pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
protocol, per report from Igor Shevchenko. NOTIFY thought it could
do its thing if transaction blockState is TBLOCK_DEFAULT, but in
reality it had better check the low-level transaction state is
TRANS_DEFAULT as well. Formerly it was not possible to wait for the
client in a state where the first is true and the second is not ...
but now we can have such a state. Minor cleanup in StartTransaction()
as well.
post-abort cleanup hooks. I'm surprised that we have not needed this
already, but I need it now to fix a plpgsql problem, and the usefulness
for other dynamically loaded modules seems obvious.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
-hackers a couple days ago.
Notes/caveats:
- added regression tests for the new functionality, all
regression tests pass on my machine
- added pg_dump support
- updated PL/PgSQL to support per-statement triggers; didn't
look at the other procedural languages.
- there's (even) more code duplication in trigger.c than there
was previously. Any suggestions on how to refactor the
ExecXXXTriggers() functions to reuse more code would be
welcome -- I took a brief look at it, but couldn't see an
easy way to do it (there are several subtly-different
versions of the code in question)
- updated the documentation. I also took the liberty of
removing a big chunk of duplicated syntax documentation in
the Programmer's Guide on triggers, and moving that
information to the CREATE TRIGGER reference page.
- I also included some spelling fixes and similar small
cleanups I noticed while making the changes. If you'd like
me to split those into a separate patch, let me know.
Neil Conway
before commit, not after :-( --- the original coding is not only unsafe
if an error occurs while it's processing, but it generates an invalid
sequence of WAL entries. Resurrect 7.2 logic for deleting items when
no longer needed. Use an enum instead of random macros. Editorialize
on names used for routines and constants. Teach backend/nodes routines
about new field in CreateTable struct. Add a regression test.
principled order; in particular ensure that all shared resources
are released before we release transaction locks. The code used
to release locks before buffer pins, which might explain an ancient
note I have about a bufmgr assertion failure I'd seen once several
years ago, and been unable to reproduce since. (Theory: someone
trying to drop a relation might be able to reach FlushRelationBuffers
before the last user of the relation had gotten around to dropping
his buffer pins.)
to false provides more SQL-spec-compliant behavior than we had before.
I am not sure that setting it false is actually a good idea yet; there
is a lot of client-side code that will probably be broken by turning
autocommit off. But it's a start.
Loosely based on a patch by David Van Wie.
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
in the relcache. It's rather silly that we have reference count leak
checks in bufmgr and in catcache, but not in relcache which will normally
have many fewer entries. Chris K-L would have caught at least one bug
in his recent DROP patch if he'd had this.
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
exemplified by bug #671. Moving the storage to relcache turned out to
be a bad idea because relcache might decide to discard the info. Instead,
open and close the relcache entry on each sequence operation, and use
a record of the current XID to discover whether we already hold
AccessShareLock on the sequence.
in snapshots, per my proposal of a few days ago. Also, tweak heapam.c
routines (heap_insert, heap_update, heap_delete, heap_mark4update) to
be passed the command ID to use, instead of doing GetCurrentCommandID.
For catalog updates they'll still get passed current command ID, but
for updates generated from the main executor they'll get passed the
command ID saved in the snapshot the query is using. This should fix
some corner cases associated with functions and triggers that advance
current command ID while an outer query is still in progress.
allows the example in the CREATE SCHEMA ref page to actually work now.
Also, clean up when the transaction that initially creates a temp-table
namespace is later aborted. Simplify internal representation of search
path by folding special cases into the main list.
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
path. The default behavior if no per-user schemas are created is that
all users share a 'public' namespace, thus providing behavior backwards
compatible with 7.2 and earlier releases. Probably the semantics and
default setting will need to be fine-tuned, but this is a start.
per recent pghackers discussion: force a new WAL record at first nextval
after a checkpoint, and ensure that xlog is flushed to disk if a nextval
record is the only thing emitted by a transaction.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
Modified the parser and the SET handlers to use full Node structures
rather than simply a character string argument.
Implement INTERVAL() YEAR TO MONTH (etc) syntax per SQL99.
Does not yet accept the goofy string format that goes along with, but
this should be fairly straight forward to fix now as a bug or later
as a feature.
Implement precision for the INTERVAL() type.
Use the typmod mechanism for both of INTERVAL features.
Fix the INTERVAL syntax in the parser:
opt_interval was in the wrong place.
INTERVAL is now a reserved word, otherwise we get reduce/reduce errors.
Implement an explicit date_part() function for TIMETZ.
Should fix coersion problem with INTERVAL reported by Peter E.
Fix up some error messages for date/time types.
Use all caps for type names within message.
Fix recently introduced side-effect bug disabling 'epoch' as a recognized
field for date_part() etc. Reported by Peter E. (??)
Bump catalog version number.
Rename "microseconds" current transaction time field
from ...Msec to ...Usec. Duh!
date/time regression tests updated for reference platform, but a few
changes will be necessary for others.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
Define a new function, GetCurrentTransactionStartTimeUsec() to get the time
to this precision.
Allow now() and timestamp 'now' to use this higher precision result so
we now have fractional seconds in this "constant".
Add timestamp without time zone type.
Move previous timestamp type to timestamp with time zone.
Accept another ISO variant for date/time values: yyyy-mm-ddThh:mm:ss
(note the "T" separating the day from hours information).
Remove 'current' from date/time types; convert to 'now' in input.
Separate time and timetz regression tests.
Separate timestamp and timestamptz regression test.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
in GetSnapshotData, GetNewTransactionId, CommitTransaction, AbortTransaction,
etc. Correct race condition in transaction status testing in
HeapTupleSatisfiesVacuum --- this wasn't important for old VACUUM with
exclusive lock on its table, but it sure is important now. All per
pghackers discussion 7/11/01 and 7/12/01.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
SI messages now include the relevant database OID, so that operations
in one database do not cause useless cache flushes in backends attached
to other databases. Declare SI messages properly using a union, to
eliminate the former assumption that Oid is the same size as int or Index.
Rewrite the nearly-unreadable code in inval.c, and document it better.
Arrange for catcache flushes at end of command/transaction to happen before
relcache flushes do --- this avoids loading a new tuple into the catcache
while setting up new relcache entry, only to have it be flushed again
immediately.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
are now critical sections, so as to ensure die() won't interrupt us while
we are munging shared-memory data structures. Avoid insecure intermediate
states in some code that proc_exit will call, like palloc/pfree. Rename
START/END_CRIT_CODE to START/END_CRIT_SECTION, since that seems to be
what people tend to call them anyway, and make them be called with () like
a function call, in hopes of not confusing pg_indent.
I doubt that this is sufficient to make SIGTERM safe anywhere; there's
just too much code that could get invoked during proc_exit().
level" locks. A session lock is not released at transaction commit (but it
is released on transaction abort, to ensure recovery after an elog(ERROR)).
In VACUUM, use a session lock to protect the master table while vacuuming a
TOAST table, so that the TOAST table can be done in an independent
transaction.
I also took this opportunity to do some cleanup and renaming in the lock
code. The previously noted bug in ProcLockWakeup, that it couldn't wake up
any waiters beyond the first non-wakeable waiter, is now fixed. Also found
a previously unknown bug of the same kind (failure to scan all members of
a lock queue in some cases) in DeadLockCheck. This might have led to failure
to detect a deadlock condition, resulting in indefinite waits, but it's
difficult to characterize the conditions required to trigger a failure.
to ensure that we have released buffer refcounts and so forth, rather than
putting ad-hoc operations before (some of the calls to) proc_exit. Add
commentary to discourage future hackers from repeating that mistake.
maintained for each cache entry. A cache entry will not be freed until
the matching ReleaseSysCache call has been executed. This eliminates
worries about cache entries getting dropped while still in use. See
my posting to pg-hackers of even date for more info.
message about recursive use of a syscache. Also remove most of the
specialized indexscan routines in indexing.c --- it turns out that
catcache.c is perfectly able to perform the indexscan for itself,
in fact has already looked up all the information needed to do so!
This should be faster as well as needing far less boilerplate code.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
'AbortTransaction and not in in-progress state' when client disconnects
just after an error. Notice seems pretty harmless, so I'm not going
to worry about back-patching this into 7.0.* ...
from bufmgr - it would be nice to have separate hash in smgr
for node <--> fd mappings, but for the moment it's easy to
add new hash to relcache.
Fixed small bug in xlog.c:ReadRecord.
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
materialized tupleset is small enough) instead of a temporary relation.
This was something I was thinking of doing anyway for performance, and Jan
says he needs it for TOAST because he doesn't want to cope with toasting
noname relations. With this change, the 'noname table' support in heap.c
is dead code, and I have accordingly removed it. Also clean up 'noname'
plan handling in planner --- nonames are either sort or materialize plans,
and it seems less confusing to handle them separately under those names.
as a shared dirtybit for each shared buffer. The shared dirtybit still
controls writing the buffer, but the local bit controls whether we need
to fsync the buffer's file. This arrangement fixes a bug that allowed
some required fsyncs to be missed, and should improve performance as well.
For more info see my post of same date on pghackers.
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
Initdb help correction
Changed end/abort to commit/rollback and changed related notices
Commented out way old printing functions in libpq
Fixed a typo in alter table / alter column
Implements the CREATE CONSTRAINT TRIGGER and SET CONSTRAINTS commands.
TODO:
Generic builtin trigger procedures
Automatic execution of appropriate CREATE CONSTRAINT... at CREATE TABLE
Support of new trigger type in pg_dump
Swapping of huge # of events to disk
Jan
* Buffer refcount cleanup (per my "progress report" to pghackers, 9/22).
* Add links to backend PROC structs to sinval's array of per-backend info,
and use these links for routines that need to check the state of all
backends (rather than the slow, complicated search of the ShmemIndex
hashtable that was used before). Add databaseOID to PROC structs.
* Use this to implement an interlock that prevents DESTROY DATABASE of
a database containing running backends. (It's a little tricky to prevent
a concurrently-starting backend from getting in there, since the new
backend is not able to lock anything at the time it tries to look up
its database in pg_database. My solution is to recheck that the DB is
OK at the end of InitPostgres. It may not be a 100% solution, but it's
a lot better than no interlock at all...)
* In ALTER TABLE RENAME, flush buffers for the relation before doing the
rename of the physical files, to ensure we don't get failures later from
mdblindwrt().
* Update TRUNCATE patch so that it actually compiles against current
sources :-(.
You should do "make clean all" after pulling these changes.
See attached mail for more details.
-------------------------------------------------------------------
From: "Vadim Mikheev" <vadim@krs.ru>
To: "Hiroshi Inoue" <Inoue@tpf.co.jp>
References: <000201befa94$42fe04c0$2801007e@cadzone.tpf.co.jp>
Subject: Re: elog(ERROR) in vacuum
Date: Fri, 10 Sep 1999 10:27:10 +0900
Organization: OJSC Rostelecom (Krasnoyarsk)
Message-ID: <37D85E6E.5AFA126D@krs.ru>
Hiroshi Inoue wrote:
>
> Hello Vadim,
>
> I have a question about vacuum.
>
> VACUUM has a phase like commit which calls TransactionIdCommit().
> But if elog(ERROR) occured after that,the status of transaction is
> changed from XID_COMMIT to XID_ABORT.
>
> Seems to me this causes inconsistency.
> Shoudn't AbortTransaction() be changed not to call TransacionIdAbort()
> in case of vacuum.
You're right!
As usual -:)
Vadim
transaction abort --- before it only worked if there was exactly one level
of allocation context stacked in the blank portal. Now it does the right
thing for any depth, including zero...
has positive refcount, it is rebuilt from pg_class data. This ensures
that relcache entries will track changes made by other backends. Formerly,
a shared inval report would just be ignored if it happened to arrive while
the relcache entry was in use. Also, fix relcache to reset ref counts
to zero during transaction abort. Finally, change LockRelation() so that
it checks for shared inval reports after obtaining the lock. In this way,
once any kind of lock has been obtained on a rel, we can trust the relcache
entry to be up-to-date.
Also, move responsibility for calling vc_abort into main xact.c list of
things-to-call-at-abort. What in the world was it doing down inside of
TransactionIdAbort()?
and possibly for other cases too:
DO NOT cache status of transaction in unknown state
(i.e. non-committed and non-aborted ones)
Example:
T1 reads row updated/inserted by running T2 and cache T2 status.
T2 commits.
Now T1 reads a row updated by T2 and with HEAP_XMAX_COMMITTED
in t_infomask (so cached T2 status is not changed).
Now T1 EvalPlanQual gets updated row version without HEAP_XMIN_COMMITTED
-> TransactionIdDidCommit(t_xmin) and TransactionIdDidAbort(t_xmin)
return FALSE and T2 decides that t_xmin is not committed and gets
ERROR above.
It's too late to find more smart way to handle such cases and so
I just changed xact status caching and got rid TransactionIdFlushCache()
from code.
Changed: transam.c, xact.c, lmgr.c and transam.h - last three
just because of TransactionIdFlushCache() is removed.
2. heapam.c:
T1 marked a row for update. T2 waits for T1 commit/abort.
T1 commits. T3 updates the row before T2 locks row page.
Now T2 sees that new row t_xmax is different from xact id (T1)
T2 was waiting for. Old code did Assert here. New one goes to
HeapTupleSatisfiesUpdate. Obvious changes too.
3. Added Assert to vacuum.c
4. bufmgr.c: break
Assert(buf->r_locks == 0 && !buf->ri_lock)
into two Asserts.
2. varsup.c:ReadNewTransactionId(): don't read nextXid from disk -
this func doesn't allocate next xid, so ShmemVariableCache->nextXid
may be used (but GetNewTransactionId() must be called first).
3. vacuum.c: change elog(ERROR, "Child item....") to elog(NOTICE) -
this is not ERROR, proper handling is just not implemented, yet.
4. s_lock.c: increase S_MAX_BUSY by 2 times.
5. shmem.c:GetSnapshotData(): have to call ReadNewTransactionId()
_after_ SpinAcquire(ShmemIndexLock).
transactions will not assume that MyProc transaction was committed
before snapshot calculations. With old MyProc->xid assignment
(in xact.c:StartTransaction()) there was ability to see the same
row twice (I used gdb for this)!...
2. Assignments of InvalidTransactionId to MyProc->xid and MyProc->xmin
are moved from xact.c:CommitTransaction() to
xact.c:RecordTransactionCommit() - this invalidation must be done
before releasing transaction locks or bad (too high) XmaxRecent value
might be used by vacuum ("ERROR: Child itemid marked as unused"
reported by "Hiroshi Inoue" <Inoue@tpf.co.jp>; once again, gdb
allowed me reproduce this error).
files to be closed automatically at transaction abort or commit, should
they still be open. Also close any still-open stdio files allocated with
AllocateFile at abort/commit. This should eliminate problems with leakage
of file descriptors after an error. Also, put in some primitive buffered-IO
support so that psort.c can use virtual files without severe performance
penalties.
2. Much faster btree tuples deletion in the case when first on page
index tuple is deleted (no movement to the left page(s)).
3. Remember blkno of new root page in BTPageOpaque of
left/right siblings when root page is splitted.
calls. Outside a transaction, the backend detects them as buffer
leaks; it sends a NOTICE, and frees them. This sometimes cause a
segmentation fault (at least on Linux). These indexes are initialized
on the first lo_read/lo_write/lo_tell call, and (normally) closed
on a lo_close call. Thus the buffer leaks appear when lo direct
access functions are used, and not with lo_import/lo_export functions
(libpq version calls lo_close before ending the command, and the
backend version uses another path).
The included patches (against recent snapshot, and against 6.3.2)
cause indexes to be closed on transaction end (that is on explicit
'END' statment, or on command termination outside trasaction blocks),
thus preventing the buffer leaks while increasing performance inside
transactions. Some (all?) 'classic' memory leaks are also removed.
I hope it will be ok.
--- Pascal ANDRE, graduated from Ecole Centrale Paris andre@via.ecp.fr
Neil Conway
Joe Conway
PostgreSQL Daemon
Tom Lane
Peter Eisentraut
Bruce Momjian
Jan Wieck
Thomas G. Lockhart
Vadim B. Mikheev
Hiroshi Inoue
Tatsuo Ishii