The previous comment gave the impression that skipping OIDs before
FirstNormalObjectId was merely an optimization to avoid likely collisions.
In fact other parts of the system have been relying on this threshold to
detect system-created objects since commit 8e18d04d4d, so adjust the
wording.
Author: Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D33JASACeOayr_W3%3DCSjy2jiPxM-k89axu0akFbHdjnjA%40mail.gmail.com
We aren't very strict about keeping FSM up to date on WAL replay,
because per-page freespace values aren't critical in replicas (can't
write to heap in a replica; and if the replica is promoted, the values
would be updated by VACUUM anyway). However, VACUUM since 9.6 can skip
processing pages marked all-visible or all-frozen, and if such pages are
recorded in FSM with wrong values, those values are blindly propagated
to FSM's upper layers by VACUUM's FreeSpaceMapVacuum. (This rationale
assumes that crashes are not very frequent, because those would cause
outdated FSM to occur in the primary.)
Even when the FSM is outdated in standby, things are not too bad
normally, because, most per-page FSM values will be zero (other than
those propagated with the base-backup that created the standby); only
once the remaining free space is less than 0.2*BLCKSZ the per-page value
is maintained by WAL replay of heap ins/upd/del. However, if
wal_log_hints=on causes complete FSM pages to be propagated to a standby
via full-page images, many too-optimistic per-page values can end up
being registered in the standby.
Incorrect per-page values aren't critical in most cases, since an
inserter that is given a page that doesn't actually contain the claimed
free space will update FSM with the correct value, and retry until it
finds a usable page. However, if there are many such updates to do, an
inserter can spend a long time doing them before a usable page is found;
in a heavily trafficked insert-only table with many concurrent inserters
this has been observed to cause several second stalls, causing visible
application malfunction.
To fix this problem, it seems sufficient to have heap_xlog_visible
(replay of setting all-visible and all-frozen VM bits for a heap page)
update the FSM value for the page being processed. This fixes the
per-page counters together with making the page skippable to vacuum, so
when vacuum does FreeSpaceMapVacuum, the values propagated to FSM upper
layers are the correct ones, avoiding the problem.
While at it, apply the same fix to heap_xlog_clean (replay of tuple
removal by HOT pruning and vacuum). This makes any space freed by the
cleaning available earlier than the next vacuum in the promoted replica.
Backpatch to 9.6, where this problem was diagnosed on an insert-only
table with all-frozen pages, which were introduced as a concept in that
release. Theoretically it could apply with all-visible pages to older
branches, but there's been no report of that and it doesn't backpatch
cleanly anyway.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20180802172857.5skoexsilnjvgruk@alvherre.pgsql
Fix a small number of places that were testing the result of snprintf()
but doing so incorrectly. The right test for buffer overrun, per C99,
is "result >= bufsize" not "result > bufsize". Some places were also
checking for failure with "result == -1", but the standard only says
that a negative value is delivered on failure.
(Note that this only makes these places correct if snprintf() delivers
C99-compliant results. But at least now these places are consistent
with all the other places where we assume that.)
Also, make psql_start_test() and isolation_start_test() check for
buffer overrun while constructing their shell commands. There seems
like a higher risk of overrun, with more severe consequences, here
than there is for the individual file paths that are made elsewhere
in the same functions, so this seemed like a worthwhile change.
Also fix guc.c's do_serialize() to initialize errno = 0 before
calling vsnprintf. In principle, this should be unnecessary because
vsnprintf should have set errno if it returns a failure indication ...
but the other two places this coding pattern is cribbed from don't
assume that, so let's be consistent.
These errors are all very old, so back-patch as appropriate. I think
that only the shell command overrun cases are even theoretically
reachable in practice, but there's not much point in erroneous error
checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
C99 says that the result should be the number of bytes that would have
been emitted given a large enough buffer, not the number we actually
were able to put in the buffer. It's time to make our substitute
implementation comply with that. Not doing so results in inefficiency
in buffer-enlargement cases, and also poses a portability hazard for
third-party code that might expect C99-compliant snprintf behavior
within Postgres.
In passing, remove useless tests for str == NULL; neither C99 nor
predecessor standards ever allowed that except when count == 0,
so I see no reason to expend cycles on making that a non-crash case
for this implementation. Also, don't waste a byte in pg_vfprintf's
local I/O buffer; this might have performance benefits by allowing
aligned writes during flushbuffer calls.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
Commit 244142d32a only tested for the
pg_controldata output for primary servers, but standby servers have
different "Database cluster state" output, so check for that too.
Diagnosed-by: Michael Paquier
Discussion: https://postgr.es/m/20180810164240.GM13638@paquier.xyz
Backpatch-through: 9.3
Commit 5f374fe7a attempted to turn the connect_timeout from an overall
maximum time limit into a per-host limit, but it didn't do a great job of
that. The timer would only get restarted if we actually detected timeout
within connectDBComplete(), not if we changed our attention to a new host
for some other reason. In that case the old timeout continued to run,
possibly causing a premature timeout failure for the new host.
Fix that, and also tweak the logic so that if we do get a timeout,
we advance to the next available IP address, not to the next host name.
There doesn't seem to be a good reason to assume that all the IP
addresses supplied for a given host name will necessarily fail the
same way as the current one. Moreover, this conforms better to the
admittedly-vague documentation statement that the timeout is "per
connection attempt". I changed that to "per host name or IP address"
to be clearer. (Note that reconnections to the same server, such as for
switching protocol version or SSL status, don't get their own separate
timeout; that was true before and remains so.)
Also clarify documentation about the interpretation of connect_timeout
values less than 2.
This seems like a bug, so back-patch to v10 where this logic came in.
Tom Lane, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/5735.1533828184@sss.pgh.pa.us
Commit dafa084, added in 10, made the removal of temporary orphaned
tables more aggressive. This commit makes an extra step into the
aggressiveness by adding a flag in each backend's MyProc which tracks
down any temporary namespace currently in use. The flag is set when the
namespace gets created and can be reset if the temporary namespace has
been created in a transaction or sub-transaction which is aborted. The
flag value assignment is assumed to be atomic, so this can be done in a
lock-less fashion like other flags already present in PGPROC like
databaseId or backendId, still the fact that the temporary namespace and
table created are still locked until the transaction creating those
commits acts as a barrier for other backends.
This new flag gets used by autovacuum to discard more aggressively
orphaned tables by additionally checking for the database a backend is
connected to as well as its temporary namespace in-use, removing
orphaned temporary relations even if a backend reuses the same slot as
one which created temporary relations in a past session.
The base idea of this patch comes from Robert Haas, has been written in
its first version by Tsunakawa Takayuki, then heavily reviewed by me.
Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8A4DC6@G01JPEXMBYT05
Backpatch: 11-, as PGPROC gains a new flag and we don't want silent ABI
breakages on already released versions.
Currently, we release the asynchronous resources as soon as it is evident
that no more rows will be needed e.g. when a Limit is filled. This can be
problematic especially for custom and foreign scans where we can scan
backward. Fix that by disallowing the shutting down of resources in such
cases.
Reported-by: Robert Haas
Analysed-by: Robert Haas and Amit Kapila
Author: Amit Kapila
Reviewed-by: Robert Haas
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
Multiple calls to XMLTABLE in a query (e.g. laterally applying it to a
table with an xml column, an important use-case) were leaking large
amounts of memory into the per-query context, blowing up memory usage.
Repair by reorganizing memory context usage in nodeTableFuncscan; use
the usual per-tuple context for row-by-row evaluations instead of
perValueCxt, and use the explicitly created context -- renamed from
perValueCxt to perTableCxt -- for arguments and state for each
individual table-generation operation.
Backpatch to PG10 where this code was introduced.
Original report by IRC user begriffs; analysis and patch by me.
Reviewed by Tom Lane and Pavel Stehule.
Discussion: https://postgr.es/m/153394403528.10284.7530399040974170549@wrigleys.postgresql.org
This reverts commit 3a60c8ff89. Buildfarm
results show that that caused a whole bunch of new warnings on platforms
where gcc believes the local printf to be non-POSIX-compliant. This
problem outweighs the hypothetical-anyway possibility of getting warnings
for misuse of %m. We could use gnu_printf archetype when we've substituted
src/port/snprintf.c, but that brings us right back to the problem of not
getting warnings for %m.
A possible answer is to attack it in the other direction by insisting
that %m support be included in printf's feature set, but that will take
more investigation. In the meantime, revert the previous change, and
update the comment for PGAC_C_PRINTF_ARCHETYPE to more fully explain
what's going on.
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
The pump_nb() step might've already received the desired data, so we must
check for that at the top of the loop not the bottom. Otherwise, the
call to pump() will sit with nothing to do until the timeout elapses.
pump_until then falls out with apparent success ... but the timeout has
been used up, causing the next call of pump_until to report a timeout
failure. I believe this explains the intermittent timeout failures
we've seen in the buildfarm ever since this test went in. I was able
to reproduce the problem on gaur semi-repeatably, and this appears to
fix it.
In passing, remove a duplicate assignment, fix one stdin-assignment to
look like the rest, and document the test's dependency on test_decoding.
When considering a partitioning parent rel, we should stop processing that
subroot as soon as we've done adjust_appendrel_attrs and any securityQuals
updates. The rest of this is unnecessary, and indeed adding duplicate
subquery RTEs to the subroot is *wrong*. As the code stood, the children
of that partition ended up with two sets of copied subquery RTEs, confusing
matters greatly. Even more hilarity ensued if all of the children got
excluded by constraint exclusion, so that the extra RTEs didn't make it
back into the parent rtable.
Per fuzz testing by Andreas Seltenreich. Back-patch to v11 where this
got broken (by commit 0a480502b, it looks like).
Discussion: https://postgr.es/m/87va8g7vq0.fsf@ansel.ydns.eu
It's often unsafe to reference errno within an elog/ereport call, because
there are a lot of sub-functions involved and they might not all preserve
errno. (This is why we support the %m format spec: it works off a value
of errno captured before we execute any potentially-unsafe functions in
the arguments.) Therefore, we have a project policy not to use errno
there.
This patch adds a hack to cause an (admittedly obscure) compiler error
for such unsafe usages. With the current code, the error will only be seen
on Linux, macOS, and FreeBSD, but that should certainly be enough to catch
mistakes in the buildfarm if they somehow get missed earlier.
In addition, fix some places in src/common/exec.c that trip the error.
I think these places are actually all safe, but it's simple enough to
avoid the error by capturing errno manually, and doing so is good
future-proofing in case these call sites get any more complicated.
Thomas Munro (exec.c fixes by me)
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
The elog/ereport family of functions certainly support the %m format spec,
because they implement it "by hand". But elsewhere we have printf wrappers
that might or might not allow it depending on whether the platform's printf
does. (Most non-glibc versions don't, and notably, src/port/snprintf.c
doesn't.) Hence, rather than using the gnu_printf format archetype
interchangeably for all these functions, use it only for elog/ereport.
This will allow us to get compiler warnings for mistakes like the ones
fixed in commit a13b47a59, at least on platforms where printf doesn't
take %m and gcc is correctly configured to know it. (Unfortunately,
that won't happen on Linux, nor on macOS according to my testing.
It remains to be seen what the buildfarm's gcc-on-Windows animals will
think of this, but we may well have to rely on less-popular platforms
to warn us about unportable code of this kind.)
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
These changes were put in at some stage of the development process, but
are unnecessary and should not have made it into the final patch. Mea
culpa.
Per gripe from Andreas Freund
Backpatch to REL_11_STABLE
Commit 9da0cc3528, which introduced parallel CREATE INDEX, failed to
propagate relmapper.c backend local cache state to parallel worker
processes. This could result in parallel index builds against mapped
catalog relations where the leader process (participating as a worker)
scans the new, pristine relfilenode, while worker processes scan the
obsolescent relfilenode. When this happened, the final index structure
was typically not consistent with the owning table's structure. The
final index structure could contain entries formed from both heap
relfilenodes. Only rebuilds on mapped catalog relations that occur as
part of a VACUUM FULL or CLUSTER could become corrupt in practice, since
their mapped relation relfilenode swap is what allows the inconsistency
to arise.
On master, fix the problem by propagating the required relmapper.c
backend state as part of standard parallel initialization (Cf. commit
29d58fd3). On v11, simply disallow builds against mapped catalog
relations by deeming them parallel unsafe.
Author: Peter Geoghegan
Reported-By: "death lock"
Reviewed-By: Tom Lane, Amit Kapila
Bug: #15309
Discussion: https://postgr.es/m/153329671686.1405.18298309097348420351@wrigleys.postgresql.org
Backpatch: 11-, where parallel CREATE INDEX was introduced.
Commit bcbd94080 didn't bother to fix up a comment it had falsified.
Also, const-ify choose_dsm_implementation(), since what it's returning
is always a constant string; pickier compilers would warn about this.
A caller of TRUNCATE could previously queue for an access exclusive lock
on a relation it may not have permission to truncate, potentially
interfering with users authorized to work on it. This can be very
intrusive depending on the lock attempted to be taken. For example,
pg_authid could be blocked, preventing any authentication attempt to
happen on a PostgreSQL instance.
This commit fixes the case of TRUNCATE so as RangeVarGetRelidExtended is
used with a callback doing the necessary ACL checks at an earlier stage,
avoiding lock queuing issues, so as an immediate failure happens for
unprivileged users instead of waiting on a lock that would not be
taken.
This is rather similar to the type of work done in cbe24a6 for CLUSTER,
and the code of TRUNCATE is this time refactored so as there is no
user-facing changes. As the commit for CLUSTER, no back-patch is done.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180806165816.GA19883@paquier.xyz
A database owner running a database-level REINDEX has the possibility to
also do the operation on shared system catalogs without being an owner
of them, which allows him to block resources it should not have access
to. The same goes for a schema owner. For example, PostgreSQL would go
unresponsive and even block authentication if a lock is waited for
pg_authid. This commit makes sure that a user running a REINDEX SYSTEM,
DATABASE or SCHEMA only works on the following relations:
- The user is a superuser
- The user is the table owner
- The user is the database/schema owner, only if the relation worked on
is not shared.
Robert has worded most the documentation changes, and I have coded the
core part.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier, Robert Haas
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180805211059.GA2185@paquier.xyz
Backpatch-through: 11- as the current behavior has been around for a
very long time and could be disruptive for already released branches.
This Assert thought that a given rel couldn't be both leaf and
non-leaf, but it turns out that in some unusual plan trees
that's wrong, so remove it.
The lack of testing for cases like that is quite concerning ---
there is little reason for confidence that there aren't other
bugs in the area. But developing a stable test case seems
rather difficult, and in any case we don't need this Assert.
David Rowley
Discussion: https://postgr.es/m/CAJGNTeOkdk=UVuMugmKL7M=owgt4nNr1wjxMg1F+mHsXyLCzFA@mail.gmail.com
GNUmakefile.in defined a macro "garbage" that seems to have been meant
as a suitable target for automatic "rm -rf" treatment, but it isn't
actually used anywhere (and indeed never was, AFAICT).
Moreover, we have concluded that the Makefiles shouldn't take it upon
themselves to remove files that aren't expected by-products of building,
so that doing anything like that would be against project policy anyway.
Hence, just remove the macro.
Grepping around finds another violation of that policy in ecpg/preproc,
so clean that up too.
Daniel Gustafsson (ecpg change by me)
Discussion: https://postgr.es/m/AFBEF63E-E19D-4EBB-9F08-4617CDC751ED@yesql.se
exit() is not async-signal safe. Even if the libc implementation is, 3rd
party libraries might have installed unsafe atexit() callbacks. After
receiving SIGQUIT, we really just want to exit as quickly as possible, so
we don't really want to run the atexit() callbacks anyway.
The original report by Jimmy Yih was a self-deadlock in startup_die().
However, this patch doesn't address that scenario; the signal handling
while waiting for the startup packet is more complicated. But at least this
alleviates similar problems in the SIGQUIT handlers, like that reported
by Asim R P later in the same thread.
Backpatch to 9.3 (all supported versions).
Discussion: https://www.postgresql.org/message-id/CAOMx_OAuRUHiAuCg2YgicZLzPVv5d9_H4KrL_OFsFP%3DVPekigA%40mail.gmail.com
Commit 1c2cb2744 added some code that tried to detect whether two
RelOptInfos were the "same" rel by pointer comparison; but it turns
out that inheritance_planner breaks that, through its shenanigans
with copying some relations forward into new subproblems. Compare
relid sets instead. Add a regression test case to exercise this
area.
Problem reported by Rushabh Lathia; diagnosis and fix by Amit Langote,
modified a bit by me.
Discussion: https://postgr.es/m/CAGPqQf3anJGj65bqAQ9edDr8gF7qig6_avRgwMT9MsZ19COUPw@mail.gmail.com
CreateUserMapping has a recordDependencyOnCurrentExtension call that's
been there since extensions were introduced (very possibly my fault).
However, there's no support anywhere else for user mappings as members
of extensions, nor are they listed as a possible member object type in
the documentation. Nor does it really seem like a good idea for user
mappings to belong to extensions when roles don't. Hence, remove the
bogus call.
(As we saw in bug #15310, the lack of any pg_dump support for this case
ensures that any such membership record would silently disappear during
pg_upgrade. So there's probably no need for us to do anything else
about cleaning up after this mistake.)
Discussion: https://postgr.es/m/27952.1533667213@sss.pgh.pa.us
Since commit c8e8b5a6e, this has been zeroed out using the wrong length.
In practice the length would always be too small, leading to not zeroing
the whole buffer rather than clobbering additional memory; and that's
pretty harmless, both because shmem would likely start out as zeroes
and because we'd reinitialize any given entry before use. Still,
it's bogus, so fix it.
Reported by Petru-Florin Mihancea (bug #15312)
Discussion: https://postgr.es/m/153363913073.1303.6518849192351268091@wrigleys.postgresql.org
pg_dump with --binary-upgrade must emit ALTER EXTENSION ADD commands
for all objects that are members of extensions. It forgot to do so for
event triggers, as per bug #15310 from Nick Barnes. Back-patch to 9.3
where event triggers were introduced.
Haribabu Kommi
Discussion: https://postgr.es/m/153360083872.1395.4593932457718151600@wrigleys.postgresql.org
The original coding here (which is, I believe, my fault) supposed that
it didn't need to concern itself with the possibility that one object
of a given type-priority has a namespace while another doesn't. But
that's not reliably true anymore, if it ever was; and if it does happen
then it's possible that DOTypeNameCompare returns self-inconsistent
comparison results. That leads to unspecified behavior in qsort()
and a resultant weird output order from pg_dump.
This should end up being only a cosmetic problem, because any ordering
constraints that actually matter should be enforced by the later
dependency-based sort. Still, it's a bug, so back-patch.
Report and fix by Jacob Champion, though I editorialized on his
patch to the extent of making NULL sort after non-NULL, for consistency
with our usual sorting definitions.
Discussion: https://postgr.es/m/CABAq_6Hw+V-Kj7PNfD5tgOaWT_-qaYkc+SRmJkPLeUjYXLdxwQ@mail.gmail.com
The logic in PQconnectPoll() did not take care to ensure that all of
a PGconn's internal state variables were reset before trying a new
connection attempt. If we got far enough in the connection sequence
to have changed any of these variables, and then decided to try a new
server address or server name, the new connection might be completed
with some state that really only applied to the failed connection.
While this has assorted bad consequences, the only one that is clearly
a security issue is that password_needed didn't get reset, so that
if the first server asked for a password and the second didn't,
PQconnectionUsedPassword() would return an incorrect result. This
could be leveraged by unprivileged users of dblink or postgres_fdw
to allow them to use server-side login credentials that they should
not be able to use.
Other notable problems include the possibility of forcing a v2-protocol
connection to a server capable of supporting v3, or overriding
"sslmode=prefer" to cause a non-encrypted connection to a server that
would have accepted an encrypted one. Those are certainly bugs but
it's harder to paint them as security problems in themselves. However,
forcing a v2-protocol connection could result in libpq having a wrong
idea of the server's standard_conforming_strings setting, which opens
the door to SQL-injection attacks. The extent to which that's actually
a problem, given the prerequisite that the attacker needs control of
the client's connection parameters, is unclear.
These problems have existed for a long time, but became more easily
exploitable in v10, both because it introduced easy ways to force libpq
to abandon a connection attempt at a late stage and then try another one
(rather than just giving up), and because it provided an easy way to
specify multiple target hosts.
Fix by rearranging PQconnectPoll's state machine to provide centralized
places to reset state properly when moving to a new target host or when
dropping and retrying a connection to the same host.
Tom Lane, reviewed by Noah Misch. Our thanks to Andrew Krasichkov
for finding and reporting the problem.
Security: CVE-2018-10915
There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.
This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.
This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.
I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.
Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.
In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.
Discussion: https://www.postgresql.org/message-id/ec787074-2305-c6f4-86aa-6902f98485a4%40iki.fi
When expanding an updatable view that is an INSERT's target, the rewriter
failed to rewrite Vars in the ON CONFLICT UPDATE clause. This accidentally
worked if the view was just "SELECT * FROM ...", as the transformation
would be a no-op in that case. With more complicated view targetlists,
this omission would often lead to "attribute ... has the wrong type" errors
or even crashes, as reported by Mario De Frutos Dieguez.
Fix by adding code to rewriteTargetView to fix up the data structure
correctly. The easiest way to update the exclRelTlist list is to rebuild
it from scratch looking at the new target relation, so factor the code
for that out of transformOnConflictClause to make it sharable.
In passing, avoid duplicate permissions checks against the EXCLUDED
pseudo-relation, and prevent useless view expansion of that relation's
dummy RTE. The latter is only known to happen (after this patch) in cases
where the query would fail later due to not having any INSTEAD OF triggers
for the view. But by exactly that token, it would create an unintended
and very poorly tested state of the query data structure, so it seems like
a good idea to prevent it from happening at all.
This has been broken since ON CONFLICT was introduced, so back-patch
to 9.5.
Dean Rasheed, based on an earlier patch by Amit Langote;
comment-kibitzing and back-patching by me
Discussion: https://postgr.es/m/CAFYwGJ0xfzy8jaK80hVN2eUWr6huce0RU8AgU04MGD00igqkTg@mail.gmail.com
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
This suite malfunctioned if the canonical name of "localhost" was
something other than "localhost", such as "localhost.localdomain". Use
hostaddr=127.0.0.1 and a fictitious host=, so the resolver's answers for
"localhost" don't affect the outcome. Back-patch to v11, which
introduced this test suite.
Discussion: https://postgr.es/m/20180801050903.GA1392916@rfd.leadboat.com
It's necessary to make sure that owning tables have a relcache
invalidation prior to advancing the command counter to make
newly-entered catalog tuples for the index visible. inval.c must be
able to maintain the consistency of the local caches in the event of
transaction abort. There is usually only a problem when CREATE INDEX
transactions abort, since there is a generic invalidation once we reach
index_update_stats().
This bug is of long standing. Problems were made much more likely by
the addition of parallel CREATE INDEX (commit 9da0cc3528), but it is
strongly suspected that similar problems can be triggered without
involving plan_create_index_workers(). (plan_create_index_workers()
triggers a relcache build or rebuild, which previously only happened in
rare edge cases.)
Author: Peter Geoghegan
Reported-By: Luca Ferrari
Diagnosed-By: Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAKoxK+5fVodiCtMsXKV_1YAKXbzwSfp7DgDqUmcUAzeAhf=HEQ@mail.gmail.com
Backpatch: 9.3-
\conninfo prints the results of PQhost() and some other libpq functions.
It used to override the PQhost() result with the hostaddr parameter if
that'd been given, but that's unhelpful when multiple hosts were listed
in the connection string. Furthermore, it seems unnecessary in the wake
of commit 1944cdc98, since PQhost does any useful substitution itself.
So let's just remove the extra code and print PQhost()'s result without
any editorialization.
Back-patch to v10, as 1944cdc98 (just) was.
Discussion: https://postgr.es/m/23287.1533227021@sss.pgh.pa.us
Commit 1944cdc98 changed PQhost() to return the hostaddr value when that
is specified and host isn't. This is a good idea in general, but
fe-auth.c and related files contain PQhost() calls for which it isn't.
Specifically, when we compare SSL certificates or other server identity
information to the host field, we do not want to use hostaddr instead;
that's not what's documented, that's not what happened pre-v10, and
it doesn't seem like a good idea.
Instead, we can just look at connhost[].host directly. This does what
we want in v10 and up; in particular, if neither host nor hostaddr
were given, the host field will be replaced with the default host name.
That seems useful, and it's likely the reason that these places were
coded to call PQhost() originally (since pre-v10, the stored field was
not replaced with the default).
Back-patch to v10, as 1944cdc98 (just) was.
Discussion: https://postgr.es/m/23287.1533227021@sss.pgh.pa.us
The buffer usage stats is accounted only for the execution phase of the
node. For Gather and Gather Merge nodes, such stats are accumulated at
the time of shutdown of workers which is done after execution of node due
to which we missed to account them for such nodes. Fix it by treating
nodes as running while we shut down them.
We can also miss accounting for a Limit node when Gather or Gather Merge
is beneath it, because it can finish the execution before shutting down
such nodes. So we allow a Limit node to shut down the resources before it
completes the execution.
In the passing fix the gather node code to allow workers to shut down as
soon as we find that all the tuples from the workers have been retrieved.
The original code use to do that, but is accidently removed by commit
01edb5c7fc.
Reported-by: Adrien Nayrat
Author: Amit Kapila and Robert Haas
Reviewed-by: Robert Haas and Andres Freund
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
In the leader backend, we don't track the buffer usage for ExecutorStart
phase whereas in worker backend we track it for ExecutorStart phase as
well. This leads to different value for buffer usage stats for the
parallel and non-parallel query. Change the code so that worker backend
also starts tracking buffer usage after ExecutorStart.
Author: Amit Kapila and Robert Haas
Reviewed-by: Robert Haas and Andres Freund
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
pmsignal.h uses sig_atomic_t in some builds, but relied on signal.h
having been included already. We could include it conditionally
but evidently that wouldn't save anything in practice and would
add more ugly macros, so let's just include signal.h always.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/4166.1533154074%40sss.pgh.pa.us
The previous coding here supposed that if run-time partitioning applied to
a particular Append/MergeAppend plan, then all child plans of that node
must be members of a single partitioning hierarchy. This is totally wrong,
since an Append could be formed from a UNION ALL: we could have multiple
hierarchies sharing the same Append, or child plans that aren't part of any
hierarchy.
To fix, restructure the related plan-time and execution-time data
structures so that we can have a separate list or array for each
partitioning hierarchy. Also track subplans that are not part of any
hierarchy, and make sure they don't get pruned.
Per reports from Phil Florent and others. Back-patch to v11, since
the bug originated there.
David Rowley, with a lot of cosmetic adjustments by me; thanks also
to Amit Langote for review.
Discussion: https://postgr.es/m/HE1PR03MB17068BB27404C90B5B788BCABA7B0@HE1PR03MB1706.eurprd03.prod.outlook.com
This was broken in commit 9c7d06d606, which inadvertently gave the
wrong value to fast_forward in one StartupDecodingContext call. Fix by
flipping the value. Add a test for the obvious error, namely trying to
initialize a replication slot with an nonexistent output plugin.
While at it, move the CreateDecodingContext call earlier, so that any
errors are reported before sending the CopyBoth message.
Author: Dave Cramer <davecramer@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADK3HHLVkeRe1v4P02-5hj55H3_yJg3AEtpXyEY5T3wuzO2jSg@mail.gmail.com
Some operations were being done in a longer-lived memory context,
causing intra-query leaks. It's not noticeable unless you're doing a
large COPY, but if you are, it eats enough memory to cause a problem.
Co-authored-by: Kohei KaiGai <kaigai@heterodb.com>
Co-authored-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAOP8fzYtVFWZADq4c=KoTAqgDrHWfng+AnEPEZccyxqxPVbbWQ@mail.gmail.com
Before v10, we always searched ~/.pgpass using the host parameter,
and nothing else, to match to the "hostname" field of ~/.pgpass.
(However, null host or host matching DEFAULT_PGSOCKET_DIR was replaced by
"localhost".) In v10, this got broken by commit 274bb2b38, repaired by
commit bdac9836d, and broken again by commit 7b02ba62e; in the code
actually shipped, we'd search with hostaddr if both that and host were
specified --- though oddly, *not* if only hostaddr were specified.
Since this is directly contrary to the documentation, and not
backwards-compatible, it's clearly a bug.
However, the change wasn't totally without justification, even though it
wasn't done quite right, because the pre-v10 behavior has arguably been
buggy since we added hostaddr. If hostaddr is specified and host isn't,
the pre-v10 code will search ~/.pgpass for "localhost", and ship that
password off to a server that most likely isn't local at all. That's
unhelpful at best, and could be a security breach at worst.
Therefore, rather than just revert to that old behavior, let's define
the behavior as "search with host if provided, else with hostaddr if
provided, else search for localhost". (As before, a host name matching
DEFAULT_PGSOCKET_DIR is replaced by localhost.) This matches the
behavior of the actual connection code, so that we don't pick up an
inappropriate password; and it allows useful searches to happen when
only hostaddr is given.
While we're messing around here, ensure that empty elements within a
host or hostaddr list select the same behavior as a totally-empty
field would; for instance "host=a,,b" is equivalent to "host=a,/tmp,b"
if DEFAULT_PGSOCKET_DIR is /tmp. Things worked that way in some cases
already, but not consistently so, which contributed to the confusion
about what key ~/.pgpass would get searched with.
Update documentation accordingly, and also clarify some nearby text.
Back-patch to v10 where the host/hostaddr list functionality was
introduced.
Discussion: https://postgr.es/m/30805.1532749137@sss.pgh.pa.us
CopyFrom allows multi-inserts to be used for non-partitioned tables, but
this was disabled for partitioned tables. The reason for this appeared
to be that the tuple may not belong to the same partition as the
previous tuple did. Not allowing multi-inserts here greatly slowed down
imports into partitioned tables. These could take twice as long as a
copy to an equivalent non-partitioned table. It seems wise to do
something about this, so this change allows the multi-inserts by
flushing the so-far inserted tuples to the partition when the next tuple
does not belong to the same partition, or when the buffer fills. This
improves performance when the next tuple in the stream commonly belongs
to the same partition as the previous tuple.
In cases where the target partition changes on every tuple, using
multi-inserts slightly slows the performance. To get around this we
track the average size of the batches that have been inserted and
adaptively enable or disable multi-inserts based on the size of the
batch. Some testing was done and the regression only seems to exist
when the average size of the insert batch is close to 1, so let's just
enable multi-inserts when the average size is at least 1.3. More
performance testing might reveal a better number for, this, but since
the slowdown was only 1-2% it does not seem critical enough to spend too
much time calculating it. In any case it may depend on other factors
rather than just the size of the batch.
Allowing multi-inserts for partitions required a bit of work around the
per-tuple memory contexts as we must flush the tuples when the next
tuple does not belong the same partition. In which case there is no
good time to reset the per-tuple context, as we've already built the new
tuple by this time. In order to work around this we maintain two
per-tuple contexts and just switch between them every time the partition
changes and reset the old one. This does mean that the first of each
batch of tuples is not allocated in the same memory context as the
others, but that does not matter since we only reset the context once
the previous batch has been inserted.
Author: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
This allows out-of-tree PLs and similar code to get access to
definitions needed to work with extension data types.
The following existing modules now install headers: contrib/cube,
contrib/hstore, contrib/isn, contrib/ltree, contrib/seg.
Discussion: https://postgr.es/m/87y3euomjh.fsf%40news-spur.riddles.org.uk
Commits 742869946 et al turn out to be a couple bricks shy of a load.
We were dumping the stored values of GUC_LIST_QUOTE variables as they
appear in proconfig or setconfig catalog columns. However, although that
quoting rule looks a lot like SQL-identifier double quotes, there are two
critical differences: empty strings ("") are legal, and depending on which
variable you're considering, values longer than NAMEDATALEN might be valid
too. So the current technique fails altogether on empty-string list
entries (as reported by Steven Winfield in bug #15248) and it also risks
truncating file pathnames during dump/reload of GUC values that are lists
of pathnames.
To fix, split the stored value without any downcasing or truncation,
and then emit each element as a SQL string literal.
This is a tad annoying, because we now have three copies of the
comma-separated-string splitting logic in varlena.c as well as a fourth
one in dumputils.c. (Not to mention the randomly-different-from-those
splitting logic in libpq...) I looked at unifying these, but it would
be rather a mess unless we're willing to tweak the API definitions of
SplitIdentifierString, SplitDirectoriesString, or both. That might be
worth doing in future; but it seems pretty unsafe for a back-patched
bug fix, so for now accept the duplication.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/7585.1529435872@sss.pgh.pa.us
In commit 84940644de, bms_add_range was added with an API to fail with
an error if an empty range was specified. This seems arbitrary and
unhelpful, so turn that case into a no-op instead. Callers that require
further verification on the arguments or result can apply them by
themselves.
This fixes the bug that partition pruning throws an API error for a case
involving the default partition of a default partition, as in the
included test case.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/16590.1532622503@sss.pgh.pa.us
"make installcheck" and some related cases, when invoked from the toplevel
directory, start out by doing "make all" in src/test/regress. Since that's
one make recursion level down, the submake-generated-headers target will
do nothing, causing us to fail to create/update generated headers before
building pg_regress. This is, I believe, a new failure mode induced by
commit 3b8f6e75f, so let's fix it. To do so, we have to invoke
submake-generated-headers at the top level.
Discussion: https://postgr.es/m/0401efec-68f1-679d-3ea3-21d4e8dd11af@gmail.com
pg_dump knew about printing ALTER TABLE ... REPLICA IDENTITY USING INDEX
for indexes declared as indexes, but it failed to print that for indexes
declared as unique or primary-key constraints. Per report from Achilleas
Mantzios.
This has been broken since the feature was introduced, AFAICS.
Back-patch to 9.4.
Discussion: https://postgr.es/m/1e6cc5ad-b84a-7c07-8c08-a4d0c3cdc938@matrix.gatewaynet.com
This allows querying the SSL implementation used on the server side.
It's analogous to using PQsslAttribute(conn, "library") in libpq.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Perpendicular lines always intersect, so the line_interpt_line() return
value in line_closept_point() was used only in an assertion, triggering
compiler warnings in non-assert builds.
Commit a7dc63d904 inadvertedly removed this bit originally introduced
by 43fe90f66a, causing regression test failures on some platforms,
due to producing {1,-1,-0} instead of {1,-1,0}.
The recheck option became a no-op as ClusterOption failed to set proper
values for each element. There was a second code path where local
options got overwritten.
Both issues have been spotted by Coverity.
Commit 5770172cb0 documented secure schema
usage, and that advice suffices for using unqualified names securely.
Document, in typeconv-func primarily, the additional issues that arise
with qualified names. Back-patch to 9.3 (all supported versions).
Reviewed by Jonathan S. Katz.
Discussion: https://postgr.es/m/20180721012446.GA1840594@rfd.leadboat.com
Some data types under adt/ have separate header files, but most simple
ones do not, and their public functions are defined in builtins.h. As
the patches improving geometric types will require making additional
functions public, this seems like a good opportunity to create a header
for floats types.
Commit 1acf757255 made _cmp functions public to solve NaN issues locally
for GiST indexes. This patch reworks it in favour of a more widely
applicable API. The API uses inline functions, as they are easier to
use compared to macros, and avoid double-evaluation hazards.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
The primary goal of this patch is to eliminate duplicate code and share
code between different geometric data types more often, to prepare the
ground for additional patches. Until now the code reuse was limited,
probably because the simpler types (line and point) were implemented
after the more complex ones.
The changes are quite extensive and can be summarised as:
* Eliminate SQL-level function calls.
* Re-use more functions to implement others.
* Unify internal function names and signatures.
* Remove private functions from geo_decls.h.
* Replace should-not-happen checks with assertions.
* Add comments describe for various functions.
* Remove some unreachable code.
* Define delimiter symbols of line datatype like the other ones.
* Remove the GEODEBUG macro and printf() calls.
* Unify code style of a few oddly formatted lines.
While the goal was to cause minimal user-visible changes, it was not
possible to keep the original behavior in all cases - for example when
handling NaN values, or when reusing code makes the functions return
consistent results.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi, me
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
This is useful to know when the data copy has been finished. The
current situation can be confusing for users as the last message is
"waiting for background process to finish streaming", so it looks like
this is taking time but the final sync is instead.
Author: Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1ypeoMJ=tFBG8vP13sxEtXd4Pm_x1SqsJdW_RvzpcvN=A@mail.gmail.com
Previously pg_upgrade checked for the pid file and started/stopped the
server to force a clean shutdown. However, "pg_ctl -m immediate"
removes the pid file but doesn't do a clean shutdown, so check
pg_controldata for a clean shutdown too.
Diagnosed-by: Vimalraj A
Discussion: https://postgr.es/m/CAFKBAK5e4Q-oTUuPPJ56EU_d2Rzodq6GWKS3ncAk3xo7hAsOZg@mail.gmail.com
Backpatch-through: 9.3
Previously only the missing library name was reported, forcing users to
look in all databases to find the library entries.
Discussion: https://postgr.es/m/20180713162815.GA3835@momjian.us
Author: Daniel Gustafsson, me
In our B-tree implementation appropriate leaf page for new tuple
insertion is acquired using _bt_search() function. This function always
returns leaf page locked in shared mode. In order to obtain exclusive
lock, caller have to relock the page.
This commit makes _bt_search() function lock leaf page immediately in
exclusive mode when needed. That removes unnecessary relock and, in
turn reduces lock contention for B-tree leaf pages. Our experiments
on multi-core systems showed acceleration up to 4.5 times in corner
case.
Discussion: https://postgr.es/m/CAPpHfduAMDFMNYTCN7VMBsFg_hsf0GqiqXnt%2BbSeaJworwFoig%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Yoshikazu Imai, Simon Riggs, Peter Geoghegan
Instead of repeatedly fishing the data out of the relcache entry,
let's use the version that we cached in the PartitionDispatch. We
could alternatively rip out the PartitionDispatch fields altogether,
but it doesn't make much sense to have them and not use them; before
this patch, partdesc was set but altogether unused. Amit Langote and
I both thought using them was a litle better than removing them, so
this patch takes that approach.
Discussion: http://postgr.es/m/CA+TgmobFnxcaW-Co-XO8=yhJ5pJXoNkCj6Z7jm9Mwj9FGv-D7w@mail.gmail.com
During parallel index scans, if the current page to be read is deleted, we
skip it and try to get the next page for a scan without releasing the buffer
lock on the current page. To get the next page, sometimes it needs to wait
for another process to complete its scan and advance it to the next page.
Now, it is quite possible that the master backend has errored out before
advancing the scan and issued a termination signal for all workers. The
workers failed to notice the termination request during wait because the
interrupts are held due to buffer lock on the previous page. This lead to
all workers being stuck.
The fix is to release the buffer lock on current page before trying to get
the next page. We are already doing same in backward scans, but missed
it for forward scans.
Reported-by: Victor Yegorov
Bug: 15290
Diagnosed-by: Thomas Munro and Amit Kapila
Author: Amit Kapila
Reviewed-by: Thomas Munro
Tested-By: Thomas Munro and Victor Yegorov
Backpatch-through: 10 where parallel index scans were introduced
Discussion: https://postgr.es/m/153228422922.1395.1746424054206154747@wrigleys.postgresql.org
Depending on the platform used, this can cause a crash in the worst
case, or an unhelpful error message, so fail gracefully.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1807262302550.29874@lancre
Backpatch: 11-, where hash() has been added in pgbench.
We suppressed one of these test cases in commit feb1cc559 because
it was failing to produce the expected results on CLOBBER_CACHE_ALWAYS
buildfarm members. But now we need another test with similar behavior,
so let's set up a test file that is expected to vary between regular and
CLOBBER_CACHE_ALWAYS cases, and provide variant expected files.
Someday we should fix plpgsql's failure for change-of-field-type, and
then the discrepancy will go away and we can fold these tests back
into plpgsql_record.sql. But today is not that day.
Discussion: https://postgr.es/m/87wotkfju1.fsf@news-spur.riddles.org.uk
Since commit 6719b238e it's been possible for the values of plpgsql
record field variables to be exposed to the planner as Params.
(Before that, plpgsql never supplied values for such variables during
planning, so that the problematic code wasn't reached.) Other places
that touch potentially-type-mutable Params either cope gracefully or
do runtime-test-and-ereport checks that the type is what they expect.
But eval_const_expressions() just had an Assert, meaning that it either
failed the assertion or risked crashes due to using an incompatible
value.
In this case, rather than throwing an ereport immediately, we can just
not perform a const-substitution in case of a mismatch. This seems
important for the same reason that the Param fetch was speculative:
we might not actually reach this part of the expression at runtime.
Test case will follow in a separate commit.
Patch by me, pursuant to bug report from Andrew Gierth.
Back-patch to v11 where the previous commit appeared.
Discussion: https://postgr.es/m/87wotkfju1.fsf@news-spur.riddles.org.uk
Due to inlining it previously was possible that an ExprContext's
shutdown callback pointed to a JITed function. As the JIT context
previously was shut down before the shutdown callbacks were called,
that could lead to segfaults. Fix the ordering.
Reported-By: Dmitry Dolgov
Author: Andres Freund
Discussion: https://postgr.es/m/CA+q6zcWO7CeAJtHBxgcHn_hj+PenM=tvG0RJ93X1uEJ86+76Ug@mail.gmail.com
Backpatch: 11-, where JIT compilation was added
Previously the attribute was only checked for external functions
inlined, not "static" functions that had to be inlined as
dependencies.
This isn't really a bug, but makes debugging a bit harder. The new
behaviour also makes more sense. Therefore backpatch.
Author: Andres Freund
Backpatch: 11-, where JIT compilation was added
Until now shadowed_variables was the only plpgsql check supported by
plpgsql.extra_warnings and plpgsql.extra_errors. This patch introduces
two new checks - strict_multi_assignment and too_many_rows. Unlike
shadowed_variables, these new checks are enforced at run-time.
strict_multi_assignment checks that commands allowing multi-assignment
(for example SELECT INTO) have the same number of sources and targets.
too_many_rows checks that queries with an INTO clause return one row
exactly.
These checks are aimed at cases that are technically valid and allowed,
but are often a sign of a bug. Therefore those checks are expected to
be enabled primarily in development and testing environments.
Author: Pavel Stehule
Reviewed-by: Stephen Frost, Tomas Vondra
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRA2kKRDKpUNwLY0GeG1OqOp+tLS2yQA1V41gzuSz-hCng@mail.gmail.com
In a USE_UNNAMED_SEMAPHORES build, the default on Linux and FreeBSD
since commit ecb0d20a, we have an array of sem_t objects. This
turned out to reduce performance compared to the previous default
USE_SYSV_SEMAPHORES on an 8 socket system. Testing showed that the
lost performance could be regained by padding the array elements so
that they have their own cache lines. This matches what we do for
similar hot arrays (see LWLockPadded, WALInsertLockPadded).
Back-patch to 10, where unnamed semaphores were adopted as the default
semaphore interface on those operating systems.
Author: Thomas Munro
Reviewed-by: Andres Freund
Reported-by: Mithun Cy
Tested-by: Mithun Cy, Tom Lane, Thomas Munro
Discussion: https://postgr.es/m/CAD__OugYDM3O%2BdyZnnZSbJprSfsGFJcQ1R%3De59T3hcLmDug4_w%40mail.gmail.com
This extends cluster_rel() in such a way that more options can be added
in the future, which will reduce the amount of chunk code for an
upcoming SKIP_LOCKED aimed for VACUUM. As VACUUM FULL is a different
flavor of CLUSTER, we want to make that extensible to ease integration.
This only reworks the API and its callers, without providing anything
user-facing. Two options are present now: verbose mode and relation
recheck when doing the cluster command work across multiple
transactions. This could be used as well as a base to extend the
grammar of CLUSTER later on.
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/20180723031058.GE2854@paquier.xyz
Commit 4b0d28de06 has removed the prior checkpoint and related
facilities but has left WAL recycling based on the LSN of the prior
checkpoint, which causes incorrect calculations for WAL removal and
recycling for max_wal_size and min_wal_size. This commit changes things
so as the base calculation point is the last checkpoint generated.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20180723.135748.42558387.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch: 11-, where the prior checkpoint has been removed.
During the work of upstreaming my previous patches for gdb and perf
support the API changed. Adapt. Normally this wouldn't necessarily be
something to backpatch, but the previous API wasn't upstream, and at
least the gdb support is quite useful for debugging.
Author: Andres Freund
Backpatch: 11, where LLVM based JIT support was added.
Those would use the default ERRCODE_INTERNAL_ERROR, but for foreseeable
failures an errcode ought to be set, ERRCODE_DATA_CORRUPTED making the
most sense here.
While on the way, fix one errcode_for_file_access missing in origin.c
since the code has been created, and remove one assignment of errno to 0
before calling read(), as this was around to fit with what was present
before 811b6e36 where errno would not be set when not enough bytes are
read. I have noticed the first one, and Tom has pinged me about the
second one.
Author: Michael Paquier
Reported-by: Tom Lane
Discussion: https://postgr.es/m/27265.1531925836@sss.pgh.pa.us
Some error messages which report something about a file operation use
as well context which is already provided within the path being worked
on, making things rather duplicated. This creates more work for
translators, and does not actually bring clarity.
More could be done, however in a lot of cases the context used is
actually useful, still that patch gets down things with a good cut.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/20180718044711.GA8565@paquier.xyz
The JIT compiled implementation missed maintaining
AggState->{current_set,curaggcontext}. That could lead to trouble
because the transition value could be allocated in the wrong context.
Reported-By: Rushabh Lathia
Diagnosed-By: Dmitry Dolgov
Author: Dmitry Dolgov, with minor changes by me
Discussion: https://postgr.es/m/CAGPqQf165-=+Drw3Voim7M5EjHT1zwPF9BQRjLFQzCzYnNZEiQ@mail.gmail.com
Backpatch: 11-, where JIT compilation support was added
As benchmarks show, using libc's string-to-integer conversion is
pretty slow. At least part of the reason for that is that strtol[l]
have to be more generic than what largely is required inside pg.
This patch considerably speeds up int2/int4 input (int8 already was
already using hand-rolled code).
Most of the existing pg_atoi callers have been converted. But as one
requires pg_atoi's custom delimiter functionality, and as it seems
likely that there's external pg_atoi users, it seems sensible to just
keep pg_atoi around.
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20171208214437.qgn6zdltyq5hmjpk@alap3.anarazel.de
Previously a lot of the error messages referenced the type in the
error message itself. That requires that the message is translated
separately for each type.
Note that currently a few smallint cases continue to reference the
integer, rather than smallint, type. A later patch will create a
separate routine for 16bit input.
Author: Andres Freund
Discussion: https://postgr.es/m/20180707200158.wpqkd7rjr4jxq5g7@alap3.anarazel.de
I blew the dust off a Bourne shell (file date 1996, yea verily) and
tried to run test.sh with it. It mostly worked, but I found that the
temp-directory creation code introduced by commit be76a6d39 was not
compatible, for a couple of reasons: this shell thinks "set -e" should
force an exit if a command within backticks fails, and it also thinks code
within braces should be executed by a sub-shell, meaning that variable
settings don't propagate back up to the parent shell. In view of Victor
Wagner's report that Solaris is still using pre-POSIX shells, seems like
we oughta make this case work. It's not like the code is any less
idiomatic this way; the prior coding technique appeared nowhere else.
(There is a remaining bash-ism here, which is that $RANDOM doesn't do
what the code hopes in non-bash shells. But the use of $$ elsewhere in
that path should be enough to ensure uniqueness and some amount of
randomness, so I think it's okay as-is.)
Back-patch to all supported branches, as the previous commit was.
Discussion: https://postgr.es/m/20180720153820.69e9ae6c@fafnir.local.vm
Double-quote $PGDATA in "find" commands introduced by commit da9b580d8,
in case that path contains spaces or other special characters.
Adjust a few other places so that quoting is done more consistently.
None of the others are actual bugs AFAICS, but it's confusing to readers
if the same thing is done differently in different places.
Noted by Tels.
Discussion: https://postgr.es/m/c96303c04c360bbedaa04f90f515745b.squirrel@sm.webmail.pair.com
Most of test.sh uses traditional backtick syntax for command substitution,
but commit da9b580d8 introduced two uses of $(...) syntax, which is not
recognized by very old shells. Bring those into line with the rest.
Victor Wagner
Discussion: https://postgr.es/m/20180720153820.69e9ae6c@fafnir.local.vm
When built using OpenSSL, pg_strong_random() uses RAND_bytes() to
generate the random number. On very rare occasions that can fail, if
its PRNG has not been seeded with enough data. Additionally, once it
does fail, all subsequent calls will also fail until more seed data is
added. Since this is required during backend startup, this can result
in all new backends failing to start until a postmaster restart.
Guard against that by checking the state of OpenSSL's PRNG using
RAND_status(), and if necessary (very rarely), seeding it using
RAND_poll().
Back-patch to v10, where pg_strong_random() was introduced.
Dean Rasheed and Michael Paquier.
Discussion: https://postgr.es/m/CAEZATCXMtxbzSAvyKKk5uCRf9pNt4UV%2BF_5v%3DgLfJUuPxU4Ytg%40mail.gmail.com
It has been project policy to create toast tables only for those catalogs
that might reasonably need one. Since this judgment call can change over
time, just create one for every catalog, as this can be useful when
creating rather-long entries in catalogs, with recent examples being in
the shape of policy expressions or customly-formatted SCRAM verifiers.
To prevent circular dependencies and to avoid adding complexity to VACUUM
FULL logic, exclude pg_class, pg_attribute, and pg_index. Also, to
prevent pg_upgrade from seeing a non-empty new cluster, exclude
pg_largeobject and pg_largeobject_metadata from the set as large object
data is handled as user data. Those relations have no reason to use a
toast table anyway.
Author: Joe Conway, John Naylor
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/84ddff04-f122-784b-b6c5-3536804495f8@joeconway.com
transformPartitionSpec rejected duplicate simple partition columns
(e.g., "PARTITION BY RANGE (x,x)") but paid no attention to expression
columns, resulting in inconsistent behavior. Worse, cases like
"PARTITION BY RANGE (x,(x))") were accepted but would then result in
dump/reload failures, since the expression (x) would get simplified
to a plain column later.
There seems no better reason for this restriction than there was for
the one against duplicate included index columns (cf commit 701fd0bbc),
so let's just remove it.
Back-patch to v10 where this code was added.
Report and patch by Yugo Nagata.
Discussion: https://postgr.es/m/20180712165939.36b12aff.nagata@sraoss.co.jp
This is essential information when looking at an index that has
"included" columns. Per discussion, follow the style used in \dC
and some other places: column header is "Key?" and values are "yes"
or "no" (all translatable).
While at it, revise describeOneTableDetails to be a bit more maintainable:
avoid hard-wired column numbers and multiple repetitions of what needs
to be identical test logic. This also results in the emitted catalog
query corresponding more closely to what we print, which should be a
benefit to users of ECHO_HIDDEN mode, and perhaps a bit faster too
(the old logic sometimes asked for values it would not print, even
ones that are fairly expensive to get).
Discussion: https://postgr.es/m/21724.1531943735@sss.pgh.pa.us
The multi-argument form of pg_get_indexdef() failed to print anything when
asked to print a single index column that is an included column rather than
a key column. This seems an unintentional result of someone having tried
to take a short-cut and use the attrsOnly flag for two different purposes.
To fix, split said flag into two flags, attrsOnly which suppresses
non-attribute info, and keysOnly which suppresses included columns.
Add a test case using psql's \d command, which relies on that function.
(It's mighty tempting at this point to replace pg_get_indexdef_worker's
mess of boolean flag arguments with a single bitmask-of-flags argument,
which would allow making the call sites much more self-documenting.
But I refrained for the moment.)
Discussion: https://postgr.es/m/21724.1531943735@sss.pgh.pa.us
The code added by 9c7d06d606 was a bit obscure; clarify that by
rewriting the comments. Lack of clarity has already caused bugs, so
it's a worthy goal.
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Michaël Paquier <michael@paquier.xyz>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/87y3fgoyrn.fsf@ars-thinkpad
PostgreSQL 9.4 introduces posting list compression in GIN. This feature
supports online upgrade, so that after pg_upgrade uncompressed posting
lists are compressed on-the-fly. Underlying code appears to always
expect at least one item on uncompressed posting list page. But there
could be completely empty pages, because VACUUM never deletes leftmost
and rightmost pages from posting trees. This commit fixes that.
Reported-by: Sivasubramanian Ramasubramanian
Discussion: https://postgr.es/m/1531867212836.63354%40amazon.com
Author: Sivasubramanian Ramasubramanian, Alexander Korotkov
Backpatch-through: 9.4
This comment was copy-pasted from nodeAppend.c to nodeMergeAppend.c, but
while committing 5220bb7533, I modified wrong copy of it.
Spotted by David Rowley
GatherMergePath (introduced in 10) and CustomPath (introduced in 9.5)
have gone missing. The order of the Path nodes was inconsistent with
what is listed in nodes.h, so make the order consistent at the same time
to ease future checks and additions.
Author: Sawada Masahiko
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBQMLoc=ohH-oocuAPsELrmk8_EsRJjOyR8FQLZkbE0wA@mail.gmail.com
Instead of MergeAppendPath, MergeAppend nodes were considered. This
code is not covered by any tests now, which should be addressed at some
point.
This is an oversight from f49842d, which introduced partition-wise joins
in v11, so back-patch down to that.
Author: Michael Paquier
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/20180718062202.GC8565@paquier.xyz
This script supposed that if it turned hot_standby_feedback on and then
shut down the standby server, at least one feedback message would be
guaranteed to be sent before the standby stops. But there is no such
guarantee, if the standby's walreceiver process is slow enough --- and
we've seen multiple failures in the buildfarm showing that that does
happen in practice. While we could rearrange the walreceiver logic to
make it less likely, it seems probably impossible to create a really
bulletproof guarantee of that sort; and if we tried, we might create
situations where the walreceiver wouldn't react in a timely manner to
shutdown commands. It seems better instead to remove the script's
assumption that feedback will occur before shutdown.
But once we do that, these last few tests seem quite redundant with
the earlier tests in the script. So let's just drop them altogether
and save some buildfarm cycles.
Backpatch to v10 where these tests were added.
Discussion: https://postgr.es/m/1922.1531592205@sss.pgh.pa.us
The initial version of the included-index-column feature stated that
included columns couldn't be the same as any key column of the index.
While it'd be pretty silly to do that, since the included column would be
entirely redundant, we've never prohibited redundant index columns before
so it's not very consistent to do so here. Moreover, the prohibition
was itself badly implemented, so that it failed to reject columns that
were effectively identical but not spelled quite alike, as reported by
Aditya Toshniwal.
(Moreover, it's not hard to imagine that for some non-btree index types,
such cases would be non-silly anyhow: the index might use a lossy
representation for key columns but be able to support retrieval of the
original form of included columns.)
Hence, let's just drop the prohibition.
In passing, do some copy-editing on the documentation for the
included-column feature.
Yugo Nagata; documentation and test corrections by me
Discussion: https://postgr.es/m/CAM9w-_mhBCys4fQNfaiQKTRrVWtoFrZ-wXmDuE9Nj5y-Y7aDKQ@mail.gmail.com
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
This should tame the beast, as there are no other places where off_t is
used in the new error messages.
Reported again by longfin, which complained about walsender.c while I
spotted the other two ones while double-checking.
Some error messages related to file handling are using the code path
context to define their state. For example, 2PC-related errors are
referring to "two-phase status files", or "relation mapping file" is
used for catalog-to-filenode mapping, however those prove to be
difficult to translate, and are not more helpful than just referring to
the path of the file being worked on. So simplify all those error
messages by just referring to files with their path used. In some
cases, like the manipulation of WAL segments, the context is actually
helpful so those are kept.
Calls to the system function read() have also been rather inconsistent
with their error handling sometimes not reporting the number of bytes
read, and some other code paths trying to use an errno which has not
been set. The in-core functions are using a more consistent pattern
with this patch, which checks for both errno if set or if an
inconsistent read is happening.
So as to care about pluralization when reading an unexpected number of
byte(s), "could not read: read %d of %zu" is used as error message, with
%d field being the output result of read() and %zu the expected size.
This simplifies the work of translators with less variations of the same
message.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180520000522.GB1603@paquier.xyz
Getting a pg_index tuple from syscache when the open index relation is
available is pointless -- just use the one from relcache.
Noticed while reviewing code for cb9db2ab06.
No backpatch.
The existing error message was complaining that the column is not an
expression, which is not correct. Introduce a suitable wording
variation and a test.
Co-authored-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20180628182803.e4632d5a.nagata@sraoss.co.jp
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
The original code was unable to prune partitions that could not possibly
contain NULL values, when the query specified less than all columns in a
multicolumn partition key. Reorder the if-tests so that it is, and add
more commentary and regression tests.
Reported-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Co-authored-by: Dilip Kumar <dilipbalaut@gmail.com>
Co-authored-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Reviewed-by: amul sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/CAFjFpRc7qjLUfXLVBBC_HAnx644sjTYM=qVoT3TJ840HPbsTXw@mail.gmail.com
Since the old logic was completely unaware of subtransactions, a
change made in a subsequently-aborted subtransaction would still cause
workers to be stopped at toplevel transaction commit. Fix that by
managing a stack of worker lists rather than just one.
Amit Khandekar and Robert Haas
Discussion: http://postgr.es/m/CAJ3gD9eaG_mWqiOTA2LfAug-VRNn1hrhf50Xi1YroxL37QkZNg@mail.gmail.com
Update links that resulted in redirects. Most are changes from http to
https, but there are also some other minor edits. (There are still some
redirects where the target URL looks less elegant than the one we
currently have. I have left those as is.)
In final_cost_hashjoin(), commit 9c7f5229a allowed inner_unique cases
to follow a code path previously used only for SEMI/ANTI joins; but it
neglected to fix an if-test within that path that assumed SEMI and ANTI
were the only possible cases. This resulted in a wrong value for
hashjointuples, and an ensuing bad cost estimate, for inner_unique normal
joins. Fortunately, for inner_unique normal joins we can assume the number
of joined tuples is the same as for a SEMI join; so there's no need for
more code, we just have to invert the test to check for ANTI not SEMI.
It turns out that in two contrib tests in which commit 9c7f5229a
changed the plan expected for a query, the change was actually wrong
and induced by this estimation error, not by any real improvement.
Hence this patch also reverts those changes.
Per report from RK Korlapati. Backpatch to v10 where the error was
introduced.
David Rowley
Discussion: https://postgr.es/m/CA+SNy03bhq0fodsfOkeWDCreNjJVjsdHwUsb7AG=jpe0PtZc_g@mail.gmail.com
Now that the documentation sources are in XML rather than SGML, some of
the documentation about the editor, or more specifically Emacs, setup
needs updating. The updated instructions recommend using nxml-mode,
which works mostly out of the box, with some small tweaks in
emacs.samples and .dir-locals.el.
Also remove some obsolete stuff in .dir-locals.el. I did, however,
leave the sgml-mode settings in there so that someone using Emacs
without emacs.samples gets those settings when editing a *.sgml file.
As of commit 37a795a60, populate_recordset_worker() tried to pass back
(as rsi.setDesc) a tupdesc that it also had cached in its fn_extra.
But the core executor would free the passed-back tupdesc, risking a
crash if the function were called again in the same query. The safest
and least invasive way to fix that is to make an extra tupdesc copy
to pass back.
While at it, I failed to resist the temptation to get rid of unnecessary
get_fn_expr_argtype() calls here and in populate_record_worker().
Per report from Dmitry Dolgov; thanks to Michael Paquier and
Andrew Gierth for investigation and discussion.
Discussion: https://postgr.es/m/CA+q6zcWzN9ztCfR47ZwgTr1KLnuO6BAY6FurxXhovP4hxr+yOQ@mail.gmail.com
The patch that ended up as commit 3de241dba8 ("Foreign keys on
partitioned tables") lacked pg_dump tests, so the pg_dump code that was
there to support it inadvertently stopped working when in later
development I modified the backend code not to emit pg_trigger rows for
the partitioned table itself.
Bug analysis and code fix is by Michaël. I (Álvaro) added the test.
Reported-by: amul sul <sulamul@gmail.com>
Co-authored-by: Michaël Paquier <michael@paquier.xyz>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAAJ_b94n=UsNVhgs97vCaWEZAMe-tGDRVuZ73oePQH=eaJKGSA@mail.gmail.com
Previously convert_tuples_by_name_map naively performed a search of each
outdesc column starting at the first column in indesc and searched each
indesc column until a match was found. When partitioned tables had many
columns this could result in slow generation of the tuple conversion maps.
For INSERT and UPDATE statements that touched few rows, this could mean a
very large overhead indeed.
We can do a bit better with this loop. It's quite likely that the columns
in partitioned tables and their partitions are in the same order, so it
makes sense to start searching for each column outer column at the inner
column position 1 after where the previous match was found (per idea from
Alexander Kuzmenkov). This makes the best case search O(N) instead of
O(N^2). The worst case is still O(N^2), but it seems unlikely that would
happen.
Likewise, in the planner, make_inh_translation_list's search for the
matching column could often end up falling back on an O(N^2) type search.
This commit also improves that by first checking the column that follows
the previous match, instead of the column with the same attnum. If we
fail to match here we fallback on the syscache's hashtable lookup.
Author: David Rowley
Reviewed-by: Alexander Kuzmenkov
Discussion: https://www.postgresql.org/message-id/CAKJS1f9-wijVgMdRp6_qDMEQDJJ%2BA_n%3DxzZuTmLx5Fz6cwf%2B8A%40mail.gmail.com
When reading an existing FSM or VM page that was found to be corrupt by the
buffer manager, the code applied PageInit() to reinitialize the page, but
did so without any locking. There is thus a hazard that two backends might
concurrently do PageInit, which in itself would still be OK, but the slower
one might then zero over subsequent data changes applied by the faster one.
Even that is unlikely to be fatal; but it's not desirable, so add locking
to prevent it.
This does not add any locking overhead in the normal code path where the
page is OK. It's not immediately obvious that that's safe, but I believe
it is, for reasons explained in the added comments.
Problem noted by R P Asim. It's been like this for a long time, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CANXE4Te4G0TGq6cr0-TvwP0H4BNiK_-hB5gHe8mF+nz0mcYfMQ@mail.gmail.com
Starting and aborting transactions in security definer procedures
doesn't work. StartTransaction() insists that the security context
stack is empty, so this would currently cause a crash, and
AbortTransaction() resets it. This could be made to work by
reorganizing the code, but right now we just prohibit it.
Reported-by: amul sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b96Gupt_LFL7uNyy3c50-wbhA68NUjiK5%3DrF6_w%3Dpq_T%3DQ%40mail.gmail.com
All attributes and arguments using a slot name map to the data type
"name", but this function has been using "text". This is cosmetic, as
even if text is used then the slot name would be truncated to 64
characters anyway and stored as such. The documentation already said
so and the function already assumed that the argument was of this type
when fetching its value.
Bump catalog version.
Author: Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoADYz_-eAqH5AVFaCaojcRgwpo9PW=u8kgTMys63oB8Cw@mail.gmail.com
Temporary WAL segments are created in pg_wal and named as xlogtemp.pid
before being renamed to the real deal when creating a new segment. If
an instance crashes after the temporary segment is created and before
the rename is done, then the server would finish with unremovable data.
After an instance crash, scan pg_wal and remove any such segments. With
repetitive unlucky crashes this would contribute to disk bloat and
presents risks of ENOSPC especially with max_wal_size close to the
maximum allowed.
Author: Michael Paquier
Reviewed-by: Yugo Nagata, Heikki Linnakangas
Discussion: https://postgr.es/m/20180514054955.GF1528@paquier.xyz
In ad9a274778, shmem_exit_inprogress was
introduced. But we need to reset it after shmem_exit(), because unlike
the similar proc_exit(), shmem_exit() can also be called for cleanup
when the process will not exit.
Reported-by: Andrew Gierth <andrew@tao11.riddles.org.uk>
When truncating a table that is referenced by foreign keys in
partitioned tables, the check to ensure the referencing table are also
truncated spuriously failed. This is because it was relying on
relhastriggers as a proxy for the table having FKs, and that's wrong for
partitioned tables. Fix it to consider such tables separately. There
may be a better way ... but this code is pretty inefficient already.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/20180711000624.zmeizicibxeehhsg@alvherre.pgsql
