Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
For Updates and Deletes, we were not honoring the columns list for old
tuple values while sending tuple data via pgoutput. This results in
pgoutput emitting more columns than expected.
This is not a problem for built-in logical replication as we simply ignore
additional columns based on the relation information sent previously which
didn't have those columns. However, some other users of pgoutput plugin
may expect the columns as per the column list. Also, sending extra columns
unnecessarily consumes network bandwidth defeating the purpose of the
column list feature.
Reported-by: Gunnar Morling
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Backpatch-through: 15
Discussion: https://postgr.es/m/CADGJaX9kiRZ-OH0EpWF5Fkyh1ZZYofoNRCrhapBfdk02tj5EKg@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
This feature adds row filtering for publication tables. When a publication
is defined or modified, an optional WHERE clause can be specified. Rows
that don't satisfy this WHERE clause will be filtered out. This allows a
set of tables to be partially replicated. The row filter is per table. A
new row filter can be added simply by specifying a WHERE clause after the
table name. The WHERE clause must be enclosed by parentheses.
The row filter WHERE clause for a table added to a publication that
publishes UPDATE and/or DELETE operations must contain only columns that
are covered by REPLICA IDENTITY. The row filter WHERE clause for a table
added to a publication that publishes INSERT can use any column. If the
row filter evaluates to NULL, it is regarded as "false". The WHERE clause
only allows simple expressions that don't have user-defined functions,
user-defined operators, user-defined types, user-defined collations,
non-immutable built-in functions, or references to system columns. These
restrictions could be addressed in the future.
If you choose to do the initial table synchronization, only data that
satisfies the row filters is copied to the subscriber. If the subscription
has several publications in which a table has been published with
different WHERE clauses, rows that satisfy ANY of the expressions will be
copied. If a subscriber is a pre-15 version, the initial table
synchronization won't use row filters even if they are defined in the
publisher.
The row filters are applied before publishing the changes. If the
subscription has several publications in which the same table has been
published with different filters (for the same publish operation), those
expressions get OR'ed together so that rows satisfying any of the
expressions will be replicated.
This means all the other filters become redundant if (a) one of the
publications have no filter at all, (b) one of the publications was
created using FOR ALL TABLES, (c) one of the publications was created
using FOR ALL TABLES IN SCHEMA and the table belongs to that same schema.
If your publication contains a partitioned table, the publication
parameter publish_via_partition_root determines if it uses the partition's
row filter (if the parameter is false, the default) or the root
partitioned table's row filter.
Psql commands \dRp+ and \d <table-name> will display any row filters.
Author: Hou Zhijie, Euler Taveira, Peter Smith, Ajin Cherian
Reviewed-by: Greg Nancarrow, Haiying Tang, Amit Kapila, Tomas Vondra, Dilip Kumar, Vignesh C, Alvaro Herrera, Andres Freund, Wei Wang
Discussion: https://www.postgresql.org/message-id/flat/CAHE3wggb715X%2BmK_DitLXF25B%3DjE6xyNCH4YOwM860JR7HarGQ%40mail.gmail.com
Previously, on the subscriber, we set the error context callback for the
tuple data conversion failures. This commit replaces the existing error
context callback with a comprehensive one so that it shows not only the
details of data conversion failures but also the details of logical change
being applied by the apply worker or table sync worker. The additional
information displayed will be the command, transaction id, and timestamp.
The error context is added to an error only when applying a change but not
while doing other work like receiving data etc.
This will help users in diagnosing the problems that occur during logical
replication. It also can be used for future work that allows skipping a
particular transaction on the subscriber.
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Greg Nancarrow, Haiying Tang, Amit Kapila
Tested-by: Haiying Tang
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
In the code, most places used the term "Stream Stop" for the logical
stream message. This commit improves consistency by renaming LogicalRepMsgType
"LOGICAL_REP_MSG_STREAM_END" to "LOGICAL_REP_MSG_STREAM_STOP".
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Commit a8fd13cab0 added support for prepared transactions to built-in
logical replication via a new option "two_phase" for a subscription. The
"two_phase" option was not allowed with the existing streaming option.
This commit permits the combination of "streaming" and "two_phase"
subscription options. It extends the pgoutput plugin and the subscriber
side code to add the prepare API for streaming transactions which will
apply the changes accumulated in the spool-file at prepare time.
Author: Peter Smith and Ajin Cherian
Reviewed-by: Vignesh C, Amit Kapila, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().
Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.
Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Logical replication protocol uses a single byte character to identify a
message type in logical replication protocol. The code uses string
literals for the same. Use Enum so that
1. All the string literals used can be found at a single place. This
makes it easy to add more types without the risk of conflicts.
2. It's easy to locate the code handling a given message type.
3. When used with switch statements, it is easy to identify the missing
cases using -Wswitch.
Author: Ashutosh Bapat
Reviewed-by: Kyotaro Horiguchi, Andres Freund, Peter Smith and Amit Kapila
Discussion: https://postgr.es/m/CAExHW5uPzQ7L0oAd_ENyvaiYMOPgkrAoJpE+ZY5-obdcVT6NPg@mail.gmail.com
Commit 464824323e changed the logical replication protocol to allow the
streaming of in-progress transactions and used the new version of protocol
irrespective of the server version. Use the appropriate version of the
protocol based on the server version.
Reported-by: Ashutosh Sharma
Author: Dilip Kumar
Reviewed-by: Ashutosh Sharma and Amit Kapila
Discussion: https://postgr.es/m/CAE9k0P=9OpXcNrcU5Gsvd5MZ8GFpiN833vNHzX6Uc=8+h1ft1Q@mail.gmail.com
To add support for streaming of in-progress transactions into the
built-in logical replication, we need to do three things:
* Extend the logical replication protocol, so identify in-progress
transactions, and allow adding additional bits of information (e.g.
XID of subtransactions).
* Modify the output plugin (pgoutput) to implement the new stream
API callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle streamed
in-progress transaction by spilling the data to disk and then
replaying them on commit.
We however must explicitly disable streaming replication during
replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover we don't have a replication connection open so we
don't have where to send the data anyway.
Author: Tomas Vondra, Dilip Kumar and Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Commit b9c130a1f failed to apply the publisher-to-subscriber column
mapping while checking which columns were updated. Perhaps less
significantly, it didn't exclude dropped columns either. This could
result in an incorrect updated-columns bitmap and thus wrong decisions
about whether to fire column-specific triggers on the subscriber while
applying updates. In HEAD (since commit 9de77b545), it could also
result in accesses off the end of the colstatus array, as detected by
buildfarm member skink. Fix the logic, and adjust 003_constraints.pl
so that the problem is exposed in unpatched code.
In HEAD, also add some assertions to check that we don't access off
the ends of these newly variable-sized arrays.
Back-patch to v10, as b9c130a1f was.
Discussion: https://postgr.es/m/CAH2-Wz=79hKQ4++c5A060RYbjTHgiYTHz=fw6mptCtgghH2gJA@mail.gmail.com
This patch adds a "binary" option to CREATE/ALTER SUBSCRIPTION.
When that's set, the publisher will send data using the data type's
typsend function if any, rather than typoutput. This is generally
faster, if slightly less robust.
As committed, we won't try to transfer user-defined array or composite
types in binary, for fear that type OIDs won't match at the subscriber.
This might be changed later, but it seems like fit material for a
follow-on patch.
Dave Cramer, reviewed by Daniel Gustafsson, Petr Jelinek, and others;
adjusted some by me
Discussion: https://postgr.es/m/CADK3HH+R3xMn=8t3Ct+uD+qJ1KD=Hbif5NFMJ+d5DkoCzp6Vgw@mail.gmail.com
This by itself doesn't change any functionality but prepares the way
for having relations other than base tables in publications.
Make arrangements for COPY handling the initial table sync. For
non-tables we have to use COPY (SELECT ...) instead of directly
copying from the table, but then we have to take care to omit
generated columns from the column list.
Also, remove a hardcoded reference to relkind = 'r' and rely on the
publisher to send only what it can actually publish, which will be
correct even in future cross-version scenarios.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
The logical replication type map seems to have been misused by its only
caller -- it would try to use the remote OID as input for local type
routines, which unsurprisingly could result in bogus "cache lookup
failed for type XYZ" errors, or random other type names being picked up
if they happened to use the right OID. Fix that, changing
Oid logicalrep_typmap_getid(Oid remoteid) to
char *logicalrep_typmap_gettypname(Oid remoteid)
which is more useful. If the remote type is not part of the typmap,
this simply prints "unrecognized type" instead of choking trying to
figure out -- a pointless exercise (because the only input for that
comes from replication messages, which are not under the local node's
control) and dangerous to boot, when called from within an error context
callback.
Once that is done, it comes to light that the local OID in the typmap
entry was not being used for anything; the type/schema names are what we
need, so remove local type OID from that struct.
Once you do that, it becomes pointless to attach a callback to regular
syscache invalidation. So remove that also.
Reported-by: Dang Minh Huong
Author: Masahiko Sawada
Reviewed-by: Álvaro Herrera, Petr Jelínek, Dang Minh Huong, Atsushi Torikoshi
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A6BE964@BPXM05GP.gisp.nec.co.jp
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A6C4B0A@BPXM05GP.gisp.nec.co.jp
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
Amit Kapila
Bruce Momjian
Peter Geoghegan
Tomas Vondra
Michael Paquier
Tom Lane
Peter Eisentraut
Peter Eisentraut
Alvaro Herrera