Per buildfarm animal mylodon, the plan for this test was sometimes
swapping the join order for tenk1 and tenk2. Given that add_path() has
no code that would cause this fluctuation when given paths with consistent
costs, this indicates that the costs must be fluctuating in some runs.
The only proven reason I've seen where that could happen was slight
variations in pg_class.relpages for some tables. This was demonstrated to
be true by f03a9ca43 and related discussion. Manually adjusting tenk2's
pg_class.relpages by subtracting just 1 page does cause the plan to change
for this test.
Here we've not gone to the same lengths to prove that's what's going on
in this case. Proving that does not seem worth the time. Let's just
shrink one side of the join so the additional cost of the swapped join
order is sufficiently different that if the relpages estimate is off a few
pages that the planner still shouldn't swap the join order.
Reported-by: Thomas Munro
Author: Andy Fan, David Rowley
Discussion: https://postgr.es/m/CA+hUKGLqC-NobKYfjxNM3Gexv9OJ-Fhvy9bugUcXsZjTqH7W=Q@mail.gmail.com
Don't deal with transaction timeout in PostgresMain(). Instead, release
transaction timeout activated by StartTransaction() in
CommitTransaction()/AbortTransaction()/PrepareTransaction(). Deal with both
enabling and disabling transaction timeout in assign_transaction_timeout().
Also, remove potentially flaky timeouts-long isolation test, which has no
guarantees to pass on slow/busy machines.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240215230856.pc6k57tqxt7fhldm%40awork3.anarazel.de
This commit adds timeout that is expected to be used as a prevention
of long-running queries. Any session within the transaction will be
terminated after spanning longer than this timeout.
However, this timeout is not applied to prepared transactions.
Only transactions with user connections are affected.
Discussion: https://postgr.es/m/CAAhFRxiQsRs2Eq5kCo9nXE3HTugsAAJdSQSmxncivebAxdmBjQ%40mail.gmail.com
Author: Andrey Borodin <amborodin@acm.org>
Author: Japin Li <japinli@hotmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: bt23nguyent <bt23nguyent@oss.nttdata.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
For ANY-SUBLINK, we adopted a two-stage pull-up approach to handle
different types of scenarios. In the first stage, the sublink is pulled up
as a subquery. Because of this, when writing this code, we did not have
the ability to perform lateral joins, and therefore, we were unable to
pull up Var with varlevelsup=1. Now that we have the ability to use
lateral joins, we can eliminate this limitation.
Author: Andy Fan <zhihui.fan1213@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Setting the environment variable PG_TEST_INITDB_EXTRA_OPTS passes
extra options to initdb run by pg_regress or
PostgreSQL::Test::Cluster's init.
This can be useful for a wide variety of uses, like running all tests
with checksums enabled, or with JIT enabled, or with different GUC
settings, or with different locale settings. (Not all tests are going
to pass with arbitrary options, but it is useful to run this against
specific test suites.)
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d4d2ad9f-1c1d-47a1-bb4d-c10a747d4f15%40eisentraut.org
pathkeys_useful_for_ordering() contained some needless checks to return
0 when either root->query_pathkeys or pathkeys lists were empty. This is
already handled by pathkeys_count_contained_in(), so let's have it do the
work instead of having redundant checks.
Similarly, in pathkeys_useful_for_grouping(), checking pathkeys is an
empty list just before looping over it isn't required. Technically,
neither is the list empty check for group_pathkeys, but I felt a bit
more work would have to be done to get the equivalent behavior if we'd
left it up to the foreach loop to call list_member_ptr().
This was noticed by Andy while he was reviewing a patch to improve the
UNION planner. Since that patch adds another function similar to
pathkeys_useful_for_ordering() and since I wasn't planning to copy these
redundant checks over to the new function, let's adjust the existing
code so that both functions will be consistent.
Author: Andy Fan
Discussion: https://postgr.es/m/87o7cti48f.fsf@163.com
This is extracted from a larger patch to improve the UNION planner.
While working on that, I found myself having to check what the 'rows'
parameter is for. It's not obvious that passing a negative number is the
way to have the rows estimate calculated and to find that out you need
to read code in create_append_path() and in cost_append().
Discussion: https://postgr.es/m/CAApHDvpb_63XQodmxKUF8vb9M7CxyUyT4sWvEgqeQU-GB7QFoQ@mail.gmail.com
Thanks to commit 3b00fdba9f, this check in the SIGTERM handler for
the startup process is now obsolete and can be removed. Instead of
leaving around the dead function write_stderr_signal_safe(), I've
opted to just remove it for now.
This partially reverts commit 97550c0711.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
Presently, we rely on each individual signal handler to save the
initial value of errno and then restore it before returning if
needed. This is easily forgotten and, if missed, often goes
undetected for a long time.
In commit 3b00fdba9f, we introduced a wrapper signal handler
function that checks whether MyProcPid matches getpid(). This
commit moves the aforementioned errno restoration code from the
individual signal handlers to the new wrapper handler so that we no
longer need to worry about missing it.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
In commit 97550c0711, we added a similar check to the SIGTERM
handler for the startup process. This commit adds this check to
backend signal handlers installed with pqsignal(). This is done by
using a wrapper function that performs the check before calling the
actual handler.
The hope is that this will offer more general protection against
child processes of Postgres backends inadvertently modifying shared
memory due to inherited signal handlers. Another potential
follow-up improvement is to use this wrapper handler function to
restore errno instead of relying on each individual handler
function to do so.
This commit makes the changes in commit 97550c0711 obsolete but
leaves reverting it for a follow-up commit.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
For most purposes, multiranges act like dependent objects of the
associated range type: you can't create them separately or drop them
separately. This is like the way that autogenerated array types
behave. However, a couple of points were overlooked: array types
automatically track the ownership of their base type, and array types
do not have their own permissions but use those of the base type,
while multiranges didn't emulate those behaviors. This is fairly
broken, mainly because pg_dump doesn't think it needs to worry about
multiranges as separate objects, and thus it fails to dump/restore
ownership or permissions of multiranges.
There's no apparent value in letting a multirange diverge from
its parent's ownership or permissions, so let's make them act like
arrays in these respects. However, we continue to let multiranges
be renamed or moved to a different schema independently of their
parent, since that doesn't break anything.
Discussion: https://postgr.es/m/1580383.1705343264@sss.pgh.pa.us
The failure is that the remote slot is not synchronized after the same
slot on standby gets invalidated. The reason was that remote_slot's
restart_lsn was lagged behind the standby's oldest WAL segment. The test
didn't ensure that remote_slot's LSN was advanced to the latest position
before we tried to sync the slots via new the function
pg_sync_replication_slots().
Discussion: https://postgr.es/m/CAA4eK1JLBi3HzenB6do3_hd78kN0UDD1mz-vumWE52XHHEq5Bw@mail.gmail.com
The pgcrypto docs contained a set of links for useful reading and
technical references. These sets of links were however not actively
curated and had stale content and dead links. Rather than investing
time into maintining these, this removes them altogether since there
are lots of resources online which are actively maintained.
Backpatch to all supported versions since these links have been in
the docs for a long time.
Reported-by: Hanefi Onaldi <hanefi.onaldi@microsoft.com>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/170774255387.3279713.2822272755998870925@wrigleys.postgresql.org
Backpatch-through: v12
This commit introduces a new SQL function pg_sync_replication_slots()
which is used to synchronize the logical replication slots from the
primary server to the physical standby so that logical replication can be
resumed after a failover or planned switchover.
A new 'synced' flag is introduced in pg_replication_slots view, indicating
whether the slot has been synchronized from the primary server. On a
standby, synced slots cannot be dropped or consumed, and any attempt to
perform logical decoding on them will result in an error.
The logical replication slots on the primary can be synchronized to the
hot standby by using the 'failover' parameter of
pg-create-logical-replication-slot(), or by using the 'failover' option of
CREATE SUBSCRIPTION during slot creation, and then calling
pg_sync_replication_slots() on standby. For the synchronization to work,
it is mandatory to have a physical replication slot between the primary
and the standby aka 'primary_slot_name' should be configured on the
standby, and 'hot_standby_feedback' must be enabled on the standby. It is
also necessary to specify a valid 'dbname' in the 'primary_conninfo'.
If a logical slot is invalidated on the primary, then that slot on the
standby is also invalidated.
If a logical slot on the primary is valid but is invalidated on the
standby, then that slot is dropped but will be recreated on the standby in
the next pg_sync_replication_slots() call provided the slot still exists
on the primary server. It is okay to recreate such slots as long as these
are not consumable on standby (which is the case currently). This
situation may occur due to the following reasons:
- The 'max_slot_wal_keep_size' on the standby is insufficient to retain
WAL records from the restart_lsn of the slot.
- 'primary_slot_name' is temporarily reset to null and the physical slot
is removed.
The slot synchronization status on the standby can be monitored using the
'synced' column of pg_replication_slots view.
A functionality to automatically synchronize slots by a background worker
and allow logical walsenders to wait for the physical will be done in
subsequent commits.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian based on an earlier version by Peter Eisentraut
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
This reverts commit 95fb5b4902, for reasons similar to what led to
1aa8324b81. In this case, the callback was called once per row, which
is less worse than the previous callback introduced for COPY TO called
once per argument for each row, still the patch set discussed to plug in
custom routines to the COPY paths would be able to know which subroutine
to use depending on its CopyFromState, so this led to a suboptimal
approach at the end.
For now, this part is reverted to consider better which approach to use.
Discussion: https://postgr.es/m/20240206014125.qofww7ew3dx3v3uk@awork3.anarazel.de
The following functions use a mix of bytea and text arguments, but their
C internals always used PG_GETARG_BYTEA_PP(), creating an incorrect mix
with the argument types expected by encrypt_internal():
- pgp_sym_encrypt_bytea(bytea,text[,text])
- pgp_sym_encrypt(text,text[,text])
- pgp_sym_decrypt_bytea(bytea,text[,text])
- pgp_sym_decrypt(bytea,text[,text])
- pgp_pub_encrypt_bytea(bytea,bytea[,text])
- pgp_pub_encrypt(text,bytea[,text])
- pgp_pub_decrypt_bytea(bytea, bytea[,text[,text]])
- pgp_pub_decrypt(bytea,bytea[,text[,text]])
This commit fixes the inconsistencies between the PG_GETARG*() macros
and the argument types of each function.
Both BYTEA_PP() and TEXT_PP() rely on PG_DETOAST_DATUM_PACKED(), that
returns an unaligned pointer, so this was not leading to an actual
problem as far as I know, but let's be consistent.
Author: Shihao Zhong
Discussion: https://postgr.es/m/CAGRkXqRfiWT--DzVPx_UGpNHTt0YT5Jo8eV2CtT56jNP=QpXSQ@mail.gmail.com
The comment was inexact because query_id_enabled will not be switched to
"true" even if compute_query_id is "on", unless a module requests for
it.
While on it, this adds a comment to mention that IsQueryIdEnabled()
should be used to check if query ID computation is enabled or not.
Author: Yugo Nagata
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/20240209153823.e29a68cadb14225f1362a2cf@sraoss.co.jp
Previously, an interval microseconds field close to INT64_MAX or
INT64_MIN could overflow, producing a result with not even the
correct sign, while being rounded to match a precision specification.
This seems worth fixing, but not worth back-patching, in part
because the ereturn() notation doesn't exist very far back.
Report and patch by Joseph Koshakow (some cosmetic mods by me)
Discussion: https://postgr.es/m/CAAvxfHfpuLgqJYzkUcher466Z1LpmE+5Sm+zc8L6zKCOQ+6TDQ@mail.gmail.com
For a long time, our outfuncs.c code has supposed that the string
contents of a BitString node could just be printed literally with
no concern for quoting/escaping. Now, that's okay if the string
literal contains only valid binary or hex digits ... but our lexer
doesn't check that, preferring to let bitin() be the sole authority
on what's valid. So we could have raw parse trees that contain
incorrect BitString literals, and that can result in failures when
WRITE_READ_PARSE_PLAN_TREES debugging is enabled.
Fix by using outToken() to print the string field, and debackslash()
to read it. This results in a change in the emitted representation
only in cases that would have failed before, and don't represent valid
SQL in the first place. Between that and the fact that we don't store
raw parse trees in the catalogs, I judge this safe to apply without a
catversion bump.
Per bug #18340 from Alexander Lakhin. Back-patch to v16; before that,
we lacked readfuncs support for BitString nodes, so that the problem
was only cosmetic.
Discussion: https://postgr.es/m/18340-4aa1ae6ed4121912@postgresql.org
The macOS Finder application creates .DS_Store files in directories
when opened, which creates problems for serverside utilities which
expect all files to be PostgreSQL specific files. Skip these files
when encountered in pg_checksums, pg_rewind and pg_basebackup.
This was extracted from a larger patchset for skipping hidden files
and system files, where the concencus was to just skip these. Since
this is equally likely to happen in every version, backpatch to all
supported versions.
Reported-by: Mark Guertin <markguertin@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Tobias Bussmann <t.bussmann@gmx.net>
Discussion: https://postgr.es/m/E258CE50-AB0E-455D-8AAD-BB4FE8F882FB@gmail.com
Backpatch-through: v12
If available, read directly from WAL buffers, avoiding the need to go
through the filesystem. Only for physical replication for now, but can
be expanded to other callers.
In preparation for replicating unflushed WAL data.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXKKK%3DwbiG5_t6dGao5GoecMwRkhr7GjVBM_jg54%2BNa%3DQ%40mail.gmail.com
Reviewed-by: Andres Freund, Alvaro Herrera, Nathan Bossart, Dilip Kumar, Nitin Jadhav, Melih Mutlu, Kyotaro Horiguchi
Doing this instead of regular updates serves two purposes. First, that avoids
possible waiting on the row-level lock. Second, that avoids dealing with
TOAST.
It's known that changes made by heap_inplace_update() may be lost due to
concurrent normal updates. However, we are OK with that. The subsequent
connections will still have a chance to set "dathasloginevt" to false.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/e2a0248e-5f32-af0c-9832-a90d303c2c61%40gmail.com
Commit 5579388d removed code that supplied a fallback implementation of
getaddrinfo(), which was dead code on modern systems. One tiny piece of
the removed code was still doing something useful on Windows, though:
that OS's own gai_strerror()/gai_strerrorA() function returns a pointer
to a static buffer that it overwrites each time, so it's not
thread-safe. In rare circumstances, a multi-threaded client program
could get an incorrect or corrupted error message.
Restore the replacement gai_strerror() function, though now that it's
only for Windows we can put it into a win32-specific file and cut it
down to the errors that Windows documents. The error messages here are
taken from FreeBSD, because Windows' own messages seemed too verbose.
Back-patch to 16.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKz%2BF9d2PTiXwfYV7qJw%2BWg2jzACgSDgPizUw7UG%3Di58A%40mail.gmail.com
This makes use of StringInfo to assemble command lines, instead of
using fixed-size buffers and the (remote) possibility of "command too
long" errors. Also makes the code a bit simpler.
This covers the test driver programs pg_regress and
pg_isolation_regress.
Similar to the changes done for pg_rewind in a33e17f210.
Discussion: https://www.postgresql.org/message-id/2be4fee5-738f-4749-b9f8-b452032c7ade%40eisentraut.org
Timezones are not immutable and so neither is any function that relies on
them. In commit 66ea94e8, we introduced a few methods which do casting
from one time to another and thus may involve the current timezone. To
preserve the immutability of jsonpath functions currently marked
immutable, disallow these methods from being called from non-TZ aware
functions.
Jeevan Chalke, per a report from Jian He.
Since its introduction, pg_get_expr() has intended to silently
return NULL if called with an invalid relation OID, as can happen
when scanning the catalogs concurrently with relation drops.
However, there is a race condition: we check validity of the OID
at the start, but it could get dropped just afterward, leading to
failures. This is the cause of some intermittent instability we're
seeing in a proposed new test case, and presumably it's a hazard in
the field as well.
We can fix this by AccessShareLock-ing the target relation for the
duration of pg_get_expr(). Since we don't require any permissions
on the target relation, this is semantically a bit undesirable. But
it turns out that the set_relation_column_names() subroutine already
takes a transient AccessShareLock on that relation, and has done since
commit 2ffa740be in 2012. Given the lack of complaints about that, it
seems like there should be no harm in holding the lock a bit longer.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/31ddcc01-a71b-4e8c-9948-01d1c47293ca@eisentraut.org
We previously supposed that it was okay for different threads to
call bindtextdomain() concurrently (cf. commit 1f655fdc3).
It now emerges that there's at least one gettext implementation
in which that triggers an abort() crash, so let's stop doing that.
Add mutexes guarding libpq's and ecpglib's calls, which are the
only ones that need worry about multithreaded callers.
Note: in libpq, we could perhaps have piggybacked on
default_threadlock() to avoid defining a new mutex variable.
I judge that not terribly safe though, since libpq_gettext could
be called from code that is holding the default mutex. If that
were the first such call in the process, it'd fail. An extra
mutex is cheap insurance against unforeseen interactions.
Per bug #18312 from Christian Maurer. Back-patch to all
supported versions.
Discussion: https://postgr.es/m/18312-bbbabc8113592b78@postgresql.org
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
Fix pthread-win32.h and pthread-win32.c to provide a more complete
emulation of POSIX pthread mutexes: define PTHREAD_MUTEX_INITIALIZER
and make sure that pthread_mutex_lock() can operate on a mutex
object that's been initialized that way. Then we don't need the
duplicative platform-specific logic in default_threadlock() and
pgtls_init(), which we'd otherwise need yet a third copy of for
an upcoming bug fix.
Also, since default_threadlock() supposes that pthread_mutex_lock()
cannot fail, try to ensure that that's actually true, by getting
rid of the malloc call that was formerly involved in initializing
an emulated mutex. We can define an extra state for the spinlock
field instead.
Also, replace the similar code in ecpglib/misc.c with this version.
While ecpglib's version at least had a POSIX-compliant API, it
also had the potential of failing during mutex init (but here,
because of CreateMutex failure rather than malloc failure). Since
all of misc.c's callers ignore failures, it seems like a wise idea
to avoid failures here too.
A further improvement in this area could be to unify libpq's and
ecpglib's implementations into a src/port/pthread-win32.c file.
But that doesn't seem like a bug fix, so I'll desist for now.
In preparation for the aforementioned bug fix, back-patch to all
supported branches.
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
Commit 5b2f4afffe refactored find_other_exec() and in the process
created pipe_read_line() into a static routine for reading a single
line of output, aimed at reading version numbers. Commit a7e8ece41
later exposed it externally in order to read a postgresql.conf GUC
using "postgres -C ..". Further, f06b1c598 also made use of it for
reading a version string much like find_other_exec(). The internal
variable remained "pgver", even when used for other purposes.
Since the function requires passing a buffer and its size, and at
most size - 1 bytes will be read via fgets(), there is a truncation
risk when using this for reading GUCs (like how pg_rewind does,
though the risk in this case is marginal).
To keep this as generic functionality for reading a line from a pipe,
this refactors pipe_read_line() into returning an allocated buffer
containing all of the line to remove the risk of silent truncation.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/DEDF73CE-D528-49A3-9089-B3592FD671A9@yesql.se
group_keys_reorder_by_pathkeys() function searched for matching pathkeys
within root->group_pathkeys. That could lead to picking an aggregate pathkey
and using its pathkey->pk_eclass->ec_sortref as an argument of
get_sortgroupref_clause_noerr(). Given that ec_sortref of an aggregate pathkey
references aggregate targetlist not query targetlist, this leads to incorrect
query optimization.
Fix this by looking for matching pathkeys only within the first
num_groupby_pathkeys pathkeys.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwY3Ek%3DcLThgd8FdaSc5JRDVt0FaV00gMcWra%2BTAR4gGUw%40mail.gmail.com
Author: Andrei Lepikhov, Alexander Korotkov
Fix for 344d62fb9a9: That commit introduced unlogged sequences and
made it so that identity/serial sequences automatically get the
persistence level of their owning table. But this works only for
CREATE TABLE and not for ALTER TABLE / ADD COLUMN. The latter would
always create the sequence as logged (default), independent of the
persistence setting of the table. This is fixed here.
Note: It is allowed to change the persistence of identity sequences
directly using ALTER SEQUENCE. So mistakes in existing databases can
be fixed manually.
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/c4b6e2ed-bcdf-4ea7-965f-e49761094827%40eisentraut.org
This commit fixes an oversight introduced in c61a2f5841, where COPY TO
would attempt to do encoding conversions even if the encodings of the
client and the server matched for multi-byte encodings. All conversions
go through pg_any_to_server() that makes the conversion a no-op when the
encodings of the client and the server match, even for multi-byte
encodings.
The logic was fine, but setting CopyToStateData->need_transcoding would
cause strlen() to be called for nothing for each attribute of all the
rows copied, and that was showing high in some profiles (more attributes
make that easier to reach). This change improves the runtime of some
worst-case COPY TO queries by 15%~ (number present at least here).
This is a performance improvement, so no backpatch is done out of
caution as this is not a regression.
Reported-by: Andres Freund
Analyzed-by: Andres Freund
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/20240206020504.edijzczkgd25ek6z@awork3.anarazel.de
Peter Eisentraut
Amit Kapila
David Rowley
Alexander Korotkov
Tom Lane
Nathan Bossart
Daniel Gustafsson
Michael Paquier
Heikki Linnakangas
Jeff Davis
Thomas Munro
Andrew Dunstan