IANA got rid of the really silly "abbreviation" and replaced it with one
that's only moderately silly. But it's still pointless, so keep on not
showing it.
When a relation is truncated, it is important that the FSM is truncated as
well. Otherwise, after recovery, the FSM can return a page that has been
truncated away, leading to errors like:
ERROR: could not read block 28991 in file "base/16390/572026": read only 0
of 8192 bytes
We were using MarkBufferDirtyHint() to dirty the buffer holding the last
remaining page of the FSM, but during recovery, that might in fact not
dirty the page, and the FSM update might be lost.
To fix, use the stronger MarkBufferDirty() function. MarkBufferDirty()
requires us to do WAL-logging ourselves, to protect from a torn page, if
checksumming is enabled.
Also fix an oversight in visibilitymap_truncate: it also needs to WAL-log
when checksumming is enabled.
Analysis by Pavan Deolasee.
Discussion: <CABOikdNr5vKucqyZH9s1Mh0XebLs_jRhKv6eJfNnD2wxTn=_9A@mail.gmail.com>
CommandId is declared as uint32, and values up to 4G are indeed legal.
cidout() handles them properly by treating the value as unsigned int.
But cidin() was just using atoi(), which has platform-dependent behavior
for values outside the range of signed int, as reported by Bart Lengkeek
in bug #14379. Use strtoul() instead, as xidin() does.
In passing, make some purely cosmetic changes to make xidin/xidout
look more like cidin/cidout; the former didn't have a monopoly on
best practice IMO.
Neither xidin nor cidin make any attempt to throw error for invalid input.
I didn't change that here, and am not sure it's worth worrying about
since neither is really a user-facing type. The point is just to ensure
that indubitably-valid inputs work as expected.
It's been like this for a long time, so back-patch to all supported
branches.
Report: <20161018152550.1413.6439@wrigleys.postgresql.org>
This reverts commit 9e083fd468. That was a
few bricks shy of a load:
* Query cancel stopped working
* Buildfarm member pademelon stopped working, because the box doesn't have
/dev/urandom nor /dev/random.
This clearly needs some more discussion, and a quite different patch, so
revert for now.
This value might not be to everyone's taste; in particular, some
people might prefer %t to %m, and others may want %u, %d, or other
fields. However, it's a vast improvement on the old default of ''.
Christoph Berg
Have tuplesort_gettupleslot() copy the contents of its current table slot
as needed. This is based on an approach taken by tuplestore_gettupleslot().
In the future, tuplesort_gettupleslot() may also be taught to avoid copying
the tuple where caller can determine that that is safe (the
tuplestore_gettupleslot() interface already offers this option to callers).
Patch by Peter Geoghegan. Fixes bug #14344, reported by Regina Obe.
Report: <20160929035538.20224.39628@wrigleys.postgresql.org>
Backpatch-through: 9.6
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
- /dev/random
Original patch by Magnus Hagander, with further work by Michael Paquier
and me.
Discussion: <CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com>
The more efficient hashtable speeds up hash-aggregations with more than
a few hundred groups significantly. Improvements of over 120% have been
measured.
Due to the the different hash table queries that not fully
determined (e.g. GROUP BY without ORDER BY) may change their result
order.
The conversion is largely straight-forward, except that, due to the
static element types of simplehash.h type hashes, the additional data
some users store in elements (e.g. the per-group working data for hash
aggregaters) is now stored in TupleHashEntryData->additional. The
meaning of BuildTupleHashTable's entrysize (renamed to additionalsize)
has been changed to only be about the additionally stored size. That
size is only used for the initial sizing of the hash-table.
Reviewed-By: Tomas Vondra
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
Use the new simplehash.h to speed up tidbitmap.c uses. For bitmap scan
heavy queries speedups of over 100% have been measured. Both lossy and
exact scans benefit, but the wins are bigger for mostly exact scans.
The conversion is mostly trivial, except that tbm_lossify() now restarts
lossifying at the point it previously stopped. Otherwise the hash table
becomes unbalanced because the scan in done in hash-order, leaving the
end of the hashtable more densely filled then the beginning. That caused
performance issues with dynahash as well, but due to the open chaining
they were less pronounced than with the linear adressing from
simplehash.h.
Reviewed-By: Tomas Vondra
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
bitshiftright() and bitshiftleft() would recursively call each other
infinitely if the user passed INT_MIN for the shift amount, due to integer
overflow in negating the shift amount. To fix, clamp to -VARBITMAXLEN.
That doesn't change the results since any shift distance larger than the
input bit string's length produces an all-zeroes result.
Also fix some places that seemed inadequately paranoid about input typmods
exceeding VARBITMAXLEN. While a typmod accepted by anybit_typmodin() will
certainly be much less than that, at least some of these spots are
reachable with user-chosen integer values.
Andreas Seltenreich and Tom Lane
Discussion: <87d1j2zqtz.fsf@credativ.de>
pgstat_twophase_postcommit is supposed to duplicate the math in
AtEOXact_PgStat, but it had missed out the bit about clearing
t_delta_live_tuples/t_delta_dead_tuples for a TRUNCATE.
It's harder than you might think to replicate the issue here, because
those counters would only be nonzero when a previous transaction in
the same backend had added/deleted tuples in the truncated table,
and those counts hadn't been sent to the stats collector yet.
Evident oversight in commit d42358efb. I've not added a regression
test for this; we tried to add one in d42358efb, and had to revert it
because it was too timing-sensitive for the buildfarm.
Back-patch to 9.5 where d42358efb came in.
Stas Kelvich
Discussion: <EB57BF68-C06D-4737-BDDC-4BA778F4E62B@postgrespro.ru>
It's not good for an inherited child constraint to be marked connoinherit;
that would result in the constraint not propagating to grandchild tables,
if any are created later. The code mostly prevented this from happening
but there was one case that was missed.
This is somewhat related to commit e55a946a8, which also tightened checks
on constraint merging. Hence, back-patch to 9.2 like that one. This isn't
so much because there's a concrete feature-related reason to stop there,
as to avoid having more distinct behaviors than we have to in this area.
Amit Langote
Discussion: <b28ee774-7009-313d-dd55-5bdd81242c41@lab.ntt.co.jp>
Even if Linux's mmap() is okay with a partial-hugepage request, munmap()
is not, as reported by Chris Richards. Therefore it behooves us to try
a bit harder to find out the actual hugepage size, instead of assuming
that we can skate by with a guess.
For the moment, just look into /proc/meminfo to find out the default
hugepage size, and use that. Later, on kernels that support requests
for nondefault sizes, we might try to consider other alternatives.
But that smells more like a new feature than a bug fix, especially if
we want to provide any way for the DBA to control it, so leave it for
another day.
I set this up to allow easy addition of platform-specific code for
non-Linux platforms, if needed; but right now there are no reports
suggesting that we need to work harder on other platforms.
Back-patch to 9.4 where hugepage support was introduced.
Discussion: <31056.1476303954@sss.pgh.pa.us>
Fix detaching of the mmap'd segment to have its own on_shmem_exit callback,
rather than piggybacking on the one for detaching from the SysV segment.
That was confusing, and given the distance between the two attach calls,
it was trouble waiting to happen.
Make the detaching calls idempotent by clearing AnonymousShmem to show
we've already unmapped. I spent quite a bit of time yesterday trying
to find a path that would allow the munmap()'s to be done twice, and
while I did not succeed, it seems silly that there's even a question.
Make the #ifdef logic less confusing by separating "do we want to use
anonymous shmem" from EXEC_BACKEND. Even though there's no current
scenario where those conditions are different, it is not helpful for
different places in the same file to be testing EXEC_BACKEND for what
are fundamentally different reasons.
Don't do on_exit_reset() in StartBackgroundWorker(). At best that's
useless (InitPostmasterChild would have done it already) and at worst
it could zap some callback that's unrelated to shared memory.
Improve comments, and simplify the huge_pages enablement logic slightly.
Back-patch to 9.4 where hugepage support was introduced.
Arguably this should go into 9.3 as well, but the code looks
significantly different there, and I doubt it's worth the
trouble of adapting the patch given I can't show a live bug.
Commit 0b62fd036 did a fairly sloppy job of refactoring setPath()
to support jsonb_insert() along with jsonb_set(). In its defense,
though, there was no regression test case exercising the case of
replacing an existing element in a jsonb array.
Per bug #14366 from Peng Sun. Back-patch to 9.6 where bug was introduced.
Report: <20161012065349.1412.47858@wrigleys.postgresql.org>
These functions were originally added in commit d8cedf67a to support
use of int2vector columns as catcache lookup keys. However, there are
no catcaches that use such columns. (Indeed I now think it must always
have been dead code: a catcache with such a key column would need an
underlying unique index on the column, but we've never had an int2vector
btree opclass.)
Getting rid of the int2vector-specific operator and function does not
lose any functionality, because operations on int2vectors will now fall
back to the generic anyarray support. This avoids a wart that a btree
index on an int2vector column (made using anyarray_ops) would fail to
match equality searches, because int2vectoreq wasn't a member of the
opclass. We don't really care much about that, since int2vector is not
meant as a type for users to use, but it's silly to have extra code and
less functionality.
If we ever do want a catcache to be indexed by an int2vector column,
we'd need to put back full btree and hash opclasses for int2vector,
comparable to the support for oidvector. (The anyarray code can't be
used at such a low level, because it needs to do catcache lookups.)
But we'll deal with that if/when the need arises.
Also worth noting is that removal of the hash int2vector_ops opclass will
break any user-created hash indexes on int2vector columns. While hash
anyarray_ops would serve the same purpose, it would probably not compute
the same hash values and thus wouldn't be on-disk-compatible. Given that
int2vector isn't a user-facing type and we're planning other incompatible
changes in hash indexes for v10 anyway, this doesn't seem like something
to worry about, but it's probably worth mentioning here.
Amit Langote
Discussion: <d9bb74f8-b194-7307-9ebd-90645d377e45@lab.ntt.co.jp>
Pass the buffer size as argument to LogicalTapeRewindForRead, rather than
setting it earlier with the separate LogicTapeAssignReadBufferSize call.
This way, the buffer size is set closer to where it's actually used, which
makes the code easier to understand.
This makes the calculation for how much memory to use for the buffers less
precise. We now use the same amount of memory for every tape, rounded down
to the nearest BLCKSZ boundary, instead of using one more block for some
tapes, to get the total up to exact amount of memory available. That should
be OK, merging isn't too sensitive to the exact amount of memory used.
Reviewed by Peter Geoghegan
Discussion: <0f607c4b-df23-353e-bf56-c0389d28495f@iki.fi>
While this isn't a lot of code, it's been essentially untestable for
a very long time, because libpq doesn't support anything older than
protocol 2.0, and has not since release 6.3. There's no reason to
believe any other client-side code still uses that protocol, either.
Discussion: <2661.1475849167@sss.pgh.pa.us>
SCO OpenServer and SCO UnixWare are more or less dead platforms.
We have never had a buildfarm member testing the "sco" port, and
the last "unixware" member was last heard from in 2012, so it's
fair to doubt that the code even compiles anymore on either one.
Remove both ports. We can always undo this if someone shows up
with an interest in maintaining and testing these platforms.
Discussion: <17177.1476136994@sss.pgh.pa.us>
The transfunction was told that its first argument and result were
of the window function output type, not the aggregate state type.
This'd only matter if the transfunction consults get_fn_expr_argtype,
which typically only polymorphic functions would do.
Although we have several regression tests around polymorphic aggs,
none of them detected this mistake --- in fact, they still didn't
fail when I injected the same mistake into nodeAgg.c. So add some
more tests covering both plain agg and window-function-agg cases.
Per report from Sebastian Luque. Back-patch to 9.6 where the error
was introduced (by sloppy refactoring in commit 804163bc2, looks like).
Report: <87int2qkat.fsf@gmail.com>
Historically, we've allowed users to add a CHECK constraint to a child
table and then add an identical CHECK constraint to the parent. This
results in "merging" the two constraints so that the pre-existing
child constraint ends up with both conislocal = true and coninhcount > 0.
However, if you tried to do it in the other order, you got a duplicate
constraint error. This is problematic for pg_dump, which needs to issue
separated ADD CONSTRAINT commands in some cases, but has no good way to
ensure that the constraints will be added in the required order.
And it's more than a bit arbitrary, too. The goal of complaining about
duplicated ADD CONSTRAINT commands can be served if we reject the case of
adding a constraint when the existing one already has conislocal = true;
but if it has conislocal = false, let's just make the ADD CONSTRAINT set
conislocal = true. In this way, either order of adding the constraints
has the same end result.
Another problem was that the code allowed creation of a parent constraint
marked convalidated that is merged with a child constraint that is
!convalidated. In this case, an inheritance scan of the parent table could
emit some rows violating the constraint condition, which would be an
unexpected result given the marking of the parent constraint as validated.
Hence, forbid merging of constraints in this case. (Note: valid child and
not-valid parent seems fine, so continue to allow that.)
Per report from Benedikt Grundmann. Back-patch to 9.2 where we introduced
possibly-not-valid check constraints. The second bug obviously doesn't
apply before that, and I think the first doesn't either, because pg_dump
only gets into this situation when dealing with not-valid constraints.
Report: <CADbMkNPT-Jz5PRSQ4RbUASYAjocV_KHUWapR%2Bg8fNvhUAyRpxA%40mail.gmail.com>
Discussion: <22108.1475874586@sss.pgh.pa.us>
The need for this was previously obscured even on picky platforms
by the hack we used to support direct cross-module references in
the transforms contrib modules. Now that that hack is gone, the
undefined symbol is exposed, as reported by Robert Haas.
Back-patch to 9.5 where we started to use -Wl,-undefined,dynamic_lookup.
I'm a bit surprised that the older branches don't seem to contain
any gettext references in this module, but since they don't fail
at build time, they must not. (We might be able to get away with
leaving this alone in 9.5/9.6, but I think it's cleaner if the
reference gets resolved at link time.)
Report: <CA+TgmoaHJKU5kcWZcYduATYVT7Mnx+8jUnycaYYL7OtCwCigug@mail.gmail.com>
I somehow had assumed that in the spinlock (in turn possibly using
semaphores) based fallback atomics implementation 32 bit writes could be
done without a lock. As far as the write goes that's correct, since
postgres supports only platforms with single-copy atomicity for aligned
32bit writes. But writing without holding the spinlock breaks
read-modify-write operations like pg_atomic_compare_exchange_u32(),
since they'll potentially "miss" a concurrent write, which can't happen
in actual hardware implementations.
In 9.6+ when using the fallback atomics implementation this could lead
to buffer header locks not being properly marked as released, and
potentially some related state corruption. I don't see a related danger
in 9.5 (earliest release with the API), because pg_atomic_write_u32()
wasn't used in a concurrent manner there.
The state variable of local buffers, before this change, were
manipulated using pg_atomic_write_u32(), to avoid unnecessary
synchronization overhead. As that'd not be the case anymore, introduce
and use pg_atomic_unlocked_write_u32(), which does not correctly
interact with RMW operations.
This bug only caused issues when postgres is compiled on platforms
without atomics support (i.e. no common new platform), or when compiled
with --disable-atomics, which explains why this wasn't noticed in
testing.
Reported-By: Tom Lane
Discussion: <14947.1475690465@sss.pgh.pa.us>
Backpatch: 9.5-, where the atomic operations API was introduced.
0xc19c is not a valid UTF-8 byte sequence. It doesn't do any harm, AFAICS,
but it's surely not intentional. No backpatching though, just to be sure.
In the passing, also add a file header comment to the file, like the
UCS_to_SJIS.pl script would produce. (The file was originally created with
UCS_to_SJIS.pl, but has been modified by hand since then. That's
questionable, but I'll leave fixing that for later.)
Kyotaro Horiguchi
Discussion: <20160907.155050.233844095.horiguchi.kyotaro@lab.ntt.co.jp>
LogicalTapeRewind() should not allocate large read buffer, if the tape
is completely empty. The calling code relies on that, for its
calculation of how much memory to allocate for the read buffers. That
lead to massive overallocation of memory, if maxTapes was high, but
only a few tapes were actually used.
Reported by Tomas Vondra
Discussion: <7303da46-daf7-9c68-3cc1-9f83235cf37e@2ndquadrant.com>
Windows apparently has a constant named WAIT_TIMEOUT, and some of these
other names are pretty generic, too. Insert "PG_" at the front of each
name in order to disambiguate.
Michael Paquier
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
Before initializing iteration over a subtransaction's changes, the last
few changes were not spilled to disk. That's correct if the transaction
didn't spill to disk, but otherwise... This bug can lead to missed or
misorderd subtransaction contents when they were spilled to disk.
Move spilling of the remaining in-memory changes to
ReorderBufferIterTXNInit(), where it can easily be applied to the top
transaction and, if present, subtransactions.
Since this code had too many bugs already, noticeably increase test
coverage.
Fixes: #14319
Reported-By: Huan Ruan
Discussion: <20160909012610.20024.58169@wrigleys.postgresql.org>
Backport: 9,4-, where logical decoding was added
Commit 88e982302 invented GUC_UNIT_XSEGS for min_wal_size and max_wal_size,
but neglected to make it display sensibly in pg_settings.unit (by adding a
case to the switch in GetConfigOptionByNum). Fix that, and adjust said
switch to throw a run-time error the next time somebody forgets.
In passing, avoid using a static buffer for the output string --- the rest
of this function pstrdup's from a local buffer, and I see no very good
reason why the units code should do it differently and less safely.
Per report from Otar Shavadze. Back-patch to 9.5 where the new unit type
was added.
Report: <CAG-jOyA=iNFhN+yB4vfvqh688B7Tr5SArbYcFUAjZi=0Exp-Lg@mail.gmail.com>
Attempting to COPY a subset of columns from a table with RLS enabled
would fail due to an invalid query being constructed (using a single
ColumnRef with the list of fields to exact in 'fields', but that's for
the different levels of an indirection for a single column, not for
specifying multiple columns).
Correct by building a ColumnRef and then RestTarget for each column
being requested and then adding those to the targetList for the select
query. Include regression tests to hopefully catch if this is broken
again in the future.
Patch-By: Adam Brightwell
Reviewed-By: Michael Paquier
Don't pre-read tuples into SortTuple slots during merge. Instead, use the
memory for larger read buffers in logtape.c. We're doing the same number
of READTUP() calls either way, but managing the pre-read SortTuple slots
is much more complicated. Also, the on-tape representation is more compact
than SortTuples, so we can fit more pre-read tuples into the same amount
of memory this way. And we have better cache-locality, when we use just a
small number of SortTuple slots.
Now that we only hold one tuple from each tape in the SortTuple slots, we
can greatly simplify the "batch memory" management. We now maintain a
small set of fixed-sized slots, to hold the tuples, and fall back to
palloc() for larger tuples. We use this method during all merge phases,
not just the final merge, and also when randomAccess is requested, and
also in the TSS_SORTEDONTAPE case. In other words, it's used whenever we
do an external sort.
Reviewed by Peter Geoghegan and Claudio Freire.
Discussion: <CAM3SWZTpaORV=yQGVCG8Q4axcZ3MvF-05xe39ZvORdU9JcD6hQ@mail.gmail.com>
Without this, an extension containing an access method is not properly
dumped/restored during pg_upgrade --- the AM ends up not being a member
of the extension after upgrading.
Another oversight in commit 473b93287, reported by Andrew Dunstan.
Report: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>
In standard Unix builds, postmaster child processes do ClosePostmasterPorts
immediately after InitPostmasterChild, that is almost immediately after
being spawned. This is important because we don't want children holding
open the postmaster's end of the postmaster death watch pipe.
However, in EXEC_BACKEND builds, SubPostmasterMain was postponing this
responsibility significantly, in order to make it slightly more convenient
to pass the right flag value to ClosePostmasterPorts. This is bad,
particularly seeing that process_shared_preload_libraries() might invoke
nearly-arbitrary code. Rearrange so that we do it as soon as we've
fetched the socket FDs via read_backend_variables().
Also move the comment explaining about randomize_va_space to before the
call of PGSharedMemoryReAttach, which is where it's relevant. The old
placement was appropriate when the reattach happened inside
CreateSharedMemoryAndSemaphores, but that was a long time ago.
Back-patch to 9.3; the patch doesn't apply cleanly before that, and
it doesn't seem worth a lot of effort given that we've had no actual
field complaints traceable to this.
Discussion: <4157.1475178360@sss.pgh.pa.us>
The list of files and directories that pg_basebackup excludes from the
backup was somewhat incomplete and unorganized. Change that with having
the exclusion driven from tables. Clean up some code around it. Also
document the exclusions in more detail so that users of pg_start_backup
can make use of it as well.
The contents of these directories are now excluded from the backup:
pg_dynshmem, pg_notify, pg_serial, pg_snapshots, pg_subtrans
Also fix a bug that a pg_repl_slot or pg_stat_tmp being a symlink would
cause a corrupt tar header to be created. Now such symlinks are
included in the backup as empty directories. Bug found by Ashutosh
Sharma <ashu.coek88@gmail.com>.
From: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Add a validity flag to DCHCacheEntry and NUMCacheEntry entries, and
do not set it true until after we've parsed the supplied format string.
This allows dealing with possible errors while parsing the format
without the baroque hack that was there before (which only covered
errors within NUMDesc_prepare, anyway). We can get rid of the PG_TRY in
NUMDesc_prepare, as well as last_NUMCacheEntry and NUM_cache_remove.
(Essentially, this reverts commit ff783fbae in favor of a less fragile
solution; the problems with that approach are well illustrated by later
hacking such as 55f927a46.)
In passing, define the size of these caches as DCH_CACHE_ENTRIES not
DCH_CACHE_FIELDS + 1 (whoever thought that was a good definition?)
and likewise for the NUM cache. Also const-ify format string parameters
where convenient, and merge duplicated cache lookup logic.
This is primarily driven by a proposed patch from Artur Zakirov,
which introduced some ereport's into format string parsing for
the datetime case. He proposed preventing the creation of invalid
cache entries by parsing the format string first into a local-variable
array, and then copying that to a cache entry. That seemed a bit
ugly to me, and anyway randomly different from the way the identical
problem had been solved for the numeric case. Let's make the two
sets of code more similar not less so.
I'm not sure whether we'll adopt the new error conditions Artur proposes,
but this patch seems like good code cleanup and future-proofing in any
case. The existing code is critically (and undocumented-ly) dependent on
no elog being thrown out of several nontrivial functions, which is trouble
waiting to happen, though it doesn't seem to be actively broken today.
Discussion: <b2a39359-3282-b402-f4a3-057aae500ee7@postgrespro.ru>
Historically, something like to_date('2009-06-40','YYYY-MM-DD') would
return '2009-07-10' because there was no prohibition on out-of-range
month or day numbers. This has been widely panned, and it also turns
out that Oracle throws an error in such cases. Since these functions
are nominally Oracle-compatibility features, let's change that.
There's no particular restriction on year (modulo the fact that the
scanner may not believe that more than 4 digits are year digits,
a matter to be addressed separately if at all). But we now check month,
day, hour, minute, second, and fractional-second fields, as well as
day-of-year and second-of-day fields if those are used.
Currently, no checks are made on ISO-8601-style week numbers or day
numbers; it's not very clear what the appropriate rules would be there,
and they're probably so little used that it's not worth sweating over.
Artur Zakirov, reviewed by Amul Sul, further adjustments by me
Discussion: <1873520224.1784572.1465833145330.JavaMail.yahoo@mail.yahoo.com>
See-Also: <57786490.9010201@wars-nicht.de>
The previous patch broke this by returning NULL for a failed CRC check,
which pg_controldata would then try to read. Fix by returning the
result of the CRC check in a separate argument.
Michael Paquier and myself
Commit 3fe3511d05 introduced a new
case into this function, but neglected to ensure that the "ondisk"
pointer got updated after a possible reallocation as the code does
in other cases.
Stas Kelvich, per diagnosis by Konstantin Knizhnik.
This makes the parameter easier to extend, to support other password-based
authentication protocols than MD5. (SCRAM is being worked on.)
The GUC still accepts on/off as aliases for "md5" and "plain", although
we may want to remove those once we actually add support for another
password hash type.
Michael Paquier, reviewed by David Steele, with some further edits by me.
Discussion: <CAB7nPqSMXU35g=W9X74HVeQp0uvgJxvYOuA4A-A3M+0wfEBv-w@mail.gmail.com>
Pushing an upper-level restriction clause into an unflattened
subquery-in-FROM is okay when the subquery contains no SRFs in its
targetlist, or when it does but the SRFs are unreferenced by the clause
*and the clause is not volatile*. Otherwise, we're changing the number
of times the clause is evaluated, which is bad for volatile quals, and
possibly changing the result, since a volatile qual might succeed for some
SRF output rows and not others despite not referencing any of the changing
columns. (Indeed, if the clause is something like "random() > 0.5", the
user is probably expecting exactly that behavior.)
We had most of these restrictions down, but not the one about the upper
clause not being volatile. Fix that, and add a regression test to
illustrate the expected behavior.
Although this is definitely a bug, it doesn't seem like back-patch
material, since possibly some users don't realize that the broken
behavior is broken and are relying on what happens now. Also, while
the added test is quite cheap in the wake of commit a4c35ea1c, it would
be much more expensive (or else messier) in older branches.
Per report from Tom van Tilburg.
Discussion: <CAP3PPDiucxYCNev52=YPVkrQAPVF1C5PFWnrQPT7iMzO1fiKFQ@mail.gmail.com>
Tom Lane
Peter Eisentraut
Heikki Linnakangas
Robert Haas
Andres Freund
Stephen Frost
Alvaro Herrera