We previously recognized that citext wouldn't get marked as collatable
during pg_upgrade from a pre-9.1 installation, and hacked its
create-from-unpackaged script to manually perform the necessary catalog
adjustments. However, we overlooked the fact that domains over citext,
as well as the citext[] array type, need the same adjustments. Extend
the script to handle those cases.
Also, the documentation suggested that this was only an issue in pg_upgrade
scenarios, which is quite wrong; loading any dump containing citext from a
pre-9.1 server will also result in the type being wrongly marked.
I approached the documentation problem by changing the 9.1.2 release note
paragraphs about this issue, which is historically inaccurate. But it
seems better than having the information scattered in multiple places, and
leaving incorrect info in the 9.1.2 notes would be bad anyway. We'll still
need to mention the issue again in the 9.1.4 notes, but perhaps they can
just reference 9.1.2 for fix instructions.
Per report from Evan Carroll. Back-patch into 9.1.
Display total time and I/O timings in milliseconds, for consistency with
the units used for timings in the core statistics views. The columns
remain of float8 type, so that sub-msec precision is available. (At some
point we will probably want to convert the core views to use float8 type
for the same reason, but this patch does not touch that issue.)
This is a release-note-requiring change in the meaning of the total_time
column. The I/O timing columns are new as of 9.2, so there is no
compatibility impact from redefining them.
Do some minor copy-editing in the documentation, too.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
Remove lots of outdated information that is duplicated by the
better-maintained SGML documentation. In particular, remove the
outdated listing of contrib modules. Update the installation
instructions to mention CREATE EXTENSION, but don't go into too much
detail.
default tablespace, but part of a database that is in a user-defined
tablespace. Caused "file not found" error during upgrade.
Per bug report from Ants Aasma.
Backpatch to 9.1 and 9.0.
There's no need to sit there and increment the stats when we know all the
increments would be zero anyway. The actual additions might not be very
expensive, but skipping acquisition of the spinlock seems like a good
thing. Pushing the logic about initialization of the usage count down into
entry_alloc() allows us to do that while making the code actually simpler,
not more complex. Expansion on a suggestion by Peter Geoghegan.
This patch addresses a deficiency in the previous pg_stat_statements patch.
We want to give sticky entries an initial "usage" factor high enough that
they probably will stick around until their query is completed. However,
if the query never completes (eg it gets an error during execution), the
entry shouldn't persist indefinitely. Manage this by starting out with
a usage setting equal to the (approximate) median usage value within the
whole hashtable, but decaying the value much more aggressively than we
do for normal entries.
Peter Geoghegan
If we make the initially-called function return the table physical-size
estimate, acquire_inherited_sample_rows will be able to use that to
allocate numbers of samples among child tables, when the day comes that
we want to support foreign tables in inheritance trees.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
This patch provides a test case for libpq's row processor API.
contrib/dblink can deal with very large result sets by dumping them into
a tuplestore (which can spill to disk) --- but until now, the intermediate
storage of the query result in a PGresult meant memory bloat for any large
result. Now we use a row processor to convert the data to tuple form and
dump it directly into the tuplestore.
A limitation is that this only works for plain dblink() queries, not
dblink_send_query() followed by dblink_get_result(). In the latter
case we don't know the desired tuple rowtype soon enough. While hack
solutions to that are possible, a different user-level API would
probably be a better answer.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
dblink_exec leaked temporary database connections if any error occurred
after connection setup, for example
SELECT dblink_exec('...connect string...', 'select 1/0');
Add a PG_TRY block to ensure PQfinish gets done when it is needed.
(dblink_record_internal is on the hairy edge of needing similar treatment,
but seems not to be actively broken at the moment.)
Also, in 9.0 and up, only one of the three functions using tuplestore
return mode was properly checking that the query context would allow
a tuplestore result.
Noted while reviewing dblink patch. Back-patch to all supported branches.
The DBLINK_GET_CONN and DBLINK_GET_NAMED_CONN macros did not set the
surrounding function's conname variable, causing errors to be incorrectly
reported as having occurred on the "unnamed" connection in some cases.
This bug was actually visible in two cases in the regression tests,
but apparently whoever added those cases wasn't paying attention.
Noted by Kyotaro Horiguchi, though this is different from his proposed
patch.
Back-patch to 8.4; 8.3 does not have the same type of error reporting
so the patch is not relevant.
It's actually more useful for the module to ignore these. Ignoring
EXECUTE (and not incrementing the nesting level) allows the executor
hooks to charge the time to the underlying prepared query, which
shows up as a stats entry with the original PREPARE as query string
(possibly modified by suppression of constants, which might not be
terribly useful here but it's not worth avoiding). This is much more
useful than cluttering the stats table with a distinct entry for each
textually distinct EXECUTE.
Experimentation with this idea shows that it's also preferable to ignore
PREPARE. If we don't, we get two stats table entries, one with the query
string hash and one with the jumble-derived hash, but with the same visible
query string (modulo those constants). This is confusing and not very
helpful, since the first entry will only receive costs associated with
initial planning of the query, which is not something counted at all
normally by pg_stat_statements. (And if we do start tracking planning
costs, we'd want them blamed on the other hash table entry anyway.)
When tracking nested statements, contrib/pg_stat_statements formerly
double-counted the execution costs of utility statements that directly
contain an executable statement, such as EXPLAIN and DECLARE CURSOR.
This was not obvious since the ProcessUtility and Executor hooks
would each add their measured costs to the same stats table entry.
However, with the new implementation that hashes utility and plannable
statements differently, this showed up as seemingly-duplicate stats
entries. Fix that by disabling the Executor hooks when the query has a
queryId of zero, which was the case already for such statements but is now
more clearly specified in the code. (The zero queryId was causing problems
anyway because all such statements would add to a single bogus entry.)
The PREPARE/EXECUTE case still results in counting the same execution
in two different stats table entries, but it should be much less surprising
to users that there are two entries in such cases.
In passing, include a CommonTableExpr's ctename in the query hash.
I had left it out originally on the grounds that we wanted to omit all
inessential aliases, but since RTE_CTE RTEs are hashing their referenced
names, we'd better hash the CTE names too to make sure we don't hash
semantically different queries the same.
pg_stat_statements now hashes selected fields of the analyzed parse tree
to assign a "fingerprint" to each query, and groups all queries with the
same fingerprint into a single entry in the pg_stat_statements view.
In practice it is expected that queries with the same fingerprint will be
equivalent except for values of literal constants. To make the display
more useful, such constants are replaced by "?" in the displayed query
strings.
This mechanism currently supports only optimizable queries (SELECT,
INSERT, UPDATE, DELETE). Utility commands are still matched on the
basis of their literal query strings.
There remain some open questions about how to deal with utility statements
that contain optimizable queries (such as EXPLAIN and SELECT INTO) and how
to deal with expiring speculative hashtable entries that are made to save
the normalized form of a query string. However, fixing these issues should
require only localized changes, and since there are other open patches
involving contrib/pg_stat_statements, it seems best to go ahead and commit
what we've got.
Peter Geoghegan, reviewed by Daniel Farina
Instead of just stopping after removing an arbitrary subset of orphaned
large objects, commit and start a new transaction after each -l objects.
This is just as effective as the original patch at limiting the number of
locks used, and it doesn't require doing the OID collection process
repeatedly to get everything. Since the option no longer changes the
fundamental behavior of vacuumlo, and it avoids a known server-side
limitation, enable it by default (with a default limit of 1000 LOs per
transaction).
In passing, be more careful about properly quoting the names of tables
and fields, and do some other cosmetic cleanup.
the non-development install. Instead, use the LOAD mechanism to check
for the pg_upgrade_support shared object, like we do for other shared
object checks.
Backpatch to 9.1.
Report from Àlvaro
This is intended as infrastructure to allow sepgsql to cooperate with
connection pooling software, by allowing the effective security label
to be set for each new connection.
KaiGai Kohei, reviewed by Yeb Havinga.
Extracted from a larger patch by Jaime Casanova, reviewed by Noah Misch.
I think this error message could use some more extensive revision, but
this at least makes the handling of spgist consistent with what we do for
other types of indexes that this code doesn't know how to handle.
add ability to control permissions of created files
have psql echo its queries for easier debugging
output four separate log files, and delete them on success
add -r/--retain option to keep log files after success
make logs file append-only
remove -g/-G/-l logging options
sugggest tailing appropriate log file on failure
enhance -v/--verbose behavior
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
GetForeignColumnOptions provides some abstraction for accessing
column-specific FDW options, on a par with the access functions that were
already provided here for other FDW-related information.
Adjust file_fdw.c to use GetForeignColumnOptions instead of equivalent
hand-rolled code.
In addition, add some SGML documentation for the functions exported by
foreign.c that are meant for use by FDW authors.
(This is the fdw_helper portion of the proposed pgsql_fdw patch.)
Hanada Shigeru, reviewed by KaiGai Kohei
The original API specification only allowed an FDW to create a single
access path, which doesn't seem like a terribly good idea in hindsight.
Instead, move the responsibility for building the Path node and calling
add_path() into the FDW's PlanForeignScan function. Now, it can do that
more than once if appropriate. There is no longer any need for the
transient FdwPlan struct, so get rid of that.
Etsuro Fujita, Shigeru Hanada, Tom Lane
Since the current version is 1.1, the 1.0 file isn't really needed. We do
need the 1.0--1.1 upgrade file, so people on 1.0 can upgrade.
Per recent discussion on pgsql-hackers.
The array intersection code would give wrong results if the first entry of
the correct output array would be "1". (I think only this value could be
at risk, since the previous word would always be a lower-bound entry with
that fixed value.)
Problem spotted by Julien Rouhaud, initial patch by Guillaume Lelarge,
cosmetic improvements by me.
This is some preliminary refactoring related to a pending patch
to allow sepgsql-enable sessions to make dynamic label transitions.
But this commit doesn't involve any functional change: it just puts
some bits of code in more logical places.
KaiGai Kohei
The hstore and json datatypes both have record-conversion functions that
pay attention to column names in the composite values they're handed.
We used to not worry about inserting correct field names into tuple
descriptors generated at runtime, but given these examples it seems
useful to do so. Observe the nicer-looking results in the regression
tests whose results changed.
catversion bump because there is a subtle change in requirements for stored
rule parsetrees: RowExprs from ROW() constructs now have to include field
names.
Andrew Dunstan and Tom Lane
Sometimes it may be useful to get actual row counts out of EXPLAIN
(ANALYZE) without paying the cost of timing every node entry/exit.
With this patch, you can say EXPLAIN (ANALYZE, TIMING OFF) to get that.
Tomas Vondra, reviewed by Eric Theise, with minor doc changes by me.
In dry-run mode, just the name of the file to be removed is printed to
stdout; this is so the user can easily plug it into another program
through a pipe. If debug mode is also specified, a more verbose message
is printed to stderr.
Author: Gabriele Bartolini
Reviewer: Josh Kupershmidt
Due to oversights, the encrypt_iv() and decrypt_iv() functions failed to
report certain types of invalid-input errors, and would instead return
random garbage values.
Marko Kreen, per report from Stefan Kaltenbrunner
have pg_upgrade allocate a maximum fixed size buffer for testing the
library file name, rather than base the allocation on the library name.
Backpatch to 9.1.
The original coding examined the next character before verifying that
there *is* a next character. In the worst case with the input buffer
right up against the end of memory, this would result in a segfault.
Problem spotted by Paul Guyot; this commit extends his patch to fix an
additional case. In addition, make the code a tad more readable by not
overloading the usage of *tlen.
All supported platforms support the C89 standard function atexit()
(SunOS 4 probably being the last one not to), and supporting both
makes the code clumsy.
Instead, add a function pg_tablespace_location(oid) used to return
the same information, and do this by reading the symbolic link.
Doing it this way makes it possible to relocate a tablespace when the
database is down by simply changing the symbolic link.
It runs the regression tests, runs pg_upgrade on the populated
database, and compares the before and after dumps. While not actually
a cross-version upgrade, this does detect omissions and bugs in the
involved tools from time to time. It's also possible to do a
cross-version upgrade by manually supplying parameters.
If the existing citext type has not merely been created, but used in any
tables, then the upgrade script wasn't doing enough. We have to update
attcollation for each citext table column, and indcollation for each citext
index column, as well. Per report from Rudolf van der Leeden.
Since PostgreSQL 9.0, we've emitted a warning message when an operator
named => is created, because the SQL standard now reserves that token
for another use. But we've also shipped such an operator with hstore.
Use of the function hstore(text, text) has been recommended in
preference to =>(text, text). Per discussion, it's now time to take
the next step and stop shipping the operator. This will allow us to
prohibit the use of => as an operator name in a future release if and
when we wish to support the SQL standard use of this token.
The release notes should mention this incompatibility.
Patch by me, reviewed by David Wheeler, Dimitri Fontaine and Tom Lane.
Make it use t_isspace() to identify whitespace, rather than relying on
sscanf which is known to get it wrong on some platform/locale combinations.
Get rid of fixed-size buffers. Make it actually continue to parse the file
after ignoring a line with untranslatable characters, as was obviously
intended.
The first of these issues is per gripe from J Smith, though not exactly
either of his proposed patches.
Both dict_int and dict_xsyn were blithely assuming that whatever memory
palloc gives back will be pre-zeroed. This would typically work for
just about long enough to run their regression tests, and no longer :-(.
The pre-9.0 code in dict_xsyn was even lamer than that, as it would
happily give back a pointer to the result of palloc(0), encouraging
its caller to access off the end of memory. Again, this would just
barely fail to fail as long as memory contained nothing but zeroes.
Per a report from Rodrigo Hjort that code based on these examples
didn't work reliably.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
A similar problem for pgstattuple() was fixed in April of 2010 by commit
33065ef8bc, but pgstatindex() seems to have
been overlooked.
Back-patch all the way, as with that commit, though not to 7.4 through
8.1, since those are now EOL.
Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
Since gtrgm_penalty() is usually called many times in a row with the same
"newval" (to determine which item on an index page newval fits into best),
the makesign() calculation is repetitious. It's expensive enough to make
it worth caching the result, so do so. On my machine this is good for
more than a 40% savings in the time needed to build a trigram index on
/usr/share/dict/words. This is all per a suggestion of Heikki's.
In passing, make some mostly-cosmetic improvements in the caching logic in
the other functions in this file that rely on caching info in fn_extra.
Because these tests require root privileges, not to mention invasive
changes to the security configuration of the host system, it's not
reasonable for them to be invoked by a regular "make check" or "make
installcheck". Instead, dike out the Makefile's knowledge of the tests,
and change chkselinuxenv (now renamed "test_sepgsql") into a script that
verifies the environment is workable and then runs the tests. It's
expected that test_sepgsql will only be run manually.
While at it, do some cleanup in the error checking in the script, and
do some wordsmithing in the documentation.
This is implemented as a per-column boolean option, rather than trying
to match COPY's convention of a single option listing the column names.
Shigeru Hanada, reviewed by KaiGai Kohei
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
Add __attribute__ decorations for printf format checking to the places that
were missing them. Fix the resulting warnings. Add
-Wmissing-format-attribute to the standard set of warnings for GCC, so these
don't happen again.
The warning fixes here are relatively harmless. The one serious problem
discovered by this was already committed earlier in
cf15fb5cab.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Don't test whether the number of labels is numerically equal to zero;
count(*) isn't going return zero anyway, and the current coding blows
up if it returns an empty string or an error.
There's no reason for this test to use the undocumented pg_prepared_xact()
function, when it can use the stable API pg_prepared_xacts instead.
Fixes breakage against 8.3, as reported by Justin Arnold.
For an empty index, the pgstatindex() function would compute 0.0/0.0 for
its avg_leaf_density and leaf_fragmentation outputs. On machines that
follow the IEEE float arithmetic standard with any care, that results in
a NaN. However, per report from Rushabh Lathia, Microsoft couldn't
manage to get this right, so you'd get a bizarre error on Windows.
Fix by forcing the results to be NaN explicitly, rather than relying on
the division operator to give that or the snprintf function to print it
correctly. I have some doubts that this is really the most useful
definition, but it seems better to remain backward-compatible with
those platforms for which the behavior wasn't completely broken.
Back-patch to 8.2, since the code is like that in all current releases.
The previous coding resulted in contrib modules unintentionally overriding
the use of CONTRIB_TESTDB. There seems no particularly good reason to
allow that (after all, the makefile can set CONTRIB_TESTDB if that's really
what it intends).
In passing, document REGRESS_OPTS where the other pgxs.mk options are
documented.
Back-patch to 9.1 --- in prior versions, there were no cases of contrib
modules setting REGRESS_OPTS without including the --dbname switch, so
while the coding was fragile there was no actual bug.
We'll have to settle for just listing the extensions' data types,
since function arguments seem to sort differently in different locales.
Per buildfarm results.
When we implemented extensions, we made findDependentObjects() treat
EXTENSION dependency links similarly to INTERNAL links. However, that
logic contained an implicit assumption that an object could have at most
one INTERNAL dependency, so it did not work correctly for objects having
both INTERNAL and DEPENDENCY links. This led to failure to drop some
extension member objects when dropping the extension. Furthermore, we'd
never actually exercised the case of recursing to an internally-referenced
(owning) object from anything other than a NORMAL dependency, and it turns
out that passing the incoming dependency's flags to the owning object is
the Wrong Thing. This led to sometimes dropping a whole extension silently
when we should have rejected the drop command for lack of CASCADE.
Since we obviously were under-testing extension drop scenarios, add some
regression test cases. Unfortunately, such test cases require some
extensions (duh), so we can't test for problems in the core regression
tests. I chose to add them to the earthdistance contrib module, which is
a good test case because it has a dependency on the cube contrib module.
Back-patch to 9.1. Arguably these are pre-existing bugs in INTERNAL
dependency handling, but since it appears that the cases can never arise
pre-9.1, I'll refrain from back-patching the logic changes further than
that.
Eliminate dependencies on "which", as we don't really need that to be
installed for proper testing. Don't number the tests, as that increases
the footprint of every patch that wants to add or remove tests. Make
the test output more informative, so that it's a bit easier to see what
went right (or wrong). Spelling and grammar improvements.
contrib/xml2 can get by without libxslt; the relevant features just
won't work. But if doesn't have libxml2, or if sepgsql doesn't have
libselinux, the link succeeds but the module then fails to work at load
time. To avoid that, link the require libraries unconditionally, so
that it will be clear at link-time that there is a problem.
Per discussion with Tom Lane and KaiGai Kohei.
Also, handle failure better: don't just blindly keep trying to delete
stuff after the transaction has already failed.
Tim Lewis, reviewed by Josh Kupershmidt, with further hacking by me.
The old check against MAX_RANDOM_VALUE is clearly irrelevant since
getrand() no longer calls random(). Instead, check whether min and max
are close enough together to avoid an overflow inside getrand(), as
suggested by Tom Lane. This is still somewhat silly, because we're
using atoi(), which doesn't check for overflow anyway and (at least on
my system) will cheerfully return 0 when given "4294967296". But that's
a problem for another commit.
glibc renders random() thread-safe by wrapping a futex lock around it;
testing reveals that this limits the performance of pgbench on machines
with many CPU cores. Rather than switching to random_r(), which is
only available on GNU systems and crashes unless you use undocumented
alchemy to initialize the random state properly, switch to our built-in
implementation of erand48(), which is both thread-safe and concurrent.
Since the list of reasons not to use the operating system's erand48()
is getting rather long, rename ours to pg_erand48() (and similarly
for our implementations of lrand48() and srand48()) and just always
use those. We were already doing this on Cygwin anyway, and the
glibc implementation is not quite thread-safe, so pgbench wouldn't
be able to use that either.
Per discussion with Tom Lane.
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
Add errno-based output to error messages where appropriate, reformat
blocks to about 72 characters per line, use spaces instead of tabs for
indentation, and other style adjustments.
This was already a runtime failure condition, but it's better to check
at validation time if possible. Lightly modified version of a patch
by Shigeru Hanada.
Certain subdirectories do not get built if corresponding options are not
selected at configure time. However, "make distprep" should visit such
directories anyway, so that constructing derived files to be included in
the tarball happens without requiring all configure options to be given
in the tarball build script. Likewise, it's better if cleanup actions
unconditionally visit all directories (for example, this ensures proper
cleanup if someone has done a manual make in such a subdirectory).
To handle this, set up a convention that subdirectories that are
conditionally included in SUBDIRS should be added to ALWAYS_SUBDIRS
instead when they are excluded.
Back-patch to 9.1, so that plpython's spiexceptions.h will get provided
in 9.1 tarballs. There don't appear to be any instances where distprep
actions got missed in previous releases, and anyway this fix requires
gmake 3.80 so we don't want to apply it before 9.1.
A password containing a character with the high bit set was misprocessed
on machines where char is signed (which is most). This could cause the
preceding one to three characters to fail to affect the hashed result,
thus weakening the password. The result was also unportable, and failed
to match some other blowfish implementations such as OpenBSD's.
Since the fix changes the output for such passwords, upstream chose
to provide a compatibility hack: password salts beginning with $2x$
(instead of the usual $2a$ for blowfish) are intentionally processed
"wrong" to give the same hash as before. Stored password hashes can
thus be modified if necessary to still match, though it'd be better
to change any affected passwords.
In passing, sync a couple other upstream changes that marginally improve
performance and/or tighten error checking.
Back-patch to all supported branches. Since this issue is already
public, no reason not to commit the fix ASAP.
This is an ugly hack to get around the fact that significant parts of the
core backend assume they don't need to worry about passing collation to
equality and hashing functions. That's true for the core string datatypes,
but citext should ideally have equality behavior that depends on the
specified collation's LC_CTYPE. However, there's no chance of fixing the
core before 9.2, so we'll have to live with this compromise arrangement for
now. Per bug #6053 from Regina Obe.
The code changes in this commit should be reverted in full once the core
code is up to speed, but be careful about reverting the docs changes:
I fixed a number of obsolete statements while at it.
For consistency, have all non-ASCII characters from contributors'
names in the source be in UTF-8. But remove some other more
gratuitous uses of non-ASCII characters.
For consistency with other tools, put the options before further usage
information.
In pg_standby, remove the supposedly deprecated -l option from the
given example invocation.
the connection; also restructure the libpq connection code.
This patch also removes the unused variable postmasterPID and fixes a
libpq structure leak that was in the testing loop.
Added a new option --extra-install to pg_regress to arrange installing
the respective contrib directory into the temporary installation.
This is currently not yet supported for Windows MSVC builds.
Updated the .gitignore files for contrib modules to ignore the
leftovers of a temp-install check run.
Changed the exit status of "make check" in a pgxs build (which still
does nothing) to 0 from 1.
Added "make check" in contrib to top-level "make check-world".
This option turns off autovacuum, prevents non-super-user connections,
and enables oid setting hooks in the backend. The code continues to use
the old autoavacuum disable settings for servers with earlier catalog
versions.
This includes a catalog version bump to identify servers that support
the -b option.
Make use of the collation attached to the index column, instead of
hard-wiring DEFAULT_COLLATION_OID. (Note: in theory this could require
reindexing btree_gist indexes on textual columns, but I rather doubt anyone
has one with a non-default declared collation as yet.)
Using DEFAULT_COLLATION_OID in the comparePartial functions was not only
a lame hack, but outright wrong, because the compare functions for
collation-aware types were already responding to the declared index
collation. So comparePartial would have the wrong expectation about
the index's sort order, possibly leading to missing matches for prefix
searches.
If someone removes the 'postgres' database from the old cluster and the
new cluster has a 'postgres' database, the number of databases will not
match. We actually could upgrade such a setup, but it would violate the
1-to-1 mapping of database counts, so we throw an error instead.
Previously they got an error during the upgrade, and not at the check
stage; PG 9.0.4 does the same.
... for some value of "properly". Instead of overriding REGRESS_OPTS,
set the variables ENCODING and NO_LOCALE, which is more expressive and
allows overriding by the user. Fix vcregress.pl to handle that.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
Although there remains some debate about how CREATE TYPE should represent
the collation property, this doesn't really affect what we need to do in
citext's script, so go ahead and fix that.
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
HeapTupleHeader's t_infomask and t_infomask2 are defined as 16-bit
unsigned integers, so when the 16th bit was set, heap_page_item was
returning them as negative values, which was ugly.
The change to pageinspect--unpackaged--1.0.sql allows a module upgraded
from 9.0 to be cleanly updated from the previous definition.
File encodings can be specified separately from client encoding.
If not specified, client encoding is used for backward compatibility.
Cases when the encoding doesn't match client encoding are slower
than matched cases because we don't have conversion procs for other
encodings. Performance improvement would be be a future work.
Original patch by Hitoshi Harada, and modified by me.
Tom Lane
Peter Eisentraut
Robert Haas
Bruce Momjian
Andrew Dunstan
Alvaro Herrera
Magnus Hagander
Joe Conway
Heikki Linnakangas
Itagaki Takahiro