accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
it seems more suitable for the naming convention in libpq.
New function PQsetClientEncoding added. It makes possible to change
the client encoding on the fly without setting PGCLIENTENCODING.
Here is a patch to bring both libpq and psql to a state where it compiles on
win32 (native) again. A lot of things have changed, and I have not been able
to keep up with them all, so it has been broken for quite a while.
After this patch, at least it compiles. It also talks "basic talk" to the
server, but I have not yet tested all things. Sending queries, and using
e.g. \d or \dt works fine. The rest will have to be tested further.
It also bumps the version on libpq.dll to 7.0.
Everything should be enclosed in #ifdef WIN32, unless I have missed
something. Except for one or maybe two places where I have moved a #include
that should not be used on win32 from the "global area" into a "#ifndef
WIN32 area".
//Magnus
by creating a race condition. It wasn't waiting for select() to say
write-ready immediately after connect, which meant that you might get
an unhelpful 'broken pipe' error message if connect failed, rather than
the intended error message.
in libpq --- mostly, poor response to error conditions. You now actually
get to see the postmaster's 'The Data Base System is starting up' message,
which you didn't before. I suspect the SSL code is still broken though.
parameter in some flavor of Unix, but Linux, HPUX, and SunOS all say
it's int. For now I'm just going to make it int so that I can compile.
If the other way is actually necessary on some Unix somewhere, I guess
we will need a configure test...
PQconnectStart
PQconnectPoll
PQresetStart
PQresetPoll
PQsetenvStart
PQsetenvPoll
PQsetenvAbort
and brings into the published interface
PQsetenv.
The first four are asynchronous analogues of PQconnectdb and PQreset -
they allow an application to connect to the DB without blocking on
remote I/O.
The PQsetenv functions perform an environment negotiation with the
server.
Internal to libpq, pqReadReady and pqWriteReady have been made available
across the library (they were previously static functions inside
fe-misc.c). A lot of internal rearrangement has been necessary to
support these changes.
The API documentation has been updated also.
Caveats:
o The Windows code does not default to using non-blocking sockets,
since I have no documentation: Define WIN32_NON_BLOCKING_CONNECTIONS to
do that.
o The SSL code still blocks.
Ewan Mellor.
* Add use of 'const' for varibles in source tree
(which is misspelled, btw.)
I went through the front-end libpq code and did so. This affects in
particular the various accessor functions (such as PQdb() and
PQgetvalue()) as well as, by necessity, the internal helpers they use.
I have been really thorough in that regard, perhaps some people will find
it annoying that things like
char * foo = PQgetvalue(res, 0, 0)
will generate a warning. On the other hand it _should_ generate one. This
is no real compatibility break, although a few clients will have to be
fixed to suppress warnings. (Which again would be in the spirit of the
above TODO.)
In addition I replaced some int's by size_t's and removed some warnings
(and generated some new ones -- grmpf!). Also I rewrote PQoidStatus (so it
actually honors the const!) and supplied a new function PQoidValue that
returns a proper Oid type. This is only front-end stuff, none of the
communicaton stuff was touched.
The psql patch also adds some new consts to honor the new libpq situation,
as well as fixes a fatal condition that resulted when using the -V
(--version) option and there is no database listening.
So, to summarize, the psql you should definitely put in (with or without
the libpq). If you think I went too far with the const-mania in libpq, let
me know and I'll make adjustments. If you approve it, I will also update
the docs.
-Peter
--
Peter Eisentraut Sernanders vaeg 10:115
One, it now returns the previous hook. That way people don't have to dig
around in libpq-int.h for that information anymore. It previously
returned void, so there should be no incompatibilities.
Second, you cannot set the callback to NULL anymore. (Of course you can
still call it with NULL just to get the current hook.) The way libpq uses
the callback pointer, having a NULL there wasn't very healthy.
Peter Eisentraut
When drawing up a very simple "text-drawing" of how the negotiation is done,
I realised I had done this last part (fallback) in a very stupid way. Patch
#4 fixes this, and does it in a much better way.
Included is also the simple text-drawing of how the negotiation is done.
//Magnus
error/notice message lengths, and number of fields per tuple. Add
pqexpbuffer.c/.h, a frontend version of backend's stringinfo module.
This is first step in applying Mike Ansley's long-query patches,
even though he didn't do any of these particular changes...
been applied. The patches are in the .tar.gz attachment at the end:
varchar-array.patch this patch adds support for arrays of bpchar() and
varchar(), which where always missing from postgres.
These datatypes can be used to replace the _char4,
_char8, etc., which were dropped some time ago.
block-size.patch this patch fixes many errors in the parser and other
program which happen with very large query statements
(> 8K) when using a page size larger than 8192.
This patch is needed if you want to submit queries
larger than 8K. Postgres supports tuples up to 32K
but you can't insert them because you can't submit
queries larger than 8K. My patch fixes this problem.
The patch also replaces all the occurrences of `8192'
and `1<<13' in the sources with the proper constants
defined in include files. You should now never find
8192 hardwired in C code, just to make code clearer.
--
Massimo Dal Zotto
Ok. I made patches replacing all of "#if FALSE" or "#if 0" to "#ifdef
NOT_USED" for current. I have tested these patches in that the
postgres binaries are identical.
Included patches fix a portability problem of unsetenv() used in
6.4.2 multi-byte support. unsetenv() is only avaliable on FreeBSD and
Linux so I decided to replace with putenv().
Here are patches needed to complie under AIX 4.2.
I changed configure.in, pqcomm.c, config.h.in, and fe-connect.c.
Also I had to install flex because lex did not want to translate pgc.l.
structs from libpq-fe.h, as we previously discussed.
There turned out to be sloppy coding practices in more places than
I had realized :-(, but all in all I think it was a well-worth-while
exercise.
I ended up adding several routines to libpq's API in order to respond
to application requirements that were exposed by this work. I owe the
docs crew updates for libpq.sgml to describe these changes. I'm way too
tired to work on the docs tonight, however.
This is the last major change I intend to submit for 6.4. I do want
to see if I can make libpgtcl work with Tcl 8.0 before we go final,
but hopefully that will be a minor bug fix.
From: Tom Lane <tgl@sss.pgh.pa.us>
Attached is a patch for this weekend's work on libpq. I've dealt
with several issues:
<for details: see message, in pgsql-patches archive for above data>
couple weeks ago on the hackers and interfaces lists:
1. When the backend sends a NOTICE message and closes the connection
(typically, because it was told to by the postmaster after
another backend coredumped), libpq will now print the notice
and close the connection cleanly. Formerly, the frontend app
would usually terminate ungracefully due to a SIGPIPE. (I am
not sure if 6.3.2 behaved that way, but the current cvs sources
do...)
2. libpq's various printouts to stderr are now fed through a single
"notice processor" routine, which can be overridden by the
application to direct notices someplace else. This should ease
porting libpq to Windows.
I also noticed and fixed a problem in PQprint: when sending output
to a pager subprocess, it would disable SIGPIPE in case the pager
terminates early (this is good) --- but afterwards it reset SIGPIPE
to SIG_DFL, rather than restoring the application's prior setting
(bad).
regards, tom lane
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
The attached patches respond to discussion that was on pgsql-hackers
around the beginning of June (see thread "libpgtcl bug (and symptomatic
treatment)"). The changes are:
1. Remove code in connectDB that throws away the password after making
a connection. This doesn't really add much security IMHO --- a bad guy
with access to your client's address space can likely extract the
password anyway, to say nothing of what he might do directly. And
there's the serious shortcoming that it prevents PQreset() from working
if the database requires a password.
2. Fix coredump problem: fe_sendauth did not guard against being handed
a NULL password pointer. (This is the proximate cause of the coredump-
during-PQreset problem that Magosanyi Arpad complained of last month.)
3. Remove highly questionable "error recovery" logic in libpgtcl's
pg_exec statement.
I believe the consensus of the discussion last month was in favor of
#1 and #3, but I'm just now getting around to making the change.
I realized that #2 was a bug in process of looking at the change.
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
Through some minor changes, I have been able to compile the libpq
client libraries on the Win32 platform. Since the libpq communications
part has been rewritten, this has become much easier. Enclosed is
a patch that will allow at least Microsoft Visual C++ to compile
libpq into both a static and a dynamic library. I will take a look
at porting the psql frontend as well, but I figured it was a good
idea to send in these patches first - so no major changes are done
to the files before it gets applied (if it does).
Regards,
Magnus Hagander
Tom Lane
Peter Eisentraut
Tatsuo Ishii
Bruce Momjian
Marc G. Fournier