createplan.c tries to save a runtime projection step by specifying
a scan plan node's output as being exactly the table's columns, or
index's columns in the case of an index-only scan, if there is not a
reason to do otherwise. This logic did not previously pay attention
to whether an index's columns are returnable. That worked, sort of
accidentally, until commit 9a3ddeb51 taught setrefs.c to reject plans
that try to read a non-returnable column. I have no desire to loosen
setrefs.c's new check, so instead adjust use_physical_tlist() to not
try to optimize this way when there are non-returnable column(s).
Per report from Ryan Kelly. Like the previous patch, back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAHUie24ddN+pDNw7fkhNrjrwAX=fXXfGZZEHhRuofV_N_ftaSg@mail.gmail.com
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
The connection strings in the SSL client tests were using the host
set up from Cluster.pm which is a temporary pathname. When SNI is
enabled we pass the host to OpenSSL in order to set the server name
indication ClientHello extension via SSL_set_tlsext_host_name.
OpenSSL doesn't validate the hostname apart from checking the max
length, but LibreSSL checks for RFC 5890 conformance which results
in errors during testing as the pathname from Cluster.pm is not a
valid hostname.
Fix by setting the host explicitly to localhost, as that's closer
to the intent of the test.
Backpatch through 14 where SNI support came in.
Reported-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/17391-304f81bcf724b58b@postgresql.org
Backpatch-through: 14
Some pre-2017 Test::More versions need perfect $Test::Builder::Level
maintenance to find the variable. Buildfarm member snapper reported an
overall failure that the file intended to hide via the TODO construct.
That trouble was reachable in v11 and v10. For later branches, this
serves as defense in depth. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220202055556.GB2745933@rfd.leadboat.com
src/backend/utils/misc/check_guc is a script that cross-checks the
consistency of the GUCs with postgresql.conf.sample, making sure that
its format is in line with what guc.c has. It has never been run
automatically, and has rotten over the years, creating a lot of false
positives as per a report from Justin Pryzby.
d10e41d has introduced a SQL function to publish the most relevant flags
associated to a GUC, with tests added in the main regression test suite
to make sure that we avoid most of the inconsistencies in the GUC
settings, based on recent reports, but there was nothing able to
cross-check postgresql.conf.sample with the contents of guc.c.
This commit adds a TAP test that covers the remaining gap. It emulates
the most relevant checks that check_guc does, so as any format mistakes
are detected in postgresql.conf.sample at development stage, with the
following checks:
- Check that parameters marked as NOT_IN_SAMPLE are not in the sample
file.
- Check that there are no dead entries in postgresql.conf.sample for
parameters not marked as NOT_IN_SAMPLE.
- Check that no parameters are missing from the sample file if listed in
guc.c without NOT_IN_SAMPLE.
The idea of building a list of the GUCs by parsing the sample file comes
from Justin, and he wrote the regex used in the patch to find all the
GUCs (this same formatting rule basically applies for the last 20~ years
or so). In order to test this patch, I have played with manual
modifications of postgresql.conf.sample and guc.c, making sure that we
detect problems with the GUC rules and the sample file format.
The test is located in src/test/modules/test_misc, which is the best
location I could think about for such sanity checks.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/Yf9YGSwPiMu0c7fP@paquier.xyz
Rename create_function_0 to create_function_c, and create_function_3
to create_function_sql, to establish their charters more clearly.
This should also reduce confusion versus our underscore-digit
convention for naming variant expected-files.
I separated this from the previous commit on the premise that keeping
the renaming distinct might make "git blame" tracking easier.
Discussion: https://postgr.es/m/1114748.1640383217@sss.pgh.pa.us
The idea behind this patch is to make it possible to run individual
test scripts without running the entire core test suite. Making all
the scripts completely independent would involve a massive rewrite,
and would probably be worse for coverage of things like concurrent DDL.
So this patch just does what seems practical with limited changes.
The net effect is that any test script can be run after running
limited earlier dependencies:
* all scripts depend on test_setup
* many scripts depend on create_index
* other dependencies are few in number, and are documented in
the parallel_schedule file.
To accomplish this, I chose a small number of commonly-used tables
and moved their creation and filling into test_setup. Later scripts
are expected not to modify these tables' data contents, for fear of
affecting other scripts' results. Also, our former habit of declaring
all C functions in one place is now gone in favor of declaring them
where they're used, if that's just one script, or in test_setup if
necessary.
There's more that could be done to remove some of the remaining
inter-script dependencies, but significantly more-invasive changes
would be needed, and at least for now it doesn't seem worth it.
Discussion: https://postgr.es/m/1114748.1640383217@sss.pgh.pa.us
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
To avoid "ERROR: canceling statement due to conflict with recovery",
as seen on a couple of slower build farm animals, crank
max_standby_streaming_delay right up.
In passing, adjust a configuration option that accidentally used a
non-standard format (not a problem, but needlessly inconsistent).
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK65xVqNgsSPyrr2LEwtfUN%3DGfEuQ868hTC-mu0bFG42A%40mail.gmail.com
Teach canonicalize_path() how to strip all unnecessary uses of "."
and "..", replacing the previous ad-hoc code that got rid of only
some such cases. In particular, we can always remove all such
uses from absolute paths.
The proximate reason to do this is that Windows rejects paths
involving ".." in some cases (in particular, you can't put one in a
symlink), so we ought to be sure we don't use ".." unnecessarily.
Moreover, it seems like good cleanup on general principles.
There is other path-munging code that could be simplified now, but
we'll leave that for followup work.
It is tempting to call this a bug fix and back-patch it. On the other
hand, the misbehavior can only be reached if a highly privileged user
does something dubious, so it's not unreasonable to say "so don't do
that". And this patch could result in unexpected behavioral changes,
in case anybody was expecting uses of ".." to stay put. So at least
for now, just put it in HEAD.
Shenhao Wang, editorialized a bit by me
Discussion: https://postgr.es/m/OSBPR01MB4214FA221FFE046F11F2AD74F2D49@OSBPR01MB4214.jpnprd01.prod.outlook.com
The most meaningful flags are shown, which are the ones useful for the
user and for automating and extending the set of tests supported
currently by check_guc.
This script may actually be removed in the future, but we are not
completely sure yet if and how we want to support the remaining sanity
checks performed there, that are now integrated in the main regression
test suite as of this commit.
Thanks also to Peter Eisentraut and Kyotaro Horiguchi for the
discussion.
Bump catalog version.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211129030833.GJ17618@telsasoft.com
Although select_common_type() has a failure-return convention, an
apparent successful return just provides a type OID that *might* work
as a common supertype; we've not validated that the required casts
actually exist. In the mainstream use-cases that doesn't matter,
because we'll proceed to invoke coerce_to_common_type() on each input,
which will fail appropriately if the proposed common type doesn't
actually work. However, a few callers didn't read the (nonexistent)
fine print, and thought that if they got back a nonzero OID then the
coercions were sure to work.
This affects in particular the recently-added "anycompatible"
polymorphic types; we might think that a function/operator using
such types matches cases it really doesn't. A likely end result
of that is unexpected "ambiguous operator" errors, as for example
in bug #17387 from James Inform. Another, much older, case is that
the parser might try to transform an "x IN (list)" construct to
a ScalarArrayOpExpr even when the list elements don't actually have
a common supertype.
It doesn't seem desirable to add more checking to select_common_type
itself, as that'd just slow down the mainstream use-cases. Instead,
write a separate function verify_common_type that performs the
missing checks, and add a call to that where necessary. Likewise add
verify_common_type_from_oids to go with select_common_type_from_oids.
Back-patch to v13 where the "anycompatible" types came in. (The
symptom complained of in bug #17387 doesn't appear till v14, but
that's just because we didn't get around to converting || to use
anycompatible till then.) In principle the "x IN (list)" fix could
go back all the way, but I'm not currently convinced that it makes
much difference in real-world cases, so I won't bother for now.
Discussion: https://postgr.es/m/17387-5dfe54b988444963@postgresql.org
The invocation of pg_regress in 027_stream_regress.pl didn't specify the
host. It ends up working on most systems because of connection
defaults. However, on windows it makes the test very slow unless
PG_TEST_USE_UNIX_SOCKETS is used.
The problem is that windows resolves "localhost" to ::0, 127.0.0.1, the server
started only listens on 127.0.0.1. On windows refused TCP connections are
internally retried a few times, with back-off between tries, taking at least 2
seconds.
Noticed while investigating a complaint about the test's slow speed by Andrew
Dunstan.
Discussion: https://postgr.es/m/20220127220351.kyp3bdaukfytmoqx@alap3.anarazel.de
Perl instances on some msys toolchains (e.g. UCRT64) have their
configured osname set to 'MSWin32' rather than 'msys'. The test for
the msys2 platform is adjusted accordingly.
Backpatch to release 14.
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Commits 6c4a8903b et al. had a couple of deficiencies:
* The logic I added to Cluster::start to see if a PID file is present
could be fooled by a stale PID file left over from a previous
postmaster. To fix, if we're not sure whether we expect to find a
running postmaster or not, validate the PID using "kill 0".
* 017_shm.pl has a loop in which it just issues repeated Cluster::start
calls; this will fail if some invocation fails but leaves self->_pid
set. Per buildfarm results, the above fix is not enough to make this
safe: we might have "validated" a PID for a postmaster that exits
immediately after we look. Hence, match each failed start call with
a stop call that will get us back to the self->_pid == undef state.
Add a fail_ok option to Cluster::stop to make this work.
Discussion: https://postgr.es/m/CA+hUKGKV6fOHvfiPt8=dOKzvswjAyLoFoJF1iQXMNpi7+hD1JQ@mail.gmail.com
Since the test requires reproducible behavior from VACUUM, and since
DISABLE_PAGE_SKIPPING doesn't actually disable all forms of page
skipping, let's use a temporary table to avoid contention.
Back-patch to 12, like commit 3414099c.
Discussion: https://postgr.es/m/20220120052404.sonrhq3f3qgplpzj%40alap3.anarazel.de
"pg_ctl start" might start a new postmaster and then return failure
anyway, for example if PGCTLTIMEOUT is exceeded. If there is a
postmaster there, it's still incumbent on us to shut it down at
script end, so check for the PID file even though we are about
to fail.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/647439.1642622744@sss.pgh.pa.us
In adverse circumstances, the fsync calls cause this test to run for
quite a long time (multiple minutes) and even suffer timeout failures.
This seems to date from before we made an effort to disable fsync in
all our test cases; there's not a lot of point in using it if there's
not a plan to force an O/S crash during the test.
Discussion: https://postgr.es/m/440239.1642560607@sss.pgh.pa.us
Where we test vacuum_truncate's effects, sometimes this is failing to
truncate as expected on the build farm. That could be explained by page
skipping, so disable it explicitly, with the theory that commit fe246d1c
didn't go far enough.
Back-patch to 12, where the vacuum_truncate tests were added.
Discussion: https://postgr.es/m/CA%2BhUKGLT2UL5_JhmBzUgkdyKfc%3D5J-gJSQJLysMs4rqLUKLAzw%40mail.gmail.com
The tests added by 14d755b000 added a
test case for psql's \set ECHO errors. After the test, it then reset
this to \set ECHO none, which is the default. But the regression
tests are actually run under \set ECHO all (psql -a), so that would
have been the correct way to restore the previous state. Otherwise,
test cases added after that point would not have their input lines
displayed. This was never the intention, so fix this now.
The original coding (from c33869cc3) failed with "more than one row
returned by a subquery used as an expression" if there were unrelated
triggers of the same tgname on parent partitioned tables. (That's
possible because statement-level triggers don't get inherited.) Fix
by applying LIMIT 1 after sorting the candidates by inheritance level.
Also, wrap the subquery in a CASE so that we don't have to execute it at
all when the trigger is visibly non-inherited. Aside from saving some
cycles, this avoids the need for a confusing and undocumented NULLIF().
While here, tweak the format of the emitted query to look a bit
nicer for "psql -E", and add some explanation of this subquery,
because it badly needs it.
Report and patch by Justin Pryzby (with some editing by me).
Back-patch to v13 where the faulty code came in.
Discussion: https://postgr.es/m/20211217154356.GJ17618@telsasoft.com
Currently, database OIDs, relfilenodes, and tablespace OIDs can all
change when a cluster is upgraded using pg_upgrade. It seems better
to preserve them, because (1) it makes troubleshooting pg_upgrade
easier, since you don't have to do a lot of work to match up files
in the old and new clusters, (2) it allows 'rsync' to save bandwidth
when used to re-sync a cluster after an upgrade, and (3) if we ever
encrypt or sign blocks, we would likely want to use a nonce that
depends on these values.
This patch only arranges to preserve relfilenodes and tablespace
OIDs. The task of preserving database OIDs is left for another patch,
since it involves some complexities that don't exist in these cases.
Database OIDs have a similar issue, but there are some tricky points
in that case that do not apply to these cases, so that problem is left
for another patch.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Before, SQL-level boolean constants were represented by a string with
a cast, and internal Boolean values in DDL commands were usually
represented by Integer nodes. This takes the place of both of these
uses, making the intent clearer and having some amount of type safety.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
The need for this was foreseen long ago, but when record_eq
actually became hashable (in commit 01e658fa7), we missed updating
this spot.
Per bug #17363 from Elvis Pranskevichus. Back-patch to v14 where
the faulty commit came in.
Discussion: https://postgr.es/m/17363-f6d42fd0d726be02@postgresql.org
By default, wait_for_catchup() waits for the replication connection
to reach the primary's write LSN. That's fine, but in an apparent
attempt to save one query round-trip, it was coded so that we
executed pg_current_wal_lsn() again during each probe query.
Thus, we presented the standby with a moving target to be reached.
(While the test script itself couldn't be causing the write LSN
to advance while it's blocked in wait_for_catchup(), it's plenty
plausible that background activity such as autovacuum is emitting
more WAL.) That could make the test take longer than necessary,
and potentially it could mask bugs by allowing the standby to process
more WAL than a strict interpretation of the test scenario allows.
So, change wait_for_catchup() to do it "by the book", explicitly
collecting the write LSN to wait for at the outset.
Also, various call sites were instructing wait_for_catchup() to
wait for the standby to reach the primary's insert LSN rather than
its write LSN. This also seems like a bad idea. While in most
test scenarios those are the same, if they are different then the
inserted-but-not-yet-written WAL is not presently available to the
standby. The test isn't doing anything to make it become so, so
again we have the potential for unwanted test delay, perhaps even
a test timeout. (Again, background activity would be needed to
make this more than a hypothetical problem.) Hence, change the
callers where necessary so that the wait target is always the
primary's write LSN.
While at it, simplify callers by making use of wait_for_catchup's
default arguments wherever possible (the preceding change makes
this possible in more places than it was before). And rewrite
wait_for_catchup's documentation a bit.
Patch by me; thanks to Julien Rouhaud for review.
Discussion: https://postgr.es/m/2368336.1641843098@sss.pgh.pa.us
Add pg_statistic_ext_data.stxdinherit flag, so that for each extended
statistics definition we can store two versions of data - one for the
relation alone, one for the whole inheritance tree. This is analogous to
pg_statistic.stainherit, but we failed to include such flag in catalogs
for extended statistics, and we had to work around it (see commits
859b3003de, 36c4bc6e72 and 20b9fa308e).
This changes the relationship between the two catalogs storing extended
statistics objects (pg_statistic_ext and pg_statistic_ext_data). Until
now, there was a simple 1:1 mapping - for each definition there was one
pg_statistic_ext_data row, and this row was inserted while creating the
statistics (and then updated during ANALYZE). With the stxdinherit flag,
we don't know how many rows there will be (child relations may be added
after the statistics object is defined), so there may be up to two rows.
We could make CREATE STATISTICS to always create both rows, but that
seems wasteful - without partitioning we only need stxdinherit=false
rows, and declaratively partitioned tables need only stxdinherit=true.
So we no longer initialize pg_statistic_ext_data in CREATE STATISTICS,
and instead make that a responsibility of ANALYZE. Which is what we do
for regular statistics too.
Patch by me, with extensive improvements and fixes by Justin Pryzby.
Author: Tomas Vondra, Justin Pryzby
Reviewed-by: Tomas Vondra, Justin Pryzby
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since this test schedule is not run by default, it's next door to
unused. Moreover, its test coverage is very thin, and what there is
is just about entirely superseded by the src/test/recovery tests.
Let's drop it instead of carrying obsolete tests.
Discussion: https://postgr.es/m/3911012.1641246643@sss.pgh.pa.us
AFAICS we had no coverage of this point except in the seldom-used,
slated-for-removal standby_schedule test suite. Sequence updates
are enough different from regular table updates that it seems worth
covering them explicitly in src/test/recovery.
Discussion: https://postgr.es/m/999497.1641431891@sss.pgh.pa.us
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Add a new TAP test under src/test/recovery to run the standard
regression tests while a streaming replica replays the WAL. This
provides a basic workout for WAL decoding and redo code, and compares
the replicated result.
Optionally, enable (expensive) wal_consistency_checking if listed in
the env variable PG_TEST_EXTRA.
Reviewed-by: 綱川 貴之 (Takayuki Tsunakawa) <tsunakawa.takay@fujitsu.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
The tablespace tests in the main regression tests have been changed to
use "in-place" tablespaces, so that they work when streamed to a replica
on the same host. Add a new TAP test that exercises tablespaces with
absolute paths, for coverage.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
Remove the machinery from pg_regress that manages the testtablespace
directory. Instead, use "in-place" tablespaces, because they work
correctly when there is a streaming replica running on the same host.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
Commit 7745bc352 intended to ensure that whole-row Vars would be
printed with "::type" decoration in all contexts where plain
"var.*" notation would result in star-expansion, notably in
ROW() and VALUES() constructs. However, it missed the case of
INSERT with a single-row VALUES, as reported by Timur Khanjanov.
Nosing around ruleutils.c, I found a second oversight: the
code for RowCompareExpr generates ROW() notation without benefit
of an actual RowExpr, and naturally it wasn't in sync :-(.
(The code for FieldStore also does this, but we don't expect that
to generate strictly parsable SQL anyway, so I left it alone.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/efaba6f9-4190-56be-8ff2-7a1674f9194f@intrans.baku.az
When building append paths, we've been looking only at startup and total
costs for the paths. When building fractional paths that may eliminate
the cheapest one, because it may be dominated by two separate paths (one
for startup, one for total cost).
This extends generate_orderedappend_paths() to also consider which paths
have lowest fractional cost. Currently we only consider paths matching
pathkeys - in the future this may be improved by also considering paths
that are only partially sorted, with an incremental sort on top.
Original report of an issue by Arne Roland, patch by me (based on a
suggestion by Tom Lane).
Reviewed-by: Arne Roland, Zhihong Yu
Discussion: https://postgr.es/m/e8f9ec90-546d-e948-acce-0525f3e92773%40enterprisedb.com
Discussion: https://postgr.es/m/1581042da8044e71ada2d6e3a51bf7bb%40index.de
Previously pg_log_backend_memory_contexts() could request to
log the memory contexts of backends, but not of auxiliary processes
such as checkpointer. This commit enhances the function so that
it can also send the request to auxiliary processes. It's useful to
look at the memory contexts of those processes for debugging purpose
and better understanding of the memory usage pattern of them.
Note that pg_log_backend_memory_contexts() cannot send the request
to logger or statistics collector. Because this logging request
mechanism is based on shared memory but those processes aren't
connected to that.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACU1nBzpacOK2q=a65S_4+Oaz_rLTsU1Ri0gf7YUmnmhfQ@mail.gmail.com
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
Tom Lane
Daniel Gustafsson
Fujii Masao
Noah Misch
Michael Paquier
Peter Eisentraut
Thomas Munro
Andres Freund
Andrew Dunstan
Robert Haas
Tomas Vondra