As of Windows 10 version 1803, Unix-domain sockets are supported on
Windows. But it's not automatically detected by configure because it
looks for struct sockaddr_un and Windows doesn't define that. So we
just make our own definition on Windows and override the configure
result.
Set DEFAULT_PGSOCKET_DIR to empty on Windows so by default no
Unix-domain socket is used, because there is no good standard
location.
In pg_upgrade, we have to do some extra tweaking to preserve the
existing behavior of not using Unix-domain sockets on Windows. Adding
support would be desirable, but it needs further work, in particular a
way to select whether to use Unix-domain sockets from the command-line
or with a run-time test.
The pg_upgrade test script needs a fix. The previous code passed
"localhost" to postgres -k, which only happened to work because
Windows used to ignore the -k argument value altogether. We instead
need to pass an empty string to get the desired effect.
The test suites will continue to not use Unix-domain sockets on
Windows. This requires a small tweak in pg_regress.c. The TAP tests
don't need to be changed because they decide by the operating system
rather than HAVE_UNIX_SOCKETS.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/54bde68c-d134-4eb8-5bd3-8af33b72a010@2ndquadrant.com
It was for unclear reasons defined in a separate location, which makes
it more cumbersome to override for testing, and it also did not have
any prominent documentation. Move to pg_config_manual.h, where
similar things are already collected.
The previous definition on the command-line had the effect of defining
it to the value 1, but now that we don't need that anymore we just
define it to empty, to simplify manual editing a bit.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/b7053ba8-b008-5335-31de-2fe4fe41ef0f%402ndquadrant.com
If pkg-config is installed and knows about libxml2, use its information
rather than asking xml2-config. Otherwise proceed as before. This
patch allows "configure --with-libxml" to succeed on platforms that
have pkg-config but not xml2-config, which is likely to soon become
a typical situation.
The old mechanism can be forced by setting XML2_CONFIG explicitly
(hence, build processes that were already doing so will certainly
not need adjustment). Also, it's now possible to set XML2_CFLAGS
and XML2_LIBS explicitly to override both programs.
There is a small risk of this breaking existing build processes,
if there are multiple libxml2 installations on the machine and
pkg-config disagrees with xml2-config about which to use. The
only case where that seems really likely is if a builder has tried
to select a non-default xml2-config by putting it early in his PATH
rather than setting XML2_CONFIG. Plan to warn against that in the
minor release notes.
Back-patch to v10; before that we had no pkg-config infrastructure,
and it doesn't seem worth adding it for this.
Hugh McMaster and Tom Lane; Peter Eisentraut also made an earlier
attempt at this, from which I lifted most of the docs changes.
Discussion: https://postgr.es/m/CAN9BcdvfUwc9Yx5015bLH2TOiQ-M+t_NADBSPhMF7dZ=pLa_iw@mail.gmail.com
This removes another relic from the old nmake-based Windows build.
version_stamp.pl put version number information into win32ver.rc. But
win32ver.rc already gets other version number information from the
preprocessor at build time, so it would make more sense if all version
number information would be handled in the same way and we don't have
two places that do it.
What we need for this is having the major version number and the minor
version number as separate integer symbols. Both configure and
Solution.pm already have that logic, because they compute
PG_VERSION_NUM. So we just keep all the logic there now. Put the
minor version number into a new symbol PG_MINORVERSION_NUM. Also, add
a symbol PG_MAJORVERSION_NUM, which is a number, alongside the
existing PG_MAJORVERSION, which is a string.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1ee46ac4-a9b2-4531-bf54-5ec2e374634d@2ndquadrant.com
These compiler features are required by C99, so remove the configure
probes for them.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm; it's been required by POSIX since SUSv2. So remove the
configure probe and tests of HAVE_WCHAR_H.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
These are required by POSIX since SUSv2, and no live platforms fail
to provide them. On Windows, utime() exists and we bring our own
<utime.h>, so we're good there too. So remove the configure probes
and ad-hoc substitute code. We don't need to check for utimes()
anymore either, since that was only used as a substitute.
In passing, make the Windows build include <sys/utime.h> only where
we need it, not everywhere.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this since _MSC_VER >= 1200, and so do all other live
platforms according to the buildfarm, so remove the configure probe
and src/port/ substitution.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and c.h's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and float.c's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
This also lets us get rid of some configure probes that existed only
to support src/port/isinf.c. I kept the port.h hack to force using
__builtin_isinf() on clang, though.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
Keep the probe that detects whether _LARGEFILE_SOURCE has to be
defined to get that, though ... that seems to be still relevant in
some places.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
stdint.h belongs to the compiler (as opposed to inttypes.h), so by
requiring a C99 compiler we can also require stdint.h
unconditionally. Remove configure checks and other workarounds for
it.
This also removes a few steps in the required portability adjustments
to the imported time zone code, which can be applied on the next
import.
When using GCC on a platform that is otherwise pre-C99, this will now
require at least GCC 4.5, which is the first release that supplied a
standard-conforming stdint.h if the native platform didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/5d398bbb-262a-5fed-d839-d0e5cff3c0d7%402ndquadrant.com
The previous system had configure put the value into the makefiles and
then have the makefiles pass them to the build of pg_config. That was
put in place when pg_config was a shell script. We can simplify that
by having configure put the value into pg_config.h directly. This
also makes the standard build system match how the MSVC build system
already does it.
Discussion: https://www.postgresql.org/message-id/flat/6e457870-cef5-5f1d-b57c-fc89cfb8a788%402ndquadrant.com
Use kevent(2) to wait for events on the BSD family of operating
systems and macOS. This is similar to the epoll(2) support added
for Linux by commit 98a64d0bd.
Author: Thomas Munro
Reviewed-by: Andres Freund, Marko Tiikkaja, Tom Lane
Tested-by: Mateusz Guzik, Matteo Beccati, Keith Fiske, Heikki Linnakangas, Michael Paquier, Peter Eisentraut, Rui DeSousa, Tom Lane, Mark Wong
Discussion: https://postgr.es/m/CAEepm%3D37oF84-iXDTQ9MrGjENwVGds%2B5zTr38ca73kWR7ez_tA%40mail.gmail.com
I had supposed that all versions of Readline that have filename
quoting hooks also have the rl_completion_suppress_quote variable.
But it seems OpenBSD managed to find a version someplace that does
not, so we'll have to expend a separate configure probe for that.
(Light testing suggests that this version also lacks the bugs that
make it necessary to frob that variable. Hooray!)
Per buildfarm.
The Readline library contains a fair amount of knowledge about how to
tab-complete filenames, but it turns out that that doesn't work too well
unless we follow its expectation that we use its filename quoting hooks
to quote and de-quote filenames. We were trying to do such quote handling
within complete_from_files(), and that's still what we have to do if we're
using libedit, which lacks those hooks. But for Readline, it works a lot
better if we tell Readline that single-quote is a quoting character and
then provide hooks that know the details of the quoting rules for SQL
and psql meta-commands.
Hence, resurrect the quoting hook functions that existed in the original
version of tab-complete.c (and were disabled by commit f6689a328 because
they "didn't work so well yet"), and whack on them until they do seem to
work well.
Notably, this fixes bug #16059 from Steven Winfield, who pointed out
that the previous coding would strip quote marks from filenames in SQL
COPY commands, even though they're syntactically necessary there.
Now, we not only don't do that, but we'll add a quote mark when you
tab-complete, even if you didn't type one.
Getting this to work across a range of libedit versions (and, to a
lesser extent, libreadline versions) was depressingly difficult.
It will be interesting to see whether the new regression test cases
pass everywhere in the buildfarm.
Some future patch might try to handle quoted SQL identifiers with
similar explicit quoting/dequoting logic, but that's for another day.
Patch by me, reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/16059-8836946734c02b84@postgresql.org
Supporting very old Python versions is a maintenance burden,
especially with the several variant test files to maintain for Python
<2.6.
Since we have dropped support for older OpenSSL versions in
7b283d0e1d, RHEL 5 is now effectively
desupported, and that was also the only mainstream operating system
still using Python versions before 2.6, so it's a good time to drop
those as well.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/98b69261-298c-13d2-f34d-836fd9c29b21%402ndquadrant.com
Up to now, psql's tab-complete.c has had exactly no regression test
coverage. This patch is an experimental attempt to add some.
This needs Perl's IO::Pty module, which isn't installed everywhere,
so the test script just skips all tests if that's not present.
There may be other portability gotchas too, so I await buildfarm
results with interest.
So far this just covers a few very basic keyword-completion and
query-driven-completion scenarios, which should be enough to let us
get a feel for whether this is practical at all from a portability
standpoint. If it is, there's lots more that can be done.
Discussion: https://postgr.es/m/10967.1577562752@sss.pgh.pa.us
The getpeereid() uses have so far been protected by HAVE_UNIX_SOCKETS,
so they didn't ever care about Windows support. But in anticipation
of Unix-domain socket support on Windows, that needs to be handled
differently.
Windows doesn't support getpeereid() at this time, so we use the
existing not-supported code path. We let configure do its usual thing
of picking up the replacement from libpgport, instead of the custom
overrides that it was doing before.
But then Windows doesn't have struct passwd, so this patch sprinkles
some additional #ifdef WIN32 around to make it work. This is similar
to existing code that deals with this issue.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/5974caea-1267-7708-40f2-6009a9d653b0@2ndquadrant.com
This function is supported down to OpenSSL 0.9.8, which is the oldest
version supported since 593d4e4 (from Postgres 10 onwards), and is used
since e3bdb2d (from 11 onwards). It is defined as a macro from OpenSSL
0.9.8 to 1.0.2, and as a function in 1.1.0 and newer versions. However,
the configure check present is only adapted for functions. So, even if
the code would be able to compile, configure fails to detect the macro,
causing it to be ignored when compiling the code with OpenSSL from 0.9.8
to 1.0.2.
The code needs a configure check as per a364dfa, which has fixed a
compilation issue with a past version of LibreSSL in NetBSD 5.1. On
HEAD, just remove the configure check as the last release of NetBSD 5 is
from 2014 (and we have no more buildfarm members for it). In 11 and 12,
improve the configure logic so as both macros and functions are
correctly detected. This makes NetBSD 5 still work on already-released
branches, but not for 13 onwards.
The patch for HEAD is from me, and Daniel has written the version to use
for the back-branches.
Author: Michael Paquier, Daniel Gustaffson
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20191205083252.GE5064@paquier.xyz
Discussion: https://postgr.es/m/98F7F99E-1129-41D8-B86B-FE3B1E286881@yesql.se
Backpatch-through: 11
This build option was once useful to maintain compatibility with
version-0 functions, but those are no longer supported, so this option
is no longer useful for end users. We keep the option available to
developers in pg_config_manual.h so that it is easy to test the
pass-by-reference code paths without having to fire up a 32-bit
machine.
Discussion: https://www.postgresql.org/message-id/flat/f3e1e576-2749-bbd7-2d57-3f9dcf75255a@2ndquadrant.com
This completes the task begun in commit 1408d5d86, to synchronize
ECPG's exported definitions with the definition of bool used by
c.h (and, therefore, the one actually in use in the ECPG library).
On practically all modern platforms, ecpglib.h will now just
include <stdbool.h>, which should surprise nobody anymore.
That removes a header-inclusion-order hazard for ECPG clients,
who previously might get build failures or unexpected behavior
depending on whether they'd included <stdbool.h> themselves,
and if so, whether before or after ecpglib.h.
On platforms where sizeof(_Bool) is not 1 (only old PPC-based
Mac systems, as far as I know), things are still messy, as
inclusion of <stdbool.h> could still break ECPG client code.
There doesn't seem to be any clean fix for that, and given the
probably-negligible population of users who would care anymore,
it's not clear we should go far out of our way to cope with it.
This change at least fixes some header-inclusion-order hazards
for our own code, since c.h and ecpglib.h previously disagreed
on whether bool should be char or unsigned char.
To implement this with minimal invasion of ECPG client namespace,
move the choice of whether to rely on <stdbool.h> into configure,
and have it export a configuration symbol PG_USE_STDBOOL.
ecpglib.h no longer exports definitions for TRUE and FALSE,
only their lowercase brethren. We could undo that if we get
push-back about it.
Ideally we'd back-patch this as far as v11, which is where c.h
started to rely on <stdbool.h>. But the odds of creating problems
for formerly-working ECPG client code seem about as large as the
odds of fixing any non-working cases, so we'll just do this in HEAD.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
Add some support for automatically showing backtraces in certain error
situations in the server. Backtraces are shown on assertion failure;
also, a new setting backtrace_functions can be set to a list of C
function names, and all ereport()s and elog()s from the mentioned
functions will have backtraces generated. Finally, the function
errbacktrace() can be manually added to an ereport() call to generate a
backtrace for that call.
Authors: Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m//5f48cb47-bf1e-05b6-7aae-3bf2cd01586d@2ndquadrant.com
Discussion: https://postgr.es/m/CAMsr+YGL+yfWE=JvbUbnpWtrRZNey7hJ07+zT4bYJdVp4Szdrg@mail.gmail.com
On recent Red Hat platforms (at least RHEL 8 and Fedora 30, maybe older),
configure's probe for libperl failed if the user forces CFLAGS to be -O0.
This is because some code in perl's inline.h fails to be optimized away
at -O0, and said code doesn't work if compiled without -fPIC.
To fix, add CFLAGS_SL to the compile flags used during the libperl probe.
This is a better simulation of the way that plperl is built, anyway,
so it might forestall other issues in future.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
since people might want to build older branches on these platforms.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
Move the platform-dependent logic that sets CFLAGS_SL from
src/makefiles/Makefile.foo to src/template/foo, so that the value
is determined at configure time and thus is available while running
configure's tests.
On a couple of platforms this might save a few microseconds of build
time by eliminating a test that make otherwise has to do over and over.
Otherwise it's pretty much a wash for build purposes; in particular,
this makes no difference to anyone who might be overriding CFLAGS_SL
via a make option.
This patch in itself does nothing with the value and thus should not
change any behavior, though you'll probably have to re-run configure
to get a correctly updated Makefile.global. We'll use the new
configure variable in a follow-on patch.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
because the follow-on patch is a portability bug fix.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
This reverts commit e7ff59686e. It
defined pg_atomic_fetch_add_u32_impl() without defining
pg_atomic_compare_exchange_u32_impl(), which is incompatible with
src/include/port/atomics/fallback.h. Per buildfarm member prairiedog.
Discussion: https://postgr.es/m/7517.1568470247@sss.pgh.pa.us
Use the explicit_bzero() function in places where it is important that
security information such as passwords is cleared from memory. There
might be other places where it could be useful; this is just an
initial collection.
For platforms that don't have explicit_bzero(), provide various
fallback implementations. (explicit_bzero() itself isn't standard,
but as Linux/glibc, FreeBSD, and OpenBSD have it, it's the most common
spelling, so it makes sense to make that the invocation point.)
Discussion: https://www.postgresql.org/message-id/flat/42d26bde-5d5b-c90d-87ae-6cab875f73be%402ndquadrant.com
fe0a0b5 has removed the last use of this routine from pgcrypto, leading
to a useless symbol definition and an extra configure check.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/20190626142544.GN1714@paquier.xyz
Currently only frogmouth in the buildfarm uses the 32bit params, and
it's not able to build past release 10, so put those last, saving
substantial configure time on more modern systems. Even if we get a
modern 32 bit Windows system at some stage we should probably prefer the
64 bit interface here these days.
Test for the compiler builtins __builtin_clz, __builtin_ctz, and
__builtin_popcount, and make use of these in preference to
handwritten C code if they're available. Create src/port
infrastructure for "leftmost one", "rightmost one", and "popcount"
so as to centralize these decisions.
On x86_64, __builtin_popcount generally won't make use of the POPCNT
opcode because that's not universally supported yet. Provide code
that checks CPUID and then calls POPCNT via asm() if available.
This requires indirecting through a function pointer, which is
an annoying amount of overhead for a one-instruction operation,
but it's probably not worth working harder than this for our
current use-cases.
I'm not sure we've found all the existing places that could profit
from this new infrastructure; but we at least touched all the
ones that used copied-and-pasted versions of the bitmapset.c code,
and got rid of multiple copies of the associated constant arrays.
While at it, replace c-compiler.m4's one-per-builtin-function
macros with a single one that can handle all the cases we need
to worry about so far. Also, because I'm paranoid, make those
checks into AC_LINK checks rather than just AC_COMPILE; the
former coding failed to verify that libgcc has support for the
builtin, in cases where it's not inline code.
David Rowley, Thomas Munro, Alvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/CAKJS1f9WTAGG1tPeJnD18hiQW5gAk59fQ6WK-vfdAKEHyRg2RA@mail.gmail.com
Deal with silent-underflow errors in float4 for cygwin and mingw by
using our strtof() wrapper; deal with misrounding errors by adding
them to the resultmap. Some slight reorganization of declarations was
done to avoid duplicating material between cygwin.h and win32_port.h.
While here, remove from the resultmap all references to
float8-small-is-zero; inspection of cygwin output suggests it's no
longer required there, and the freebsd/netbsd/openbsd entries should
no longer be necessary (these date back to c. 2000). This commit
doesn't remove the file itself nor the documentation references for
it; that will happen in a subsequent commit if all goes well.
This reverts commits fc6c72747a, 109de05cbb, d0b4663c23 and
711bab1e4d.
Somebody will have to try harder before submitting this patch again.
I've spent entirely too much time on it already, and the #ifdef maze yet
to be written in order for it to build at all got on my nerves. The
amount of work needed to get a platform-specific performance improvement
that's barely above the noise level is not worth it.
Split out these new functions in three parts: one in a new file that
uses the compiler builtin and gets compiled with the -mpopcnt compiler
option if it exists; another one that uses the compiler builtin but not
the compiler option; and finally the fallback with open-coded
algorithms.
Split out the configure logic: in the original commit, it was selecting
to use the -mpopcnt compiler switch together with deciding whether to
use the compiler builtin, but those two things are really separate.
Split them out. Also, expose whether the builtin exists to
Makefile.global, so that src/port's Makefile can decide whether to
compile the hw-optimized file.
Remove CPUID test for CTZ/CLZ. Make pg_{right,left}most_ones use either
the compiler intrinsic or open-coded algo; trying to use the
HW-optimized version is a waste of time. Make them static inline
functions.
Discussion: https://postgr.es/m/20190213221719.GA15976@alvherre.pgsql
We were using uint64 function arguments as "long int" arguments to
compiler builtins, which fails on machines where long ints are 32 bits:
the upper half of the uint64 was being ignored. Fix by using the "ll"
builtin variants instead, which on those machines take 64 bit arguments.
Also, remove configure tests for __builtin_popcountl() (as well as
"long" variants for ctz and clz): the theory here is that any compiler
version will provide all widths or none, so one test suffices. Were
this theory to be wrong, we'd have to add tests for
__builtin_popcountll() and friends, which would be tedious.
Per failures in buildfarm member lapwing and ensuing discussion.
These opcodes have been around in the AMD world since 2007, and 2008 in
the case of intel. They're supported in GCC and Clang via some __builtin
macros. The opcodes may be unavailable during runtime, in which case we
fall back on a C-based implementation of the code. In order to get the
POPCNT instruction we must pass the -mpopcnt option to the compiler. We
do this only for the pg_bitutils.c file.
David Rowley (with fragments taken from a patch by Thomas Munro)
Discussion: https://postgr.es/m/CAKJS1f9WTAGG1tPeJnD18hiQW5gAk59fQ6WK-vfdAKEHyRg2RA@mail.gmail.com
Previously, floating-point output was done by rounding to a specific
decimal precision; by default, to 6 or 15 decimal digits (losing
information) or as requested using extra_float_digits. Drivers that
wanted exact float values, and applications like pg_dump that must
preserve values exactly, set extra_float_digits=3 (or sometimes 2 for
historical reasons, though this isn't enough for float4).
Unfortunately, decimal rounded output is slow enough to become a
noticable bottleneck when dealing with large result sets or COPY of
large tables when many floating-point values are involved.
Floating-point output can be done much faster when the output is not
rounded to a specific decimal length, but rather is chosen as the
shortest decimal representation that is closer to the original float
value than to any other value representable in the same precision. The
recently published Ryu algorithm by Ulf Adams is both relatively
simple and remarkably fast.
Accordingly, change float4out/float8out to output shortest decimal
representations if extra_float_digits is greater than 0, and make that
the new default. Applications that need rounded output can set
extra_float_digits back to 0 or below, and take the resulting
performance hit.
We make one concession to portability for systems with buggy
floating-point input: we do not output decimal values that fall
exactly halfway between adjacent representable binary values (which
would rely on the reader doing round-to-nearest-even correctly). This
is known to be a problem at least for VS2013 on Windows.
Our version of the Ryu code originates from
https://github.com/ulfjack/ryu/ at commit c9c3fb1979, but with the
following (significant) modifications:
- Output format is changed to use fixed-point notation for small
exponents, as printf would, and also to use lowercase 'e', a
minimum of 2 exponent digits, and a mandatory sign on the exponent,
to keep the formatting as close as possible to previous output.
- The output of exact midpoint values is disabled as noted above.
- The integer fast-path code is changed somewhat (since we have
fixed-point output and the upstream did not).
- Our project style has been largely applied to the code with the
exception of C99 declaration-after-statement, which has been
retained as an exception to our present policy.
- Most of upstream's debugging and conditionals are removed, and we
use our own configure tests to determine things like uint128
availability.
Changing the float output format obviously affects a number of
regression tests. This patch uses an explicit setting of
extra_float_digits=0 for test output that is not expected to be
exactly reproducible (e.g. due to numerical instability or differing
algorithms for transcendental functions).
Conversions from floats to numeric are unchanged by this patch. These
may appear in index expressions and it is not yet clear whether any
change should be made, so that can be left for another day.
This patch assumes that the only supported floating point format is
now IEEE format, and the documentation is updated to reflect that.
Code by me, adapting the work of Ulf Adams and other contributors.
References:
https://dl.acm.org/citation.cfm?id=3192369
Reviewed-by: Tom Lane, Andres Freund, Donald Dong
Discussion: https://postgr.es/m/87r2el1bx6.fsf@news-spur.riddles.org.uk
Using strtod() creates a double-rounding problem; the input decimal
value is first rounded to the nearest double; rounding that to the
nearest float may then give an incorrect result.
An example is that 7.038531e-26 when input via strtod and then rounded
to float4 gives 0xAE43FEp-107 instead of the correct 0xAE43FDp-107.
Values output by earlier PG versions with extra_float_digits=3 should
all be read in with the same values as previously. However, values
supplied by other software using shortest representations could be
mis-read.
On platforms that lack a strtof() entirely, we fall back to the old
incorrect rounding behavior. (As strtof() is required by C99, such
platforms are considered of primarily historical interest.) On VS2013,
some workarounds are used to get correct error handling.
The regression tests now test for the correct input values, so
platforms that lack strtof() will need resultmap entries. An entry for
HP-UX 10 is included (more may be needed).
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/871s5emitx.fsf@news-spur.riddles.org.uk
Discussion: https://postgr.es/m/87d0owlqpv.fsf@news-spur.riddles.org.uk
The comment marker "#" is copied to the output, so it's only
appropriate for comments that make sense in the shell output. For
comments about the Autoconf language, "dnl" should be used.
While Windows (allegedly) has _configthreadlocale() pretty far back,
it seems MinGW didn't acquire support for that till more recently.
Fortunately, we can use an autoconf probe on that toolchain,
instead of guessing whether it's there. (Hm, I wonder whether Cygwin
will need this also.)
Per buildfarm.
Discussion: https://postgr.es/m/20190121193512.tdmcnic2yjxlufaw@alap3.anarazel.de
ecpglib attempts to force the LC_NUMERIC locale to "C" while reading
server output, to avoid problems with strtod() and related functions.
Historically it's just issued setlocale() calls to do that, but that
has major problems if we're in a threaded application. setlocale()
itself is not required by POSIX to be thread-safe (and indeed is not,
on recent OpenBSD). Moreover, its effects are process-wide, so that
we could cause unexpected results in other threads, or another thread
could change our setting.
On platforms having uselocale(), which is required by POSIX:2008,
we can avoid these problems by using uselocale() instead. Windows
goes its own way as usual, but we can make it safe by using
_configthreadlocale(). Platforms having neither continue to use the
old code, but that should be pretty much nobody among current systems.
This should get back-patched, but let's see what the buildfarm
thinks of it first.
Michael Meskes and Tom Lane; thanks also to Takayuki Tsunakawa.
Discussion: https://postgr.es/m/31420.1547783697@sss.pgh.pa.us
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
Recent OpenBSD (at least 5.9 and up) has a version of getopt(3)
that will not cope with the "-:" spec we use to accept double-dash
options in postgres.c and postmaster.c. Admittedly, that's a hack
because POSIX only requires getopt() to allow alphanumeric option
characters. I have no desire to find another way, however, so
let's just do what we were already doing on Solaris: force use
of our own src/port/getopt.c implementation.
In passing, improve some of the comments around said implementation.
Per buildfarm and local testing. Back-patch to all supported branches.
Discussion: https://postgr.es/m/30197.1547835700@sss.pgh.pa.us
AC_ARG_VAR is necessary if an environment variable influences a
configure result that is then used by other tests that are cached.
With AC_ARG_VAR, a change in the variable is detected on subsequent
configure runs and the user is then advised to remove the cache.
This adds AC_ARG_VAR calls for: MSGFMT, PERL, PYTHON, TCLSH, XML2_CONFIG
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/30672.1546816567@sss.pgh.pa.us
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
It appears that all platforms that have sys_siglist[] also have
strsignal(), making that fallback case in pg_strsignal() dead code.
Getting rid of it allows dropping a configure test, which seems worth
more than providing textual signal descriptions on whatever platforms
might still hypothetically have use for the fallback case.
Discussion: https://postgr.es/m/25758.1544983503@sss.pgh.pa.us
At least as far back as the 2008 spec, POSIX has defined strsignal(3)
for looking up descriptive strings for signal numbers. We hadn't gotten
the word though, and were still using the crufty old sys_siglist array,
which is in no standard even though most Unixen provide it.
Aside from not being formally standards-compliant, this was just plain
ugly because it involved #ifdef's at every place using the code.
To eliminate the #ifdef's, create a portability function pg_strsignal,
which wraps strsignal(3) if available and otherwise falls back to
sys_siglist[] if available. The set of Unixen with neither API is
probably empty these days, but on any platform with neither, you'll
just get "unrecognized signal". All extant callers print the numeric
signal number too, so no need to work harder than that.
Along the way, upgrade pg_basebackup's child-error-exit reporting
to match the rest of the system.
Discussion: https://postgr.es/m/25758.1544983503@sss.pgh.pa.us
This change doesn't fix any bugs that we've heard about, but it seems
like a good idea on general principles to track upstream occasionally.
Discussion: https://postgr.es/m/3320.1542647565@sss.pgh.pa.us
Calling AC_CHECK_DECLS before we've finished setting up the compiler's
CFLAGS seems like a pretty risky proposition, especially now that the
first use of that macro will result in a test to see whether the compiler
gives warning or error for undeclared built-in functions. That answer
could very easily get changed later than where PGAC_LLVM_SUPPORT is
called; furthermore, it's hardly unlikely that flags such as -D_GNU_SOURCE
could change visibility of declarations. Hence, be a little less cavalier
about where to do LLVM-related tests. This results in v11 and HEAD doing
the warning-or-error check at the same place in the script as older
branches are doing it, which seems like a good thing.
Per further thought about commits 0b59b0e8b and 16fbac39f.
The test case that Autoconf uses to discover whether a function has
been declared doesn't work reliably with clang, because clang reports
a warning not an error if the name is a known built-in function.
On some platforms, this results in a lot of compile-time warnings about
strlcpy and related functions not having been declared.
There is a fix for this (by Noah Misch) in the upstream Autoconf sources,
but since they've not made a release in years and show no indication of
doing so anytime soon, let's just absorb their fix directly. We can
revert this when and if we update to a newer Autoconf release.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/26819.1542515567@sss.pgh.pa.us
Any Autoconf macro that uses AC_REQUIRES -- directly or indirectly --
must not be inside a plain shell "if" test; if it is, whatever code
gets pulled in by the AC_REQUIRES will also be inside that "if".
Instead of "if" we can use AS_IF, which knows how to get this right
(cf commit 01051a987).
The only immediate problem from getting this wrong was that AC_PROG_AWK
had to be run twice, once inside the "if llvm" block and once in the
main line. However, it broke a different patch I'm about to submit
more thoroughly.
Add another transfer mode --clone to pg_upgrade (besides the existing
--link and the default copy), using special file cloning calls. This
makes the file transfer faster and more space efficient, achieving
speed similar to --link mode without the associated drawbacks.
On Linux, file cloning is supported on Btrfs and XFS (if formatted with
reflink support). On macOS, file cloning is supported on APFS.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Forward to POSIX pread() and pwrite(), or emulate them if unavailable.
The emulation is not perfect as the file position is changed, so
we'll put pg_ prefixes on the names to minimize the risk of confusion
in future patches that might inadvertently try to mix pread() and read()
on the same file descriptor.
Author: Thomas Munro
Reviewed-by: Tom Lane, Jesper Pedersen
Discussion: https://postgr.es/m/CAEepm=02rapCpPR3ZGF2vW=SBHSdFYO_bz_f-wwWJonmA3APgw@mail.gmail.com
I added HAVE_IPV6 to Makefile.global way back in commit 7703e55c3
so that we could transmit its value to the shell-script version of
initdb. Since initdb was rewritten in C, it's been finding that
out from pg_config.h instead, so this is useless. Keeping it here
just wastes configure and make cycles, plus it's a potential
two-sources-of-truth problem.
The solution arrived at in commit e74dd00f5 presumes that the compiler
has a suitable default -isysroot setting ... but further experience
shows that in many combinations of macOS version, XCode version, Xcode
command line tools version, and phase of the moon, Apple's compiler
will *not* supply a default -isysroot value.
We could potentially go back to the approach used in commit 68fc227dd,
but I don't have a lot of faith in the reliability or life expectancy of
that either. Let's just revert to the approach already shipped in 11.0,
namely specifying an -isysroot switch globally. As a partial response to
the concerns raised by Jakob Egger, adjust the contents of Makefile.global
to look like
CPPFLAGS = -isysroot $(PG_SYSROOT) ...
PG_SYSROOT = /path/to/sysroot
This allows overriding the sysroot path at build time in a relatively
painless way.
Add documentation to installation.sgml about how to use the PG_SYSROOT
option. I also took the opportunity to document how to work around
macOS's "System Integrity Protection" feature.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
To avoid the sorts of problems complained of by Jakob Egger, it'd be
best if configure didn't emit any references to the sysroot path at all.
In the case of PL/Tcl, we can do that just by keeping our hands off the
TCL_INCLUDE_SPEC string altogether. In the case of PL/Perl, we need to
substitute -iwithsysroot for -I in the compile commands, which is easily
handled if we change to using a configure output variable that includes
the switch not only the directory name. Since PL/Tcl and PL/Python
already do it like that, this seems like good consistency cleanup anyway.
Hence, this replaces the advice given to Perl-related extensions in commit
5e2217131; instead of writing "-I$(perl_archlibexp)/CORE", they should
just write "$(perl_includespec)". (The old way continues to work, but not
on recent macOS.)
It's still the case that configure needs to be aware of the sysroot
path internally, but that's cleaner than what we had before.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
Rethink the solution applied in commit 5e2217131 to get PL/Tcl to
build on macOS Mojave. I feared that adding -isysroot globally might
have undesirable consequences, and sure enough Jakob Egger reported
one: it complicates building extensions with a different Xcode version
than was used for the core server. (I find that a risky proposition
in general, but apparently it works most of the time, so we shouldn't
break it if we don't have to.)
We'd already adopted the solution for PL/Perl of inserting the sysroot
path directly into the -I switches used to find Perl's headers, and we
can do the same thing for PL/Tcl by changing the -iwithsysroot switch
that Apple's tclConfig.sh reports. This restricts the risks to PL/Perl
and PL/Tcl themselves and directly-dependent extensions, which is a lot
more pleasing in general than a global -isysroot switch.
Along the way, tighten the test to see if we need to inject the sysroot
path into $perl_includedir, as I'd speculated about upthread but not
gotten round to doing.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
NetBSD-current generates a large number of warnings about "%m" not
being appropriate to use with *printf functions. While that's true
for their native printf, it's surely not true for snprintf.c, so I
think they have misunderstood gcc's definition of the "gnu_printf"
archetype. Nonetheless, choosing "__syslog__" instead silences the
warnings; so teach configure about that.
Since this is only a cosmetic warning issue (and anyway it depends
on previous hacking to be self-consistent), no back-patch.
Discussion: https://postgr.es/m/16785.1539046036@sss.pgh.pa.us
In combination, these changes make our version of snprintf as fast
or faster than most platforms' native snprintf, except for cases
involving floating-point conversion (which we still delegate to
the native sprintf). The speed penalty for a float conversion
is down to around 10% though, much better than before.
Notable changes:
* Rather than always parsing the format twice to see if it contains
instances of %n$, do the extra scan only if we actually find a $.
This obviously wins for non-localized formats, and even when there
is use of %n$, we can avoid scanning text before the first % twice.
* Use strchrnul() if available to find the next %, and emit the
literal text between % escapes as strings rather than char-by-char.
* Create a bespoke function (dopr_outchmulti) for the common case
of emitting N copies of the same character, in place of writing
loops around dopr_outch.
* Simplify construction of the format string for invocations of sprintf
for floats.
* Const-ify some internal functions, and avoid unnecessary use of
pass-by-reference arguments.
Patch by me, reviewed by Andres Freund
Discussion: https://postgr.es/m/11787.1534530779@sss.pgh.pa.us
The method we've traditionally used, of redeclaring strerror_r() to
see if the compiler complains of inconsistent declarations, turns out
not to work reliably because some compilers only report a warning,
not an error. Amazingly, this has gone undetected for years, even
though it certainly breaks our detection of whether strerror_r
succeeded.
Let's instead test whether the compiler will take the result of
strerror_r() as a switch() argument. It's possible this won't
work universally either, but it's the best idea I could come up with
on the spur of the moment.
We should probably back-patch this once the dust settles, but
first let's see what the buildfarm thinks of it.
Discussion: https://postgr.es/m/10877.1537993279@sss.pgh.pa.us
We've spent an awful lot of effort over the years in coping with
platform-specific vagaries of the *printf family of functions. Let's just
forget all that mess and standardize on always using src/port/snprintf.c.
This gets rid of a lot of configure logic, and it will allow a saner
approach to dealing with %m (though actually changing that is left for
a follow-on patch).
Preliminary performance testing suggests that as it stands, snprintf.c is
faster than the native printf functions for some tasks on some platforms,
and slower for other cases. A pending patch will improve that, though
cases with floating-point conversions will doubtless remain slower unless
we want to put a *lot* of effort into that. Still, we've not observed
that *printf is really a performance bottleneck for most workloads, so
I doubt this matters much.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
elog.c has long had a private strerror wrapper that handles assorted
possible failures or deficiencies of the platform's strerror. On Windows,
it also knows how to translate Winsock error codes, which the native
strerror does not. Move all this code into src/port/strerror.c and
define strerror() as a macro that invokes it, so that both our frontend
and backend code will have all of this behavior.
I believe this constitutes an actual bug fix on Windows, since AFAICS
our frontend code did not report Winsock error codes properly before this.
However, the main point is to lay the groundwork for implementing %m
in src/port/snprintf.c: the behavior we want %m to have is this one,
not the native strerror's.
Note that this throws away the prior use of src/port/strerror.c,
which was to implement strerror() on platforms lacking it. That's
been dead code for nigh twenty years now, since strerror() was
already required by C89.
We should likewise cause strerror_r to use this behavior, but
I'll tackle that separately.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
Apple's latest rearrangements of the system-supplied headers have broken
building of PL/Perl and PL/Tcl. The only practical way to fix PL/Tcl is to
start using the "-isysroot" compiler flag to point to SDK-supplied headers,
as Apple expects. We must also start distinguishing where to find Perl's
headers from where to find its shared library; but that seems like good
cleanup anyway.
Extensions that formerly did something like -I$(perl_archlibexp)/CORE
should now do -I$(perl_includedir)/CORE instead. perl_archlibexp
is still the place to look for libperl.so, though.
If for some reason you don't like the default -isysroot setting, you can
override that by setting PG_SYSROOT in configure's arguments. I don't
currently think people would need to do so, unless maybe for cross-version
build purposes.
In addition, teach configure where to find tclConfig.sh. Our traditional
method of searching $auto_path hasn't worked for the last couple of macOS
releases, and it now seems clear that Apple's not going to change that.
The workaround of manually specifying --with-tclconfig was annoying
already, but Mojave's made it a lot more so because the sysroot path now
has to be included as well. Let's just wire the knowledge into configure
instead. To avoid breaking builds against non-default Tcl installations
(e.g. MacPorts) wherein the $auto_path method probably still works,
arrange to try the additional case only after all else has failed.
Back-patch to all supported versions, since at least the buildfarm
cares about that. The changes are set up to not do anything on macOS
releases that are old enough to not have functional sysroot trees.
Previously, pgbench always used select(2) for this purpose, but that's
problematic for very high client counts, because select() can't deal
with file descriptor numbers larger than FD_SETSIZE. It's pretty common
for that to be only 1024 or so, whereas modern OSes can allow many more
open files than that. Using poll(2) would surmount that problem, but it
creates another one: poll()'s timeout resolution is only 1ms, which is
poor enough to cause problems with --rate specifications approaching or
exceeding 1K TPS.
On platforms that have ppoll(2), which includes Linux and recent
FreeBSD, we can use that to avoid the FD_SETSIZE problem without any
loss of timeout resolution. Hence, add configure logic to test for
ppoll(), and use it if available.
This patch introduces an abstraction layer into pgbench that could
be extended to support other kernel event-wait APIs such as kevents.
But actually adding such support is a matter for some future patch.
Doug Rady, reviewed by Robert Haas and Fabien Coelho, and whacked around
a good bit more by me
Discussion: https://postgr.es/m/23D017C9-81B7-484D-8490-FD94DEC4DF59@amazon.com
As clang currently doesn't support -fexcess-precision=standard,
compiling x86-32 code with SSE2 disabled, can lead to problems with
floating point overflow checks and the like.
This issue was noticed because clang, on at least some BSDs, defaults
to i386 compatibility, whereas it defaults to pentium4 on Linux. Our
forced usage of __builtin_isinf() lead to some overflow checks not
triggering when compiling for i386, e.g. when the result of the
calculation didn't overflow in 80bit registers, but did so in 64bit.
While we could just fall back to a non-builtin isinf, it seems likely
that the use of 80bit registers leads to other problems (which is why
we force the flag for GCC already). Therefore error out when
detecting clang in that situation.
Reported-By: Victor Wagner
Analyzed-By: Andrew Gierth and Andres Freund
Author: Andres Freund
Discussion: https://postgr.es/m/20180905005130.ewk4xcs5dgyzcy45@alap3.anarazel.de
Backpatch: 9.3-, all supported versions are affected
Before this commit LLVM 7 was supported, but only if one explicitly
provided LLVM_CONFIG= and CLANG= paths. As LLVM 7 is the first
version that includes our upstreamed debugging and profiling features,
and as debian is planning to default to 7 due to wider architecture
support, it seems good to support auto-detecting that version.
Author: Christoph Berg
Discussion: https://postgr.es/m/20180912124517.GD24584@msg.df7cb.de
Backpatch: 11, where LLVM was introduced
In 86d78ef50e I enabled configure to check for C99 support, with the
goal of checking which platforms support C99. While there are a few
machines without C99 support among our buildfarm animals,
de-supporting them for v12 was deemed acceptable.
While not tested in aforementioned commit, the biggest increase in
minimum compiler version comes from MSVC, which gained C99 support
fairly late. The subset in MSVC 2013 is sufficient for our needs, at
this point. While that is a significant increase in minimum version,
the existing windows binaries are already built with a new enough
version.
Make configure error out if C99 support could not be detected. For
MSVC builds, increase the minimum version to 2013.
The increase to MSVC 2013 allows us to get rid of VCBuildProject.pm,
as that was only required for MSVC 2005/2008.
Author: Andres Freund
Discussion: https://postgr.es/m/97d4b165-192d-3605-749c-f614a0c4e783@2ndquadrant.com
Since commit e1d19c902, buildfarm member gharial has been failing with
symptoms indicating that snprintf sometimes returns -1 for buffer
overrun, even though it passes the added configure check. Some
google research suggests that this happens only in limited cases,
such as when the overrun happens partway through a %d item. Adjust
the configure check to exercise it that way. Since I'm now feeling
more paranoid than I was before, also make the test explicitly verify
that the buffer doesn't get physically overrun.
Since our substitute snprintf now returns a C99-compliant result,
there's no need anymore to have complicated code to cope with pre-C99
behavior. We can just make configure substitute snprintf.c if it finds
that the system snprintf() is pre-C99. (Note: I do not believe that
there are any platforms where this test will trigger that weren't
already being rejected due to our other C99-ish feature requirements for
snprintf. But let's add the check for paranoia's sake.) Then, simplify
the call sites that had logic to cope with the pre-C99 definition.
I also dropped some stuff that was being paranoid about the possibility
of snprintf overrunning the given buffer. The only reports we've ever
heard of that being a problem were for Solaris 7, which is long dead,
and we've sure not heard any reports of these assertions triggering in
a long time. So let's drop that complexity too.
Likewise, drop some code that wasn't trusting snprintf to set errno
when it returns -1. That would be not-per-spec, and again there's
no real reason to believe it is a live issue, especially not for
snprintfs that pass all of configure's feature checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
Based on recent discussion it seems possible that we might start to
rely on more of C99. A prerequisite for that is enabling support for
that on used compilers.
Let's see on which buildfarm members autoconf's AC_PROG_CC_C99() is
sufficient to do so. There's probably at least one member where the
compiler is too old, but that'd probably be OK.
If we go for this permanently we'd likely want to clean out / up a few
other configure tests.
Note this does not touch the msvc build infrastructure, which'd need
separate treatment.
Discussion: https://postgr.es/m/20180815222401.kxsupl5zie2jgi4x@alap3.anarazel.de
This reverts commit 3a60c8ff89. Buildfarm
results show that that caused a whole bunch of new warnings on platforms
where gcc believes the local printf to be non-POSIX-compliant. This
problem outweighs the hypothetical-anyway possibility of getting warnings
for misuse of %m. We could use gnu_printf archetype when we've substituted
src/port/snprintf.c, but that brings us right back to the problem of not
getting warnings for %m.
A possible answer is to attack it in the other direction by insisting
that %m support be included in printf's feature set, but that will take
more investigation. In the meantime, revert the previous change, and
update the comment for PGAC_C_PRINTF_ARCHETYPE to more fully explain
what's going on.
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
The elog/ereport family of functions certainly support the %m format spec,
because they implement it "by hand". But elsewhere we have printf wrappers
that might or might not allow it depending on whether the platform's printf
does. (Most non-glibc versions don't, and notably, src/port/snprintf.c
doesn't.) Hence, rather than using the gnu_printf format archetype
interchangeably for all these functions, use it only for elog/ereport.
This will allow us to get compiler warnings for mistakes like the ones
fixed in commit a13b47a59, at least on platforms where printf doesn't
take %m and gcc is correctly configured to know it. (Unfortunately,
that won't happen on Linux, nor on macOS according to my testing.
It remains to be seen what the buildfarm's gcc-on-Windows animals will
think of this, but we may well have to rely on less-popular platforms
to warn us about unportable code of this kind.)
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
During the work of upstreaming my previous patches for gdb and perf
support the API changed. Adapt. Normally this wouldn't necessarily be
something to backpatch, but the previous API wasn't upstream, and at
least the gdb support is quite useful for debugging.
Author: Andres Freund
Backpatch: 11, where LLVM based JIT support was added.
gcc 8 has started emitting some warnings that are largely useless for
our purposes, particularly since they complain about code following
the project-standard coding convention that path names are assumed
to be shorter than MAXPGPATH. Even if we make the effort to remove
that assumption in some future release, the changes wouldn't get
back-patched. Hence, just suppress these warnings, on compilers that
have these switches.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/1524563856.26306.9.camel@gunduz.org
We used to claim to support platforms using 'q' or 'I64' as the printf
length modifier for long long int, by dint of replacing snprintf with
our own code which uses the C99 standard 'll' modifier. But that is
only adequate if we use INT64_MODIFIER only in snprintf-based calls,
not directly with the platform's native printf or fprintf. Which
hasn't been the case for years. We had not noticed, partially because
of inadequate test coverage, and partially because the buildfarm is
almost completely bare of machines that won't take 'll'. The last
one seems to have been frogmouth, which was adjusted recently so that
it will take 'll'. We might as well just give up on the pretense
that anything else works, and save ourselves some configure cycles.
Discussion: https://postgr.es/m/13103.1526749980@sss.pgh.pa.us
Discussion: https://postgr.es/m/24769.1526772680@sss.pgh.pa.us
Ancient HPUX, for one, does this. We hadn't noticed due to the lack
of regression tests that required a working strtoll.
(I was slightly tempted to remove the other historical spelling,
strto[u]q, since it seems we have no buildfarm members testing that case.
But I refrained.)
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
Buildfarm member dromedary is still unhappy about the recently-added
ecpg "long long" tests. The reason turns out to be that it includes
"-ansi" in its CFLAGS, and in their infinite wisdom Apple have decided
to hide the declarations of strtoll/strtoull in C89-compliant builds.
(I find it pretty curious that they hide those function declarations
when you can nonetheless declare a "long long" variable, but anyway
that is their behavior, both on dromedary's obsolete macOS version and
the newest and shiniest.) As a result, gcc assumes these functions
return "int", leading naturally to wrong results.
(Looking at dromedary's past build results, it's evident that this
problem also breaks pg_strtouint64() on 32-bit platforms; but we
evidently have no regression tests that exercise that function with
values above 32 bits.)
To fix, supply declarations for these functions when the platform
provides the functions but not the declarations, using the same type
of mechanism as we use for some other similar cases.
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
ARMv8 introduced special CPU instructions for calculating CRC-32C. Use
them, when available, for speed.
Like with the similar Intel CRC instructions, several factors affect
whether the instructions can be used. The compiler intrinsics for them must
be supported by the compiler, and the instructions must be supported by the
target architecture. If the compilation target architecture does not
support the instructions, but adding "-march=armv8-a+crc" makes them
available, then we compile the code with a runtime check to determine if
the host we're running on supports them or not.
For the runtime check, use glibc getauxval() function. Unfortunately,
that's not very portable, but I couldn't find any more portable way to do
it. If getauxval() is not available, the CRC instructions will still be
used if the target architecture supports them without any additional
compiler flags, but the runtime check will not be available.
Original patch by Yuqi Gu, heavily modified by me. Reviewed by Andres
Freund, Thomas Munro.
Discussion: https://www.postgresql.org/message-id/HE1PR0801MB1323D171938EABC04FFE7FA9E3110%40HE1PR0801MB1323.eurprd08.prod.outlook.com
We already do this for Perl and some other interesting tools, so it
seems sensible to do it for Python as well, especially since the
sub-release number is never determinable from other configure output
and even the major/minor numbers may not be clear without excavation
in config.log.
While at it, get rid of the code's assumption that both the major and
minor numbers contain exactly one digit. That will foreseeably be
broken by Python 3.10 in perhaps four or five years. That's far enough
out that we probably don't need to back-patch this.
Discussion: https://postgr.es/m/2186.1522681145@sss.pgh.pa.us
LLVM will be used for *optional* Just-in-time compilation
support. This commit just adds the configure infrastructure that
detects LLVM.
No documentation has been added for the --with-llvm flag, that'll be
added after the actual supporting code has been added.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This is an optional dependency. It'll be used for the upcoming LLVM
based just in time compilation support, which needs to wrap a few LLVM
C++ APIs so they're accessible from C..
For now test for C++ compilers unconditionally, without failing if not
present, to ensure wide buildfarm coverage. If we're bothered by the
additional test times (which are quite short) or verbosity, we can
later make the tests conditional on --with-llvm.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Since e3bdb2d926, libpq failed to build on
some platforms because they did not have SSL_clear_options(). Although
mainline OpenSSL introduced SSL_clear_options() after
SSL_OP_NO_COMPRESSION, so the code should have built fine, at least an
old NetBSD version (build farm "coypu" NetBSD 5.1 gcc 4.1.3 PR-20080704
powerpc) has SSL_OP_NO_COMPRESSION but no SSL_clear_options().
So add a configure check for SSL_clear_options(). If we don't find it,
skip the call. That means on such a platform one cannot *enable* SSL
compression if the built-in default is off, but that seems an unlikely
combination anyway and not very interesting in practice.
The new macro allows to test flags for different compilers and to
store them in different CFLAG like variables. The existing
PGAC_PROG_CC_CFLAGS_OPT and PGAC_PROG_CC_VAR_OPT are changed to be
just wrappers around the new function.
This'll be used by the upcoming LLVM support, to separately detect
capabilities used by clang, when generating bitcode.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Red Hat's notion of a basic Perl installation doesn't include Test::More
or Time::HiRes, and reportedly some Debian installs also omit Time::HiRes.
Check for those during configure to spare the user the pain of digging
through check-world output to find out what went wrong. While we're at it,
we should also check the version of Test::More, since TestLib.pm requires
at least 0.87.
In principle this could be back-patched, but it's probably not necessary.
Discussion: https://postgr.es/m/516.1521475003@sss.pgh.pa.us
Like the LDAP and SSL tests, these are not run by default but can be
selected via PG_TEST_EXTRA.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
The SSL and LDAP test suites are not run by default, as they are not
secure for multi-user environments. This commit adds an extra make
variable to optionally enable them, for example:
make check-world PG_TEST_EXTRA='ldap ssl'
Author: Michael Paquier <michael@paquier.xyz>
On Sparc64, use of __attribute__(aligned(8)) with __int128 causes faulty
code generation in gcc versions at least through 5.5.0. We can work around
that by disabling use of __int128, so teach configure to test for the bug.
This solution doesn't fix things for the case of cross-compiling with a
buggy compiler; to support that nicely, we'd need to add a manual disable
switch. Unless more such cases turn up, it doesn't seem worth the work.
Affected users could always edit pg_config.h manually.
In passing, fix some typos in the existing configure test for __int128.
They're harmless because we only compile that code not run it, but
they're still confusing for anyone looking at it closely.
This is needed in support of commit 751804998, so back-patch to 9.5
as that was.
Marina Polyakova, Victor Wagner, Tom Lane
Discussion: https://postgr.es/m/0d3a9fa264cebe1cb9966f37b7c06e86@postgrespro.ru
It seems we can't easily work around the lack of
X509_get_signature_nid(), so revert the previous attempts and just
disable the tls-server-end-point feature if we don't have it.
While ldaptls=1 provides an RFC 4513 conforming way to do LDAP
authentication with TLS encryption, there was an earlier de facto
standard way to do LDAP over SSL called LDAPS. Even though it's not
enshrined in a standard, it's still widely used and sometimes required
by organizations' network policies. There seems to be no reason not to
support it when available in the client library. Therefore, add support
when using OpenLDAP 2.4+ or Windows. It can be configured with
ldapscheme=ldaps or ldapurl=ldaps://...
Add tests for both ways of requesting LDAPS and a test for the
pre-existing ldaptls=1. Modify the 001_auth.pl test for "diagnostic
messages", which was previously relying on the server rejecting
ldaptls=1.
Author: Thomas Munro
Reviewed-By: Peter Eisentraut
Discussion: https://postgr.es/m/CAEepm=1s+pA-LZUjQ-9GQz0Z4rX_eK=DFXAF1nBQ+ROPimuOYQ@mail.gmail.com
On some systems the results of 64 bit __builtin_mul_overflow()
operations can be computed at compile time, but not at runtime. The
known cases are arm buildfar animals using clang where the runtime
operation is implemented in a unavailable function.
Try to avoid compile-time computation by using volatile arguments to
__builtin_mul_overflow(). In that case we hopefully will get a link
error when unavailable, similar to what buildfarm animals dangomushi
and gull are reporting.
Author: Andres Freund
Discussion: https://postgr.es/m/20171213213754.pydkyjs6bt2hvsdb@alap3.anarazel.de
Commit 9fa6f00b1 assumed that __builtin_constant_p("string literal")
is TRUE, if the compiler has that function at all. Buildfarm results
show that Sun Studio 12, at least, breaks that assumption. Removing
that usage would leave us with no mechanical check for a very fragile
coding requirement, so instead teach configure to ignore
__builtin_constant_p() if it doesn't behave that way. We could
complicate matters by distinguishing three cases (no such function,
vs does, vs doesn't work for string literals); but for now, that seems
unnecessary because our other existing uses of this function are just
fairly minor optimizations of non-returning elog/ereport. We can live
without that on the small population of compilers that act this way.
Discussion: https://postgr.es/m/22997.1513264066@sss.pgh.pa.us
It's not easy to get signed integer overflow checks correct and
fast. Therefore abstract the necessary infrastructure into a common
header providing addition, subtraction and multiplication for 16, 32,
64 bit signed integers.
The new macros aren't yet used, but a followup commit will convert
several open coded overflow checks.
Author: Andres Freund, with some code stolen from Greg Stark
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20171024103954.ztmatprlglz3rwke@alap3.anarazel.de
This is necessary for ActivePerl 5.18 onwards and for Strawberry Perl.
It is not sufficient for 32-bit builds with newer Visual Studio; these
fail with error LINK2026. Back-patch to 9.3 (all supported versions).
Reported by Victor Wagner.
Discussion: https://postgr.es/m/20160326154321.7754ab8f@wagner.wagner.home
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
Our initial work with int128 neglected alignment considerations, an
oversight that came back to bite us in bug #14897 from Vincent Lachenal.
It is unsurprising that int128 might have a 16-byte alignment requirement;
what's slightly more surprising is that even notoriously lax Intel chips
sometimes enforce that.
Raising MAXALIGN seems out of the question: the costs in wasted disk and
memory space would be significant, and there would also be an on-disk
compatibility break. Nor does it seem very practical to try to allow some
data structures to have more-than-MAXALIGN alignment requirement, as we'd
have to push knowledge of that throughout various code that copies data
structures around.
The only way out of the box is to make type int128 conform to the system's
alignment assumptions. Fortunately, gcc supports that via its
__attribute__(aligned()) pragma; and since we don't currently support
int128 on non-gcc-workalike compilers, we shouldn't be losing any platform
support this way.
Although we could have just done pg_attribute_aligned(MAXIMUM_ALIGNOF) and
called it a day, I did a little bit of extra work to make the code more
portable than that: it will also support int128 on compilers without
__attribute__(aligned()), if the native alignment of their 128-bit-int
type is no more than that of int64.
Add a regression test case that exercises the one known instance of the
problem, in parallel aggregation over a bigint column.
This will need to be back-patched, along with the preparatory commit
91aec93e6. But let's see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/20171110185747.31519.28038@wrigleys.postgresql.org
Upon further review, our Bonjour code doesn't actually work with the
Avahi not-too-compatible compatibility library. While you can get it
to work on non-macOS platforms if you link to Apple's own mDNSResponder
code, there don't seem to be many people who care about that. Leaving in
the AC_SEARCH_LIBS call seems more likely to encourage people to build
broken configurations than to do anything very useful.
Hence, remove the AC_SEARCH_LIBS call and put in a warning comment instead.
Discussion: https://postgr.es/m/2D8331C5-D64F-44C1-8717-63EDC6EAF7EB@brightforge.com
On macOS the relevant functions require no special library, but elsewhere
we need to pull in libdns_sd.
Back-patch to supported branches. No docs change since the docs do not
suggest that this is a Mac-only feature.
Luke Lonergan
Discussion: https://postgr.es/m/2D8331C5-D64F-44C1-8717-63EDC6EAF7EB@brightforge.com
configure computed PG_VERSION_NUM incorrectly. (Coulda sworn I tested
that logic back when, but it had an obvious thinko.)
pg_upgrade had not been taught about the new dispensation with just
one part in the major version number.
Both things accidentally failed to fail with 10.0, but with 10.1 we
got the wrong results.
Per buildfarm.
Per buildfarm animal Hornet and followup manual testing by Noah Misch,
it appears xlc miscompiles code using "restrict" in at least some
cases. Allow disabling restrict usage with FORCE_DISABLE_RESTRICT=yes
in template files, and do so for aix/xlc.
Author: Andres Freund and Tom Lane
Discussion: https://postgr.es/m/1820.1507918762@sss.pgh.pa.us
Unfortunately using 'restrict' plainly causes problems with MSVC,
which supports restrict only as '__restrict'. Defining 'restrict' to
'__restrict' unfortunately causes a conflict with MSVC's usage of
__declspec(restrict) in headers.
Therefore define pg_restrict to the appropriate keyword instead, and
replace existing usages.
This replaces the temporary workaround introduced in 36b4b91ba0.
Author: Andres Freund
Discussion: https://postgr.es/m/2656.1507830907@sss.pgh.pa.us
Will be used in later commits improving performance for a few key
routines where information about aliasing allows for significantly
better code generation.
This allows to use the C99 'restrict' keyword without breaking C89, or
for that matter C++, compilers. If not supported it's defined to be
empty.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
The previous placement of the fallback implementation in libpgcommon
was problematic, because libpqport functions need strnlen
functionality.
Move replacement into libpgport. Provide strnlen() under its posix
name, instead of pg_strnlen(). Fix stupid configure bug, executing the
test only when compiled with threading support.
Author: Andres Freund
Discussion: https://postgr.es/m/E1e1gR2-0005fB-SI@gemulon.postgresql.org
Upcoming patches are going to address performance issues that involve
slow system provided ntohs/htons etc. To address that expand
pg_bswap.h to provide pg_ntoh{16,32,64}, pg_hton{16,32,64} and
optimize their respective implementations by using compiler intrinsics
for gcc compatible compilers and msvc. Fall back to manual
implementations using shifts etc otherwise.
Additionally remove multiple evaluation hazards from the existing
BSWAP32/64 macros, by replacing them with inline functions when
necessary. In the course of that the naming scheme is changed to
pg_bswap16/32/64.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
On Linux, shared memory segments created with shm_open() are backed by
swap files created in tmpfs. If the swap file needs to be extended,
but there's no tmpfs space left, you get a very unfriendly SIGBUS trap.
To avoid this, force allocation of the full request size when we create
the segment. This adds a few cycles, but none that we wouldn't expend
later anyway, assuming the request isn't hugely bigger than the actual
need.
Make this code #ifdef __linux__, because (a) there's not currently a
reason to think the same problem exists on other platforms, and (b)
applying posix_fallocate() to an FD created by shm_open() isn't very
portable anyway.
Back-patch to 9.4 where the DSM code came in.
Thomas Munro, per a bug report from Amul Sul
Discussion: https://postgr.es/m/1002664500.12301802.1471008223422.JavaMail.yahoo@mail.yahoo.com
These functions are required by SUS v2, which is our minimum baseline
for Unix platforms, and are present on all interesting Windows versions
as well. Even our oldest buildfarm members have them. Thus, we were not
testing the "!USE_WIDE_UPPER_LOWER" code paths, which explains why the bug
fixed in commit e6023ee7f escaped detection. Per discussion, there seems
to be no more real-world value in maintaining this option. Hence, remove
the configure-time tests for wcstombs() and towlower(), remove the
USE_WIDE_UPPER_LOWER symbol, and remove all the !USE_WIDE_UPPER_LOWER code.
There's not actually all that much of the latter, but simplifying the #if
nests is a win in itself.
Discussion: https://postgr.es/m/20170921052928.GA188913@rfd.leadboat.com
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
Instead of using a cast to force the constant to be the right width,
assume we can plaster on an L, UL, LL, or ULL suffix as appropriate.
The old approach to this is very hoary, dating from before we were
willing to require compilers to have working int64 types.
This fix makes the PG_INT64_MIN, PG_INT64_MAX, and PG_UINT64_MAX
constants safe to use in preprocessor conditions, where a cast
doesn't work. Other symbolic constants that might be defined using
[U]INT64CONST are likewise safer than before.
Also fix the SIZE_MAX macro to be similarly safe, if we are forced
to provide a definition for that. The test added in commit 2e70d6b5e
happens to do what we want even with the hack "(size_t) -1" definition,
but we could easily get burnt on other tests in future.
Back-patch to all supported branches, like the previous commits.
Discussion: https://postgr.es/m/15883.1504278595@sss.pgh.pa.us
Commit 3c163a7fc's original choice to ignore all #define symbols whose
names begin with underscore turns out to be too simplistic. On Windows,
some Perl installations are built with -D_USE_32BIT_TIME_T, and we must
absorb that or we get the wrong result for sizeof(PerlInterpreter).
This effectively re-reverts commit ef58b87df, which injected that symbol
in a hacky way, making it apply to all of Postgres not just PL/Perl.
More significantly, it did so on *all* 32-bit Windows builds, even when
the Perl build to be used did not select this option; so that it fails
to work properly with some newer Perl builds.
By making this change, we would be introducing an ABI break in 32-bit
Windows builds; but fortunately we have not used type time_t in any
exported Postgres APIs in a long time. So it should be OK, both for
PL/Perl itself and for third-party extensions, if an extension library
is built with a different _USE_32BIT_TIME_T setting than the core code.
Patch by me, based on research by Ashutosh Sharma and Robert Haas.
Back-patch to all supported branches, as commit 3c163a7fc was.
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
Various bugs can cause crashes, so don't use that function before ICU
53. It will fall back to the code path used for other encodings.
Since we now tie the function availability to an ICU version, we don't
need the configure test anymore. That also resolves the issue that the
test result was previously hardcoded for Windows.
researched by Daniel Verite <daniel@manitou-mail.org>, Peter Geoghegan
<pg@bowt.ie>, Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/f1438ec6-22aa-4029-9a3b-26f79d330e72%40manitou-mail.org
The check for IPC::Run we added in commit c254970ad is useful in simple
cases, but there are real use-cases where "prove" is coming from a
different Perl installation than the "perl" we want to use to build.
In such cases asking whether "perl" knows about IPC::Run is irrelevant
and can cause an unnecessary configure failure. Hence, if user has
specified a value for PROVE, skip the IPC::Run check. Per discussion
with Andrew Dunstan.
Discussion: https://postgr.es/m/E1dcE5n-0005Sk-UE@gemulon.postgresql.org
Without ICU's header files, "configure --with-icu" would succeed anyway,
at least when using the non-pkgconfig-based setup. Then you got a bunch of
ugly failures at build. Add an explicit header check to tighten that up.
Peter Eisentraut noted that commit 40b9f1921 had broken a configure
behavior that some people might rely on: AC_CHECK_PROGS(FOO,...) will
allow the search to be overridden by specifying a value for FOO on
configure's command line or in its environment, but AC_PATH_PROGS(FOO,...)
accepts such an override only if it's an absolute path. We had worked
around that behavior for some, but not all, of the pre-existing uses
of AC_PATH_PROGS by just skipping the macro altogether when FOO is
already set. Let's standardize on that workaround for all uses of
AC_PATH_PROGS, new and pre-existing, by wrapping AC_PATH_PROGS in a
new macro PGAC_PATH_PROGS. While at it, fix a deficiency of the old
workaround code by making sure we report the setting to configure's log.
Eventually I'd like to improve PGAC_PATH_PROGS so that it converts
non-absolute override inputs to absolute form, eg "PYTHON=python3"
becomes, say, PYTHON = /usr/bin/python3. But that will take some
nontrivial coding so it doesn't seem like a thing to do in late beta.
Discussion: https://postgr.es/m/90a92a7d-938e-507a-3bd7-ecd2b4004689@2ndquadrant.com
Previously we had a mix of uses of AC_CHECK_PROG[S] and AC_PATH_PROG[S].
The only difference between those macros is that the latter emits the
full path to the program it finds, eg "/usr/bin/prove", whereas the
former emits just "prove". Let's standardize on always emitting the
full path; this is better for documentation of the build, and it might
prevent some types of failures if later build steps are done with
a different PATH setting.
I did not touch the AC_CHECK_PROG[S] calls in ax_pthread.m4 and
ax_prog_perl_modules.m4. There seems no need to make those diverge from
upstream, since we do not record the programs sought by the former, while
the latter's call to AC_CHECK_PROG(PERL,...) will never be reached.
Discussion: https://postgr.es/m/25937.1501433410@sss.pgh.pa.us
The Perl documentation is very clear that stuff calling libperl should
be built with the compiler switches shown by Perl's $Config{ccflags}.
We'd been ignoring that up to now, and mostly getting away with it,
but recent Perl versions contain ABI compatibility cross-checks that
fail on some builds because of this omission. In particular the
sizeof(PerlInterpreter) can come out different due to some fields being
added or removed; which means we have a live ABI hazard that we'd better
fix rather than continuing to sweep it under the rug.
However, it still seems like a bad idea to just absorb $Config{ccflags}
verbatim. In some environments Perl was built with a different compiler
that doesn't even use the same switch syntax. -D switch syntax is pretty
universal though, and absorbing Perl's -D switches really ought to be
enough to fix the problem.
Furthermore, Perl likes to inject stuff like -D_LARGEFILE_SOURCE and
-D_FILE_OFFSET_BITS=64 into $Config{ccflags}, which affect libc ABIs on
platforms where they're relevant. Adopting those seems dangerous too.
It's unclear whether a build wherein Perl and Postgres have different ideas
of sizeof(off_t) etc would work, or whether anyone would care about making
it work. But it's dead certain that having different stdio ABIs in
core Postgres and PL/Perl will not work; we've seen that movie before.
Therefore, let's also ignore -D switches for symbols beginning with
underscore. The symbols that we actually need to import should be the ones
mentioned in perl.h's PL_bincompat_options stanza, and none of those start
with underscore, so this seems likely to work. (If it turns out not to
work everywhere, we could consider intersecting the symbols mentioned in
PL_bincompat_options with the -D switches. But that will be much more
complicated, so let's try this way first.)
This will need to be back-patched, but first let's see what the
buildfarm makes of it.
Ashutosh Sharma, some adjustments by me
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
The TAP tests mostly don't work without IPC::Run, and the reason for
the failure is not immediately obvious from the error messages you get.
So teach configure to reject --enable-tap-tests unless IPC::Run exists.
Mostly this just involves adding ax_prog_perl_modules.m4 from the GNU
autoconf archives.
This was discussed last year, but we held off on the theory that we might
be switching to CMake soon. That's evidently not happening for v10,
so let's absorb this now.
Eugene Kazakov and Michael Paquier
Discussion: https://postgr.es/m/56BDDC20.9020506@postgrespro.ru
Discussion: https://postgr.es/m/CAB7nPqRVKG_CR4Dy_AMfE6DXcr6F7ygy2goa2atJU4XkerDRUg@mail.gmail.com
This reverts commit 81069a9efc.
Buildfarm results suggest that some platforms have versions of pselect(2)
that are not merely non-atomic, but flat out non-functional. Revert the
use-pselect patch to confirm this diagnosis (and exclude the no-SA_RESTART
patch as the source of trouble). If it's so, we should probably look into
blacklisting specific platforms that have broken pselect.
Discussion: https://postgr.es/m/9696.1493072081@sss.pgh.pa.us
Traditionally we've unblocked signals, called select(2), and then blocked
signals again. The code expects that the select() will be cancelled with
EINTR if an interrupt occurs; but there's a race condition, which is that
an already-pending signal will be delivered as soon as we unblock, and then
when we reach select() there will be nothing preventing it from waiting.
This can result in a long delay before we perform any action that
ServerLoop was supposed to have taken in response to the signal. As with
the somewhat-similar symptoms fixed by commit 893902085, the main practical
problem is slow launching of parallel workers. The window for trouble is
usually pretty short, corresponding to one iteration of ServerLoop; but
it's not negligible.
To fix, use pselect(2) in place of select(2) where available, as that's
designed to solve exactly this problem. Where not available, we continue
to use the old way, and are no worse off than before.
pselect(2) has been required by POSIX since about 2001, so most modern
platforms should have it. A bigger portability issue is that some
implementations are said to be non-atomic, ie pselect() isn't really
any different from unblock/select/reblock. Still, we're no worse off
than before on such a platform.
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point this
could be reverted, since we'd be using a self-pipe to solve the race
condition. But that's not happening before v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
poll.h is mandated by Single Unix Spec v2, the usual baseline for
postgres on unix. None of the unixoid buildfarms animals has
sys/poll.h but not poll.h. Therefore there's not much point to test
for sys/poll.h's existence and include it optionally.
Author: Andres Freund, per suggestion from Tom Lane
Discussion: https://postgr.es/m/20505.1492723662@sss.pgh.pa.us
All documentation is now built using XSLT. Remove all references to
Jade, DSSSL, also JadeTex and some other outdated tooling.
For chunked HTML builds, this changes nothing, but removes the
transitional "oldhtml" target. The single-page HTML build is ported
over to XSLT. For PDF builds, this removes the JadeTex builds and moves
the FOP builds in their place.
copyObject() is declared to return void *, which allows easily assigning
the result independent of the input, but it loses all type checking.
If the compiler supports typeof or something similar, cast the result to
the input type. This creates a greater amount of type safety. In some
cases, where the result is assigned to a generic type such as Node * or
Expr *, new casts are now necessary, but in general casts are now
unnecessary in the normal case and indicate that something unusual is
happening.
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Add a column collprovider to pg_collation that determines which library
provides the collation data. The existing choices are default and libc,
and this adds an icu choice, which uses the ICU4C library.
The pg_locale_t type is changed to a union that contains the
provider-specific locale handles. Users of locale information are
changed to look into that struct for the appropriate handle to use.
Also add a collversion column that records the version of the collation
when it is created, and check at run time whether it is still the same.
This detects potentially incompatible library upgrades that can corrupt
indexes and other structures. This is currently only supported by
ICU-provided collations.
initdb initializes the default collation set as before from the `locale
-a` output but also adds all available ICU locales with a "-x-icu"
appended.
Currently, ICU-provided collations can only be explicitly named
collations. The global database locales are still always libc-provided.
ICU support is enabled by configure --with-icu.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
We had some AC_CHECK_HEADER tests that were really wastes of cycles,
because the code proceeded to #include those headers unconditionally
anyway, in all or a large majority of cases. The lack of complaints
shows that those headers are available on every platform of interest,
so we might as well let configure run a bit faster by not probing
those headers at all.
I suspect that some of the tests I left alone are equally useless, but
since all the existing #includes of the remaining headers are properly
guarded, I didn't touch them.
Per discussion, the time has come to do this. The handwriting has been
on the wall at least since 9.0 that this would happen someday, whenever
it got to be too much of a burden to support the float-timestamp option.
The triggering factor now is the discovery that there are multiple bugs
in the code that attempts to implement use of integer timestamps in the
replication protocol even when the server is built for float timestamps.
The internal float timestamps leak into the protocol fields in places.
While we could fix the identified bugs, there's a very high risk of
introducing more. Trying to build a wall that would positively prevent
mixing integer and float timestamps is more complexity than we want to
undertake to maintain a long-deprecated option. The fact that these
bugs weren't found through testing also indicates a lack of interest
in float timestamps.
This commit disables configure's --disable-integer-datetimes switch
(it'll still accept --enable-integer-datetimes, though), removes direct
references to USE_INTEGER_DATETIMES, and removes discussion of float
timestamps from the user documentation. A considerable amount of code is
rendered dead by this, but removing that will occur as separate mop-up.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Commit 04aad4018 added this check after the search for a Python shared
library, which seems to me to be a pretty unfriendly ordering. The
search might fail for what are basically version-related reasons, and
in such a case it'd be better to say "your Python is too old" than
"could not find shared library for Python".
There is no specific reason for this right now, but keeping support for
old Python versions around indefinitely increases the maintenance
burden. The oldest supported Python version is now Python 2.4, which is
still shipped in RHEL/CentOS 5 by default.
In configure, add a check for the required Python version and give a
friendly error message for an old version, instead of relying on an
obscure build error later on.
The advantage of clock_gettime() is that the API allows the result to
be precise to nanoseconds, not just microseconds as in gettimeofday().
Now that it's routinely possible to do tens of plan node executions
in 1us, we really need more precision than gettimeofday() can offer
for EXPLAIN ANALYZE to accumulate statistics with.
Some research shows that clock_gettime() is available on pretty nearly
every modern Unix-ish platform, and as far as I have been able to test,
it has about the same execution time as gettimeofday(), so there's no
loss in switching over. (By the same token, this doesn't do anything
to fix the fact that we really wish clock readings were faster. But
there's enough win here to justify changing anyway.)
A small side benefit is that on most platforms, we can use CLOCK_MONOTONIC
instead of CLOCK_REALTIME and thereby render EXPLAIN impervious to
concurrent resets of the system clock. (This means that code must not
assume that the contents of struct instr_time have any well-defined
interpretation as timestamps, but really that was true before.)
Some platforms offer nonstandard clock IDs that might be of interest.
This patch knows we should use CLOCK_MONOTONIC_RAW on macOS, because it
provides more precision and is faster to read than their CLOCK_MONOTONIC.
If there turn out to be many more cases where we need special rules, it
might be appropriate to handle the selection of clock ID in configure,
but for the moment that doesn't seem worth the trouble.
Discussion: https://postgr.es/m/31856.1400021891@sss.pgh.pa.us
Thinko in ecb0d20a9 --- this needs to go one level further out in
the "if" nest. As it stood, nothing got printed in the case of
selecting named POSIX semaphores. Cosmetic issue only, but a bug.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
Unlike the current pgcrypto function, the source is chosen by configure.
That makes it easier to test different implementations, and ensures that
we don't accidentally fall back to a less secure implementation, if the
primary source fails. All of those methods are quite reliable, it would be
pretty surprising for them to fail, so we'd rather find out by failing
hard.
If no strong random source is available, we fall back to using erand48(),
seeded from current timestamp, like PostmasterRandom() was. That isn't
cryptographically secure, but allows us to still work on platforms that
don't have any of the above stronger sources. Because it's not very secure,
the built-in implementation is only used if explicitly requested with
--disable-strong-random.
This replaces the more complicated Fortuna algorithm we used to have in
pgcrypto, which is unfortunate, but all modern platforms have /dev/urandom,
so it doesn't seem worth the maintenance effort to keep that. pgcrypto
functions that require strong random numbers will be disabled with
--disable-strong-random.
Original patch by Magnus Hagander, tons of further work by Michael Paquier
and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqRWkNYRRPJA7-cF+LfroYV10pvjdz6GNvxk-Eee9FypKA@mail.gmail.com
SCO OpenServer and SCO UnixWare are more or less dead platforms.
We have never had a buildfarm member testing the "sco" port, and
the last "unixware" member was last heard from in 2012, so it's
fair to doubt that the code even compiles anymore on either one.
Remove both ports. We can always undo this if someone shows up
with an interest in maintaining and testing these platforms.
Discussion: <17177.1476136994@sss.pgh.pa.us>
We've had support for using unnamed POSIX semaphores instead of System V
semaphores for quite some time, but it was not used by default on any
platform. Since many systems have rather small limits on the number of
SysV semaphores allowed, it seems desirable to switch to POSIX semaphores
where they're available and don't create performance or kernel resource
problems. Experimentation by me shows that unnamed POSIX semaphores
are at least as good as SysV semaphores on Linux, and we previously had
a report from Maksym Sobolyev that FreeBSD is significantly worse with
SysV semaphores than POSIX ones. So adjust those two platforms to use
unnamed POSIX semaphores, if configure can find the necessary library
functions. If this goes well, we may switch other platforms as well,
but it would be advisable to test them individually first.
It's not currently contemplated that we'd encourage users to select
a semaphore API for themselves, but anyone who wants to experiment
can add PREFERRED_SEMAPHORES=UNNAMED_POSIX (or NAMED_POSIX, or SYSV)
to their configure command line to do so.
I also tweaked configure to report which API it's selected, mainly
so that we can tell that from buildfarm reports.
I did not touch the user documentation's discussion about semaphores;
that will need some adjustment once the dust settles.
Discussion: <8536.1475704230@sss.pgh.pa.us>
On buildfarm member cockatiel, that library is in /usr/bin.
(Possibly we should look at $PATH on this platform?)
Per off-list report from Andrew Dunstan.
Per discussion with Andrew Dunstan, it seems there are three peculiarities
of the Python installation on MinGW (or at least, of the instance on
buildfarm member frogmouth). First, the library name doesn't contain
"2.7" but just "27". It looks like we can deal with that by consulting
get_config_vars('VERSION') to see whether a dot should be used or not.
Second, the library might be in c:/Windows/System32, analogously to it
possibly being in /usr/lib on Unix-oid platforms. Third, it's apparently
not standard to use the prefix "lib" on the file name. This patch will
accept files with or without "lib", but the first part of that may well
be dead code.
Most Unix-oid platforms provide a symlink "libfoo.so" -> "libfoo.so.n.n"
to allow the linker to resolve a reference "-lfoo" to a version-numbered
shared library. OpenBSD has apparently hacked ld(1) to do this internally,
because there are no such symlinks to be found in their library
directories. Tweak the new code in PGAC_CHECK_PYTHON_EMBED_SETUP to cope.
Per buildfarm member curculio.
Older versions of Python produce garbage (or at least useless) values of
get_config_vars('LDLIBRARY'). Newer versions produce garbage (or at least
useless) values of get_config_vars('SO'), which was defeating our configure
logic that attempted to identify where the Python shlib really is. The net
result, at least with a stock Python 3.5 installation on macOS, was that
we were linking against a static library in the mistaken belief that it was
a shared library. This managed to work, if you count statically absorbing
libpython into plpython.so as working. But it no longer works as of commit
d51924be8, because now we get separate static copies of libpython in
plpython.so and hstore_plpython.so, and those can't interoperate on the
same data. There are some other infelicities like assuming that nobody
ever installs a private version of Python on a macOS machine.
Hence, forget about looking in $python_configdir for the Python shlib;
as far as I can tell no version of Python has ever put one there, and
certainly no currently-supported version does. Also, rather than relying
on get_config_vars('SO'), just try all the possibilities for shlib
extensions. Also, rather than trusting Py_ENABLE_SHARED, believe we've
found a shlib only if it has a recognized extension. Last, explicitly
cope with the possibility that the shlib is really in /usr/lib and
$python_libdir is a red herring --- this is the actual situation on older
macOS, but we were only accidentally working with it.
Discussion: <5300.1475592228@sss.pgh.pa.us>
Using exit() requires stdlib.h, which is not included. Use return
instead. Also add return type for main().
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Per buildfarm member curculio.
Discussion: <2442.1473957669@sss.pgh.pa.us>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to all supported branches, per popular demand. In back-branches,
we still support OpenSSL 0.9.7 and above. OpenSSL 0.9.6 should still work
too, but I didn't test it. In master, we only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
This is a good bit more complicated than the average new-version stamping
commit, because it includes various adjustments in pursuit of changing
from three-part to two-part version numbers. It's likely some further
work will be needed around that change; but this is enough to get through
the regression tests, at least in Unix builds.
Peter Eisentraut and Tom Lane
awk's equality-comparison operator is "==" not "=". We got this right
in many places, but not in configure's checks for supported version
numbers of flex and perl. It hadn't been noticed because unsupported
versions are so old as to be basically extinct in the wild, and because
the only consequence is whether or not a WARNING flies by during
configure.
Daniel Gustafsson noted the problem with respect to the test for flex,
I found the other by reviewing other awk calls.
Create a "bsd" auth method that works the same as "password" so far as
clients are concerned, but calls the BSD Authentication service to
check the password. This is currently only available on OpenBSD.
Marisa Emerson, reviewed by Thomas Munro
Peter Eisentraut
Tom Lane
Thomas Munro
Bruce Momjian
Michael Paquier
Alvaro Herrera
Noah Misch
Andrew Dunstan
Andrew Gierth
Magnus Hagander
Peter Eisentraut
Andres Freund
Heikki Linnakangas
Simon Riggs