An outer join clause that didn't actually reference the RHS (perhaps only
after constant-folding) could confuse the join order enforcement logic,
leading to wrong query results. Also, nested occurrences of such things
could trigger an Assertion that on reflection seems incorrect.
Per fuzz testing by Andreas Seltenreich. The practical use of such cases
seems thin enough that it's not too surprising we've not heard field
reports about it.
This has been broken for a long time, so back-patch to all active branches.
Per complaint from Peter Holzer. It's useful to cover this special case,
since for a boolean variable "foo", earlier parts of the planner will have
reduced variants like "foo = true" to just "foo", and thus we may fail
to recognize the applicability of a partial index with predicate
"foo IS NOT NULL".
Back-patch to 9.5, but not further; given the lack of previous complaints
this doesn't seem like behavior to change in stable branches.
In many cases, we can implement a semijoin as a plain innerjoin by first
passing the righthand-side relation through a unique-ification step.
However, one of the cases where this does NOT work is where the RHS has
a LATERAL reference to the LHS; that makes the RHS dependent on the LHS
so that unique-ification is meaningless. joinpath.c understood this,
and so would not generate any join paths of this kind ... but join_is_legal
neglected to check for the case, so it would think that we could do it.
The upshot would be a "could not devise a query plan for the given query"
failure once we had failed to generate any join paths at all for the bogus
join pair.
Back-patch to 9.3 where LATERAL was added.
The PGXS-case directory does not exist in the non-PGXS case, and vice
versa. Add one or the other, not both. This is essentially cosmetic.
It makes Makefile.win32 more like the similar Makefile.global code.
Responsibility was formerly split between Makefile.global and pgxs.mk.
As a result of commit b58233c71b, in the
PGXS case, these variables were unset while parsing Makefile.global and
callees. Inclusion of Makefile.custom did not work from PGXS, and the
subtle difference seemed like a recipe for future bugs. Back-patch to
9.4, where that commit first appeared.
They are marked stable, but since they act on instantaneous state and it
is possible to consult state of transactions as they commit, the results
could change mid-query. They need to be marked volatile, and this
commit does so.
There would normally be a catversion bump here, but this is so much a
niche feature and I don't believe there's real damage from the incorrect
marking, that I refrained.
Backpatch to 9.5, where commit timestamps where introduced.
Per note from Fujii Masao.
The code was assuming that any NULL value in scan keys was due to IS
NULL or IS NOT NULL, but it turns out to be possible to get them with
other operators too, if they are used in contrived-enough ways. Easiest
way out of the problem seems to check explicitely for the IS NOT NULL
flag, instead of assuming it must be set if the IS NULL flag is not set,
when a null scan key is found; if neither flag is set, follow the lead
of other index AMs and assume that all indexable operators must be
strict, and thus the query is never satisfiable.
Also, add a comment to try and lure some future hacker into improving
analysis of scan keys in brin.
Per report from Andreas Seltenreich; diagnosis by Tom Lane.
Backpatch to 9.5.
Discussion: http://www.postgresql.org/message-id/20646.1437919632@sss.pgh.pa.us
When retrieving policies, if not working on the root target relation,
we actually want the relation's SELECT policies, regardless of
the top level query command type. For example in UPDATE t1...FROM t2
we need to apply t1's UPDATE policies and t2's SELECT policies.
Previously top level query command type was applied to all relations,
which was wrong. Add some regression coverage to ensure we don't
violate this principle in the future.
Report and patch by Dean Rasheed. Cherry picked from larger refactoring
patch and tweaked by me. Back-patched to 9.5 where RLS was introduced.
Although I think on all modern machines floating division by zero
results in Infinity not SIGFPE, we still don't want infinities
running around in the planner's costing estimates; too much risk
of that leading to insane behavior.
grouping_planner() failed to consider the possibility that final_rel
might be known dummy and hence have zero rowcount. (I wonder if it
would be better to set a rows estimate of 1 for dummy relations?
But at least in the back branches, changing this convention seems
like a bad idea, so I'll leave that for another day.)
Make certain that get_variable_numdistinct() produces a nonzero result.
The case that can be shown to be broken is with stadistinct < 0.0 and
small ntuples; we did not prevent the result from rounding to zero.
For good luck I applied clamp_row_est() to all the nonconstant return
values.
In ExecChooseHashTableSize(), Assert that we compute positive nbuckets
and nbatch. I know of no reason to think this isn't the case, but it
seems like a good safety check.
Per reports from Piotr Stefaniak. Back-patch to all active branches.
When we loop back to the top of doCustom after processing a backslash
command, we must reset the "now" timestamp, because that's used to
calculate the time spent executing the previous command.
Report and fix by Fabien Coelho. Backpatch to 9.5, where this was broken.
The reverted changes did not narrow the semantic gap between the MSVC
build system and the GNU make build system. For targets old and new
that run multiple suites (contribcheck, modulescheck, tapcheck), restore
vcregress.pl to mimicking "make -k" rather than the "make -S" default.
Lack of "-k" would be more burdensome than lack of "-S". Keep changes
reflecting contemporary changes to the GNU make build system, and keep
updates to Makefile parsing. Keep the loss of --psqldir in "check" and
"ecpgcheck" targets; it had been a no-op when used alongside
--temp-install. No log message mentioned any of the reverted changes.
Based on a germ by Michael Paquier. Back-patch to 9.5.
This code relied on knowing exactly where in the source tree temporary
installations might appear. A reasonable hacker may not think to update
this code when adding use of a temporary installation, making it
fragile. Observe that commit 9fa8b0ee90
broke it unnoticed, and commit dcae5facca
fixed it unnoticed. Back-patch to 9.5 only; use of temporary
installations is unlikely to change in released versions.
Policy USING and WITH CHECK expressions were using EXPR_KIND_WHERE for
parse analysis, which results in inappropriate ERROR messages when
the expression contains unsupported constructs such as aggregates.
Create a new ParseExprKind called EXPR_KIND_POLICY and tailor the
related messages to fit.
Reported by Noah Misch. Reviewed by Dean Rasheed, Alvaro Herrera,
and Robert Haas. Back-patch to 9.5 where RLS was introduced.
A Salesforce colleague of mine griped that the regression tests don't
exercise EvalPlanQualFetchRowMarks() and allied routines. Which is
a fair complaint. Add test cases that go through the REFERENCE and COPY
code paths. Unfortunately we don't have sufficient infrastructure right
now to exercise the FDW code path in the isolation tests, but this is
surely better than before.
AlterPolicy() and CreatePolicy() lacked their respective hook invocations.
Noted by Noah Misch, review by Dean Rasheed. Back-patch to 9.5 where
RLS was introduced.
On Windows, use listen_address=127.0.0.1 to allow TCP connections. We were
already using "pg_regress --config-auth" to set up HBA appropriately. The
standard_initdb helper function now sets up the server's
unix_socket_directories or listen_addresses in the config file, so that
they don't need to be specified in the pg_ctl command line anymore. That
way, the pg_ctl invocations in test programs don't need to differ between
Windows and Unix.
Add another helper function to configure the server's pg_hba.conf to allow
replication connections. The configuration is done similarly to "pg_regress
--config-auth": trust on domain sockets on Unix, and SSPI authentication on
Windows.
Replace calls to "cat" and "touch" programs with built-in perl code, as
those programs don't normally exist on Windows.
Add instructions in the docs on how to install IPC::Run on Windows. Adjust
vcregress.pl to not replace PERL5LIB completely in vcregress.pl, because
otherwise cannot install IPC::Run in a non-standard location easily.
Michael Paquier, reviewed by Noah Misch, some additional tweaking by me.
This option specifies a replication slot for WAL streaming (-X stream),
so that there can be continuous replication slot use between WAL
streaming during the base backup and the start of regular streaming
replication.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
When DefineQueryRewrite() is about to convert a table to a view, it checks
the table for features unavailable to views. For example, it rejects tables
having triggers. It omits to reject tables having relrowsecurity or a
pg_policy record. Fix that. To faciliate the repair, invent
relation_has_policies() which indicates the presence of policies on a
relation even when row security is disabled for that relation.
Reported by Noah Misch. Patch by me, review by Stephen Frost. Back-patch
to 9.5 where RLS was introduced.
CreatePolicy() and AlterPolicy() omit to create a pg_shdepend entry for
each role in the TO clause. Fix this by creating a new shared dependency
type called SHARED_DEPENDENCY_POLICY and assigning it to each role.
Reported by Noah Misch. Patch by me, reviewed by Alvaro Herrera.
Back-patch to 9.5 where RLS was introduced.
The previous code resulted in memory access beyond the path bounds. The
cure is to move it into a code branch that checks the value of lex_level
is within the correct bounds.
Bug reported and diagnosed by Piotr Stefaniak.
Don't print a WARNING if we get ESRCH from a kill() that's attempting
to cancel an autovacuum worker. It's possible (and has been seen in the
buildfarm) that the worker is already gone by the time we are able to
execute the kill, in which case the failure is harmless. About the only
plausible reason for reporting such cases would be to help debug corrupted
lock table contents, but this is hardly likely to be the most important
symptom if that happens. Moreover issuing a WARNING might scare users
more than is warranted.
Also, since sending a signal to an autovacuum worker is now entirely a
routine thing, and the worker will log the query cancel on its end anyway,
reduce the message saying we're doing that from LOG to DEBUG1 level.
Very minor cosmetic cleanup as well.
Since the main practical reason for doing this is to avoid unnecessary
buildfarm failures, back-patch to all active branches.
As pointed out by Tom, since HEAD has progressed beyond 9.5 in terms of
its catalog, we need to be sure catversion of HEAD is advanced beyond
that of 9.5. Corrects my mistake in the pg_stats view commit cfa928ff.
The pg_stats view is supposed to be restricted to only show rows
about tables the user can read. However, it sometimes can leak
information which could not otherwise be seen when row level security
is enabled. Fix that by not showing pg_stats rows to users that would
be subject to RLS on the table the row is related to. This is done
by creating/using the newly introduced SQL visible function,
row_security_active().
Along the way, clean up three call sites of check_enable_rls(). The second
argument of that function should only be specified as other than
InvalidOid when we are checking as a different user than the current one,
as in when querying through a view. These sites were passing GetUserId()
instead of InvalidOid, which can cause the function to return incorrect
results if the current user has the BYPASSRLS privilege and row_security
has been set to OFF.
Additionally fix a bug causing RI Trigger error messages to unintentionally
leak information when RLS is enabled, and other minor cleanup and
improvements. Also add WITH (security_barrier) to the definition of pg_stats.
Bumped CATVERSION due to new SQL functions and pg_stats view definition.
Back-patch to 9.5 where RLS was introduced. Reported by Yaroslav.
Patch by Joe Conway and Dean Rasheed with review and input by
Michael Paquier and Stephen Frost.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master.
Author: Andres Freund
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.5 and master, 9.0-9.4 get a different patch
This code was originally written as part of parallel query effort, but
it seems to have independent value, because if we make one decision
about where to get a PGPROC when we allocate and then put it back on a
different list at backend-exit time, bad things happen. This isn't
just a theoretical risk; we fixed an actual problem of this type in
commit e280c630a8.
join_clause_is_movable_into() is approximate, in the sense that it might
sometimes return "false" when actually it would be valid to push the given
join clause down to the specified level. This is okay ... but there was
an Assert in get_joinrel_parampathinfo() that's only safe if the answers
are always exact. Comment out the Assert, and add a bunch of commentary
to clarify what's going on.
Per fuzz testing by Andreas Seltenreich. The added regression test is
a pretty silly query, but it's based on his crasher example.
Back-patch to 9.2 where the faulty logic was introduced.
This was broken in 1bc90f7a, which removed the thread-emulation. With modest
-j and -c settings the result were usually close enough that you wouldn't
notice it easily, but with a high enough thread count it would access
uninitialized memory and crash.
Per report from Andres Freund offlist.
To avoid a race condition where the relation being COPY'd could be
changed into a view or otherwise modified, keep the original lock
on the relation. Further, fully qualify the relation when building
the query up.
Also remove the poorly thought-out Assert() and check the entire
relationOids list as, post-RLS, there can certainly be multiple
relations involved and the planner does not guarantee their ordering.
Per discussion with Noah and Andres.
Back-patch to 9.5 where RLS was introduced.
Fix additional bogosity in commit 9029f4b374. Include the
BackendSslStatusBuffer in the BackendStatusShmemSize calculation,
avoid ugly and error-prone casts to char* and back, put related
code stanzas into a consistent order (and fix a couple of previous
instances of that sin). All cosmetic except for the size oversight.
On some platforms, notably ARM and PowerPC, 'char' is unsigned by
default. This fixes an assertion failure at WAL replay on such platforms.
Reported by Noah Misch. Backpatch to 9.5, where this was broken.
It does currently, and I don't see us changing that any time soon, but we
don't make that assumption anywhere else.
Per Tom Lane's suggestion. Backpatch to 9.2, like the previous patch that
added this assumption.
XLogReaderFree failed to free the per-block data buffers, when they
happened to not be used by the latest read WAL record.
Michael Paquier. Backpatch to 9.5, where the per-block buffers were added.
In GIN, an all-zeros page would be leaked forever, and never reused. Just
add them to the FSM in vacuum, and they will be reinitialized when grabbed
from the FSM. On master and 9.5, attempting to access the page's opaque
struct also caused an assertion failure, although that was otherwise
harmless.
Reported by Jeff Janes. Backpatch to all supported versions.
SP-GiST initialized an all-zeros page at vacuum, but that was not
WAL-logged, which is not safe. You might get a torn page write, when it gets
flushed to disk, and end-up with a half-initialized index page. To fix,
leave it in the all-zeros state, and add it to the FSM. It will be
initialized when reused. Also don't set the page-deleted flag when recycling
an empty page. That was also not WAL-logged, and a torn write of that would
cause the page to have an invalid checksum.
Backpatch to 9.2, where SP-GiST indexes were added.
That was otherwise harmless, but tripped the new assertion in
PageGetSpecialPointer().
Reported by Amit Langote. Backpatch to 9.5, where the assertion was added.
There is no full discussion of speculative insertions in the executor
README. There is a high-level explanation in execIndexing.c, but it doesn't
seem necessary to refer it from here.
Peter Geoghegan
I missed a restriction that commit f4abd0241d
should have enforced: we can't pull up an empty-FROM subquery if it's under
an outer join, because then we'd need to wrap its output columns in
PlaceHolderVars. As the code currently stands, the PHVs end up with empty
relid sets, which doesn't work (and is correctly caught by an Assert).
It's possible that this could be fixed by assigning the PHVs the relid
sets of the parent FromExpr/JoinExpr, but getting that to work is more
complication than I care to add right now; indeed it's likely that
we'll never bother, since pulling up empty-FROM subqueries is a rather
marginal optimization anyway.
Per report from Andreas Seltenreich. Back-patch to 9.5 where the faulty
code was added.
The planner generally expects that the estimated rowcount of any relation
is at least one row, *unless* it has been proven empty by constraint
exclusion or similar mechanisms, which is marked by installing a dummy path
as the rel's cheapest path (cf. IS_DUMMY_REL). When I split up
allpaths.c's processing of base rels into separate set_base_rel_sizes and
set_base_rel_pathlists steps, the intention was that dummy rels would get
marked as such during the "set size" step; this is what justifies an Assert
in indxpath.c's get_loop_count that other relations should either be dummy
or have positive rowcount. Unfortunately I didn't get that quite right
for append relations: if all the child rels have been proven empty then
set_append_rel_size would come up with a rowcount of zero, which is
correct, but it didn't then do set_dummy_rel_pathlist. (We would have
ended up with the right state after set_append_rel_pathlist, but that's
too late, if we generate indexpaths for some other rel first.)
In addition to fixing the actual bug, I installed an Assert enforcing this
convention in set_rel_size; that then allows simplification of a couple
of now-redundant tests for zero rowcount in set_append_rel_size.
Also, to cover the possibility that third-party FDWs have been careless
about not returning a zero rowcount estimate, apply clamp_row_est to
whatever an FDW comes up with as the rows estimate.
Per report from Andreas Seltenreich. Back-patch to 9.2. Earlier branches
did not have the separation between set_base_rel_sizes and
set_base_rel_pathlists steps, so there was no intermediate state where an
appendrel would have had inconsistent rowcount and pathlist. It's possible
that adding the Assert to set_rel_size would be a good idea in older
branches too; but since they're not under development any more, it's likely
not worth the trouble.
ON CONFLICT unique index inference had a thinko that could affect cases
where the user-supplied inference clause required that an attribute
match a particular (user specified) collation and/or opclass.
infer_collation_opclass_match() has to check for opclass and/or
collation matches and that the attribute is in the list of attributes or
expressions known to be in the definition of the index under
consideration. The bug was that these two conditions weren't necessarily
evaluated for the same index attribute.
Author: Peter Geoghegan
Discussion: CAM3SWZR4uug=WvmGk7UgsqHn2MkEzy9YU-+8jKGO4JPhesyeWg@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
Previously nested grouping set specifications accidentally weren't
flattened, but instead contained the nested specification as a element
in the outer list.
Fix this by, as actually documented in comments, concatenating the
nested set specification into the outer one. Also add tests to prevent
this from breaking again.
Author: Andrew Gierth, with tests from Jeevan Chalke
Reported-By: Jeevan Chalke
Discussion: CAM2+6=V5YvuxB+EyN4iH=GbD-XTA435TCNvnDFSD--YvXs+pww@mail.gmail.com
Backpatch: 9.5, where grouping sets were introduced
Previously we disallowed pushing down quals to WHERE in the presence of
grouping sets. That's overly restrictive.
We now instead copy quals to WHERE if applicable, leaving the
one in HAVING in place. That's because, at that stage of the planning
process, it's nontrivial to determine if it's safe to remove the one in
HAVING.
Author: Andrew Gierth
Discussion: 874mkt3l59.fsf@news-spur.riddles.org.uk
Backpatch: 9.5, where grouping sets were introduced. This isn't exactly
a bugfix, but it seems better to keep the branches in sync at this point.
Previously GROUPING() was not recognized as a aggregate expression,
erroneously allowing the planner to move it from HAVING to WHERE.
Author: Jeevan Chalke
Reviewed-By: Andrew Gierth
Discussion: CAM2+6=WG9omG5rFOMAYBweJxmpTaapvVp5pCeMrE6BfpCwr4Og@mail.gmail.com
Backpatch: 9.5, where grouping sets were introduced
The previous coding frequently failed to fail because for one it's
unusual to have rollup clauses with one column, and for another
sometimes the wrong mapping didn't cause obvious problems.
Author: Jeevan Chalke
Reviewed-By: Andrew Gierth
Discussion: CAM2+6=W=9=hQOipH0HAPbkun3Z3TFWij_EiHue0_6UX=oR=1kw@mail.gmail.com
Backpatch: 9.5, where grouping sets were introduced
Some of the older OS X critters in the buildfarm are failing regression,
with symptoms showing that a request for 100% sampling in BERNOULLI or
SYSTEM methods actually gets only around 50% of the table. gdb revealed
that the computation of the "cutoff" number was producing 0x7FFFFFFF
rather than the expected 0x100000000. Inspecting the assembly code,
it looks like gcc is trying to use lrint() instead of rint() and then
fumbling the conversion from long double to uint64. This seems like a
clear compiler bug, but assigning the intermediate result into a plain
double variable works around it, so let's just do that. (Another idea
would be to give up one bit of hash width so that we don't need to use
a uint64 cutoff, but let's see if this is enough.)
This was broken by commit 0e7e355f27 and
friends, which ignored the fact that gzopen() will treat "-1" in the
mode argument as an invalid character, which it ignores, and a flag for
compression level 1. Now, when this value is encountered no compression
level flag is passed to gzopen, leaving it to use the zlib default.
Also, enforce the documented allowed range for pg_dump's -Z option,
namely 0 .. 9, and remove some consequently dead code from
pg_backup_tar.c.
Problem reported by Marc Mamin.
Backpatch to 9.1, like the patch that introduced the bug.
Any error other than ENOENT is a bit suspicious here, and perhaps should
not be grounds for assuming the postmaster has failed. For the moment
though, just report it, and don't change the behavior otherwise. The
intent is mainly to try to determine why we are seeing intermittent
failures in this area on some buildfarm members.
Back-patch to 9.5 where some of these failures have happened.
New FK relationships for pg_transform. Also findoidjoins now detects a few
relationships it didn't before for pre-existing catalogs, as a result of
new regression tests leaving entries in those catalogs that weren't there
before.
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
UPDATE ... WHERE CURRENT OF would not work in conjunction with
RLS. Arrange to allow the CURRENT OF expression to be pushed down.
Issue noted by Peter Geoghegan. Patch by Dean Rasheed. Back patch
to 9.5 where RLS was introduced.
The wrong is_null flag was being passed to datum_to_json. Also, null
object key values are not permitted, and this was not being checked
for. Add regression tests covering these cases, and also add those tests
to the json set, even though it was doing the right thing.
Fixes bug #13514, initially diagnosed by Tom Lane.
Handling of assigned-to expressions with indirection (e.g. set f1[1] =
3) was broken for ON CONFLICT DO UPDATE. The problem was that
ParseState was consulted to determine if an INSERT-appropriate or
UPDATE-appropriate behavior should be used when transforming expressions
with indirections. When the wrong path was taken the old row was
substituted with NULL, leading to wrong results..
To fix remove p_is_update and only use p_is_insert to decide how to
transform the assignment expression, and uset p_is_insert while parsing
the on conflict statement. This isn't particularly pretty, but it's not
any worse than before.
Author: Peter Geoghegan, slightly edited by me
Discussion: CAM3SWZS8RPvA=KFxADZWw3wAHnnbxMxDzkEC6fNaFc7zSm411w@mail.gmail.com
Backpatch: 9.5, where the feature was introduced
dbf2ec1a changed make check so that the installation logs get directed
to stdout and stderr. Per discussion on -hackers, this patch restores
saving it to a file. It is now saved in /tmp_install/log, which is
created once per invocation of any make target doing regression tests.
Along the way, add a missing /log/ entry to test_ddl_deparse's
.gitignore.
Michael Paquier.
If there were no subtransactions (or multixacts) active, we would calculate
the oldestxid == next xid. That's correct, but if next XID happens to be
on the next pg_subtrans (pg_multixact) page, the page does not exist yet,
and SimpleLruTruncate will produce an "apparent wraparound" warning. The
warning is harmless in this case, but looks very alarming to users.
Backpatch to all supported versions. Patch and analysis by Thomas Munro.
The TABLESAMPLE and row security patches each overlooked this function,
though their errors of omission were opposite: RLS failed to zero out the
securityQuals field, leading to wasteful copying of useless expression
trees in finished plans, while TABLESAMPLE neglected to add a comment
saying that it intentionally *isn't* deleting the tablesample subtree.
There probably should be a similar comment about ctename, too.
Back-patch as appropriate.
Remove HeapScanDescData.rs_initblock, which wasn't being used for anything
in the final version of the patch.
Fix IndexBuildHeapScan so that it supports syncscan again; the patch
broke synchronous scanning for index builds by forcing rs_startblk
to zero even when the caller did not care about that and had asked
for syncscan.
Add some commentary and usage defenses to heap_setscanlimits().
Fix heapam so that asking for rs_numblocks == 0 does what you would
reasonably expect. As coded it amounted to requesting a whole-table
scan, because those "--x <= 0" tests on an unsigned variable would
behave surprisingly.
initdb.log and postmaster.log were moved to within the temporary instance
path by commit dcae5fa. This directory now gets removed at the end
of the run of pg_regress when there are no failures found, which makes
analysis of after-run issues difficult in some cases, and reduces the
output verbosity of the buildfarm after a run.
Fix by Michael Paquier
Backpatch to 9.5
There was already a sanity-check in the other direction: if a page was
marked with WILL_INIT, it had to be initialized by the redo routine. It's
not strictly necessary for correctness that a page is marked with WILL_INIT
if it's going to be initialized at redo, but it's a missed optimization if
nothing else.
Fix a few instances of this issue in SP-GiST, where a block in WAL record
was not marked with WILL_INIT, but was in fact always initialized at redo.
We were creating a full-page image of the page unnecessarily in those
cases.
Backpatch to 9.5, where the new WILL_INIT flag was added.
Since those role specifiers are checked in the grammar, there's no need
for the old checks to remain in place after 31eae6028e. Remove them.
Backpatch to 9.5.
Noted and patch by Jeevan Chalke
As reported by Bill Parker, PL/Tcl did not validate some malloc() calls
against NULL return. Fix by using palloc() in a new long-lived memory
context instead. This allows us to simplify error handling too, by
simply deleting the memory context instead of doing retail frees.
There's still a lot that could be done to improve PL/Tcl's memory
handling ...
This is pretty ancient, so backpatch all the way back.
Author: Michael Paquier and Álvaro Herrera
Discussion: https://www.postgresql.org/message-id/CAFrbyQwyLDYXfBOhPfoBGqnvuZO_Y90YgqFM11T2jvnxjLFmqw@mail.gmail.com
This removes some info about support procedures being used, which was
obsoleted by commit db5f98ab4f, as well as add some more documentation
on how to create new opclasses using the Minmax infrastructure.
(Hopefully we can get something similar for Inclusion as well.)
In passing, fix some obsolete mentions of "mmtuples" in source code
comments.
Backpatch to 9.5, where BRIN was introduced.
In the passing, also move AT_ReAddComment to more logical position in the
enum, after all the Constraint-related subcommands.
This fixes a compiler warning, added by commit e42375fc. Backpatch to 9.5,
like that patch.
In the previous coding, timeout would be noticed and reported only when
poll() or socket() returned zero (or the equivalent behavior on Windows).
Ordinarily that should work well enough, but it seems conceivable that we
could get into a state where poll() always returns a nonzero value --- for
example, if it is noticing a condition on one of the file descriptors that
we do not think is reason to exit the loop. If that happened, we'd be in a
busy-wait loop that would fail to terminate even when the timeout expires.
We can make this more robust at essentially no cost, by deciding to exit
of our own accord if we compute a zero or negative time-remaining-to-wait.
Previously the code noted this but just clamped the time-remaining to zero,
expecting that we'd detect timeout on the next loop iteration.
Back-patch to 9.2. While 9.1 had a version of WaitLatchOrSocket, it was
primitive compared to later versions, and did not guarantee reliable
detection of timeouts anyway. (Essentially, this is a refinement of
commit 3e7fdcffd6, which was back-patched only as far as 9.2.)
Previously, there was an inconsistency across json/jsonb operators that
operate on datums containing JSON arrays -- only some operators
supported negative array count-from-the-end subscripting. Specifically,
only a new-to-9.5 jsonb deletion operator had support (the new "jsonb -
integer" operator). This inconsistency seemed likely to be
counter-intuitive to users. To fix, allow all places where the user can
supply an integer subscript to accept a negative subscript value,
including path-orientated operators and functions, as well as other
extraction operators. This will need to be called out as an
incompatibility in the 9.5 release notes, since it's possible that users
are relying on certain established extraction operators changed here
yielding NULL in the event of a negative subscript.
For the json type, this requires adding a way of cheaply getting the
total JSON array element count ahead of time when parsing arrays with a
negative subscript involved, necessitating an ad-hoc lex and parse.
This is followed by a "conversion" from a negative subscript to its
equivalent positive-wise value using the count. From there on, it's as
if a positive-wise value was originally provided.
Note that there is still a minor inconsistency here across jsonb
deletion operators. Unlike the aforementioned new "-" deletion operator
that accepts an integer on its right hand side, the new "#-" path
orientated deletion variant does not throw an error when it appears like
an array subscript (input that could be recognized by as an integer
literal) is being used on an object, which is wrong-headed. The reason
for not being stricter is that it could be the case that an object pair
happens to have a key value that looks like an integer; in general,
these two possibilities are impossible to differentiate with rhs path
text[] argument elements. However, we still don't allow the "#-"
path-orientated deletion operator to perform array-style subscripting.
Rather, we just return the original left operand value in the event of a
negative subscript (which seems analogous to how the established
"jsonb/json #> text[]" path-orientated operator may yield NULL in the
event of an invalid subscript).
In passing, make SetArrayPath() stricter about not accepting cases where
there is trailing non-numeric garbage bytes rather than a clean NUL
byte. This means, for example, that strings like "10e10" are now not
accepted as an array subscript of 10 by some new-to-9.5 path-orientated
jsonb operators (e.g. the new #- operator). Finally, remove dead code
for jsonb subscript deletion; arguably, this should have been done in
commit b81c7b409.
Peter Geoghegan and Andrew Dunstan
In commit 1345cc67bb, I introduced caching
of expressions representing type-cast operations into plpgsql. However,
I supposed that I could cache both the expression trees and the evaluation
state trees derived from them for the life of the session. This doesn't
work, because we execute the expressions in plpgsql's simple_eval_estate,
which has an ecxt_per_query_memory that is only transaction-lifespan.
Therefore we can end up putting pointers into the evaluation state tree
that point to transaction-lifespan memory; in particular this happens if
the cast expression calls a SQL-language function, as reported by Geoff
Winkless.
The minimum-risk fix seems to be to treat the state trees the same way
we do for "simple expression" trees in plpgsql, ie create them in the
simple_eval_estate's ecxt_per_query_memory, which means recreating them
once per transaction.
Since I had to introduce bookkeeping overhead for that anyway, I bought
back some of the added cost by sharing the read-only expression trees
across all functions in the session, instead of using a per-function
table as originally. The simple-expression bookkeeping takes care of
the recursive-usage risk that I was concerned about avoiding before.
At some point we should take a harder look at how all this works,
and see if we can't reduce the amount of tree reinitialization needed.
But that won't happen for 9.5.
Not only did this test fail to test what it was supposed to test, but it
left a user definition lying around, which caused subsequent runs of the
regression tests to fail.
This tells you what fraction of NOTIFY's queue is currently filled.
Brendan Jurd, reviewed by Merlin Moncure and Gurjeet Singh. A few
further tweaks by me.
xlc provides "long long" unconditionally at C99-compatible language
levels, and this option provokes a warning. The warning interferes with
"configure" tests that fail in response to any warning. Notably, before
commit 85a2a8903f, it interfered with the
test for -qnoansialias. Back-patch to 9.0 (all supported versions).
It's standard for quicksort implementations, after having partitioned the
input into two subgroups, to recurse to process the smaller partition and
then handle the larger partition by iterating. This method guarantees
that no more than log2(N) levels of recursion can be needed. However,
Bentley and McIlroy argued that checking to see which partition is smaller
isn't worth the cycles, and so their code doesn't do that but just always
recurses on the left partition. In most cases that's fine; but with
worst-case input we might need O(N) levels of recursion, and that means
that qsort could be driven to stack overflow. Such an overflow seems to
be the only explanation for today's report from Yiqing Jin of a SIGSEGV
in med3_tuple while creating an index of a couple billion entries with a
very large maintenance_work_mem setting. Therefore, let's spend the few
additional cycles and lines of code needed to choose the smaller partition
for recursion.
Also, fix up the qsort code so that it properly uses size_t not int for
some intermediate values representing numbers of items. This would only
be a live risk when sorting more than INT_MAX bytes (in qsort/qsort_arg)
or tuples (in qsort_tuple), which I believe would never happen with any
caller in the current core code --- but perhaps it could happen with
call sites in third-party modules? In any case, this is trouble waiting
to happen, and the corrected code is probably if anything shorter and
faster than before, since it removes sign-extension steps that had to
happen when converting between int and size_t.
In passing, move a couple of CHECK_FOR_INTERRUPTS() calls so that it's
not necessary to preserve the value of "r" across them, and prettify
the output of gen_qsort_tuple.pl a little.
Back-patch to all supported branches. The odds of hitting this issue
are probably higher in 9.4 and up than before, due to the new ability
to allocate sort workspaces exceeding 1GB, but there's no good reason
to believe that it's impossible to crash older branches this way.
The result closely resembles linking of these modules for the "win32"
port. Augment the $(exports_file) header so the file is also usable as
an import file. Unfortunately, relocating an AIX installation will now
require adding $(pkglibdir) to LD_LIBRARY_PATH. Back-patch to 9.5,
where the modules were introduced.
This allows PostgreSQL modules and their dependencies to have undefined
symbols, resolved at runtime. Perl module shared objects rely on that
in Perl 5.8.0 and later. This fixes the crash when PL/PerlU loads such
modules, as the hstore_plperl test suite does. Module authors can link
using -Wl,-G to permit undefined symbols; by default, linking will fail
as it has. Back-patch to 9.0 (all supported versions).
Other options cannot be changed, as it's not totally clear if cached plans
would need to be invalidated if one of the other options change. Selectivity
estimator functions only change plan costs, not correctness of plans, so
those should be safe.
Original patch by Uriy Zhuravlev, heavily edited by me.
In the test query I added for ALTER TABLE retaining comments, the order of
the result rows was not stable, and varied across systems. Add an ORDER BY
to make the order predictable. This should fix the buildfarm failures.
When a column's datatype is changed, ATExecAlterColumnType() rebuilds all
the affected indexes and constraints, and the comments from the old
indexes/constraints were not carried over.
To fix, create a synthetic COMMENT ON command in the work queue, to re-add
any comments on constraints. For indexes, there's a comment field in
IndexStmt that is used.
This fixes bug #13126, reported by Kirill Simonov. Original patch by
Michael Paquier, reviewed by Petr Jelinek and me. This bug is present in
all versions, but only backpatch to 9.5. Given how minor the issue is, it
doesn't seem worth the work and risk to backpatch further than that.
The code in ATPostAlterTypeParse was very deeply indented, mostly because
there were two nested switch-case statements, which add a lot of
indentation. Use if-else blocks instead, to make the code less indented
and more readable.
This is in preparation for next patch that makes some actualy changes to
the function. These cosmetic parts have been separated to make it easier
to see the real changes in the other patch.
Per Coverity (not that any of these are so non-obvious that they should not
have been caught before commit). The extent of leakage is probably minor
to unnoticeable, but a leak is a leak. Back-patch as necessary.
Michael Paquier
pg_receivexlog and pg_recvlogical error out when --create-slot is
specified and a slot with the same name already exists. In some cases,
especially with pg_receivexlog, that's rather annoying and requires
additional scripting.
Backpatch to 9.5 as slot control functions have newly been added to
pg_receivexlog, and there doesn't seem much point leaving it in a less
useful state.
Discussion: 20150619144755.GG29350@alap3.anarazel.de
As noted by Noah Misch, CreatePolicy() and AlterPolicy() omit to call
assign_expr_collations() on the node trees. Fix the omission and add
his test case to the rowsecurity regression test.
Ordinarily, a failure (unexpected exit status) of the startup subprocess
should be considered fatal, so the postmaster should just close up shop
and quit. However, if we sent the startup process a SIGQUIT or SIGKILL
signal, the failure is hardly "unexpected", and we should attempt restart;
this is necessary for recovery from ordinary backend crashes in hot-standby
scenarios. I attempted to implement the latter rule with a two-line patch
in commit 442231d7f7, but it now emerges that
that patch was a few bricks shy of a load: it failed to distinguish the
case of a signaled startup process from the case where the new startup
process crashes before reaching database consistency. That resulted in
infinitely respawning a new startup process only to have it crash again.
To handle this properly, we really must track whether we have sent the
*current* startup process a kill signal. Rather than add yet another
ad-hoc boolean to the postmaster's state, I chose to unify this with the
existing RecoveryError flag into an enum tracking the startup process's
state. That seems more consistent with the postmaster's general state
machine design.
Back-patch to 9.0, like the previous patch.
When enabling wal_compression, there is a risk to leak data similarly to
the BREACH and CRIME attacks on SSL where the compression ratio of
a full page image gives a hint of what is the existing data of this page.
This vulnerability is quite cumbersome to exploit in practice, but doable.
So this patch makes wal_compression PGC_SUSET in order to prevent
non-superusers from enabling it and exploiting the vulnerability while
DBA thinks the risk very seriously and disables it in postgresql.conf.
Back-patch to 9.5 where wal_compression was introduced.
Create a log file for each test run. Stdout and stderr of the test script,
as well as any subprocesses run as part of the test, are redirected to
the log file. This makes it a lot easier to debug test failures. Also print
the test output (ok 12 - ... messages) to the log file, and the command
line of any external programs executed with the system_or_bail and run_log
functions. This makes it a lot easier to debug failing tests.
Modify some of the pg_ctl and other command invocations to not use 'silent'
or 'quiet' options, and don't redirect output to /dev/null, so that you get
all the information in the log instead.
In the passing, construct some command lines in a way that works if $tempdir
contains quote-characters. I haven't systematically gone through all of
them or tested that, so I don't know if this is enough to make that work.
pg_rewind tests had a custom mechanism for creating a similar log file. Use
the new generic facility instead.
Michael Paquier and me.
This formalizes a decision implicit in commit
4ea51cdfe8 and adds clean detection of
affected systems. Vendor updates are available for each such known bug.
Back-patch to 9.5, where the aforementioned commit first appeared.
POSIX does not specify the -q option, and many implementations do not
offer it. Don't bother changing the MSVC build system, because having
non-GNU diff on Windows is vanishingly unlikely. Back-patch to 9.2,
where this invocation was introduced.
The psql crash happened when no current connection existed. (The second
new check is optional given today's undocumented NULL argument handling
in PQhost() etc.) Back-patch to 9.0 (all supported versions).
Test the interactions with permissions and LOCK TABLE. Specifically
ROW EXCLUSIVE, ACCESS SHARE, and ACCESS EXCLUSIVE modes against
SELECT, INSERT, UPDATE, DELETE, and TRUNCATE permissions. Discussed
by Stephen Frost and Michael Paquier, patch by the latter. Backpatch
to 9.5 where matching behavior was first committed.
SUSv2-era shells don't set the PWD variable, though anything more modern
does. In the buildfarm environment this could lead to test.sh executing
with PWD pointing to $HOME or another high-level directory, so that there
were conflicts between concurrent executions of the test in different
branch subdirectories. This appears to be the explanation for recent
intermittent failures on buildfarm members binturong and dingo (and might
well have something to do with the buildfarm script's failure to capture
log files from pg_upgrade tests, too).
To fix, just use `pwd` in place of $PWD. AFAICS test.sh is the only place
in our source tree that depended on $PWD. Back-patch to all versions
containing this script.
Per buildfarm. Thanks to Oskari Saarenmaa for diagnosing the problem.
If an allocation fails in the main message handling loop, pqParseInput3
or pqParseInput2, it should not be treated as "not enough data available
yet". Otherwise libpq will wait indefinitely for more data to arrive from
the server, and gets stuck forever.
This isn't a complete fix - getParamDescriptions and getCopyStart still
have the same issue, but it's a step in the right direction.
Michael Paquier and me. Backpatch to all supported versions.
When spilling transaction data to disk a simple typo caused the output
file to be closed and reopened for every serialized change. That happens
to not have a huge impact on linux, which is why it probably wasn't
noticed so far, but on windows that appears to trigger actual disk
writes after every change. Not fun.
The bug fortunately does not have any impact besides speed. A change
could end up being in the wrong segment (last instead of next), but
since we read all files to the end, that's just ugly, not really
problematic. It's not a problem to upgrade, since transaction spill
files do not persist across restarts.
Bug: #13484
Reported-By: Olivier Gosseaume
Discussion: 20150703090217.1190.63940@wrigleys.postgresql.org
Backpatch to 9.4, where logical decoding was added.
The previous coding tried to handle possible failures when fsyncing a
tty or pipe fd by accepting EINVAL - but apparently some
platforms (windows, OSX) don't reliably return that. So instead check
whether the output fd refers to a pipe or a tty when opening it.
Reported-By: Olivier Gosseaume, Marko Tiikkaja
Discussion: 559AF98B.3050901@joh.to
Backpatch to 9.4, where pg_recvlogical was added.
Build.bat and vcregress.bat got similar treatment years ago. I'm not sure
why install.bat wasn't treated at the same time, but it seems like a good
idea anyway.
The immediate problem with the old install.bat was that it had quoting
issues, and wouldn't work if the target directory's name contained spaces.
This fixes that problem.
We're interested in the buffer size of the socket that's connected to the
client, not the one that's listening for new connections. It happened to
work, as default buffer size is the same on both, but it was clearly not
wrong.
Spotted by Tom Lane
It's unnecessary to set it if the default is higher in the first place.
Furthermore, setting SO_SNDBUF disables the so-called "dynamic send
buffering" feature, which hurts performance further. This can be seen
especially when the network between the client and the server has high
latency.
Chen Huajun
This builds on commit 21dcda2713 by keeping
a plpgsql function's shared ParamListInfo's entries for simple variables
(PLPGSQL_DTYPE_VARs) valid at all times. That adds a few cycles to each
assignment to such variables, but saves significantly more cycles each time
they are used; so except in the pathological case of many dead stores, this
should always be a win. Initial testing says it's good for about a 10%
speedup of simple calculations; more in large functions with many datums.
We can't use this method for row/record references unfortunately, so what
we do for those is reset those ParamListInfo slots after use; which we
can skip doing unless some of them were actually evaluated during the
previous evaluation call. So this should frequently be a win as well,
while worst case is that it's similar cost to the previous approach.
Also, closer study suggests that the previous method of instantiating a
new ParamListInfo array per evaluation is actually probably optimal for
cursor-opening executor calls. The reason is that whatever is visible in
the array is going to get copied into the cursor portal via copyParamList.
So if we used the function's main ParamListInfo for those calls, we'd end
up with all of its DTYPE_VAR vars getting copied, which might well include
large pass-by-reference values that the cursor actually has no need for.
To avoid a possible net degradation in cursor cases, go back to creating
and filling a private ParamListInfo in those cases (which therefore will be
exactly the same speed as before 21dcda2713). We still get some benefit
out of this though, because this approach means that we only have to defend
against copyParamList's try-to-fetch-every-slot behavior in the case of an
unshared ParamListInfo; so plpgsql_param_fetch() can skip testing
expr->paramnos in the common case.
To ensure that the main ParamListInfo's image of a DTYPE_VAR datum is
always valid, all assignments to such variables are now funneled through
assign_simple_var(). But this makes for cleaner and shorter code anyway.
You can no longer use pgbench with multiple threads when compiled without
--enable-thread-safety. That's an acceptable limitation these days; it
still works fine with -j1, and all modern platforms support threads anyway.
This makes future maintenance and development of the code easier.
Fabien Coelho
There were two issues here. First, if a query got stuck so that it took
e.g. 5 seconds, and progress interval was 1 second, no progress reports were
printed until the query returned. Fix so that we wake up specifically to
print the progress report. Secondly, if pgbench got stuck so that it would
nevertheless not print a progress report on time, and enough time passes
that it's already time to print the next progress report, just skip the one
that was missed. Before this patch, it would print the missed one with 0 TPS
immediately after the previous one.
Fabien Coelho. Backpatch to 9.4, where progress reports were added.
Commit de76884 changed an archive recovery so that the last WAL
segment with old timeline was renamed with suffix .partial. It should
have updated WAL-related utilities so that they can handle such
.paritial WAL files, but we forgot that.
This patch changes pg_archivecleanup so that it can clean up even
archived WAL files with .partial suffix. Also it allows us to specify
.partial WAL file name as the command-line argument "oldestkeptwalfile".
This patch also changes pg_resetxlog so that it can remove .partial
WAL files in pg_xlog directory.
pg_xlogdump cannot handle .partial WAL files. Per discussion,
we decided only to document that limitation instead of adding the fix.
Because a user can easily work around the limitation (i.e., just remove
.partial suffix from the file name) and the fix seems complicated for
very narrow use case.
Back-patch to 9.5 where the problem existed.
Review by Michael Paquier.
Discussion: http://www.postgresql.org/message-id/CAHGQGwGxMKnVHGgTfiig2Bt_2djec0in3-DLJmtg7+nEiidFdQ@mail.gmail.com
-t will now match views, foreign tables, materialized views, and sequences,
not only plain tables. This is more useful, and also more consistent with
the behavior of pg_dump's -t switch, which has always matched all relation
types.
We're still not there on matching pg_dump's behavior entirely, so mention
that in the docs.
Craig Ringer, reviewed by Pavel Stehule
Expose PG_VERSION_NUM (e.g., "90600") as a Make variable; but for
consistency with the other Make variables holding similar info,
call the variable just VERSION_NUM not PG_VERSION_NUM.
There was some discussion of making this value available as a pg_config
value as well. However, that would entail substantially more work than
this two-line patch. Given that there was not exactly universal consensus
that we need this at all, let's just do a minimal amount of work for now.
Michael Paquier, reviewed by Pavel Stehule
"TextDatumGetCString(PG_GETARG_TEXT_P(x))" is formally wrong: a text*
is not a Datum. Although this coding will accidentally fail to fail on
all known platforms, it risks leaking memory if a detoast step is needed,
unlike "TextDatumGetCString(PG_GETARG_DATUM(x))" which is what's used
elsewhere. Make pg_get_object_address() fall in line with other uses.
Noted while reviewing two-arg current_setting() patch.
This allows convenient checking for existence of a GUC from SQL, which is
particularly useful when dealing with custom variables.
David Christensen, reviewed by Jeevan Chalke
These variants used the old-style 'n'/' ' NULL indicators. The new-style
functions have been available since version 8.1. That should be long enough
that if there is still any old external code using these functions, they
can just switch to the new functions without worrying about backwards
compatibility
Peter Geoghegan
There's no point in trying to free every small allocation in these
programs that are used in a one-shot fashion, but these ones seems like
an improvement on readability grounds.
Michael Paquier, per Coverity report.
Patch by David Rowley. Backpatch to 9.5, as some of the calls were new in
9.5, and keeping the code in sync with master makes future backpatching
easier.
It's called "missing_ok" in the docs and in the C code.
I refrained from doing a catversion bump for this, because the name of an
input argument is just documentation, it has no effect on any callers.
Michael Paquier
Commit 179cdd09 added macros to check if a filename is a WAL segment
or other such file. However there were still some instances of the
strlen + strspn combination to check for that in WAL-related utilities
like pg_archivecleanup. Those checks can be replaced with the macros.
This patch makes use of the macros in those utilities and
which would make the code a bit easier to read.
Back-patch to 9.5.
Michael Paquier
Free the contexts holding this data after we're done using it, by the
expedient of attaching them to the PostmasterContext which we were
already taking care to delete (and where, indeed, this data used to live
before commits e5e2fc842c and 7c45e3a3c6). This saves a
probably-usually-negligible amount of space per running backend. It also
avoids leaving potentially-security-sensitive data lying around in memory
in processes that don't need it. You'd have to be unusually paranoid to
think that that amounts to a live security bug, so I've not gone so far as
to forcibly zero the memory; but there surely isn't a good reason to keep
this data around.
Arguably this is a memory management bug in the aforementioned commits,
but it doesn't seem important enough to back-patch.
