Gen_fmgrtab.pl treated aggregate functions the same as other built-in
functions, which is wasteful because there is no real need to have
entries for them in the fmgr_builtins[] table. Suppressing those
entries saves about 3KB in the compiled table on my machine; which
is not a lot but it's not nothing either, considering that that
table is pretty "hot". The only outside code change needed is
that ExecInitWindowAgg() can't be allowed to call fmgr_info_cxt()
on a plain aggregate function. But that saves a few cycles anyway.
Having done that, the aggregate_dummy() function is unreferenced
and might as well be dropped. Using "aggregate_dummy" as the prosrc
value for an aggregate is now just a documentation convention not
something that matters. There was some discussion of using NULL
instead to save a few bytes in pg_proc, but we'd have to remove
prosrc's BKI_FORCE_NOT_NULL marking which doesn't seem a great idea.
Anyway, it's possible there's client-side code that expects to
see "aggregate_dummy" there, so I'm loath to change it without a
strong reason.
Discussion: https://postgr.es/m/533989.1604263665@sss.pgh.pa.us
If the planner erroneously puts a non-parallel-safe SubPlan into
a parallelized portion of the query tree, nodeSubplan.c will fail
in the worker processes because it finds a null in es_subplanstates,
which it's unable to cope with. It seems worth a test-and-elog to
make that an error case rather than a core dump case.
This probably should have been included in commit 16ebab688, which
was responsible for allowing nulls to appear in es_subplanstates
to begin with. So, back-patch to v10 where that came in.
Discussion: https://postgr.es/m/924226.1604422326@sss.pgh.pa.us
Previously, ExecInitModifyTable relied on ExecInitJunkFilter,
and thence ExecCleanTypeFromTL, to build the target descriptor from
the query tlist. While we just checked (in ExecCheckPlanOutput)
that the tlist produces compatible output, this is not a great
substitute for the relation's actual tuple descriptor that's
available from the relcache. For one thing, dropped columns will
not be correctly marked attisdropped; it's a bit surprising that
we've gotten away with that this long. But the real reason for
being concerned with this is that using the table's descriptor means
that the slot will have correct attrmissing data, allowing us to
revert the klugy fix of commit ba9f18abd. (This commit undoes
that one's changes in trigger.c, but keeps the new test case.)
Thus we can solve the bogus-trigger-tuple problem with fewer cycles
rather than more.
No back-patch, since this doesn't fix any additional bug, and it
seems somewhat more likely to have unforeseen side effects than
ba9f18abd's narrow fix.
Discussion: https://postgr.es/m/16644-5da7ef98a7ac4545@postgresql.org
Since commit 913bbd88d, check_sql_fn_retval() can either insert type
coercion steps in-line in the Query that produces the SQL function's
results, or generate a new top-level Query to perform the coercions,
if modifying the Query's output in-place wouldn't be safe. However,
it appears that the latter case has never actually worked, because
the code tried to inject the new Query back into the query list it was
passed ... which is not the list that will be used for later processing
when we execute the SQL function "normally" (without inlining it).
So we ended up with no coercion happening at run-time, leading to
wrong results or crashes depending on the datatypes involved.
While the regression tests look like they cover this area well enough,
through a huge bit of bad luck all the test cases that exercise the
separate-Query path were checking either inline-able cases (which
accidentally didn't have the bug) or cases that are no-ops at runtime
(e.g., varchar to text), so that the failure to perform the coercion
wasn't obvious. The fact that the cases that don't work weren't
allowed at all before v13 probably contributed to not noticing the
problem sooner, too.
To fix, get rid of the separate "flat" list of Query nodes and instead
pass the real two-level list that is going to be used later. I chose
to make the same change in check_sql_fn_statements(), although that has
no actual bug, just so that we don't need that data structure at all.
This is an API change, as evidenced by the adjustments needed to
callers outside functions.c. That's a bit scary to be doing in a
released branch, but so far as I can tell from a quick search,
there are no outside callers of these functions (and they are
sufficiently specific to our semantics for SQL-language functions that
it's not apparent why any extension would need to call them). In any
case, v13 already changed the API of check_sql_fn_retval() compared to
prior branches.
Per report from pinker. Back-patch to v13 where this code came in.
Discussion: https://postgr.es/m/1603050466566-0.post@n3.nabble.com
Store the tuple conversion map to convert a tuple from a child table's
format to the root format in a new ri_ChildToRootMap field in
ResultRelInfo. It is initialized if transition tuple capture for FOR
STATEMENT triggers or INSERT tuple routing on a partitioned table is
needed. Previously, ModifyTable kept the maps in the per-subplan
ModifyTableState->mt_per_subplan_tupconv_maps array, or when tuple
routing was used, in
ResultRelInfo->ri_Partitioninfo->pi_PartitionToRootMap. The new field
replaces both of those.
Now that the child-to-root tuple conversion map is always available in
ResultRelInfo (when needed), remove the TransitionCaptureState.tcs_map
field. The callers of Exec*Trigger() functions no longer need to set or
save it, which is much less confusing and bug-prone. Also, as a future
optimization, this will allow us to delay creating the map for a given
result relation until the relation is actually processed during
execution.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqHtCWLdK-LO%3DNEsvOdHx%2B7yv4mE_zYK0i3BH7dXb-wxog%40mail.gmail.com
When executing DDL on a partitioned table or on a table with inheritance
children, statement-level triggers must be fired against the table given
in the original statement. The code to look that up was a bit messy and
duplicative. Commit 501ed02cf6 added a helper function,
getASTriggerResultRelInfo() (later renamed to getTargetResultRelInfo())
for it, but for some reason it was only used when firing AFTER STATEMENT
triggers and the code to fire BEFORE STATEMENT triggers duplicated the
logic.
Determine the target relation in ExecInitModifyTable(), and set it always
in ModifyTableState. Code that used to call getTargetResultRelInfo() can
now use ModifyTableState->rootResultRelInfo directly.
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqFViT47Zbr_ASBejiK7iDG8%3DQ1swQ-tjM6caRPQ67pT%3Dw%40mail.gmail.com
Maintaining 'es_result_relation_info' correctly at all times has become
cumbersome, especially with partitioning where each partition gets its
own result relation info. Having to set and reset it across arbitrary
operations has caused bugs in the past.
This changes all the places that used 'es_result_relation_info', to
receive the currently active ResultRelInfo via function parameters
instead.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
FDWs that can perform an UPDATE/DELETE remotely using the "direct modify"
set of APIs need to access the ResultRelInfo of the target table. That's
currently available in EState.es_result_relation_info, but the next
commit will remove that field.
This commit adds a new resultRelation field in ForeignScan, to store the
target relation's RT index, and the corresponding ResultRelInfo in
ForeignScanState. The FDW's PlanDirectModify callback is expected to set
'resultRelation' along with 'operation'. The core code doesn't need them
for anything, they are for the convenience of FDW's Begin- and
IterateDirectModify callbacks.
Authors: Amit Langote, Etsuro Fujita
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
Instead of allocating all the ResultRelInfos upfront in one big array,
allocate them in ExecInitModifyTable(). es_result_relations is now an
array of ResultRelInfo pointers, rather than an array of structs, and it
is indexed by the RT index.
This simplifies things: we get rid of the separate concept of a "result
rel index", and don't need to set it in setrefs.c anymore. This also
allows follow-up optimizations (not included in this commit yet) to skip
initializing ResultRelInfos for target relations that were not needed at
runtime, and removal of the es_result_relation_info pointer.
The EState arrays of regular result rels and root result rels are merged
into one array. Similarly, the resultRelations and rootResultRelations
lists in PlannedStmt are merged into one. It's not actually clear to me
why they were kept separate in the first place, but now that the
es_result_relations array is indexed by RT index, it certainly seems
pointless.
The PlannedStmt->resultRelations list is now only needed for
ExecRelationIsTargetRelation(). One visible effect of this change is that
ExecRelationIsTargetRelation() will now return 'true' also for the
partition root, if a partitioned table is updated. That seems like a good
thing, although the function isn't used in core code, and I don't see any
reason for an FDW to call it on a partition root.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
Unlike for functions, OUT parameters for procedures are part of the
signature. Therefore, they have to be listed in pg_proc.proargtypes
as well as mentioned in ALTER PROCEDURE and DROP PROCEDURE.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/2b8490fe-51af-e671-c504-47359dc453c5@2ndquadrant.com
When commit bd3daddaf introduced AlternativeSubPlans, I had some
ambitions towards allowing the choice of subplan to change during
execution. That has not happened, or even been thought about, in the
ensuing twelve years; so it seems like a failed experiment. So let's
rip that out and resolve the choice of subplan at the end of planning
(in setrefs.c) rather than during executor startup. This has a number
of positive benefits:
* Removal of a few hundred lines of executor code, since
AlternativeSubPlans need no longer be supported there.
* Removal of executor-startup overhead (particularly, initialization
of subplans that won't be used).
* Removal of incidental costs of having a larger plan tree, such as
tree-scanning and copying costs in the plancache; not to mention
setrefs.c's own costs of processing the discarded subplans.
* EXPLAIN no longer has to print a weird (and undocumented)
representation of an AlternativeSubPlan choice; it sees only the
subplan actually used. This should mean less confusion for users.
* Since setrefs.c knows which subexpression of a plan node it's
working on at any instant, it's possible to adjust the estimated
number of executions of the subplan based on that. For example,
we should usually estimate more executions of a qual expression
than a targetlist expression. The implementation used here is
pretty simplistic, because we don't want to expend a lot of cycles
on the issue; but it's better than ignoring the point entirely,
as the executor had to.
That last point might possibly result in shifting the choice
between hashed and non-hashed EXISTS subplans in a few cases,
but in general this patch isn't meant to change planner choices.
Since we're doing the resolution so late, it's really impossible
to change any plan choices outside the AlternativeSubPlan itself.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/1992952.1592785225@sss.pgh.pa.us
Since there is only one place that actually needs the partition check
expression, namely ExecPartitionCheck, it's better to fetch it from
the relcache there. In this way we will never fetch it at all if
the query never has use for it, and we still fetch it just once when
we do need it.
The reason for taking an interest in this is that if the relcache
doesn't already have the check expression cached, fetching it
requires obtaining AccessShareLock on the partition root. That
means that operations that look like they should only touch the
partition itself will also take a lock on the root. In particular
we observed that TRUNCATE on a partition may take a lock on the
partition's root, contributing to a deadlock situation in parallel
pg_restore.
As written, this patch does have a small cost, which is that we
are microscopically reducing efficiency for the case where a partition
has an empty check expression. ExecPartitionCheck will be called,
and will go through the motions of setting up and checking an empty
qual, where before it would not have been called at all. We could
avoid that by adding a separate boolean flag to track whether there
is a partition expression to test. However, this case only arises
for a default partition with no siblings, which surely is not an
interesting case in practice. Hence adding complexity for it
does not seem like a good trade-off.
Amit Langote, per a suggestion by me
Discussion: https://postgr.es/m/VI1PR03MB31670CA1BD9625C3A8C5DD05EB230@VI1PR03MB3167.eurprd03.prod.outlook.com
Previously, it was based on nBlocksAllocated to account for tapes with
open write buffers that may not have made it to the BufFile yet.
That was unnecessary, because callers do not need to get the number of
blocks while a tape has an open write buffer; and it also conflicted
with the preallocation logic added for HashAgg.
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/ce5af05900fdbd0e9185747825a7423c48501964.camel@j-davis.com
Backpatch-through: 13
Partitioning tuple route code assumes that the partition chosen while
descending the partition hierarchy is always the correct one. This is
true except when the partition is the default partition and another
partition has been added concurrently: the partition constraint changes
and we don't recheck it. This can lead to tuples mistakenly being added
to the default partition that should have been rejected.
Fix by rechecking the default partition constraint while descending the
hierarchy.
An isolation test based on the reproduction steps described by Hao Wu
(with tweaks for extra coverage) is included.
Backpatch to 12, where this bug came in with 898e5e3290.
Reported by: Hao Wu <hawu@vmware.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqFqBmcSSap4sFnCBUEL_VfOMmEKaQ3gwUhyfa4c7J_-nA@mail.gmail.com
Discussion: https://postgr.es/m/DM5PR0501MB3910E97A9EDFB4C775CF3D75A42F0@DM5PR0501MB3910.namprd05.prod.outlook.com
nodeSubplan.c expects that the testexpr for a hashable ANY SubPlan
has the form of one or more OpExprs whose LHS is an expression of the
outer query's, while the RHS is an expression over Params representing
output columns of the subquery. However, the planner only went as far
as verifying that the clauses were all binary OpExprs. This works
99.99% of the time, because the clauses have the right shape when
emitted by the parser --- but it's possible for function inlining to
break that, as reported by PegoraroF10. To fix, teach the planner
to check that the LHS and RHS contain the right things, or more
accurately don't contain the wrong things. Given that this has been
broken for years without anyone noticing, it seems sufficient to just
give up hashing when it happens, rather than go to the trouble of
commuting the clauses back again (which wouldn't necessarily work
anyway).
While poking at that, I also noticed that nodeSubplan.c had a baked-in
assumption that the number of hash clauses is identical to the number
of subquery output columns. Again, that's fine as far as parser output
goes, but it's not hard to break it via function inlining. There seems
little reason for that assumption though --- AFAICS, the only thing
it's buying us is not having to store the number of hash clauses
explicitly. Adding code to the planner to reject such cases would take
more code than getting nodeSubplan.c to cope, so I fixed it that way.
This has been broken for as long as we've had hashable SubPlans,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1549209182255-0.post@n3.nabble.com
Since we no longer require AccessExclusiveLock to add a partition,
the executor may see that a partitioned table has more partitions
than the planner saw. ExecCreatePartitionPruneState's code for
matching up the partition lists in such cases was faulty, and would
misbehave if the planner had successfully pruned any partitions from
the query. (Thus, trouble would occur only if a partition addition
happens concurrently with a query that uses both static and dynamic
partition pruning.) This led to an Assert failure in debug builds,
and probably to crashes or query misbehavior in production builds.
To repair the bug, just explicitly skip zeroes in the plan's
relid_map[] list. I also made some cosmetic changes to make the code
more readable (IMO anyway). Also, convert the cross-checking Assert
to a regular test-and-elog, since it's now apparent that this logic
is more fragile than one would like.
Currently, there's no way to repeatably exercise this code, except
with manual use of a debugger to stop the backend between planning
and execution. Hence, no test case in this patch. We oughta do
something about that testability gap, but that's for another day.
Amit Langote and Tom Lane, per report from Justin Pryzby. Oversight
in commit 898e5e329; backpatch to v12 where that appeared.
Discussion: https://postgr.es/m/20200802181131.GA27754@telsasoft.com
Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
Use HyperLogLog to estimate the group cardinality in a spilled
partition. This estimate is used to choose the number of partitions if
we recurse.
The previous behavior was to use the number of tuples in a spilled
partition as the estimate for the number of groups, which lead to
overpartitioning. That could cause the number of batches to be much
higher than expected (with each batch being very small), which made it
harder to interpret EXPLAIN ANALYZE results.
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/a856635f9284bc36f7a77d02f47bbb6aaf7b59b3.camel@j-davis.com
Backpatch-through: 13
There were various unnecessary differences between Hash Agg's EXPLAIN
ANALYZE output and Hash Join's. Here we modify the Hash Agg output so
that it's better aligned to Hash Join's.
The following changes have been made:
1. Start batches counter at 1 instead of 0.
2. Always display the "Batches" property, even when we didn't spill to
disk.
3. Use the text "Batches" instead of "HashAgg Batches" for text format.
4. Use the text "Memory Usage" instead of "Peak Memory Usage" for text
format.
5. Include "Batches" before "Memory Usage" in both text and non-text
formats.
In passing also modify the "Planned Partitions" property so that we show
it regardless of if the value is 0 or not for non-text EXPLAIN formats.
This was pointed out by Justin Pryzby and probably should have been part
of 40efbf870.
Reviewed-by: Justin Pryzby, Jeff Davis
Discussion: https://postgr.es/m/CAApHDvrshRnA6C0VFnu7Fb9TVvgGo80PUMm5+2DiaS1gEkPvtw@mail.gmail.com
Backpatch-through: 13, where HashAgg batching was introduced
Commit 85c9d347 addressed a similar problem for Gather and Gather
Merge nodes but forgot to account for nodes above parallel nodes. This
still works for nodes above Gather node because we shut down the workers
for Gather node as soon as there are no more tuples. We can do a similar
thing for Gather Merge as well but it seems better to account for stats
during nodes shutdown after completing the execution.
Reported-by: Stéphane Lorek, Jehan-Guillaume de Rorthais
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/20200718160206.584532a2@firost
The term "hash_mem" will take on new significance when pending work to
add a new hash_mem_multiplier GUC is committed. Rename a local variable
that happens to have been called hash_mem now to avoid confusion.
This representation saves 8 bytes per tuple compared to HeapTuple, and
avoids the need to allocate, copy and free on the receiving side.
Gather can emit the returned MinimalTuple directly, but GatherMerge now
needs to make an explicit copy because it buffers multiple tuples at a
time. That should be no worse than before.
Reviewed-by: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2B8T_ggoUTAE-U%3DA%2BOcPc4%3DB0nPPHcSfffuQhvXXjML6w%40mail.gmail.com
Since 1f39bce02, HashAgg nodes have had the ability to spill to disk when
memory consumption exceeds work_mem. That commit added new properties to
EXPLAIN ANALYZE to show the maximum memory usage and disk usage, however,
it didn't quite go as far as showing that information for parallel
workers. Since workers may have experienced something very different from
the main process, we should show this information per worker, as is done
in Sort.
Reviewed-by: Justin Pryzby
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/CAApHDvpEKbfZa18mM1TD7qV6PG+w97pwCWq5tVD0dX7e11gRJw@mail.gmail.com
Backpatch-through: 13, where the hashagg spilling code was added.
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
plpgsql has always executed the query given in a RETURN QUERY command
by opening it as a cursor and then fetching a few rows at a time,
which it turns around and dumps into the function's result tuplestore.
The point of this was to keep from blowing out memory with an oversized
SPITupleTable result (note that while a tuplestore can spill tuples
to disk, SPITupleTable cannot). However, it's rather inefficient, both
because of extra data copying and because of executor entry/exit
overhead. In recent versions, a new performance problem has emerged:
use of a cursor prevents use of a parallel plan for the executed query.
We can improve matters by skipping use of a cursor and having the
executor push result tuples directly into the function's result
tuplestore. However, a moderate amount of new infrastructure is needed
to make that idea work:
* We can use the existing tstoreReceiver.c DestReceiver code to funnel
executor output to the tuplestore, but it has to be extended to support
plpgsql's requirement for possibly applying a tuple conversion map.
* SPI needs to be extended to allow use of a caller-supplied
DestReceiver instead of its usual receiver that puts tuples into
a SPITupleTable. Two new API calls are needed to handle both the
RETURN QUERY and RETURN QUERY EXECUTE cases.
I also felt that I didn't want these new API calls to use the legacy
method of specifying query parameter values with "char" null flags
(the old ' '/'n' convention); rather they should accept ParamListInfo
objects containing the parameter type and value info. This required
a bit of additional new infrastructure since we didn't yet have any
parse analysis callback that would interpret $N parameter symbols
according to type data supplied in a ParamListInfo. There seems to be
no harm in letting makeParamList install that callback by default,
rather than leaving a new ParamListInfo's parserSetup hook as NULL.
(Indeed, as of HEAD, I couldn't find anyplace that was using the
parserSetup field at all; plpgsql was using parserSetupArg for its
own purposes, but parserSetup seemed to be write-only.)
We can actually get plpgsql out of the business of using legacy null
flags altogether, and using ParamListInfo instead of its ad-hoc
PreparedParamsData structure; but this requires inventing one more
SPI API call that can replace SPI_cursor_open_with_args. That seems
worth doing, though.
SPI_execute_with_args and SPI_cursor_open_with_args are now unused
anywhere in the core PG distribution. Perhaps someday we could
deprecate/remove them. But cleaning up the crufty bits of the SPI
API is a task for a different patch.
Per bug #16040 from Jeremy Smith. This is unfortunately too invasive to
consider back-patching. Patch by me; thanks to Hamid Akhtar for review.
Discussion: https://postgr.es/m/16040-eaacad11fecfb198@postgresql.org
Synchronize the event names for parallel hash join waits with other
event names, by getting rid of the slashes and dropping "-ing"
suffixes. Rename ClogGroupUpdate to XactGroupUpdate, to match the
new SLRU name. Move the ProcSignalBarrier event to the IPC category;
it doesn't belong under IO.
Also a bit more wordsmithing in the wait event documentation tables.
Discussion: https://postgr.es/m/4505.1589640417@sss.pgh.pa.us
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
In a logical replication subscriber, a table using REPLICA IDENTITY FULL
which has a primary key would try to use the primary key's index
available to scan for a tuple, but an assertion only assumed as correct
the case of an index associated to REPLICA IDENTITY USING INDEX. This
commit corrects the assertion so as the use of a primary key index is a
valid case.
Reported-by: Dilip Kumar
Analyzed-by: Dilip Kumar
Author: Euler Taveira
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/CAFiTN-u64S5bUiPL1q5kwpHNd0hRnf1OE-bzxNiOs5zo84i51w@mail.gmail.com
Backpatch-through: 10
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
ExecReScanIncrementalSort was resetting bounded=false, which means the
optimization would be disabled on all rescans. This happens because
ExecSetTupleBound is called before the rescan, not after it.
Author: James Coleman
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200414065336.GI1492@paquier.xyz
The executor flags were not handled entirely correctly, although the
bugs were mostly harmless and it was mostly comment inaccuracy. We don't
need to strip any of the flags for child nodes.
Incremental sort does not support backward scans of mark/restore, so
MARK/BACKWARDS flags should not be possible. So we simply ensure this
using an assert, and we don't bother removing them when initializing
the child node.
With REWIND it's a bit less clear - incremental sort does not support
REWIND, but there is no way to signal this - it's legal to just ignore
the flag. We however continue passing the flag to child nodes, because
they might be useful to leverage that.
Reported-by: Michael Paquier
Author: James Coleman
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200414065336.GI1492@paquier.xyz
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
In a9c35cf85c I changed ExecMakeTableFunctionResult() to dynamically
allocate the FunctionCallInfo used to call the SRF. Unfortunately I
did not account for the fact that the surrounding memory context has
query lifetime, leading to a leak till the end of the query.
In most cases the leak is fairly inconsequential, but if the
FunctionScan is done many times in the query, the leak can add
up. This happens e.g. if the function scan is on the inner side of a
nested loop, due to a lateral join.
EXPLAIN SELECT sum(f) FROM generate_series(1, 100000000) g(i), generate_series(i, i+1) f;
quickly shows the leak.
Instead of explicitly freeing the FunctionCallInfo it seems better to
make sure all the per-set temporary state in
ExecMakeTableFunctionResult() is cleaned up wholesale. Currently
that's probably just the FunctionCallInfo allocation, but since
there's some initialization work, and since there's already an
appropriate context, this seems like a more robust approach.
Bug: #16112
Reported-By: Ben Cornett
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/16112-4448bbf55a404189%40postgresql.org
Backpatch: 12, a9c35cf85c
Heikki Linnakangas
Tom Lane
Tomas Vondra
Michael Paquier
Peter Eisentraut
Jeff Davis
Alvaro Herrera
Peter Geoghegan
David Rowley
Amit Kapila
Thomas Munro
Andres Freund