Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e0. The other corrections
are more self-evident.
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
For pg_attribute, this allows to insert at once a full set of attributes
for a relation (roughly 15% of WAL reduction in extreme cases). For
pg_shdepend, this reduces the work done when creating new shared
dependencies from a database template. The number of slots used for the
insertion is capped at 64kB of data inserted for both, depending on the
number of items to insert and the length of the rows involved.
More can be done for other catalogs, like pg_depend. This part requires
a different approach as the number of slots to use depends also on the
number of entries discarded as pinned dependencies. This is also
related to the rework or dependency handling for ALTER TABLE and CREATE
TABLE, mainly.
Author: Daniel Gustafsson
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20190213182737.mxn6hkdxwrzgxk35@alap3.anarazel.de
Previously we would allocate blocks to parallel workers during a parallel
sequential scan 1 block at a time. Since other workers were likely to
request a block before a worker returns for another block number to work
on, this could lead to non-sequential I/O patterns in each worker which
could cause the operating system's readahead to perform poorly or not at
all.
Here we change things so that we allocate consecutive "chunks" of blocks
to workers and have them work on those until they're done, at which time
we allocate another chunk for the worker. The size of these chunks is
based on the size of the relation.
Initial patch here was by Thomas Munro which showed some good improvements
just having a fixed chunk size of 64 blocks with a simple ramp-down near
the end of the scan. The revisions of the patch to make the chunk size
based on the relation size and the adjusted ramp-down in powers of two was
done by me, along with quite extensive benchmarking to determine the
optimal chunk sizes.
For the most part, benchmarks have shown significant performance
improvements for large parallel sequential scans on Linux, FreeBSD and
Windows using SSDs. It's less clear how this affects the performance of
cloud providers. Tests done so far are unable to obtain stable enough
performance to provide meaningful benchmark results. It is possible that
this could cause some performance regressions on more obscure filesystems,
so we may need to later provide users with some ability to get something
closer to the old behavior. For now, let's leave that until we see that
it's really required.
Author: Thomas Munro, David Rowley
Reviewed-by: Ranier Vilela, Soumyadeep Chakraborty, Robert Haas
Reviewed-by: Amit Kapila, Kirk Jamison
Discussion: https://postgr.es/m/CA+hUKGJ_EErDv41YycXcbMbCBkztA34+z1ts9VQH+ACRuvpxig@mail.gmail.com
Incorrect function names were referenced. As this fixes some portions
of tableam.h, that is mentioned in the docs as something to look at when
implementing a table AM, backpatch down to 12 where this has been
introduced.
Author: Hironobu Suzuki
Discussion: https://postgr.es/m/8fe6d672-28dd-3f1d-7aed-ac2f6d599d3f@interdb.jp
Backpatch-through: 12
Rewrite the documentation of these functions, in light of recent bug fix
commit 5940ffb2.
Back-patch to 13 where the check-for-conflict-out code was split up into
AM-specific and generic parts, and new documentation was added that now
looked wrong.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
There's a very low risk that RecentGlobalXmin could be far enough in
the past to be older than relfrozenxid, or even wrapped
around. Luckily the consequences of that having happened wouldn't be
too bad - the page wouldn't be pruned for a while.
Avoid that risk by using TransactionXmin instead. As that's announced
via MyPgXact->xmin, it is protected against wrapping around (see code
comments for details around relfrozenxid).
Author: Andres Freund
Discussion: https://postgr.es/m/20200328213023.s4eyijhdosuc4vcj@alap3.anarazel.de
Backpatch: 9.5-
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Introduce a GUC and a tablespace option to control I/O prefetching, much
like effective_io_concurrency, but for work that is done on behalf of
many client sessions.
Use the new setting in heapam.c instead of the hard-coded formula
effective_io_concurrency + 10 introduced by commit 558a9165e0. Go with
a default value of 10 for now, because it's a round number pretty close
to the value used for that existing case.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
Multi-insert for heap is not yet used actively for catalogs, but the
code to support this case is in place for logical decoding. The
existing code forgot to issue a XLOG_HEAP2_NEW_CID record for the first
tuple inserted, leading to failures when attempting to use multiple
inserts for catalogs at decoding time. This commit fixes the problem by
WAL-logging the needed CID.
This is not an active bug, so no back-patch is done.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/E0D4CC67-A1CF-4DF4-991D-B3AC2EB5FAE9@yesql.se
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
The old names for the attribute-detoasting functions names included
the word "heap," which seems outdated now that the heap is only one of
potentially many table access methods.
On the other hand, toast_insert_or_update and toast_delete are
heap-specific, so rename them by adding "heap_" as a prefix.
Not all of the work of making the TOAST system fully accessible to AMs
other than the heap is done yet, but there seems to be little harm in
getting this renaming out of the way now. Commit
8b94dab066 already divided up the
functions among various files partially according to whether it was
intended that they should be heap-specific or AM-agnostic, so this is
just clarifying the division contemplated by that commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
In what seems like a fit of misplaced optimization,
ExtractReplicaIdentity() accessed the relation's replica-identity
index without taking any lock on it. Usually, the surrounding query
already holds some lock so this is safe enough ... but in the case
of a previously-planned delete, there might be no existing lock.
Given a suitable test case, this is exposed in v12 and HEAD by an
assertion added by commit b04aeb0a0.
The whole thing's rather poorly thought out anyway; rather than
looking directly at the index, we should use the index-attributes
bitmap that's held by the parent table's relcache entry, as the
caller functions do. This is more consistent and likely a bit
faster, since it avoids a cache lookup. Hence, change to doing it
that way.
While at it, rather than blithely assuming that the identity
columns are non-null (with catastrophic results if that's wrong),
add assertion checks that they aren't null. Possibly those should
be actual test-and-elog, but I'll leave it like this for now.
In principle, this is a bug that's been there since this code was
introduced (in 9.4). In practice, the risk seems quite low, since
we do have a lock on the index's parent table, so concurrent
changes to the index's catalog entries seem unlikely. Given the
precedent that commit 9c703c169 wasn't back-patched, I won't risk
back-patching this further than v12.
Per report from Hadi Moshayedi.
Discussion: https://postgr.es/m/CAK=1=Wrek44Ese1V7LjKiQS-Nd-5LgLi_5_CskGbpggKEf3tKQ@mail.gmail.com
In serializable mode, heap_hot_search_buffer() incorrectly acquired a
predicate lock on the root tuple, not the returned tuple that satisfied
the visibility checks. As explained in README-SSI, the predicate lock does
not need to be copied or extended to other tuple versions, but for that to
work, the correct, visible, tuple version must be locked in the first
place.
The original SSI commit had this bug in it, but it was fixed back in 2013,
in commit 81fbbfe335. But unfortunately, it was reintroduced a few months
later in commit b89e151054. Wising up from that, add a regression test
to cover this, so that it doesn't get reintroduced again. Also, move the
code that sets 't_self', so that it happens at the same time that the
other HeapTuple fields are set, to make it more clear that all the code in
the loop operate on the "current" tuple in the chain, not the root tuple.
Bug spotted by Andres Freund, analysis and original fix by Thomas Munro,
test case and some additional changes to the fix by Heikki Linnakangas.
Backpatch to all supported versions (9.4).
Discussion: https://www.postgresql.org/message-id/20190731210630.nqhszuktygwftjty%40alap3.anarazel.de
This puts back reverted commit de87a084c0, with some bug fixes.
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for T1
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for T1
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once T1 releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after T1 finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
Discussion: https://postgr.es/m/2815.1560521451@sss.pgh.pa.us
This reverts commits 3da73d6839 and de87a084c0.
This code has some tricky corner cases that I'm not sure are correct and
not properly tested anyway, so I'm reverting the whole thing for next
week's releases (reintroducing the deadlock bug that we set to fix).
I'll try again afterwards.
Discussion: https://postgr.es/m/E1hbXKQ-0003g1-0C@gemulon.postgresql.org
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for X
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for X
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once X releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after X finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
Some of the wrapper functions didn't match the callback names. Many of
them due to staying "consistent" with historic naming of the wrapped
functionality. We decided that for most cases it's more important to
be for tableam to be consistent going forward, than with the past.
The one exception is beginscan/endscan/... because it'd have looked
odd to have systable_beginscan/endscan/... with a different naming
scheme, and changing the systable_* APIs would have caused way too
much churn (including breaking a lot of external users).
Author: Ashwin Agrawal, with some small additions by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CALfoeiugyrXZfX7n0ORCa4L-m834dzmaE8eFdbNR6PMpetU4Ww@mail.gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Before this commit, when ANALYZE was run on a table and serializable
was used (either by virtue of an explicit BEGIN TRANSACTION ISOLATION
LEVEL SERIALIZABLE, or default_transaction_isolation being set to
serializable) a null pointer dereference lead to a crash.
The analyze scan doesn't need a snapshot (nor predicate locking), but
before this commit a scan only contained information about being a
bitmap or sample scan.
Refactor the option passing to the scan_begin callback to use a
bitmask instead. Alternatively we could have added a new boolean
parameter, but that seems harder to read. Even before this issue
various people (Heikki, Tom, Robert) suggested doing so.
These changes don't change the scan APIs outside of tableam. The flags
argument could be exposed, it's not necessary to fix this
problem. Also the wrapper table_beginscan* functions encapsulate most
of that complexity.
After these changes fixing the bug is trivial, just don't acquire
predicate lock for analyze style scans. That was already done for
bitmap heap scans. Add an assert that a snapshot is passed when
acquiring the predicate lock, so this kind of bug doesn't require
running with serializable.
Also add a comment about sample scans currently requiring predicate
locking the entire relation, that previously wasn't remarked upon.
Reported-By: Joe Wildish
Author: Andres Freund
Discussion:
https://postgr.es/m/4EA80A20-E9BF-49F1-9F01-5B66CAB21453@elusive.cxhttps://postgr.es/m/20190411164947.nkii4gaeilt4bui7@alap3.anarazel.dehttps://postgr.es/m/20190518203102.g7peu2fianukjuxm@alap3.anarazel.de
Instead add a tableam callback to do so. To avoid adding per
validation overhead, pass a scan to tuple_tid_valid. In heap's case
we'd otherwise incurred a RelationGetNumberOfBlocks() call for each
tid - which'd have added noticable overhead to nodeTidscan.c.
Author: Andres Freund
Reviewed-By: Ashwin Agrawal
Discussion: https://postgr.es/m/20190515185447.gno2jtqxyktylyvs@alap3.anarazel.de
The conditions listed in this comment have changed several times, and at
some point the thing that the "if so" referred to was negated.
The text was OK up to 9.6. It was differently wrong in v10, v11 and
master, so fix in all those versions.
The term "item pointer" should not be used to refer to ItemIdData
variables, since that is needlessly ambiguous. Only
ItemPointerData/ItemPointer variables should be called item pointers.
To fix, establish the convention that ItemIdData variables should always
be referred to either as "item identifiers" or "line pointers". The
term "item identifier" already predominates in docs and translatable
messages, and so should be the preferred alternative there.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
Commit d2599ecfcc introduced some contorted, confused code around:
readers would think that it's possible for HeapTupleHeaderGetXmin return
a non-frozen value for some frozen tuples, which would be disastrous.
There's no actual bug, but it seems better to make it clearer.
Per gripe from Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/30116.1555430496@sss.pgh.pa.us
This adds table_multi_insert(), and converts COPY FROM, the only user
of heap_multi_insert, to it.
A simple conversion of COPY FROM use slots would have yielded a
slowdown when inserting into a partitioned table for some
workloads. Different partitions might need different slots (both slot
types and their descriptors), and dropping / creating slots when
there's constant partition changes is measurable.
Thus instead revamp the COPY FROM buffering for partitioned tables to
allow to buffer inserts into multiple tables, flushing only when
limits are reached across all partition buffers. By only dropping
slots when there've been inserts into too many different partitions,
the aforementioned overhead is gone. By allowing larger batches, even
when there are frequent partition changes, we actuall speed such cases
up significantly.
By using slots COPY of very narrow rows into unlogged / temporary
might slow down very slightly (due to the indirect function calls).
Author: David Rowley, Andres Freund, Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190327054923.t3epfuewxfqdt22e@alap3.anarazel.de
Andres Freund
Noah Misch
Amit Kapila
Michael Paquier
Thomas Munro
David Rowley
Peter Geoghegan
Tom Lane
Peter Eisentraut
Alvaro Herrera
Bruce Momjian
Robert Haas
Heikki Linnakangas