in the relcache. It's rather silly that we have reference count leak
checks in bufmgr and in catcache, but not in relcache which will normally
have many fewer entries. Chris K-L would have caught at least one bug
in his recent DROP patch if he'd had this.
code review by Tom Lane. Remaining issues: functions that take or
return tuple types are likely to break if one drops (or adds!)
a column in the table defining the type. Need to think about what
to do here.
Along the way: some code review for recent COPY changes; mark system
columns attnotnull = true where appropriate, per discussion a month ago.
attstattarget to indicate 'use the default'. The default is now a GUC
variable default_statistics_target, and so may be changed on the fly. Along
the way we gain the ability to have pg_dump dump the per-column statistics
target when it's not the default. Patch by Neil Conway, with some kibitzing
from Tom Lane.
deleted that had another row inserted/updated to its old
value during the same statement or other statements before the
integrity check for noaction would incorrectly error. This
could happen in deferred constraints or due to triggers or
functions. It's effectively a reworking of the previous patch that
did a not exists to instead do a separate check.
Stephan Szabo
changes mentioned above, and also adds a new function to the tablefunc
API. The tablefunc API change adds the following function:
* Oid foidGetTypeId(Oid foid) - Get a function's typeid given the
* function Oid. Use this together with TypeGetTupleDesc() to get a
* TupleDesc which is derived from the function's declared return type.
In the next post I'll send the contrib/tablefunc patch, which
illustrates the usage of this new function. Also attached is a doc patch
for this change. The doc patch also adds a function that I failed to
document previously.
Joe Conway
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
pg_language.lancompiler
pg_operator.oprprec
pg_operator.oprisleft
pg_proc.proimplicit
pg_proc.probyte_pct
pg_proc.properbyte_cpu
pg_proc.propercall_cpu
pg_proc.prooutin_ratio
pg_shadow.usetrace
pg_type.typprtlen
pg_type.typreceive
pg_type.typsend
Attempts to use the obsoleted attributes of pg_operator or pg_proc
in the CREATE commands will be greeted by a warning. For pg_type,
there is no warning (yet) because pg_dump scripts still contain these
attributes.
Also remove new but already obsolete spellings
isVolatile, isStable, isImmutable in WITH clause. (Use new syntax
instead.)
> submitted on July 9:
>
> http://archives.postgresql.org/pgsql-patches/2002-07/msg00056.php
>
> Please disregard that one *if* this one is applied. If this one is
> rejected please go ahead with the July 9th patch.
The July 9th Table Function API patch mentioned above is now in CVS, so
here is an updated version of the guc patch which should apply cleanly
against CVS tip.
Joe Conway
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
tuple header. The fix is based on the thought that HEAP_MOVED_IN is
not needed any more as soon as HEAP_XMIN_COMMITTED has been set. So
in tqual.c and vacuum.c the HEAP_MOVED bits are cleared when
HEAP_XMIN_COMMITTED is set.
Vacuum robustness is enhanced by rearranging ifs, so that we have a
chance to elog(ERROR, ...) before an assertion fails.
A new regression test is included.
Manfred Koizar
extension to create binary compatible casts. Includes dependency tracking
as well.
pg_proc.proimplicit is now defunct, but will be removed in a separate
commit.
pg_dump provides a migration path from the previous scheme to declare
casts. Dumping binary compatible casts is currently impossible, though.
Implements between (symmetric / asymmetric) as a node.
Executes the left or right expression once, makes a Const out of the
resulting Datum and executes the >=, <= portions out of the Const sets.
Of course, the parser does a fair amount of preparatory work for this to
happen.
Rod Taylor
Conway (BuildTupleFromCStrings sets NULL for pass-by-value types when
intended value is 0). It also implements some other improvements
suggested by Neil.
Joe Conway
conversion procs and conversions are added in initdb. Currently
supported conversions are:
UTF-8(UNICODE) <--> SQL_ASCII, ISO-8859-1 to 16, EUC_JP, EUC_KR,
EUC_CN, EUC_TW, SJIS, BIG5, GBK, GB18030, UHC,
JOHAB, TCVN
EUC_JP <--> SJIS
EUC_TW <--> BIG5
MULE_INTERNAL <--> EUC_JP, SJIS, EUC_TW, BIG5
Note that initial contents of pg_conversion system catalog are created
in the initdb process. So doing initdb required is ideal, it's
possible to add them to your databases by hand, however. To accomplish
this:
psql -f your_postgresql_install_path/share/conversion_create.sql your_database
So I did not bump up the version in cataversion.h.
TODO:
Add more conversion procs
Add [CASCADE|RESTRICT] to DROP CONVERSION
Add tuples to pg_depend
Add regression tests
Write docs
Add SQL99 CONVERT command?
--
Tatsuo Ishii
pg_relcheck is gone; CHECK, UNIQUE, PRIMARY KEY, and FOREIGN KEY
constraints all have real live entries in pg_constraint. pg_depend
exists, and RESTRICT/CASCADE options work on most kinds of DROP;
however, pg_depend is not yet very well populated with dependencies.
(Most of the ones that are present at this point just replace formerly
hardwired associations, such as the implicit drop of a relation's pg_type
entry when the relation is dropped.) Need to add more logic to create
dependency entries, improve pg_dump to dump constraints in place of
indexes and triggers, and add some regression tests.
This is the first cut toward CREATE CONVERSION/DROP CONVERSION implementaion.
The commands can now add/remove tuples to the new pg_conversion system
catalog, but that's all. Still need work to make them actually working.
Documentations, regression tests also need work.
are managed as per request.
Moved from merging with table attributes to applying themselves during
coerce_type() and coerce_type_typmod.
Regression tests altered to test the cast() scenarios.
Rod Taylor
Reused the Expr node to hold DISTINCT which strongly resembles
the existing OP info. Define DISTINCT_EXPR which strongly resembles
the existing OPER_EXPR opType, but with handling for NULLs required
by SQL99.
We have explicit support for single-element DISTINCT comparisons
all the way through to the executor. But, multi-element DISTINCTs
are handled by expanding into a comparison tree in gram.y as is done for
other row comparisons. Per discussions, it might be desirable to move
this into one or more purpose-built nodes to be handled in the backend.
Define the optional ROW keyword and token per SQL99.
This allows single-element row constructs, which were formerly disallowed
due to shift/reduce conflicts with parenthesized a_expr clauses.
Define the SQL99 TREAT() function. Currently, use as a synonym for CAST().
two small changes to the API since last patch, which hopefully completes
the decoupling of composite function support from SRF specific support.
Joe Conway
Second cut attached. This one just adds a boolean option to the existing
function to indicate that implicit schemas are to be included (or not).
I remembered the docs as well this time :-)
Dave Page
HeapTupleHeaderData in setter and getter macros called
HeapTupleHeaderGetXmin, HeapTupleHeaderSetXmin etc.
It also introduces a "virtual" field xvac by defining
HeapTupleHeaderGetXvac and HeapTupleHeaderSetXvac. Xvac is used by
VACUUM, in fact it is stored in t_cmin.
Manfred Koizar
Will optimize the case for repeated calls for the same expression,
which seems to be the most common case. Formerly, always searched
from the first entry.
May want to look at the least-recently-used algorithm to make sure it
is identifying the right slots to reclaim. Seems silly to do math when
it seems that we could simply use an incrementing counter...
Implement SQL99 SIMILAR TO as a synonym for our existing operator "~".
Implement SQL99 regular expression SUBSTRING(string FROM pat FOR escape).
Extend the definition to make the FOR clause optional.
Define textregexsubstr() to actually implement this feature.
Update the regression test to include these new string features.
All tests pass.
Rename the regular expression support routines from "pg95_xxx" to "pg_xxx".
Define CREATE CHARACTER SET in the parser per SQL99. No implementation yet.
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
precision storage format. Previously applied the same math as used for the
64-bit integer storage format case, which was wrong.
Problem introduced recently when the 64-bit storage format was
implemented.
transaction, so as to avoid returning them out of the index AM. Saves
repeated heap_fetch operations on frequently-updated rows. Also detect
queries on unique keys (equality to all columns of a unique index), and
don't bother continuing scan once we have found first match.
Killing is implemented in the btree and hash AMs, but not yet in rtree
or gist, because there isn't an equally convenient place to do it in
those AMs (the outer amgetnext routine can't do it without re-pinning
the index page).
Did some small cleanup on APIs of HeapTupleSatisfies, heap_fetch, and
index_insert to make this a little easier.
function body (and other properties) as a function in the language
is created. This generalizes ad hoc code that already existed for
the built-in languages.
The validation now happens after the pg_proc tuple of the new function
is created, so it is possible to define recursive SQL functions.
Add some regression test cases that cover bogus function definition
attempts.
in snapshots, per my proposal of a few days ago. Also, tweak heapam.c
routines (heap_insert, heap_update, heap_delete, heap_mark4update) to
be passed the command ID to use, instead of doing GetCurrentCommandID.
For catalog updates they'll still get passed current command ID, but
for updates generated from the main executor they'll get passed the
command ID saved in the snapshot the query is using. This should fix
some corner cases associated with functions and triggers that advance
current command ID while an outer query is still in progress.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
allows the example in the CREATE SCHEMA ref page to actually work now.
Also, clean up when the transaction that initially creates a temp-table
namespace is later aborted. Simplify internal representation of search
path by folding special cases into the main list.
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
is actively dangerous, per bug report from Ewald Geschwinde 14-May-02,
and several of the rest look suspicious to me. Since there is no longer
any significant value in retail pfree's in these functions, just get
rid of all of them for safety's sake.
returns-set boolean field in Func and Oper nodes. This allows cleaner,
more reliable tests for expressions returning sets in the planner and
parser. For example, a WHERE clause returning a set is now detected
and complained of in the parser, not only at runtime.
some kibitzing from Tom Lane. Not everything works yet, and there's
no documentation or regression test, but let's commit this so Joe
doesn't need to cope with tracking changes in so many files ...
to reset session userid to the originally-authenticated name. Also,
relax SET SESSION AUTHORIZATION to allow specifying one's own username
even if one is not superuser, so as to avoid unnecessary error messages
when loading a pg_dump file that uses this command. Per discussion from
several months ago.
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
in gram.y can make use of the keywords.c string table, instead of having
their own copies of the keyword strings. This saves a few kilobytes and
more importantly eliminates an opportunity for cut-and-paste errors.
pg_database, pg_shadow, pg_group, all of which now have potentially-long
fields. Along the way, get rid of SharedSystemRelationNames list: shared
rels are now identified in their include/pg_catalog/*.h files by a
BKI_SHARED_RELATION macro, while indexes and toast rels inherit sharedness
automatically from their parent table. Fix some bugs with failure to detoast
pg_group.grolist during ALTER GROUP.
messages more uniform and internationalizable: the global array
aclcheck_error_strings[] is gone in favor of a subroutine
aclcheck_error(). Partial implementation of namespace-related
permission checks --- not all done yet.
per pghackers discussion. Add some more typsanity tests, and clean
up some problems exposed thereby (broken or missing array types for
some built-in types). Also, clean up loose ends from unknownin/out
patch.
looking for places that assume UNKNOWN == TEXT. One of those was the
"SET" type in pg_type.h, which was using textin/textout. This one I took
care of in this patch. The other suspicious place was in
string_to_dataum (which is defined in both selfuncs.c and indxpath.c). I
wasn't too sure about those, so I left them be.
Joe Conway
Use "--enable-integer-datetimes" in configuration to use this rather
than the original float8 storage. I would recommend the integer-based
storage for any platform on which it is available. We perhaps should
make this the default for the production release.
Change timezone(timestamptz) results to return timestamp rather than
a character string. Formerly, we didn't have a way to represent
timestamps with an explicit time zone other than freezing the info into
a string. Now, we can reasonably omit the explicit time zone from the
result and return a timestamp with values appropriate for the specified
time zone. Much cleaner, and if you need the time zone in the result
you can put it into a character string pretty easily anyway.
Allow fractional seconds in date/time types even for dates prior to 1BC.
Limit timestamp data types to 6 decimal places of precision. Just right
for a micro-second storage of int8 date/time types, and reduces the
number of places ad-hoc rounding was occuring for the float8-based types.
Use lookup tables for precision/rounding calculations for timestamp and
interval types. Formerly used pow() to calculate the desired value but
with a more limited range there is no reason to not type in a lookup
table. Should be *much* better performance, though formerly there were
some optimizations to help minimize the number of times pow() was called.
Define a HAVE_INT64_TIMESTAMP variable. Based on the configure option
"--enable-integer-datetimes" and the existing internal INT64_IS_BUSTED.
Add explicit date/interval operators and functions for addition and
subtraction. Formerly relied on implicit type promotion from date to
timestamp with time zone.
Change timezone conversion functions for the timetz type from "timetz()"
to "timezone()". This is consistant with other time zone coersion
functions for other types.
Bump the catalog version to 200204201.
Fix up regression tests to reflect changes in fractional seconds
representation for date/times in BC eras.
All regression tests pass on my Linux box.
different privilege bits (might as well make use of the space we were
wasting on padding). EXECUTE and USAGE bits for procedures, languages
now are separate privileges instead of being overlaid on SELECT. Add
privileges for namespaces and databases. The GRANT and REVOKE commands
work for these object types, but we don't actually enforce the privileges
yet...
(tgrelid, tgname). This provides an additional check on trigger name
uniqueness per-table (which was already enforced by the code anyway).
With this change, RelationBuildTriggers will read the triggers in
order by tgname, since it's scanning using this index. Since a
predictable trigger ordering has been requested for some time, document
this behavior as a feature. Also document that rules fire in name
order, since yesterday's changes to pg_rewrite indexing cause that too.
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
an 'opclass owner' column in pg_opclass. Nothing is done with it at
present, but since there are plans to invent a CREATE OPERATOR CLASS
command soon, we'll probably want DROP OPERATOR CLASS too, which
suggests that a notion of ownership would be a good idea.
qualified operator names directly, for example CREATE OPERATOR myschema.+
( ... ). To qualify an operator name in an expression you need to write
OPERATOR(myschema.+) (thanks to Peter for suggesting an escape hatch).
I also took advantage of having to reformat pg_operator to fix something
that'd been bugging me for a while: mergejoinable operators should have
explicit links to the associated cross-data-type comparison operators,
rather than hardwiring an assumption that they are named < and >.
entries, per pghackers discussion. This fixes aggregates to live in
namespaces, and also simplifies/speeds up lookup in parse_func.c.
Also, add a 'proimplicit' flag to pg_proc that controls whether a type
coercion function may be invoked implicitly, or only explicitly. The
current settings of these flags are more permissive than I would like,
but we will need to debate and refine the behavior; for now, I avoided
breaking regression tests as much as I could.
volatile), rather than the old cachable/noncachable distinction. This
allows indexscan optimizations in many places where we formerly didn't.
Also, add a pronamespace column to pg_proc (it doesn't do anything yet,
however).
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
depend on this rather than the trigger argument strings to locate the
other relation to test. This makes RI triggers function properly in
the presence of schemas and temp tables. Along the way, fix bogus lack
of locking in RI triggers, handle quoting of names fully correctly,
compute required sizes of query buffers with some semblance of accuracy.
path. The default behavior if no per-user schemas are created is that
all users share a 'public' namespace, thus providing behavior backwards
compatible with 7.2 and earlier releases. Probably the semantics and
default setting will need to be fine-tuned, but this is a start.
catalog namespace. This will not do as a production solution because
the interpretation of RI trigger arguments will vary depending on the
current namespace search path. I'm just putting it in so that the RI
regression tests don't fail while schema development proceeds. We
must find a better answer before 7.3 can be released.
sequence functions how to cope with qualified names. Same code is
also used for int4notin, currtid_byrelname, pgstattuple. Also,
move TOAST tables into special pg_toast namespace.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
addRangeTableEntry calls. Remove relname field from RTEs, since
it will no longer be a useful unique identifier of relations;
we want to encourage people to rely on the relation OID instead.
Further work on dumping qual expressions in EXPLAIN, too.
objects to be privilege-checked. Some change in their APIs would be
necessary no matter what in the schema environment, and simply getting
rid of the name-based interface entirely seems like the best way.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
* We should not even consider checking the row if it is no longer
* valid since it was either deleted (doesn't matter) or updated
* (in which case it'll be checked with its final values).
Stephan Szabo
before a data item is now always skipped, rather than only sometimes.
Backslashes not within double-quoted text are treated reasonably, as
are multiple sequences of quoted text in a single data item. But it
still seems rather prone to misbehavior if the input is not completely
syntactically correct --- in particular, garbage following a right brace
will be ignored.
now has an RTE of its own, and references to its outputs now are Vars
referencing the JOIN RTE, rather than CASE-expressions. This allows
reverse-listing in ruleutils.c to use the correct alias easily, rather
than painfully reverse-engineering the alias namespace as it used to do.
Also, nested FULL JOINs work correctly, because the result of the inner
joins are simple Vars that the planner can cope with. This fixes a bug
reported a couple times now, notably by Tatsuo on 18-Nov-01. The alias
Vars are expanded into COALESCE expressions where needed at the very end
of planning, rather than during parsing.
Also, beginnings of support for showing plan qualifier expressions in
EXPLAIN. There are probably still cases that need work.
initdb forced due to change of stored-rule representation.
PostgreSQL. This hash function replaces the one used by hash indexes and
the catalog cache. Hash joins use a different, relatively poor-quality
hash function, but I'll fix that later.
As suggested by Tom Lane, this patch also changes the size of the fixed
hash table used by the catalog cache to be a power-of-2 (instead of a
prime: I chose 256 instead of 257). This allows the catcache to lookup
hash buckets using a simple bitmask. This should improve the performance
of the catalog cache slightly, since the previous method (modulo a
prime) was slow.
In my tests, this improves the performance of hash indexes by between 4%
and 8%; the performance when using btree indexes or seqscans is
basically unchanged.
Neil Conway <neilconway@rogers.com>
- domain.patch -> source patch against pgsql in cvs
- drop_domain.sgml and create_domain.sgml -> New doc/src/sgml/ref docs
- dominfo.txt -> basic domain related queries I used for testing
[ ADDED TO /doc]
Enables domains of array elements -> CREATE DOMAIN dom int4[3][2];
Uses a typbasetype column to describe the origin of the domain.
Copies data to attnotnull rather than processing in execMain().
Some documentation differences from earlier.
If this is approved, I'll start working on pg_dump, and a \dD <domain>
option in psql, and regression tests. I don't really feel like doing
those until the system table structure settles for pg_type.
CHECKS when added, will also be copied to to the table attributes. FK
Constraints (if I ever figure out how) will be done similarly. Both
will lbe handled by MergeDomainAttributes() which is called shortly
before MergeAttributes().
Rod Taylor
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
> > > > It was made to cope with encoding such as an Asian bloc in 7.2Beta2.
> > > >
> > > > Added ServerEncoding
> > > > Korean (JOHAB), Thai (WIN874),
> > > > Vietnamese (TCVN), Arabic (WIN1256)
> > > >
> > > > Added ClientEncoding
> > > > Simplified Chinese (GBK), Korean (UHC)
> > > >
> > > >
> > > >
> http://www.sankyo-unyu.co.jp/Pool/postgresql-7.2b2.newencoding.diff.tar.gz
> > > > (608K)
> > >
> > > Looks good. I need some people to review this for me.
> >
> > For me they look good too. The only missing part is a
> > documentation. I will ask him to write it up. If he couldn't, I will
> > do it for him.
> > > The diff is 3mb
> > > but appears to address only additions to multibyte. I have attached a
> > > list of files it modifies. Also, look at the sizes of the mb/
> > > directory. It is getting large:
> > >
> > > 4 ./CVS
> > > 6 ./Unicode/CVS
> > > 3433 ./Unicode
> > > 6197 .
> >
> > Yes. We definitely need the on-the-fly encoding addition capability:
> > i.e. CREATE CHRACTER SET in the future...
> > --
> > Tatsuo Ishii
> >
> >
Address chainge.
http://www.sankyo-unyu.co.jp/Pool/postgresql-7.2.newencoding.diff.gz
Add PsqlODBC and document ...etc patch.
Eiji Tokuya
(current as of a few hours ago.)
This patch:
1. Adds PG_GETARG_xxx_P_SLICE() macros and associated support routines.
2. Adds routines in src/backend/access/tuptoaster.c for fetching only
necessary chunks of a toasted value. (Modelled on latest changes to
assume chunks are returned in order).
3. Amends text_substr and bytea_substr to use new methods. It now
handles multibyte cases -and should still lead to a performance
improvement in the multibyte case where the substring is near the
beginning of the string.
4. Added new command: ALTER TABLE tabname ALTER COLUMN colname SET
STORAGE {PLAIN | EXTERNAL | EXTENDED | MAIN} to parser and documented in
alter-table.sgml. (NB I used ColId as the item type for the storage
mode string, rather than a new production - I hope this makes sense!).
All this does is sets attstorage for the specified column.
4. AlterTableAlterColumnStatistics is now AlterTableAlterColumnFlags and
handles both statistics and storage (it uses the subtype code to
distinguish). The previous version of my patch also re-arranged other
code in backend/commands/command.c but I have dropped that from this
patch.(I plan to return to it separately).
5. Documented new macros (and also the PG_GETARG_xxx_P_COPY macros) in
xfunc.sgml. ref/alter_table.sgml also contains documentation for ALTER
COLUMN SET STORAGE.
John Gray
timestamp/timestamptz combo. Now extract/date_part returns
seconds*1000 or 1000000 + fraction part as the manual stats.
regression test are also fixed.
See the thread in pgsql-hackers:
Subject: Re: [HACKERS] timestamp_part() bug?
Date: Sat, 02 Mar 2002 11:29:53 +0900
when to send what to which, prevent recursion by introducing new COMMERROR
elog level for client-communication problems, get rid of direct writes
to stderr in backend/libpq files, prevent non-error elogs from going to
client during the authentication cycle.
Thomas G. Lockhart
Tom Lane
Bruce Momjian
Tatsuo Ishii
Peter Eisentraut
Jan Wieck
Hiroshi Inoue