data type. This patch takes the approach of allowing an optional hyphen after
each group of four hex digits.
Author: Robert Haas <robertmhaas@gmail.com>
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
RETURNING clause, not just a SELECT as formerly.
A side effect of this patch is that when a set-returning SQL function is used
in a FROM clause, performance is improved because the output is collected into
a tuplestore within the function, rather than using the less efficient
value-per-call mechanism.
backwards scan could actually happen. In particular, pass a flag to
materialize-mode SRFs that tells them whether they need to require random
access. In passing, also suppress unneeded backward-scan overhead for a
Portal's holdStore tuplestore. Per my proposal about reducing I/O costs for
tuplestores.
via a tuplestore instead of value-per-call. Refactor a few things to reduce
ensuing code duplication with nodeFunctionscan.c. This represents the
reasonably noncontroversial part of my proposed patch to switch SQL functions
over to returning tuplestores. For the moment, SQL functions still do things
the old way. However, this change enables PL SRFs to be called in targetlists
(observe changes in plperl regression results).
written to temp files by tuplesort.c and tuplestore.c. This saves 2 bytes per
row for 32-bit machines, and 6 bytes per row for 64-bit machines, which seems
worth the slight additional uglification of the tuple read/write routines.
recursion when we are unable to convert a localized error message to the
client's encoding. We've been over this ground before, but as reported by
Ibrar Ahmed, it still didn't work in the case of conversion failures for
the conversion-failure message itself :-(. Fix by installing a "circuit
breaker" that disables attempts to localize this message once we get into
recursion trouble.
Patch all supported branches, because it is in fact broken in all of them;
though I had to add some missing translations to the older branches in
order to expose the failure in the particular test case I was using.
inputs is unique or nearly so), make eqjoinsel() clamp the ndistinct estimates
to be not more than the estimated number of rows coming from the input
relations. This allows the estimate to change in response to the selectivity
of restriction conditions on the inputs.
This is a pretty narrow patch and maybe we should be more aggressive about
similarly clamping ndistinct in other cases; but I'm worried about
double-counting the effects of the restriction conditions. However, it seems
to help for the case exhibited by Grzegorz Jaskiewicz (antijoin against a
small subset of a relation), so let's try this for awhile.
that represent some expression that we desire to compute below the top level
of the plan, and then let that value "bubble up" as though it were a plain
Var (ie, a column value).
The immediate application is to allow sub-selects to be flattened even when
they are below an outer join and have non-nullable output expressions.
Formerly we couldn't flatten because such an expression wouldn't properly
go to NULL when evaluated above the outer join. Now, we wrap it in a
PlaceHolderVar and arrange for the actual evaluation to occur below the outer
join. When the resulting Var bubbles up through the join, it will be set to
NULL if necessary, yielding the correct results. This fixes a planner
limitation that's existed since 7.1.
In future we might want to use this mechanism to re-introduce some form of
Hellerstein's "expensive functions" optimization, ie place the evaluation of
an expensive function at the most suitable point in the plan tree.
the timestamp types. Turns out this doesn't even reduce the available
range of dates, since the restriction to dates that work for Julian-date
arithmetic is much tighter than the int32 range anyway. Per a longstanding
TODO item.
pseudo-type record[] to represent arrays of possibly-anonymous composite
types. Since composite datums carry their own type identification, no
extra knowledge is needed at the array level.
The main reason for doing this right now is that it is necessary to support
the general case of detection of cycles in recursive queries: if you need to
compare more than one column to detect a cycle, you need to compare a ROW()
to an array built from ROW()s, at least if you want to do it as the spec
suggests. Add some documentation and regression tests concerning the cycle
detection issue.
get_name_for_var_field didn't have enough context to interpret a reference to
a CTE query's output. Fixing this requires separate hacks for the regular
deparse case (pg_get_ruledef) and for the EXPLAIN case, since the available
context information is quite different. It's pretty nearly parallel to the
existing code for SUBQUERY RTEs, though. Also, add code to make sure we
qualify a relation name that matches a CTE name; else the CTE will mistakenly
capture the reference when reloading the rule.
In passing, fix a pre-existing problem with get_name_for_var_field not working
on variables in targetlists of SubqueryScan plan nodes. Although latent all
along, this wasn't a problem until we made EXPLAIN VERBOSE try to print
targetlists. To do this, refactor the deparse_context_for_plan API so that
the special case for SubqueryScan is all on ruleutils.c's side.
the column alias names of the RTE referenced by the Var to the RowExpr.
This is needed to allow ruleutils.c to correctly deparse FieldSelect nodes
referencing such a construct. Per my recent bug report.
Adding a field to RowExpr forces initdb (because of stored rules changes)
so this solution is not back-patchable; which is unfortunate because 8.2
and 8.3 have this issue. But it only affects EXPLAIN for some pretty odd
corner cases, so we can probably live without a solution for the back
branches.
relation forks. While the file names are not visible to users, for those
that do peek into the data directory, it's nice to have more descriptive
names. Per Greg Stark's suggestion.
machine produces zero (rather than the more usual minimum-possible-integer)
for the only possible overflow case. This has been seen to occur for at least
some word widths on some hardware, and it's cheap enough to check for
everywhere. Per Peter's analysis of buildfarm reports.
This could be back-patched, but in the absence of any gripes from the field
I doubt it's worth the trouble.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
name of a fork ('main' or 'fsm', at the moment) to pg_relation_size() to
get the size of a specific fork. Defaults to 'main', if none given.
While we're at it, modify pg_relation_size to take a regclass as argument,
instead of separate variants taking oid and name. This change is
transparent to typical use where the table name is passed as a string
literal, like pg_relation_size('table'), but will break queries like
pg_relation_size(namecol), where namecol is of type name. text-type input
still works, and using a non-schema-qualified table name is not very
reliable anyway, so this is unlikely to break anyone's queries in practice.
This facility replaces the former mark/restore support but is otherwise
upward-compatible with previous uses. It's expected to be needed for
single evaluation of CTEs and also for window functions, so I'm committing
it separately instead of waiting for either one of those patches to be
finished. Per discussion with Greg Stark and Hitoshi Harada.
Note: I removed nodeFunctionscan's mark/restore support, instead of bothering
to update it for this change, because it was dead code anyway.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
applied to expression indexes, not to plain relations. The original coding
in btcostestimate conflated the two cases, but it's not hard to use
get_relation_stats_hook instead when we're looking to the underlying relation.
(ie, has nothing to quote), rather than silently ignoring the character as has
been our historical behavior. This is required by SQL spec and should help
reduce the sort of user confusion seen in bug #4436. Per discussion.
This is not so much a bug fix as a definitional change, and it could break
existing applications; so not back-patched. It might deserve being mentioned
as an incompatibility in the 8.4 release notes.
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
interpreted as expected (the sign should affect months too), and get rid of
hard-wired assumption that unmarked signed values must be hours (if integers)
or seconds (if floats). The former was just a bug in my previous patch,
while the latter may have made sense at one time but seems illogical now
that we support determination of the units from typmod information.
Ron Mayer and myself.
we regenerate the SQL query text not merely the plan derived from it. This
is needed to handle contingencies such as renaming of a table or column
used in an FK. Pre-8.3, such cases worked despite the lack of replanning
(because the cached plan needn't actually change), so this is a regression.
Per bug #4417 from Benjamin Bihler.
value. This means that hash index lookups are always lossy and have to be
rechecked when the heap is visited; however, the gain in index compactness
outweighs this when the indexed values are wide. Also, we only need to
perform datatype comparisons when the hash codes match exactly, rather than
for every entry in the hash bucket; so it could also win for datatypes that
have expensive comparison functions. A small additional win is gained by
keeping hash index pages sorted by hash code and using binary search to reduce
the number of index tuples we have to look at.
Xiao Meng
This commit also incorporates Zdenek Kotala's patch to isolate hash metapages
and hash bitmaps a bit better from the page header datastructures.
and the literal syntax INTERVAL 'string' ... SECOND(n), as required by the
SQL standard. Our old syntax put (n) directly after INTERVAL, which was
a mistake, but will still be accepted for backward compatibility as well
as symmetry with the TIMESTAMP cases.
Change intervaltypmodout to show it in the spec's way, too. (This could
potentially affect clients, if there are any that analyze the typmod of an
INTERVAL in any detail.)
Also fix interval input to handle 'min:sec.frac' properly; I had overlooked
this case in my previous patch.
Document the use of the interval fields qualifier, which up to now we had
never mentioned in the docs. (I think the omission was intentional because
it didn't work per spec; but it does now, or at least close enough to be
credible.)
GetOldestXmin() instead of RecentGlobalXmin; this is safer because we do not
depend on the latter being correctly set elsewhere, and while it is more
expensive, this code path is not performance-critical. This is a real
risk for autovacuum, because it can execute whole cycles without doing
a single vacuum, which would mean that RecentGlobalXmin would stay at its
initialization value, FirstNormalTransactionId, causing a bogus value to be
inserted in pg_database. This bug could explain some recent reports of
failure to truncate pg_clog.
At the same time, change the initialization of RecentGlobalXmin to
InvalidTransactionId, and ensure that it's set to something else whenever
it's going to be used. Using it as FirstNormalTransactionId in HOT page
pruning could incur in data loss. InitPostgres takes care of setting it
to a valid value, but the extra checks are there to prevent "special"
backends from behaving in unusual ways.
Per Tom Lane's detailed problem dissection in 29544.1221061979@sss.pgh.pa.us
