We've had multiple issues with the clause_is_computable_at logic that
I introduced in 2489d76c4: it's been known to accept more than one
clone of the same qual at the same plan node, and also to accept no
clones at all. It's looking impractical to get it 100% right on the
basis of the currently-stored information, so fix it by introducing a
new RestrictInfo field "incompatible_relids" that explicitly shows
which outer joins a given clone mustn't be pushed above.
In principle we could populate this field in every RestrictInfo, but
that would cost space and there doesn't presently seem to be a need
for it in general. Also, while deconstruct_distribute_oj_quals can
easily fill the field with the remaining members of the commutative
join set that it's considering, computing it in the general case
seems again pretty complicated. So for now, just fill it for
clone quals.
Along the way, fix a bug that may or may not be only latent:
equivclass.c was generating replacement clauses with is_pushed_down
and has_clone/is_clone markings that didn't match their
required_relids. This led me to conclude that leaving the clone flags
out of make_restrictinfo's purview wasn't such a great idea after all,
so add them.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs48EYi_9-pSd0ORes1kTmTeAjT4Q3gu49hJtYCbSn2JyeA@mail.gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
The idea of EvalPlanQual is that we replace the query's scan of the
result relation with a single injected tuple, and see if we get a
tuple out, thereby implying that the injected tuple still passes the
query quals. (In join cases, other relations in the query are still
scanned normally.) This logic was not updated when commit 86dc90056
made it possible for a single DML query plan to have multiple result
relations, when the query target relation has inheritance or partition
children. We replaced the output for the current result relation
successfully, but other result relations were still scanned normally;
thus, if any other result relation contained a tuple satisfying the
quals, we'd think the EPQ check passed, even if it did not pass for
the injected tuple itself. This would lead to update or delete
actions getting performed when they should have been skipped due to
a conflicting concurrent update in READ COMMITTED isolation mode.
Fix by blocking all sibling result relations from emitting tuples
during an EvalPlanQual recheck. In the back branches, the fix is
complicated a bit by the need to not change the size of struct
EPQState (else we'd have ABI-breaking changes in offsets in
struct ModifyTableState). Like the back-patches of 3f7836ff6
and 4b3e37993, add a separately palloc'd struct to avoid that.
The logic is the same as in HEAD otherwise.
This is only a live bug back to v14 where 86dc90056 came in.
However, I chose to back-patch the test cases further, on the
grounds that this whole area is none too well tested. I skipped
doing so in v11 though because none of the test applied cleanly,
and it didn't quite seem worth extra work for a branch with only
six months to live.
Per report from Ante Krešić (via Aleksander Alekseev)
Discussion: https://postgr.es/m/CAJ7c6TMBTN3rcz4=AjYhLPD_w3FFT0Wq_C15jxCDn8U4tZnH1g@mail.gmail.com
After applying outer-join identity 3 in the forward direction,
it was possible for the planner to mistakenly apply a qual clause
from above the two outer joins at the now-lower join level.
This can give the wrong answer, since a value that would get nulled
by the now-upper join might not yet be null.
To fix, when we perform such a transformation, consider that the
now-lower join hasn't really completed the outer join it's nominally
responsible for and thus its relid set should not include that OJ's
relid (nor should its output Vars have that nullingrel bit set).
Instead we add those bits when the now-upper join is performed.
The existing rules for qual placement then suffice to prevent
higher qual clauses from dropping below the now-upper join.
There are a few complications from needing to consider transitive
closures in case multiple pushdowns have happened, but all in all
it's not a very complex patch.
This is all new logic (from 2489d76c4) so no need to back-patch.
The added test cases all have the same results as in v15.
Tom Lane and Richard Guo
Discussion: https://postgr.es/m/0b819232-4b50-f245-1c7d-c8c61bf41827@postgrespro.ru
This is equivalent to a revert of f193883 and fb32748, with the addition
that the declaration of the SQLValueFunction node needs to gain a couple
of node_attr for query jumbling. The performance impact of removing the
function call inlining is proving to be too huge for some workloads
where these are used. A worst-case test case of involving only simple
SELECT queries with a SQL keyword is proving to lead to a reduction of
10% in TPS via pgbench and prepared queries on a high-end machine.
None of the tests I ran back for this set of changes saw such a huge
gap, but Alexander Lakhin and Andres Freund have found that this can be
noticeable. Keeping the older performance would mean to do more
inlining in the executor when using COERCE_SQL_SYNTAX for a function
expression, similarly to what SQLValueFunction does. This requires more
redesign work and there is little time until 16beta1 is released, so for
now reverting the change is the best way forward, bringing back the
previous performance.
Bump catalog version.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b32bed1b-0746-9b20-1472-4bdc9ca66d52@gmail.com
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
pg_stat_statements relies on EState->es_processed to count the number of
rows processed by ExecutorRun(). This proves to be a problem under the
extended query protocol when the result of a query is fetched through
more than one call of ExecutorRun(), as es_processed is reset each time
ExecutorRun() is called. This causes pg_stat_statements to report the
number of rows calculated in the last execute fetch, rather than the
global sum of all the rows processed.
As pquery.c tells, this is a problem when a portal does not use
holdStore. For example, DMLs with RETURNING would report a correct
tuple count as these do one execution cycle when the query is first
executed to fill in the portal's store with one ExecutorRun(), feeding
on the portal's store for each follow-up execute fetch depending on the
fetch size requested by the client.
The fix proposed for this issue is simple with the addition of an extra
counter in EState that's preserved across multiple ExecutorRun() calls,
incremented with the value calculated in es_processed. This approach is
not back-patchable, unfortunately.
Note that libpq does not currently give any way to control the fetch
size when using the extended v3 protocol, meaning that in-core testing
is not possible yet. This issue can be easily verified with the JDBC
driver, though, with *autocommit disabled*. Hence, having in-core tests
requires more features, left for future discussion:
- At least two new libpq routines splitting PQsendQueryGuts(), one for
the bind/describe and a second for a series of execute fetches with a
custom fetch size, likely in a fashion similar to what JDBC does.
- A psql meta-command for the execute phase. This part is not strictly
mandatory, still it could be handy.
Reported-by: Andrew Dunstan (original discovery by Simon Siggs)
Author: Sami Imseih
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/EBE6C507-9EB6-4142-9E4D-38B1673363A7@amazon.com
Discussion: https://postgr.es/m/c90890e7-9c89-c34f-d3c5-d5c763a34bd8@dunslane.net
Merge and hash joins can support antijoin with the non-nullable input
on the right, using very simple combinations of their existing logic
for right join and anti join. This gives the planner more freedom
about how to order the join. It's particularly useful for hash join,
since we may now have the option to hash the smaller table instead
of the larger.
Richard Guo, reviewed by Ronan Dunklau and myself
Discussion: https://postgr.es/m/CAMbWs48xh9hMzXzSy3VaPzGAz+fkxXXTUbCLohX1_L8THFRm2Q@mail.gmail.com
This patch introduces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON, as well as on the json and
jsonb types. Each test has IS and IS NOT variants and supports a WITH
UNIQUE KEYS flag. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
These should be self-explanatory.
The WITH UNIQUE KEYS flag makes these return false when duplicate keys
exist in any object within the value, not necessarily directly contained
in the outermost object.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
This commit introduces the SQL/JSON standard-conforming constructors for
JSON types:
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
Most of the functionality was already present in PostgreSQL-specific
functions, but these include some new functionality such as the ability
to skip or include NULL values, and to allow duplicate keys or throw
error when they are found, as well as the standard specified syntax to
specify output type and format.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
This adds the ability to pretty-print XML documents ... according to
libxml's somewhat idiosyncratic notions of what's pretty, anyway.
One notable divergence from a strict reading of the spec is that
libxml is willing to collapse empty nodes "<node></node>" to just
"<node/>", whereas SQL and the underlying XML spec say that this
option should only result in whitespace tweaks. Nonetheless,
it seems close enough to justify using the SQL-standard syntax.
Jim Jones, reviewed by Peter Smith and myself
Discussion: https://postgr.es/m/2f5df461-dad8-6d7d-4568-08e10608a69b@uni-muenster.de
There was apparently an attempt here to list all the object types that
ACL_USAGE applies to, but it wasn't complete. So instead of trying to
keep up, put in a more timeless comment.
Previously, all the nodes of CallStmt were included in the jumbling,
causing a duplicate in the computation as the transformed state of the
CALL query was included as well as the parsed state (transformed
FuncCall with all the input arguments and potential output arguments).
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
IntoClause.viewQuery is a copy of the parsed-but-not-rewritten SELECT
clause copied to IntoClause when transforming CreateTableAsStmt for a
materialized view. Including a second copy of the SELECT Query into the
query jumbling was leading to an incorrect numbering of the Const node
locations, as these would be counted twice instead of once.
This becomes visible once the query normalization is applied to CREATE
MATERIALIZED VIEW in pg_stat_statements in the shape of a query string
using only odd numbers for the normalized constants, (regression tests
added in pg_stat_statements as of de2aca2 would show the difference).
Including the original Query from CreateTableAsStmt is enough for the
query jumbling.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
If UPDATE is forced to retry after an EvalPlanQual check, it neglected
to repeat GENERATED-column computations, even though those might well
have changed since we're dealing with a different tuple than before.
Fixing this is mostly a matter of looping back a bit further when
we retry. In v15 and HEAD that's most easily done by altering the API
of ExecUpdateAct so that it includes computing GENERATED expressions.
Also, if an UPDATE in a partitioned table turns into a cross-partition
INSERT operation, we failed to recompute GENERATED columns. That's a
bug since 8bf6ec3ba allowed partitions to have different generation
expressions; although it seems to have no ill effects before that.
Fixing this is messier because we can now have situations where the same
query needs both the UPDATE-aligned set of GENERATED columns and the
INSERT-aligned set, and it's unclear which set will be generated first
(else we could hack things by forcing the INSERT-aligned set to be
generated, which is indeed how fe9e658f4 made it work for MERGE).
The best fix seems to be to build and store separate sets of expressions
for the INSERT and UPDATE cases. That would create ABI issues in the
back branches, but so far it seems we can leave this alone in the back
branches.
Per bug #17823 from Hisahiro Kauchi. The first part of this affects all
branches back to v12 where GENERATED columns were added.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
When I designed the Bitmapset module, I set things up so that an empty
Bitmapset could be represented either by a NULL pointer, or by an
allocated object all of whose bits are zero. I've recently come to
the conclusion that that was a bad idea and we should instead have a
convention like the longstanding invariant for Lists, whereby an empty
list is represented by NIL and nothing else.
To do this, we need to fix bms_intersect, bms_difference, and a couple
of other functions to check for having produced an empty result; but
then we can replace bms_is_empty(a) by a simple "a == NULL" test.
This is very likely a (marginal) win performance-wise, because we
call bms_is_empty many more times than those other functions put
together. However, the real reason to do it is that we have various
places that have hand-implemented a rule about "this Bitmapset
variable must be exactly NULL if empty", so that they can use
checks-for-null in place of bms_is_empty calls in particularly hot
code paths. That is a really fragile, mistake-prone way to do things,
and I'm surprised that we've seldom been bitten by it. It's not well
documented at all which variables have this property, so you can't
readily tell which code might be violating those conventions. By
making the convention universal, we can eliminate a subtle source of
bugs.
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us
nodeAppend.c used non-nullness of appendstate->as_valid_subplans as
a state flag to indicate whether it'd done ExecFindMatchingSubPlans
(or some sufficient approximation to that). This was pretty
questionable even in the beginning, since it wouldn't really work
right if there are no valid subplans. It got more questionable
after commit 27e1f1456 added logic that could reduce as_valid_subplans
to an empty set: at that point we were depending on unspecified
behavior of bms_del_members, namely that it'd not return an empty
set as NULL. It's about to start doing that, which breaks this
logic entirely. Hence, add a separate boolean flag to signal
whether as_valid_subplans has been computed.
Also fix a previously-cosmetic bug in nodeAgg.c, wherein it ignored
the return value of bms_del_member instead of updating its pointer.
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us
This function has been semi-deprecated ever since we invented
bms_next_member(). Its habit of scribbling on the input bitmapset
isn't great, plus for sufficiently large bitmapsets it would take
O(N^2) time to complete a loop. Now we have the additional problem
that reducing the input to empty while leaving it still accessible
would violate a planned invariant. So let's just get rid of it,
after updating the few extant callers to use bms_next_member().
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us
We already tried to fix this in commits 3f7323cbb et al (and follow-on
fixes), but now it emerges that there are still unfixed cases;
moreover, these cases affect all branches not only pre-v14. I thought
we had eliminated all cases of making multiple clones of an UPDATE's
target list when we nuked inheritance_planner. But it turns out we
still do that in some partitioned-UPDATE cases, notably including
INSERT ... ON CONFLICT UPDATE, because ExecInitPartitionInfo thinks
it's okay to clone and modify the parent's targetlist.
This fix is based on a suggestion from Andres Freund: let's stop
abusing the ParamExecData.execPlan mechanism, which was only ever
meant to handle initplans, and instead solve the execution timing
problem by having the expression compiler move MULTIEXPR_SUBLINK steps
to the front of their expression step lists. This is feasible because
(a) all branches still in support compile the entire targetlist of
an UPDATE into a single ExprState, and (b) we know that all
MULTIEXPR_SUBLINKs do need to be evaluated --- none could be buried
inside a CASE, for example. There is a minor semantics change
concerning the order of execution of the MULTIEXPR's subquery versus
other parts of the parent targetlist, but that seems like something
we can get away with. By doing that, we no longer need to worry
about whether different clones of a MULTIEXPR_SUBLINK share output
Params; their usage of that data structure won't overlap.
Per bug #17800 from Alexander Lakhin. Back-patch to all supported
branches. In v13 and earlier, we can revert 3f7323cbb and follow-on
fixes; however, I chose to keep the SubPlan.subLinkId field added
in ccbb54c72. We don't need that anymore in the core code, but it's
cheap enough to fill, and removing a plan node field in a minor
release seems like it'd be asking for trouble.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/17800-ff90866b3906c964@postgresql.org
In commit b78f6264e I opined that it was "too risky" to delete a
relation's RelOptInfo from the planner's data structures when we have
realized that we don't need to join to it; so instead we just marked
it as a dead relation. In hindsight that judgment seems flawed: any
subsequent access to such a dead relation is arguably a bug in
itself, so leaving the RelOptInfo present just helps to mask bugs.
Let's delete it instead, allowing removal of the whole notion of a
"dead relation". So far as the regression tests can find, this
requires no other code changes, except for one Assert in equivclass.c
that was very dubiously not complaining about access to a dead rel.
Discussion: https://postgr.es/m/229905.1676062220@sss.pgh.pa.us
This commit removes most of the Plan and Path nodes, which should never
be included in the query jumbling because we ignore these in Query
nodes. This is facilitated by making no_query_jumble an inherited
attribute, like no_copy, no_equal and no_read when the supertype of a
node is found as marked with that.
RawStmt is not used in parsed queries, so it can be removed from the
query jumbling. A couple of nodes defined in pathnodes.h, plannodes.h
and primnodes.h with NodeTag as supertype need to be marked
individually.
Forcing the execution of the query jumbling code with compute_query_id =
auto while pg_stat_statements is loaded brings the code coverage of
queryjumblefuncs.funcs.c to 95.6%.
The core code does not yet include a way to enforce the execution in
query jumbling except in pg_stat_statements, so the numbers I am
mentioning above will not reflect on the default coverage report with
just what is done in this commit.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3344827.1675809127@sss.pgh.pa.us
Like the implementation for node copy, write and read, this node
requires a custom implementation so as the query jumbling is able to
consider the correct value assigned to it, depending on its type (int,
float, bool, string, bitstring).
Based on a dump of pg_stat_statements from the regression database, this
would confuse the query jumbling of the following queries:
- SET.
- COPY TO with SELECT queries.
- START TRANSACTION with different isolation levels.
- ALTER TABLE with default expressions.
- CREATE TABLE with partition bounds.
Note that there may be a long-term argument in tracking the location of
such nodes so as query strings holding such nodes could be normalized,
but this is left as a separate discussion.
Oversight in 3db72eb.
Discussion: https://postgr.es/m/Y9+HuYslMAP6yyPb@paquier.xyz
Here remove some dead code from heapgettup() and heapgettup_pagemode()
which was trying to support NoMovementScanDirection scans. This code can
never be reached as standard_ExecutorRun() never calls ExecutePlan with
NoMovementScanDirection.
Additionally, plans which were scanning an unordered index would use
NoMovementScanDirection rather than ForwardScanDirection. There was no
real need for this, so here we adjust this so we use ForwardScanDirection
for unordered index scans. A comment in pathnodes.h claimed that
NoMovementScanDirection was used for PathKey reasons, but if that was
true, it no longer is, per code in build_index_paths().
This does change the non-text format of the EXPLAIN output so that
unordered index scans now have a "Forward" scan direction rather than
"NoMovement". The text format of EXPLAIN has not changed.
Author: Melanie Plageman
Reviewed-by: Tom Lane, David Rowley
Discussion: https://postgr.es/m/CAAKRu_bvkhka0CZQun28KTqhuUh5ZqY=_T8QEqZqOL02rpi2bw@mail.gmail.com
This commit changes the query jumbling code in queryjumblefuncs.c to be
generated automatically based on the information of the nodes in the
headers of src/include/nodes/ by using gen_node_support.pl. This
approach offers many advantages:
- Support for query jumbling for all the utility statements, based on the
state of their parsed Nodes and not only their query string. This will
greatly ease the switch to normalize the information of some DDLs, like
SET or CALL for example (this is left unchanged and should be part of a
separate discussion). With this feature, the number of entries stored
for utilities in pg_stat_statements is reduced (for example now
"CHECKPOINT" and "checkpoint" mean the same thing with the same query
ID).
- Documentation of query jumbling directly in the structure definition
of the nodes. Since this code has been introduced in pg_stat_statements
and then moved to code, the reasons behind the choices of what should be
included in the jumble are rather sparse. Note that some explanation is
added for the most relevant parts, as a start.
- Overall code reduction and more consistency with the other parts
generating read, write and copy depending on the nodes.
The query jumbling is controlled by a couple of new node attributes,
documented in nodes/nodes.h:
- custom_query_jumble, to mark a Node as having a custom
implementation.
- no_query_jumble, to ignore entirely a Node.
- query_jumble_ignore, to ignore a field in a Node.
- query_jumble_location, to mark a location in a Node, for
normalization. This can apply only to int fields, with "location" in
their name (only Const as of this commit).
There should be no compatibility impact on pg_stat_statements, as the
new code applies the jumbling to the same fields for each node (its
regression tests have no modification, for one).
Some benchmark of the query jumbling between HEAD and this commit for
SELECT and DMLs has proved that this new code does not cause a
performance regression, with computation times close for both methods.
For utility queries, the new method is slower than the previous method
of calculating a hash of the query string, though we are talking about
extra ns-level changes based on what I measured, which is unnoticeable
even for OLTP workloads as a query ID is calculated once per query
post-parse analysis.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
EquivalenceClasses are now understood as applying within a "join
domain", which is a set of inner-joined relations (possibly underneath
an outer join). We no longer need to treat an EC from below an outer
join as a second-class citizen.
I have hopes of eventually being able to treat outer-join clauses via
EquivalenceClasses, by means of only applying deductions within the
EC's join domain. There are still problems in the way of that, though,
so for now the reconsider_outer_join_clause logic is still here.
I haven't been able to get rid of RestrictInfo.is_pushed_down either,
but I wonder if that could be recast using JoinDomains.
I had to hack one test case in postgres_fdw.sql to make it still test
what it was meant to, because postgres_fdw is inconsistent about
how it deals with quals containing non-shippable expressions; see
https://postgr.es/m/1691374.1671659838@sss.pgh.pa.us. That should
be improved, but I don't think it's within the scope of this patch
series.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Remove RestrictInfo.nullable_relids, along with a good deal of
infrastructure that calculated it. One use-case for it was in
join_clause_is_movable_to, but we can now replace that usage with
a check to see if the clause's relids include any outer join
that can null the target relation. The other use-case was in
join_clause_is_movable_into, but that test can just be dropped
entirely now that the clause's relids include outer joins.
Furthermore, join_clause_is_movable_into should now be
accurate enough that it will accept anything returned by
generate_join_implied_equalities, so we can restore the Assert
that was diked out in commit 95f4e59c3.
Remove the outerjoin_delayed mechanism. We needed this before to
prevent quals from getting evaluated below outer joins that should
null some of their vars. Now that we consider varnullingrels while
placing quals, that's taken care of automatically, so throw the
whole thing away.
Teach remove_useless_result_rtes to also remove useless FromExprs.
Having done that, the delay_upper_joins flag serves no purpose any
more and we can remove it, largely reverting 11086f2f2.
Use constant TRUE for "dummy" clauses when throwing back outer joins.
This improves on a hack I introduced in commit 6a6522529. If we
have a left-join clause l.x = r.y, and a WHERE clause l.x = constant,
we generate r.y = constant and then don't really have a need for the
join clause. But we must throw the join clause back anyway after
marking it redundant, so that the join search heuristics won't think
this is a clauseless join and avoid it. That was a kluge introduced
under time pressure, and after looking at it I thought of a better
way: let's just introduce constant-TRUE "join clauses" instead,
and get rid of them at the end. This improves the generated plans for
such cases by not having to test a redundant join clause. We can also
get rid of the ugly hack used to mark such clauses as redundant for
selectivity estimation.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Traditionally we used the same Var struct to represent the value
of a table column everywhere in parse and plan trees. This choice
predates our support for SQL outer joins, and it's really a pretty
bad idea with outer joins, because the Var's value can depend on
where it is in the tree: it might go to NULL above an outer join.
So expression nodes that are equal() per equalfuncs.c might not
represent the same value, which is a huge correctness hazard for
the planner.
To improve this, decorate Var nodes with a bitmapset showing
which outer joins (identified by RTE indexes) may have nulled
them at the point in the parse tree where the Var appears.
This allows us to trust that equal() Vars represent the same value.
A certain amount of klugery is still needed to cope with cases
where we re-order two outer joins, but it's possible to make it
work without sacrificing that core principle. PlaceHolderVars
receive similar decoration for the same reason.
In the planner, we include these outer join bitmapsets into the relids
that an expression is considered to depend on, and in consequence also
add outer-join relids to the relids of join RelOptInfos. This allows
us to correctly perceive whether an expression can be calculated above
or below a particular outer join.
This change affects FDWs that want to plan foreign joins. They *must*
follow suit when labeling foreign joins in order to match with the
core planner, but for many purposes (if postgres_fdw is any guide)
they'd prefer to consider only base relations within the join.
To support both requirements, redefine ForeignScan.fs_relids as
base+OJ relids, and add a new field fs_base_relids that's set up by
the core planner.
Large though it is, this commit just does the minimum necessary to
install the new mechanisms and get check-world passing again.
Follow-up patches will perform some cleanup. (The README additions
and comments mention some stuff that will appear in the follow-up.)
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Historically we skipped writing/reading this field, but that no
longer works under WRITE_READ_PARSE_PLAN_TREES since we expanded
the coverage of that option to include utility commands (787102b56).
Remove the special case and just treat this field normally.
Bump catversion out of an abundance of caution --- I do not think
we currently ever store RangeVar nodes in the catalogs, but
perhaps I'm wrong.
Per report from Pavel Stehule.
Discussion: https://postgr.es/m/CAFj8pRAYvYu-qU7-NieqRRyaQZk-yr3UjtHQ2LR62PS9M1dZMA@mail.gmail.com
This is similar to 835d476, except that this one is to add node
attributes related to query jumbling and avoid long lines in the headers
and in the node structures changed by this commit.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
This will ease a follow-up move that will generate automatically this
code. The C file is renamed, for consistency with the node-related
files whose code are generated by gen_node_support.pl:
- queryjumble.c -> queryjumblefuncs.c
- utils/queryjumble.h -> nodes/queryjumble.h
Per a suggestion from Peter Eisentraut.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
This is a second attempt at committing 1b4d280ea. The difference
from the first time is that now we can add some filtering rules to
AdjustUpgrade.pm to allow cross-version upgrade testing to pass
despite all the cosmetic changes in CREATE VIEW outputs.
Amit Langote (filtering rules by me)
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
Avoid explicitly grouping by columns that we know are redundant
for sorting, for example we need group by only one of x and y in
SELECT ... WHERE x = y GROUP BY x, y
This comes up more often than you might think, as shown by the
changes in the regression tests. It's nearly free to detect too,
since we are just piggybacking on the existing logic that detects
redundant pathkeys. (In some of the existing plans that change,
it's visible that a sort step preceding the grouping step already
didn't bother to sort by the redundant column, making the old plan
a bit silly-looking.)
To do this, build processed_groupClause and processed_distinctClause
lists that omit any provably-redundant sort items, and consult those
not the originals where relevant. This means that within the
planner, one should usually consult root->processed_groupClause or
root->processed_distinctClause if one wants to know which columns
are to be grouped on; but to check whether grouping or distinct-ing
is happening at all, check non-NIL-ness of parse->groupClause or
parse->distinctClause. This is comparable to longstanding rules
about handling the HAVING clause, so I don't think it'll be a huge
maintenance problem.
nodeAgg.c also needs minor mods, because it's now possible to generate
AGG_PLAIN and AGG_SORTED Agg nodes with zero grouping columns.
Patch by me; thanks to Richard Guo and David Rowley for review.
Discussion: https://postgr.es/m/185315.1672179489@sss.pgh.pa.us
This reverts commit 1b4d280ea1.
It's broken the buildfarm members that run cross-version-upgrade tests,
because they're not prepared to deal with cosmetic differences between
CREATE VIEW commands emitted by older servers and HEAD. Even if we had
a solution to that, which we don't, it'd take some time to roll it out
to the affected animals. This improvement isn't valuable enough to
justify addressing that problem on an emergency basis, so revert it
for now.
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
This allows left join removals and unique joins to work with partitioned
tables. The planner just lacked sufficient proofs that a given join
would not cause any row duplication. Unique indexes currently serve as
that proof, so have get_relation_info() populate the indexlist for
partitioned tables too.
Author: Arne Roland
Reviewed-by: Alvaro Herrera, Zhihong Yu, Amit Langote, David Rowley
Discussion: https://postgr.es/m/c3b2408b7a39433b8230bbcd02e9f302@index.de
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
WindowFuncs such as row_number() don't care if it's called with ROWS
UNBOUNDED PRECEDING AND CURRENT ROW or with RANGE UNBOUNDED PRECEDING AND
CURRENT ROW. The latter is less efficient as the RANGE option requires
that the executor check for peer rows, so using the ROW option instead
would cause less overhead. Because RANGE is part of the default frame
options for WindowClauses, it means WindowAgg is, by default, working much
harder than it needs to for window functions where the ROWS / RANGE option
has no effect on the window function's result.
On a test query from the discussion thread, a performance improvement of
344% was seen by using ROWS instead of RANGE.
Here we add a new support function node type to allow support functions to
be called for window functions so that the most optimal version of the
frame options can be set. The planner has been adjusted so that the frame
options are changed only if all window functions sharing the same window
clause agree on what the optimized frame options are.
Here we give the ability for row_number(), rank(), dense_rank(),
percent_rank(), cume_dist() and ntile() to alter their WindowClause's
frameOptions.
Reviewed-by: Vik Fearing, Erwin Brandstetter, Zhihong Yu
Discussion: https://postgr.es/m/CAGHENJ7LBBszxS+SkWWFVnBmOT2oVsBhDMB1DFrgerCeYa_DyA@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvohAKEtTXxq7Pc-ic2dKT8oZfbRKeEJP64M0B6+S88z+A@mail.gmail.com
During ALTER TABLE execution, when prep-time handling of subcommands of
certain types determine that execution-time handling requires recursion,
they signal this by changing the subcommand type to a special value.
This can be done in a simpler way by using a separate flag introduced by
commit ec0925c22a, so do that.
Catversion bumped. It's not clear to me that ALTER TABLE subcommands
are stored anywhere in catalogs (CREATE FUNCTION rejects it in BEGIN
ATOMIC function bodies), but we do have both write and read support for
them, so be safe.
Discussion: https://postgr.es/m/20220929090033.zxuaezcdwh2fgfjb@alvherre.pgsql
