The messages were using 'two-phase transaction' at some places and
'prepared transaction' at other places. Make them consistently use
'prepared transaction'.
Reported-by: Ekaterina Kiryanova
Author: Peter Smith
Reviewed by: Amit Kapila
Backpatch-through: 15
Discussion: https://postgr.es/m/745414e7-efb2-a6ae-5b83-fcbdf35aabc8@postgrespro.ru
This commit addresses a few things around GUCs:
- The TCP-related parameters (the four tcp_keepalives_* and
client_connection_check_interval are listed in postgresql.conf.sample in
a subsection called "TCP settings" of "CONNECTIONS AND AUTHENTICATION",
but they did not have their own group name in guc.c.
- enable_group_by_reordering, stats_fetch_consistency and
recovery_prefetch had an inconsistent description, missing a dot at the
end.
- In postgresql.conf.sample, "Process title" should not have a section
of its own, but it should be a subsection of "REPORTING AND LOGGING".
This impacts the contents of pg_settings, which could be seen as a
compatibility break, so no backpatch is done. This is similar to the
cleanup done in a55a984.
Author: Shinya Kato
Discussion: https://postgr.es/m/5e0c9c608624eafbba910c344282cb14@oss.nttdata.com
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
symlink() and readlink() are in SUSv2 and all targeted Unix systems have
them. We have partial emulation on Windows. Code that raised runtime
errors on systems without it has been dead for years, so we can remove
that and also references to such systems in the documentation.
Define HAVE_READLINK and HAVE_SYMLINK macros on Unix. Our Windows
replacement functions based on junction points can't be used for
relative paths or for non-directories, so the macros can be used to
check for full symlink support. The places that deal with tablespaces
can just use symlink functions without checking the macros. (If they
did check the macros, they'd need to provide an #else branch with a
runtime or compile time error, and it'd be dead code.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Previously, a byte with the high bit set was just transmitted
as-is by charin() and charout(). This is problematic if the
database encoding is multibyte, because the result of charout()
won't be validly encoded, which breaks various stuff that
expects all text strings to be validly encoded. We've
previously decided to enforce encoding validity rather than try
to individually harden each place that might have a problem with
such strings, so it's time to do something about "char".
To fix, represent high-bit-set characters as \ooo (backslash
and three octal digits), following the ancient "escape" format
for bytea. charin() will continue to accept the old way as well,
though that is only reachable in single-byte encodings.
Add some test cases just so there is coverage for this code.
We'll otherwise leave this question undocumented as it was before,
because we don't really want to encourage end-user use of "char".
For the moment, back-patch into v15 so that this change appears
in 15beta3. If there's not great pushback we should consider
absorbing this change into the older branches.
Discussion: https://postgr.es/m/2318797.1638558730@sss.pgh.pa.us
These two new options can be used to either process all tables in
specific schemas or to skip processing all tables in specific
schemas. This change also refactors the handling of invalid
combinations of command-line options to a new helper function.
Author: Gilles Darold
Reviewed-by: Justin Pryzby, Nathan Bossart and Michael Paquier.
Discussion: https://postgr.es/m/929fbf3c-24b8-d454-811f-1d5898ab3e91%40migops.com
There wasn't an especially nice way to read all of a file while
passing missing_ok = true. Add an additional overloaded variant
to support that use-case.
While here, refactor the C code to avoid a rats-nest of PG_NARGS
checks, instead handling the argument collection in the outer
wrapper functions. It's a bit longer this way, but far more
straightforward.
(Upon looking at the code coverage report for genfile.c, I was
impelled to also add a test case for pg_stat_file() -- tgl)
Kyotaro Horiguchi
Discussion: https://postgr.es/m/20220607.160520.1984541900138970018.horikyota.ntt@gmail.com
... when it applies to partitioned relations. This is almost the
opposite of 0c06534bd6, which removed references to "partition" in
favour of "child".
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/20220525013248.GO19626@telsasoft.com
After commit 089480c07, it's necessary for background worker entry
points to be marked PGDLLEXPORT, else they aren't findable by
LookupBackgroundWorkerFunction(). Since pg_prewarm lacks any
regression tests, it's not surprising its worker entry points were
overlooked. (A quick search turned up no other such oversights.)
I added some documentation pointing out the need for this, too.
Robins Tharakan and Tom Lane
CAEP4nAzndnQv3-1QKb=D-hLoK3Rko12HHMFHHtdj2GQAUXO3gw@mail.gmail.com
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
This addresses a couple of bugs in the REINDEX grammar, introduced by
83011ce:
- A name was never specified for DATABASE/SYSTEM, even if the query
included one. This caused such REINDEX queries to always work with any
object name, but we should complain if the object name specified does
not match the name of the database we are connected to. A test is added
for this case in the main regression test suite, provided by Álvaro.
- REINDEX SYSTEM CONCURRENTLY [name] was getting rejected in the
parser. Concurrent rebuilds are not supported for catalogs but the
error provided at execution time is more helpful for the user, and
allowing this flavor results in a simplification of the parsing logic.
- REINDEX DATABASE CONCURRENTLY was rebuilding the index in a
non-concurrent way, as the option was not being appended correctly in
the list of DefElems in ReindexStmt (REINDEX (CONCURRENTLY) DATABASE was
working fine. A test is added in the TAP tests of reindexdb for this
case, where we already have a REINDEX DATABASE CONCURRENTLY query
running on a small-ish instance. This relies on the work done in
2cbc3c1 for SYSTEM, but here we check if the OIDs of the index relations
match or not after the concurrent rebuild. Note that in order to get
this part to work, I had to tweak the tests so as the index OID and
names are saved separately. This change not affect the reliability or
of the coverage of the existing tests.
While on it, I have implemented a tweak in the grammar to reduce the
parsing by one branch, simplifying things even more.
Author: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/YttqI6O64wDxGn0K@paquier.xyz
The setting controls tha maximum length of the header line in expanded
format output. Possible settings are full, column, page, or an integer.
the default is full, the current behaviour, and in this case the header
line is the length of the widest line of output. column causes the
header to be truncated to the width of the first column, page causes it
to be truncated to the width of the terminal page, and an integer causes
it to be truncated to that value. If the full value is less than the
page or integer value no truncation occurs. If given without an argument
this option prints its current setting.
Platon Pronko, somewhat modified by me.
Discussion: https://postgr.es/m/f03d38a3-db96-a56e-d1bc-dbbc80bbde4d@gmail.com
We didn't explicitly say that random() uses a randomly-chosen seed
if you haven't called setseed(). Do so.
Also, remove ref/set.sgml's no-longer-accurate (and never very
relevant) statement that the seed value is multiplied by 2^31-1.
Back-patch to v12 where set.sgml's claim stopped being true.
The claim that we use a source of random bits as seed was debatable
before 4203842a1, too, so v12 seems like a good place to stop.
Per question from Carl Sopchak.
Discussion: https://postgr.es/m/f37bb937-9d99-08f0-4de7-80c91a3cfc2e@sopchak.me
We've long held the minimum at 3.80, but that's required more than
one workaround. Commit 0f39b70a6 broke it again, because it turns
out that exporting a target-specific variable didn't work in 3.80.
Considering that 3.81 is now old enough to get a driver's license,
and that the only remaining buildfarm member testing 3.80 (prairiedog)
is likely to be retired soon, let's just stop supporting 3.80.
Adjust docs and Makefile.global's minimum-version check to match.
There are a couple of comments in the Makefiles suggesting that
random things could be done differently after we desupport 3.80,
but I couldn't get excited about changing any of them right now.
Back-patch to v15, as 0f39b70a6 was.
Discussion: https://postgr.es/m/20220720172321.GL12702@telsasoft.com
This allows users to omit the statistics name in a CREATE STATISTICS
command, letting the system auto-generate a sensible, unique name,
putting the statistics object in the same schema as the table.
Simon Riggs, reviewed by Matthias van de Meent.
Discussion: https://postgr.es/m/CANbhV-FGD2d_C3zFTfT2aRfX_TaPSgOeKES58RLZx5XzQp5NhA@mail.gmail.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
In the docs, the GUC flags that pg_settings_get_flags() reported were
listed using <simplelist>. But the list was treated as separate lines
in the existing function table and didn't look good. For better view,
this commit separates the list from the table entry for
pg_settings_get_flags() and adds the table for it at the bottom of
the existing function table.
Author: Fujii Masao
Reviewed-by: Alvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/f093edf9-6e5a-b119-ee50-6a2c97c79ee8@oss.nttdata.com
Upcoming custom Table Access Methods (TableAM) need benchmarking. Despite
pgbench doesn't have an explicit option for TableAM specification, one can
specify it using PGOPTION environmental variable. The present commit documents
this way to specify TableAM for pgbench.
Discussion: https://postgr.es/m/CAC77N6ih%3DLbhZQXV76grEsaVQkBL464Y2Foqq9o%3Df4UBfEOfEQ%40mail.gmail.com
Author: Michel Pelletier, Alexander Korotkov
Reviewed-by: Justin Pryzby, Mason Sharp, Michael Paquier
This allows aliases for sub-SELECTs and VALUES clauses in the FROM
clause to be omitted.
This is an extension of the SQL standard, supported by some other
database systems, and so eases the transition from such systems, as
well as removing the minor inconvenience caused by requiring these
aliases.
Patch by me, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUCGCf82=hxd9N5n6xGHPyYpQnxW8HneeH+uP7yNALkWA@mail.gmail.com
Windows 10 gained support for flushing NTFS files with fdatasync()
semantics. The main advantage over open_datasync (in Windows API terms
FILE_FLAG_WRITE_THROUGH) is that the latter does not flush SATA drive
caches. The default setting is not changed, so users have to opt in to
this.
Discussion: https://postgr.es/m/CA%2BhUKGJZJVO%3DiX%2Beb-PXi2_XS9ZRqnn_4URh0NUQOwt6-_51xQ%40mail.gmail.com
Per discussion, this commit includes a couple of changes to these two
flavors of REINDEX:
* The grammar is changed to make the name of the object optional, hence
one can rebuild all the indexes of the wanted area by specifying only
"REINDEX DATABASE;" or "REINDEX SYSTEM;". Previously, the object name
was mandatory and had to match the name of the database on which the
command is issued.
* REINDEX DATABASE is changed to ignore catalogs, making this task only
possible with REINDEX SYSTEM. This is a historical change, but there
was no way to work only on the indexes of a database without touching
the catalogs. We have discussed more approaches here, like the addition
of an option to skip the catalogs without changing the original
behavior, but concluded that what we have here is for the best.
This builds on top of the TAP tests introduced in 5fb5b6c, showing the
change in behavior for REINDEX SYSTEM. reindexdb is updated so as we do
not issue an extra REINDEX SYSTEM when working on a database in the
non-concurrent case, something that was confusing when --concurrently
got introduced, so this simplifies the code.
Author: Simon Riggs
Reviewed-by: Ashutosh Bapat, Bernd Helmle, Álvaro Herrera, Cary Huang,
Michael Paquier
Discussion: https://postgr.es/m/CANbhV-H=NH6Om4-X6cRjDWfH_Mu1usqwkuYVp-hwdB_PSHWRfg@mail.gmail.com
Previously we displayed "DSMFillZeroWrite" while in posix_fallocate(),
because we shared the same wait event for "mmap" and "posix" DSM types.
Let's introduce a new wait event "DSMAllocate", to be more accurate.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220711174518.yldckniicknsxgzl%40awork3.anarazel.de
No members of the buildfarm are using this version of Visual Studio,
resulting in all the code cleaned up here as being mostly dead, and
VS2017 is the oldest version still supported.
More versions could be cut, but the gain would be minimal, while
removing only VS2013 has the advantage to remove from the core code all
the dependencies on the value defined by _MSC_VER, where compatibility
tweaks have accumulated across the years mostly around locales and
strtof(), so that's a nice isolated cleanup.
Note that this commit additionally allows a revert of 3154e16. The
versions of Visual Studio now supported range from 2015 to 2022.
Author: Michael Paquier
Reviewed-by: Juan José Santamaría Flecha, Tom Lane, Thomas Munro, Justin
Pryzby
Discussion: https://postgr.es/m/YoH2IMtxcS3ncWn+@paquier.xyz
Previously, the STORAGE specification was only available in ALTER
TABLE. This makes it available in CREATE TABLE as well.
Also make the code and the documentation for STORAGE and COMPRESSION
attributes consistent.
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: wenjing zeng <wjzeng2012@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/de83407a-ae3d-a8e1-a788-920eb334f25b@sigaev.ru
This moves the list of available languages from nls.mk into a separate
file called po/LINGUAS. Advantages:
- It keeps the parts notionally managed by programmers (nls.mk)
separate from the parts notionally managed by translators (LINGUAS).
- It's the standard practice recommended by the Gettext manual
nowadays.
- The Meson build system also supports this layout (and of course
doesn't know anything about our custom nls.mk), so this would enable
sharing the list of languages between the two build systems.
(The MSVC build system currently finds all po files by globbing, so it
is not affected by this change.)
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/557a9f5c-e871-edc7-2f58-a4140fb65b7b@enterprisedb.com
The following options are added to createuser:
* --valid-until to generate a VALID UNTIL clause for the role created.
* --bypassrls/--no-bypassrls for BYPASSRLS/NOBYPASSRLS.
* -m/--member to make the new role a member of an existing role, with an
extra ROLE clause generated. The clause generated overlaps with
-g/--role, but per discussion this was the most popular choice as option
name.
* -a/--admin for the addition of an ADMIN clause.
These option names are chosen to be completely new, so as they do not
impact anybody relying on the existing option set. Tests are added for
the new options and extended a bit, while on it, to cover more patterns
where quotes are added to various elements of the query generated.
Author: Shinya Kato
Reviewed-by: Nathan Bossart, Daniel Gustafsson, Robert Haas, Kyotaro
Horiguchi, David G. Johnston, Przemysław Sztoch
Discussion: https://postgr.es/m/69a9851035cf0f0477bcc5d742b031a3@oss.nttdata.com
Previously, ECPG could only cope with variable declarations whose
type names either weren't any SQL keyword, or were at least partially
reserved. If you tried to use something in the unreserved_keyword
category, you got a syntax error.
This is pretty awful, not only because it says right on the tin that
those words are not reserved, but because the set of such keywords
tends to grow over time. Thus, an ECPG program that was just fine
last year could fail when recompiled with a newer SQL grammar.
We had to work around this recently when STRING became a keyword,
but it's time for an actual fix instead of a band-aid.
To fix, borrow a trick from C parsers and make the lexer's behavior
change when it sees a word that is known as a typedef. This is not
free of downsides: if you try to use such a name as a SQL keyword
in EXEC SQL later in the program, it won't be recognized as a SQL
keyword, leading to a syntax error there instead. So in a real
sense this is just trading one hazard for another. But there is an
important difference: with this, whether your ECPG program works
depends only on what typedef names and SQL commands are used in the
program text. If it compiles today it'll still compile next year,
even if more words have become SQL keywords.
Discussion: https://postgr.es/m/3661437.1653855582@sss.pgh.pa.us
Now some foreign data wrappers support TRUNCATE command.
So it's useful to support TRUNCATE triggers on foreign tables for
audit logging or for preventing undesired truncation.
Author: Yugo Nagata
Reviewed-by: Fujii Masao, Ian Lawrence Barwick
Discussion: https://postgr.es/m/20220630193848.5b02e0d6076b86617a915682@sraoss.co.jp