being used. That's because valgrind remembers the
undefined bytes from the last local process's store, not realizing
that another process has written since, filling the previously
uninitialized bytes.
That's what I get for not fully retesting the final version of the patch.
The replace_allowed cross-check needs an additional special case for
bootstrapping.
RelationCacheInsert() ignored the possibility that hash_search(HASH_ENTER)
might find a hashtable entry already present for the same OID. However,
that can in fact occur during recursive relcache load scenarios. When it
did happen, we overwrote the pointer to the pre-existing Relation, causing
a session-lifespan leakage of that entire structure. As far as is known,
the pre-existing Relation would always have reference count zero by the
time we arrive back at the outer insertion, so add code that deletes the
pre-existing Relation if so. If by some chance its refcount is positive,
elog a WARNING and allow the pre-existing Relation to be leaked as before.
Also, AttrDefaultFetch() was sloppy about leaking the cstring form of the
pg_attrdef.adbin value it's copying into the relcache structure. This is
only a query-lifespan leakage, and normally not very significant, but it
adds up during CLOBBER_CACHE testing.
These bugs are of very ancient vintage, but I'll refrain from back-patching
since there's no evidence that these leaks amount to anything in ordinary
usage.
rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr. Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext. There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap. Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.
Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).
Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.
The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
VALIDATE CONSTRAINT
CLUSTER ON
SET WITHOUT CLUSTER
ALTER COLUMN SET STATISTICS
ALTER COLUMN SET ()
ALTER COLUMN RESET ()
All other sub-commands use AccessExclusiveLock
Simon Riggs and Noah Misch
Reviews by Robert Haas and Andres Freund
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
We may process relcache flush requests during transaction startup or
shutdown. In general it's not terribly safe to do catalog access at those
times, so the code's habit of trying to immediately revalidate unflushable
relcache entries is risky. Although there are no field trouble reports
that are positively traceable to this, we have been able to demonstrate
failure of the assertions recently added in RelationIdGetRelation() and
SearchCatCache(). On the other hand, it seems safe to just postpone
revalidation of the cache entry until we're inside a valid transaction.
The one case where this is questionable is where we're exiting a
subtransaction and the outer transaction is holding the relcache entry open
--- but if we made any significant changes to the rel inside such a
subtransaction, we've got problems anyway. There are mechanisms in place
to prevent that (to wit, locks for cross-session cases and
CheckTableNotInUse() for intra-session cases), so let's trust to those
mechanisms to keep us out of trouble.
Commit 42c80c696e added an
Assert(IsTransactionState()) in SearchCatCache(), to catch
any code that thought it could do a catcache lookup outside
transactions. Extend the same idea to relcache lookups.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
The old code entered a new hash table entry first, then scanned
pg_class to determine what value to fill in, and then populated the
entry. This fails to work properly if a cache invalidation happens
as a result of opening pg_class. Repair.
Along the way, get rid of the idea of blowing away the entire hash
table as a method of processing invalidations. Instead, just delete
all the entries one by one. This is probably not quite as cheap but
it's simpler, and shouldn't happen often.
Andres Freund
Pending patches for logical replication will use this to determine
which columns of a tuple ought to be considered as its candidate key.
Andres Freund, with minor, mostly cosmetic adjustments by me
Commit 95ef6a3448 removed the
ability to create rules on an individual column as of 7.3, but
left some residual code which has since been useless. This cleans
up that dead code without any change in behavior other than
dropping the useless column from the catalog.
If the hash table backing a catalog cache becomes too full (fillfactor > 2),
enlarge it. A new buckets array, double the size of the old, is allocated,
and all entries in the old hash are moved to the right bucket in the new
hash.
This has two benefits. First, cache lookups don't get so expensive when
there are lots of entries in a cache, like if you access hundreds of
thousands of tables. Second, we can make the (initial) sizes of the caches
much smaller, which saves memory.
This patch dials down the initial sizes of the catcaches. The new sizes are
chosen so that a backend that only runs a few basic queries still won't need
to enlarge any of them.
This GUC context value was once only used by ALTER DATABASE SET and
ALTER USER SET. That's not true anymore, though, so rewrite the
comments to be a bit more general.
Patch in HEAD only, since this is just an internal documentation issue.
The previous coding in plancache.c essentially used 10% of the estimated
runtime as its cost estimate for planning. This can be pretty bogus,
especially when the estimated runtime is very small, such as in a simple
expression plan created by plpgsql, or a simple INSERT ... VALUES.
While we don't have a really good handle on how planning time compares
to runtime, it seems reasonable to use an estimate based on the number of
relations referenced in the query, with a rather large multiplier. This
patch uses 1000 * cpu_operator_cost * (nrelations + 1), so that even a
trivial query will be charged 1000 * cpu_operator_cost for planning.
This should address the problem reported by Marc Cousin and others that
9.2 and up prefer custom plans in cases where the planning time greatly
exceeds what can be saved.
Also, tweak wording in comments (per Andres) and documentation (myself)
to point out that it's the database's default tablespace that can be
passed as 0, not DEFAULTTABLESPACE_OID. Robert Haas noticed the bug in
the code, but didn't update the accompanying prose.
Future patches are expected to introduce logical replication that
works by decoding WAL. WAL contains relfilenodes rather than relation
OIDs, so this infrastructure will be needed to find the relation OID
based on WAL contents.
If logical replication does not make it into this release, we probably
should consider reverting this, since it will add some overhead to DDL
operations that create new relations. One additional index insert per
pg_class row is not a large overhead, but it's more than zero.
Another way of meeting the needs of logical replication would be to
the relation OID to WAL, but that would burden DML operations, not
only DDL.
Andres Freund, with some changes by me. Design review, in earlier
versions, by Álvaro Herrera.
SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
We need to increment the refcount on the composite type's cached tuple
descriptor while we do lookups of its column types. Otherwise a cache
flush could occur and release the tuple descriptor before we're done with
it. This fails reliably with -DCLOBBER_CACHE_ALWAYS, but the odds of a
failure in a production build seem rather low (since the pfree'd descriptor
typically wouldn't get scribbled on immediately). That may explain the
lack of any previous reports. Buildfarm issue noted by Christian Ullrich.
Back-patch to 9.1 where the bogus code was added.
Previously this state was represented by whether the view's disk file had
zero or nonzero size, which is problematic for numerous reasons, since it's
breaking a fundamental assumption about heap storage. This was done to
allow unlogged matviews to revert to unpopulated status after a crash
despite our lack of any ability to update catalog entries post-crash.
However, this poses enough risk of future problems that it seems better to
not support unlogged matviews until we can find another way. Accordingly,
revert that choice as well as a number of existing kluges forced by it
in favor of creating a pg_class.relispopulated flag column.
When creating or manipulating a cached plan for a transaction control
command (particularly ROLLBACK), we must not perform any catalog accesses,
since we might be in an aborted transaction. However, plancache.c busily
saved or examined the search_path for every cached plan. If we were
unlucky enough to do this at a moment where the path's expansion into
schema OIDs wasn't already cached, we'd do some catalog accesses; and with
some more bad luck such as an ill-timed signal arrival, that could lead to
crashes or Assert failures, as exhibited in bug #8095 from Nachiket Vaidya.
Fortunately, there's no real need to consider the search path for such
commands, so we can just skip the relevant steps when the subject statement
is a TransactionStmt. This is somewhat related to bug #5269, though the
failure happens during initial cached-plan creation rather than
revalidation.
This bug has been there since the plan cache was invented, so back-patch
to all supported branches.
The intent was that being populated would, long term, be just one
of the conditions which could affect whether a matview was
scannable; being populated should be necessary but not always
sufficient to scan the relation. Since only CREATE and REFRESH
currently determine the scannability, names and comments
accidentally conflated these concepts, leading to confusion.
Also add missing locking for the SQL function which allows a
test for scannability, and fix a modularity violatiion.
Per complaints from Tom Lane, although its not clear that these
will satisfy his concerns. Hopefully this will at least better
frame the discussion.
This event takes place just before ddl_command_end, and is fired if and
only if at least one object has been dropped by the command. (For
instance, DROP TABLE IF EXISTS of a table that does not in fact exist
will not lead to such a trigger firing). Commands that drop multiple
objects (such as DROP SCHEMA or DROP OWNED BY) will cause a single event
to fire. Some firings might be surprising, such as
ALTER TABLE DROP COLUMN.
The trigger is fired after the drop has taken place, because that has
been deemed the safest design, to avoid exposing possibly-inconsistent
internal state (system catalogs as well as current transaction) to the
user function code. This means that careful tracking of object
identification is required during the object removal phase.
Like other currently existing events, there is support for tag
filtering.
To support the new event, add a new pg_event_trigger_dropped_objects()
set-returning function, which returns a set of rows comprising the
objects affected by the command. This is to be used within the user
function code, and is mostly modelled after the recently introduced
pg_identify_object() function.
Catalog version bumped due to the new function.
Dimitri Fontaine and Álvaro Herrera
Review by Robert Haas, Tom Lane
This saves several catalog lookups per reference. It's not all that
exciting right now, because we'd managed to minimize the number of places
that need to fetch the data; but the upcoming writable-foreign-tables patch
needs this info in a lot more places.
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
This enables non-backend code, such as pg_xlogdump, to use it easily.
The previous location, in src/backend/catalog/catalog.c, made that
essentially impossible because that file depends on many backend-only
facilities; so this needs to live separately.
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
In the initial implementation of plan caching, we saved the active
search_path when a plan was first cached, then reinstalled that path
anytime we needed to reparse or replan. The idea of that was to try to
reselect the same referenced objects, in somewhat the same way that views
continue to refer to the same objects in the face of schema or name
changes. Of course, that analogy doesn't bear close inspection, since
holding the search_path fixed doesn't cope with object drops or renames.
Moreover sticking with the old path seems to create more surprises than
it avoids. So instead of doing that, consider that the cached plan depends
on search_path, and force reparse/replan if the active search_path is
different than it was when we last saved the plan.
This gets us fairly close to having "transparency" of plan caching, in the
sense that the cached statement acts the same as if you'd just resubmitted
the original query text for another execution. There are still some corner
cases where this fails though: a new object added in the search path
schema(s) might capture a reference in the query text, but we'd not realize
that and force a reparse. We might try to fix that in the future, but for
the moment it looks too expensive and complicated.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
AtEOXact_RelationCache() scanned the entire relation cache at the end of
any transaction that created a new relation or assigned a new relfilenode.
Thus, clients such as pg_restore had an O(N^2) performance problem that
would start to be noticeable after creating 10000 or so tables. Since
typically only a small number of relcache entries need any cleanup, we
can fix this by keeping a small list of their OIDs and doing hash_searches
for them. We fall back to the full-table scan if the list overflows.
Ideally, the maximum list length would be set at the point where N
hash_searches would cost just less than the full-table scan. Some quick
experimentation says that point might be around 50-100; I (tgl)
conservatively set MAX_EOXACT_LIST = 32. For the case that we're worried
about here, which is short single-statement transactions, it's unlikely
there would ever be more than about a dozen list entries anyway; so it's
probably not worth being too tense about the value.
We could avoid the hash_searches by instead keeping the target relcache
entries linked into a list, but that would be noticeably more complicated
and bug-prone because of the need to maintain such a list in the face of
relcache entry drops. Since a relcache entry can only need such cleanup
after a somewhat-heavyweight filesystem operation, trying to save a
hash_search per cleanup doesn't seem very useful anyway --- it's the scan
over all the not-needing-cleanup entries that we wish to avoid here.
Jeff Janes, reviewed and tweaked a bit by Tom Lane
SPI_execute() and related functions create a CachedPlan, execute it once,
and immediately discard it, so that the functionality offered by
plancache.c is of no value in this code path. And performance measurements
show that the extra data copying and invalidation checking done by
plancache.c slows down simple queries by 10% or more compared to 9.1.
However, enough of the SPI code is shared with functions that do need plan
caching that it seems impractical to bypass plancache.c altogether.
Instead, let's invent a variant version of cached plans that preserves
99% of the API but doesn't offer any of the actual functionality, nor the
overhead. This puts SPI_execute() performance back on par, or maybe even
slightly better, than it was before. This change should resolve recent
complaints of performance degradation from Dong Ye, Pavel Stehule, and
others.
By avoiding data copying, this change also reduces the amount of memory
needed to execute many-statement SPI_execute() strings, as for instance in
a recent complaint from Tomas Vondra.
An additional benefit of this change is that multi-statement SPI_execute()
query strings are now processed fully serially, that is we complete
execution of earlier statements before running parse analysis and planning
on following ones. This eliminates a long-standing POLA violation, in that
DDL that affects the behavior of a later statement will now behave as
expected.
Back-patch to 9.2, since this was a performance regression compared to 9.1.
(In 9.2, place the added struct fields so as to avoid changing the offsets
of existing fields.)
Heikki Linnakangas and Tom Lane
Teach RelationCacheInvalidate() to keep rd_newRelfilenodeSubid across rel cache
message overflows, so that behaviour is now fully deterministic.
Noah Misch
During crash recovery, we remove disk files belonging to temporary tables,
but the system catalog entries for such tables are intentionally not
cleaned up right away. Instead, the first backend that uses a temp schema
is expected to clean out any leftover objects therein. This approach
requires that we be careful to ignore leftover temp tables (since any
actual access attempt would fail), *even if their BackendId matches our
session*, if we have not yet established use of the session's corresponding
temp schema. That worked fine in the past, but was broken by commit
debcec7dc3 which incorrectly removed the
rd_islocaltemp relcache flag. Put it back, and undo various changes
that substituted tests like "rel->rd_backend == MyBackendId" for use
of a state-aware flag. Per trouble report from Heikki Linnakangas.
Back-patch to 9.1 where the erroneous change was made. In the back
branches, be careful to add rd_islocaltemp in a spot in the struct that
was alignment padding before, so as not to break existing add-on code.
Commit 8cb53654db, which introduced DROP
INDEX CONCURRENTLY, managed to break CREATE INDEX CONCURRENTLY via a poor
choice of catalog state representation. The pg_index state for an index
that's reached the final pre-drop stage was the same as the state for an
index just created by CREATE INDEX CONCURRENTLY. This meant that the
(necessary) change to make RelationGetIndexList ignore about-to-die indexes
also made it ignore freshly-created indexes; which is catastrophic because
the latter do need to be considered in HOT-safety decisions. Failure to
do so leads to incorrect index entries and subsequently wrong results from
queries depending on the concurrently-created index.
To fix, add an additional boolean column "indislive" to pg_index, so that
the freshly-created and about-to-die states can be distinguished. (This
change obviously is only possible in HEAD. This patch will need to be
back-patched, but in 9.2 we'll use a kluge consisting of overloading the
formerly-impossible state of indisvalid = true and indisready = false.)
In addition, change CREATE/DROP INDEX CONCURRENTLY so that the pg_index
flag changes they make without exclusive lock on the index are made via
heap_inplace_update() rather than a normal transactional update. The
latter is not very safe because moving the pg_index tuple could result in
concurrent SnapshotNow scans finding it twice or not at all, thus possibly
resulting in index corruption. This is a pre-existing bug in CREATE INDEX
CONCURRENTLY, which was copied into the DROP code.
In addition, fix various places in the code that ought to check to make
sure that the indexes they are manipulating are valid and/or ready as
appropriate. These represent bugs that have existed since 8.2, since
a failed CREATE INDEX CONCURRENTLY could leave a corrupt or invalid
index behind, and we ought not try to do anything that might fail with
such an index.
Also fix RelationReloadIndexInfo to ensure it copies all the pg_index
columns that are allowed to change after initial creation. Previously we
could have been left with stale values of some fields in an index relcache
entry. It's not clear whether this actually had any user-visible
consequences, but it's at least a bug waiting to happen.
In addition, do some code and docs review for DROP INDEX CONCURRENTLY;
some cosmetic code cleanup but mostly addition and revision of comments.
This will need to be back-patched, but in a noticeably different form,
so I'm committing it to HEAD before working on the back-patch.
Problem reported by Amit Kapila, diagnosis by Pavan Deolassee,
fix by Tom Lane and Andres Freund.
Files opened with BasicOpenFile or PathNameOpenFile are not automatically
cleaned up on error. That puts unnecessary burden on callers that only want
to keep the file open for a short time. There is AllocateFile, but that
returns a buffered FILE * stream, which in many cases is not the nicest API
to work with. So add function called OpenTransientFile, which returns a
unbuffered fd that's cleaned up like the FILE* returned by AllocateFile().
This plugs a few rare fd leaks in error cases:
1. copy_file() - fixed by by using OpenTransientFile instead of BasicOpenFile
2. XLogFileInit() - fixed by adding close() calls to the error cases. Can't
use OpenTransientFile here because the fd is supposed to persist over
transaction boundaries.
3. lo_import/lo_export - fixed by using OpenTransientFile instead of
PathNameOpenFile.
In addition to plugging those leaks, this replaces many BasicOpenFile() calls
with OpenTransientFile() that were not leaking, because the code meticulously
closed the file on error. That wasn't strictly necessary, but IMHO it's good
for robustness.
The same leaks exist in older versions, but given the rarity of the issues,
I'm not backpatching this. Not yet, anyway - it might be good to backpatch
later, after this mechanism has had some more testing in master branch.
Remove useless duplicate initialization of bucket headers, don't use a
dlist_mutable_iter in a performance-critical path that doesn't need it,
make some other cosmetic changes for consistency's sake.
dlist_delete, dlist_insert_after, dlist_insert_before, slist_insert_after
do not need access to the list header, and indeed insisting on that negates
one of the main advantages of a doubly-linked list.
In consequence, revert addition of "cache_bucket" field to CatCTup.
Provide a common implementation of embedded singly-linked and
doubly-linked lists. "Embedded" in the sense that the nodes'
next/previous pointers exist within some larger struct; this design
choice reduces memory allocation overhead.
Most of the implementation uses inlineable functions (where supported),
for performance.
Some existing uses of both types of lists have been converted to the new
code, for demonstration purposes. Other uses can (and probably will) be
converted in the future. Since dllist.c is unused after this conversion,
it has been removed.
Author: Andres Freund
Some tweaks by me
Reviewed by Tom Lane, Peter Geoghegan
This change ensures that the planner will see implicit and explicit casts
as equivalent for all purposes, except in the minority of cases where
there's actually a semantic difference (as reflected by having a 3-argument
cast function). In particular, this fixes cases where the EquivalenceClass
machinery failed to consider two references to a varchar column as
equivalent if one was implicitly cast to text but the other was explicitly
cast to text, as seen in bug #7598 from Vaclav Juza. We have had similar
bugs before in other parts of the planner, so I think it's time to fix this
problem at the core instead of continuing to band-aid around it.
Remove set_coercionform_dontcare(), which represents the band-aid
previously in use for allowing matching of index and constraint expressions
with inconsistent cast labeling. (We can probably get rid of
COERCE_DONTCARE altogether, but I don't think removing that enum value in
back branches would be wise; it's possible there's third party code
referring to it.)
Back-patch to 9.2. We could go back further, and might want to once this
has been tested more; but for the moment I won't risk destabilizing plan
choices in long-since-stable branches.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Commit 3855968f32 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
When (re) loading the typcache comparison cache for an enum type's values,
use an up-to-date MVCC snapshot, not the transaction's existing snapshot.
This avoids problems if we encounter an enum OID that was created since our
transaction started. Per report from Andres Freund and diagnosis by Robert
Haas.
To ensure this is safe even if enum comparison manages to get invoked
before we've set a transaction snapshot, tweak GetLatestSnapshot to
redirect to GetTransactionSnapshot instead of throwing error when
FirstSnapshotSet is false. The existing uses of GetLatestSnapshot (in
ri_triggers.c) don't care since they couldn't be invoked except in a
transaction that's already done some work --- but it seems just conceivable
that this might not be true of enums, especially if we ever choose to use
enums in system catalogs.
Note that the comparable coding in enum_endpoint and enum_range_internal
remains GetTransactionSnapshot; this is perhaps debatable, but if we
changed it those functions would have to be marked volatile, which doesn't
seem attractive.
Back-patch to 9.1 where ALTER TYPE ADD VALUE was added.
By my count there are 18 callers of CacheRegisterSyscacheCallback in the
core code in HEAD, so we are potentially leaving as few as 2 slots for any
add-on code to use (though possibly not all these callers would actually
activate in any particular session). That doesn't seem like a lot of
headroom, so let's pump it up a little.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
This restores the pre-9.0 situation that it's possible to add new indexes
on pg_class and other mapped-but-not-shared catalogs, so long as you broke
the glass and flipped the big red Dont-Touch-Me switch. As before, there
are a lot of gotchas, and you'd have to be pretty desperate to try this
on a production database; but there doesn't seem to be a reason for
relmapper.c to be preventing such things all by itself. Per
experimentation with a case suggested by Cody Cutrer.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
Now that cache invalidation callbacks get only a hash value, and not a
tuple TID (per commits 632ae6829f and
b5282aa893), the only way they can restrict
what they invalidate is to know what the hash values mean. setrefs.c was
doing this via a hard-wired assumption but that seems pretty grotty, and
it'll only get worse as more cases come up. So let's expose a calculation
function that takes the same parameters as SearchSysCache. Per complaint
from Marko Kreen.
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
When default_text_search_config, default_tablespace, or temp_tablespaces
setting is set per-user or per-database, with an "ALTER USER/DATABASE SET
..." statement, don't throw an error if the text search configuration or
tablespace does not exist. In case of text search configuration, even if
it doesn't exist in the current database, it might exist in another
database, where the setting is intended to have its effect. This behavior
is now the same as search_path's.
Tablespaces are cluster-wide, so the same argument doesn't hold for
tablespaces, but there's a problem with pg_dumpall: it dumps "ALTER USER
SET ..." statements before the "CREATE TABLESPACE" statements. Arguably
that's pg_dumpall's fault - it should dump the statements in such an order
that the tablespace is created first and then the "ALTER USER SET
default_tablespace ..." statements after that - but it seems better to be
consistent with search_path and default_text_search_config anyway. Besides,
you could still create a dump that throws an error, by creating the
tablespace, running "ALTER USER SET default_tablespace", then dropping the
tablespace and running pg_dumpall on that.
Backpatch to all supported versions.
Normally, accessing variable-length members of catalog structures past
the first one doesn't work at all. Here, it happened to work because
indnatts was checked to be 1, and so the defined FormData_pg_index
layout, using int2vector[1] and oidvector[1] for variable-length
arrays, happened to match the actual memory layout. But it's a very
fragile assumption, and it's not in a performance-critical path, so
code it properly using heap_getattr() instead.
bug analysis by Tom Lane
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
Since record[] uses array_in, it needs to have its element type passed
as typioparam. In HEAD and 9.1, this fix essentially reverts commit
9bc933b212, which was a hack that is no
longer needed since domains don't set their typelem anymore. Before
that, adjust the logic so that only domains are excluded from being
treated like arrays, rather than assuming that only base types should
be included. Add a regression test to demonstrate the need for this.
Per report from Maxim Boguk.
Back-patch to 8.4, where type record[] was added.
Move the responsibility for caching specialized information about range
types into the type cache, so that the catalog lookups only have to occur
once per session. Rearrange APIs a bit so that fn_extra caching is
actually effective in the GiST support code. (Use of OidFunctionCallN is
bad enough for performance in itself, but it also prevents the function
from exploiting fn_extra caching.)
The range I/O functions are still not very bright about caching repeated
lookups, but that seems like material for a separate patch.
Also, avoid unnecessary use of memcpy to fetch/store the range type OID and
flags, and don't use the full range_deserialize machinery when all we need
to see is the flags value.
Also fix API error in range_gist_penalty --- it was failing to set *penalty
for any case involving an empty range.
If a tuple in a syscache contains an out-of-line toasted field, and we
try to fetch that field shortly after some other transaction has committed
an update or deletion of the tuple, there is a race condition: vacuum
could come along and remove the toast tuples before we can fetch them.
This leads to transient failures like "missing chunk number 0 for toast
value NNNNN in pg_toast_2619", as seen in recent reports from Andrew
Hammond and Tim Uckun.
The design idea of syscache is that access to stale syscache entries
should be prevented by relation-level locks, but that fails for at least
two cases where toasted fields are possible: ANALYZE updates pg_statistic
rows without locking out sessions that might want to plan queries on the
same table, and CREATE OR REPLACE FUNCTION updates pg_proc rows without
any meaningful lock at all.
The least risky fix seems to be an idea that Heikki suggested when we
were dealing with a related problem back in August: forcibly detoast any
out-of-line fields before putting a tuple into syscache in the first place.
This avoids the problem because at the time we fetch the parent tuple from
the catalog, we should be holding an MVCC snapshot that will prevent
removal of the toast tuples, even if the parent tuple is outdated
immediately after we fetch it. (Note: I'm not convinced that this
statement holds true at every instant where we could be fetching a syscache
entry at all, but it does appear to hold true at the times where we could
fetch an entry that could have a toasted field. We will need to be a bit
wary of adding toast tables to low-level catalogs that don't have them
already.) An additional benefit is that subsequent uses of the syscache
entry should be faster, since they won't have to detoast the field.
Back-patch to all supported versions. The problem is significantly harder
to reproduce in pre-9.0 releases, because of their willingness to flush
every entry in a syscache whenever the underlying catalog is vacuumed
(cf CatalogCacheFlushRelation); but there is still a window for trouble.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
The code path that tried a generic plan, didn't like it, and then made a
custom plan was mistakenly passing the same copy of the query_list to the
planner both times. This doesn't work too well for nontrivial queries,
since the planner tends to scribble on its input. Diagnosis and fix by
Yamamoto Takashi.
I had copied-and-pasted a claim that we couldn't reach this point when
dealing with utility statements, but that was a leftover from when the
caller was required to supply a plan to start with. We now will go
through here at least once when handling a utility statement, so it
seems worth a check to see whether a snapshot is actually needed.
(Note that analyze_requires_snapshot is quite a cheap test.)
Per suggestion from Yamamoto Takashi. I don't think I believe that this
resolves his reported assertion failure; but it's worth changing anyway,
just to save a cycle or two.
The regression tests were failing with CLOBBER_CACHE_ALWAYS enabled,
as reported by buildfarm member jaguar. There was an Assert in
BuildCachedPlan that asserted that the CachedPlanSource hadn't been
invalidated since we called RevalidateCachedQuery, which in theory can't
happen because we are holding locks on all the relevant database objects.
However, CLOBBER_CACHE_ALWAYS generates a false positive by making an
invalidation happen anyway; and on reflection, that could also occur as a
result of a badly-timed sinval reset due to queue overflow. We could just
remove the Assert and forge ahead with the not-really-stale querytree, but
it seems safer to do another RevalidateCachedQuery call just to make real
sure everything's OK.
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
