Some error messages which report something about a file operation use
as well context which is already provided within the path being worked
on, making things rather duplicated. This creates more work for
translators, and does not actually bring clarity.
More could be done, however in a lot of cases the context used is
actually useful, still that patch gets down things with a good cut.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/20180718044711.GA8565@paquier.xyz
The JIT compiled implementation missed maintaining
AggState->{current_set,curaggcontext}. That could lead to trouble
because the transition value could be allocated in the wrong context.
Reported-By: Rushabh Lathia
Diagnosed-By: Dmitry Dolgov
Author: Dmitry Dolgov, with minor changes by me
Discussion: https://postgr.es/m/CAGPqQf165-=+Drw3Voim7M5EjHT1zwPF9BQRjLFQzCzYnNZEiQ@mail.gmail.com
Backpatch: 11-, where JIT compilation support was added
As benchmarks show, using libc's string-to-integer conversion is
pretty slow. At least part of the reason for that is that strtol[l]
have to be more generic than what largely is required inside pg.
This patch considerably speeds up int2/int4 input (int8 already was
already using hand-rolled code).
Most of the existing pg_atoi callers have been converted. But as one
requires pg_atoi's custom delimiter functionality, and as it seems
likely that there's external pg_atoi users, it seems sensible to just
keep pg_atoi around.
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20171208214437.qgn6zdltyq5hmjpk@alap3.anarazel.de
Previously a lot of the error messages referenced the type in the
error message itself. That requires that the message is translated
separately for each type.
Note that currently a few smallint cases continue to reference the
integer, rather than smallint, type. A later patch will create a
separate routine for 16bit input.
Author: Andres Freund
Discussion: https://postgr.es/m/20180707200158.wpqkd7rjr4jxq5g7@alap3.anarazel.de
I blew the dust off a Bourne shell (file date 1996, yea verily) and
tried to run test.sh with it. It mostly worked, but I found that the
temp-directory creation code introduced by commit be76a6d39 was not
compatible, for a couple of reasons: this shell thinks "set -e" should
force an exit if a command within backticks fails, and it also thinks code
within braces should be executed by a sub-shell, meaning that variable
settings don't propagate back up to the parent shell. In view of Victor
Wagner's report that Solaris is still using pre-POSIX shells, seems like
we oughta make this case work. It's not like the code is any less
idiomatic this way; the prior coding technique appeared nowhere else.
(There is a remaining bash-ism here, which is that $RANDOM doesn't do
what the code hopes in non-bash shells. But the use of $$ elsewhere in
that path should be enough to ensure uniqueness and some amount of
randomness, so I think it's okay as-is.)
Back-patch to all supported branches, as the previous commit was.
Discussion: https://postgr.es/m/20180720153820.69e9ae6c@fafnir.local.vm
Double-quote $PGDATA in "find" commands introduced by commit da9b580d8,
in case that path contains spaces or other special characters.
Adjust a few other places so that quoting is done more consistently.
None of the others are actual bugs AFAICS, but it's confusing to readers
if the same thing is done differently in different places.
Noted by Tels.
Discussion: https://postgr.es/m/c96303c04c360bbedaa04f90f515745b.squirrel@sm.webmail.pair.com
Most of test.sh uses traditional backtick syntax for command substitution,
but commit da9b580d8 introduced two uses of $(...) syntax, which is not
recognized by very old shells. Bring those into line with the rest.
Victor Wagner
Discussion: https://postgr.es/m/20180720153820.69e9ae6c@fafnir.local.vm
When built using OpenSSL, pg_strong_random() uses RAND_bytes() to
generate the random number. On very rare occasions that can fail, if
its PRNG has not been seeded with enough data. Additionally, once it
does fail, all subsequent calls will also fail until more seed data is
added. Since this is required during backend startup, this can result
in all new backends failing to start until a postmaster restart.
Guard against that by checking the state of OpenSSL's PRNG using
RAND_status(), and if necessary (very rarely), seeding it using
RAND_poll().
Back-patch to v10, where pg_strong_random() was introduced.
Dean Rasheed and Michael Paquier.
Discussion: https://postgr.es/m/CAEZATCXMtxbzSAvyKKk5uCRf9pNt4UV%2BF_5v%3DgLfJUuPxU4Ytg%40mail.gmail.com
It has been project policy to create toast tables only for those catalogs
that might reasonably need one. Since this judgment call can change over
time, just create one for every catalog, as this can be useful when
creating rather-long entries in catalogs, with recent examples being in
the shape of policy expressions or customly-formatted SCRAM verifiers.
To prevent circular dependencies and to avoid adding complexity to VACUUM
FULL logic, exclude pg_class, pg_attribute, and pg_index. Also, to
prevent pg_upgrade from seeing a non-empty new cluster, exclude
pg_largeobject and pg_largeobject_metadata from the set as large object
data is handled as user data. Those relations have no reason to use a
toast table anyway.
Author: Joe Conway, John Naylor
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/84ddff04-f122-784b-b6c5-3536804495f8@joeconway.com
transformPartitionSpec rejected duplicate simple partition columns
(e.g., "PARTITION BY RANGE (x,x)") but paid no attention to expression
columns, resulting in inconsistent behavior. Worse, cases like
"PARTITION BY RANGE (x,(x))") were accepted but would then result in
dump/reload failures, since the expression (x) would get simplified
to a plain column later.
There seems no better reason for this restriction than there was for
the one against duplicate included index columns (cf commit 701fd0bbc),
so let's just remove it.
Back-patch to v10 where this code was added.
Report and patch by Yugo Nagata.
Discussion: https://postgr.es/m/20180712165939.36b12aff.nagata@sraoss.co.jp
This is essential information when looking at an index that has
"included" columns. Per discussion, follow the style used in \dC
and some other places: column header is "Key?" and values are "yes"
or "no" (all translatable).
While at it, revise describeOneTableDetails to be a bit more maintainable:
avoid hard-wired column numbers and multiple repetitions of what needs
to be identical test logic. This also results in the emitted catalog
query corresponding more closely to what we print, which should be a
benefit to users of ECHO_HIDDEN mode, and perhaps a bit faster too
(the old logic sometimes asked for values it would not print, even
ones that are fairly expensive to get).
Discussion: https://postgr.es/m/21724.1531943735@sss.pgh.pa.us
The multi-argument form of pg_get_indexdef() failed to print anything when
asked to print a single index column that is an included column rather than
a key column. This seems an unintentional result of someone having tried
to take a short-cut and use the attrsOnly flag for two different purposes.
To fix, split said flag into two flags, attrsOnly which suppresses
non-attribute info, and keysOnly which suppresses included columns.
Add a test case using psql's \d command, which relies on that function.
(It's mighty tempting at this point to replace pg_get_indexdef_worker's
mess of boolean flag arguments with a single bitmask-of-flags argument,
which would allow making the call sites much more self-documenting.
But I refrained for the moment.)
Discussion: https://postgr.es/m/21724.1531943735@sss.pgh.pa.us
The code added by 9c7d06d606 was a bit obscure; clarify that by
rewriting the comments. Lack of clarity has already caused bugs, so
it's a worthy goal.
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Michaël Paquier <michael@paquier.xyz>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/87y3fgoyrn.fsf@ars-thinkpad
PostgreSQL 9.4 introduces posting list compression in GIN. This feature
supports online upgrade, so that after pg_upgrade uncompressed posting
lists are compressed on-the-fly. Underlying code appears to always
expect at least one item on uncompressed posting list page. But there
could be completely empty pages, because VACUUM never deletes leftmost
and rightmost pages from posting trees. This commit fixes that.
Reported-by: Sivasubramanian Ramasubramanian
Discussion: https://postgr.es/m/1531867212836.63354%40amazon.com
Author: Sivasubramanian Ramasubramanian, Alexander Korotkov
Backpatch-through: 9.4
This comment was copy-pasted from nodeAppend.c to nodeMergeAppend.c, but
while committing 5220bb7533, I modified wrong copy of it.
Spotted by David Rowley
GatherMergePath (introduced in 10) and CustomPath (introduced in 9.5)
have gone missing. The order of the Path nodes was inconsistent with
what is listed in nodes.h, so make the order consistent at the same time
to ease future checks and additions.
Author: Sawada Masahiko
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBQMLoc=ohH-oocuAPsELrmk8_EsRJjOyR8FQLZkbE0wA@mail.gmail.com
Instead of MergeAppendPath, MergeAppend nodes were considered. This
code is not covered by any tests now, which should be addressed at some
point.
This is an oversight from f49842d, which introduced partition-wise joins
in v11, so back-patch down to that.
Author: Michael Paquier
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/20180718062202.GC8565@paquier.xyz
This script supposed that if it turned hot_standby_feedback on and then
shut down the standby server, at least one feedback message would be
guaranteed to be sent before the standby stops. But there is no such
guarantee, if the standby's walreceiver process is slow enough --- and
we've seen multiple failures in the buildfarm showing that that does
happen in practice. While we could rearrange the walreceiver logic to
make it less likely, it seems probably impossible to create a really
bulletproof guarantee of that sort; and if we tried, we might create
situations where the walreceiver wouldn't react in a timely manner to
shutdown commands. It seems better instead to remove the script's
assumption that feedback will occur before shutdown.
But once we do that, these last few tests seem quite redundant with
the earlier tests in the script. So let's just drop them altogether
and save some buildfarm cycles.
Backpatch to v10 where these tests were added.
Discussion: https://postgr.es/m/1922.1531592205@sss.pgh.pa.us
The initial version of the included-index-column feature stated that
included columns couldn't be the same as any key column of the index.
While it'd be pretty silly to do that, since the included column would be
entirely redundant, we've never prohibited redundant index columns before
so it's not very consistent to do so here. Moreover, the prohibition
was itself badly implemented, so that it failed to reject columns that
were effectively identical but not spelled quite alike, as reported by
Aditya Toshniwal.
(Moreover, it's not hard to imagine that for some non-btree index types,
such cases would be non-silly anyhow: the index might use a lossy
representation for key columns but be able to support retrieval of the
original form of included columns.)
Hence, let's just drop the prohibition.
In passing, do some copy-editing on the documentation for the
included-column feature.
Yugo Nagata; documentation and test corrections by me
Discussion: https://postgr.es/m/CAM9w-_mhBCys4fQNfaiQKTRrVWtoFrZ-wXmDuE9Nj5y-Y7aDKQ@mail.gmail.com
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
This should tame the beast, as there are no other places where off_t is
used in the new error messages.
Reported again by longfin, which complained about walsender.c while I
spotted the other two ones while double-checking.
Some error messages related to file handling are using the code path
context to define their state. For example, 2PC-related errors are
referring to "two-phase status files", or "relation mapping file" is
used for catalog-to-filenode mapping, however those prove to be
difficult to translate, and are not more helpful than just referring to
the path of the file being worked on. So simplify all those error
messages by just referring to files with their path used. In some
cases, like the manipulation of WAL segments, the context is actually
helpful so those are kept.
Calls to the system function read() have also been rather inconsistent
with their error handling sometimes not reporting the number of bytes
read, and some other code paths trying to use an errno which has not
been set. The in-core functions are using a more consistent pattern
with this patch, which checks for both errno if set or if an
inconsistent read is happening.
So as to care about pluralization when reading an unexpected number of
byte(s), "could not read: read %d of %zu" is used as error message, with
%d field being the output result of read() and %zu the expected size.
This simplifies the work of translators with less variations of the same
message.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180520000522.GB1603@paquier.xyz
Getting a pg_index tuple from syscache when the open index relation is
available is pointless -- just use the one from relcache.
Noticed while reviewing code for cb9db2ab06.
No backpatch.
The existing error message was complaining that the column is not an
expression, which is not correct. Introduce a suitable wording
variation and a test.
Co-authored-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20180628182803.e4632d5a.nagata@sraoss.co.jp
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
The original code was unable to prune partitions that could not possibly
contain NULL values, when the query specified less than all columns in a
multicolumn partition key. Reorder the if-tests so that it is, and add
more commentary and regression tests.
Reported-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Co-authored-by: Dilip Kumar <dilipbalaut@gmail.com>
Co-authored-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Reviewed-by: amul sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/CAFjFpRc7qjLUfXLVBBC_HAnx644sjTYM=qVoT3TJ840HPbsTXw@mail.gmail.com
Since the old logic was completely unaware of subtransactions, a
change made in a subsequently-aborted subtransaction would still cause
workers to be stopped at toplevel transaction commit. Fix that by
managing a stack of worker lists rather than just one.
Amit Khandekar and Robert Haas
Discussion: http://postgr.es/m/CAJ3gD9eaG_mWqiOTA2LfAug-VRNn1hrhf50Xi1YroxL37QkZNg@mail.gmail.com
Update links that resulted in redirects. Most are changes from http to
https, but there are also some other minor edits. (There are still some
redirects where the target URL looks less elegant than the one we
currently have. I have left those as is.)
In final_cost_hashjoin(), commit 9c7f5229a allowed inner_unique cases
to follow a code path previously used only for SEMI/ANTI joins; but it
neglected to fix an if-test within that path that assumed SEMI and ANTI
were the only possible cases. This resulted in a wrong value for
hashjointuples, and an ensuing bad cost estimate, for inner_unique normal
joins. Fortunately, for inner_unique normal joins we can assume the number
of joined tuples is the same as for a SEMI join; so there's no need for
more code, we just have to invert the test to check for ANTI not SEMI.
It turns out that in two contrib tests in which commit 9c7f5229a
changed the plan expected for a query, the change was actually wrong
and induced by this estimation error, not by any real improvement.
Hence this patch also reverts those changes.
Per report from RK Korlapati. Backpatch to v10 where the error was
introduced.
David Rowley
Discussion: https://postgr.es/m/CA+SNy03bhq0fodsfOkeWDCreNjJVjsdHwUsb7AG=jpe0PtZc_g@mail.gmail.com
Now that the documentation sources are in XML rather than SGML, some of
the documentation about the editor, or more specifically Emacs, setup
needs updating. The updated instructions recommend using nxml-mode,
which works mostly out of the box, with some small tweaks in
emacs.samples and .dir-locals.el.
Also remove some obsolete stuff in .dir-locals.el. I did, however,
leave the sgml-mode settings in there so that someone using Emacs
without emacs.samples gets those settings when editing a *.sgml file.
As of commit 37a795a60, populate_recordset_worker() tried to pass back
(as rsi.setDesc) a tupdesc that it also had cached in its fn_extra.
But the core executor would free the passed-back tupdesc, risking a
crash if the function were called again in the same query. The safest
and least invasive way to fix that is to make an extra tupdesc copy
to pass back.
While at it, I failed to resist the temptation to get rid of unnecessary
get_fn_expr_argtype() calls here and in populate_record_worker().
Per report from Dmitry Dolgov; thanks to Michael Paquier and
Andrew Gierth for investigation and discussion.
Discussion: https://postgr.es/m/CA+q6zcWzN9ztCfR47ZwgTr1KLnuO6BAY6FurxXhovP4hxr+yOQ@mail.gmail.com
The patch that ended up as commit 3de241dba8 ("Foreign keys on
partitioned tables") lacked pg_dump tests, so the pg_dump code that was
there to support it inadvertently stopped working when in later
development I modified the backend code not to emit pg_trigger rows for
the partitioned table itself.
Bug analysis and code fix is by Michaël. I (Álvaro) added the test.
Reported-by: amul sul <sulamul@gmail.com>
Co-authored-by: Michaël Paquier <michael@paquier.xyz>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAAJ_b94n=UsNVhgs97vCaWEZAMe-tGDRVuZ73oePQH=eaJKGSA@mail.gmail.com
Previously convert_tuples_by_name_map naively performed a search of each
outdesc column starting at the first column in indesc and searched each
indesc column until a match was found. When partitioned tables had many
columns this could result in slow generation of the tuple conversion maps.
For INSERT and UPDATE statements that touched few rows, this could mean a
very large overhead indeed.
We can do a bit better with this loop. It's quite likely that the columns
in partitioned tables and their partitions are in the same order, so it
makes sense to start searching for each column outer column at the inner
column position 1 after where the previous match was found (per idea from
Alexander Kuzmenkov). This makes the best case search O(N) instead of
O(N^2). The worst case is still O(N^2), but it seems unlikely that would
happen.
Likewise, in the planner, make_inh_translation_list's search for the
matching column could often end up falling back on an O(N^2) type search.
This commit also improves that by first checking the column that follows
the previous match, instead of the column with the same attnum. If we
fail to match here we fallback on the syscache's hashtable lookup.
Author: David Rowley
Reviewed-by: Alexander Kuzmenkov
Discussion: https://www.postgresql.org/message-id/CAKJS1f9-wijVgMdRp6_qDMEQDJJ%2BA_n%3DxzZuTmLx5Fz6cwf%2B8A%40mail.gmail.com
When reading an existing FSM or VM page that was found to be corrupt by the
buffer manager, the code applied PageInit() to reinitialize the page, but
did so without any locking. There is thus a hazard that two backends might
concurrently do PageInit, which in itself would still be OK, but the slower
one might then zero over subsequent data changes applied by the faster one.
Even that is unlikely to be fatal; but it's not desirable, so add locking
to prevent it.
This does not add any locking overhead in the normal code path where the
page is OK. It's not immediately obvious that that's safe, but I believe
it is, for reasons explained in the added comments.
Problem noted by R P Asim. It's been like this for a long time, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CANXE4Te4G0TGq6cr0-TvwP0H4BNiK_-hB5gHe8mF+nz0mcYfMQ@mail.gmail.com
Starting and aborting transactions in security definer procedures
doesn't work. StartTransaction() insists that the security context
stack is empty, so this would currently cause a crash, and
AbortTransaction() resets it. This could be made to work by
reorganizing the code, but right now we just prohibit it.
Reported-by: amul sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b96Gupt_LFL7uNyy3c50-wbhA68NUjiK5%3DrF6_w%3Dpq_T%3DQ%40mail.gmail.com
All attributes and arguments using a slot name map to the data type
"name", but this function has been using "text". This is cosmetic, as
even if text is used then the slot name would be truncated to 64
characters anyway and stored as such. The documentation already said
so and the function already assumed that the argument was of this type
when fetching its value.
Bump catalog version.
Author: Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoADYz_-eAqH5AVFaCaojcRgwpo9PW=u8kgTMys63oB8Cw@mail.gmail.com
Temporary WAL segments are created in pg_wal and named as xlogtemp.pid
before being renamed to the real deal when creating a new segment. If
an instance crashes after the temporary segment is created and before
the rename is done, then the server would finish with unremovable data.
After an instance crash, scan pg_wal and remove any such segments. With
repetitive unlucky crashes this would contribute to disk bloat and
presents risks of ENOSPC especially with max_wal_size close to the
maximum allowed.
Author: Michael Paquier
Reviewed-by: Yugo Nagata, Heikki Linnakangas
Discussion: https://postgr.es/m/20180514054955.GF1528@paquier.xyz
In ad9a274778, shmem_exit_inprogress was
introduced. But we need to reset it after shmem_exit(), because unlike
the similar proc_exit(), shmem_exit() can also be called for cleanup
when the process will not exit.
Reported-by: Andrew Gierth <andrew@tao11.riddles.org.uk>
When truncating a table that is referenced by foreign keys in
partitioned tables, the check to ensure the referencing table are also
truncated spuriously failed. This is because it was relying on
relhastriggers as a proxy for the table having FKs, and that's wrong for
partitioned tables. Fix it to consider such tables separately. There
may be a better way ... but this code is pretty inefficient already.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/20180711000624.zmeizicibxeehhsg@alvherre.pgsql
An update that causes the tuple to be moved to a different partition was
missing out on re-constructing the to-be-updated tuple, based on the latest
tuple in the update chain. Instead, it's simply deleting the latest tuple
and inserting a new tuple in the new partition based on the old tuple.
Commit 2f17844104 didn't consider this case, so some of the updates were
getting lost.
In passing, change the argument order for output parameter in ExecDelete
and add some commentary about it.
Reported-by: Pavan Deolasee
Author: Amit Khandekar, with minor changes by me
Reviewed-by: Dilip Kumar, Amit Kapila and Alvaro Herrera
Backpatch-through: 11
Discussion: https://postgr.es/m/CAJ3gD9fRbEzDqdeDq1jxqZUb47kJn+tQ7=Bcgjc8quqKsDViKQ@mail.gmail.com
When it comes to SELECT ... FOR or LOCK, NOWAIT means to not wait for
something to happen, and issue an error. SKIP LOCKED means to not wait
for something to happen but to move on without issuing an error. The
internal option of autovacuum and autoanalyze mentioned above, used only
when wraparound is not involved was named NOWAIT, but behaves like SKIP
LOCKED which is confusing.
Author: Nathan Bossart
Discussion: https://postgr.es/m/20180307050345.GA3095@paquier.xyz
The code path where the assertion is added helps to check that
autovacuum always includes a relation OID when doing a vacuum on it.
Extracted from a larger patch set to add support for SKIP LOCKED with
manual VACUUM commands.
Author: Nathan Bossart
Discussion: https://postgr.es/m/9EF7EBE4-720D-4CF1-9D0E-4403D7E92990@amazon.com
WAL senders sending logically-decoded data fail to properly report in
"streaming" state when starting up, hence as long as one extra record is
not replayed, such WAL senders would remain in a "catchup" state, which
is inconsistent with the physical cousin.
This can be easily reproduced by for example using pg_recvlogical and
restarting the upstream server. The TAP tests have been slightly
modified to detect the failure and strengthened so as future tests also
make sure that a node is in streaming state when waiting for its
catchup.
Backpatch down to 9.4 where this code has been introduced.
Reported-by: Sawada Masahiko
Author: Simon Riggs, Sawada Masahiko
Reviewed-by: Petr Jelinek, Michael Paquier, Vaishnavi Prabakaran
Discussion: https://postgr.es/m/CAD21AoB2ZbCCqOx=bgKMcLrAvs1V0ZMqzs7wBTuDySezTGtMZA@mail.gmail.com
Generally, if the comparison operators for a datatype or pair of datatypes
are leakproof, the corresponding btree comparison support function can be
considered so as well. But we had not originally worried about marking
support functions as leakproof, reasoning that they'd not likely be used in
queries so the marking wouldn't matter. It turns out there's at least one
place where it does matter: calc_arraycontsel() finds the target datatype's
default btree comparison function and tries to use that to estimate
selectivity, but it will be blocked in some cases if the function isn't
leakproof. This leads to unnecessarily poor selectivity estimates and bad
plans, as seen in bug #15251.
Hence, run around and apply proleakproof markings where the corresponding
btree comparison operators are leakproof. (I did eyeball each function
to verify that it wasn't doing anything surprising, too.)
This isn't a full solution to bug #15251, and it's not back-patchable
because of the need for a catversion bump. A more useful response probably
is to consider whether we can check permissions on the parent table instead
of the child. However, this change will help in some cases where that
won't, and it's easy enough to do in HEAD, so let's do so.
Discussion: https://postgr.es/m/3876.1531261875@sss.pgh.pa.us
We should only run apply_pathtarget_labeling_to_tlist if CP_LABEL_TLIST
was specified, because only in that case has use_physical_tlist checked
that the labeling will succeed; otherwise we may get an "ORDER/GROUP BY
expression not found in targetlist" error. (This subsumes the previous
test about gating_clauses, because we reset "flags" to zero earlier
if there are gating clauses to apply.)
The only known case in which a failure can occur is with a ProjectSet
path directly atop a table scan path, although it seems likely that there
are other cases or will be such in future. This means that the failure
is currently only visible in the v10 branch: 9.6 didn't have ProjectSet,
while in v11 and HEAD, apply_scanjoin_target_to_paths for some weird
reason is using create_projection_path not apply_projection_to_path,
masking the problem because there's a ProjectionPath in between.
Nonetheless this code is clearly wrong on its own terms, so back-patch
to 9.6 where this logic was introduced.
Per report from Regina Obe.
Discussion: https://postgr.es/m/001501d40f88$75186950$5f493bf0$@pcorp.us
nodeWindowAgg.c failed to cope with the possibility that no ordering
columns are defined in the window frame for GROUPS mode or RANGE OFFSET
mode, leading to assertion failures or odd errors, as reported by Masahiko
Sawada and Lukas Eder. In RANGE OFFSET mode, an ordering column is really
required, so add an Assert about that. In GROUPS mode, the code would
work, except that the node initialization code wasn't in sync with the
execution code about when to set up tuplestore read pointers and spare
slots. Fix the latter for consistency's sake (even though I think the
changes described below make the out-of-sync cases unreachable for now).
Per SQL spec, a single ordering column is required for RANGE OFFSET mode,
and at least one ordering column is required for GROUPS mode. The parser
enforced the former but not the latter; add a check for that.
We were able to reach the no-ordering-column cases even with fully spec
compliant queries, though, because the planner would drop partitioning
and ordering columns from the generated plan if they were redundant with
earlier columns according to the redundant-pathkey logic, for instance
"PARTITION BY x ORDER BY y" in the presence of a "WHERE x=y" qual.
While in principle that's an optimization that could save some pointless
comparisons at runtime, it seems unlikely to be meaningful in the real
world. I think this behavior was not so much an intentional optimization
as a side-effect of an ancient decision to construct the plan node's
ordering-column info by reverse-engineering the PathKeys of the input
path. If we give up redundant-column removal then it takes very little
code to generate the plan node info directly from the WindowClause,
ensuring that we have the expected number of ordering columns in all
cases. (If anyone does complain about this, the planner could perhaps
be taught to remove redundant columns only when it's safe to do so,
ie *not* in RANGE OFFSET mode. But I doubt anyone ever will.)
With these changes, the WindowAggPath.winpathkeys field is not used for
anything anymore, so remove it.
The test cases added here are not actually very interesting given the
removal of the redundant-column-removal logic, but they would represent
important corner cases if anyone ever tries to put that back.
Tom Lane and Masahiko Sawada. Back-patch to v11 where RANGE OFFSET
and GROUPS modes were added.
Discussion: https://postgr.es/m/CAD21AoDrWqycq-w_+Bx1cjc+YUhZ11XTj9rfxNiNDojjBx8Fjw@mail.gmail.com
Discussion: https://postgr.es/m/153086788677.17476.8002640580496698831@wrigleys.postgresql.org
We include <float.h> in every place that needs isnan(), because MSVC
used to require it. However, since MSVC 2013 that's no longer necessary
(cf. commit cec8394b5c), so we can retire the inclusion to a
version-specific stanza in win32_port.h, where it doesn't need to
pollute random .c files. The header is of course still needed in a few
places for other reasons.
I (Álvaro) removed float.h from a few more files than in Emre's original
patch. This doesn't break the build in my system, but we'll see what
the buildfarm has to say about it all.
Author: Emre Hasegeli
Discussion: https://postgr.es/m/CAE2gYzyc0+5uG+Cd9-BSL7NKC8LSHLNg1Aq2=8ubjnUwut4_iw@mail.gmail.com
Header comment of shm_mq.c was mistakenly specifying path to shm_mq.h.
It was introduced in ec9037df. So, theoretically it could be
backpatched to 9.4, but it doesn't seem to worth it.
Such replication slots are physical slots freshly created without WAL
being reserved, which is the default behavior, which have not been used
yet as WAL consumption resources to retain WAL. This prevents advancing
a slot to a position older than any WAL available, which could falsify
calculations for WAL segment recycling.
This also cleans up a bit the code, as ReplicationSlotRelease() would be
called on ERROR, and improves error messages.
Reported-by: Kyotaro Horiguchi
Author: Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180626071305.GH31353@paquier.xyz
We fail to handle polymorphic types properly when they are used as
partition keys: we were unnecessarily adding a RelabelType node on top,
which confuses code examining the nodes. In particular, this makes
predtest.c-based partition pruning not to work, and ruleutils.c to emit
expressions that are uglier than needed. Fix it by not adding RelabelType
when not needed.
In master/11 the new pruning code is separate so it doesn't suffer from
this problem, since we already fixed it (in essentially the same way) in
e5dcbb88a1, which also added a few tests; back-patch those tests to
pg10 also. But since UPDATE/DELETE still uses predtest.c in pg11, this
change improves partitioning for those cases too. Add tests for this.
The ruleutils.c behavior change is relevant in pg11/master too.
Co-authored-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/54745d13-7ed4-54ac-97d8-ea1eec95ae25@lab.ntt.co.jp
PostgreSQL nowadays offers some kind of dynamic shared memory feature on
all supported platforms. Having the choice of "none" prevents us from
relying on DSM in core features. So this patch removes the choice of
"none".
Author: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
The EEOP_INNER_SYSVAR and EEOP_OUTER_SYSVAR executor opcodes are not
exercised by normal queries, because setrefs.c will resolve the references
to system columns in the scan nodes already. Join nodes refer to them by
their position in the child node's target list, like user columns.
The only place where those opcodes are used, is in evaluating a trigger's
WHEN condition that references system columns. Trigger evaluation abuses
the INNER/OUTER Vars to refer to the OLD and NEW tuples. The code to handle
the opcodes is pretty straightforward, but it seems like a good idea to
have some test coverage for them, anyway, so that they don't get removed or
broken by accident.
Author: Ashutosh Bapat, with some changes by me.
Discussion: https://www.postgresql.org/message-id/CAFjFpRerUFX=T0nSnCoroXAJMoo-xah9J+pi7+xDUx86PtQmew@mail.gmail.com
This is an option consistent with what pg_dump and pg_basebackup provide
which is useful for leveraging the I/O effort when testing things, not
to be used in a production environment.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/20180325122607.GB3707@paquier.xyz
The previous sync logic relied on looking for and then launching
externally initdb -S, which is a simple wrapper on top of fsync_pgdata.
There is nothing preventing pg_rewind to directly call this routine, so
remove the dependency to initdb and just call it directly.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/20180325122607.GB3707@paquier.xyz
Commit fafa374f2 caused _bt_getbuf() to possibly emit a WAL record for
a page that it was about to recycle. However, it failed to distinguish
all-zero pages from dead pages, which is important because only the
latter have valid btpo.xact values, or indeed any special space at all.
Recycling an all-zero page with XLogStandbyInfoActive() enabled therefore
led to an Assert failure, or to emission of a WAL record containing a
bogus cutoff XID, which might lead to unnecessary query cancellations
on hot standby servers.
Per reports from Antonin Houska and 自己. Amit Kapila was first to
propose this fix, and Robert Haas, myself, and Kyotaro Horiguchi
reviewed it at various times.
This is an old bug, so back-patch to all supported branches.
Discussion: https://postgr.es/m/2628.1474272158@localhost
Discussion: https://postgr.es/m/48875502.f4a0.1635f0c27b0.Coremail.zoulx1982@163.com
A critical failure in some of the end-of-recovery actions before the
end-of-recovery record is written can cause PostgreSQL to react
inconsistently with the rest of the cluster in the event of a crash
before the final record is written. Two such failures are for example
an error while processing a two-phase state files or when operating on
recovery.conf. With this commit, the failures are still considered
FATAL, but the write of the timeline history file is delayed as much as
possible so as the window between the moment the file is written and the
end-of-recovery record is generated gets minimized. This way, in the
event of a crash or a failure, the new timeline decided at promotion
will not seem taken by other nodes in the cluster. It is not really
possible to reduce to zero this window, hence one could still see
failures if a crash happens between the history file write and the
end-of-recovery record, so any future code should be careful when
adding new end-of-recovery actions. The original report from Magnus
Hagander mentioned a renamed recovery.conf as original end-of-recovery
failure which caused a timeline to be seen as taken but the subsequent
processing on the now-missing recovery.conf cause the startup process to
issue stop on FATAL, which at follow-up startup made the system
inconsistent because of on-disk changes which already happened.
Processing of two-phase state files still needs some work as corrupted
entries are simply ignored now. This is left as a future item and this
commit fixes the original complain.
Reported-by: Magnus Hagander
Author: Heikki Linnakangas
Reviewed-by: Alexander Korotkov, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CABUevEz09XY2EevA2dLjPCY-C5UO4Hq=XxmXLmF6ipNFecbShQ@mail.gmail.com
Commit bc292937ae failed to update a comment about unique index
checking. _bt_insertonpg() is no longer responsible for finding an
insertion location while preventing conflicting insertions.
While we probably don't want to split up all error messages into
function and procedure variants, this one is a very prominent one, so
it's helpful to be more specific here.
When executing CALL in PL/pgSQL, we need to set a snapshot before
invoking the to-be-called procedure. Otherwise, the to-be-called
procedure might end up running without a snapshot. For LANGUAGE SQL
procedures, this would result in an assertion failure. (For most other
languages, this is usually not a problem, because those use SPI and SPI
sets snapshots in most cases.) Setting the snapshot restores the
behavior of how CALL worked when it was handled as a generic SQL
statement in PL/pgSQL (exec_stmt_execsql()).
This change revealed another problem: In SPI_commit(), we popped the
active snapshot before committing the transaction, to avoid "snapshot %p
still active" errors. However, there is no particular reason why only
at most one snapshot should be on the stack. So change this to pop all
active snapshots instead of only one.
Starting with commit 9915de6c1c, replication slot drop uses a
condition variable sleep to wait until the current user of the slot goes
away. This is more user friendly than the previous behavior of erroring
out if the slot is in use, but it fails with a not-for-user-consumption
error message in single-user mode; plus, if you're using single-user
mode because you don't want to start the server in the regular mode
(say, disk is full and WAL won't recycle because of the slot), it's
inconvenient.
Fix by skipping the cond variable sleep in single-user mode, since
there can't be anybody to wait for anyway.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3b2f809f-326c-38dd-7a9e-897f957a4eb1@enterprisedb.com
Coverity complains that there is no protection in the code (at least in
non-assertion-enabled builds) against speculative insertion failing to
follow the expected protocol. Add an elog(ERROR) for the case.
If a standby crashes after promotion before having completed its first
post-recovery checkpoint, then the minimal recovery point which marks
the LSN position where the cluster is able to reach consistency may be
set to a position older than the first end-of-recovery checkpoint while
all the WAL available should be replayed. This leads to the instance
thinking that it contains inconsistent pages, causing a PANIC and a hard
instance crash even if all the WAL available has not been replayed for
certain sets of records replayed. When in crash recovery,
minRecoveryPoint is expected to always be set to InvalidXLogRecPtr,
which forces the recovery to replay all the WAL available, so this
commit makes sure that the local copy of minRecoveryPoint from the
control file is initialized properly and stays as it is while crash
recovery is performed. Once switching to archive recovery or if crash
recovery finishes, then the local copy minRecoveryPoint can be safely
updated.
Pavan Deolasee has reported and diagnosed the failure in the first
place, and the base fix idea to rely on the local copy of
minRecoveryPoint comes from Kyotaro Horiguchi, which has been expanded
into a full-fledged patch by me. The test included in this commit has
been written by Álvaro Herrera and Pavan Deolasee, which I have modified
to make it faster and more reliable with sleep phases.
Backpatch down to all supported versions where the bug appears, aka 9.3
which is where the end-of-recovery checkpoint is not run by the startup
process anymore. The test gets easily supported down to 10, still it
has been tested on all branches.
Reported-by: Pavan Deolasee
Diagnosed-by: Pavan Deolasee
Reviewed-by: Pavan Deolasee, Kyotaro Horiguchi
Author: Michael Paquier, Kyotaro Horiguchi, Pavan Deolasee, Álvaro
Herrera
Discussion: https://postgr.es/m/CABOikdPOewjNL=05K5CbNMxnNtXnQjhTx2F--4p4ruorCjukbA@mail.gmail.com
When deleting pages the nbtree code has to walk through siblings of a
tree node. When those sibling links are corrupted that can lead to
endless loops - which are currently not interruptible. This is
especially problematic if autovacuum is repeatedly blocked on such
indexes, as it can be hard to get out of that situation without
resorting to single user mode.
Thus add interrupt checks to appropriate places in such
loops. Unfortunately in one of the cases it's it's not easy to do so.
Between 9.3 and 9.4 the page deletion (and page split) code changed
significantly. Before it was significantly less robust against
interruptions. Therefore don't backpatch to 9.3.
Author: Andres Freund
Discussion: https://postgr.es/m/20180627191629.wkunw2qbibnvlz53@alap3.anarazel.de
Backpatch: 9.4-
When multiple relations are deleted at the same transaction,
the files of those relations are deleted by one call to smgrdounlinkall(),
which leads to scan whole shared_buffers only one time. OTOH,
previously, during recovery, smgrdounlink() (not smgrdounlinkall()) was
called for each file to delete, which led to scan shared_buffers
multiple times. Obviously this could cause to increase the WAL replay
time very much especially when shared_buffers was huge.
To alleviate this situation, this commit changes the recovery so that
it also calls smgrdounlinkall() only one time to delete multiple
relation files.
This is just fix for oversight of commit 279628a0a7, not new feature.
So, per discussion on pgsql-hackers, we concluded to backpatch this
to all supported versions.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Andres Freund, Thomas Munro, Kyotaro Horiguchi, Takayuki Tsunakawa
Discussion: https://postgr.es/m/CAHGQGwHVQkdfDqtvGVkty+19cQakAydXn1etGND3X0PHbZ3+6w@mail.gmail.com
Since recent commit 1c7c317c, temporary relations cannot be mixed with
permanent relations within the same partition tree, and the same counts
for temporary relations created by other sessions, which the planner
simply discarded. Instead be paranoid and issue an error, as those
should be blocked at definition time, at least for now.
At the same time, a test case is added to stress what has been moved
when expand_partitioned_rtentry gets called recursively but bumps on a
partitioned relation with no partitions which should be handled the same
way as the non-inheritance case. This code may be reworked in a close
future, and covering this code path will limit surprises.
Reported-by: David Rowley
Author: David Rowley
Reviewed-by: Amit Langote, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f_HyV1txn_4XSdH5EOhBMYaCwsXyAj6bHXk9gOu4JKsbw@mail.gmail.com
This has been visibly a forgotten spot in the first implementation of
wait events for I/O added by 249cf07, and what has been missing is a
fsync call for WAL segments which is a wrapper reacting on the value of
GUC wal_sync_method.
Reported-by: Konstantin Knizhnik
Author: Konstantin Knizhnik
Reviewed-by: Craig Ringer, Michael Paquier
Discussion: https://postgr.es/m/4a243897-0ad8-f471-aa40-242591f2476e@postgrespro.ru
When these programs call pg_catalog.set_config, they need to check for
PGRES_TUPLES_OK instead of PGRES_COMMAND_OK. Fix for
5770172cb0.
Reported-by: Ideriha, Takeshi <ideriha.takeshi@jp.fujitsu.com>
While working on 1c7c317c and related things, which has clarified the
use of partitions with temporary tables, I have noticed that there could
be better coverage for inheritance trees mixing temporary and permanent
relations. A lot of cross-checks happen in MergeAttributes() which is
not designed for this purpose, so the tests added in this commit will
make sure that any kind of future refactoring will limit the amount of
compatibility breakage.
Author: Michael Paquier
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/20180619022131.GE3314@paquier.xyz
In TAP test functions, that is, those that produce test results, locally
increment $Test::Builder::Level. This has the effect that test failures
are reported at the callers location rather than somewhere in the test
support libraries.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
In a partition, row triggers that had been cloned from their parent
partitioned table would not be listed at all in psql's \d, which could
surprise users, per insistent complaint from Ashutosh Bapat (though his
aim was elsewhere). The simplest possible fix, suggested by Peter
Eisentraut, seems to be to list triggers marked as internal if they have
a row in pg_depend that points to some other trigger.
Author: Álvaro Herrera
Discussion: https://postgr.es/m/20180618165910.p26vhk7dpq65ix54@alvherre.pgsql
search.cpan.org has been EOL'd, with metacpan.org being the official
replacement to which URLs now redirect. Update links to match the new
URL. Also update links to CPAN to use https as it will redirect from
http.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/B74C0219-6BA9-46E1-A524-5B9E8CD3BDB3@yesql.se
As added in 1de09ad8eb the new functions
all accept signed integers as parameters. That's not great, because
it's perfectly reasonable to call them with unsigned parameters.
Unfortunately unsigned to signed conversion is not well defined, when
exceeding the range of the signed value. That's presently not a
practical issue in postgres (among other reasons because we force
gcc's hand with -fwrapv). But it's clearly not quite right.
Thus change the signatures to accept unsigned integers instead, signed
to unsigned conversion is always well defined. Also change the
backward compat pq_sendint() - while it's deprecated it seems better
to be consistent.
Per discussion between Andrew Gierth, Michael Paquier, Alvaro Herrera
and Tom Lane.
Reported-By: Andrew Gierth
Author: Andres Freund
Discussion: https://postgr.es/m/87r2m10zm2.fsf@news-spur.riddles.org.uk
Two closely related bugs are fixed. First, xmin of logical slots was
advanced too early. During xl_running_xacts processing, xmin of the
slot was set to the oldest running xid in the record, but that's wrong:
actually, snapshots which will be used for not-yet-replayed transactions
might consider older txns as running too, so we need to keep xmin back
for them. The problem wasn't noticed earlier because DDL which allows
to delete tuple (set xmax) while some another not-yet-committed
transaction looks at it is pretty rare, if not unique: e.g. all forms of
ALTER TABLE which change schema acquire ACCESS EXCLUSIVE lock
conflicting with any inserts. The included test case (test_decoding's
oldest_xmin) uses ALTER of a composite type, which doesn't have such
interlocking.
To deal with this, we must be able to quickly retrieve oldest xmin
(oldest running xid among all assigned snapshots) from ReorderBuffer. To
fix, add another list of ReorderBufferTXNs to the reorderbuffer, where
transactions are sorted by base-snapshot-LSN. This is slightly
different from the existing (sorted by first-LSN) list, because a
transaction can have an earlier LSN but a later Xmin, if its first
record does not obtain an xmin (eg. xl_xact_assignment). Note this new
list doesn't fully replace the existing txn list: we still need that one
to prevent WAL recycling.
The second issue concerns SnapBuilder snapshots and subtransactions.
SnapBuildDistributeNewCatalogSnapshot never assigned a snapshot to a
transaction that is known to be a subtxn, which is good in the common
case that the top-level transaction already has one (no point in doing
so), but a bug otherwise. To fix, arrange to transfer the snapshot from
the subtxn to its top-level txn as soon as the kinship gets known.
test_decoding's snapshot_transfer verifies this.
Also, fix a minor memory leak: refcount of toplevel's old base snapshot
was not decremented when the snapshot is transferred from child.
Liberally sprinkle code comments, and rewrite a few existing ones. This
part is my (Álvaro's) contribution to this commit, as I had to write all
those comments in order to understand the existing code and Arseny's
patch.
Reported-by: Arseny Sher <a.sher@postgrespro.ru>
Diagnosed-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/87lgdyz1wj.fsf@ars-thinkpad
randomAccess parallel tuplesorts are disallowed because the leader would
try to write to its own leader tape, not because the leader would try to
write to a worker tape directly.
Cleanup from commit 9da0cc3528.
Building a new nbtree index through incremental insertions would always
be slower than our actual approach of sorting using tuplesort,
assembling leaf pages from tuplesort output, and writing and WAL-logging
whole pages. Remove a comment block from the Berkeley days claiming
that incremental insertions might be slightly faster with presorted
input.
Discussion: https://postgr.es/m/CAH2-WzmKs4mLAoFgJ3yHMRYc849efc=dw+pNRb3NEog2oJoCNw@mail.gmail.com
Concurrently with partitioned index development (commit 8b08f7d482),
the code to handle failure to rename indexes was refactored (commit
8b9e9644dc). Turns out that that particular case was untested, which
naturally led it to be broken. Add tests and the missing code line.
Co-authored-by: David Rowley <dgrowley@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Discussion: https://postgr.es/m/CAKcux6mfYMS3OX0ywjOiWiGSEKhJf-1zdeTceHFbd0mScUzU5A@mail.gmail.com
find_appinfos_by_relids had quite a large overhead when the number of
items in the append_rel_list was high, as it had to trawl through the
append_rel_list looking for AppendRelInfos belonging to the given
childrelids. Since there can only be a single AppendRelInfo for each
child rel, it seems much better to store an array in PlannerInfo which
indexes these by child relid, making the function O(1) rather than O(N).
This function was only called once inside the planner, so just replace
that call with a lookup to the new array. find_childrel_appendrelinfo
is now unused and thus removed.
This fixes a planner performance regression new to v11 reported by
Thomas Reiss.
Author: David Rowley
Reported-by: Thomas Reiss
Reviewed-by: Ashutosh Bapat
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/94dd7a4b-5e50-0712-911d-2278e055c622@dalibo.com
Upper limits for vacuum_cleanup_index_scale_factor GUC and reloption
were initially set to 100.0 in 857f9c36. However, after further
discussion, it appears that some users like to disable B-tree cleanup
index scan completely (assuming there are no deleted pages).
vacuum_cleanup_index_scale_factor is used barely to protect against
stalled index statistics. And after detailed consideration it appears
that risk of stalled index statistics is low. And it would be nice to
allow advanced users setting higher values of
vacuum_cleanup_index_scale_factor. So, set upper limit for these
GUC and reloption to DBL_MAX.
Author: Alexander Korotkov
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAC8Q8tJCb%3DgxhzcV7T6ctx7PY-Ux1oA-AsTJc6cAVNsQiYcCzA%40mail.gmail.com
The previous message for SPI_ERROR_TRANSACTION claimed "cannot begin/end
transactions in PL/pgSQL", but that is no longer true. Nevertheless,
the error can still happen, so reword the messages. The error cases in
exec_prepare_plan() could never happen, so remove them.
This file has been missing the fact that it needs to report back to
callers a proper failure on fsync calls. I have spotted the one in
tar_finish() while Kuntal has spotted the one in tar_close().
Backpatch down to 10 where this code has been introduced.
Reported by: Michael Paquier, Kuntal Ghosh
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh, Magnus Hagander
Discussion: https://postgr.es/m/20180625024356.GD1146@paquier.xyz
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
Two out of three code paths were mapping column numbers correctly if a
partition had different column numbers than parent table, but the most
commonly used one (recursing in CREATE INDEX to a new index on a
partition) failed to map attribute numbers in expressions. Oddly
enough, attnums in WHERE clauses are already handled correctly
everywhere.
Reported-by: Amit Langote
Author: Amit Langote
Discussion: https://postgr.es/m/dce1fda4-e0f0-94c9-6abb-f5956a98c057@lab.ntt.co.jp
Reviewed-by: Álvaro Herrera
Previously, if some or all partitions had no partially aggregated path,
we would still try to generate a partially aggregated path for the
parent, leading to assertion failures or wrong answers.
Report by Rajkumar Raghuwanshi. Patch by Jeevan Chalke, reviewed
by Ashutosh Bapat. A few changes by me.
Discussion: http://postgr.es/m/CAKcux6=q4+Mw8gOOX16ef6ZMFp9Cve7KWFstUsrDa4GiFaXGUQ@mail.gmail.com
Commit 16828d5c02 neglected to do this, so upgraded databases would
silently get null instead of the specified default in rows without the
attribute defined.
A new binary upgrade function is provided to perform this and pg_dump is
adjusted to output a call to the function if required in binary upgrade
mode.
Also included is code to drop missing attribute values for dropped
columns. That way if the type is later dropped the missing value won't
have a dangling reference to the type.
Finally the regression tests are adjusted to ensure that there is a row
with a missing value so that this code is exercised in upgrade testing.
Catalog version unfortunately bumped.
Regression test changes from Tom Lane.
Remainder from me, reviewed by Tom Lane, Andres Freund, Alvaro Herrera
Discussion: https://postgr.es/m/19987.1529420110@sss.pgh.pa.us
vacuum_cleanup_index_scale_factor was located in autovacuum group of
GUCs. However, it affects not only autovacuum, but also manually run
VACUUM. It appears that "client connection defaults" group of GUCs
is more appropriate for vacuum_cleanup_index_scale_factor, because
vacuum_*_age options are already located there.
Also, vacuum_cleanup_index_scale_factor was missed in
postgresql.conf.sample. So, add it there with appropriate comment.
Author: Masahiko Sawada with minor editorization by me
Discussion: https://postgr.es/m/CAD21AoArsoXMLKudXSKN679FRzs6oubEchM53bHwn8Tp%3D2boNg%40mail.gmail.com
The create_append_path code didn't consider that list_concat will
modify it's first argument leading to inconsistent traversal of
resulting list. In practice, it won't lead to any user-visible bug
but changing it for making the code behave consistently.
Reported-by: Tom Lane
Author: Tom Lane
Reviewed-by: Amit Khandekar and Amit Kapila
Discussion: https://postgr.es/m/32365.1528994120@sss.pgh.pa.us
A typo in numeric_poly_combine caused bogus results for queries using
it, but of course would only manifest if parallel aggregation is
performed. Reported by Rajkumar Raghuwanshi.
David Rowley did the diagnosis and the fix; I editorialized rather
heavily on his regression test additions.
Back-patch to v10 where the breakage was introduced (by 9cca11c91).
Discussion: https://postgr.es/m/CAKcux6nU4E2x8nkSBpLOT2DPvQ5LviJ3SGyAN6Sz7qDH4G4+Pw@mail.gmail.com
According to the SQL standard, the context of XMLTABLE's XPath
row_expression is the document node of the XML input document, not the
root node. This becomes visible when a relative path rather than
absolute is used as row expression. Absolute paths is what was used in
original tests and docs (and the most common form used in examples
throughout the interwebs), which explains why this wasn't noticed
before.
Other functions such as xpath() and xpath_exists() also have this
problem. While not specified by the SQL standard, it would be pretty
odd to leave those functions to behave differently than XMLTABLE, so
change them too. However, this is a backwards-incompatible change.
No backpatch, out of fear of breaking code depending on the original
broken behavior.
Author: Markus Winand
Reported-By: Markus Winand
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/0684A598-002C-42A2-AE12-F024A324EAE4@winand.at
split_pathtarget_at_srfs() neglected to worry about sortgroupref labels
in the intermediate PathTargets it constructs. I think we'd supposed
that their labeling didn't matter, but it does at least for the case that
GroupAggregate/GatherMerge nodes appear immediately under the ProjectSet
step(s). This results in "ERROR: ORDER/GROUP BY expression not found in
targetlist" during create_plan(), as reported by Rajkumar Raghuwanshi.
To fix, make this logic track the sortgroupref labeling of expressions,
not just their contents. This also restores the pre-v10 behavior that
separate GROUP BY expressions will be kept distinct even if they are
textually equal().
Discussion: https://postgr.es/m/CAKcux6=1_Ye9kx8YLBPmJs_xE72PPc6vNi5q2AOHowMaCWjJ2w@mail.gmail.com
Column expressions that match TEXT or CDATA nodes must return the
contents of the nodes themselves, not the content of non-existing
children (i.e. the empty string).
Author: Markus Winand
Reported-by: Markus Winand
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/0684A598-002C-42A2-AE12-F024A324EAE4@winand.at
Commit ab72716778 allowed Parallel Append paths to be generated for a
relation that is not parallel safe. Prevent that from happening.
Initial analysis by Tom Lane.
Reported-by: Rajkumar Raghuwanshi
Author: Amit Kapila and Rajkumar Raghuwanshi
Reviewed-by: Amit Khandekar and Robert Haas
Discussion:https://postgr.es/m/CAKcux6=tPJ6nJ08r__nU_pmLQiC0xY15Fn0HvG1Cprsjdd9s_Q@mail.gmail.com
Since their introduction, partition trees have been a bit lossy
regarding temporary relations. Inheritance trees respect the following
patterns:
1) a child relation can be temporary if the parent is permanent.
2) a child relation can be temporary if the parent is temporary.
3) a child relation cannot be permanent if the parent is temporary.
4) The use of temporary relations also imply that when both parent and
child need to be from the same sessions.
Partitions share many similar patterns with inheritance, however the
handling of the partition bounds make the situation a bit tricky for
case 1) as the partition code bases a lot of its lookup code upon
PartitionDesc which does not really look after relpersistence. This
causes for example a temporary partition created by session A to be
visible by another session B, preventing this session B to create an
extra partition which overlaps with the temporary one created by A with
a non-intuitive error message. There could be use-cases where mixing
permanent partitioned tables with temporary partitions make sense, but
that would be a new feature. Partitions respect 2), 3) and 4) already.
It is a bit depressing to see those error checks happening in
MergeAttributes() whose purpose is different, but that's left as future
refactoring work.
Back-patch down to 10, which is where partitioning has been introduced,
except that default partitions do not apply there. Documentation also
includes limitations related to the use of temporary tables with
partition trees.
Reported-by: David Rowley
Author: Amit Langote, Michael Paquier
Reviewed-by: Ashutosh Bapat, Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f94Ojk0og9GMkRHGt8wHTW=ijq5KzJKuoBoqWLwSVwGmw@mail.gmail.com
Explain the difference between "make check" and "make installcheck".
Mention the need for --enable-tap-tests (only some of these did so
before). Standardize their wording about how to run the tests.
The following set of flags mainly matter when building Postgres code
with MSVC and those have been forgotten with latest developments:
- HAVE_LDAP_INITIALIZE, added by 35c0754f, and marked as disabled.
ldap_initialize() is a non-standard extension that provides a way to use
"ldaps" with OpenLDAP, but it is not supported on Windows, and instead
the non-standard ldap_sslinit() is used if WIN32 is defined. Per input
from Thomas Munro.
- HAVE_X509_GET_SIGNATURE_NID, added by 054e8c6c, which is used by
SCRAM's channel binding tls-server-end-point. Having this flag disabled
would cause this channel binding type to be unsupported for Windows
builds.
- HAVE_SSL_CLEAR_OPTIONS, added recently as of a364dfa4 to disable SSL
compression.
- HAVE_ASN1_STRING_GET0_DATA, added by 5c6df67, which is used to track
a new compatibility with OpenSSL 1.1.0. This was missing from
pg_config.win32.h and is not enabled by default. HAVE_BIO_GET_DATA,
HAVE_OPENSSL_INIT_SSL and HAVE_BIO_METH_NEW gain the same treatment.
The second and third flags are enabled with this commit, which raises
the bar of OpenSSL support to 1.0.2 on Windows as a minimum. As this
is the LTS (long-time support) version of OpenSSL community and knowing
that all recent installers referred by OpenSSL upstream don't have
anymore 1.0.1 or older, we could live with that requirement. In order
to allow the code to compile with OpenSSL 1.1.0, all the flags mentioned
above need to be enabled in pg_config.h.win32.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20180529211559.GF6632@paquier.xyz
There seems little reason for the policy of throwing error if we
find a ref to something other than a hash or array. Recursively
look through the ref, instead. This makes the behavior in non-transform
cases comparable to what was already instantiated for jsonb_plperl.
Note that because we invoke any available transform function before
considering the ref case, it's up to each transform function whether
it wants to play along with this behavior or do something different.
Because the previous behavior was just to throw a useless error,
this seems unlikely to create any compatibility issues. Still, given
the lack of field complaints so far, seems best not to back-patch.
Discussion: https://postgr.es/m/28336.1528393969@sss.pgh.pa.us
ProcedureCreate formerly threw an error if the function to be created
has one argument of composite type and the function name matches some
column of the composite type. This was a (very non-bulletproof) defense
against creating situations where f(x) and x.f are ambiguous. But we
don't really need such a defense in the wake of commit b97a3465d, which
allows us to deal with such situations fairly cleanly. This behavior
also created a dump-and-reload hazard, since a function might be
rejected if a conflicting column name had been added to the input
composite type later. Hence, let's just drop the check.
Discussion: https://postgr.es/m/CAOW5sYa3Wp7KozCuzjOdw6PiOYPi6D=VvRybtH2S=2C0SVmRmA@mail.gmail.com
Postgres has traditionally considered the syntactic forms f(x) and x.f
to be equivalent, allowing tricks such as writing a function and then
using it as though it were a computed-on-demand column. However, our
behavior when both interpretations are feasible left something to be
desired: we always chose the column interpretation. This could lead
to very surprising results, as in a recent bug report from Neil Conway.
It also created a dump-and-reload hazard, since what was a function
call in a dumped view could get interpreted as a column reference
at reload, if a matching column name had been added to the underlying
table since the view was created.
What seems better, in ambiguous situations, is to prefer the choice
matching the syntactic form of the reference. This seems much less
astonishing in general, and it fixes the dump/reload hazard.
Although this could be called a bug fix, there have been few complaints
and there's some small risk of breaking applications that depend on the
old behavior, so no back-patch. It does seem reasonable to slip it
into v11, though.
Discussion: https://postgr.es/m/CAOW5sYa3Wp7KozCuzjOdw6PiOYPi6D=VvRybtH2S=2C0SVmRmA@mail.gmail.com
On Windows, it is sometimes important for corresponding malloc() and
free() calls to be made from the same DLL, since some build options can
result in multiple allocators being active at the same time. For that
reason we already provided PQfreemem(). This commit adds a similar
function for freeing string results allocated by the pgtypes library.
Author: Takayuki Tsunakawa
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8AD5D6%40G01JPEXMBYT05
When a standby's WAL receiver stops reading WAL from a WAL stream, it
writes data to the current WAL segment without having priorily zero'ed
the page currently written to, which can cause the WAL reader to read
junk data from a past recycled segment and then it would try to get a
record from it. While sanity checks in place provide most of the
protection needed, in some rare circumstances, with chances increasing
when a record header crosses a page boundary, then the startup process
could fail violently on an allocation failure, as follows:
FATAL: invalid memory alloc request size XXX
This is confusing for the user and also unhelpful as this requires in
the worst case a manual restart of the instance, impacting potentially
the availability of the cluster, and this also makes WAL data look like
it is in a corrupted state.
The chances of seeing failures are higher if the connection between the
standby and its root node is unstable, causing WAL pages to be written
in the middle. A couple of approaches have been discussed, like
zero-ing new WAL pages within the WAL receiver itself but this has the
disadvantage of impacting performance of any existing instances as this
breaks the sequential writes done by the WAL receiver. This commit
deals with the problem with a more simple approach, which has no
performance impact without reducing the detection of the problem: if a
record is found with a length higher than 1GB for backends, then do not
try any allocation and report a soft failure which will force the
standby to retry reading WAL. It could be possible that the allocation
call passes and that an unnecessary amount of memory is allocated,
however follow-up checks on records would just fail, making this
allocation short-lived anyway.
This patch owes a great deal to Tsunakawa Takayuki for reporting the
failure first, and then discussing a couple of potential approaches to
the problem.
Backpatch down to 9.5, which is where palloc_extended has been
introduced.
Reported-by: Tsunakawa Takayuki
Reviewed-by: Tsunakawa Takayuki
Author: Michael Paquier
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8B57AD@G01JPEXMBYT05
Clean up four places that result in compiler warnings when using recent
gcc with this warning class enabled (as seen on buildfarm members
calliphoridae, skink, and others). In all these places, this is purely
cosmetic, because the shift distance could not be large enough to risk
a change of sign, so there's no chance of implementation-dependent
behavior. Still, it's easy enough to avoid the warning by casting the
shifted value to unsigned, so let's do that.
Patch HEAD only, this isn't worth a back-patch.
Use of strncpy with a length limit based on the source, rather than
the destination, is non-idiomatic and draws warnings from gcc 8.
Replace with memcpy, which does exactly the same thing in these cases,
but with less chance for confusion.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/21789.1529170195@sss.pgh.pa.us
This could only cause an issue if strftime returned a ridiculously
long timezone name, which seems unlikely; and it wouldn't qualify
as a security problem even then, since pg_waldump (nee pg_xlogdump)
is a debug tool not part of the server. But gcc 8 has started issuing
warnings about it, so let's use snprintf and be safe.
Backpatch to 9.3 where this code was added.
Discussion: https://postgr.es/m/21789.1529170195@sss.pgh.pa.us
Recent additions to ParseFuncOrColumn to make it reject non-procedure
functions in CALL were neither adequate nor documented. Reorganize
the code to ensure uniform results for all the cases that should be
rejected. Also, use ERRCODE_WRONG_OBJECT_TYPE for this case as well
as the converse case of a procedure in a non-CALL context. The
original coding used ERRCODE_UNDEFINED_FUNCTION which seems wrong,
and is certainly inconsistent with the adjacent wrong-kind-of-routine
errors.
This reorganization also causes the checks for aggregate decoration with
a non-aggregate function to be made in the FUNCDETAIL_COERCION case;
that they were not is a long-standing oversight.
Discussion: https://postgr.es/m/14497.1529089235@sss.pgh.pa.us
Issues relate only to subtransactions that hold AccessExclusiveLocks
when replayed on standby.
Prior to PG10, aborting subtransactions that held an
AccessExclusiveLock failed to release the lock until top level commit or
abort. 49bff5300d fixed that.
However, 49bff5300d also introduced a similar bug where subtransaction
commit would fail to release an AccessExclusiveLock, leaving the lock to
be removed sometimes early and sometimes late. This commit fixes
that bug also. Backpatch to PG10 needed.
Tested by observation. Note need for multi-node isolationtester to improve
test coverage for this and other HS cases.
Reported-by: Simon Riggs
Author: Simon Riggs
Also this commit unifies some duplicated code in makeBufFile() and
BufFileOpenShared() into new function makeBufFileCommon().
Author: Antonin Houska
Reviewed-By: Thomas Munro, Tatsuo Ishii
Discussion: https://postgr.es/m/16139.1529049566%40localhost
They already fail anyway, but prior to this patch they raise an ugly
error message about a lock that cannot be acquired. This just improves
the message.
Author: Masahiko Sawada
Reported-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoBZau4g4_NUf3BKNd=CdYK+xaPdtJCzvOC1TxGdTiJx_Q@mail.gmail.com
Reviewed-by: Kuntal Ghosh, Alexander Korotkov, Simon Riggs, Michaël Paquier, Álvaro Herrera
GetRunningTransactionData() suggested that subxids were not worth
optimizing away if overflowed, yet they have already been removed
for that case.
Changes to LogAccessExclusiveLock() API forgot to remove the
prior comment when it was copied to LockAcquire().
32ac7a118f tried to fix a Hot Standby issue
reported by Greg Stark, but in doing so caused
a different bug to appear, noted by Andres Freund.
Revoke the core changes from 32ac7a118f,
leaving in its place a minor change in code
ordering and comments to explain for the future.
Fix inconsistent decisions about NOMATCH vs UNSUPPORTED result codes.
If we're going to cater for partkeys that have the same expression and
different collations, surely we should also support partkeys with the
same expression and different opclasses.
Clean up shaky handling of commuted opclauses, eg checking the wrong
operator to see what its negator is. This wouldn't cause any actual
bugs given a sane opclass definition, but it doesn't seem helpful to
expend more code to be less correct.
Improve handling of null elements in ScalarArrayOp arrays: in the
"op ALL" case, we can conclude they result in an unsatisfiable clause.
Minor cosmetic changes and comment improvements.
The previous coding saved pointers into the partitioned table's relcache
entry, but then closed the relcache entry, causing those pointers to
nominally become dangling. Actual trouble would be seen in the field
only if a relcache flush occurred mid-query, but that's hardly out of
the question.
While we could fix this by copying all the data in question at query
start, it seems better to just hold the relcache entry open for the
whole query.
While at it, improve the handling of support-function lookups: do that
once per query not once per pruning test. There's still something to be
desired here, in that we fail to exploit the possibility of caching data
across queries in the fn_extra fields of the relcache's FmgrInfo structs,
which could happen if we just used those structs in-place rather than
copying them. However, combining that with the possibility of per-query
lookups of cross-type comparison functions seems to require changes in the
APIs of a lot of the pruning support functions, so it's too invasive to
consider as part of this patch. A win would ensue only for complex
partition key data types (e.g. arrays), so it may not be worth the
trouble.
David Rowley and Tom Lane
Discussion: https://postgr.es/m/17850.1528755844@sss.pgh.pa.us
The .git directory might contain perl files, as hooks, for example.
Since we have no control over these they should be excluded from things
like our perlcritic checks.
Per offline report from Mike Blackwell.
When vacuum processes a relation it uses the corresponding relcache
entry's relfrozenxid / relminmxid as a cutoff for when to remove
tuples etc. Unfortunately for nailed relations (i.e. critical system
catalogs) bugs could frequently lead to the corresponding relcache
entry being stale.
This set of bugs could cause actual data corruption as vacuum would
potentially not remove the correct row versions, potentially reviving
them at a later point. After 699bf7d05c some corruptions in this vein
were prevented, but the additional error checks could also trigger
spuriously. Examples of such errors are:
ERROR: found xmin ... from before relfrozenxid ...
and
ERROR: found multixact ... from before relminmxid ...
To be caused by this bug the errors have to occur on system catalog
tables.
The two bugs are:
1) Invalidations for nailed relations were ignored, based on the
theory that the relcache entry for such tables doesn't
change. Which is largely true, except for fields like relfrozenxid
etc. This means that changes to relations vacuumed in other
sessions weren't picked up by already existing sessions. Luckily
autovacuum doesn't have particularly longrunning sessions.
2) For shared *and* nailed relations, the shared relcache init file
was never invalidated while running. That means that for such
tables (e.g. pg_authid, pg_database) it's not just already existing
sessions that are affected, but even new connections are as well.
That explains why the reports usually were about pg_authid et. al.
To fix 1), revalidate the rd_rel portion of a relcache entry when
invalid. This implies a bit of extra complexity to deal with
bootstrapping, but it's not too bad. The fix for 2) is simpler,
simply always remove both the shared and local init files.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion:
https://postgr.es/m/20180525203736.crkbg36muzxrjj5e@alap3.anarazel.dehttps://postgr.es/m/CAMa1XUhKSJd98JW4o9StWPrfS=11bPgG+_GDMxe25TvUY4Sugg@mail.gmail.comhttps://postgr.es/m/CAKMFJucqbuoDRfxPDX39WhA3vJyxweRg_zDVXzncr6+5wOguWA@mail.gmail.comhttps://postgr.es/m/CAGewt-ujGpMLQ09gXcUFMZaZsGJC98VXHEFbF-tpPB0fB13K+A@mail.gmail.com
Backpatch: 9.3-
It might be impossible for this to cause a problem in non-debug builds,
since there'd be no opportunity for the relcache entry to get recycled
before the fetch. It blows up nicely with -DRELCACHE_FORCE_RELEASE plus
valgrind, though.
Evidently introduced by careless refactoring in commit f0e44751d.
Back-patch accordingly.
Discussion: https://postgr.es/m/27543.1528758304@sss.pgh.pa.us
Calling an external function while a pin-lock is held is a bad idea as
those are designed to be short-lived. The stress of a first commit into
a large git history may contribute to that.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20180611164952.vmxdpdpirdtkdsz6@alap3.anarazel.de
We don't need two passes if we scan child partitions before parents,
as that way the children's present_parts are up to date before they're
needed. I (tgl) think there's actually a bug being fixed here, for the
case of an intermediate partitioned table with no direct leaf children,
but haven't attempted to construct a test case to prove it.
David Rowley
Discussion: https://postgr.es/m/CAKJS1f-6GODRNgEtdPxCnAPme2h2hTztB6LmtfdmcYAAOE0kQg@mail.gmail.com
Starting with commit f0e44751d7, ExecConstraints was in charge of
running the partition constraint; commit 19c47e7c82 modified that so
that caller could request to skip that checking depending on some
conditions, but that commit and 15ce775faa together introduced a small
bug there which caused ExecInsert to request skipping the constraint
check but have this not be honored -- in effect doing the check twice.
This could have been fixed in a very small patch, but on further
analysis of the involved function and its callsites, it turns out to be
simpler to give the responsibility of checking the partition constraint
fully to the caller, and return ExecConstraints to its original
(pre-partitioning) shape where it only checked tuple descriptor-related
constraints. Each caller must do partition constraint checking on its
own schedule, which is more convenient after commit 2f17844104 anyway.
Reported-by: David Rowley
Author: David Rowley, Álvaro Herrera
Reviewed-by: Amit Langote, Amit Khandekar, Simon Riggs
Discussion: https://postgr.es/m/CAKJS1f8w8+awsxgea8wt7_UX8qzOQ=Tm1LD+U1fHqBAkXxkW2w@mail.gmail.com
Also add a function that centralizes the logic for locating all our perl
files and use it in pgperlcritic and pgperltidy as well as the new
pgperlcheck.
The previous coding just ignored pruning constraints that compare a
partition key to a null-valued expression. This is silly, since really
what we can do there is conclude that all partitions are rejected: the
pruning operator is known strict so the comparison must always fail.
This also fixes the logic to not ignore constisnull for a Const comparison
value. That's probably an unreachable case, since the planner would
normally have simplified away a strict operator with a constant-null input.
But this code has no business assuming that.
David Rowley, per a gripe from me
Discussion: https://postgr.es/m/26279.1528670981@sss.pgh.pa.us
A review of the code has showed up a couple of issues fixed by this
commit:
- Physical slots have been using the confirmed LSN position as a start
comparison point which is always 0/0, instead use the restart LSN
position (logical slots need to use the confirmed LSN position, which
was correct).
- The actual slot update was incorrect for both physical and logical
slots. Physical slots need to use their restart_lsn as base comparison
point (confirmed_flush was used because of previous point), and logical
slots need to begin reading WAL from restart_lsn (confirmed_flush was
used as well), while confirmed_flush is compiled depending on the
decoding context and record read, and is the LSN position returned back
to the caller.
- Never return 0/0 if a slot cannot be advanced. This way, if a slot is
advanced while the activity is idle, then the same position is returned
to the caller over and over without raising an error. Instead return
the LSN the slot has been advanced to. With repetitive calls, the same
position is returned hence caller can directly monitor the difference in
progress in bytes by doing simply LSN difference calculations, which
should be monotonic.
Note that as the slot is owned by the backend advancing it, then the
read of those fields is fine lock-less, while updates need to happen
while the slot mutex is held, so fix that on the way as well. Other
locks for in-memory data of replication slots have been already fixed
previously.
Some of those issues have been pointed out by Petr and Simon during the
patch, while I noticed some of them after looking at the code. This
also visibly takes of a recently-discovered bug causing assertion
failures which can be triggered by a two-step slot forwarding which
first advanced the slot to a WAL page boundary and secondly advanced it
to the latest position, say 'FF/FFFFFFF' to make sure that the newest
LSN is used as forward point. It would have been nice to drop a test
for that, but the set of operators working on pg_lsn limits it, so this
is left for a future exercise.
Author: Michael Paquier
Reviewed-by: Petr Jelinek, Simon Riggs
Discussion: https://postgr.es/m/CANP8+jLyS=X-CAk59BJnsxKQfjwrmKicHQykyn52Qj-Q=9GLCw@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/2840048a-1184-417a-9da8-3299d207a1d7%40postgrespro.ru
These struct definitions were originally dropped into primnodes.h,
which is a poor choice since that's mainly intended for primitive
expression node types; these are not in that category. What they
are is auxiliary info in Plan trees, so move them to plannodes.h.
For consistency, also relocate some related code that was apparently
placed with the aid of a dartboard.
There's no interesting code changes in this commit, just reshuffling.
David Rowley and Tom Lane
Discussion: https://postgr.es/m/CAFj8pRBjrufA3ocDm8o4LPGNye9Y+pm1b9kCwode4X04CULG3g@mail.gmail.com
The initial coding of the run-time-pruning feature only coped with cases
where the partition key(s) are compared to Params. That is a bit silly;
we can allow it to work with any non-Var-containing stable expression, as
long as we take special care with expressions containing PARAM_EXEC Params.
The code is hardly any longer this way, and it's considerably clearer
(IMO at least). Per gripe from Pavel Stehule.
David Rowley, whacked around a bit by me
Discussion: https://postgr.es/m/CAFj8pRBjrufA3ocDm8o4LPGNye9Y+pm1b9kCwode4X04CULG3g@mail.gmail.com
While debugging issues on HEAD for the new slot forwarding feature of
Postgres 11, some monitoring of the code surrounding in-memory slot data
has proved that the lock handling may cause inconsistent data to be read
by read-only callers of slot functions, particularly
pg_get_replication_slots() which fetches data for the system view
pg_replication_slots, or modules looking directly at slot information.
The code paths involved in those problems concern logical decoding
initialization (down to 9.4) and WAL reservation for slots (new as of
10).
A set of comments documenting all the lock handlings, particularly the
dependency with LW locks for slots and the in_use flag as well as the
internal mutex lock is added, based on a suggested by Simon Riggs.
Some of the fixed code exists down to 9.4 where WAL decoding has been
introduced, but as those race conditions are really unlikely going to
happen as those concern code paths for slot and decoding creation, just
fix the problem on HEAD.
Author: Michael Paquier
Discussion: https://postgr.es/m/20180528085747.GA27845@paquier.xyz
Make sure that we don't exceed MaxAllocSize when increasing the number of
buckets. Perhaps later we'll remove that limit and use DSA_ALLOC_HUGE, but
for now just prevent further increases like the non-parallel code. This
change avoids the error from bug report #15225.
Author: Thomas Munro
Reviewed-By: Tom Lane
Reported-by: Frits Jalvingh
Discussion: https://postgr.es/m/152802081668.26724.16985037679312485972%40wrigleys.postgresql.org
Also, fix the pg_settings view to display source filename and line
number when invoked by a pg_read_all_settings member. This addition by
me (Álvaro).
Also, fix wording of the comment in GetConfigOption regarding the
restriction it implements, renaming the parameter for extra clarity.
Noted by Michaël.
These were all oversight in commit 25fff40798fc; backpatch to pg10,
where that commit first appeared.
Author: Laurenz Albe
Reviewed-by: Michaël Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/1519917758.6586.8.camel@cybertec.at
GetRunningTransactionData() should ignore VACUUM procs because in some
cases they are assigned xids. This could lead to holding back xmin via
the route of passing the xid to standby and then having that hold back
xmin on master via feedback.
Backpatch to 9.1 needed, but will only do so on supported versions.
Backpatch once proven on the buildfarm.
Reported-by: Greg Stark
Author: Simon Riggs
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CANP8+jJBYt=4PpTfiPb0UrH1_iPhzsxKH5Op_Wec634F0ohnAw@mail.gmail.com
This bug causes a lseek() failure to be reported as a "could not open"
failure in the error message, muddling bug reports. I introduced this
copy-and-pasteo in commit 78e1220104.
Noticed while reviewing code for bug report #15221, from lily liang. In
version 10 the affected function is only used by multixact.c and
commit_ts, and only in corner-case circumstances, neither of which are
involved in the reported bug (a pg_subtrans failure.)
Author: Álvaro Herrera
This patch does two things. First, it silences a number of compile-time
warnings in the msvc tools files, mainly those due to the fact that in
some cases we have more than one package per file. Second it supplies a
dummy Perl library with just enough of the Windows API referred to in
our code to let it run these checks cleanly, even on Unix machines where
the code is never supposed to run. The dummy library should only be used
for that purpose, as its README notes.
Any changes on page should be done in critical section, so move
_bt_upgrademetapage into critical section. Improve comment. Found by Amit
Kapila during post-commit review of 857f9c36.
Author: Amit Kapila
Use palloc0() instead of palloc() to create a new JsonbIterator.
Otherwise, the isScalar field is sometimes not initialized. There is
probably no impact in practice, but it's cleaner this way and it avoids
future problems.
Commit 3a7cc727c was a little over eager about adding an explicit return
to this function, whose value is checked in most call sites. This change
reverses that and returns the expected value explicitly. It also adds a
check to the one call site lacking one.
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
To distinguish SQL statements that are INSERT/UPDATE/DELETE from other
ones, exec_stmt_execsql looked at the post-rewrite form of the statement
rather than the original. This is problematic because it did that only
during first execution of the statement (in a session), but the correct
answer could change later due to addition or removal of DO INSTEAD rules
during the session. That could lead to an Assert failure, as reported
by Tushar Ahuja and Robert Haas. In non-assert builds, there's a hazard
that we would fail to enforce STRICT behavior when we'd be expected to.
That would happen if an initially present DO INSTEAD, that replaced the
original statement with one of a different type, were removed; after that
the statement should act "normally", including strictness enforcement, but
it didn't. (The converse case of enforcing strictness when we shouldn't
doesn't seem to be a hazard, as addition of a DO INSTEAD that changes the
statement type would always lead to acting as though the statement returned
zero rows, so that the strictness error could not fire.)
To fix, inspect the original form of the statement not the post-rewrite
form, making it valid to assume the answer can't change intra-session.
This should lead to the same answer in every case except when there is a
DO INSTEAD that changes the statement type; we will now set mod_stmt=true
anyway, while we would not have done so before. That breaks the Assert
in the SPI_OK_REWRITTEN code path, which expected the latter behavior.
It might be all right to assert mod_stmt rather than !mod_stmt there,
but I'm not entirely convinced that that'd always hold, so just remove
the assertion altogether.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/CA+TgmoZUrRN4xvZe_BbBn_Xp0BDwuMEue-0OyF0fJpfvU2Yc7Q@mail.gmail.com
Print columns as "column C of <relation>" rather than "<relation> column
C". This seems to read noticeably better in English, as evidenced by the
regression test output changes, and the code change also makes it possible
for translators to adjust the phrase order in other languages.
Also change the output for OCLASS_DEFAULT from "default for %s" to
"default value for %s". This seems to read better and is also more
consistent with the output of, for instance, getObjectTypeDescription().
Kyotaro Horiguchi, per a complaint from me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Refactor some cases in getObjectDescription so that the translator has
more control over phrase order in the translated messages. This doesn't
cause any changes in the English results. (I was sorely tempted to
reorder "... belonging to role %s in schema %s" into "... in schema %s
belonging to role %s", but refrained.)
In principle we could back-patch this, but since translators have not
complained about these cases previously, it seems better not to thrash
the translatable strings in back branches.
Kyotaro Horiguchi, tweaked a bit by me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
getObjectDescription and getObjectIdentity failed to schema-qualify
the name of the published table, which is bad in getObjectDescription and
unforgivable in getObjectIdentity. Actually, getObjectIdentity failed to
emit the table's name at all unless "objname" output is requested, which
accidentally works for some (all?) extant callers but is clearly not the
intended API. Somebody had also not gotten the memo that the output of
getObjectIdentity is not to be translated.
To fix getObjectDescription, I made it call getRelationDescription, which
required refactoring the translatable string for the case, but is more
future-proof in case we ever publish relations that aren't plain tables.
While at it, I made the English output look like "publication of table X
in publication Y"; the added "of" seems to me to make it read much better.
Back-patch to v10 where publications were introduced.
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Collations, conversions, extended statistics objects (in >= v10),
and all four types of text search objects have schema-qualified names.
getObjectDescription() ignored that and would emit just the base name of
the object, potentially producing wrong or at least highly misleading
output. Fix it to add the schema name whenever the object is not "visible"
in the current search path, as is the rule for other schema-qualifiable
object types.
Although in common situations the output won't change, this seems to me
(tgl) to be a bug worthy of back-patching, hence do so.
Kyotaro Horiguchi, per a complaint from me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Now that the Working with git wiki page no longer suggests producing
context diffs, we should preserve the information on how to use
git-external-diff for those people who want to view context format
diffs. The most obvious place is in the script itself, so that's what's
done here.
If echo = false, simple_prompt() is supposed to prevent echoing the
input (for password input). However, the Windows implementation applied
the mode change to STD_INPUT_HANDLE. That would not have the desired
effect if stdin isn't actually the terminal, for instance if the user
is piping something into psql. Fix it to apply the mode change to
the correct input file, so that passwords do not echo in such cases.
In passing, shorten and de-uglify this code by using #elif rather than
an #if nest and removing some duplicated code.
Back-patch to all supported versions. To simplify that, also back-patch
the portions of commit 9daec77e1 that got rid of an unnecessary
malloc/free in the same area.
Matthew Stickney (cosmetic changes by me)
Discussion: https://postgr.es/m/502a1fff-862b-da52-1031-f68df6ed5a2d@gmail.com
We used to claim to support platforms using 'q' or 'I64' as the printf
length modifier for long long int, by dint of replacing snprintf with
our own code which uses the C99 standard 'll' modifier. But that is
only adequate if we use INT64_MODIFIER only in snprintf-based calls,
not directly with the platform's native printf or fprintf. Which
hasn't been the case for years. We had not noticed, partially because
of inadequate test coverage, and partially because the buildfarm is
almost completely bare of machines that won't take 'll'. The last
one seems to have been frogmouth, which was adjusted recently so that
it will take 'll'. We might as well just give up on the pretense
that anything else works, and save ourselves some configure cycles.
Discussion: https://postgr.es/m/13103.1526749980@sss.pgh.pa.us
Discussion: https://postgr.es/m/24769.1526772680@sss.pgh.pa.us
Commit c37b3d08c dropped its added GetDataDirectoryCreatePerm call into
the wrong place in pg_resetwal.c, namely after the chdir to DataDir.
That broke invocations using a relative path, as reported by Tushar Ahuja.
We could have left it where it was and changed the argument to be ".",
but that'd result in a rather confusing error message in event of a
failure, so re-ordering seems like a better solution.
Similarly reorder operations in pg_rewind.c. The issue there is that
it doesn't seem like a good idea to do any actual operations before the
not-root check (on Unix) or the restricted token acquisition (on Windows).
I don't know that this is an actual bug, but I'm definitely not convinced
that it isn't, either.
Assorted other code review for c37b3d08c and da9b580d8: fix some
misspelled or otherwise badly worded comments, put the #include for
<sys/stat.h> where it actually belongs, etc.
Discussion: https://postgr.es/m/aeb9c3a7-3c3f-a57f-1a18-c8d4fcdc2a1f@enterprisedb.com
Commit 6e7baa3227 added support for "B" unit, for specifying config options
in bytes. However, it was only accepted in GUC_UNIT_BYTE settings,
wal_segment_size and track_activity_query_size, and not e.g. in work_mem.
This patch makes it consistent, so that "B" accepted in all the same
contexts where "kB", "MB", and so forth are accepted.
Add "B" to the list of accepted units in the error hint, along with "kB",
"MB", etc.
Add an entry in the conversion table for "TB" to "B" conversion. A terabyte
is out of range for any GUC_UNIT_BYTE option, so you always get an "out of
range" error with that, but without it, you get a confusing error message
that claims that "TB" is not an accepted unit, with a hint that nevertheless
lists "TB" as an accepted unit.
Reviewed-by: Alexander Korotkov, Andres Freund
Discussion: https://www.postgresql.org/message-id/1bfe7f4a-7e22-aa6e-7b37-f4d222ed2d67@iki.fi
Because the code for the HEADER option skips a line when this counter
is zero, a very long COPY FROM WITH HEADER operation would drop a line
every 2^32 lines. A lesser but still unfortunate problem is that errors
would show a wrong input line number for errors occurring beyond the
2^31'st input line. While such large input streams seemed impractical
when this code was first written, they're not any more. Widening the
counter (and some associated variables) to uint64 should be enough to
prevent problems for the foreseeable future.
David Rowley
Discussion: https://postgr.es/m/CAKJS1f88yh-6wwEfO6QLEEvH3BEugOq2QX1TOja0vCauoynmOQ@mail.gmail.com
OFFSET <x> ROWS FETCH FIRST <y> ROWS ONLY syntax is supposed to accept
<simple value specification>, which includes parameters as well as
literals. When this syntax was added all those years ago, it was done
inconsistently, with <x> and <y> being different subsets of the
standard syntax.
Rectify that by making <x> and <y> accept the same thing, and allowing
either a (signed) numeric literal or a c_expr there, which allows for
parameters, variables, and parenthesized arbitrary expressions.
Per bug #15200 from Lukas Eder.
Backpatch all the way, since this has been broken from the start.
Discussion: https://postgr.es/m/877enz476l.fsf@news-spur.riddles.org.uk
Discussion: http://postgr.es/m/152647780335.27204.16895288237122418685@wrigleys.postgresql.org
This is the converse of the unsafe-usage-of-%m problem: the reason
ereport/elog provide that format code is mainly to dodge the hazard
of errno getting changed before control reaches functions within the
arguments of the macro. I only found one instance of this hazard,
but it's been there since 9.4 :-(.
While glibc's version of printf accepts %m, most others do not;
to be portable, we have to do it the hard way with strerror(errno).
pg_verify_checksums evidently did not get that memo.
Noted while fooling around with NetBSD-current, which generates
a compiler warning for this mistake.
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
FindDefinedSymbol was intended to take an array of possible include
paths, but it never actually worked correctly for any but the first
array element. Since there's no use-case for more than one path
anyway, let's just simplify this code and its callers by redefining
it as taking only one include path.
Minor other code-beautification without functional effects, except
that in one place we format the output as pgindent would do.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGXM_n32hTTkircW4_K1LQFsJNb6xjs0pAP4QC0ZpyJfPQ@mail.gmail.com
Ancient HPUX, for one, does this. We hadn't noticed due to the lack
of regression tests that required a working strtoll.
(I was slightly tempted to remove the other historical spelling,
strto[u]q, since it seems we have no buildfarm members testing that case.
But I refrained.)
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
Buildfarm member dromedary is still unhappy about the recently-added
ecpg "long long" tests. The reason turns out to be that it includes
"-ansi" in its CFLAGS, and in their infinite wisdom Apple have decided
to hide the declarations of strtoll/strtoull in C89-compliant builds.
(I find it pretty curious that they hide those function declarations
when you can nonetheless declare a "long long" variable, but anyway
that is their behavior, both on dromedary's obsolete macOS version and
the newest and shiniest.) As a result, gcc assumes these functions
return "int", leading naturally to wrong results.
(Looking at dromedary's past build results, it's evident that this
problem also breaks pg_strtouint64() on 32-bit platforms; but we
evidently have no regression tests that exercise that function with
values above 32 bits.)
To fix, supply declarations for these functions when the platform
provides the functions but not the declarations, using the same type
of mechanism as we use for some other similar cases.
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
This will only actually exercise the "long long" code paths on platforms
where "long" is 32 bits --- otherwise, the SQL bigint type maps to
plain "long", and we will test that code path instead. But that's
probably sufficient coverage, and anyway we weren't testing either
code path before.
Dang Minh Huong, tweaked a bit by me
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
This is needed for full support of "long long" variables in ecpg, but
the previous patch for bug #15080 (commits 51057feaa et al) missed it.
In MSVC versions where the functions don't exist under those names,
we can nonetheless use _strtoi64() and _strtoui64().
Like the previous patch, back-patch all the way.
Dang Minh Huong
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
Use DISCARD PLANS instead of a reconnect to force reconstruction of
a cached plan; this corresponds more nearly to what people might
actually do in practice.
Commit bad51a49a tried to use a shortcut with just one stamp file
recording the actions of generating the pg_*_d.h headers and copying
them to the src/include/catalog/ directory. That doesn't work in all
scenarios though, so we must use two stamp files like the Makefiles do.
John Naylor
Discussion: https://postgr.es/m/CANFyU944GdHr=puPbA78STnqr=8kgMrGF-VDHck6aO_-qNDALg@mail.gmail.com
In commit 6bdf1303b, we ensured that power()/^ for float8 would honor
the NaN behaviors specified by POSIX standards released in this century,
ie NaN ^ 0 = 1 and 1 ^ NaN = 1. However, numeric_power() was not
touched and continued to follow the once-common behavior that every
case involving NaN input produces NaN. For consistency, let's switch
the numeric behavior to the modern spec in the same release that ensures
that behavior for float8.
(Note that while 6bdf1303b was initially back-patched, we later undid
that, concluding that any behavioral change should appear only in v11.)
Discussion: https://postgr.es/m/10898.1526421338@sss.pgh.pa.us
Up to now, it's been safe for plpgsql to store TOAST pointers in its
variables because the ActiveSnapshot for whatever query called the plpgsql
function will surely protect such TOAST values from being vacuumed away,
even if the owning table rows are committed dead. With the introduction of
procedures, that assumption is no longer good in "non atomic" executions
of plpgsql code. We adopt the slightly brute-force solution of detoasting
all TOAST pointers at the time they are stored into variables, if we're in
a non-atomic context, just in case the owning row goes away.
Some care is needed to avoid long-term memory leaks, since plpgsql tends
to run with CurrentMemoryContext pointing to its call-lifespan context,
but we shouldn't assume that no memory is leaked by heap_tuple_fetch_attr.
In plpgsql proper, we can do the detoasting work in the "eval_mcontext".
Most of the code thrashing here is due to the need to add this capability
to expandedrecord.c as well as plpgsql proper. In expandedrecord.c,
we can't assume that the caller's context is short-lived, so make use of
the short-term sub-context that was already invented for checking domain
constraints. In view of this repurposing, it seems good to rename that
variable and associated code from "domain_check_cxt" to "short_term_cxt".
Peter Eisentraut and Tom Lane
Discussion: https://postgr.es/m/5AC06865.9050005@anastigmatix.net
canonicalize_ec_expression() is supposed to agree with coerce_type() as to
whether a RelabelType should be inserted to make a subexpression be valid
input for the operators of a given opclass. However, it did the wrong
thing with named-composite-type inputs to record_eq(): it put in a
RelabelType to RECORDOID, which the parser doesn't. In some cases this was
harmless because all code paths involving a particular equivalence class
did the same thing, but in other cases this would result in failing to
recognize a composite-type expression as being a member of an equivalence
class that it actually is a member of. The most obvious bad effect was to
fail to recognize that an index on a composite column could provide the
sort order needed for a mergejoin on that column, as reported by Teodor
Sigaev. I think there might be other, subtler, cases that result in
misoptimization. It also seems possible that an unwanted RelabelType
would sometimes get into an emitted plan --- but because record_eq and
friends don't examine the declared type of their input expressions, that
would not create any visible problems.
To fix, just treat RECORDOID as if it were a polymorphic type, which in
some sense it is. We might want to consider formalizing that a bit more
someday, but for the moment this seems to be the only place where an
IsPolymorphicType() test ought to include RECORDOID as well.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/a6b22369-e3bf-4d49-f59d-0c41d3551e81@sigaev.ru
Previously, we passed the toplevel PlannerInfo, but we actually want
to pass the relevant subroot. One problem with passing the toplevel
PlannerInfo is that the FDW which wants to push down an UPDATE or
DELETE against a join won't find the relevant joinrel there.
As of commit 1bc0100d27, postgres_fdw
tries to do exactly this and can be made to fail an assertion as a
result.
It's possible that this should be regarded as a bug fix and
back-patched to earlier releases, but for lack of a test case that
fails in earlier releases, no back-patch for now.
Etsuro Fujita, reviewed by Amit Langote.
Discussion: http://postgr.es/m/5AF43E02.30000@lab.ntt.co.jp
The impact of VARIADIC on the combine/serialize/deserialize support
functions of an aggregate wasn't thought through carefully. There is
actually no impact, because variadicity isn't passed through to these
functions (and it doesn't seem like it would need to be). However,
lookup_agg_function was mistakenly told to check things as though it were
passed through. The net result was that it was impossible to declare an
aggregate that had both VARIADIC input and parallelism support functions.
In passing, fix a runtime check in nodeAgg.c for the combine function's
strictness to make its error message agree with the creation-time check.
The previous message was actually backwards, and it doesn't seem like
there's a good reason to have two versions of this message text anyway.
Back-patch to 9.6 where parallel aggregation was introduced.
Alexey Bashtanov; message fix by me
Discussion: https://postgr.es/m/f86dde87-fef4-71eb-0480-62754aaca01b@imap.cc
Creating indexes on foreign tables is already forbidden, but local
partitioned indexes (commit 8b08f7d482) forgot to check for them. Add
a preliminary check to prevent wasting time.
Another school of thought says to allow the index to be created if it's
not a unique index; but it's possible to do better in the future (enable
indexing of foreign tables, somehow), so we avoid painting ourselves in
a corner by rejecting all cases, to avoid future grief (a.k.a. backward
incompatible changes).
Reported-by: Arseny Sher
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/87sh71cakz.fsf@ars-thinkpad
