All supported platforms support the C89 standard function atexit()
(SunOS 4 probably being the last one not to), and supporting both
makes the code clumsy.
smgrdounlink takes care to not throw an ERROR if it fails to unlink
something, but that caution was rendered useless by commit
3396000684, which put an smgrexists call in
front of it; smgrexists *does* throw error if anything looks funny, such
as getting a permissions error from trying to open the file. If that
happens post-commit, you get a PANIC, and what's worse the same logic
appears in the WAL replay code, so the database even fails to restart.
Restore the intended behavior by removing the smgrexists call --- it isn't
accomplishing anything that we can't do better by adjusting mdunlink's
ideas of whether it ought to warn about ENOENT or not.
Per report from Joseph Shraibman of unrecoverable crash after trying to
drop a table whose FSM fork had somehow gotten chmod'd to 000 permissions.
Backpatch to 8.4, where the bogus coding was introduced.
Heikki Linnakangas had the idea of rearranging GetSnapshotData to
avoid checking for sub-XIDs when no top-level XID is present. This
patch does that plus further a bit of further, related rearrangement.
Benchmarking show a significant improvement on unlogged tables at
higher concurrency levels, and mostly indifferent result on permanent
tables (which are presumably bottlenecked elsewhere). Most of the
benefit seems to come from using the new NormalTransactionIdPrecedes()
macro rather than the function call TransactionIdPrecedes().
This adds some I/O stats to the logging of autovacuum (when the
operation takes long enough that log_autovacuum_min_duration causes it
to be logged), so that it is easier to tune. Notably, it adds buffer
I/O counts (hits, misses, dirtied) and read and write rate.
Authors: Greg Smith and Noah Misch
This speeds up snapshot-taking and reduces ProcArrayLock contention.
Also, the PGPROC (and PGXACT) structures used by two-phase commit are
now allocated as part of the main array, rather than in a separate
array, and we keep ProcArray sorted in pointer order. These changes
are intended to minimize the number of cache lines that must be pulled
in to take a snapshot, and testing shows a substantial increase in
performance on both read and write workloads at high concurrencies.
Pavan Deolasee, Heikki Linnakangas, Robert Haas
When the system is idle for awhile after activity, the "smoothed_alloc"
state variable in BgBufferSync converges slowly to zero. With standard
IEEE float arithmetic this results in several iterations with denormalized
values, which causes kernel traps and annoying log messages on some
poorly-designed platforms. There's no real need to track such small values
of smoothed_alloc, so we can prevent the kernel traps by forcing it to zero
as soon as it's too small to be interesting for our purposes. This issue
is purely cosmetic, since the iterations don't happen fast enough for the
kernel traps to pose any meaningful performance problem, but still it seems
worth shutting up the log messages.
The kernel log messages were previously reported by a number of people,
but kudos to Greg Matthews for tracking down exactly where they were coming
from.
This reverts commit 0180bd6180.
contrib/userlock is gone, but user-level locking still exists,
and is exposed via the pg_advisory* family of functions.
There was a timing window between when oldestActiveXid was derived
and when it should have been derived that only shows itself under
heavy load. Move code around to ensure correct timing of derivation.
No change to StartupSUBTRANS() code, which is where this failed.
Bug report by Chris Redekop
If the initial snapshot had overflowed then we can start whenever
the latest snapshot is empty, not overflowed or as we did already,
start when the xmin on primary was higher than xmax of our starting
snapshot, which proves we have full snapshot data.
Bug report by Chris Redekop
In assert-enabled builds, we assert during the shutdown sequence that
the queues have been properly emptied, and during process startup that
we are inheriting empty queues. In non-assert enabled builds, we just
save a few cycles.
bgwriter is now a much less important process, responsible for page
cleaning duties only. checkpointer is now responsible for checkpoints
and so has a key role in shutdown. Later patches will correct doc
references to the now old idea that bgwriter performs checkpoints.
Has beneficial effect on performance at high write rates, but mainly
refactoring to more easily allow changes for power reduction by
simplifying previously tortuous code around required to allow page
cleaning and checkpointing to time slice in the same process.
Patch by me, Review by Dickson Guedes
We need not wait until the commit record is durably on disk, because
in the event of a crash the page we're updating with hint bits will
be gone anyway. Per off-list report from Heikki Linnakangas, this
can significantly degrade the performance of unlogged tables; I was
able to show a 2x speedup from this patch on a pgbench run with scale
factor 15. In practice, this will mostly help small, heavily updated
tables, because on larger tables you're unlikely to run into the same
row again before the commit record makes it out to disk.
one lock per backend or auxiliary process - the need for a lock for each
aux processes was not accounted for in NumLWLocks(). No-one noticed,
because the three locks needed for the three aux processes fit into the
few extra lwlocks we allocate for 3rd party modules that don't call
RequestAddinLWLocks() (NUM_USER_DEFINED_LWLOCKS, 4 by default).
A transaction can export a snapshot with pg_export_snapshot(), and then
others can import it with SET TRANSACTION SNAPSHOT. The data does not
leave the server so there are not security issues. A snapshot can only
be imported while the exporting transaction is still running, and there
are some other restrictions.
I'm not totally convinced that we've covered all the bases for SSI (true
serializable) mode, but it works fine for lesser isolation modes.
Joachim Wieland, reviewed by Marko Tiikkaja, and rather heavily modified
by Tom Lane
There's no need to clamp the standby's xmin to be greater than
GetOldestXmin's result; if there were any such need this logic would be
hopelessly inadequate anyway, because it fails to account for
within-database versus cluster-wide values of GetOldestXmin. So get rid of
that, and just rely on sanity-checking that the xmin is not wrapped around
relative to the nextXid counter. Also, don't reset the walsender's xmin if
the current feedback xmin is indeed out of range; that just creates more
problems than we already had. Lastly, don't bother to take the
ProcArrayLock; there's no need to do that to set xmin.
Also improve the comments about this in GetOldestXmin itself.
In REPEATABLE READ (nee SERIALIZABLE) mode, an attempt to do
GetTransactionSnapshot() between AbortTransaction and CleanupTransaction
failed, because GetTransactionSnapshot would recompute the transaction
snapshot (which is already wrong, given the isolation mode) and then
re-register it in the TopTransactionResourceOwner, leading to an Assert
because the TopTransactionResourceOwner should be empty of resources after
AbortTransaction. This is the root cause of bug #6218 from Yamamoto
Takashi. While changing plancache.c to avoid requesting a snapshot when
handling a ROLLBACK masks the problem, I think this is really a snapmgr.c
bug: it's lower-level than the resource manager mechanism and should not be
shutting itself down before we unwind resource manager resources. However,
just postponing the release of the transaction snapshot until cleanup time
didn't work because of the circular dependency with
TopTransactionResourceOwner. Fix by managing the internal reference to
that snapshot manually instead of depending on TopTransactionResourceOwner.
This saves a few cycles as well as making the module layering more
straightforward. predicate.c's dependencies on TopTransactionResourceOwner
go away too.
I think this is a longstanding bug, but there's no evidence that it's more
than a latent bug, so it doesn't seem worth any risk of back-patching.
This is not actually used anywhere yet, but it gets the basic
infrastructure in place. It is fairly likely that there are bugs, and
support for some important platforms may be missing, so we'll need to
refine this as we go along.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
At least on this architecture, it's very important to spin on a
non-atomic instruction and only retry the atomic once it appears
that it will succeed. To fix this, split TAS() into two macros:
TAS(), for trying to grab the lock the first time, and TAS_SPIN(),
for spinning until we get it. TAS_SPIN() defaults to same as TAS(),
but we can override it when we know there's a better way.
It's likely that some of the other cases in s_lock.h require
similar treatment, but this is the only one we've got conclusive
evidence for at present.
Perhaps we ought to add some other kind of documentation here instead,
but for now let's get rid of this woefully obsolete description of the
sinval machinery.
This makes it clearer that the error message is perhaps not supposed
to be understood by users, and it also makes it somewhat clearer that
it was not accidentally omitted from translation.
Idea from Heikki Linnakangas, except that we don't mark "Reason code"
for translation at this point, because that would make the
implementation too cumbersome.
In pursuit of this (and with the expectation that WaitLatch will be needed
in more places), convert the latch field that was already added to PGPROC
for sync rep into a generic latch that is activated for all PGPROC-owning
processes, and change many of the standard backend signal handlers to set
that latch when a signal happens. This will allow WaitLatch callers to be
wakened properly by these signals.
In passing, fix a whole bunch of signal handlers that had been hacked to do
things that might change errno, without adding the necessary save/restore
logic for errno. Also make some minor fixes in unix_latch.c, and clean
up bizarre and unsafe scheme for disowning the process's latch. Much of
this has to be back-patched into 9.1.
Peter Geoghegan, with additional work by Tom
Improve the documentation around weak-memory-ordering risks, and do a pass
of general editorialization on the comments in the latch code. Make the
Windows latch code more like the Unix latch code where feasible; in
particular provide the same Assert checks in both implementations.
Fix poorly-placed WaitLatch call in syncrep.c.
This patch resolves, for the moment, concerns around weak-memory-ordering
bugs in latch-related code: we have documented the restrictions and checked
that existing calls meet them. In 9.2 I hope that we will install suitable
memory barrier instructions in SetLatch/ResetLatch, so that their callers
don't need to be quite so careful.
Instead of entering them on transaction startup, we materialize them
only when someone wants to wait, which will occur only during CREATE
INDEX CONCURRENTLY. In Hot Standby mode, the startup process must also
be able to probe for conflicting VXID locks, but the lock need never be
fully materialized, because the startup process does not use the normal
lock wait mechanism. Since most VXID locks never need to touch the
lock manager partition locks, this can significantly reduce blocking
contention on read-heavy workloads.
Patch by me. Review by Jeff Davis.
This kluge was inserted in a spot apparently chosen at random: the lock
manager's state is not yet fully set up for the wait, and in particular
LockWaitCancel hasn't been armed by setting lockAwaited, so the ProcLock
will not get cleaned up if the ereport is thrown. This seems to not cause
any observable problem in trivial test cases, because LockReleaseAll will
silently clean up the debris; but I was able to cause failures with tests
involving subtransactions.
Fixes breakage induced by commit c85c941470.
Back-patch to all affected branches.
It was initialized in the wrong place and to the wrong value. With bad
luck this could result in incorrect query-cancellation failures in hot
standby sessions, should a HS backend be holding pin on buffer number 1
while trying to acquire a lock.
Testing shows that the overhead of acquiring and releasing
SInvalReadLock and msgNumLock on high-core count boxes can waste a lot
of CPU time and hurt performance. This patch adds a per-backend flag
that allows us to skip all that locking in most cases. Further
testing shows that this improves performance even when sinval traffic
is very high.
Patch by me. Review and testing by Noah Misch.
1. In GetLockStatusData, avoid initializing instance before we've ensured
that the array is large enough. Otherwise, if repalloc moves the block
around, we're hosed.
2. Add the word "Relation" to the name of some identifiers, to avoid
assuming that the fast-path mechanism will only ever apply to relations
(though these particular parts certainly will). Some of the macros
could possibly use similar treatment, but the names are getting awfully
long already.
3. Add a missing word to comment in AtPrepare_Locks().
When an AccessShareLock, RowShareLock, or RowExclusiveLock is requested
on an unshared database relation, and we can verify that no conflicting
locks can possibly be present, record the lock in a per-backend queue,
stored within the PGPROC, rather than in the primary lock table. This
eliminates a great deal of contention on the lock manager LWLocks.
This patch also refactors the interface between GetLockStatusData() and
pg_lock_status() to be a bit more abstract, so that we don't rely so
heavily on the lock manager's internal representation details. The new
fast path lock structures don't have a LOCK or PROCLOCK structure to
return, so we mustn't depend on that for purposes of listing outstanding
locks.
Review by Jeff Davis.
Move FileClose's decrement of temporary_files_size up, so that it will be
executed even if elog() throws an error. This is reasonable since if the
unlink() fails, the fact the file is still there is not our fault, and we
are going to forget about it anyhow. So we won't count it against
temp_file_limit anymore.
Update fileSize and temporary_files_size correctly in FileTruncate.
We probably don't have any places that truncate temp files, but fd.c
surely should not assume that.
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
detect postmaster death. Postmaster keeps the write-end of the pipe open,
so when it dies, children get EOF in the read-end. That can conveniently
be waited for in select(), which allows eliminating some of the polling
loops that check for postmaster death. This patch doesn't yet change all
the loops to use the new mechanism, expect a follow-on patch to do that.
This changes the interface to WaitLatch, so that it takes as argument a
bitmask of events that it waits for. Possible events are latch set, timeout,
postmaster death, and socket becoming readable or writeable.
The pipe method behaves slightly differently from the kill() method
previously used in PostmasterIsAlive() in the case that postmaster has died,
but its parent has not yet read its exit code with waitpid(). The pipe
returns EOF as soon as the process dies, but kill() continues to return
true until waitpid() has been called (IOW while the process is a zombie).
Because of that, change PostmasterIsAlive() to use the pipe too, otherwise
WaitLatch() would return immediately with WL_POSTMASTER_DEATH, while
PostmasterIsAlive() would claim it's still alive. That could easily lead to
busy-waiting while postmaster is in zombie state.
Peter Geoghegan with further changes by me, reviewed by Fujii Masao and
Florian Pflug.
on the finished list, and we shouldn't flag it as a potential conflict
if so. We can also skip adding a doomed transaction to the list of
possible conflicts because we know it won't commit.
Dan Ports and Kevin Grittner.
transactions might not match the order the work done in those transactions
become visible to others. The logic in SSI, however, assumed that it does.
Fix that by having two sequence numbers for each serializable transaction,
one taken before a transaction becomes visible to others, and one after it.
This is easier than trying to make the the transition totally atomic, which
would require holding ProcArrayLock and SerializableXactHashLock at the same
time. By using prepareSeqNo instead of commitSeqNo in a few places where
commit sequence numbers are compared, we can make those comparisons err on
the safe side when we don't know for sure which committed first.
Per analysis by Kevin Grittner and Dan Ports, but this approach to fix it
is different from the original patch.
The value when BLCKSZ = 8192 is unchanged, but with larger-than-normal
block sizes we might need to crank things back a bit, as we'll have
more entries per page than normal in that case.
Kevin Grittner
