The transfunction was told that its first argument and result were
of the window function output type, not the aggregate state type.
This'd only matter if the transfunction consults get_fn_expr_argtype,
which typically only polymorphic functions would do.
Although we have several regression tests around polymorphic aggs,
none of them detected this mistake --- in fact, they still didn't
fail when I injected the same mistake into nodeAgg.c. So add some
more tests covering both plain agg and window-function-agg cases.
Per report from Sebastian Luque. Back-patch to 9.6 where the error
was introduced (by sloppy refactoring in commit 804163bc2, looks like).
Report: <87int2qkat.fsf@gmail.com>
Historically, we've allowed users to add a CHECK constraint to a child
table and then add an identical CHECK constraint to the parent. This
results in "merging" the two constraints so that the pre-existing
child constraint ends up with both conislocal = true and coninhcount > 0.
However, if you tried to do it in the other order, you got a duplicate
constraint error. This is problematic for pg_dump, which needs to issue
separated ADD CONSTRAINT commands in some cases, but has no good way to
ensure that the constraints will be added in the required order.
And it's more than a bit arbitrary, too. The goal of complaining about
duplicated ADD CONSTRAINT commands can be served if we reject the case of
adding a constraint when the existing one already has conislocal = true;
but if it has conislocal = false, let's just make the ADD CONSTRAINT set
conislocal = true. In this way, either order of adding the constraints
has the same end result.
Another problem was that the code allowed creation of a parent constraint
marked convalidated that is merged with a child constraint that is
!convalidated. In this case, an inheritance scan of the parent table could
emit some rows violating the constraint condition, which would be an
unexpected result given the marking of the parent constraint as validated.
Hence, forbid merging of constraints in this case. (Note: valid child and
not-valid parent seems fine, so continue to allow that.)
Per report from Benedikt Grundmann. Back-patch to 9.2 where we introduced
possibly-not-valid check constraints. The second bug obviously doesn't
apply before that, and I think the first doesn't either, because pg_dump
only gets into this situation when dealing with not-valid constraints.
Report: <CADbMkNPT-Jz5PRSQ4RbUASYAjocV_KHUWapR%2Bg8fNvhUAyRpxA%40mail.gmail.com>
Discussion: <22108.1475874586@sss.pgh.pa.us>
There were several issues with the old coding:
1. There was a race condition, if two threads opened a connection at the
same time. We used a mutex around SSL_CTX_* calls, but that was not
enough, e.g. if one thread SSL_CTX_load_verify_locations() with one
path, and another thread set it with a different path, before the first
thread got to establish the connection.
2. Opening two different connections, with different sslrootcert settings,
seemed to fail outright with "SSL error: block type is not 01". Not sure
why.
3. We created the SSL object, before calling SSL_CTX_load_verify_locations
and SSL_CTX_use_certificate_chain_file on the SSL context. That was
wrong, because the options set on the SSL context are propagated to the
SSL object, when the SSL object is created. If they are set after the
SSL object has already been created, they won't take effect until the
next connection. (This is bug #14329)
At least some of these could've been fixed while still using a shared
context, but it would've been more complicated and error-prone. To keep
things simple, let's just use a separate SSL context for each connection,
and accept the overhead.
Backpatch to all supported versions.
Report, analysis and test case by Kacper Zuk.
Discussion: <20160920101051.1355.79453@wrigleys.postgresql.org>
Windows apparently has a constant named WAIT_TIMEOUT, and some of these
other names are pretty generic, too. Insert "PG_" at the front of each
name in order to disambiguate.
Michael Paquier
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
Attempting to COPY a subset of columns from a table with RLS enabled
would fail due to an invalid query being constructed (using a single
ColumnRef with the list of fields to exact in 'fields', but that's for
the different levels of an indirection for a single column, not for
specifying multiple columns).
Correct by building a ColumnRef and then RestTarget for each column
being requested and then adding those to the targetList for the select
query. Include regression tests to hopefully catch if this is broken
again in the future.
Patch-By: Adam Brightwell
Reviewed-By: Michael Paquier
The sequence "configure; cd src/pl/plpython; make -j" failed due to
trying to compile plpython's .o files before the generated headers
finished building. (This is an important real-world case, since it's
the typical second step when building both plpython2 and plpython3.)
This happens because the submake-generated-headers target is not
placed in a way to make it a prerequisite to compiling the .o files.
Fix that.
Checking other uses of submake-generated-headers, I noted that the one
attached to pg_regress was similarly misplaced; but it's actually not
needed at all for pg_regress.o, rather regress.o, so move it to be a
prerequisite of that.
Back-patch to 9.6 where submake-generated-headers was introduced
(by commit 548af97fc). It's not immediately clear to me why the
previous coding didn't have the same issue; but since we've not
had field reports of plpython make failing, leave it alone in the
older branches.
Pavel Raiskup and Tom Lane
Discussion: <1925924.izSMJEZO3x@unused-4-107.brq.redhat.com>
Before pg_regress runs psql, set the application name to the test name.
Similarly, set the application name to the test file name in the TAP
tests. Also, set a default log_line_prefix that show the application
name, as well as the PID and a time stamp.
That way, the server log output can be correlated to the test input
files, making debugging a bit easier.
Historically, something like to_date('2009-06-40','YYYY-MM-DD') would
return '2009-07-10' because there was no prohibition on out-of-range
month or day numbers. This has been widely panned, and it also turns
out that Oracle throws an error in such cases. Since these functions
are nominally Oracle-compatibility features, let's change that.
There's no particular restriction on year (modulo the fact that the
scanner may not believe that more than 4 digits are year digits,
a matter to be addressed separately if at all). But we now check month,
day, hour, minute, second, and fractional-second fields, as well as
day-of-year and second-of-day fields if those are used.
Currently, no checks are made on ISO-8601-style week numbers or day
numbers; it's not very clear what the appropriate rules would be there,
and they're probably so little used that it's not worth sweating over.
Artur Zakirov, reviewed by Amul Sul, further adjustments by me
Discussion: <1873520224.1784572.1465833145330.JavaMail.yahoo@mail.yahoo.com>
See-Also: <57786490.9010201@wars-nicht.de>
Pushing an upper-level restriction clause into an unflattened
subquery-in-FROM is okay when the subquery contains no SRFs in its
targetlist, or when it does but the SRFs are unreferenced by the clause
*and the clause is not volatile*. Otherwise, we're changing the number
of times the clause is evaluated, which is bad for volatile quals, and
possibly changing the result, since a volatile qual might succeed for some
SRF output rows and not others despite not referencing any of the changing
columns. (Indeed, if the clause is something like "random() > 0.5", the
user is probably expecting exactly that behavior.)
We had most of these restrictions down, but not the one about the upper
clause not being volatile. Fix that, and add a regression test to
illustrate the expected behavior.
Although this is definitely a bug, it doesn't seem like back-patch
material, since possibly some users don't realize that the broken
behavior is broken and are relying on what happens now. Also, while
the added test is quite cheap in the wake of commit a4c35ea1c, it would
be much more expensive (or else messier) in older branches.
Per report from Tom van Tilburg.
Discussion: <CAP3PPDiucxYCNev52=YPVkrQAPVF1C5PFWnrQPT7iMzO1fiKFQ@mail.gmail.com>
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
When configured with --enable-tap-tests, "make install" will now install
the Perl support files for TAP testing where PGXS will find them.
This allows extensions to rely on $(prove_check) even when being built
out-of-tree. Back-patch to 9.4 where we first started to support TAP
testing, to reduce the number of cases extension makefiles need to
consider.
Craig Ringer
Discussion: <CAMsr+YFXv+2qne6xJW7z_25mYBtktRX5rpkrgrb+DRgQ_FxgHQ@mail.gmail.com>
ExecInitCteScan supposed that it didn't have to do anything to the extra
tuplestore read pointer it gets from tuplestore_alloc_read_pointer.
However, it needs this read pointer to be positioned at the start of the
tuplestore, while tuplestore_alloc_read_pointer is actually defined as
cloning the current position of read pointer 0. In normal situations
that accidentally works because we initialize the whole plan tree at once,
before anything gets read. But it fails in an EvalPlanQual recheck, as
illustrated in bug #14328 from Dima Pavlov. To fix, just forcibly rewind
the pointer after tuplestore_alloc_read_pointer. The cost of doing so is
negligible unless the tuplestore is already in TSS_READFILE state, which
wouldn't happen in normal cases. We could consider altering tuplestore's
API to make that case cheaper, but that would make for a more invasive
back-patch and it doesn't seem worth it.
This has been broken probably for as long as we've had CTEs, so back-patch
to all supported branches.
Discussion: <32468.1474548308@sss.pgh.pa.us>
Add tests for consistent support of connection strings in frontend
programs as well as proper handling of unusual characters in database
and user names. These tests were developed for the issues of
CVE-2016-5424.
To allow testing of names with spaces, change the pg_regress
command-line options --create-role and --dbname to split their arguments
by comma only, not space or comma as before. Only commas were actually
used in existing uses.
Noah Misch, Michael Paquier, Peter Eisentraut
Consistently print the test name, not the full command, which can be
quite lenghty and include temporary directory names and other
distracting details.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to all supported branches, per popular demand. In back-branches,
we still support OpenSSL 0.9.7 and above. OpenSSL 0.9.6 should still work
too, but I didn't test it. In master, we only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
The money type input function did not have any overflow checks at all.
There were some regression tests that purported to check for overflow,
but they actually checked for the overflow behavior of the int8 type
before casting to money. Remove those unnecessary checks and add some
that actually check the money input function.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Teach the parser to reject misplaced set-returning functions during parse
analysis using p_expr_kind, in much the same way as we do for aggregates
and window functions (cf commit eaccfded9). While this isn't complete
(it misses nesting-based restrictions), it's much better than the previous
error reporting for such cases, and it allows elimination of assorted
ad-hoc expression_returns_set() error checks. We could add nesting checks
later if it seems important to catch all cases at parse time.
There is one case the parser will now throw error for although previous
versions allowed it, which is SRFs in the tlist of an UPDATE. That never
behaved sensibly (since it's ill-defined which generated row should be
used to perform the update) and it's hard to see why it should not be
treated as an error. It's a release-note-worthy change though.
Also, add a new Query field hasTargetSRFs reporting whether there are
any SRFs in the targetlist (including GROUP BY/ORDER BY expressions).
The parser can now set that basically for free during parse analysis,
and we can use it in a number of places to avoid expression_returns_set
searches. (There will be more such checks soon.) In some places, this
allows decontorting the logic since it's no longer expensive to check for
SRFs in the tlist --- so I made the checks parallel to the handling of
hasAggs/hasWindowFuncs wherever it seemed appropriate.
catversion bump because adding a Query field changes stored rules.
Andres Freund and Tom Lane
Discussion: <24639.1473782855@sss.pgh.pa.us>
The output of the function changes whenever previous (or, as in this
case, concurrent) tests leave a table in place. That causes unneeded
churn.
This should fix failures due to the tests added bfe16d1a5, like on
lapwing, caused by the tsrf test running concurrently with misc. Those
could also have been addressed by using temp tables, but that test has
annoyed me before.
Discussion: <27626.1473729905@sss.pgh.pa.us>
We're considering changing the implementation of targetlist SRFs
considerably, and a lot of the current behaviour isn't tested in our
regression tests. Thus it seems useful to increase coverage to avoid
accidental behaviour changes.
It's quite possible that some of the plans here will require adjustments
to avoid falling afoul of ordering differences (e.g. hashed group
bys). The buildfarm will tell us.
Reviewed-By: Tom Lane
Discussion: <20160827214829.zo2dfb5jaikii5nw@alap3.anarazel.de>
When heap_lock_tuple decides to follow the update chain, it tried to
also lock any version of the tuple that was created by an update that
was subsequently rolled back. This is pointless, since for all intents
and purposes that tuple exists no more; and moreover it causes
misbehavior, as reported independently by Marko Tiikkaja and Marti
Raudsepp: some SELECT FOR UPDATE/SHARE queries may fail to return
the tuples, and assertion-enabled builds crash.
Fix by having heap_lock_updated_tuple test the xmin and return success
immediately if the tuple was created by an aborted transaction.
The condition where tuples become invisible occurs when an updated tuple
chain is followed by heap_lock_updated_tuple, which reports the problem
as HeapTupleSelfUpdated to its caller heap_lock_tuple, which in turn
propagates that code outwards possibly leading the calling code
(ExecLockRows) to believe that the tuple exists no longer.
Backpatch to 9.3. Only on 9.5 and newer this leads to a visible
failure, because of commit 27846f02c176; before that, heap_lock_tuple
skips the whole dance when the tuple is already locked by the same
transaction, because of the ancient HeapTupleSatisfiesUpdate behavior.
Still, the buggy condition may also exist in more convoluted scenarios
involving concurrent transactions, so it seems safer to fix the bug in
the old branches too.
Discussion:
https://www.postgresql.org/message-id/CABRT9RC81YUf1=jsmWopcKJEro=VoeG2ou6sPwyOUTx_qteRsg@mail.gmail.comhttps://www.postgresql.org/message-id/48d3eade-98d3-8b9a-477e-1a8dc32a724d@joh.to
commit_ts and test_pg_dump were declaring targets before including the
PGXS stanza, which meant that the "all" target customarily defined as
the first (and therefore default target) was not the default anymore.
Fix that by moving those target definitions to after PGXS.
commit_ts was initially good, but I broke it in commit 9def031bd2;
test_pg_dump was born broken, probably copying from commit_ts' mistake.
In passing, fix a comment mistake in test_pg_dump/Makefile.
Backpatch to 9.6.
Noted by Tom Lane.
Previously, if a schema was created by an extension, a normal pg_dump run
(not --binary-upgrade) would summarily skip every object in that schema.
In a case where an extension creates a schema and then users create other
objects within that schema, this does the wrong thing: we want pg_dump
to skip the schema but still create the non-extension-owned objects.
There's no easy way to fix this pre-9.6, because in earlier versions the
"dump" status for a schema is just a bool and there's no way to distinguish
"dump me" from "dump my members". However, as of 9.6 we do have enough
state to represent that, so this is a simple correction of the logic in
selectDumpableNamespace.
In passing, make some cosmetic fixes in nearby code.
Martín Marqués, reviewed by Michael Paquier
Discussion: <99581032-71de-6466-c325-069861f1947d@2ndquadrant.com>
Not much to be said about this patch: it does what it says on the tin.
In passing, rename AlterEnumStmt.skipIfExists to skipIfNewValExists
to clarify what it actually does. In the discussion of this patch
we considered supporting other similar options, such as IF EXISTS
on the type as a whole or IF NOT EXISTS on the target name. This
patch doesn't actually add any such feature, but it might happen later.
Dagfinn Ilmari Mannsåker, reviewed by Emre Hasegeli
Discussion: <CAO=2mx6uvgPaPDf-rHqG8=1MZnGyVDMQeh8zS4euRyyg4D35OQ@mail.gmail.com>
Previously, we failed to recognize Unicode characters above U+7FF as
being members of locale-dependent character classes such as [[:alpha:]].
(Actually, the same problem occurs for large pg_wchar values in any
multibyte encoding, but UTF8 is the only case people have actually
complained about.) It's impractical to get Spencer's original code to
handle character classes or ranges containing many thousands of characters,
because it insists on considering each member character individually at
regex compile time, whether or not the character will ever be of interest
at run time. To fix, choose a cutoff point MAX_SIMPLE_CHR below which
we process characters individually as before, and deal with entire ranges
or classes as single entities above that. We can actually make things
cheaper than before for chars below the cutoff, because the color map can
now be a simple linear array for those chars, rather than the multilevel
tree structure Spencer designed. It's more expensive than before for
chars above the cutoff, because we must do a binary search in a list of
high chars and char ranges used in the regex pattern, plus call iswalpha()
and friends for each locale-dependent character class used in the pattern.
However, multibyte encodings are normally designed to give smaller codes
to popular characters, so that we can expect that the slow path will be
taken relatively infrequently. In any case, the speed penalty appears
minor except when we have to apply iswalpha() etc. to high character codes
at runtime --- and the previous coding gave wrong answers for those cases,
so whether it was faster is moot.
Tom Lane, reviewed by Heikki Linnakangas
Discussion: <15563.1471913698@sss.pgh.pa.us>
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Andrew Dunstan and Tom Lane
Discussion: <4075.1459088427@sss.pgh.pa.us>
When pg_logical_slot_get_changes(...) sets confirmed_flush_lsn to the point at
which replay stopped, it doesn't dirty the replication slot. So if the replay
didn't cause restart_lsn or catalog_xmin to change as well, this change will
not get written out to disk. Even on a clean shutdown.
If Pg crashes or restarts, a subsequent pg_logical_slot_get_changes(...) call
will see the same changes already replayed since it uses the slot's
confirmed_flush_lsn as the start point for fetching changes. The caller can't
specify a start LSN when using the SQL interface.
Mark the slot as dirty after reading changes using the SQL interface so that
users won't see repeated changes after a clean shutdown. Repeated changes still
occur when using the walsender interface or after an unclean shutdown.
Craig Ringer
After further reflection about the mess cleaned up in commit 39b691f25,
I decided the main bit of test coverage that was still missing was to
check that the non-default abbreviation-set files we supply are usable.
Add that.
Back-patch to supported branches, just because it seems like a good
idea to keep this all in sync.
split_to_stringlist() doesn't modify its first argument nor expect it
to remain valid after exit, so there's no need to duplicate the optarg
string at the call sites. Per Coverity. (This has been wrong all along,
but commit 052cc223d changed the useless calls from "strdup" to
"pg_strdup", which apparently made Coverity think it's a new bug.
It's not, but it's also not worth back-patching.)
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
This introduces a numeric sum accumulator, which performs better than
repeatedly calling add_var(). The performance comes from using wider digits
and delaying carry propagation, tallying positive and negative values
separately, and avoiding a round of palloc/pfree on every value. This
speeds up SUM(), as well as other standard aggregates like AVG() and
STDDEV() that also calculate a sum internally.
Reviewed-by: Andrey Borodin
Discussion: <c0545351-a467-5b76-6d46-4840d1ea8aa4@iki.fi>
Where possible, use palloc or pg_malloc instead; otherwise, insert
explicit NULL checks.
Generally speaking, these are places where an actual OOM is quite
unlikely, either because they're in client programs that don't
allocate all that much, or they're very early in process startup
so that we'd likely have had a fork() failure instead. Hence,
no back-patch, even though this is nominally a bug fix.
Michael Paquier, with some adjustments by me
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>
Commit f0c7b789a added a test case in case.sql that creates and then drops
both an '=' operator and the type it's for. Given the right timing, that
can cause a "cache lookup failed for type" failure in concurrent sessions,
which see the '=' operator as a potential match for '=' in a query, but
then the type is gone by the time they inquire into its properties.
It might be nice to make that behavior more robust someday, but as a
back-patchable solution, adjust the new test case so that the operator
is never visible to other sessions. Like the previous commit, back-patch
to all supported branches.
Discussion: <5983.1471371667@sss.pgh.pa.us>
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
This seems to offer significantly better search performance than the
existing GiST opclass for inet/cidr, at least on data with a wide mix
of network mask lengths. (That may suggest that the data splitting
heuristics in the GiST opclass could be improved.)
Emre Hasegeli, with mostly-cosmetic adjustments by me
Discussion: <CAE2gYzxtth9qatW_OAqdOjykS0bxq7AYHLuyAQLPgT7H9ZU0Cw@mail.gmail.com>
Add a variant of txid_current() that returns NULL if no transaction ID
is assigned. This version can be used even on a standby server,
although it will always return NULL since no transaction IDs can be
assigned during recovery.
Craig Ringer, per suggestion from Jim Nasby. Reviewed by Petr Jelinek
and by me.
Remove the plpgsql wrapping that hides the context. So now the test
will fail if the work doesn't actually happen in a parallel worker. Run
the test in its own test group to ensure it won't run out of resources
for that.
In particular, left join to pg_authid so that rows in pg_stat_activity
don't disappear if the session's owning user has been dropped.
Also convert a few joins to pg_database to left joins, in the same spirit,
though that case might be harder to hit. We were doing this in other
views already, so it was a bit inconsistent that these views didn't.
Oskari Saarenmaa, with some further tweaking by me
Discussion: <56E87CD8.60007@ohmu.fi>
On some buildfarm animals the isolationtest added in 07ef0351 failed, as
the order in which processes are run after unlocking is not
guaranteed. Add an alternative output for that.
Discussion: <7969.1471484738@sss.pgh.pa.us>
Backpatch: 9.6, like the test in the aforementioned commit
INSERT .. ON CONFLICT runs a pre-check of the possible conflicting
constraints before performing the actual speculative insertion. In case
the inserted tuple included TOASTed columns the ON CONFLICT condition
would be handled correctly in case the conflict was caught by the
pre-check, but if two transactions entered the speculative insertion
phase at the same time, one would have to re-try, and the code for
aborting a speculative insertion did not handle deleting the
speculatively inserted TOAST datums correctly.
TOAST deletion would fail with "ERROR: attempted to delete invisible
tuple" as we attempted to remove the TOAST tuples using
simple_heap_delete which reasoned that the given tuples should not be
visible to the command that wrote them.
This commit updates the heap_abort_speculative() function which aborts
the conflicting tuple to use itself, via toast_delete, for deleting
associated TOAST datums. Like before, the inserted toast rows are not
marked as being speculative.
This commit also adds a isolationtester spec test, exercising the
relevant code path. Unfortunately 9.5 cannot handle two waiting
sessions, and thus cannot execute this test.
Reported-By: Viren Negi, Oskari Saarenmaa
Author: Oskari Saarenmaa, edited a bit by me
Bug: #14150
Discussion: <20160519123338.12513.20271@wrigleys.postgresql.org>
Backpatch: 9.5, where ON CONFLICT was introduced
Tom Lane
Heikki Linnakangas
Robert Haas
Stephen Frost
Peter Eisentraut
Alvaro Herrera
Andres Freund
Simon Riggs