ANALYZE's total sample. The original coding is at risk of overflow for
statistics targets exceeding about 2675; this was not a problem before
8.4 but it is now. Per bug #4793 from Dennis Noordsij.
it fails because the shared memory segment already exists. This
means it can take up to 10 seconds before it reports the error
if it *does* exist, but hopefully it will make the system capable
of restarting even when the server is under high load.
to make sure that the error code is reset, as a precaution in
case the API doesn't properly reset it on success. This could
be necessary, since we check the error value even if the function
doesn't fail for specific success cases.
error message if the installation directory layout is messed up (or at least,
something more useful than the behavior exhibited in bug #4787). During
postmaster startup, check that get_pkglib_path resolves as a readable
directory; and if ParseTzFile() fails to open the expected timezone
abbreviation file, check the possibility that the directory is missing rather
than just the specified file. In case of either failure, issue a hint
suggesting that the installation is broken. These two checks cover the lib/
and share/ trees of a full installation, which should take care of most
scenarios where a sysadmin decides to get cute.
part that rounds up to exactly 1.0 second. The previous coding rejected input
like "00:12:57.9999999999999999999999999999", with the exact number of nines
needed to cause failure varying depending on float-timestamp option and
possibly on platform. Obviously this should round up to the next integral
second, if we don't have enough precision to distinguish the value from that.
Per bug #4789 from Robert Kruus.
In passing, fix a missed check for fractional seconds in one copy of the
"is it greater than 24:00:00" code.
Broken all the way back, so patch all the way back.
PlaceHolderVar nodes in join quals appearing in or below the lowest
outer join that could null the subquery being pulled up. This improves
the planner's ability to recognize constant join quals, and probably
helps with detection of common sort keys (equivalence classes) as well.
aggregate function. By definition, such a sub-SELECT cannot reference any
variables of query levels between itself and the aggregate's semantic level
(else the aggregate would've been assigned to that lower level instead).
So the correct, most efficient implementation is to treat the sub-SELECT as
being a sub-select of that outer query level, not the level the aggregate
syntactically appears in. Not doing so also confuses the heck out of our
parameter-passing logic, as illustrated in bug report from Daniel Grace.
Fortunately, we were already copying the whole Aggref expression up to the
outer query level, so all that's needed is to delay SS_process_sublinks
processing of the sub-SELECT until control returns to the outer level.
This has been broken since we introduced spec-compliant treatment of
outer aggregates in 7.4; so patch all the way back.
any negative or positive number, not just -1 or 1. Fix comment on
varstr_cmp and citext test case accordingly.
As pointed out by Zdenek Kotala, and buildfarm member gothic moth.
documentation warnings against setting it nonzero unless active use of
prepared transactions is intended and a suitable transaction manager has been
installed. This should help to prevent the type of scenario we've seen
several times now where a prepared transaction is forgotten and eventually
causes severe maintenance problems (or even anti-wraparound shutdown).
The only real reason we had the default be nonzero in the first place was to
support regression testing of the feature. To still be able to do that,
tweak pg_regress to force a nonzero value during "make check". Since we
cannot force a nonzero value in "make installcheck", add a variant regression
test "expected" file that shows the results that will be obtained when
max_prepared_transactions is zero.
Also, extend the HINT messages for transaction wraparound warnings to mention
the possibility that old prepared transactions are causing the problem.
All per today's discussion.
using the system functions all the time. (These files are now just copies
of the osf.* files.) The homebrew functions were not getting used anyway
on AIX versions that have dlopen(), that is 4.3 and up, so they are not
needed on any AIX that is even remotely supported by the vendor anymore.
We'd have probably left them here anyway, except some questions were
raised about the copyright.
fact that this is breaking the MSVC build, it's probably not really a good
idea to expand the dependencies of gram.h any further than the core parser;
for instance the value of SCONST might depend on which bison version you'd
built with. Better to expose an additional call point in parser.c, so
move what I had put into pl_funcs.c into parser.c. Also PGDLLIMPORT'ify
the reference to standard_conforming_strings, per buildfarm results.
Stefan Kaltenbrunner. The most reasonable behavior (at least for the near
term) seems to be to ignore the PlaceHolderVar and examine its argument
instead. In support of this, change the API of pull_var_clause() to allow
callers to request recursion into PlaceHolderVars. Currently
estimate_num_groups() is the only customer for that behavior, but where
there's one there may be others.
constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
select u&42 from table-with-a-u-column;
Also fix missing SET_YYLLOC() in the {dolqfailed} production that I suppose
this was based on. The latter is a pre-existing bug, but the only effect
is to misplace the error cursor by one token, so probably not worth
backpatching.
how this ought to behave for multi-dimensional arrays. Per discussion,
not having it at all seems better than having it with what might prove
to be the wrong behavior. We can always add it later when we have consensus
on the correct behavior.
already did that on Windows, but it's needed on other platforms too when
LC_CTYPE=C. With other locales, we enforce (or trust) that the codeset of
the locale matches the server encoding so we don't need to bind it
explicitly. It should do no harm in that case either, but I don't have
full faith in the PG encoding -> OS codeset mapping table yet. Per recent
discussion on pgsql-hackers.
the checkpoint in immediate or lazy mode. This is to address complaints
that pg_start_backup() takes a long time even when there's no need to minimize
its I/O consumption.
alias for array_length(v,1). The efficiency gain here is doubtless
negligible --- what I'm interested in is making sure that if we have
second thoughts about the definition, we will not have to force a
post-beta initdb to change the implementation.
of discovery, rather than reverse order. This doesn't matter functionally
(I suppose the previous coding dates from the time when lcons was markedly
cheaper than lappend). However now that EXPLAIN is labeling subplans with
IDs that are based on order of creation, this may help produce a slightly
less surprising printout.
are individually labeled, rather than just grouped under an "InitPlan"
or "SubPlan" heading. This in turn makes it possible for decompilation of
a subplan reference to usefully identify which subplan it's referencing.
I also made InitPlans identify which parameter symbol(s) they compute,
so that references to those parameters elsewhere in the plan tree can
be connected to the initplan that will be executed. Per a gripe from
Robert Haas about EXPLAIN output of a WITH query being inadequate,
plus some longstanding pet peeves of my own.
are using our own ports of getopt or getopt_long, those will define
the variable for themselves; and if not, we don't need these, because
we never touch the variable anyway.
of adding optional namespace and action fields to DefElem. Having three
node types that do essentially the same thing bloats the code and leads
to errors of confusion, such as in yesterday's bug report from Khee Chin.
when we are waiting for old snapshots to go away during a concurrent index
build. In particular, this rule lets us avoid waiting for
idle-in-transaction sessions.
This logic could be improved further if we had some way to wake up when
the session we are currently waiting for goes idle-in-transaction. However
that would be a significantly more complex/invasive patch, so it'll have to
wait for some other day.
Simon Riggs, with some improvements by Tom.
interval_eq() considers equal. I'm not sure how that fundamental requirement
escaped us through multiple revisions of this hash function, but there it is;
it's been wrong since interval_hash was first written for PG 7.1.
Per bug #4748 from Roman Kononov.
Backpatch to all supported releases.
This patch changes the contents of hash indexes for interval columns. That's
no particular problem for PG 8.4, since we've broken on-disk compatibility
of hash indexes already; but it will require a migration warning note in
the next minor releases of all existing branches: "if you have any hash
indexes on columns of type interval, REINDEX them after updating".
To implement this without almost duplicating the reloption table, treat
relopt_kind as a bitmask instead of an integer value. This decreases the
range of allowed values, but it's not clear that there's need for that much
values anyway.
This patch also makes heap_reloptions explicitly a no-op for relation kinds
other than heap and TOAST tables.
Patch by ITAGAKI Takahiro with minor edits from me. (In particular I removed
the bit about adding relation kind to an error message, which I intend to
commit separately.)
try to protect an already-existing buffer from being evicted. This was
left as an open issue when the posix_fadvise patch was committed. I'm
not sure there's any evidence to justify more work in this area, but we
should have some record about it in the source code.
for simple Var targetlist entries all the time, even when there are other
entries that are not simple Vars. Also, ensure that we prefetch attributes
(with slot_getsomeattrs) for all Vars in the targetlist, even those buried
within expressions. In combination these changes seem to significantly
reduce the runtime for cases where tlists are mostly but not exclusively
Vars. Per my proposal of yesterday.
conversion functions. This allows transaction rollback to revert to a
previous client_encoding setting without doing fresh catalog lookups.
I believe that this explains and fixes the recent report of "failed to commit
client_encoding" failures.
This bug is present in 8.3.x, but it doesn't seem prudent to back-patch
the fix, at least not till it's had some time for field testing in HEAD.
In passing, remove SetDefaultClientEncoding(), which was used nowhere.
we failed to assign, even in "can't happen" cases. Motivated by wondering
what's going on in a recent trouble report where "failed to commit" did
happen.
temp relations; this is no more expensive than before, now that we have
pg_class.relistemp. Insert tests into bufmgr.c to prevent attempting
to fetch pages from nonlocal temp relations. This provides a low-level
defense against bugs-of-omission allowing temp pages to be loaded into shared
buffers, as in the contrib/pgstattuple problem reported by Stuart Bishop.
While at it, tweak a bunch of places to use new relcache tests (instead of
expensive probes into pg_namespace) to detect local or nonlocal temp tables.
relations (including a temp table's indexes and toast table/index), and
false for normal relations. For ease of checking, this commit just adds
the column and fills it correctly --- revising the relation access machinery
to use it will come separately.
at the same instant as a new backend is spawned. Since CountActiveBackends()
doesn't hold ProcArrayLock, it needs to be prepared for the case that a
pointer at the end of the proc array is still NULL even though numProcs says
it should be valid, since it doesn't hold ProcArrayLock. Backpatch to 8.1.
8.0 and earlier had this right, but it was broken in the split of PGPROC and
sinval shared memory arrays.
Per report and proposal by Marko Kreen.
TupleTableSlots. We have functions for retrieving a minimal tuple from a slot
after storing a regular tuple in it, or vice versa; but these were implemented
by converting the internal storage from one format to the other. The problem
with that is it invalidates any pass-by-reference Datums that were already
fetched from the slot, since they'll be pointing into the just-freed version
of the tuple. The known problem cases involve fetching both a whole-row
variable and a pass-by-reference value from a slot that is fed from a
tuplestore or tuplesort object. The added regression tests illustrate some
simple cases, but there may be other failure scenarios traceable to the same
bug. Note that the added tests probably only fail on unpatched code if it's
built with --enable-cassert; otherwise the bug leads to fetching from freed
memory, which will not have been overwritten without additional conditions.
Fix by allowing a slot to contain both formats simultaneously; which turns out
not to complicate the logic much at all, if anything it seems less contorted
than before.
Back-patch to 8.2, where minimal tuples were introduced.
mode while callers hold pointers to in-memory tuples. I reported this for
the case of nodeWindowAgg's primary scan tuple, but inspection of the code
shows that all of the calls in nodeWindowAgg and nodeCtescan are at risk.
For the moment, fix it with a rather brute-force approach of copying
whenever one of the at-risk callers requests a tuple. Later we might
think of some sort of reference-count approach to reduce tuple copying.
In the backend, I changed only a handful of exemplary or important-looking
instances to make use of the plural support; there is probably more work
there. For the rest of the source, this should cover all relevant cases.
"physical tlist" optimization on the outer relation (ie, force a projection
step to occur in its scan). This avoids storing useless column values when
the outer relation's tuples are written to temporary batch files.
Modified version of a patch by Michael Henderson and Ramon Lawrence.
method to pass extra data to the consistent() and comparePartial() methods.
This is the core infrastructure needed to support the soon-to-appear
contrib/btree_gin module. The APIs are still upward compatible with the
definitions used in 8.3 and before, although *not* with the previous 8.4devel
function definitions.
catversion bump for changes in pg_proc entries (although these are just
cosmetic, since GIN doesn't actually look at the function signature before
calling it...)
Teodor Sigaev and Oleg Bartunov
them from degrading badly when the input is sorted or nearly so. In this
scenario the tree is unbalanced to the point of becoming a mere linked list,
so insertions become O(N^2). The easiest and most safely back-patchable
solution is to stop growing the tree sooner, ie limit the growth of N. We
might later consider a rebalancing tree algorithm, but it's not clear that
the benefit would be worth the cost and complexity. Per report from Sergey
Burladyan and an earlier complaint from Heikki.
Back-patch to 8.2; older versions didn't have GIN indexes.
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
probes --- the BUFFER_READ_DONE probe provides the same information and more
besides. Expand the LOCK_WAIT_START/DONE probe arguments so that there's
actually some chance of telling what is being waited for. Update and
clean up the documentation.
DTrace probes, so that ordinary reads can be distinguished from relation
extension operations. Move buffer_read_start probe to before the
smgrnblocks() call that's needed in the isExtend case, since really that step
should be charged as part of the time needed for the extension operation.
(This makes it slightly harder to match the read_start with the associated
read_done, since now you can't match them on blockNumber, but it should still
be possible since isExtend operations on the same relation can never be
interleaved.) Per recent discussion.
In passing, add the page identity (forkNum/blockNum) to the parameters of the
buffer_flush_start/buffer_flush_done probes, which were unaccountably lacking
the info.
noise words for the last twelve years, for compatibility with Berkeley-era
output formatting of the special INVALID values for those datatypes.
Considering that the datatypes themselves have been deprecated for awhile,
this is taking backwards compatibility a little far. Per gripe from Josh
Berkus.
distribution, by creating a special fast path for the (first few) most common
values of the outer relation. Tuples having hashvalues matching the MCVs
are effectively forced to be in the first batch, so that we never write
them out to the batch temp files.
Bryce Cutt and Ramon Lawrence, with some editorialization by me.
the cause of the "could not write to log file: Bad file descriptor"
errors reported at
http://archives.postgresql.org//pgsql-general/2008-06/msg00193.php
Backpatch to 8.3, the race condition was introduced by the CSV logging
patch.
Analysis and patch by Gurjeet Singh.
to date, as per bug #4702 and subsequent discussion. In particular, make it
work for years specified using AD/BC or CC fields, and fix the test for "no
year specified" so that it doesn't trigger inappropriately for 1 BC (which it
was doing even in code paths that had nothing to do with to_timestamp). I
also did some minor code beautification in the non-ISO-day-number code path.
This area has been busted all along, but because the code has been rewritten
repeatedly, it would be considerable trouble to back-patch. It's such a
corner case that it doesn't seem worth the effort.
make it include the time for the possible smgropen() call, but that
results in a null pointer dereference :-(.
An alternative solution would be to fetch the buffer tag instead of
looking at *reln, but I'll just put it back as it was for the moment.
BTW, this indicates that DTrace probes evaluate their arguments even
when nominally inactive. What was that about "zero cost", again?
format codes are misapplied to a numeric argument. (The code still produces
a pretty bogus error message in such cases, but I'll settle for stopping the
crash for now.) Per bug #4700 from Sergey Burladyan.
Problem exists in all supported branches, so patch all the way back.
In HEAD, also clean up some ugly coding in the nearby cache management
code.
some bufmgr probes, take out redundant and memory-leak-inducing path arguments
to smgr__md__read__done and smgr__md__write__done, fix bogus attempt to
recalculate space used in sort__done, clean up formatting in places where
I'm not sure pgindent will do a nice job by itself.
are not an alphabetic character although they are not word-breakers too.
So, treat them as part of word.
Per off-list discussion with Dibyendra Hyoju <dibyendra@gmail.com> and
and Bal Krishna Bal <balkrishna7bal@gmail.com> about Nepali language and
Devanagari alphabet.
exact-match pattern (no wildcard) can be index-optimized in some cases where a
prefix-match pattern cannot; specifically, since the required index clause is
simple equality, it works for regular text/varchar indexes even when the
locale is not C. I'm not sure how often this case really comes up, but since
it requires hardly any additional work to handle it, we might as well get it
right. Motivated by a discussion on the JDBC list.
for consistency with the (relatively) recent addition of typmod to SubLink.
An example of why it's a good idea is to be seen in the recent "failed to
locate grouping columns" bug, which wouldn't have happened if a SubPlan
exposed the same typmod info as the SubLink it was derived from.
This could be back-patched, since it doesn't affect any on-disk data format,
but for the moment it doesn't seem necessary to do so.
by the planning process. This prevents the "failed to locate grouping columns"
error recently reported by Dickson Guedes. That happens because planning
replaces SubLinks by SubPlans in the subquery's targetlist, and exprTypmod()
is smarter about the former than the latter, causing the apparent type of
the subquery's output columns to change. This seems to be a deficiency we
should fix in exprTypmod(), but that will be a much more invasive patch
with possible side-effects elsewhere, so I'll do that only in HEAD.
Back-patch to 8.3. Arguably the lack of a copying step is broken/dangerous
all the way back, but in the absence of known problems I'll refrain from
making the older branches pay the extra cost. (The reason this particular
symptom didn't appear before is that exprTypmod() wasn't smart about SubLinks
either, until 8.3.)
kwlist.h, to avoid having to link the backend object file into other programs
like pg_dump. We can now simply symlink a single source file from the backend
(kwlookup.c, containing the shared routine ScanKeywordLookup) and compile it
locally, which is a lot cleaner.
amgettuple or only implement amgetbitmap, instead of the former assumption
that every AM supports both APIs. Extracted with minor editorialization
from Teodor's fast-GIN-insert patch; whatever becomes of that, this seems
like a simple and reasonable generalization of the index AM interface spec.
attribute numbering. Also, a parent whole-row reference should not require
select privilege on child columns that aren't inherited from the parent.
Problem diagnosed by KaiGai Kohei, though this isn't exactly his patch.
fail to provide the function itself. Not sure how we escaped testing anything
later than 7.3 on such cases, but they still exist, as per André Volpato's
report about AIX 5.3.
composite, enum and array types, as those are surely not binary-compatible
with anything else because of the embedded OIDs.
Inspired by bug report by Oleg Serov.
recovery: if background writer or pgstat process dies during recovery (or
any other child process, but those two are the only ones running), send
SIGQUIT to the startup process using correct pid.
encoding conversion of any elog/ereport message being sent to the frontend.
This generalizes a patch that I put in last October, which suppressed
translation of only specific messages known to be associated with recursive
can't-translate-the-message behavior. As shown in bug #4680, we need a more
general answer in order to have some hope of coping with broken encoding
conversion setups. This approach seems a good deal less klugy anyway.
Patch in all supported branches.
- pg_wchar and wchar_t could have different size, so char2wchar
doesn't call pg_mb2wchar_with_len to prevent out-of-bound
memory bug
- make char2wchar/wchar2char symmetric, now they should not be
called with C-locale because mbstowcs/wcstombs oftenly doesn't
work correct with C-locale.
- Text parser uses pg_mb2wchar_with_len directly in case of
C-locale and multibyte encoding
Per bug report by Hiroshi Inoue <inoue@tpf.co.jp> and
following discussion.
Backpatch up to 8.2 when multybyte support was implemented in tsearch.
fail on zero-length inputs. This isn't an issue in normal use because the
conversion infrastructure skips calling the converters for empty strings.
However a problem was created by yesterday's patch to check whether the
right conversion function is supplied in CREATE CONVERSION. The most
future-proof fix seems to be to make the converters safe for this corner case.
input lists before we grovel through the lists. This doesn't save much,
but testing shows that the case of both inputs NIL is common enough that
it saves something. And this is used enough to be a hotspot.
to 100ms (from 1000). This still seems to be comfortably larger than the
useful range of the parameter, and it should help discourage people from
picking uselessly large values. Tweak the documentation to recommend small
values, too. Per discussion of a couple weeks ago.
the ON clause of an outer join. Doing so is semantically correct but results
in de-optimizing queries that were structured to take advantage of the sublink
style of execution, as seen in recent complaint from Kevin Grittner. Since
the user can get the other behavior by reorganizing his query, having the
flattening happen automatically is just a convenience, and that doesn't
justify breaking existing applications. Eventually it would be nice to
re-enable this, but that seems to require a significantly different approach
to outer joins in the executor.
function for the specified source and destination encodings. We do that by
calling the function with an empty string. If it can't perform the requested
conversion, it will throw an error.
Backport to 7.4 - 8.3. Per bug report #4680 by Denis Afonin.
to be syntactically part of a semijoin clause. For example given
WHERE EXISTS(SELECT ... WHERE upper.var = lower.var AND some-condition)
where some-condition is just a restriction on the lower relation, we can
use unique-ification on lower.var after having applied some-condition within
the scan on lower.
looks for a CaseTestExpr to figure out what the parser did, but it failed to
consider the possibility that an implicit coercion might be inserted above
the CaseTestExpr. This could result in an Assert failure in some cases
(but correct results if Asserts weren't enabled), or an "unexpected CASE WHEN
clause" error in other cases. Per report from Alan Li.
Back-patch to 8.1; problem doesn't exist before that because CASE was
implemented differently.
making pull_up_sublinks() construct a full-blown JoinExpr tree representation
of IN/EXISTS SubLinks that it is able to convert to semi or anti joins.
This makes pull_up_sublinks() a shade more complex, but the gain in semantic
clarity is worth it. I still have more to do in this area to address the
previously-discussed problems, but this commit in itself fixes at least one
bug in HEAD, as shown by added regression test case.
wrappers (similar to procedural languages). This way we don't need to retain
the nearly empty libraries, and we are more free in how to implement the
wrapper API in the future.
TABLE: if the command is executed by someone other than the table owner (eg,
a superuser) and the table has a toast table, the toast table's pg_type row
ends up with the wrong typowner, ie, the command issuer not the table owner.
This is quite harmless for most purposes, since no interesting permissions
checks consult the pg_type row. However, it could lead to unexpected failures
if one later tries to drop the role that issued the command (in 8.1 or 8.2),
or strange warnings from pg_dump afterwards (in 8.3 and up, which will allow
the DROP ROLE because we don't create a "redundant" owner dependency for table
rowtypes). Problem identified by Cott Lang.
Back-patch to 8.1. The problem is actually far older --- the CLUSTER variant
can be demonstrated in 7.0 --- but it's mostly cosmetic before 8.1 because we
didn't track ownership dependencies before 8.1. Also, fixing it before 8.1
would require changing the call signature of heap_create_with_catalog(), which
seems to carry a nontrivial risk of breaking add-on modules.
IS NULL condition is rendered redundant by detection of an antijoin.
If we know that a join is an antijoin, then *any* Var coming out of its
righthand side must be NULL, not only the joining column(s). Also,
it's still gonna be null after being passed up through higher joins,
whether they're outer joins or not. I was misled by a faulty analogy
to reduce_outer_joins() in the original coding. But consider
select * from a left join b on a.x = b.y where b.y is null and b.z is null;
The first IS NULL condition justifies deciding that the join is an antijoin
(if the = is strict) and then the second one is just plain redundant.
unary minus operators. We weren't attempting to prevent minus zero anywhere
else; in view of our gradual trend to make the float datatypes more IEEE
standard compliant, we should allow minus zero here rather than disallow it
elsewhere.
We don't, however, expect that all platforms will produce minus zero, so
we need to adjust the one affected regression test to allow both results.
Per discussion of bug #4660.
(In passing, clean up a couple other minor infelicities in float.c.)
its usual buffer cleaning duties during archive recovery, and it's responsible
for performing restartpoints.
This requires some changes in postmaster. When the startup process has done
all the initialization and is ready to start WAL redo, it signals the
postmaster to launch the background writer. The postmaster is signaled again
when the point in recovery is reached where we know that the database is in
consistent state. Postmaster isn't interested in that at the moment, but
that's the point where we could let other backends in to perform read-only
queries. The postmaster is signaled third time when the recovery has ended,
so that postmaster knows that it's safe to start accepting connections.
The startup process now traps SIGTERM, and performs a "clean" shutdown. If
you do a fast shutdown during recovery, a shutdown restartpoint is performed,
like a shutdown checkpoint, and postmaster kills the processes cleanly. You
still have to continue the recovery at next startup, though.
Currently, the background writer is only launched during archive recovery.
We could launch it during crash recovery as well, but it seems better to keep
that codepath as simple as possible, for the sake of robustness. And it
couldn't do any restartpoints during crash recovery anyway, so it wouldn't be
that useful.
log_restartpoints is gone. Use log_checkpoints instead. This is yet to be
documented.
This whole operation is a pre-requisite for Hot Standby, but has some value of
its own whether the hot standby patch makes 8.4 or not.
Simon Riggs, with lots of modifications by me.
unique for a particular query, if the index predicate is satisfied. This
requires a bit of reordering of operations so that we check the predicates
before doing any selectivity estimates, but shouldn't really cause any
noticeable slowdown. Per a comment from Michal Politowski.
replace the old recursive-SQL-function implementation of _pg_keysequal()
with use of the built-in array containment operators, and change
table_constraints' UNION to UNION ALL. Per discussion with Octavio Alvarez.
initdb not forced since this doesn't affect results, but you'd need to
initdb or reload the information_schema to see the new definitions.
any LISTEN command. This is more important than it used to be because
DISCARD ALL invokes UNLISTEN. Connection-pooled applications making heavy
use of DISCARD ALL were seeing significant contention for pg_listener,
as reported by Matteo Beccati. It seems unlikely that clients using LISTEN
would use pooled connections, so this simple tweak seems sufficient,
especially since the pg_listener implementation is slated to go away soon
anyway.
Back-patch to 8.3, where DISCARD ALL was introduced.
get rid of the OID column. This eliminates the problem discovered by Heikki
back in November that 8.4's suppression of "unnecessary" junk filtering in
INSERT/SELECT could lead to an Assert failure, or storing of oids into a table
that shouldn't have them if Asserts are off. While that particular problem
could have been solved in other ways, it seems likely to be just a forerunner
of things to come if we continue to allow tables to contain rows that disagree
with the pg_class.relhasoids setting. It's better to make this operation slow
than to sacrifice performance or risk bugs in more common code paths.
Also, add ALTER TABLE SET WITH OIDS to rewrite the table to add oids.
This was a bit more controversial, but in view of the very small amount of
extra code needed given the current ALTER TABLE infrastructure, it seems best
to eliminate the asymmetry in features.
Tom Lane
Peter Eisentraut
Magnus Hagander
Alvaro Herrera
Tatsuo Ishii
Heikki Linnakangas
Bruce Momjian
Teodor Sigaev
Andrew Dunstan