In addition to adding new typedefs, I also re-sorted the file so that
various entries add piecemeal, mostly or entirely by me, were alphabetized
the same way as other entries in the file.
In nodeFuncs.c, pgindent wants to introduce spurious indentation into
the definitions of planstate_tree_walker and planstate_walk_subplans.
Fix that by spreading the definition out across several lines, similar
to what is already done for other walker functions in that file.
In execParallel.c, in the definition of SharedExecutorInstrumentation,
pgindent wants to insert more whitespace between the type name and the
member name. That causes it to mangle comments later on the line. Fix
by moving the comments out of line. Now that we have a bit more room,
add some more details that may be useful to the next person reading
this code.
The way that PartialAggregate and FinalizeAggregate plan nodes were
displaying output columns before was bogus. Now, FinalizeAggregate
produces the same outputs as an Aggregate would have produced, while
PartialAggregate produces each of those outputs prefixed by the word
PARTIAL.
Discussion: 12585.1460737650@sss.pgh.pa.us
Patch by me, reviewed by David Rowley.
Before this commit _mdfd_getseg(), in contrast to mdnblocks(), did not
verify whether all segments leading up to the to-be-opened one, were
RELSEG_SIZE sized. That is e.g. not the case after truncating a
relation, because later segments just get truncated to zero length, not
removed.
Once a "non-existent" segment has been opened in a session, mdnblocks()
will return wrong results, causing errors like "could not read block %u
in file" when accessing blocks. Closing the session, or the later
arrival of relevant invalidation messages, would "fix" the problem.
That, so far, was mostly harmless, because most segment accesses are
only done after an mdnblocks() call. But since 428b1d6b29 we try to
open segments that might have been deleted, to trigger kernel writeback
from a backend's queue of recent writes.
To fix check segment sizes in _mdfd_getseg() when opening previously
unopened segments. In practice this shouldn't imply a lot of additional
lseek() calls, because mdnblocks() will most of the time already have
opened all relevant segments.
This commit also fixes a second problem, namely that _mdfd_getseg(
EXTENSION_RETURN_NULL) extends files during recovery, which is not
desirable for the mdwriteback() case. Add EXTENSION_REALLY_RETURN_NULL,
which does not behave that way, and use it.
Reported-By: Thom Brown
Author: Andres Freund, Abhijit Menon-Sen
Reviewd-By: Robert Haas, Fabien Coehlo
Discussion: CAA-aLv6Dp_ZsV-44QA-2zgkqWKQq=GedBX2dRSrWpxqovXK=Pg@mail.gmail.com
Fixes: 428b1d6b29
So far, when a transaction with pending invalidations, but without an
assigned xid, committed, we simply ignored those invalidation
messages. That's problematic, because those are actually sent for a
reason.
Known symptoms of this include that existing sessions on a hot-standby
replica sometimes fail to notice new concurrently built indexes and
visibility map updates.
The solution is to WAL log such invalidations in transactions without an
xid. We considered to alternatively force-assign an xid, but that'd be
problematic for vacuum, which might be run in systems with few xids.
Important: This adds a new WAL record, but as the patch has to be
back-patched, we can't bump the WAL page magic. This means that standbys
have to be updated before primaries; otherwise
"PANIC: standby_redo: unknown op code 32" errors can be encountered.
XXX:
Reported-By: Васильев Дмитрий, Masahiko Sawada
Discussion:
CAB-SwXY6oH=9twBkXJtgR4UC1NqT-vpYAtxCseME62ADwyK5OA@mail.gmail.comCAD21AoDpZ6Xjg=gFrGPnSn4oTRRcwK1EBrWCq9OqOHuAcMMC=w@mail.gmail.com
pg_atomic_compare_exchange_*_impl() were providing only the semantics of
an acquire barrier. Buildfarm members hornet and mandrill revealed this
deficit beginning with commit 008608b9d5.
While we have no report of symptoms in 9.5, we can't rule out the
possibility of certain compilers, hardware, or extension code relying on
these functions' specified barrier semantics. Back-patch to 9.5, where
commit b64d92f1a5 introduced atomics.
Reviewed by Andres Freund.
In commit c0b050192, Andres introduced the idea of including one-line
commit references in our major release notes. Teach git_changelog to
emit a (lightly adapted) version of that format, so that we don't
have to laboriously add it to the notes after the fact. The default
output isn't changed, since I anticipate still using that for minor
release notes.
Previously, database clusters created by a TAP test were shut down by
DESTROY methods attached to the PostgresNode objects representing them.
The trouble with that is that if the objects survive into the final global
destruction phase (which they do), Perl executes the DESTROY methods in an
unspecified order. Thus, the order of shutdown of multiple clusters was
indeterminate, which might lead to not-very-reproducible errors getting
logged (eg from a slave whose master might or might not get killed first).
Worse, the File::Temp objects representing the temporary PGDATA directories
might get destroyed before the PostgresNode objects, resulting in attempts
to delete PGDATA directories that still have live servers in them. On
Windows, this would lead to directory deletion failures; on Unix, it
usually had no effects worse than erratic "could not open temporary
statistics file "pg_stat/global.tmp": No such file or directory" log
messages.
While none of this would affect the reported result of the TAP test, which
is already determined, it could be very confusing when one is trying to
understand from the logs what went wrong with a failed test.
To fix, do the postmaster shutdowns in an END block rather than at object
destruction time. The END block will execute at a well-defined (and
reasonable) time during script termination, and it will stop the
postmasters in order of PostgresNode object creation. (Perhaps we should
change that to be reverse order of creation, but the main point here is
that we now have control which we did not before.) Use "pg_ctl stop", not
an asynchronous kill(SIGQUIT), so that we wait for the postmasters to shut
down before proceeding with directory deletion.
Deletion of temporary directories still happens in an unspecified order
during global destruction, but I can see no reason to care about that
once the postmasters are stopped.
The true explanation for Peter Eisentraut's report of inexact asind results
seems to be that (a) he's compiling into x87 instruction set, which uses
wider-than-double float registers, plus (b) the library function asin() on
his platform returns a result that is wider than double and is not rounded
to double width. To fix, we have to force the function's result to be
rounded comparably to what happened to the scaling constant asin_0_5.
Experimentation suggests that storing it into a volatile local variable is
the least ugly way of making that happen. Although only asin() is known to
exhibit an observable inexact result, we'd better do this in all the places
where we're hoping to get an exact result by scaling.
Change max_parallel_degree default from 0 to 2. It is possible that
this is not a good idea, or that we should go with 1 worker rather
than 2, but we won't find out without trying it. Along the way,
reword the documentation for max_parallel_degree a little bit to
hopefully make it more clear.
Discussion: 20160420174631.3qjjhpwsvvx5bau5@alap3.anarazel.de
Commit 65abaab547 tried to prevent the scaling constants used in
the degree-based trig functions from being precomputed at compile time,
because some compilers do that with functions that don't yield results
identical-to-the-last-bit to what you get at runtime. A report from
Peter Eisentraut suggests that some recent compilers are smart enough
to see through that trick, though. Instead, let's put the inputs to
these calculations into non-const global variables, which should be a
more reliable way of convincing the compiler that it can't assume that
they are compile-time constants. (If we really get desperate, we could
mark these variables "volatile", but I do not believe we should have to.)
Commit fab84c7787 tried to get away without doing an actual bind(),
but buildfarm results show that that doesn't get the job done. So we must
really bind to the target port --- and at least on my Linux box, we need a
listen() as well, or conflicts won't be detected. We rely on SO_REUSEADDR
to prevent problems from starting a postmaster on the socket immediately
after we've bound to it in the test code. (There may be platforms where
that doesn't work too well. But fortunately, we only really care whether
this works on Windows, and there the default behavior should be OK.)
Buildfarm members bowerbird and jacana have shown intermittent "could not
bind IPv4 socket" failures in the BinInstallCheck stage since mid-December,
shortly after commits 1caef31d9e and 9821492ee4 changed the
logic for selecting which port to use in temporary installations. One
plausible explanation is that we are randomly selecting ports that are
already in use for some non-Postgres purpose. Although the code tried
to defend against already-in-use ports, it used pg_isready to probe
the port which is quite unhelpful: if some non-Postgres server responds
at the given address, pg_isready will generally say "no response",
leading to exactly the wrong conclusion about whether the port is free.
Instead, let's use a simple TCP connect() call to see if anything answers
without making assumptions about what it is. Note that this means there's
no direct check for a conflicting Unix socket, but that should be okay
because there should be no other Unix sockets in use in the temporary
socket directory created for a test run.
This is only a partial solution for the TCP case, since if the port number
is in use for an outgoing connection rather than a listening socket, we'll
fail to detect that. We could try to bind() to the proposed port as a
means of detecting that case, but that would introduce its own failure
modes, since the system might consider the address to remain reserved for
some period of time after we drop the bound socket. Close study of the
errors returned by bowerbird and jacana suggests that what we're seeing
there may be conflicts with listening not outgoing sockets, so let's try
this and see if it improves matters. It's certainly better than what's
there now, in any case.
Michael Paquier, adjusted by me to work on non-Windows as well as Windows
Several issues:
1) checkpoint_flush_after doc and code disagreed about the default
2) new GUCs were missing from postgresql.conf.sample
3) Outdated source-code comment about bgwriter_flush_after's default
4) Sub-optimal categories assigned to new GUCs
5) Docs suggested backend_flush_after is PGC_SIGHUP, but it's PGC_USERSET.
6) Spell out int as integer in the docs, as done elsewhere
Reported-By: Magnus Hagander, Fujii Masao
Discussion: CAHGQGwETyTG5VYQQ5C_srwxWX7RXvFcD3dKROhvAWWhoSBdmZw@mail.gmail.com
NetBSD has seen fit to invent a libc function named strtoi(), which
conflicts with the long-established static functions of the same name in
datetime.c and ecpg's interval.c. While muttering darkly about intrusions
on application namespace, we'll rename our functions to avoid the conflict.
Back-patch to all supported branches, since this would affect attempts
to build any of them on recent NetBSD.
Thomas Munro
The implementation of that feature involves injecting nodes into the
raw parsetree where explicit parentheses appear. Various places in
parse_expr.c that test to see "is this child node of type Foo" need to
look through such nodes, else we'll get different behavior when
operator_precedence_warning is on than when it is off. Note that we only
need to handle this when testing untransformed child nodes, since the
AEXPR_PAREN nodes will be gone anyway after transformExprRecurse.
Per report from Scott Ribe and additional code-reading. Back-patch
to 9.5 where this feature was added.
Report: <ED37E303-1B0A-4CD8-8E1E-B9C4C2DD9A17@elevated-dev.com>
Given a left join containing a full join in its righthand side, with
the left join's joinclause referencing only one side of the full join
(in a non-strict fashion, so that the full join doesn't get simplified),
the planner could fail with "failed to build any N-way joins" or related
errors. This happened because the full join was seen as overlapping the
left join's RHS, and then recent changes within join_is_legal() caused
that function to conclude that the full join couldn't validly be formed.
Rather than try to rejigger join_is_legal() yet more to allow this,
I think it's better to fix initsplan.c so that the required join order
is explicit in the SpecialJoinInfo data structure. The previous coding
there essentially ignored full joins, relying on the fact that we don't
flatten them in the joinlist data structure to preserve their ordering.
That's sufficient to prevent a wrong plan from being formed, but as this
example shows, it's not sufficient to ensure that the right plan will
be formed. We need to work a bit harder to ensure that the right plan
looks sane according to the SpecialJoinInfos.
Per bug #14105 from Vojtech Rylko. This was apparently induced by
commit 8703059c6 (though now that I've seen it, I wonder whether there
are related cases that could have failed before that); so back-patch
to all active branches. Unfortunately, that patch also went into 9.0,
so this bug is a regression that won't be fixed in that branch.
The coverage was rather lean for cases that bind() or listen() might
return. Add entries for everything that there's a direct equivalent
for in the set of Unix errnos that elog.c has heard of.
There's no longer a need for the MSVC-version-specific code stanza that
forcibly redefines errno code symbols, because since commit 73838b52 we're
unconditionally redefining them in the stanza before this one anyway.
Now it's merely confusing and ugly, so get rid of it; and improve the
comment that explains what's going on here.
Although this is just cosmetic, back-patch anyway since I'm intending
to back-patch some less-cosmetic changes in this same hunk of code.
Revert commit 7cb1db1d95, which represented
a misunderstanding of the problem (if snapmgr.h weren't already included
in bufmgr.h, things wouldn't compile anywhere). Instead install what
I think is the real fix.
When we shoehorned "x op ANY (array)" into the SQL syntax, we created a
fundamental ambiguity as to the proper treatment of a sub-SELECT on the
righthand side: perhaps what's meant is to compare x against each row of
the sub-SELECT's result, or perhaps the sub-SELECT is meant as a scalar
sub-SELECT that delivers a single array value whose members should be
compared against x. The grammar resolves it as the former case whenever
the RHS is a select_with_parens, making the latter case hard to reach ---
but you can get at it, with tricks such as attaching a no-op cast to the
sub-SELECT. Parse analysis would throw away the no-op cast, leaving a
parsetree with an EXPR_SUBLINK SubLink directly under a ScalarArrayOpExpr.
ruleutils.c was not clued in on this fine point, and would naively emit
"x op ANY ((SELECT ...))", which would be parsed as the first alternative,
typically leading to errors like "operator does not exist: text = text[]"
during dump/reload of a view or rule containing such a construct. To fix,
emit a no-op cast when dumping such a parsetree. This might well be
exactly what the user wrote to get the construct accepted in the first
place; and even if she got there with some other dodge, it is a valid
representation of the parsetree.
Per report from Karl Czajkowski. He mentioned only a case involving
RLS policies, but actually the problem is very old, so back-patch to
all supported branches.
Report: <20160421001832.GB7976@moraine.isi.edu>
Also, avoid reading PGPROC's wait_event field twice, once for the wait
event and again for the wait_event_type, because the value might change
in the middle.
Petr Jelinek and Robert Haas
That commit increased all shared memory allocations to the next higher
multiple of PG_CACHE_LINE_SIZE, but it didn't ensure that allocation
started on a cache line boundary. It also failed to remove a couple
other pieces of now-useless code.
BUFFERALIGN() is perhaps obsolete at this point, and likely should be
removed at some point, too, but that seems like it can be left to a
future cleanup.
Mistakes all pointed out by Andres Freund. The patch is mine, with
a few extra assertions which I adopted from his version of this fix.
Even with old_snapshot_threshold = -1 (which disables the "snapshot
too old" feature), performance regressions were seen at moderate to
high concurrency. For example, a one-socket, four-core system
running 200 connections at saturation could see up to a 2.3%
regression, with larger regressions possible on NUMA machines.
By inlining the early (smaller, faster) tests in the
TestForOldSnapshot() function, the i7 case dropped to a 0.2%
regression, which could easily just be noise, and is clearly an
improvement. Further testing will show whether more is needed.
In commit 2ffa869620 we made pg_ctl recognize an environment variable
PGCTLTIMEOUT to set the default timeout for starting and stopping the
postmaster. However, pg_regress uses pg_ctl only for the "stop" end of
that; it has bespoke code for starting the postmaster, and that code has
historically had a hard-wired 60-second timeout. Further buildfarm
experience says it'd be a good idea if that timeout were also controlled
by PGCTLTIMEOUT, so let's make it so. Like the previous patch, back-patch
to all active branches.
Discussion: <13969.1461191936@sss.pgh.pa.us>
Commit 36a35c550a turned the interface between ginPlaceToPage and
its subroutines in gindatapage.c and ginentrypage.c into a royal mess:
page-update critical sections were started in one place and finished in
another place not even in the same file, and the very same subroutine
might return having started a critical section or not. Subsequent patches
band-aided over some of the problems with this design by making things
even messier.
One user-visible resulting problem is memory leaks caused by the need for
the subroutines to allocate storage that would survive until ginPlaceToPage
calls XLogInsert (as reported by Julien Rouhaud). This would not typically
be noticeable during retail index updates. It could be visible in a GIN
index build, in the form of memory consumption swelling to several times
the commanded maintenance_work_mem.
Another rather nasty problem is that in the internal-page-splitting code
path, we would clear the child page's GIN_INCOMPLETE_SPLIT flag well before
entering the critical section that it's supposed to be cleared in; a
failure in between would leave the index in a corrupt state. There were
also assorted coding-rule violations with little immediate consequence but
possible long-term hazards, such as beginning an XLogInsert sequence before
entering a critical section, or calling elog(DEBUG) inside a critical
section.
To fix, redefine the API between ginPlaceToPage() and its subroutines
by splitting the subroutines into two parts. The "beginPlaceToPage"
subroutine does what can be done outside a critical section, including
full computation of the result pages into temporary storage when we're
going to split the target page. The "execPlaceToPage" subroutine is called
within a critical section established by ginPlaceToPage(), and it handles
the actual page update in the non-split code path. The critical section,
as well as the XLOG insertion call sequence, are both now always started
and finished in ginPlaceToPage(). Also, make ginPlaceToPage() create and
work in a short-lived memory context to eliminate the leakage problem.
(Since a short-lived memory context had been getting created in the most
common code path in the subroutines, this shouldn't cause any noticeable
performance penalty; we're just moving the overhead up one call level.)
In passing, fix a bunch of comments that had gone unmaintained throughout
all this klugery.
Report: <571276DD.5050303@dalibo.com>
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
Print the actual value of each function result that's expected to be exact,
rather than merely emitting a NULL if it's not right. Although we print
these with extra_float_digits = 3, we should not trust that the platform
will produce a result visibly different from the expected value if it's off
only in the last place; hence, also include comparisons against the exact
values as before. This is a bit bulkier and uglier than the previous
printout, but it will provide more information and be easier to interpret
if there's a test failure.
Discussion: <18241.1461073100@sss.pgh.pa.us>
Coverity complained that oldPartitionLock was possibly dereferenced after
having been set to NULL. That actually can't happen, because we'd only use
it if (oldFlags & BM_TAG_VALID) is true. But nonetheless Coverity is
justified in complaining, because at line 1275 we actually overwrite
oldFlags, and then still expect its BM_TAG_VALID bit to be a safe guide to
whether to release the oldPartitionLock. Thus, the code would be incorrect
if someone else had changed the buffer's BM_TAG_VALID flag meanwhile.
That should not happen, since we hold pin on the buffer throughout this
sequence, but it's starting to look like a rather shaky chain of logic.
And there's no need for such assumptions, because we can simply replace
the (oldFlags & BM_TAG_VALID) tests with (oldPartitionLock != NULL),
which has identical results and makes it plain to all comers that we don't
dereference a null pointer. A small side benefit is that the range of
liveness of oldFlags is greatly reduced, possibly allowing the compiler
to save a register.
This is just cleanup, not an actual bug fix, so there seems no need
for a back-patch.
Per discussion, there doesn't seem to be much value in having
NUM_SPINLOCK_SEMAPHORES set to 1024: under any scenario where you are
running more than a few backends concurrently, you really had better have a
real spinlock implementation if you want tolerable performance. And 1024
semaphores is a sizable fraction of the system-wide SysV semaphore limit
on many platforms. Therefore, reduce this setting's default value to 128
to make it less likely to cause out-of-semaphores problems.
In commit 6f0d6a507 I added a duplicate copy of psqlscanslash's identifier
downcasing code, but actually it's not hard to split that out as a callable
subroutine and avoid the duplication.
We've had repeated troubles over the years with failures to initialize
spinlocks correctly; see 6b93fcd14 for a recent example. Most of the time,
on most platforms, such oversights can escape notice because all-zeroes is
the expected initial content of an slock_t variable. The only platform
we have where the initialized state of an slock_t isn't zeroes is HPPA,
and that's practically gone in the wild. To make it easier to catch such
errors without needing one of those, adjust the --disable-spinlocks code
so that zero is not a valid value for an slock_t for it.
In passing, remove a bunch of unnecessary #include's from spin.c;
commit daa7527afc removed all the intermodule coupling that
made them necessary.
Although OID acts pretty much like user data, the other system columns do
not, so an index on one would likely misbehave. And it's pretty hard to
see a use-case for one, anyway. Let's just forbid the case rather than
worry about whether it should be supported.
David Rowley
For reasons of sheer brain fade, we (I) was calling systable_endscan()
immediately after systable_getnext() and expecting the tuple returned
by systable_getnext() to still be valid.
That's clearly wrong. Move the systable_endscan() down below the tuple
usage.
Discovered initially by Pavel Stehule and then also by Alvaro.
Add a regression test based on Alvaro's testing.
The original coding of this test used table and view names like "t",
"tv", "foo", etc. This tended to interfere with doing simple manual
tests in the regression database; not to mention that it posed a
considerable risk of conflict with other regression test scripts.
Prefix these names with "mvtest_" to avoid such conflicts.
Also, change transiently-created role name to be "regress_xxx" per
discussions about being careful with regression-test role creation.
Careless coding added by commit 07cacba983 could result in a crash
or a bizarre error message if someone tried to select an index on the
OID column as the replica identity index for a table. Back-patch to 9.4
where the feature was introduced.
Discussion: CAKJS1f8TQYgTRDyF1_u9PVCKWRWz+DkieH=U7954HeHVPJKaKg@mail.gmail.com
David Rowley
The previous display was sort of confusing, because it didn't
distinguish between the number of workers that we planned to launch
and the number that actually got launched. This has already confused
several people, so display both numbers and label them clearly.
Julien Rouhaud, reviewed by me.
pg_xlogdump includes bufmgr.h. With a compiler that emits code for
static inline functions even when they're unreferenced, that leads
to unresolved external references in the new static-inline version
of BufferGetPage(). So hide it with #ifndef FRONTEND, as we've done
for similar issues elsewhere. Per buildfarm member pademelon.
The regression test checks whether the output of pg_stat_replication is
expected or not after changing synchronous_standby_names and reloading
the configuration file. Regarding this test logic, previously there was
a timing issue which made the test result unstable. That is,
pg_stat_replication could return unexpected result during small window
after the configuration file was reloaded before new setting value
took effect, and which made the test fail.
This commit changes the test logic so that it uses a loop with a timeout
to give some room for the test to pass. Now the test fails only when
pg_stat_replication keeps returning unexpected result for 30 seconds.
Michael Paquier
The code had a query-lifespan memory leak when encountering GIN entries
that have posting lists (rather than posting trees, ie, there are a
relatively small number of heap tuples containing this index key value).
With a suitable data distribution this could add up to a lot of leakage.
Problem seems to have been introduced by commit 36a35c550, so back-patch
to 9.4.
Julien Rouhaud
\crosstabview interpreted its arguments in an unusual way, including
doing case-insensitive matching of unquoted column names, which is
surely not the right thing. Rip that out in favor of doing something
equivalent to the dequoting/case-folding rules used by other psql
commands. To keep it simple, change the syntax so that the optional
sort column is specified as a separate argument, instead of the
also-quite-unusual syntax that attached it to the colH argument with
a colon.
Also, rework the error messages to be closer to project style.
My previous attempt at doing so, in 80abbeba23, was not sufficient. While that
fixed the problem for bufmgr.c and lwlock.c , s_lock.c still has non-constant
expressions in the struct initializer, because the file/line/function
information comes from the caller of s_lock().
Give up on using a macro, and use a static inline instead.
Discussion: 4369.1460435533@sss.pgh.pa.us
When re-reading an update involving both an old tuple and a new tuple from
disk, reorderbuffer.c was careless about whether the new tuple is suitably
aligned for direct access --- in general, it isn't. We'd missed seeing
this in the buildfarm because the contrib/test_decoding tests exercise this
code path only a few times, and by chance all of those cases have old
tuples with length a multiple of 4, which is usually enough to make the
access to the new tuple's t_len safe. For some still-not-entirely-clear
reason, however, Debian's sparc build gets a bus error, as reported by
Christoph Berg; perhaps it's assuming 8-byte alignment of the pointer?
The lack of previous field reports is probably because you need all of
these conditions to trigger a crash: an alignment-picky platform (not
Intel), a transaction large enough to spill to disk, an update within
that xact that changes a primary-key field and has an odd-length old tuple,
and of course logical decoding tracing the transaction.
Avoid the alignment assumption by using memcpy instead of fetching t_len
directly, and add a test case that exposes the crash on picky platforms.
Back-patch to 9.4 where the bug was introduced.
Discussion: <20160413094117.GC21485@msg.credativ.de>
Commit 314cbfc5da redefined the signature of this hook as
typedef int (*walrcv_receive_type) (char **buffer, int *wait_fd);
But in fact the type of the "wait_fd" variable ought to be pgsocket,
which is what WaitLatchOrSocket expects, and which is necessary if
we want to be able to assign PGINVALID_SOCKET to it on Windows.
So fix that.
It was declared as "pid_t", which would be fine except that none of
the places that printed it in error messages took any thought for the
possibility that it's not equivalent to "int". This leads to warnings
on some buildfarm members, and could possibly lead to actually wrong
error messages on those platforms. There doesn't seem to be any very
good reason not to just make it "int"; it's only ever assigned from
MyProcPid, which is int. If we want to cope with PIDs that are wider
than int, this is not the place to start.
Also, fix the comment, which seems to perhaps be a leftover from a time
when the field was only a bool?
Per buildfarm. Back-patch to 9.5 which has same issue.
For a long time, opclasscmds.c explained that "we do not create a
dependency link to the AM [for an opclass or opfamily], because we don't
currently support DROP ACCESS METHOD". Commit 473b932870 invented
DROP ACCESS METHOD, but it batted only 1 for 2 on adding the dependency
links, and 0 for 2 on updating the comments about the topic.
In passing, undo the same commit's entirely inappropriate decision to
blow away an existing index as a side-effect of create_am.sql.
As part of reserving the pg_* namespace for default roles and in line
with SET ROLE and other previous efforts, disallow settings the role
to a default/reserved role using SET SESSION AUTHORIZATION.
These checks and restrictions on what is allowed regarding default /
reserved roles are under debate, but it seems prudent to ensure that
the existing checks at least cover the intended cases while the
debate rages on. On me to clean it up if the consensus decision is
to remove these checks.
Logical messages, added in 3fe3511d05, during decoding failed to filter
messages emitted in other databases and messages emitted "under" a
replication origin the output plugin isn't interested in.
Add tests to verify that both types of filtering actually work. While
touching message.sql remove hunk obsoleted by d25379e.
Bump XLOG_PAGE_MAGIC because xl_logical_message changed and because
3fe3511d05 had omitted doing so. 3fe3511d05 additionally didn't bump
catversion, but 7a542700d has done so since.
Author: Petr Jelinek
Reported-By: Andres Freund
Discussion: 20160406142513.wotqy3ba3kanr423@alap3.anarazel.de
The current definition of init_spin_delay (introduced recently in
48354581a) wasn't C89 compliant. It's not legal to refer to refer to
non-constant expressions, and the ptr argument was one. This, as
reported by Tom, lead to a failure on buildfarm animal pademelon.
The pointer, especially on system systems with ASLR, isn't super helpful
anyway, though. So instead of making init_spin_delay into an inline
function, make s_lock_stuck() report the function name in addition to
file:line and change init_spin_delay() accordingly. While not a direct
replacement, the function name is likely more useful anyway (line
numbers are often hard to interpret in third party reports).
This also fixes what file/line number is reported for waits via
s_lock().
As PG_FUNCNAME_MACRO is now used outside of elog.h, move it to c.h.
Reported-By: Tom Lane
Discussion: 4369.1460435533@sss.pgh.pa.us
As reported by Michael Feld, pg_upgrade'ing an installation having
extensions with operator families that contain just a single operator class
failed to reproduce the extension membership of those operator families.
This caused no immediate ill effects, but would create problems when later
trying to do a plain dump and restore, because the seemingly-not-part-of-
the-extension operator families would appear separately in the pg_dump
output, and then would conflict with the families created by loading the
extension. This has been broken ever since extensions were introduced,
and many of the standard contrib extensions are affected, so it's a bit
astonishing nobody complained before.
The cause of the problem is a perhaps-ill-considered decision to omit
such operator families from pg_dump's output on the grounds that the
CREATE OPERATOR CLASS commands could recreate them, and having explicit
CREATE OPERATOR FAMILY commands would impede loading the dump script into
pre-8.3 servers. Whatever the merits of that decision when 8.3 was being
written, it looks like a poor tradeoff now. We can fix the pg_upgrade
problem simply by removing that code, so that the operator families are
dumped explicitly (and then will be properly made to be part of their
extensions).
Although this fixes the behavior of future pg_upgrade runs, it does nothing
to clean up existing installations that may have improperly-linked operator
families. Given the small number of complaints to date, maybe we don't
need to worry about providing an automated solution for that; anyone who
needs to clean it up can do so with manual "ALTER EXTENSION ADD OPERATOR
FAMILY" commands, or even just ignore the duplicate-opfamily errors they
get during a pg_restore. In any case we need this fix.
Back-patch to all supported branches.
Discussion: <20228.1460575691@sss.pgh.pa.us>
The recent patch to make Pin/UnpinBuffer lockfree in the hot
path (48354581a), accidentally used pg_atomic_fetch_or_u32() in
MarkLocalBufferDirty(). Other code operating on local buffers was
careful to only use pg_atomic_read/write_u32 which just read/write from
memory; to avoid unnecessary overhead.
On its own that'd just make MarkLocalBufferDirty() slightly less
efficient, but in addition InitLocalBuffers() doesn't call
pg_atomic_init_u32() - thus the spinlock fallback for the atomic
operations isn't initialized. That in turn caused, as reported by Tom,
buildfarm animal gaur to fail. As those errors are actually useful
against this type of error, continue to omit - intentionally this time -
initialization of the atomic variable.
In addition, add an explicit note about only using pg_atomic_read/write
on local buffers's state to BufferDesc's description.
Reported-By: Tom Lane
Discussion: 1881.1460431476@sss.pgh.pa.us
It's silly to define these counts as narrower than they might someday
need to be. Also, I believe that the BLCKSZ * nflush calculation in
mdwriteback was capable of overflowing an int.
Commit 428b1d6b29 introduced the use of
msync() for flushing dirty data from the kernel's file buffers. Several
portability issues were overlooked, though:
* Not all implementations of mmap() think that nbytes == 0 means "map
the whole file". To fix, use lseek() to find out the true length.
Fix callers of pg_flush_data to be aware that nbytes == 0 may result
in trashing the file's seek position.
* Not all implementations of mmap() will accept partial-page mmap
requests. To fix, round down the length request to whatever sysconf()
says the page size is. (I think this is OK from a portability standpoint,
because sysconf() is required by SUS v2, and we aren't trying to compile
this part on Windows anyway. Buildfarm should let us know if not.)
* On 32-bit machines, the file size might exceed the available free
address space, or even exceed what will fit in size_t. Check for
the latter explicitly to avoid passing a false request size to mmap().
If mmap fails, silently fall through to the next implementation method,
rather than bleating to the postmaster log and giving up.
* mmap'ing directories fails on some platforms, and even if it works,
msync'ing the directory is quite unlikely to help, as for that matter are
the other flush implementations. In pre_sync_fname(), just skip flush
attempts on directories.
In passing, copy-edit the comments a bit.
Stas Kelvich and myself
I've seen one too many "could not bind IPv4 socket: No error" log entries
from the Windows buildfarm members. Per previous discussion, this is
likely caused by the fact that we're doing nothing to translate
WSAGetLastError() to errno. Put in a wrapper layer to do that.
If this works as expected, it should get back-patched, but let's see what
happens in the buildfarm first.
Discussion: <4065.1452450340@sss.pgh.pa.us>
The original patch kind of ignored the fact that we were doing something
different from a costing point of view, but nobody noticed. This patch
fixes that oversight.
David Rowley
That unused function was introduced as a sample because synchronous
replication or replication monitoring tools might need it in the future.
Recently commit 989be08 added the function SyncRepGetOldestSyncRecPtr
which provides almost the same functionality for multiple synchronous
standbys feature. So it's time to remove that unused sample function.
This commit does that.
Per discussion, this gives potential users of the hook more flexibility,
because they can build custom Paths that implement only one stage of
upper processing atop core-provided Paths for earlier stages.
Coverity complained about this code, not without reason because it was
rather messy. Adjust it to not scribble on the passed string; that adds
one malloc/free cycle per column name, which is going to be insignificant
in context. We can actually const-ify both the string argument and the
PGresult.
Daniel Verité, with some further cleanup by me
On a big NUMA machine with 1000 connections in saturation load
there was a performance regression due to spinlock contention, for
acquiring values which were never used. Just fill with dummy
values if we're not going to use them.
This patch has not been benchmarked yet on a big NUMA machine, but
it seems like a good idea on general principle, and it seemed to
prevent an apparent 2.2% regression on a single-socket i7 box
running 200 connections at saturation load.
Rename this function to GenericXLogRegisterBuffer() to make it clearer
what it does, and leave room for other sorts of "register" actions in
future. Also, replace its "bool isNew" argument with an integer flags
argument, so as to allow adding more flags in future without an API
break.
Alexander Korotkov, adjusted slightly by me
The previous coding could allow the contents of the "hole" between pd_lower
and pd_upper to diverge during replay from what it had been when the update
was originally applied. This would pose a problem if checksums were in
use, and in any case would complicate forensic comparisons between master
and slave servers. So force the "hole" to contain zeroes, both at initial
application of a generically-logged action, and at replay.
Alexander Korotkov, adjusted slightly by me
In commit b0e40d1893, I should have just
removed the /D switch defining WIN64. The reason the code worked before
is that all Windows64 compilers automatically predefine _WIN64. Perhaps
at one time we had code that depended on WIN64 being defined, but it's
long gone, and we should not encourage any reappearance. Per discussion
with Christian Ullrich.
When IF NOT EXISTS was added to CREATE TABLE AS, this logic didn't get
the memo, possibly resulting in an Assert failure. It looks like there
would have been no ill effects in a non-Assert build, though. Back-patch
to 9.5 where the IF NOT EXISTS option was added.
Stas Kelvich
Everyplace else thinks it's _WIN64, so make these places fall in line.
The pg_regress.c usage is not going to result in any change in behavior,
only suppressing (or not) a compiler warning about downcasting HANDLEs.
So there seems no need for back-patching there.
The libpq/win32.mak usage might represent an actual bug, if anyone were
using this script to build for Windows64, which perhaps nobody is.
Given the lack of field complaints, no back-patch here either.
pg_regress.c problem found by Christian Ullrich, the other by me.
It turns out that those PyErr_Clear() calls I removed from plpy_elog.c
in 7e3bb08038 et al were not quite as random as they appeared: they
mask a Python 2.3.x bug. (Specifically, it turns out that PyType_Ready()
can fail if the error indicator is set on entry, and PLy_traceback's fetch
of frame.f_code may be the first operation in a session that requires the
"frame" type to be readied. Ick.) Put back the clear call, but in a more
centralized place closer to what it's protecting, and this time with a
comment warning what it's really for.
Per buildfarm member prairiedog. Although prairiedog was only failing
on HEAD, it seems clearly possible for this to occur in older branches
as well, so back-patch to 9.2 the same as the previous patch.
I was initially concerned that the some of the hundreds of
references to BufferGetPage() where the literal
BGP_NO_SNAPSHOT_TEST were passed might not optimize as well as a
macro, leading to some hard-to-find performance regressions in
corner cases. Inspection of disassembled code has shown identical
code at all inspected locations, and the size difference doesn't
amount to even one byte per such call. So make it readable.
Per gripes from Álvaro Herrera and Tom Lane
It was incorrectly declared as a volatile pointer to a non-volatile
structure. Eliminate the OldSnapshotControl struct definition; it
is really not needed. Pointed out by Tom Lane.
While at it, add OldSnapshotControlData to pgindent's list of
structures.
To avoid any possible overlap with existing roles on a system when
doing a 'make installcheck', use role names which start with
'regress_'.
Pointed out by Tom.
Commit 5c3c3cd0a3 plastered "volatile" on a bunch of variables
in PLy_output(), but removed the one that actually mattered, ie the
one on "oldcontext". This allows some versions of clang to generate
code in which "oldcontext" has been trashed when control reaches the
PG_CATCH block. Per buildfarm member tick.
The existing code would either Assert or generate an invalid
SyncRepConfig variable, neither of which is desirable. A regular
error should be thrown instead.
This commit silences compiler warning in non assertion-enabled builds.
Per report from Jeff Janes.
Suggested fix by Tom Lane.
It's not entirely clear to me whether PyString_AsString can return
null (looks like the answer might vary between Python 2 and 3).
But in any case, this code's attempt to cope with the possibility
was quite broken, because pstrdup() neither allows a null argument
nor ever returns a null.
Moreover, the code below this point assumes that "message" is a
palloc'd string, which would not be the case for a dgettext result.
Fix both problems by doing the pstrdup step separately.
Coverity complained about this resource leak (why now, I don't know,
since it's been like that a long time). Our general policy in pg_dump
is that PQExpBuffers are worth cleaning up, so do it here too. But
don't bother with a back-patch, because it seems unlikely that very
many databases contain enough FOREIGN SERVER objects to notice.
Coverity complained about an apparent missing "break" in a switch
added by bb140506df. The human-readable comments are pretty
clear that this is intentional, but add a standard /* FALL THRU */
comment to make it clear to tools too.
Coverity complained that the code added by 015e88942a lacked an
error check for SearchSysCache1 failures, which it should have. But
the code was pretty duff in other ways too, including failure to think
about whether it could really cope with arrays of different lengths.
PLy_elog() could attempt to access strings that Python had already freed,
because the strings that PLy_get_spi_error_data() returns are simply
pointers into storage associated with the error "val" PyObject. That's
fine at the instant PLy_get_spi_error_data() returns them, but just after
that PLy_traceback() intentionally releases the only refcount on that
object, allowing it to be freed --- so that the strings we pass to
ereport() are dangling pointers.
In principle this could result in garbage output or a coredump. In
practice, I think the risk is pretty low, because there are no Python
operations between where we decrement that refcount and where we use the
strings (and copy them into PG storage), and thus no reason for Python
to recycle the storage. Still, it's clearly hazardous, and it leads to
Valgrind complaints when running under a Valgrind that hasn't been
lobotomized to ignore Python memory allocations.
The code was a mess anyway: we fetched the error data out of Python
(clearing Python's error indicator) with PyErr_Fetch, examined it, pushed
it back into Python with PyErr_Restore (re-setting the error indicator),
then immediately pulled it back out with another PyErr_Fetch. Just to
confuse matters even more, there were some gratuitous-and-yet-hazardous
PyErr_Clear calls in the "examine" step, and we didn't get around to doing
PyErr_NormalizeException until after the second PyErr_Fetch, making it even
less clear which object was being manipulated where and whether we still
had a refcount on it. (If PyErr_NormalizeException did substitute a
different "val" object, it's possible that the problem could manifest for
real, because then we'd be doing assorted Python stuff with no refcount
on the object we have string pointers into.)
So, rearrange all that into some semblance of sanity, and don't decrement
the refcount on the Python error objects until the end of PLy_elog().
In HEAD, I failed to resist the temptation to reformat some messy bits
from 5c3c3cd0a3 along the way.
Back-patch as far as 9.2, because the code is substantially the same
that far back. I believe that 9.1 has the bug as well; but the code
around it is rather different and I don't want to take a chance on
breaking something for what seems a low-probability problem.
Previously we used a spinlock, in adition to the atomically manipulated
->state field, to protect the wait queue. But it's pretty simple to
instead perform the locking using a flag in state.
Due to 6150a1b0 BufferDescs, on platforms (like PPC) with > 1 byte
spinlocks, increased their size above 64byte. As 64 bytes are the size
we pad allocated BufferDescs to, this can increase false sharing;
causing performance problems in turn. Together with the previous commit
this reduces the size to <= 64 bytes on all common platforms.
Author: Andres Freund
Discussion: CAA4eK1+ZeB8PMwwktf+3bRS0Pt4Ux6Rs6Aom0uip8c6shJWmyg@mail.gmail.com20160327121858.zrmrjegmji2ymnvr@alap3.anarazel.de
Pinning/Unpinning a buffer is a very frequent operation; especially in
read-mostly cache resident workloads. Benchmarking shows that in various
scenarios the spinlock protecting a buffer header's state becomes a
significant bottleneck. The problem can be reproduced with pgbench -S on
larger machines, but can be considerably worse for queries which touch
the same buffers over and over at a high frequency (e.g. nested loops
over a small inner table).
To allow atomic operations to be used, cram BufferDesc's flags,
usage_count, buf_hdr_lock, refcount into a single 32bit atomic variable;
that allows to manipulate them together using 32bit compare-and-swap
operations. This requires reducing MAX_BACKENDS to 2^18-1 (which could
be lifted by using a 64bit field, but it's not a realistic configuration
atm).
As not all operations can easily implemented in a lockfree manner,
implement the previous buf_hdr_lock via a flag bit in the atomic
variable. That way we can continue to lock the header in places where
it's needed, but can get away without acquiring it in the more frequent
hot-paths. There's some additional operations which can be done without
the lock, but aren't in this patch; but the most important places are
covered.
As bufmgr.c now essentially re-implements spinlocks, abstract the delay
logic from s_lock.c into something more generic. It now has already two
users, and more are coming up; there's a follupw patch for lwlock.c at
least.
This patch is based on a proof-of-concept written by me, which Alexander
Korotkov made into a fully working patch; the committed version is again
revised by me. Benchmarking and testing has, amongst others, been
provided by Dilip Kumar, Alexander Korotkov, Robert Haas.
On a large x86 system improvements for readonly pgbench, with a high
client count, of a factor of 8 have been observed.
Author: Alexander Korotkov and Andres Freund
Discussion: 2400449.GjM57CE0Yg@dinodell
I used the wrong variable here. Doesn't make a difference today because
the only plausible caller passes a non-NULL variable, but someday it
will be wrong, and even today's correctness is subtle: the caller that
does pass a NULL is never invoked because of object type constraints.
Surely not a condition to rely on.
Noted by Coverity
Since we're requiring pages handled by generic_xlog.c to be standard
format, specify REGBUF_STANDARD when doing a full-page image, so that
xloginsert.c can compress out the "hole" between pd_lower and pd_upper.
Given the current API in which this path will be taken only for a newly
initialized page, the hole is likely to be particularly large in such
cases, so that this oversight could easily be performance-significant.
I don't notice any particular change in the runtime of contrib/bloom's
regression test, though.
Make the inner comparison loops of computeDelta() as tight as possible by
pulling considerations of valid and invalid ranges out of the inner loops,
and extending a match or non-match detection as far as possible before
deciding what to do next. To keep this tractable, give up the possibility
of merging fragments across the pd_lower to pd_upper gap. The fraction of
pages where that could happen (ie, there are 4 or fewer bytes in the gap,
*and* data changes immediately adjacent to it on both sides) is too small
to be worth spending cycles on.
Also, avoid two BLCKSZ-length memcpy()s by computing the delta before
moving data into the target buffer, instead of after. This doesn't save
nearly as many cycles as being tenser about computeDelta(), but it still
seems worth doing.
On my machine, this patch cuts a full 40% off the runtime of
contrib/bloom's regression test.
This routine is unsafe as implemented, because it invalidates the page
image pointers returned by previous GenericXLogRegister() calls.
Rather than complicate the API or the implementation to avoid that,
let's just get rid of it; the use-case for having it seems much
too thin to justify a lot of work here.
While at it, do some wordsmithing on the SGML docs for generic WAL.
Improve commentary, use more specific names for the delta fields,
const-ify pointer arguments where possible, avoid assuming that
initializing only the first element of a local array will guarantee
that the remaining elements end up as we need them. (I think that
code in generic_redo actually worked, but only because InvalidBuffer
is zero; this is a particularly ugly way of depending on that ...)
\crosstabview is a completely different way to display results from a
query: instead of a vertical display of rows, the data values are placed
in a grid where the column and row headers come from the data itself,
similar to a spreadsheet.
The sort order of the horizontal header can be specified by using
another column in the query, and the vertical header determines its
ordering from the order in which they appear in the query.
This only allows displaying a single value in each cell. If more than
one value correspond to the same cell, an error is thrown. Merging of
values can be done in the query itself, if necessary. This may be
revisited in the future.
Author: Daniel Verité
Reviewed-by: Pavel Stehule, Dean Rasheed
The buildfarm showed failure for Windows MSVC builds due to this
omission. This might not be the only problem with the Makefile for
this feature, but hopefully this will get it past the immediate
problem.
Fix suggested by Tom Lane
Previously bcac23d exposed a subset of support functions, namely the
ones Kaigai found useful. In
20160304193704.elq773pyg5fyl3mi@alap3.anarazel.de I mentioned that
there's some functions missing to use the facility in an external
project.
To avoid having to add functions piecemeal, add all the functions which
are used to define READ_* and WRITE_* macros; users of the extensible
node functionality are likely to need these. Additionally expose
outDatum(), which doesn't have it's own WRITE_ macro, as it needs
information from the embedding struct.
Discussion: 20160304193704.elq773pyg5fyl3mi@alap3.anarazel.de
This creates an initial set of default roles which administrators may
use to grant access to, historically, superuser-only functions. Using
these roles instead of granting superuser access reduces the number of
superuser roles required for a system. Documention for each of the
default roles has been added to user-manag.sgml.
Bump catversion to 201604082, as we had a commit that bumped it to
201604081 and another that set it back to 201604071...
Reviews by José Luis Tallón and Robert Haas
This will prevent users from creating roles which begin with "pg_" and
will check for those roles before allowing an upgrade using pg_upgrade.
This will allow for default roles to be provided at initdb time.
Reviews by José Luis Tallón and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Pretty sure I removed this based on some incorrect thinking that it was
no longer possible to reach this point for a table which will not be
dumped, but that's clearly wrong.
Pointed out on IRC by Erik Rijkers.
These parameters are available for SSPI authentication only, to make
it possible to make it behave more like "normal gssapi", while
making it possible to maintain compatibility.
compat_realm is on by default, but can be turned off to make the
authentication use the full Kerberos realm instead of the NetBIOS name.
upn_username is off by default, and can be turned on to return the users
Kerberos UPN rather than the SAM-compatible name (a user in Active
Directory can have both a legacy SAM-compatible username and a new
Kerberos one. Normally they are the same, but not always)
Author: Christian Ullrich
Reviewed by: Robbie Harwood, Alvaro Herrera, me
Output order from the pg_indexes view might vary depending on the
phase of the moon, so add ORDER BY to ensure stable results of tests
added by commit 386e3d7609.
Per buildfarm.
OpenSSL has an unfortunate tendency to mix per-session state error
handling with per-thread error handling. This can cause problems when
programs that link to libpq with OpenSSL enabled have some other use of
OpenSSL; without care, one caller of OpenSSL may cause problems for the
other caller. Backend code might similarly be affected, for example
when a third party extension independently uses OpenSSL without taking
the appropriate precautions.
To fix, don't trust other users of OpenSSL to clear the per-thread error
queue. Instead, clear the entire per-thread queue ahead of certain I/O
operations when it appears that there might be trouble (these I/O
operations mostly need to call SSL_get_error() to check for success,
which relies on the queue being empty). This is slightly aggressive,
but it's pretty clear that the other callers have a very dubious claim
to ownership of the per-thread queue. Do this is both frontend and
backend code.
Finally, be more careful about clearing our own error queue, so as to
not cause these problems ourself. It's possibly that control previously
did not always reach SSLerrmessage(), where ERR_get_error() was supposed
to be called to clear the queue's earliest code. Make sure
ERR_get_error() is always called, so as to spare other users of OpenSSL
the possibility of similar problems caused by libpq (as opposed to
problems caused by a third party OpenSSL library like PHP's OpenSSL
extension). Again, do this is both frontend and backend code.
See bug #12799 and https://bugs.php.net/bug.php?id=68276
Based on patches by Dave Vitek and Peter Eisentraut.
From: Peter Geoghegan <pg@bowt.ie>
Create a "bsd" auth method that works the same as "password" so far as
clients are concerned, but calls the BSD Authentication service to
check the password. This is currently only available on OpenBSD.
Marisa Emerson, reviewed by Thomas Munro
This allows parallel aggregation to use them. It may seem surprising
that we use float8_combine for both float4_accum and float8_accum
transition functions, but that's because those functions differ only
in the type of the non-transition-state argument.
Haribabu Kommi, reviewed by David Rowley and Tomas Vondra
As noticed by Tom Lane changing operation's number in commit
bb140506df causes on-disk format incompatibility.
Revert to previous numbering, that is reason to add special array to store
priorities of operation. Also it reverts order of tsquery to previous.
Author: Dmitry Ivanov
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
Most of what is produced by the detailed verbosity level is of no
interest at all, so switch to the normal level for more usable output.
Christian Ullrich
Backpatch to all live branches
Don't try to examine S_ISLNK(st.st_mode) after a failed lstat().
It's undefined.
Also, if the lstat() reported ENOENT, we do not wish that to be a hard
error, but the code might nonetheless treat it as one (giving an entirely
misleading error message, too) depending on luck-of-the-draw as to what
S_ISLNK() returned.
Don't throw error for ENOENT from rmdir(), either. (We're not really
expecting ENOENT because we just stat'd the file successfully; but
if we're going to allow ENOENT in the symlink code path, surely the
directory code path should too.)
Generate an appropriate errcode for its-the-wrong-type-of-file complaints.
(ERRCODE_SYSTEM_ERROR doesn't seem appropriate, and failing to write
errcode() around it certainly doesn't work, and not writing an errcode
at all is not per project policy.)
Valgrind noticed the undefined S_ISLNK result; the other problems emerged
while reading the code in the area.
All of this appears to have been introduced in 8f15f74a44.
Back-patch to 9.5 where that commit appeared.
Patch adds a new, more rich, way to emit error message or exception from
PL/Pythonu code.
Author: Pavel Stehule
Reviewers: Catalin Iacob, Peter Eisentraut, Jim Nasby
Benchmarking has shown that the current number of clog buffers limits
scalability. We've previously increased the number in 33aaa139, but
that's not sufficient with a large number of clients.
We've benchmarked the cost of increasing the limit by benchmarking worst
case scenarios; testing showed that 128 buffers don't cause a
regression, even in contrived scenarios, whereas 256 does
There are a number of more complex patches flying around to address
various clog scalability problems, but this is simple enough that we can
get it into 9.6; and is beneficial even after those patches have been
applied.
It is a bit unsatisfactory to increase this in small steps every few
releases, but a better solution seems to require a rewrite of slru.c;
not something done quickly.
Author: Amit Kapila and Andres Freund
Discussion: CAA4eK1+-=18HOrdqtLXqOMwZDbC_15WTyHiFruz7BvVArZPaAw@mail.gmail.com
The code that estimates what parallel degree should be uesd for the
scan of a relation is currently rather stupid, so add a parallel_degree
reloption that can be used to override the planner's rather limited
judgement.
Julien Rouhaud, reviewed by David Rowley, James Sewell, Amit Kapila,
and me. Some further hacking by me.
The PAM_RHOST item is set to the remote IP address or host name and can
be used by PAM modules. A pg_hba.conf option is provided to choose
between IP address and resolved host name.
From: Grzegorz Sampolski <grzsmp@gmail.com>
Reviewed-by: Haribabu Kommi <kommi.haribabu@gmail.com>
We still use replacement selection for the first run of the sort only
and only when the number of tuples is relatively small. Otherwise,
the first run, and subsequent runs in all cases, are produced using
quicksort. This tends to be faster except perhaps for very small
amounts of working memory.
Peter Geoghegan, reviewed by Tomas Vondra, Jeff Janes, Mithun Cy,
Greg Stark, and me.
Contention on the relation extension lock can become quite fierce when
multiple processes are inserting data into the same relation at the same
time at a high rate. Experimentation shows the extending the relation
multiple blocks at a time improves scalability.
Dilip Kumar, reviewed by Petr Jelinek, Amit Kapila, and me.
In cases where joins use multiple columns we currently assess each join
separately causing gross mis-estimates for join cardinality.
This patch adds use of FK information for the first time into the
planner. When FKs are present and we have multi-column join information,
plan estimates will be drastically improved. Cases with multiple FKs
are handled, though partial matches are ignored currently.
Net effect is substantial performance improvements for joins in many
common cases. Additional planning time is isolated to cases that are
currently performing poorly, measured at 0.08 - 0.15 ms.
Please watch for planner performance regressions; circumstances seem
unlikely but the law of unintended consequences may apply somewhen.
Additional complex tests welcome to prove this before release.
Tests can be performed using SET enable_fkey_estimates = on | off
using scripts provided during Hackers discussions, message id:
552335D9.3090707@2ndquadrant.com
Authors: Tomas Vondra and David Rowley
Reviewed and tested by Simon Riggs, adding comments only
We shouldn't be adding roles during the regression tests as that can
cause back-to-back installcheck runs to fail and users running the
regression tests likley don't want those extra roles.
Pointed out by Tom
Extracted from pending unique-join patch, since this is a rather large
delta but it's simply moving code out into separately-accessible
subroutines.
I (tgl) did choose to add a bit more logic to rel_supports_distinctness,
so that it verifies that there's at least one potentially usable unique
index rather than just checking indexlist != NIL. Otherwise there's
no functional change here.
David Rowley
While prior to this patch the user-visible effect on the database
of any set of successfully committed serializable transactions was
always consistent with some one-at-a-time order of execution of
those transactions, the presence of declarative constraints could
allow errors to occur which were not possible in any such ordering,
and developers had no good workarounds to prevent user-facing
errors where they were not necessary or desired. This patch adds
a check for serialization failure ahead of duplicate key checking
so that if a developer explicitly (redundantly) checks for the
pre-existing value they will get the desired serialization failure
where the problem is caused by a concurrent serializable
transaction; otherwise they will get a duplicate key error.
While it would be better if the reads performed by the constraints
could count as part of the work of the transaction for
serialization failure checking, and we will hopefully get there
some day, this patch allows a clean and reliable way for developers
to work around the issue. In many cases existing code will already
be doing the right thing for this to "just work".
Author: Thomas Munro, with minor editing of docs by me
Reviewed-by: Marko Tiikkaja, Kevin Grittner
Patch introduces new text search operator (<-> or <DISTANCE>) into tsquery.
On-disk and binary in/out format of tsquery are backward compatible.
It has two side effect:
- change order for tsquery, so, users, who has a btree index over tsquery,
should reindex it
- less number of parenthesis in tsquery output, and tsquery becomes more
readable
Authors: Teodor Sigaev, Oleg Bartunov, Dmitry Ivanov
Reviewers: Alexander Korotkov, Artur Zakirov
Commit c22650cd64 sparked a discussion
about diverse interpretations of "token user" in error messages. Expel
old and new specimens of that phrase by making all GetTokenInformation()
callers report errors the way GetTokenUser() has been reporting them.
These error conditions almost can't happen, so users are unlikely to
observe this change.
Reviewed by Tom Lane and Stephen Frost.
GetTokenUser() will have reported an adequate error message. These
error conditions almost can't happen, so users are unlikely to observe
this change.
Reviewed by Tom Lane and Stephen Frost.
Now that pg_dump will properly dump out any ACL changes made to
functions which exist in pg_catalog, switch to using the GRANT system
to manage access to those functions.
This means removing 'if (!superuser()) ereport()' checks from the
functions themselves and then REVOKEing EXECUTE right from 'public' for
these functions in system_views.sql.
Reviews by Alexander Korotkov, Jose Luis Tallon
Now that all of the infrastructure exists, add in the ability to
dump out the ACLs of the objects inside of pg_catalog or the ACLs
for objects which are members of extensions, but only if they have
been changed from their original values.
The original values are tracked in pg_init_privs. When pg_dump'ing
9.6-and-above databases, we will dump out the ACLs for all objects
in pg_catalog and the ACLs for all extension members, where the ACL
has been changed from the original value which was set during either
initdb or CREATE EXTENSION.
This should not change dumps against pre-9.6 databases.
Reviews by Alexander Korotkov, Jose Luis Tallon
Historically, the "dump" component of the namespace has been used
to decide if the objects inside of the namespace should be dumped
also. Given that "dump" is now a bitmask and may be partial, and
we may want to dump out all components of the namespace object but
only some of the components of objects contained in the namespace,
create a "dump_contains" bitmask which will represent what components
of the objects inside of a namespace should be dumped out.
No behavior change here, but in preparation for a change where we
will dump out just the ACLs of objects in pg_catalog, but we might
not dump out the ACL of the pg_catalog namespace itself (for instance,
when it hasn't been changed from the value set at initdb time).
Reviews by Alexander Korotkov, Jose Luis Tallon
pg_dump has historically used a simple boolean 'dump' value to indicate
if a given object should be included in the dump or not. Instead, use
a bitmap which breaks down the components of an object into their
distinct pieces and use that bitmap to only include the components
requested.
This does not include any behavioral change, but is in preperation for
the change to dump out just ACLs for objects in pg_catalog.
Reviews by Alexander Korotkov, Jose Luis Tallon
This new catalog holds the privileges which the system was
initialized with at initdb time, along with any permissions set
by extensions at CREATE EXTENSION time. This allows pg_dump
(and any other similar use-cases) to detect when the privileges
set on initdb-created or extension-created objects have been
changed from what they were set to at initdb/extension-creation
time and handle those changes appropriately.
Reviews by Alexander Korotkov, Jose Luis Tallon
It inserts a new value into an jsonb array at arbitrary position or
a new key to jsonb object.
Author: Dmitry Dolgov
Reviewers: Petr Jelinek, Vitaly Burovoy, Andrew Dunstan
Some object types have names that are only unique for one table. But
for those we generally didn't put the table name into the dump TOC tag.
So it was impossible to identify these objects if the same name was used
for multiple tables. This affects policies, column defaults,
constraints, triggers, and rules.
Fix by adding the table name to the TOC tag, so that it now reads
"$schema $table $object".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.
Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.
(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)
Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com
Previously synchronous replication offered only the ability to confirm
that all changes made by a transaction had been transferred to at most
one synchronous standby server.
This commit extends synchronous replication so that it supports multiple
synchronous standby servers. It enables users to consider one or more
standby servers as synchronous, and increase the level of transaction
durability by ensuring that transaction commits wait for replies from
all of those synchronous standbys.
Multiple synchronous standby servers are configured in
synchronous_standby_names which is extended to support new syntax of
'num_sync ( standby_name [ , ... ] )', where num_sync specifies
the number of synchronous standbys that transaction commits need to
wait for replies from and standby_name is the name of a standby
server.
The syntax of 'standby_name [ , ... ]' which was used in 9.5 or before
is also still supported. It's the same as new syntax with num_sync=1.
This commit doesn't include "quorum commit" feature which was discussed
in pgsql-hackers. Synchronous standbys are chosen based on their priorities.
synchronous_standby_names determines the priority of each standby for
being chosen as a synchronous standby. The standbys whose names appear
earlier in the list are given higher priority and will be considered as
synchronous. Other standby servers appearing later in this list
represent potential synchronous standbys.
The regression test for multiple synchronous standbys is not included
in this commit. It should come later.
Authors: Sawada Masahiko, Beena Emerson, Michael Paquier, Fujii Masao
Reviewed-By: Kyotaro Horiguchi, Amit Kapila, Robert Haas, Simon Riggs,
Amit Langote, Thomas Munro, Sameer Thakur, Suraj Kharage, Abhijit Menon-Sen,
Rajeev Rastogi
Many thanks to the various individuals who were involved in
discussing and developing this feature.
This introduces a new dependency type which marks an object as depending
on an extension, such that if the extension is dropped, the object
automatically goes away; and also, if the database is dumped, the object
is included in the dump output. Currently the grammar supports this for
indexes, triggers, materialized views and functions only, although the
utility code is generic so adding support for more object types is a
matter of touching the parser rules only.
Author: Abhijit Menon-Sen
Reviewed-by: Alexander Korotkov, Álvaro Herrera
Discussion: http://www.postgresql.org/message-id/20160115062649.GA5068@toroid.org
has_parallel_hazard() was ignoring the proparallel markings for
aggregates, which is no good. Fix that. There was no way to mark
an aggregate as actually being parallel-safe, either, so add a
PARALLEL option to CREATE AGGREGATE.
Patch by me, reviewed by David Rowley.
Experimentation shows this only costs about 6kB, which seems well
worth it given the major performance effects that can be caused
by insufficient alignment, especially on larger systems.
Discussion: 14166.1458924422@sss.pgh.pa.us
PL/Python failed if a PL/Python function was invoked recursively via SPI,
since arguments are passed to the function in its global dictionary
(a horrible decision that's far too ancient to undo) and it would delete
those dictionary entries on function exit, leaving the outer recursion
level(s) without any arguments. Not deleting them would be little better,
since the outer levels would then see the innermost level's arguments.
Since PL/Python uses ValuePerCall mode for evaluating set-returning
functions, it's possible for multiple executions of the same SRF to be
interleaved within a query. PL/Python failed in such a case, because
it stored only one iterator per function, directly in the function's
PLyProcedure struct. Moreover, one interleaved instance of the SRF
would see argument values that should belong to another.
Hence, invent code for saving and restoring the argument entries. To fix
the recursion case, we only need to save at recursive entry and restore
at recursive exit, so the overhead in non-recursive cases is negligible.
To fix the SRF case, we have to save when suspending a SRF and restore
when resuming it, which is potentially not negligible; but fortunately
this is mostly a matter of manipulating Python object refcounts and
should not involve much physical data copying.
Also, store the Python iterator and saved argument values in a structure
associated with the SRF call site rather than the function itself. This
requires adding a memory context deletion callback to ensure that the SRF
state is cleaned up if the calling query exits before running the SRF to
completion. Without that we'd leak a refcount to the iterator object in
such a case, resulting in session-lifespan memory leakage. (In the
pre-existing code, there was no memory leak because there was only one
iterator pointer, but what would happen is that the previous iterator
would be resumed by the next query attempting to use the SRF. Hardly the
semantics we want.)
We can buy back some of whatever overhead we've added by getting rid of
PLy_function_delete_args(), which seems a useless activity: there is no
need to delete argument entries from the global dictionary on exit,
since the next time anyone would see the global dict is on the next
fresh call of the PL/Python function, at which time we'd overwrite those
entries with new arg values anyway.
Also clean up some really ugly coding in the SRF implementation, including
such gems as returning directly out of a PG_TRY block. (The only reason
that failed to crash hard was that all existing call sites immediately
exited their own PG_TRY blocks, popping the dangling longjmp pointer before
there was any chance of it being used.)
In principle this is a bug fix; but it seems a bit too invasive relative to
its value for a back-patch, and besides the fix depends on memory context
callbacks so it could not go back further than 9.5 anyway.
Alexey Grishchenko and Tom Lane
This lets us use parallel aggregate for a variety of useful cases
that didn't work before, like sum(int8), sum(numeric), several
versions of avg(), and various other functions.
Add some regression tests, as well, testing the general sanity of
these and future catalog entries.
David Rowley, reviewed by Tomas Vondra, with a few further changes
by me.
Previously non-exclusive backups had to be done using the replication protocol
and pg_basebackup. With this commit it's now possible to make them using
pg_start_backup/pg_stop_backup as well, as long as the backup program can
maintain a persistent connection to the database.
Doing this, backup_label and tablespace_map are returned as results from
pg_stop_backup() instead of being written to the data directory. This makes
the server safe from a crash during an ongoing backup, which can be a problem
with exclusive backups.
The old syntax of the functions remain and work exactly as before, but since the
new syntax is safer this should eventually be deprecated and removed.
Only reference documentation is included. The main section on backup still needs
to be rewritten to cover this, but since that is already scheduled for a separate
large rewrite, it's not included in this patch.
Reviewed by David Steele and Amit Kapila
As noted by Julian Schauder in bug #14063, the configuration-file parser
doesn't support embedded newlines in string literals. While there might
someday be a good reason to remove that restriction, there doesn't seem
to be one right now. However, ALTER SYSTEM SET could accept strings
containing newlines, since many of the variable-specific value-checking
routines would just see a newline as whitespace. This led to writing a
postgresql.auto.conf file that was broken and had to be removed manually.
Pending a reason to work harder, just throw an error if someone tries this.
In passing, fix several places in the ALTER SYSTEM logic that failed to
provide an errcode() for an ereport(), and thus would falsely log the
failure as an internal XX000 error.
Back-patch to 9.4 where ALTER SYSTEM was introduced.
Alex Shulgin complained that the underlying strategy wasn't all that
apparent, particularly not the fact that we intentionally have two
code paths depending on whether we think the column has a limited set
of possible values or not. Try to make it clearer.
On reflection, the pre-existing logic in ANALYZE is specifically meant to
compare the frequency of a candidate MCV against the estimated frequency of
a random distinct value across the whole table. The change to compare it
against the average frequency of values actually seen in the sample doesn't
seem very principled, and if anything it would make us less likely not more
likely to consider a value an MCV. So revert that, but keep the aspect of
considering only nonnull values, which definitely is correct.
In passing, rename the local variables in these stanzas to
"ndistinct_table", to avoid confusion with the "ndistinct" that appears at
an outer scope in compute_scalar_stats.
\gexec executes the just-entered query, like \g, but instead of printing
the results it takes each field as a SQL command to send to the server.
Computing a series of queries to be executed is a fairly common thing,
but up to now you always had to resort to kluges like writing the queries
to a file and then inputting the file. Now it can be done with no
intermediate step.
The implementation is fairly straightforward except for its interaction
with FETCH_COUNT. ExecQueryUsingCursor isn't capable of being called
recursively, and even if it were, its need to create a transaction
block interferes unpleasantly with the desired behavior of \gexec after
a failure of a generated query (i.e., that it can continue). Therefore,
disable use of ExecQueryUsingCursor when doing the master \gexec query.
We can still apply it to individual generated queries, however, and there
might be some value in doing so.
While testing this feature's interaction with single-step mode, I (tgl) was
led to conclude that SendQuery needs to recognize SIGINT (cancel_pressed)
as a negative response to the single-step prompt. Perhaps that's a
back-patchable bug fix, but for now I just included it here.
Corey Huinker, reviewed by Jim Nasby, Daniel Vérité, and myself
This elevel is useful for logging audit messages and similar information
that should not be passed to the client. It's equivalent to LOG in terms
of decisions about logging priority in the postmaster log, but messages
with this elevel will never be sent to the client.
In the current implementation, it's just an alias for the longstanding
COMMERROR elevel (or more accurately, we've made COMMERROR an alias for
this). At some point it might be interesting to allow a LOG_ONLY flag to
be attached to any elevel, but that would be considerably more complicated,
and it's not clear there's enough use-cases to justify the extra work.
For now, let's just take the easy 90% solution.
David Steele, reviewed by Fabien Coelho, Petr Jelínek, and myself
The first iteration of the signal-checking loop would compute sigmask(0)
which expands to 1<<(-1) which is undefined behavior according to the
C standard. The lack of field reports of trouble suggest that it
evaluates to 0 on all existing Windows compilers, but that's hardly
something to rely on. Since signal 0 isn't a queueable signal anyway,
we can just make the loop iterate from 1 instead, and save a few cycles
as well as avoiding the undefined behavior.
In passing, avoid evaluating the volatile expression UNBLOCKED_SIGNAL_QUEUE
twice in a row; there's no reason to waste cycles like that.
Noted by Aleksander Alekseev, though this isn't his proposed fix.
Back-patch to all supported branches.
When adjusting the estimate for the number of distinct values from a
rel in a grouped query to take into account the selectivity of the
rel's restrictions, use a formula that is less likely to produce
under-estimates.
The old formula simply multiplied the number of distinct values in the
rel by the restriction selectivity, which would be correct if the
restrictions were fully correlated with the grouping expressions, but
can produce significant under-estimates in cases where they are not
well correlated.
The new formula is based on the random selection probability, and so
assumes that the restrictions are not correlated with the grouping
expressions. This is guaranteed to produce larger estimates, and of
course risks over-estimating in cases where the restrictions are
correlated, but that has less severe consequences than
under-estimating, which might lead to a HashAgg that consumes an
excessive amount of memory.
This could possibly be improved upon in the future by identifying
correlated restrictions and using a hybrid of the old and new
formulae.
Author: Tomas Vondra, with some hacking be me
Reviewed-by: Mark Dilger, Alexander Korotkov, Dean Rasheed and Tom Lane
Discussion: http://www.postgresql.org/message-id/flat/56CD0381.5060502@2ndquadrant.com
If archive_timeout > 0 we should avoid logging XLOG_RUNNING_XACTS if idle.
Bug 13685 reported by Laurence Rowe, investigated in detail by Michael Paquier,
though this is not his proposed fix.
20151016203031.3019.72930@wrigleys.postgresql.org
Simple non-invasive patch to allow later backpatch to 9.4 and 9.5
Replay of XLOG_BTREE_VACUUM during Hot Standby was previously thought to require
complex interlocking that matched the requirements on the master. This required
an O(N) operation that became a significant problem with large indexes, causing
replication delays of seconds or in some cases minutes while the
XLOG_BTREE_VACUUM was replayed.
This commit skips the pin scan that was previously required, by observing in
detail when and how it is safe to do so, with full documentation. The pin
scan is skipped only in replay; the VACUUM code path on master is not
touched here and WAL is identical.
The current commit applies in all cases, effectively replacing commit
687f2cd7a0.
Often, upon getting an unexpected error in psql, one's first wish is that
the verbosity setting had been higher; for example, to be able to see the
schema-name field or the server code location info. Up to now the only way
has been to adjust the VERBOSITY variable and repeat the failing query.
That's a pain, and it doesn't work if the error isn't reproducible.
This commit adds a psql feature that redisplays the most recent server
error at full verbosity, without needing to make any variable changes or
re-execute the failed command. We just need to hang onto the latest error
PGresult in case the user executes \errverbose, and then apply libpq's
new PQresultVerboseErrorMessage() function to it. This will consume
some trivial amount of psql memory, but otherwise the cost when the
feature isn't used should be negligible.
Alex Shulgin, reviewed by Daniel Vérité, some improvements by me
Often, upon getting an unexpected error in psql, one's first wish is that
the verbosity setting had been higher; for example, to be able to see the
schema-name field or the server code location info. Up to now the only way
has been to adjust the VERBOSITY variable and repeat the failing query.
That's a pain, and it doesn't work if the error isn't reproducible.
This commit adds support in libpq for regenerating the error message for
an existing error PGresult at any desired verbosity level. This is almost
just a matter of refactoring the existing code into a subroutine, but there
is one bit of possibly-needed information that was not getting put into
PGresults: the text of the last query sent to the server. We must add that
string to the contents of an error PGresult. But we only need to save it
if it might be used, which with the existing error-formatting code only
happens if there is a PG_DIAG_STATEMENT_POSITION error field, which is
probably pretty rare for errors in production situations. So really the
overhead when the feature isn't used should be negligible.
Alex Shulgin, reviewed by Daniel Vérité, some improvements by me
Some buildfarm members are showing "comparison is always false due to
limited range of data type" complaints on this test, so #ifdef it out
on machines with 32-bit int.
As with the previous patch, large numbers of null rows could skew this
calculation unfavorably, causing us to discard values that have a
legitimate claim to be MCVs, since our definition of MCV is that it's
most common among the non-null population of the column. Hence, make
the numerator of avgcount be the number of non-null sample values not
the number of sample rows; likewise for maxmincount in the
compute_scalar_stats variant.
Also, make the denominator be the number of distinct values actually
observed in the sample, rather than reversing it back out of the computed
stadistinct. This avoids depending on the accuracy of the Haas-Stokes
approximation, and really it's what we want anyway; the threshold should
depend only on what we see in the sample, not on what we extrapolate
about the contents of the whole column.
Alex Shulgin, reviewed by Tomas Vondra and myself
Previously, we included null rows in the values of n and N that went
into the formula, which amounts to considering null as a value in its
own right; but the d and f1 values do not include nulls. This is
inconsistent, and it contributes to significant underestimation of
ndistinct when the column is mostly nulls. In any case stadistinct
is defined as the number of distinct non-null values, so we should
exclude nulls when doing this computation.
This is an aboriginal bug in our application of the Haas-Stokes formula,
but we'll refrain from back-patching for fear of destabilizing plan
choices in released branches.
While at it, make the code a bit more readable by omitting unnecessary
casts and intermediate variables.
Observation and original patch by Tomas Vondra, adjusted to fix both
uses of the formula by Alex Shulgin, cosmetic improvements by me
In the test_slot_timelines test module, we were abusing passing NULL
values which was received as zeroes in x86, but this breaks in ARM
(buildfarm member hamster) by crashing instead. Fix the breakage by
marking these functions as STRICT; the InvalidXid value that was
previously implicit in NULL values (on x86 at least) can now be passed
as 0. Failing to follow the fmgr protocol to check for NULLs beforehand
was causing ARM to fail, as evidenced by segmentation faults in
buildfarm member hamster.
In order to use the new functionality in the test script, use COALESCE
in the right spot to avoid forwarding NULL values.
This was diagnosed from the hamster crash by Craig Ringer, who also
proposed a different patch (checking for NULL values explicitely in the
C function code, and keeping the non-strictness in the C functions).
I decided to go with this approach instead.
Our actual convention, contrary to what I said in 59a2111b23, is not to
quote type names, as evidenced by unquoted use of format_type_be()
result value in error messages. Remove quotes from recently tweaked
messages accordingly.
Per note from Tom Lane
Commit acdf2a8b added a test case involving minus zero as a box endpoint.
This is not very portable, as evidenced by the several older buildfarm
members that are failing on the test because they print minus zero as
just "0". If there were any significant reason to test this behavior,
we could consider carrying a separate expected-file; but it doesn't look
to me like there's adequate justification to accept such a maintenance
burden. Just change the test to use plain zero, instead.
When getParamDescriptions was changed to handle out-of-memory better
by cribbing error recovery logic from getRowDescriptions/getAnotherTuple,
somebody omitted to copy the stanza about checking for excess data in
the message. But you need to do that, since continue'ing out of the
switch in pqParseInput3 means no such check gets applied there anymore.
Noted while looking at Michael Paquier's patch that made yet another
copy of this advance_and_error logic.
(This whole business desperately needs refactoring, because I sure don't
want to see a dozen copies of this code, but that's where we seem to be
headed. What's more, the "suspend parsing on EOF return" convention is a
holdover from protocol 2 and shouldn't exist at all in protocol 3, because
we don't process partial messages anymore. But for now, just fix the
obvious bug.)
Also, fix some wrong/missing comments about what the API spec is
for these three functions.
This doesn't seem worthy of back-patching, even though it's a bug;
the case shouldn't ever arise in the field.
This interface is designed to give an access to WAL for extensions which
could implement new access method, for example. Previously it was
impossible because restoring from custom WAL would need to access system
catalog to find a redo custom function. This patch suggests generic way
to describe changes on page with standart layout.
Bump XLOG_PAGE_MAGIC because of new record type.
Author: Alexander Korotkov with a help of Petr Jelinek, Markus Nullmeier and
minor editorization by my
Reviewers: Petr Jelinek, Alvaro Herrera, Teodor Sigaev, Jim Nasby,
Michael Paquier
I should have remembered that we can't use INT64_MODIFIER with sscanf():
configure chooses that to work with snprintf(), but it might be for our
src/port/snprintf.c implementation and so not compatible with the
platform's sscanf(). This appears to be the explanation for buildfarm
member frogmouth's continuing unhappiness with the tzcode update.
Fortunately, in all of the places where zic is attempting to read into
an int64 variable, it's reading a year which certainly will fit just fine
into an int. So make it read into an int with %d, and then cast or copy
as necessary.
Previously this test was relying too much on WAL replay to occur in the
exact configured interval, which was unreliable on slow or overly busy
servers. Use a custom loop instead of poll_query_until, which is
hopefully more reliable.
Per continued failures on buildfarm member hamster (which is probably
the only one running this test suite)
Author: Michaël Paquier
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
When decoding from a logical slot, it's necessary for xlog reading to be
able to read xlog from historical (i.e. not current) timelines;
otherwise, decoding fails after failover, because the archives are in
the historical timeline. This is required to make "failover logical
slots" possible; it currently has no other use, although theoretically
it could be used by an extension that creates a slot on a standby and
continues to replay from the slot when the standby is promoted.
This commit includes a module in src/test/modules with functions to
manipulate the slots (which is not otherwise possible in SQL code) in
order to enable testing, and a new test in src/test/recovery to ensure
that the behavior is as expected.
Author: Craig Ringer
Reviewed-By: Oleksii Kliukin, Andres Freund, Petr Jelínek
Some minor tweaks and comment additions, for cleanliness sake and to
avoid having the upcoming timeline-following patch be polluted with
unrelated cleanup.
Extracted from a larger patch by Craig Ringer, reviewed by Andres
Freund, with some additions by myself.
Formerly, the geometric I/O routines such as box_in and point_out relied
directly on strtod() and sprintf() for conversion of the float8 component
values of their data types. However, the behavior of those functions is
pretty platform-dependent, especially for edge-case values such as
infinities and NaNs. This was exposed by commit acdf2a8b37, which
added test cases involving boxes with infinity endpoints, and immediately
failed on Windows and AIX buildfarm members. We solved these problems
years ago in the main float8in and float8out functions, so let's fix it
by making the geometric types use that code instead of depending directly
on the platform-supplied functions.
To do this, refactor the float8in code so that it can be used to parse
just part of a string, and as a convenience make the guts of float8out
usable without going through DirectFunctionCall.
While at it, get rid of geo_ops.c's fairly shaky assumptions about the
maximum output string length for a double, by having it build results in
StringInfo buffers instead of fixed-length strings.
In passing, convert all the "invalid input syntax for type foo" messages
in this area of the code into "invalid input syntax for type %s" to reduce
the number of distinct translatable strings, per recent discussion.
We would have needed a fair number of the latter anyway for code-sharing
reasons, so we might as well just go whole hog.
Note: this patch is by no means intended to guarantee that the geometric
types uniformly behave sanely for infinity or NaN component values.
But any bugs we have in that line were there all along, they were just
harder to reach in a platform-independent way.
My compiler doesn't like the lack of initialization of "flag", and
I think it's right: if there were zero keys we'd have an undefined
result. The AND of zero items is TRUE, so initialize to TRUE.
Patch implements quad-tree over boxes, naive approach of 2D quad tree will not
work for any non-point objects because splitting space on node is not
efficient. The idea of pathc is treating 2D boxes as 4D points, so,
object will not overlap (in 4D space).
The performance tests reveal that this technique especially beneficial
with too much overlapping objects, so called "spaghetti data".
Author: Alexander Lebedev with editorization by Emre Hasegeli and me
During scan sometimes it would be very helpful to know some information about
parent node or all ancestor nodes. Right now reconstructedValue could be used
but it's not a right usage of it (range opclass uses that).
traversalValue is arbitrary piece of memory in separate MemoryContext while
reconstructedVale should have the same type as indexed column.
Subsequent patches for range opclass and quad4d tree will use it.
Author: Alexander Lebedev, Teodor Sigaev
Reporting the specific out-of-range input value produces platform-dependent
results. We could skip reporting the value, but that's contrary to our
message style guidelines and unhelpful to users. Or we could add a
separate expected-output file for Windows, but that would be a substantial
maintenance burden, and these test cases seem unlikely to be worth it.
Per buildfarm.
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
interval_mul() attempts to prevent its calculations from producing silly
results, but it forgot that zero times infinity yields NaN in IEEE
arithmetic. Hence, a case like '1 second'::interval * 'infinity'::float8
produced a NaN for the months product, which didn't trigger the range
check, resulting in bogus and possibly platform-dependent output.
This isn't terribly obvious to the naked eye because if you try that
exact case, you get "interval out of range" which is what you expect
--- but if you look closer, the error is coming from interval_out not
interval_mul. interval_mul has allowed a bogus value into the system.
Fix by adding isnan tests.
Noted while testing Vitaly Burovoy's fix for infinity input to
to_timestamp(). Given the lack of field complaints, I doubt this
is worth a back-patch.
With the original SQL-function implementation, such cases failed because
we don't support infinite intervals. Converting the function to C lets
us bypass the interval representation, which should be a bit faster as
well as more flexible.
Vitaly Burovoy, reviewed by Anastasia Lubennikova
resulttypeLen and resulttypeByVal must be set correctly when serializing
aggregates, not just when finalizing them. This was in David's final
patch but I downloaded the wrong version by mistake and failed to spot
the error.
David Rowley
This is necessary infrastructure for supporting parallel aggregation
for aggregates whose transition type is "internal". Such values
can't be passed between cooperating processes, because they are
just pointers.
David Rowley, reviewed by Tomas Vondra and by me.
This refines the previous weight range and allows a script to be "turned
off" by passing a zero weight, which is useful when scripting multiple
pgbench runs.
I did not apply the suggested warning when a script uses zero weight; we
use the principle elsewhere that if there's nothing to be done, do
nothing quietly.
Adjust docs accordingly.
Author: Jeff Janes, Fabien Coelho
You can now do the same thing via \set using the appropriate function,
either random(), random_gaussian(), or random_exponential(), depending
on the desired distribution. This is not backward-compatible, but per
discussion, it's worth it to avoid having the old syntax hang around
forever.
Fabien Coelho, reviewed by Michael Paquier, and adjusted by me.
Whenever this function is used with the FORMAT_MESSAGE_FROM_SYSTEM flag,
it's good practice to include FORMAT_MESSAGE_IGNORE_INSERTS as well.
Otherwise, if the message contains any %n insertion markers, the function
will try to fetch argument strings to substitute --- which we are not
passing, possibly leading to a crash. This is exactly analogous to the
rule about not giving printf() a format string you're not in control of.
Noted and patched by Christian Ullrich.
Back-patch to all supported branches.
When tsearch was implemented I did several mistakes in hostname/email
definition rules:
1) allow underscore in hostname what prohibited by RFC
2) forget to allow leading digits separated by hyphen (like 123-x.com)
in hostname
3) do no allow underscore/hyphen after leading digits in localpart of email
Artur's patch resolves two last issues, but by the way allows hosts name like
123_x.com together with 123-x.com. RFC forbids underscore usage in hostname
but pg allows that since initial tsearch version in core, although only
for non-digits. Patch syncs support digits and nondigits in both hostname and
email.
Forbidding underscore in hostname may break existsing usage of tsearch and,
anyhow, it should be done by separate patch.
Author: Artur Zakirov
BUG: #13964
Per discussion, the new extensible node framework is thought to be
better designed than the custom path/scan/scanstate stuff we added
in PostgreSQL 9.5. Rework the latter to be more like the former.
This is not backward-compatible, but we generally don't promise that
for C APIs, and there probably aren't many people using this yet
anyway.
KaiGai Kohei, reviewed by Petr Jelinek and me. Some further
cosmetic changes by me.
The IANA crew seem to think that symlink() exists everywhere nowadays,
and they may well be right. But we use #ifdef HAVE_SYMLINK elsewhere
so for consistency we should do it here too. Noted by Michael Paquier.
The new coding of dolink() is dependent on link() returning an on-point
errno when it fails; but the quick-hack implementation of link() that
we'd put in for Windows didn't bother with setting errno. Fix that.
Analysis and patch by Christian Ullrich.
INT64_MIN/MAX should be spelled PG_INT64_MIN/MAX, per well established
convention in our sources. Less obviously, a symbol named DOUBLE causes
problems on Windows builds, so rename that to DOUBLE_CONST; and rename
INTEGER to INTEGER_CONST for consistency.
Also, get rid of incorrect/obsolete hand-munging of yycolumn, and fix
the grammar for float constants to handle expected cases such as ".1".
First two items by Michael Paquier, second two by me.
Commit fbe5a3fb73 accidentally changed
this behavior; put things back the way they were, and add some
regression tests.
Report by Andres Freund; patch by Ashutosh Bapat, with a bit of
kibitzing by me.
Up until now, we've been using timezone and tzname, but Visual Studio
2015 (for which we wish to add support) no longer declares those
symbols. All versions since Visual Studio 2003 apparently support the
underscore-equipped names, and we don't support anything older than
Visual Studio 2005, so this should work OK everywhere. But let's see
what the buildfarm thinks.
Michael Paquier, reviewed by Petr Jelinek
The new functions are pi(), random(), random_exponential(),
random_gaussian(), and sqrt(). I was worried that this would be
slower than before, but, if anything, it actually turns out to be
slightly faster, because we now express the built-in pgbench scripts
using fewer lines; each \setrandom can be merged into a subsequent
\set.
Fabien Coelho
Corrects an oversight in 2c83f435a3 where the $timed_out reference var
isn't initialized; using it would require the caller to initialize it
beforehand, which is cumbersome.
Author: Craig Ringer
This brings us a bit closer to matching upstream, but since it affects
files outside src/timezone/, we might choose not to back-patch it.
Hence keep it separate from the main update patch.
We hadn't done this in about six years, which proves to have been a mistake
because there's been a lot of code churn upstream, making the merge rather
painful. But putting it off any further isn't going to lessen the pain,
and there are at least two incompatible changes that we need to absorb
before someone starts complaining that --with-system-tzdata doesn't work
at all on their platform, or we get blindsided by a tzdata release that
our out-of-date zic can't compile. Last week's "time zone abbreviation
differs from POSIX standard" mess was a wake-up call in that regard.
This is a sufficiently large patch that I'm afraid to back-patch it
immediately, though the foregoing considerations imply that we probably
should do so eventually. For the moment, just put it in HEAD so that
it can get some testing. Maybe we can wait till the end of the 9.6
beta cycle before deeming it okay.
Change the slightly different variations of the message
function FOO must return type BAR
to a single wording, removing the variability in type name so that they
all create a single translation entry; since the type name is not to be
translated, there's no point in it being part of the message anyway.
Also, change them all to use the same quoting convention, namely that
the function name is not to be quoted but the type name is. (I'm not
quite sure why this is so, but it's the clear majority.)
Some similar messages such as "encoding conversion function FOO must ..."
are also changed.
In the plancache, we check if the environment we planned the query under
has changed in a way which requires us to re-plan, such as when the user
for whom the plan was prepared changes and RLS is being used (and,
therefore, there may be different policies to apply).
Unfortunately, while those values were set and checked, they were not
being reset when the query was re-planned and therefore, in cases where
we change role, re-plan, and then change role again, we weren't
re-planning again. This leads to potentially incorrect policies being
applied in cases where role-specific policies are used and a given query
is planned under one role and then executed under other roles, which
could happen under security definer functions or when a common user and
query is planned initially and then re-used across multiple SET ROLEs.
Further, extensions which made use of CopyCachedPlan() may suffer from
similar issues as the RLS-related fields were not properly copied as
part of the plan and therefore RevalidateCachedQuery() would copy in the
current settings without invalidating the query.
Fix by using the same approach used for 'search_path', where we set the
correct values in CompleteCachedPlan(), check them early on in
RevalidateCachedQuery() and then properly reset them if re-planning.
Also, copy through the values during CopyCachedPlan().
Pointed out by Ashutosh Bapat. Reviewed by Michael Paquier.
Back-patch to 9.5 where RLS was introduced.
Security: CVE-2016-2193
Fix up check for high-bit-set characters, which provoked "comparison is
always true due to limited range of data type" warnings on some compilers,
and was unlike the way we do it elsewhere anyway. Fix omission of "$"
from the set of valid identifier continuation characters. Get rid of
sanitize_text(), which was utterly inconsistent with any other error report
anywhere in the system, and wasn't even well designed on its own terms
(double-quoting the result string without escaping contained double quotes
doesn't seem very well thought out). Fix up error messages, which didn't
follow the message style guidelines very well, and were overly specific in
situations where the actual mistake might not be what they said. Improve
documentation.
(I started out just intending to fix the compiler warning, but the more
I looked at the patch the less I liked it.)
If the referenced rel was proven empty, we'd compute 0/0 here, which
results in the function returning NaN. That's a bit more serious
than the other zero-divide case. Still, it only seems to be possible
in HEAD, so no back-patch.
Per report from Piotr Stefaniak. I looked through the rest of selfuncs.c
and found no other likely trouble spots.
This avoids a possible divide-by-zero in the following calculation,
and rounding the number to an integer seems like saner behavior anyway.
Assuming IEEE math, the division would yield +Infinity which would get
replaced by 1.0 at the bottom of the function, so nothing really
interesting would ensue; but avoiding divide-by-zero seems like a
good idea on general principles.
Per report from Piotr Stefaniak. No back-patch since this seems
mostly cosmetic.
Previously pg_rewind did not fsync any files. That's problematic, given
that the target directory is modified. If the database was started
afterwards, 2ce439f33 luckily already caused the data directory to be
synced to disk at postmaster startup; reducing the scope of the problem.
To fix, use initdb -S, at the end of the pg_rewind run. It doesn't seem
worthwhile to duplicate the code into pg_rewind, and initdb -S is
already used that way by pg_upgrade.
Reported-By: Andres Freund
Author: Michael Paquier, somewhat edited by me
Discussion: 20160310034352.iuqgvpmg5qmnxtkz@alap3.anarazel.deCAB7nPqSytVG1o4S3S2pA1O=692ekurJ+fckW2PywEG3sNw54Ow@mail.gmail.com
Backpatch: 9.5, where pg_rewind was introduced
This was a relatively harmless leak, as createBackupLabel() is only
called once per pg_rewind invocation.
Author: Michael Paquier
Reported-By: Michael Paquier
Discussion: CAB7nPqRnOw30gOXe2_SPLjh37bgm4V+txbYAPwoXb97nGQ297w@mail.gmail.com
Backpatch: 9.5, where pg_rewind was introduced
Returning the direct result of bit arithmetic, in a macro intended to be
used in a boolean manner, can be problematic if the return value is
stored in a variable of type 'bool'. If bool is implemented using C99's
_Bool, that can lead to comparison failures if the variable is then
compared again with the expression (see ginStepRight() for an example
that fails), as _Bool forces the result to be 0/1. That happens in some
configurations of newer MSVC compilers. It's also problematic when
storing the result of such an expression in a narrower type.
Several gin macros have been declared in that style since gin's initial
commit in 8a3631f8d8.
There's a lot more macros like this, but this is the only one causing
regression test failures; and I don't want to commit and backpatch a
larger patch with lots of conflicts just before the next set of minor
releases.
Discussion: 20150811154237.GD17575@awork2.anarazel.de
Backpatch: All supported branches
We really need to sync all of our IANA-derived timezone code with upstream,
but that's going to be a large patch and I certainly don't care to shove
such a thing into stable branches immediately before a release. As a
stopgap, copy just the tzcode2016c logic that checks validity of timezone
abbreviations. This prevents getting multiple "time zone abbreviation
differs from POSIX standard" bleats with tzdata 2014b and later.
cost_subplan() supposed that the given subplan must have plan_rows > 0,
which as far as I can tell was true until recent refactoring of the
code in createplan.c; but now that code allows the Result for a provably
empty subquery to have plan_rows = 0. Rather than undo that change,
put in a clamp to prevent zero divide.
get_cheapest_fractional_path() likewise supposed that best_path->rows > 0.
This assumption has been wrong for longer. It's actually harmless given
IEEE float math, because a positive value divided by zero gives +Infinity
and compare_fractional_path_costs() will do the right thing with that.
Still, best not to assume that.
final_cost_nestloop() also seems to have some risks in this area, so
borrow the clamping logic already present in the mergejoin cost functions.
Lastly, remove unnecessary clamp_row_est() in planner.c's calls to
get_number_of_groups(). The only thing that function does with path_rows
is pass it to estimate_num_groups() which already has an internal clamp,
so we don't need the extra call; and if we did, the callers are arguably
the wrong place for it anyway.
First two items reported by Piotr Stefaniak, the others are products
of my nosing around for similar problems. No back-patch since there's
no evidence that problems arise in the back branches.
DST law changes in Azerbaijan, Chile, Haiti, Palestine, and Russia (Altai,
Astrakhan, Kirov, Sakhalin, Ulyanovsk regions). Historical corrections
for Lithuania, Moldova, Russia (Kaliningrad, Samara, Volgograd).
As of 2015b, the keepers of the IANA timezone database started to use
numeric time zone abbreviations (e.g., "+04") instead of inventing
abbreviations not found in the wild like "ASTT". This causes our rather
old copy of zic to whine "warning: time zone abbreviation differs from
POSIX standard" several times during "make install". This warning is
harmless according to the IANA folk, and I don't see any problems with
these abbreviations in some simple tests; but it seems like now would be
a good time to update our copy of the tzcode stuff. I'll look into that
soon.
We don't really want to encourage people to write numeric SQLSTATEs in
programs; that's unreadable and error-prone. Copy plpgsql's infrastructure
for converting between SQLSTATEs and exception names shown in Appendix A,
and modify examples in tests and documentation to do it that way.
Tcl has a convention for returning additional info about an error in a
global variable named errorCode. Up to now PL/Tcl has ignored that,
but this patch causes database errors caught by PL/Tcl to fill in
errorCode with useful information from the ErrorData struct.
Jim Nasby, reviewed by Pavel Stehule and myself
This avoids leaving dangling links in pg_operator; which while fairly
harmless are also unsightly.
While we're at it, simplify OperatorUpd, which went through
heap_modify_tuple for no very good reason considering it had already made
a tuple copy it could just scribble on.
Roma Sokolov, reviewed by Tomas Vondra, additional hacking by Robert Haas
and myself.
In commit 9118d03a8c we taught the planner to postpone evaluation of
set-returning functions in a SELECT's targetlist until after any sort done
to satisfy ORDER BY. However, if we postpone some SRFs this way while
others do not get postponed (because they're sort or group key columns)
we will break the traditional behavior by which all SRFs in the tlist run
in-step during ExecTargetList(), so that you get the least common multiple
of their periods not the product. Fix make_sort_input_target() so it will
not split up SRF evaluation in such cases.
There is still a hazard of similar odd behavior if there's a SRF in a
grouping column and another one that isn't, but that was true before
and we're just trying to preserve bug-compatibility with the traditional
behavior. This whole area is overdue to be rethought and reimplemented,
but we'll try to avoid changing behavior until then.
Per report from Regina Obe.
Some of the non-MSVC Windows buildfarm members seem to need this to avoid
getting "undefined symbol" errors on libpgfeutils' references to libpq.
I could understand that if libpq were a static library, but surely it is
not? Oh well, at least the extra reference is no more harmful than it is
for libpgcommon or libpgport.
This completes (at least for now) the project of getting rid of ad-hoc
linkages among the src/bin/ subdirectories. Everything they share is now
in src/fe_utils/ and is included from a static library at link time.
A side benefit is that we can restore the FLEX_NO_BACKUP check for
psqlscanslash.l. We might need to think of another way to do that check
if we ever need to build two lexers with that property in the same source
directory, but there's no foreseeable reason to need that.
Compilers that don't know that elog(ERROR) doesn't return complained
that this function might fail to return a value. Per buildfarm.
While at it, const-ify the function's declaration, since the intent
is evidently to always return a constant string.
Per discussion, we want to create a static library and put the stuff into
it that until now has been shared across src/bin/ directories by ad-hoc
methods like symlinking a source file. This commit creates the library and
populates it with a couple of files that contain the widely-useful portions
of pg_dump's dumputils.c file. dumputils.c survives, because it has some
stuff that didn't seem appropriate for fe_utils, but it's significantly
smaller and is no longer referenced from any other directory.
Follow-on patches will move more stuff into fe_utils.
The Mkvcbuild.pm hacking here is just a best guess; we'll see how the
buildfarm likes it.
This enables external code to create access methods. This is useful so
that extensions can add their own access methods which can be formally
tracked for dependencies, so that DROP operates correctly. Also, having
explicit support makes pg_dump work correctly.
Currently only index AMs are supported, but we expect different types to
be added in the future.
Authors: Alexander Korotkov, Petr Jelínek
Reviewed-By: Teodor Sigaev, Petr Jelínek, Jim Nasby
Commitfest-URL: https://commitfest.postgresql.org/9/353/
Discussion: https://www.postgresql.org/message-id/CAPpHfdsXwZmojm6Dx+TJnpYk27kT4o7Ri6X_4OSWcByu1Rm+VA@mail.gmail.com
Now that we have src/common/ for code shared between frontend and backend,
we can get rid of (most of) the klugy ways that the keyword table and
keyword lookup code were formerly shared between different uses.
This is a first step towards a more general plan of getting rid of
special-purpose kluges for sharing code in src/bin/.
I chose to merge kwlookup.c back into keywords.c, as it once was, and
always has been so far as keywords.h is concerned. We could have
kept them separate, but there is noplace that uses ScanKeywordLookup
without also wanting access to the backend's keyword list, so there
seems little point.
ecpg is still a bit weird, but at least now the trickiness is documented.
I think that the MSVC build script should require no adjustments beyond
what's done here ... but we'll soon find out.
Unfortunately, every version of glibc thus far tested has bugs whereby
strcoll() ordering does not match strxfrm() ordering as required by
the standard. This can result in, for example, corrupted indexes.
Disabling abbreviated keys in these cases slows down non-C-collation
string sorting considerably, but there seems to be no practical
alternative. Users who are confident that their libc implementations
are solid in this regard can re-enable the optimization by compiling
with TRUST_STRXFRM.
Users who have built indexes using PostgreSQL 9.5 or PostgreSQL 9.5.1
should REINDEX if there is a possibility that they may have been
affected by this problem.
Report by Marc-Olaf Jaschke. Investigation mostly by Tom Lane, with
help from Peter Geoghegan, Noah Misch, Stephen Frost, and me. Patch
by me, reviewed by Peter Geoghegan and Tom Lane.
Without this, contention on the freelist can become a pretty serious
problem on large servers.
Aleksander Alekseev, reviewed by Anastasia Lubennikova, Dilip Kumar,
and me.
User-facing (even tested by regression tests) error conditions were thrown
with elog(), hence had wrong SQLSTATE and were untranslatable. And the
error message texts weren't up to project style, either.
jsonb_set() could produce wrong answers or incorrect error reports, or in
the worst case even crash, when trying to convert a path-array element into
an integer for use as an array subscript. Per report from Vitaly Burovoy.
Back-patch to 9.5 where the faulty code was introduced (in commit
c6947010ce).
Michael Paquier
In commit afb9249d06, we (probably I) made ExecLockRows assign
null test tuples to all relations of the query while setting up to do an
EvalPlanQual recheck for a newly-updated locked row. This was sheerest
brain fade: we should only set test tuples for relations that are lockable
by the LockRows node, and in particular empty test tuples are only sensible
for inheritance child relations that weren't the source of the current
tuple from their inheritance tree. Setting a null test tuple for an
unrelated table causes it to return NULLs when it should not, as exhibited
in bug #14034 from Bronislav Houdek. To add insult to injury, doing it the
wrong way required two loops where one would suffice; so the corrected code
is even a bit shorter and faster.
Add a regression test case based on his example, and back-patch to 9.5
where the bug was introduced.
Instead of just "2" seconds, allow eg. "2.5" seconds. Per request
from Alvaro Herrera. No docs change since the docs didn't say you
couldn't do this already.
Include the \pset title string if there is one, and shorten the prefab
part of the header to be "timestamp (every Ns)". Per suggestion by
David Johnston.
Michael Paquier and Tom Lane
Parallel workers can now partially aggregate the data and pass the
transition values back to the leader, which can combine the partial
results to produce the final answer.
David Rowley, based on earlier work by Haribabu Kommi. Reviewed by
Álvaro Herrera, Tomas Vondra, Amit Kapila, James Sewell, and me.
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com20160114143931.GG10941@awork2.anarazel.de
Previously latches for windows and unix had been implemented in
different files. A later patch introduce an expanded wait
infrastructure, keeping the implementation separate would introduce too
much duplication.
This basically just moves the functions, without too much change. The
reason to keep this separate is that it allows blame to continue working
a little less badly; and to make review a tiny bit easier.
Discussion: 20160114143931.GG10941@awork2.anarazel.de
After the previous fix in 6f1f34c9 msvc ended up looking for psqlscan.c
in the wrong directory.
David's fix just forces the path to be adjusted. That's not a
particularly pretty fix, but it hopefully will make the buildfarm green
again.
Author: David Rowley
Discussion: CAKJS1f_9CCi_t+LEgV5GWoCj3wjavcMoDc5qfcf_A0UwpQoPoA@mail.gmail.com
The point of this change is to use %pure-parser in pgbench's exprparse.y.
The immediate reason is that it turns out very ancient versions of bison
have a bug with the combination of a reentrant lexer and non-reentrant
parser. We could consider dropping support for such ancient bisons; but
considering that we might well need exprparse.y to be reentrant some day,
it seems better to make it so right now than to move the portability
goalposts. (AFAICT there's no particular performance consequence to this
change, either, so there's no good reason not to do it.)
Now, %pure-parser assumes that the called lexer is built with %option
bison-bridge. Because we're assuming bitwise compatibility of yyscan_t
(yyguts_t) data structures among all the psql/pgbench lexers, that
requirement propagates back to psql's lexers as well. But it's just a
few lines of change on that side too; and if psqlscan.l is to set the
baseline for a possibly-large family of lexers, it should err on the
side of including not omitting useful features.
pgbench now needs to use src/bin/psql/psqlscan.l, but it's not very clear
how to fit that into the MSVC build system. If this doesn't work I'm going
to need some help from somebody who actually understands those scripts ...
To allow multiline SQL commands in scripts, adopt the same rules psql uses
to decide what is the end of a SQL command, to wit, an unquoted semicolon
not encased in parentheses. Do this by importing the same flex lexer that
psql uses, since coping with stuff like dollar-quoted literals is hard to
get right without going the full nine yards.
This makes use of the infrastructure added in commit 0ea9efbe9e to
support independently-written flex lexers scanning the same PsqlScanState
input-buffer data structure. Since that infrastructure isn't very
friendly to ad-hoc parsing code such as strtok(), improve exprscan.l
so that it can parse either whitespace-separated words or expression
tokens, on demand, and rewrite pgbench.c's backslash-command parsing
code to always use the lexer to fetch tokens.
It's still the case that pgbench backslash commands extend to the end
of the line, no more and no less. That could be changed in a fairly
localized way now, and there was some interest in doing so, but it
seems like material for a separate patch.
In passing, make some marginal cleanups in syntax error reporting,
const-ify a few data structures that could use it, and run some of
this code through pgindent.
I can't tell whether the MSVC build scripts need to be taught explicitly
about the changes here or not, but the buildfarm will soon tell us.
Kyotaro Horiguchi and Tom Lane
Modern Perl has removed psed from its core distribution, so it might not
be readily available on some build platforms. We therefore replace its
use with a Perl script generated by s2p, which is equivalent to the sed
script. The latter is retained for non-MSVC builds to avoid creating a
new hard dependency on Perl for non-Windows tarball builds.
Backpatch to all live branches.
Michael Paquier and me.
This is a necessary preliminary step for making it play with psqlscan.l
given the way I set up the lexer input-buffer sharing mechanism in commit
0ea9efbe9e.
I've not tried to make it *actually* reentrant; there's still some static
variables laying about. But flex thinks it's reentrant, and that's what
counts.
In support of that, fix exprparse.y to pass through the yyscan_t from the
caller. Also do some minor code beautification, like not casting away
const.
Make some minor formatting adjustments to make it easier to diff these
files and see that they indeed implement the same flex rules (at least
to the extent that we want them to be the same).
(Someday it'd be nice to make ecpg's pgc.l more easily diff'able too,
but today is not that day.)
Also run relevant parts of these files and psqlscanslash.l through
pgindent.
No actual behavioral changes here, just obsessive neatnik-ism.
Now that we know about the %top{} trick, we can revert to building flex
lexers as separate .o files. This is worth doing for a couple of reasons
besides sheer cleanliness. We can narrow the scope of the -Wno-error flag
that's forced on scan.c. Also, since these grammar and lexer files are
so large, splitting them into separate build targets should have some
advantages in build speed, particularly in parallel or ccache'd builds.
We have quite a few other .l files that could be changed likewise, but the
above arguments don't apply to them, so the benefit of fixing them seems
pretty minimal. Leave the rest for some other day.
Previously, all scripts had the same probability of being chosen when
multiple of them were specified via -b, -f, -N, -S. With this commit,
-b and -f now search for an "@" in the script name and use the integer
found after it as the drawing probability for that script.
(One disadvantage is that if you have script whose names contain @, you
are now forced to specify "@1" at the end; otherwise the name's @ is
confused with a weight separator. We don't expect many pgbench script
with @ in their names in the wild, so this shouldn't be too serious a
problem.)
While at it, rework the interface between addScript, process_file,
process_builtin, and findBuiltin. It had gotten a bit out of hand with
recent commits.
Author: Fabien Coelho
Reviewed-By: Andres Freund, Robert Haas, Álvaro Herrera, Michaël Paquier
Discussion: http://www.postgresql.org/message-id/alpine.DEB.2.10.1603160721240.1666@sto
Buildfarm results show that the ability to attach pg_attribute_printf
decoration to a function pointer appeared somewhere between gcc 2.95.3
and gcc 4.0.1. Guess that it was there in 4.0.
We used to require the server key file to have permissions 0600 or less
for best security. But some systems (such as Debian) have certificate
and key files managed by the operating system that can be shared with
other services. In those cases, the "postgres" user is made a member of
a special group that has access to those files, and the server key file
has permissions 0640. To accommodate that kind of setup, also allow the
key file to have permissions 0640 but only if owned by root.
From: Christoph Berg <myon@debian.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
The existing infrastructure for FLEX_NO_BACKUP doesn't work reliably
when two lexers are built in parallel in the same directory. We can
probably fix that, but as a short-term workaround, just don't make
the check for psqlscanslash.l.
Per buildfarm.
This gets us to a point where psqlscan.l can be used by other frontend
programs for the same purpose psql uses it for, ie to detect when it's
collected a complete SQL command from input that is divided across
line boundaries. Moreover, other programs can supply their own lexers
for backslash commands of their own choosing. A follow-on patch will
use this in pgbench.
The end result here is roughly the same as in Kyotaro Horiguchi's
0001-Make-SQL-parser-part-of-psqlscan-independent-from-ps.patch, although
the details of the method for switching between lexers are quite different.
Basically, in this patch we share the entire PsqlScanState, YY_BUFFER_STATE
stack, *and* yyscan_t between different lexers. The only thing we need
to do to switch to a different lexer is to make sure the start_state is
valid for the new lexer. This works because flex doesn't keep any other
persistent state that depends on the specific lexing tables generated for
a particular .l file. (We are assuming that both lexers are built with
the same flex version, or at least versions that are compatible with
respect to the contents of yyscan_t; but that doesn't seem likely to
be a big problem in practice, considering how slowly flex changes.)
Aside from being more efficient than Horiguchi-san's original solution,
this avoids possible corner-case changes in semantics: the original code
was capable of popping the input buffer stack while still staying in
backslash-related parsing states. I'm not sure that that equates to any
useful user-visible behaviors, but I'm not sure it doesn't either, so
I'm loath to assume that we only need to consider the topmost buffer when
parsing a backslash command.
I've attempted to update the MSVC build scripts for the added .l file,
but will rely on the buildfarm to see if I missed anything.
Kyotaro Horiguchi and Tom Lane
Change psqlscan.l to specify '%option reentrant', adjust internal APIs
to match, and get rid of its internal static variables. While this is
good cleanup in an abstract sense, the reason to do it right now is that
it seems the only practical way to support use of separate flex lexers
with common PsqlScanState infrastructure. If we build two non-reentrant
lexers then we are going to have problems with dangling buffer pointers
in whichever lexer isn't active when we transition from one buffer to
another, as well as curious side-effects if we try to share any code
between the files. (Horiguchi-san had a different solution to that in his
pending patch, but I find it ugly and probably broken for corner cases.)
Depending on which version of flex you're using, this may result in getting
a "warning: unused variable 'yyg'" warning from psqlscan, similar to the
one you'd have seen for a long time in backend/parser/scan.l. I put a
local -Wno-error into CFLAGS for the file, for the convenience of those
who compile with -Werror.
Also, stop compiling psqlscan as part of mainloop.c, and make it a
standalone build target instead. This is a lot cleaner than before, though
it doesn't really change much in practice as of this commit. (I'm not sure
whether the MSVC build scripts will need some help with this part, but the
buildfarm will soon tell us.)
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
Remove assorted external references from psqlscan.l in preparation for
making it usable by other frontend programs. This mostly involves
getting rid of direct calls to psql_error() and GetVariable() in favor
of introducing a callback-functions struct to encapsulate variable
fetching and error printing. In addition, pass the current encoding
and standard-strings status as additional parameters to psql_scan_setup
instead of looking directly at "pset" or calling additional functions.
I did not bother to change some references to psql_error that are in
functions that will soon migrate to a psql-specific backslash-command
lexer. Other than that, this version of psqlscan.l is capable of
compiling standalone. It still depends on assorted src/common functions
as well as some encoding-related libpq functions, but we expect that
all programs using it will be happy with those dependencies.
Kyotaro Horiguchi, somewhat editorialized on by me
This avoids a good number of, individually quite fast, system calls in
scenarios with many quick queries. Besides the aesthetic benefit of
seing fewer superflous system calls with strace, it also improves
performance by ~2% measured by pgbench -M prepared -c 96 -j 8 -S (scale
100).
Without having benchmarked it, this patch also adjust the windows code,
as that makes it easier to unify the unix/windows codepaths in a later
patch. There's little reason to diverge in behaviour between the
platforms.
Discussion: CA+TgmoYc1Zm+Szoc_Qbzi92z2c1vRHZmjhfPn5uC=w8bXv6Avg@mail.gmail.com
Reviewed-By: Robert Haas
This allows for easier testing of the different primitives; in
preparation for adding a new primitive.
Discussion: 20160114143931.GG10941@awork2.anarazel.de
Reviewed-By: Robert Haas
postgres_fdw can now sent an UPDATE or DELETE statement directly to
the foreign server in simple cases, rather than sending a SELECT FOR
UPDATE statement and then updating or deleting rows one-by-one.
Etsuro Fujita, reviewed by Rushabh Lathia, Shigeru Hanada, Kyotaro
Horiguchi, Albe Laurenz, Thom Brown, and me.
Random .h files have no business including postgres-fe.h (or postgres.h).
If that wasn't the first #include done by the calling .c file, it's the
.c file that's broken. Noted while prepping Kyotaro Horiguchi's psql
lexer refactoring patch.
This means that, for example, "SELECT expensive_func(a) FROM bigtab
WHERE something" can compute expensive_func(a) in the workers rather
than the leader if it happens to be parallel-safe, which figures to be
a big win in some practical cases.
Currently, we can only do this if the entire target list is
parallel-safe. If we worked harder, we might be able to evaluate
parallel-safe targets in the worker and any parallel-restricted
targets in the leader, but that would be more complicated, and there
aren't that many parallel-restricted functions that people are likely
to use in queries anyway. I think. So just do the simple thing for
the moment.
Robert Haas, Amit Kapila, and Tom Lane
I'm committing these changes separately so that it's clear what is
Peter's original work versus what I changed. This is a followup to
commit 0011c0091e, and these changes
are all by me.
Introduce a new memory context which stores tuple data, and reset it
at the end of each merge pass; this helps avoid memory fragmentation
and, consequently, overallocation. Also, for the final merge patch,
eliminate memory context chunk header overhead entirely by allocating
all of the memory used for buffering tuples during the merge in a
single chunk. Since this modestly increases the number of tuples we
can store, grow the memtuples array a bit so that we're less likely to
run short of slots there.
Peter Geoghegan. Review and testing of patches in this series by
Jeff Janes, Greg Stark, Mithun Cy, and me.
In HEAD, fix incorrect field width for hours part of OF when tm_gmtoff is
negative. This was introduced by commit 2d87eedc1d as a result of
falsely applying a pattern that's correct when + signs are omitted, which
is not the case for OF.
In 9.4, fix missing abs() call that allowed a sign to be attached to the
minutes part of OF. This was fixed in 9.5 by 9b43d73b3f, but for
inscrutable reasons not back-patched.
In all three versions, ensure that the sign of tm_gmtoff is correctly
reported even when the GMT offset is less than 1 hour.
Add regression tests, which evidently we desperately need here.
Thomas Munro and Tom Lane, per report from David Fetter
- allow to use non-ascii characters as affix flag. Non-numeric affix flags now
are stored as string instead of numeric value of character.
- allow to use 0 as affix flag in numeric encoded affixes
That adds support for arabian, hungarian, turkish and
brazilian portuguese languages.
Author: Artur Zakirov with heavy editorization by me
This didn't work because when we dropped and re-established a database
connection, we did not bother to reset session-specific state such as
the statements-are-prepared flags.
The st->prepared[] array certainly needs to be flushed, and I cleared a
couple of other fields as well that couldn't possibly retain meaningful
state for a new connection.
In passing, fix some bogus comments and strange field order choices.
Per report from Robins Tharakan.
Somebody had apparently once figured that casting to unsigned int would
produce the right output for negative inputs, but that would only be
true if 2^32 were a multiple of 7, which of course it ain't. We need
to use a signed division and then correct the sign of the remainder.
AFAICT, the only case where this would arise currently is when doing
ISO-week calculations for dates in 4714BC, where we'd compute a
negative Julian date representing 4714-01-04BC and then do some
arithmetic with it. Since we don't even really document support for
such dates, this is not of much consequence. But we may as well
get it right.
Per report from Vitaly Burovoy.
Tighten the semantics of boundary-case timestamptz so that we allow
timestamps >= '4714-11-24 00:00+00 BC' and < 'ENDYEAR-01-01 00:00+00 AD'
exactly, no more and no less, but it is allowed to enter timestamps
within that range using non-GMT timezone offsets (which could make the
nominal date 4714-11-23 BC or ENDYEAR-01-01 AD). This eliminates
dump/reload failure conditions for timestamps near the endpoints.
To do this, separate checking of the inputs for date2j() from the
final range check, and allow the Julian date code to handle a range
slightly wider than the nominal range of the datatypes.
Also add a bunch of checks to detect out-of-range dates and timestamps
that formerly could be returned by operations such as date-plus-integer.
All C-level functions that return date, timestamp, or timestamptz should
now be proof against returning a value that doesn't pass IS_VALID_DATE()
or IS_VALID_TIMESTAMP().
Vitaly Burovoy, reviewed by Anastasia Lubennikova, and substantially
whacked around by me
Vinayak Pokale provided a patch for a copy-and-paste error in a
comment. I noticed that I'd use the word "automatically" nearby where
I meant to talk about things being "atomic". Rahila Syed spotted a
misplaced counter update. Fix all that stuff.
INSERT ... ON CONFLICT's precheck may have to wait on the outcome of
another insertion, which may or may not itself be a speculative
insertion. This wait is not necessarily associated with an exclusion
constraint, but was always reported that way in log messages if the wait
happened to involve a tuple that had no speculative token.
Initially discovered through use of ON CONFLICT DO NOTHING, where
spurious references to exclusion constraints in log messages were more
likely.
Patch by Peter Geoghegan.
Reviewed by Julien Rouhaud.
Back-patch to 9.5 where INSERT ... ON CONFLICT was added.
There's a lot more that could be done here yet - in particular, this
reports only very coarse-grained information about the index vacuuming
phase - but even as it stands, the new pg_stat_progress_vacuum can
tell you quite a bit about what a long-running vacuum is actually
doing.
Amit Langote and Robert Haas, based on earlier work by Vinayak Pokale
and Rahila Syed.
Previously, we included <xlocale.h> only if necessary to get the definition
of type locale_t. According to notes in PGAC_TYPE_LOCALE_T, this is
important because on some versions of glibc that file supplies an
incompatible declaration of locale_t. (This info may be obsolete, because
on my RHEL6 box that seems to be the *only* definition of locale_t; but
there may still be glibc's in the wild for which it's a live concern.)
It turns out though that on FreeBSD and maybe other BSDen, you can get
locale_t from stdlib.h or locale.h but mbstowcs_l() and friends only from
<xlocale.h>. This was leaving us compiling calls to mbstowcs_l() and
friends with no visible prototype, which causes a warning and could
possibly cause actual trouble, since it's not declared to return int.
Hence, adjust the configure checks so that we'll include <xlocale.h>
either if it's necessary to get type locale_t or if it's necessary to
get a declaration of mbstowcs_l().
Report and patch by Aleksander Alekseev, somewhat whacked around by me.
Back-patch to all supported branches, since we have been using
mbstowcs_l() since 9.1.
This is basically like the just-added create_upper_paths_hook, but
control is funneled only to the FDW responsible for all the baserels
of the current query; so providing such a callback is much less likely
to add useless overhead than using the hook function is.
The documentation is a bit sketchy. We'll likely want to improve it,
and/or adjust the call conventions, when we get some experience with
actually using this callback. Hopefully somebody will find time to
experiment with it before 9.6 feature freeze.
We don't support any parallel write operations at present, so choosing
a parallel plan causes us to error out. Also, add a new regression
test that uses EXPLAIN ANALYZE SELECT INTO; if we'd had this previously,
force_parallel_mode testing would have caught this issue.
Mithun Cy and Robert Haas
In the initial revision of the upper-planner pathification work, the only
available way for an FDW or custom-scan provider to inject Paths
representing post-scan-join processing was to insert them during scan-level
GetForeignPaths or similar processing. While that's not impossible, it'd
require quite a lot of duplicative processing to look forward and see if
the extension would be capable of implementing the whole query. To improve
matters for custom-scan providers, provide a hook function at the point
where the core code is about to start filling in upperrel Paths. At this
point Paths are available for the whole scan/join tree, which should reduce
the amount of redundant effort considerably.
(An alternative design that was suggested was to provide a separate hook
for each post-scan-join processing step, but that seems messy and not
clearly more useful.)
Following our time-honored tradition, there's no documentation for this
hook outside the source code.
As-is, this hook is only meant for custom scan providers, which we can't
assume very much about. A followon patch will implement an FDW callback
to let FDWs do the same thing in a somewhat more structured fashion.
Although the default choice of rel->reltarget should typically be
sufficient for scan or join paths, it's not at all sufficient for the
purposes PathTargets were invented for; in particular not for
upper-relation Paths. So break API compatibility by adding a PathTarget
argument to create_foreignscan_path(). To ease updating of existing
code, accept a NULL value of the argument as selecting rel->reltarget.
In commit 19a541143a I did not make PathTarget a subtype of Node,
and embedded a RelOptInfo's reltarget directly into it rather than having
a separately-allocated Node. In hindsight that was misguided
micro-optimization, enabled by the fact that at that point we didn't have
any Paths with custom PathTargets. Now that PathTarget processing has
been fleshed out some more, it's easier to see that it's better to have
PathTarget as an indepedent Node type, even if it does cost us one more
palloc to create a RelOptInfo. So change it while we still can.
This commit just changes the representation, without doing anything more
interesting than that.
Perl's integers are pointer-sized, so can hold more than INT_MAX on LP64
platforms, and come in both signed (IV) and unsigned (UV). Floating
point values (NV) may also be larger than double.
Since Perl 5.19.4 array indices are SSize_t instead of I32, so allow up
to SSize_t_max on those versions. The limit is not imposed just by
av_extend's argument type, but all the array handling code, so remove
the speculative comment.
Dagfinn Ilmari Mannsåker
Commit 23a27b039d widened the rows-stored counters to uint64, but
that's academic unless we allow the tuple pointer array to exceed 1GB.
(It might be a good idea to provide some other limit on how much storage
a SPITupleTable can eat. On the other hand, there are plenty of other
ways to drive a backend into swap hell.)
Dagfinn Ilmari Mannsåker
The old code is bad for two reasons. First, it has an off-by-one
error. Second, it won't help if you aren't running with assertions
enabled. Per discussion, we want a check here in that case too.
Author: KaiGai Kohei, adjusted by me.
Reviewed-by: Petr Jelinek
Discussion: 56E0D547.1030101@2ndquadrant.com
Commit d88976cfa1 removed this code from ginFreeScanKeys():
- if (entry->list)
- pfree(entry->list);
evidently in the belief that that ItemPointer array is allocated in the
keyCtx and so would be reclaimed by the following MemoryContextReset.
Unfortunately, it isn't and it won't. It'd likely be a good idea for
that to become so, but as a simple and back-patchable fix in the
meantime, restore this code to ginFreeScanKeys().
Also, add a similar pfree to where startScanEntry() is about to zero out
entry->list. I am not sure if there are any code paths where this
change prevents a leak today, but it seems like cheap future-proofing.
In passing, make the initial allocation of so->entries[] use palloc
not palloc0. The code doesn't depend on unused entries being zero;
if it did, the array-enlargement code in ginFillScanEntry() would be
wrong. So using palloc0 initially can only serve to confuse readers
about what the invariant is.
Per report from Felipe de Jesús Molina Bravo, via Jaime Casanova in
<CAJGNTeMR1ndMU2Thpr8GPDUfiHTV7idELJRFusA5UXUGY1y-eA@mail.gmail.com>
This longstanding functionality evidently got lost in commit
3d6d1b5855. Noted while studying an OOM report from Jaime
Casanova. Backpatch to 9.5 where the bug was introduced.
Commit a2dabf0e1d had the bright idea that it could modify a "const"
global variable if it merely casted away const from a pointer. This does
not work on platforms where the compiler puts "const" variables into
read-only storage. Depressingly, we evidently have no such platforms in
our buildfarm ... an oversight I have now remedied. (The one platform
that is known to catch this is recent OS X with -fno-common.)
Per report from Chris Ruprecht. Back-patch to 9.5 where the bogus
code was introduced.
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
Buildfarm members gaur and pademelon are old enough not to know about
MAP_FAILED; which is used in 428b1d6. Include portability/mem.h to fix;
as already done in a bunch of other places.
CitusDB is using these and don't wish to redesign their code right now.
I am not on board with this being a good idea, or a good precedent,
but I lack the energy to fight about it.
Commit a892234f83 added a second bit per
page to the visibility map, but pg_upgrade has been unaware of it up
until now. Therefore, a pg_upgrade from an earlier major release of
PostgreSQL to any commit preceding this one and following the one
mentioned above would result in invalid visibility map contents on the
new cluster, very possibly leading to data corruption. This plugs
that hole.
Masahiko Sawada, reviewed by Jeff Janes, Bruce Momjian, Simon Riggs,
Michael Paquier, Andres Freund, me, and others.
It is frequently useful for volatile, set-returning, or expensive functions
in a SELECT's targetlist to be postponed till after ORDER BY and LIMIT are
done. Otherwise, the functions might be executed for every row of the
table despite the presence of LIMIT, and/or be executed in an unexpected
order. For example, in
SELECT x, nextval('seq') FROM tab ORDER BY x LIMIT 10;
it's probably desirable that the nextval() values are ordered the same
as x, and that nextval() is not run more than 10 times.
In the past, Postgres was inconsistent in this area: you would get the
desirable behavior if the ordering were performed via an indexscan, but
not if it had to be done by an explicit sort step. Getting the desired
behavior reliably required contortions like
SELECT x, nextval('seq')
FROM (SELECT x FROM tab ORDER BY x) ss LIMIT 10;
This patch conditionally postpones evaluation of pure-output target
expressions (that is, those that are not used as DISTINCT, ORDER BY, or
GROUP BY columns) so that they effectively occur after sorting, even if an
explicit sort step is necessary. Volatile expressions and set-returning
expressions are always postponed, so as to provide consistent semantics.
Expensive expressions (costing more than 10 times typical operator cost,
which by default would include any user-defined function) are postponed
if there is a LIMIT or if there are expressions that must be postponed.
We could be more aggressive and postpone any nontrivial expression, but
there are costs associated with doing so: it requires an extra Result plan
node which adds some overhead, and postponement changes the volume of data
going through the sort step, perhaps for the worse. Since we tend not to
have very good estimates of the output width of nontrivial expressions,
it's hard to have much confidence in our ability to predict whether
postponement would increase or decrease the cost of the sort; therefore
this patch doesn't attempt to make decisions conditionally on that.
Between these factors and a general desire not to change query behavior
when there's not a demonstrable benefit, it seems best to be conservative
about applying postponement. We might tweak the decision rules in the
future, though.
Konstantin Knizhnik, heavily rewritten by me
Some dictionaries have duplicated base words with different affix set, we
just merge that sets into one set. But previously merging of sets of affixes
was actually a concatenation of strings but it's wrong for numeric
representation of affixes because such representation uses comma to
separate affixes.
Author: Artur Zakirov
Adds several tsvector editting function: convert tsvector to/from text array,
set weight for given lexemes, delete lexeme(s), unnest, filter lexemes
with given weights
Author: Stas Kelvich with some editorization by me
Reviewers: Tomas Vondram, Teodor Sigaev
Teach make_group_input_target() and make_window_input_target() to work
entirely with the PathTarget representation of tlists, rather than
constructing a tlist and immediately deconstructing it into PathTarget
format. In itself this only saves a few palloc's; the bigger picture is
that it opens the door for sharing cost_qual_eval work across all of
planner.c's constructions of PathTargets. I'll come back to that later.
In support of this, flesh out tlist.c's infrastructure for PathTargets
a bit more.
Much cruft had accumulated over time with a large number of parameters
passed down between functions very deep. With this refactoring, instead
introduce a StreamCtl structure that holds the parameters, and pass around
a pointer to this structure instead. This makes it much easier to add or
remove fields that are needed deeper down in the implementation without
having to modify every function header in the file.
Patch by me after much nagging from Andres
Reviewed by Craig Ringer and Daniel Gustafsson
emit_log_hook could only see the translated text, making it harder to identify
which message was being sent. Pass original text to allow the exact message to
be identified, whichever language is used for logging.
Discussion: 20160216.184755.59721141.horiguchi.kyotaro@lab.ntt.co.jp
Author: Kyotaro Horiguchi
The old code is wrong, because it returns a pointer to an automatic
variable. And it's also more clever than we really need to be
considering that the case it's worrying about should never happen.
Up to now checkpoints were written in the order they're in the
BufferDescriptors. That's nearly random in a lot of cases, which
performs badly on rotating media, but even on SSDs it causes slowdowns.
To avoid that, sort checkpoints before writing them out. We currently
sort by tablespace, relfilenode, fork and block number.
One of the major reasons that previously wasn't done, was fear of
imbalance between tablespaces. To address that balance writes between
tablespaces.
The other prime concern was that the relatively large allocation to sort
the buffers in might fail, preventing checkpoints from happening. Thus
pre-allocate the required memory in shared memory, at server startup.
This particularly makes it more efficient to have checkpoint flushing
enabled, because that'll often result in a lot of writes that can be
coalesced into one flush.
Discussion: alpine.DEB.2.10.1506011320000.28433@sto
Author: Fabien Coelho and Andres Freund
Currently writes to the main data files of postgres all go through the
OS page cache. This means that some operating systems can end up
collecting a large number of dirty buffers in their respective page
caches. When these dirty buffers are flushed to storage rapidly, be it
because of fsync(), timeouts, or dirty ratios, latency for other reads
and writes can increase massively. This is the primary reason for
regular massive stalls observed in real world scenarios and artificial
benchmarks; on rotating disks stalls on the order of hundreds of seconds
have been observed.
On linux it is possible to control this by reducing the global dirty
limits significantly, reducing the above problem. But global
configuration is rather problematic because it'll affect other
applications; also PostgreSQL itself doesn't always generally want this
behavior, e.g. for temporary files it's undesirable.
Several operating systems allow some control over the kernel page
cache. Linux has sync_file_range(2), several posix systems have msync(2)
and posix_fadvise(2). sync_file_range(2) is preferable because it
requires no special setup, whereas msync() requires the to-be-flushed
range to be mmap'ed. For the purpose of flushing dirty data
posix_fadvise(2) is the worst alternative, as flushing dirty data is
just a side-effect of POSIX_FADV_DONTNEED, which also removes the pages
from the page cache. Thus the feature is enabled by default only on
linux, but can be enabled on all systems that have any of the above
APIs.
While desirable and likely possible this patch does not contain an
implementation for windows.
With the infrastructure added, writes made via checkpointer, bgwriter
and normal user backends can be flushed after a configurable number of
writes. Each of these sources of writes controlled by a separate GUC,
checkpointer_flush_after, bgwriter_flush_after and backend_flush_after
respectively; they're separate because the number of flushes that are
good are separate, and because the performance considerations of
controlled flushing for each of these are different.
A later patch will add checkpoint sorting - after that flushes from the
ckeckpoint will almost always be desirable. Bgwriter flushes are most of
the time going to be random, which are slow on lots of storage hardware.
Flushing in backends works well if the storage and bgwriter can keep up,
but if not it can have negative consequences. This patch is likely to
have negative performance consequences without checkpoint sorting, but
unfortunately so has sorting without flush control.
Discussion: alpine.DEB.2.10.1506011320000.28433@sto
Author: Fabien Coelho and Andres Freund
All along, this function should have treated WindowFuncs in a manner
similar to Aggrefs, ie with an option whether or not to recurse into them.
By not considering the case, it was always recursing, which is OK for most
callers (although I suspect that the case in prepare_sort_from_pathkeys
might represent a bug). But now we need return-without-recursing behavior
as well. There are also more than a few callers that should never see a
WindowFunc, and now we'll get some error checking on that.
Commit a892234f83 gave us enough
infrastructure to avoid vacuuming pages where every tuple on the
page is already frozen. So, replace the notion of a scan_all or
whole-table vacuum with the less onerous notion of an "aggressive"
vacuum, which will pages that are all-visible, but still skip those
that are all-frozen.
This should greatly reduce the cost of anti-wraparound vacuuming
on large clusters where the majority of data is never touched
between one cycle and the next, because we'll no longer have to
read all of those pages only to find out that we don't need to
do anything with them.
Patch by me, reviewed by Masahiko Sawada.
In commit 1d97c19a0f and later c1d9579dd8, we extended
pull_var_clause's API by adding enum-type arguments. That's sort of a pain
to maintain, though, because it means every time we add a new behavior we
must touch every last one of the call sites, even if there's a reasonable
default behavior that most of them could use. Let's switch over to using a
bitmask of flags, instead; that seems more maintainable and might save a
nanosecond or two as well. This commit changes no behavior in itself,
though I'm going to follow it up with one that does add a new behavior.
In passing, remove flatten_tlist(), which has not been used since 9.1
and would otherwise need the same API changes.
Removing these enums means that optimizer/tlist.h no longer needs to
depend on optimizer/var.h. Changing that caused a number of C files to
need addition of #include "optimizer/var.h" (probably we can thank old
runs of pgrminclude for that); but on balance it seems like a good change
anyway.
Earlier version committed in 9.0 caused spurious waits in some cases.
New infrastructure for lock waits in 9.3 used to correct and improve this.
Jeff Janes based upon a proposal by Simon Riggs, who also reviewed
Additional review comments from Amit Kapila
When a process is waiting for a heavyweight lock, we will now indicate
the type of heavyweight lock for which it is waiting. Also, you can
now see when a process is waiting for a lightweight lock - in which
case we will indicate the individual lock name or the tranche, as
appropriate - or for a buffer pin.
Amit Kapila, Ildus Kurbangaliev, reviewed by me. Lots of helpful
discussion and suggestions by many others, including Alexander
Korotkov, Vladimir Borodin, and many others.
The Visual Studio 2013 CRT generates invalid code when it makes a 64-bit
build that is later used on a CPU that supports AVX2 instructions using a
version of Windows before 7SP1/2008R2SP1.
Detect this combination, and in those cases turn off the generation of
FMA3, per recommendation from the Visual Studio team.
The bug is actually in the CRT shipping with Visual Studio 2013, but
Microsoft have stated they're only fixing it in newer major versions.
The fix is therefor conditioned specifically on being built with this
version of Visual Studio, and not previous or later versions.
Author: Christian Ullrich
Previously 2PC header was fixed at 200 bytes, which in most cases wasted
WAL space for a workload using 2PC heavily.
Pavan Deolasee, reviewed by Petr Jelinek
There's no point in pstrdup'ing the result of TextDatumGetCString,
since that's necessarily already a freshly-palloc'd C string.
These particular calls are unlikely to be of any consequence
performance-wise, but still they're a bad precedent that can confuse
future patch authors.
Noted by Chapman Flack.
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes; especially on filesystems like xfs and ext4 when mounted
with data=writeback. To be certain that a rename() atomically replaces
the previous file contents in the face of crashes and different
filesystems, one has to fsync the old filename, rename the file, fsync
the new filename, fsync the containing directory. This sequence is not
generally adhered to currently; which exposes us to data loss risks. To
avoid having to repeat this arduous sequence, introduce
durable_rename(), which wraps all that.
Also add durable_link_or_rename(). Several places use link() (with a
fallback to rename()) to rename a file, trying to avoid replacing the
target file out of paranoia. Some of those rename sequences need to be
durable as well. There seems little reason extend several copies of the
same logic, so centralize the link() callers.
This commit does not yet make use of the new functions; they're used in
a followup commit.
Author: Michael Paquier, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
These simple methods rely on RecursiveCopy to create a filesystem-level
backup of a server. They aren't currently used anywhere yet,but will be
useful for future tests.
Author: Craig Ringer
Reviewed-By: Michael Paquier, Salvador Fandino, Álvaro Herrera
Commitfest-URL: https://commitfest.postgresql.org/9/569/
This allows skipping copying certain files and subdirectories in tests.
This is useful in some circumstances such as copying a data directory;
future tests want this feature.
Also POD-ify the module.
Authors: Craig Ringer, Pallavi Sontakke
Reviewed-By: Álvaro Herrera
An index search using a row comparison such as ROW(a, b) > ROW('x', 'y')
would stop upon reaching a NULL entry in the "b" column, ignoring the
fact that there might be non-NULL "b" values associated with later values
of "a". This happens because _bt_mark_scankey_required() marks the
subsidiary scankey for "b" as required, which is just wrong: it's for
a column after the one with the first inequality key (namely "a"), and
thus can't be considered a required match.
This bit of brain fade dates back to the very beginnings of our support
for indexed ROW() comparisons, in 2006. Kind of astonishing that no one
came across it before Glen Takahashi, in bug #14010.
Back-patch to all supported versions.
Note: the given test case doesn't actually fail in unpatched 9.1, evidently
because the fix for bug #6278 (i.e., stopping at nulls in either scan
direction) is required to make it fail. I'm sure I could devise a case
that fails in 9.1 as well, perhaps with something involving making a cursor
back up; but it doesn't seem worth the trouble.
At low rates, this can lead to pgbench taking significantly longer to
terminate than the user might expect. Repair.
Fabien Coelho, reviewed by Aleksander Alekseev, Álvaro Herrera, and me.
Using this facility, any utility command can report the target relation
upon which it is operating, if there is one, and up to 10 64-bit
counters; the intent of this is that users should be able to figure out
what a utility command is doing without having to resort to ugly hacks
like attaching strace to a backend.
As a demonstration, this adds very crude reporting to lazy vacuum; we
just report the target relation and nothing else. A forthcoming patch
will make VACUUM report a bunch of additional data that will make this
much more interesting. But this gets the basic framework in place.
Vinayak Pokale, Rahila Syed, Amit Langote, Robert Haas, reviewed by
Kyotaro Horiguchi, Jim Nasby, Thom Brown, Masahiko Sawada, Fujii Masao,
and Masanori Oyama.
This function is written as though Gather doesn't project; but it does.
Even if it did not project, though, we must use build_path_tlist to ensure
that the output columns receive correct sortgroupref labeling.
Per report from Amit Kapila.
Refactor so that the internal APIs in planner.c deal in PathTargets not
targetlists, and establish a more regular structure for deriving the
targets needed for successive steps.
There is more that could be done here; calculating the eval costs of each
successive target independently is both inefficient and wrong in detail,
since we won't actually recompute values available from the input node's
tlist. But it's no worse than what happened before the pathification
rewrite. In any case this seems like a good starting point for considering
how to handle Konstantin Knizhnik's function-evaluation-postponement patch.
Python's allocator does some low-level tricks for efficiency;
unfortunately they trigger valgrind errors. Those tricks can be disabled
making instrumentation easier; but few people testing postgres will have
such a build of python. So add broad suppressions of the resulting
errors.
See also https://svn.python.org/projects/python/trunk/Misc/README.valgrind
This possibly will suppress valid errors, but without it it's basically
impossible to use valgrind with plpython code.
Author: Andres Freund
Backpatch: 9.4, where we started to maintain valgrind suppressions
Instead of having planner.c compute a groupColIdx array and store it in
GroupingSetsPaths, make create_groupingsets_plan() find the grouping
columns by searching in the child plan node's tlist. Although that's
probably a bit slower for create_groupingsets_plan(), it's more like
the way every other plan node type does this, and it provides positive
confirmation that we know which child output columns we're supposed to be
grouping on. (Indeed, looking at this now, I'm not at all sure that it
wasn't broken before, because create_groupingsets_plan() isn't demanding
an exact tlist match from its child node.) Also, this allows substantial
simplification in planner.c, because it no longer needs to compute the
groupColIdx array at all; no other cases were using it.
I'd intended to put off this refactoring until later (like 9.7), but
in view of the likely bug fix and the need to rationalize planner.c's
tlist handling so we can do something sane with Konstantin Knizhnik's
function-evaluation-postponement patch, I think it can't wait.
Struct QL_HELP used to be defined as static in the sql_help.h header
file, which is included in sql_help.c and help.c, thus creating two
separate instances of the struct. This causes a warning from GCC 6,
because the struct is not used in sql_help.c.
Instead, declare the struct as extern in the header file and define it
in sql_help.c. This also allows making a bunch of functions static
because they are no longer needed outside of sql_help.c.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
I passed the wrong "root" struct to create_pathtarget in build_minmax_path.
Since the subroot is a clone of the outer root, this would not cause any
serious problems, but it would waste some cycles because
set_pathtarget_cost_width would not have access to Var width estimates
set up while running query_planner on the subroot.
plperl_ref_from_pg_array() didn't consider the case that postgrs arrays
can have 0 dimensions (when they're empty) and accessed the first
dimension without a check. Fix that by special casing the empty array
case.
Author: Alex Hunsaker
Reported-By: Andres Freund / valgrind / buildfarm animal skink
Discussion: 20160308063240.usnzg6bsbjrne667@alap3.anarazel.de
Backpatch: 9.1-
This patch removes some redundant cost calculations that I left for later
cleanup in commit 3fc6e2d7f5. There's now a uniform policy that the
make_foo() convenience functions don't do any cost calculations. Most of
their callers copy costs from the source Path node, and for those that
don't, the calculation in the make_foo() function wasn't necessarily right
anyhow. (make_result() was particularly a mess, as it was serving multiple
callers using cost calcs designed for only the first one or two that had
ever existed.) Aside from saving a few cycles, this ensures that what
EXPLAIN prints matches the costs we used for planning purposes. It does
not change any planner decisions, since the decisions are already made.
Without this fix, it inevitably bombs out with "ERROR: failed to
initialize transaction_read_only to 0". Repair.
Ashutosh Sharma; comments adjusted by me.
For example, if you want to perform an ioctl() on a file descriptor
opened through the fd.c routines, there's no way to do that without
being able to get at the underlying fd.
KaiGai Kohei
Commit a892234f83 added a second bit per
page to the visibility map, which still seems like a good idea, but it
also added a second page-level bit alongside PD_ALL_VISIBLE to track
whether the visibility map bit was set. That no longer seems like a
clever plan, because we don't really need that bit for anything. We
always clear both bits when the page is modified anyway.
Patch by me, reviewed by Kyotaro Horiguchi and Masahiko Sawada.
We've not found a use for this so far, and the current need, which
is to convert the visibility map to a new format, does not suit the
existing design anyway. So just rip it out.
Author: Masahiko Sawada, slightly revised by me.
Discussion: 20160215211313.GB31273@momjian.us
As originally committed, get_controlfile() used a non-standard approach
to error logging. Make it consistent with the majority of error logging
done in src/common.
Applies to master only.
Coverity and inspection for the issue addressed in fd45d16f found some
questionable code.
Specifically coverity noticed that the wrong length was added in
ReorderBufferSerializeChange() - without immediate negative consequences
as the variable isn't used afterwards. During code-review and testing I
noticed that a bit of space was wasted when allocating tuple bufs in
several places. Thirdly, the debug memset()s in
ReorderBufferGetTupleBuf() reduce the error checking valgrind can do.
Backpatch: 9.4, like c8f621c43.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
A thinko in a96761391 caused pg_ctl to get it exactly backwards when
deciding whether to report problems to the Windows eventlog or to stderr.
Per bug #14001 from Manuel Mathar, who also identified the fix.
Like the previous patch, back-patch to all supported branches.
As written, this would accept e.g. 123e9 as a function name. Aside
from being mildly astonishing, that would come back to haunt us if
we ever try to add float constants to the expression syntax. Insist
that function names start with letters (or at least non-digits).
In passing reset yyline as well as yycol when starting a new expression.
This variable is useless since it's used nowhere, but if we're going
to have it we should have it act sanely.
In c8f621c43 I forgot to account for MAXALIGN when allocating a new
tuplebuf in ReorderBufferGetTupleBuf(). That happens to currently not
cause active problems on a number of platforms because the affected
pointer is already aligned, but others, like ppc and hppa, trigger this
in the regression test, due to a debug memset clearing memory.
Fix that.
Backpatch: 9.4, like the previous commit.
There were two places in spell.c that supposed that they could search
for a location in a string produced by lowerstr() and then transpose
the offset into the original string. But this fails completely if
lowerstr() transforms any characters into characters of different byte
length, as can happen in Turkish UTF8 for instance.
We'd added some comments about this coding in commit 51e78ab4ff,
but failed to realize that it was not merely confusing but wrong.
Coverity complained about this code years ago, but in such an opaque
fashion that nobody understood what it was on about. I'm not entirely
sure that this issue *is* what it's on about, actually, but perhaps
this patch will shut it up -- and in any case the problem is clear.
Back-patch to all supported branches.
isdigit(), isspace(), etc are likely to give surprising results if passed a
signed char. We should always cast the argument to unsigned char to avoid
that. Error in commit d78a7d9c7f, found by buildfarm member gaur.
When decoding the old version of an UPDATE or DELETE change, and if that
tuple was bigger than MaxHeapTupleSize, we either Assert'ed out, or
failed in more subtle ways in non-assert builds. Normally individual
tuples aren't bigger than MaxHeapTupleSize, with big datums toasted.
But that's not the case for the old version of a tuple for logical
decoding; the replica identity is logged as one piece. With the default
replica identity btree limits that to small tuples, but that's not the
case for FULL.
Change the tuple buffer infrastructure to separate allocate over-large
tuples, instead of always going through the slab cache.
This unfortunately requires changing the ReorderBufferTupleBuf
definition, we need to store the allocated size someplace. To avoid
requiring output plugins to recompile, don't store HeapTupleHeaderData
directly after HeapTupleData, but point to it via t_data; that leaves
rooms for the allocated size. As there's no reason for an output plugin
to look at ReorderBufferTupleBuf->t_data.header, remove the field. It
was just a minor convenience having it directly accessible.
Reported-By: Adam Dratwiński
Discussion: CAKg6ypLd7773AOX4DiOGRwQk1TVOQKhNwjYiVjJnpq8Wo+i62Q@mail.gmail.com
Somehow I managed to flip the order of restoring old & new tuples when
de-spooling a change in a large transaction from disk. This happens to
only take effect when a change is spooled to disk which has old/new
versions of the tuple. That only is the case for UPDATEs where he
primary key changed or where replica identity is changed to FULL.
The tests didn't catch this because either spooled updates, or updates
that changed primary keys, were tested; not both at the same time.
Found while adding tests for the following commit.
Backpatch: 9.4, where logical decoding was added
Logical decoding's reorderbuffer keeps transactions in an LSN ordered
list for efficiency. To make that's efficiently possible upper-level
xids are forced to be logged before nested subtransaction xids. That
only works though if these records are all looked at: Unfortunately we
didn't do so for e.g. row level locks, which are otherwise uninteresting
for logical decoding.
This could lead to errors like:
"ERROR: subxact logged without previous toplevel record".
It's not sufficient to just look at row locking records, the xid could
appear first due to a lot of other types of records (which will trigger
the transaction to be marked logged with MarkCurrentTransactionIdLoggedIfAny).
So invent infrastructure to tell reorderbuffer about xids seen, when
they'd otherwise not pass through reorderbuffer.c.
Reported-By: Jarred Ward
Bug: #13844
Discussion: 20160105033249.1087.66040@wrigleys.postgresql.org
Backpatch: 9.4, where logical decoding was added
Add four new SQL accessible functions: pg_control_system(),
pg_control_checkpoint(), pg_control_recovery(), and pg_control_init()
which expose a subset of the control file data.
Along the way move the code to read and validate the control file to
src/common, where it can be shared by the new backend functions
and the original pg_controldata frontend program.
Patch by me, significant input, testing, and review by Michael Paquier.
Previously recovery_min_apply_delay was applied even before recovery
had reached consistency. This could cause us to wait a long time
unexpectedly for read-only connections to be allowed. It's problematic
because the standby was useless during that wait time.
This patch changes recovery_min_apply_delay so that it's applied once
the database has reached the consistent state. That is, even if the delay
is set, the standby tries to replay WAL records as fast as possible until
it has reached consistency.
Author: Michael Paquier
Reviewed-By: Julien Rouhaud
Reported-By: Greg Clough
Backpatch: 9.4, where recovery_min_apply_delay was added
Bug: #13770
Discussion: http://www.postgresql.org/message-id/20151111155006.2644.84564@wrigleys.postgresql.org
Historically, the wait_for_stats() function in this test has simply checked
for a report of an indexscan on tenk2, corresponding to the last command
issued before we expect stats updates to appear. However, with parallel
query that indexscan could be done by a parallel worker that will emit
its stats counters to the collector before the session's main backend does
(a full second before, in fact, thanks to the "pg_sleep(1.0)" added by
commit 957d08c81f). That leaves a sizable window in which an
autovacuum-triggered write of the stats files would present a state in
which the indexscan on tenk2 appears to have been done, but none of the
write updates performed by the test have been. This is evidently the
explanation for intermittent failures seen by me and on buildfarm member
mandrill.
To fix, we should check separately for both the tenk2 seqscan and indexscan
counts, since those might be reported by different processes that could be
delayed arbitrarily on an overloaded test machine. And we need to check
for at least one update-related count. If we ever allow parallel workers
to do writes, this will get even more complicated ... but in view of all
the other hard problems that will entail, I don't feel a need to solve this
one today.
Per research by Rahila Syed and myself; part of this patch is Rahila's.
A simple SELECT is handled by PortalRunSelect, not ProcessQuery. Also,
the previous indentation was unclear: change it so that a deeper level
of indentation indicates that the outer function calls the inner one.
Stas Kelvich
Originally, we didn't have nworkers_launched, so code that used parallel
contexts had to be preprared for the possibility that not all of the
workers requested actually got launched. But now we can count on knowing
the number of workers that were successfully launched, which can shave
off a few cycles and simplify some code slightly.
Amit Kapila, reviewed by Haribabu Kommi, per a suggestion from Peter
Geoghegan.
Now it's possible to load recent version of Hunspell for several languages.
To handle these dictionaries Hunspell patch adds support for:
* FLAG long - sets the double extended ASCII character flag type
* FLAG num - sets the decimal number flag type (from 1 to 65535)
* AF parameter - alias for flag's set
Also it moves test dictionaries into separate directory.
Author: Artur Zakirov with editorization by me
The existing code confuses the byte length of the string (which is
relevant when passing it to pg_strncasecmp) with the character length
of the string (which is relevant when it is used with the SQL substring
function). Separate those two concepts.
Report and patch by Kyotaro Horiguchi, reviewed by Thomas Munro and
reviewed and further revised by me.
This makes the flag more visible for testers using the default file as a
template, increasing the likelyhood that the test suite will be run.
Also have the flag be displayed in the fake "configure" output, if set.
This patch is two new lines only, but perltidy decides to shift things
around which makes it appear a bit bigger.
Author: Michaël Paquier
Reviewed-by: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAB7nPqRet6UAP2APhZAZw%3DVhJ6w-Q-gGLdZkrOqFgd2vc9-ZDw%40mail.gmail.com
This makes the psql() method much more capable: it captures both stdout
and stderr; it now returns the psql exit code rather than stdout; a
timeout can now be specified, as can ON_ERROR_STOP behavior; it gained a
new "on_error_die" (defaulting to off) parameter to raise an exception
if there's any problem. Finally, additional parameters to psql can be
passed if there's need for further tweaking.
For convenience, a new safe_psql() method retains much of the old
behavior of psql(), except that it uses on_error_die on, so that
problems like syntax errors in SQL commands can be detected more easily.
Many existing TAP test files now use safe_psql, which is what is really
wanted. A couple of ->psql() calls are now added in the commit_ts
tests, which verify that the right thing is happening on certain errors.
Some ->command_fails() calls in recovery tests that were verifying that
psql failed also became ->psql() calls now.
Author: Craig Ringer. Some tweaks by Álvaro Herrera
Reviewed-By: Michaël Paquier
Also, mention in README that Perl files should be perltidy'ed. This
isn't really the best place (since we have Perl files elsewhere in the
tree) and this is already in pgindent's README, but this subdir is
likely to get hacked a whole lot more than the other Perl files, so it
seems okay to spend two lines on this.
Author: Craig Ringer
One test was relying on method remove_tree that isn't implemented in the
oldest Perl we support; fix it by using the older rmtree instead.
Another test had a typo in a SQL command, which isn't noticed because
the PostgresNode->psql() method doesn't check that queries return
correctly. That's undesirable and will also be fixed later on, but for
now let's make the test actually work.
Author: Craig Ringer
606c0123d6 attempted to reduce cost of index scans using > and <
strategies, though got that completely wrong in a few complex cases.
Revert whole patch until we find a safe optimization.
When adding replication origins in 5aa235042, I somehow managed to set
the timestamp of decoded transactions to InvalidXLogRecptr when decoding
one made without a replication origin. Fix that, and the wrong type of
the new commit_time variable.
This didn't trigger a regression test failure because we explicitly
don't show commit timestamps in the regression tests, as they obviously
are variable. Add a test that checks that a decoded commit's timestamp
is within minutes of NOW() from before the commit.
Reported-By: Weiping Qu
Diagnosed-By: Artur Zakirov
Discussion: 56D4197E.9050706@informatik.uni-kl.de,
56D42918.1010108@postgrespro.ru
Backpatch: 9.5, where 5aa235042 originates.
A thinko concerning nesting depth caused json_to_record() to produce bogus
output if a field of its input object contained a sub-object with a field
name matching one of the requested output column names. Per bug #13996
from Johann Visagie.
I added a regression test case based on his example, plus parallel tests
for json_to_recordset, jsonb_to_record, jsonb_to_recordset. The latter
three do not exhibit the same bug (which suggests that we may be missing
some opportunities to share code...) but testing seems like a good idea
in any case.
Back-patch to 9.4 where these functions were introduced.
Commits 9ff60273e3 and dbe2328959 adjusted the declarations
of some core functions referenced by contrib/tsearch2's install script,
forgetting that in a pg_upgrade situation, we'll be trying to restore
operator class definitions that reference the old signatures. We've
hit this problem before; solve it in the same way as before, namely by
installing stub functions that have the expected signature and just
invoke the correct function. Per report from Jeff Janes.
(Someday we ought to stop supporting contrib/tsearch2, but I'm not
sure today is that day.)
This makes it easier to relate the temporary data dirs to each node in
a test script.
Author: Kyotaro Horiguchi
Reviewed-By: Craig Ringer, Alvaro Herrera
PL/Tcl appears to contain logic to convert strings between the database
encoding and UTF8, which is the only encoding modern Tcl will deal with.
However, that code has been disabled since commit 034895125d, which
made it "#if defined(UNICODE_CONVERSION)" and neglected to provide any way
for that symbol to become defined. That might have been all right back
in 2001, but these days we take a dim view of allowing strings with
incorrect encoding into the database.
Remove the conditional compilation, fix warnings about signed/unsigned char
conversions, clean up assorted places that didn't bother with conversions.
(Notably, there were lots of assumptions that database table and field
names didn't need conversion...)
Add a regression test based on plpython_unicode. It's not terribly
thorough, but better than no test at all.
As of commit 2878220682, PL/Tcl will not
compile against pre-8.0 Tcl, whereas it used to work (more or less anyway)
with quite prehistoric versions. As long as we're moving these goalposts,
let's reinstall them at someplace that has some thought behind it. This
commit sets the minimum allowed Tcl version at 8.4, and rips out some bits
of compatibility cruft that are in consequence no longer needed. Reasons
for requiring 8.4 include:
* 8.4 was released in 2002; there seems little reason to believe that
anyone would want to use older versions with Postgres 9.6+.
* We have no buildfarm members testing anything older than 8.4, and
thus no way to know if it's broken.
* We need at least 8.1 to allow enforcement of database encoding
security (8.1 standardized Tcl on using UTF8 internally, before that
it was pretty unpredictable).
* Some versions between 8.1 and 8.4 allowed the backend to become
multithreaded, which is disastrous. We need at least 8.4 to be able
to disable the Tcl notifier subsystem to prevent that.
A small side benefit is that we can make the code more readable by
doing s/CONST84/const/g.
The original implementation of Tcl was all strings, but they improved
performance significantly by introducing typed "objects" (integers,
lists, code, etc). It's past time we made use of that; that happened
in Tcl 8.0 which was released in 1997.
This patch also modernizes some of the error-reporting code, which may
cause small changes in the spelling of complaints about bad calls to
PL/Tcl-provided commands.
Jim Nasby and Karl Lehenbauer, reviewed by Victor Wagner
Commit 7132810c (Retain tempdirs for failed tests) used Test::More's
is_passing method, but that was added in Test::More 0.89_01 which is
sometime later than Perl 5.10.1. Popular platforms such as RHEL6 don't
have that, nevermind some of our older dinosaurs. Do it the hard way.
Michael Paquier, based on research by Craig Ringer
The new bit indicates whether every tuple on the page is already frozen.
It is cleared only when the all-visible bit is cleared, and it can be
set only when we vacuum a page and find that every tuple on that page is
both visible to every transaction and in no need of any future
vacuuming.
A future commit will use this new bit to optimize away full-table scans
that would otherwise be triggered by XID wraparound considerations. A
page which is merely all-visible must still be scanned in that case, but
a page which is all-frozen need not be. This commit does not attempt
that optimization, although that optimization is the goal here. It
seems better to get the basic infrastructure in place first.
Per discussion, it's very desirable for pg_upgrade to automatically
migrate existing VM forks from the old format to the new format. That,
too, will be handled in a follow-on patch.
Masahiko Sawada, reviewed by Kyotaro Horiguchi, Fujii Masao, Amit
Kapila, Simon Riggs, Andres Freund, and others, and substantially
revised by me.
Test composite-type arguments and the argisnull and spi_lastoid Tcl
commmands. This stuff was not covered before, but needs to be exercised
since the upcoming Tcl object-conversion patch changes these code paths
(and broke at least one of them).
These tests verify that 1) WAL replay preserves the stored value,
2) a streaming standby server replays the value obtained from the
master, and 3) the behavior is sensible in the face of repeated
configuration changes.
One annoyance is that tmp_check/ subdir from the TAP tests is clobbered
when the pg_regress test runs in the same subdirectory. This is
bothersome but not too terrible a problem, since the pg_regress test is
not run anyway if the TAP tests fail (unless "make -k" is used).
I had these tests around since commit 69e7235c93e2; add them now that we
have the recovery test framework in place.
Fabien Coelho, reviewed mostly by Michael Paquier and me, but also by
Heikki Linnakangas, BeomYong Lee, Kyotaro Horiguchi, Oleksander
Shulgin, and Álvaro Herrera.
I noticed that the async-notify test results in log messages like these:
LOG: could not send data to client: Broken pipe
FATAL: connection to client lost
This is because it unceremoniously disconnects a client session that is
about to have some NOTIFY messages delivered to it. Such log messages
during a regression test might well cause people to go looking for a
problem that doesn't really exist (it did cause me to waste some time that
way). We can shut it up by adding an UNLISTEN command to session teardown.
Patch HEAD only; this doesn't seem significant enough to back-patch.
This error message was written with only ON SELECT rules in mind, but since
then we also made RETURNING-clause targetlists go through the same logic.
This means that you got a rather off-topic error message if you tried to
add a rule with RETURNING to a table having dropped columns. Ideally we'd
just support that, but some preliminary investigation says that it might be
a significant amount of work. Seeing that Nicklas Avén's complaint is the
first one we've gotten about this in the ten years or so that the code's
been like that, I'm unwilling to put much time into it. Instead, improve
the error report by issuing a different message for RETURNING cases, and
revise the associated comment based on this investigation.
Discussion: 1456176604.17219.9.camel@jordogskog.no
The original coding of the test was relying too much on the ordering in
which backends are awakened once an advisory lock which they wait for is
released. Change the code so that each backend uses its own advisory
lock instead, so that the output becomes stable. Also add a few seconds
of sleep between lock releases, so that the test isn't broken in
overloaded buildfarm animals, as suggested by Tom Lane.
Per buildfarm members spoonbill and guaibasaurus.
Discussion: https://www.postgresql.org/message-id/19294.1456551587%40sss.pgh.pa.us
It's harmless, but might confuse readers. Seems to have been introduced
in 6bc8ef0b7f. Back-patch, just to avoid cosmetic cross-branch
differences.
Amit Langote
In commit 19a541143a I replaced RelOptInfo.width with
RelOptInfo.reltarget.width, but I missed updating debug_print_rel()
for that because it's not compiled by default.
Reported by Salvador Fandino, patch by Michael Paquier.
When converting an RTE with securityQuals into a security barrier
subquery RTE, ensure that the Vars in the new subquery's targetlist
all have varlevelsup = 0 so that they correctly refer to the
underlying base relation being wrapped.
The original code was creating new Vars by copying them from existing
Vars referencing the base relation found elsewhere in the query, but
failed to account for the fact that such Vars could come from sublink
subqueries, and hence have varlevelsup > 0. In practice it looks like
this could only happen with nested security barrier views, where the
outer view has a WHERE clause containing a correlated subquery, due to
the order in which the Vars are processed.
Bug: #13988
Reported-by: Adam Guthrie
Backpatch-to: 9.4, where updatable SB views were introduced
A failure partway through PGLC_localeconv() led to a situation where
the next call would call free_struct_lconv() a second time, leading
to free() on already-freed strings, typically leading to a core dump.
Add a flag to remember whether we need to do that.
Per report from Thom Brown. His example case only provokes the failure
as far back as 9.4, but nonetheless this code is obviously broken, so
back-patch to all supported branches.
In 0e5680f473, I fixed a bug in heapam that caused spurious deadlocks
when multiple updates concurrently attempted to modify the old version
of an updated tuple whose new version was key-share locked. I proposed
an isolationtester spec file that reproduced the bug, but back then
isolationtester wasn't mature enough to be able to run it. Now that
38f8bdcac4 is in the tree, we can have this spec file too.
Discussion: https://www.postgresql.org/message-id/20141212205254.GC1768%40alvh.no-ip.org
I applied the previous-to-last revision of Michaël's submitted patch
instead of the last; these two tweaks pointed out by Craig were left out
of the previous commit by accident.
Some code in the RewindTest test suite is more generally useful than
just for that suite, so put it where other test suites can reach it.
Some postgresql.conf parameters change their default values when a
cluster is initialized with 'allows_streaming' than the previous
behavior; most notably, autovacuum is no longer turned off.
(Also, we no longer call pg_ctl promote with -w, but that flag doesn't
actually do anything in promote so there's no behavior change.)
Author: Michael Paquier
CREATE TABLE .. AS EXECUTE can turn an apparently read-only query into
a write operation, which parallel query can't handle. It's a bit of a
shame that requires us to avoid parallel query for queries prepared via
PREPARE in all cases, but for right now it does.
This is basically a bug fix; the old code assumes that a ForeignScan
is always parallel-safe, but for postgres_fdw, for example, this is
definitely false. It should be true for file_fdw, though, since a
worker can read a file from the filesystem just as well as any other
backend process.
Original patch by Thomas Munro. Documentation, and changes to the
comments, by me.
Also, the dump_info method got split into another method that returns
the stuff as a string instead of just printing it to stdout.
Add a new README in src/test/perl too.
Author: Craig Ringer
Reviewed by: Michaël Paquier
Parallel query can't handle running a query only partially rather than
to completion. However, there seems to be no way to run a statement
prepared via SQL PREPARE other than to completion, so we can enable it
there without a problem.
The situation is more complicated for the extend query protocol.
libpq seems to provide no way to send an Execute message with a
non-zero rowcount, but some other client might. If that happens, and
a parallel plan was chosen, we'll execute the parallel plan without
using any workers, which may be somewhat inefficient but should still
work. Hopefully this won't be a problem; users can always set
max_parallel_degree=0 to avoid choosing parallel plans in the first
place.
Amit Kapila, reviewed by me.
This patch introduces "pg_blocking_pids(int) returns int[]", which returns
the PIDs of any sessions that are blocking the session with the given PID.
Historically people have obtained such information using a self-join on
the pg_locks view, but it's unreasonably tedious to do it that way with any
modicum of correctness, and the addition of parallel queries has pretty
much broken that approach altogether. (Given some more columns in the view
than there are today, you could imagine handling parallel-query cases with
a 4-way join; but ugh.)
The new function has the following behaviors that are painful or impossible
to get right via pg_locks:
1. Correctly understands which lock modes block which other ones.
2. In soft-block situations (two processes both waiting for conflicting lock
modes), only the one that's in front in the wait queue is reported to
block the other.
3. In parallel-query cases, reports all sessions blocking any member of
the given PID's lock group, and reports a session by naming its leader
process's PID, which will be the pg_backend_pid() value visible to
clients.
The motivation for doing this right now is mostly to fix the isolation
tests. Commit 38f8bdcac4 lobotomized
isolationtester's is-it-waiting query by removing its ability to recognize
nonconflicting lock modes, as a crude workaround for the inability to
handle soft-block situations properly. But even without the lock mode
tests, the old query was excessively slow, particularly in
CLOBBER_CACHE_ALWAYS builds; some of our buildfarm animals fail the new
deadlock-hard test because the deadlock timeout elapses before they can
probe the waiting status of all eight sessions. Replacing the pg_locks
self-join with use of pg_blocking_pids() is not only much more correct, but
a lot faster: I measure it at about 9X faster in a typical dev build with
Asserts, and 3X faster in CLOBBER_CACHE_ALWAYS builds. That should provide
enough headroom for the slower CLOBBER_CACHE_ALWAYS animals to pass the
test, without having to lengthen deadlock_timeout yet more and thus slow
down the test for everyone else.
We don't really need this field, because it's either zero or redundant with
PGPROC.pid. The use of zero to mark "not a group leader" is not necessary
since we can just as well test whether lockGroupLeader is NULL. This does
not save very much, either as to code or data, but the simplification seems
worthwhile anyway.
In 4b4b680c3 I accidentally used sizeof(PrivateRefCountArray) instead of
sizeof(PrivateRefCountEntry) when creating the refcount overflow
hashtable. As the former is bigger than the latter, this luckily only
resulted in a slightly increased memory usage when many buffers are
pinned in a backend.
Reported-By: Takashi Horikawa
Discussion: 73FA3881462C614096F815F75628AFCD035A48C3@BPXM01GP.gisp.nec.co.jp
Backpatch: 9.5, where thew new ref count infrastructure was introduced
Coverity griped about use of unchecked strcpy() into a local variable.
There's unlikely to be any actual bug there, since no caller would be
passing a path longer than MAXPGPATH, but nonetheless use of strlcpy()
seems preferable.
While at it, get rid of unmaintainable separation between list of
field names and list of field values in favor of initializing them
in parallel. And we might as well declare get_configdata()'s path
argument as const char *, even though no current caller needs that.
Some over-eager copy-and-pasting on my part resulted in a nonsense
result being returned in this case. I have adopted the same pattern for
handling this case as is used in the one argument form of the function,
i.e. we just skip over the code that adds values to the object.
Diagnosis and patch from Michael Paquier, although not quite his
solution.
Fixes bug #13936.
Backpatch to 9.5 where jsonb_object was introduced.
Reflow text in lock manager README so that it fits within 80 columns.
Correct some mistakes. Expand the README to explain not only why group
locking exists but also the data structures that support it. Improve
comments related to group locking several files. Change the name of a
macro argument for improved clarity.
Most of these problems were reported by Tom Lane, but I found a few
of them myself.
Robert Haas and Tom Lane
Commit 53874c5228 broke various 32-bit
buildfarm machines because it incorrectly used an 'L' suffix for what
needed to be a 64-bit literal. Thanks to Michael Paquier for helping
to diagnose this.
This will parse strings in the format produced by pg_size_pretty() and
return sizes in bytes. This allows queries to be written with clauses
like "pg_total_relation_size(oid) > pg_size_bytes('10 GB')".
Author: Pavel Stehule with various improvements by Vitaly Burovoy
Discussion: http://www.postgresql.org/message-id/CAFj8pRD-tGoDKnxdYgECzA4On01_uRqPrwF-8LdkSE-6bDHp0w@mail.gmail.com
Reviewed-by: Vitaly Burovoy, Oleksandr Shulgin, Kyotaro Horiguchi,
Michael Paquier and Robert Haas
Architecture reference material specifies this order, and s_lock.h
inline assembly agrees. The former order failed to provide mutual
exclusion to lwlock.c and perhaps to other clients. The two xlc
buildfarm members, hornet and mandrill, have failed sixteen times with
duplicate key errors involving pg_class_oid_index or pg_type_oid_index.
Back-patch to 9.5, where commit b64d92f1a5
introduced atomics.
Reviewed by Andres Freund and Tom Lane.
StartupSUBTRANS() incorrectly handled cases near the max pageid in the subtrans
data structure, which in some cases could lead to errors in startup for Hot
Standby.
This patch wraps the pageids correctly, avoiding any such errors.
Identified by exhaustive crash testing by Jeff Janes.
Jeff Janes
It was using %u to read a string that was earlier produced by snprintf with %d
into a signed integer variable. This seems to work in practice but is
incorrect.
found by cppcheck
Up to now, there's been an assumption that all Paths for a given relation
compute the same output column set (targetlist). However, there are good
reasons to remove that assumption. For example, an indexscan on an
expression index might be able to return the value of an expensive function
"for free". While we have the ability to generate such a plan today in
simple cases, we don't have a way to model that it's cheaper than a plan
that computes the function from scratch, nor a way to create such a plan
in join cases (where the function computation would normally happen at
the topmost join node). Also, we need this so that we can have Paths
representing post-scan/join steps, where the targetlist may well change
from one step to the next. Therefore, invent a "struct PathTarget"
representing the columns we expect a plan step to emit. It's convenient
to include the output tuple width and tlist evaluation cost in this struct,
and there will likely be additional fields in future.
While Path nodes that actually do have custom outputs will need their own
PathTargets, it will still be true that most Paths for a given relation
will compute the same tlist. To reduce the overhead added by this patch,
keep a "default PathTarget" in RelOptInfo, and allow Paths that compute
that column set to just point to their parent RelOptInfo's reltarget.
(In the patch as committed, actually every Path is like that, since we
do not yet have any cases of custom PathTargets.)
I took this opportunity to provide some more-honest costing of
PlaceHolderVar evaluation. Up to now, the assumption that "scan/join
reltargetlists have cost zero" was applied not only to Vars, where it's
reasonable, but also PlaceHolderVars where it isn't. Now, we add the eval
cost of a PlaceHolderVar's expression to the first plan level where it can
be computed, by including it in the PathTarget cost field and adding that
to the cost estimates for Paths. This isn't perfect yet but it's much
better than before, and there is a way forward to improve it more. This
costing change affects the join order chosen for a couple of the regression
tests, changing expected row ordering.
Suppress creation of the pg_upgrade delete script when the new data
directory is inside the old data directory.
Reported-by: IRC
Backpatch-through: 9.3, where delete script tests were added
In commit a5c43b88 the behavior of command line pg_config was
inadvertantly changed to include the config name when specific
configs are requested, similar to when none are requested and
all are emitted. This breaks scripts that expect to use
pg_config for e.g. PGXS. Revert the behavior to the previous.
Move and refactor the underlying code for the pg_config client
application to src/common in support of sharing it with a new
system information SRF called pg_config() which makes the same
information available via SQL. Additionally wrap the SRF with a
new system view, as called pg_config.
Patch by me with extensive input and review by Michael Paquier
and additional review by Alvaro Herrera.
When processing ordered aggregates following a sort that could make use
of the abbreviated key optimization, only call the equality operator to
compare successive pairs of tuples when their abbreviated keys were not
equal.
Peter Geoghegan, reviewd by Andreas Karlsson and by me.
A function name that's double-quoted in SQL can contain almost any
characters, but we were using that name directly as part of the name
generated for the Python-level function, and Python doesn't like
anything that isn't pretty much a standard identifier. To fix,
replace anything that isn't an ASCII letter or digit with an underscore
in the generated name. This doesn't create any risk of duplicate Python
function names because we were already appending the function OID to
the generated name to ensure uniqueness. Per bug #13960 from Jim Nasby.
Patch by Jim Nasby, modified a bit by me. Back-patch to all
supported branches.
In commit 7b4bfc87 the DATA and DESCR entries for the new
row_security_active() function were inadvertantly put after
the PROVOLATILE defines, rather than before as they should
have been placed. Move them up where they belong.
Backpatch to 9.5 where the new entries were introduced.
Commit 4de82f7d7 increased the WAL flush rate, mainly to increase the
likelihood that hint bits can be set quickly. More quickly set hint bits
can reduce contention around the clog et al. But unfortunately the
increased flush rate can have a significant negative performance impact,
I have measured up to a factor of ~4. The reason for this slowdown is
that if there are independent writes to the underlying devices, for
example because shared buffers is a lot smaller than the hot data set,
or because a checkpoint is ongoing, the fdatasync() calls force cache
flushes to be emitted to the storage.
This is achieved by flushing WAL only if the last flush was longer than
wal_writer_delay ago, or if more than wal_writer_flush_after (new GUC)
unflushed blocks are pending. Based on some tests the default for
wal_writer_delay is 1MB, which seems to work well both on SSD and
rotational media.
To avoid negative performance impact due to 4de82f7d7 an earlier
commit (db76b1e) made SetHintBits() more likely to succeed; preventing
performance regressions in the pgbench tests I performed.
Discussion: 20160118163908.GW10941@awork2.anarazel.de
The original code wasn't careful to test the file descriptor returned by
PQsocket() for an invalid socket. If an invalid socket did turn up,
that would amount to calling FD_ISSET with fd = -1, whereby undefined
behavior can be invoked.
To fix, test file descriptor for validity and stop further processing if
that fails.
Problem noticed by Coverity.
There is an existing FD_ISSET callsite that does check for invalid
sockets beforehand, but the error message reported by it was
strerror(errno); in testing the aforementioned change, that turns out to
result in "bad socket: Success" which isn't terribly helpful. Instead
use PQerrorMessage() in both places which is more likely to contain an
useful error message.
Backpatch-through: 9.1.
Reportedly, some compilers warn about tests like "c < 0" if c is unsigned,
and hence complain about the character range checks I added in commit
3bb3f42f37. This is a bit of a pain since
the regex library doesn't really want to assume that chr is unsigned.
However, since any such reconfiguration would involve manual edits of
regcustom.h anyway, we can put it on the shoulders of whoever wants to
do that to adjust this new range-checking macro correctly.
Per gripes from Coverity and Andres.
Previously we only allowed SetHintBits() to succeed if the commit LSN of
the last transaction touching the page has already been flushed to
disk. We can't generally change the LSN of the page, because we don't
necessarily have the required locks on the page. But the required LSN
interlock does not mean the commit record has to be flushed immediately,
it just requires that the commit record will be flushed before the page is
written out. Therefore if the buffer LSN is newer than the commit LSN,
the hint bit can be safely set.
In a number of scenarios (e.g. pgbench) this noticeably increases the
number of hint bits are set. But more importantly it also keeps the
success rate up when flushing WAL less frequently. That was the original
reason for commit 4de82f7d7, which has negative performance consequences
in a number of scenarios. This will allow a followup commit to reduce
the flush rate.
Discussion: 20160118163908.GW10941@awork2.anarazel.de
In REFRESH MATERIALIZED VIEW command, CONCURRENTLY option is only
allowed if there is at least one unique index with no WHERE clause on
one or more columns of the matview. Previously, concurrent refresh
checked the existence of a unique index on the matview after filling
the data to new snapshot, i.e., after calling refresh_matview_datafill().
So, when there was no unique index, we could need to wait a long time
before we detected that and got the error. It was a waste of time.
To eliminate such wasting time, this commit changes concurrent refresh
so that it checks the existence of a unique index at the beginning of
the refresh operation, i.e., before starting any time-consuming jobs.
If CONCURRENTLY option is not allowed due to lack of a unique index,
concurrent refresh can immediately detect it and emit an error.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Fujii Masao
The API spec for this function was changed completely (and for the better)
by commit 3cba8999b3, but it didn't bother
with anything as mundane as updating the comments.
NextXID has been rendered in the form of a pg_lsn even though it
really is not. This can cause confusion, so change the format from
%u/%u to %u:%u, per discussion on hackers.
Complaint by me, patch by me and Bruce, reviewed by Michael Paquier
and Alvaro. Applied to HEAD only.
Author: Joe Conway, Bruce Momjian
Reviewed-by: Michael Paquier, Alvaro Herrera
Backpatch-through: master
The previous value of 5s is inadequate for the buildfarm's
CLOBBER_CACHE_ALWAYS animals: they take long enough to do the is-it-waiting
queries that the timeout expires, allowing the database state to change,
before isolationtester is done looking. Perhaps 10s will be enough.
(If it isn't, I'm inclined to reduce the number of sessions involved.)
This mostly reverts commit 9c9782f066.
I left in the parts that rearranged removal of completed waiting steps;
but the idea of not rechecking a step's blocked-ness isn't working.
There is no reason to have the per-thread logfile file pointer as a
separate parameter in various functions: it's much simpler to put it in
the per-thread state struct instead, which is already being passed to
all functions that need the log file anyway. Change the callsites in
which it was used as a boolean to test whether logging is active, so
that they use the use_log global variable instead.
No backpatch, even though this exists since commit a887c486d5 of March
2010, because this is just for cleanliness' sake and the surrounding
code has been modified a lot recently anyway.
It turns out that there is a second race condition in the new deadlock-hard
test: once the deadlock detector fires, it's uncertain whether step s7a8 or
step s8a1 will report first, because killing s8's transaction unblocks s7.
So far, s7 has only been seen to report first in CLOBBER_CACHE_ALWAYS
builds, but it's pretty reproducible there, and in theory it should
sometimes occur in normal builds too. If s7 were a bit slower than usual,
that could also break the test, since the existing expected-file assumes
that we'll see s7a8 report the first time we check it after s8a1 completes.
To fix, add a post-lock delay to s7a8.
If we're retrying a step, then we already decided it was blocked on a lock,
and there's no need to recheck that. The original coding of commit
38f8bdcac4 resulted in a large number of
is-it-waiting queries when dealing with multiple concurrently-blocked
sessions, which is fairly pointless and also results in test failures in
CLOBBER_CACHE_ALWAYS builds, where the is-it-waiting query is quite slow.
This definition also permits appending pg_sleep() calls to steps where it's
needed to control the order of finish of concurrent steps. Before, that
did not work nicely because we'd decide that a step performing a sleep was
not blocked and hang up waiting for it to finish, rather than noticing the
completion of the concurrent step we're supposed to notice first.
In passing, revise handling of removal of completed waiting steps
to make it a bit less messy.
An extensible node is always tagged T_Extensible, but the extnodename
field identifies it more specifically; it may also include arbitrary
private data. Extensible nodes can be copied, tested for equality,
serialized, and deserialized, but the core system doesn't know
anything about them otherwise. Some extensions may find it useful to
include these nodes in fdw_private or custom_private lists in lieu of
arm-wrestling their data into a format that the core code can
understand.
Along the way, so as not to burden the authors of such extensible
node types too much, expose the functions for writing serialized
tokens, and for serializing and deserializing bitmapsets.
KaiGai Kohei, per a design suggested by me. Reviewed by Andres Freund
and by me, and further edited by me.
The new deadlock-soft-2 test has a timing dependency too: it supposes
that isolationtester will detect step s1b as waiting before the deadlock
detector runs and grants it the lock. Adjust deadlock_timeout to ensure
that that's true even in CLOBBER_CACHE_ALWAYS builds, where the wait
detection query is quite slow. Per buildfarm member jaguarundi.
If we ever get around to allowing functional dependency to be proven
from other things besides simple primary keys, this code will need to
be rethought, but that was true anyway. In the meantime, we might as
well not have two very-similar routines for scanning pg_constraint.
David Rowley, reviewed by Julien Rouhaud
If a GROUP BY clause includes all columns of a non-deferred primary key,
as well as other columns of the same relation, those other columns are
redundant and can be dropped from the grouping; the pkey is enough to
ensure that each row of the table corresponds to a separate group.
Getting rid of the excess columns will reduce the cost of the sorting or
hashing needed to implement GROUP BY, and can indeed remove the need for
a sort step altogether.
This seems worth testing for since many query authors are not aware of
the GROUP-BY-primary-key exception to the rule about queries not being
allowed to reference non-grouped-by columns in their targetlists or
HAVING clauses. Thus, redundant GROUP BY items are not uncommon. Also,
we can make the test pretty cheap in most queries where it won't help
by not looking up a rel's primary key until we've found that at least
two of its columns are in GROUP BY.
David Rowley, reviewed by Julien Rouhaud
A pending patch requires exporting a function returning Bitmapset from
catalog/pg_constraint.c. As things stand, that would mean including
nodes/bitmapset.h in pg_constraint.h, which might be hazardous for the
client-side includability of that header. It's not entirely clear whether
any client-side code needs to include pg_constraint.h, but it seems prudent
to assume that there is some such code somewhere. Therefore, split off the
function definitions into a new file pg_constraint_fn.h, similarly to what
we've done for some other catalog header files.
Historically this message has been emitted at the end of ShutdownXLOG().
That's not an insane place for it in a standalone backend, but in the
postmaster environment we've grown a fair amount of stuff that happens
later, including archiver/walsender shutdown, stats collector shutdown,
etc. Recent buildfarm experimentation showed that on slower machines
there could be many seconds' delay between finishing ShutdownXLOG() and
actual postmaster exit. That's fairly confusing, both for testing
purposes and for DBAs. Hence, move the code that prints this message
into UnlinkLockFiles(), so that it comes out just after we remove the
postmaster's pidfile. That is a more appropriate definition of "is shut
down" from the point of view of "pg_ctl stop", for example. In general,
removing the pidfile should be the last externally-visible action of
either a postmaster or a standalone backend; compare commit
d73d14c271 for instance. So this seems
like a reasonably future-proof approach.
This finishes the work - spread across many commits over the last
several months - of putting each type of lock other than the named
individual locks into a separate tranche.
Amit Kapila
The original formulation of 4c9864b9b4
was extremely timing-sensitive, because it arranged for the deadlock
detector to be running (and possibly unblocking the current query)
at almost exactly the same time as isolationtester would be probing
to see if the query is blocked. The committed expected-file assumed
that the deadlock detection would finish first, but we see the opposite
on both fast and slow buildfarm animals. Adjust the deadlock timeout
settings to make it predictable that isolationtester *will* see the
query as waiting before deadlock detection unblocks it.
I used a 5s timeout for the same reasons mentioned in
a7921f71a3.
Fix a few oversights in 38f8bdcac4:
don't leak memory in run_permutation(), remember when we've issued
a cancel rather than issuing another one every 10ms,
fix some typos in comments.
Commit 0e141c0fbb introduced a new
facility to reduce ProcArrayLock contention by clearing several XIDs
from the ProcArray under a single lock acquisition. The names
initially chosen were deemed not to be very good choices, so commit
4aec49899e renamed them. But now it
seems like we still didn't get it right. A pending patch wants to
add similar infrastructure for batching CLOG updates, so the names
need to be clear enough to allow a new set of structure members with
a related purpose.
Amit Kapila
This allows testing of deadlock scenarios. Scenarios that would
previously have been considered invalid are now simply taken as a
scenario in which more than one backend will wait.
This is a necessary prerequisite for forthcoming changes to allow deadlock
scenarios to be tested by the isolation tester. It is also a good idea on
general principle, since these scenarios add no useful test coverage not
provided by other scenarios, but do to take time to execute.
Thirty seconds was not consistently enough for promotion to complete on
buildfarm members sungazer and tern. Experiments suggest 43s would have
been enough. Back-patch to 9.5, where pg_rewind was introduced.
Many automated test suites call pg_ctl. Buildfarm members axolotl,
hornet, mandrill, shearwater, sungazer and tern have failed when server
shutdown took longer than the pg_ctl default 60s timeout. This addition
permits slow hosts to easily raise the timeout without us editing a
--timeout argument into every test suite pg_ctl call. Back-patch to 9.1
(all supported versions) for the sake of automated testing.
Reviewed by Tom Lane.
It turns out that on FreeBSD-derived platforms (including OS X), the
*scanf() family of functions is pretty much brain-dead about multibyte
characters. In particular it will apply isspace() to individual bytes
of input even when those bytes are part of a multibyte character, thus
allowing false recognition of a field-terminating space.
We appear to have little alternative other than instituting a coding
rule that *scanf() is not to be used if the input string might contain
multibyte characters. (There was some discussion of relying on "%ls",
but that probably just moves the portability problem somewhere else,
and besides it doesn't fully prevent BSD *scanf() from using isspace().)
This patch is a down payment on that: it gets rid of use of sscanf()
to parse ispell dictionary files, which are certainly at great risk
of having a problem. The code is cleaner this way anyway, though
a bit longer.
In passing, improve a few comments.
Report and patch by Artur Zakirov, reviewed and somewhat tweaked by me.
Back-patch to all supported branches.
As of commit c1772ad922, there's no
longer any way of requesting additional LWLocks in the main tranche,
so we don't need NumLWLocks() or LWLockAssign() any more. Also,
some of the allocation counters that we had previously aren't needed
any more either.
Amit Kapila
Further investigation says that there may be some slow operations after
we've finished ShutdownXLOG(), so add some more log messages to try to
isolate that. This is all temporary code too.
Early returns from the buildfarm show that there's a bit of a gap in the
logging I added in 3971f64843: the portion of CreateCheckPoint()
after CheckPointGuts() can take a fair amount of time. Add a few more
log messages in that section of code. This too shall be reverted later.
This is a quick hack, due to be reverted when its purpose has been served,
to try to gather information about why some of the buildfarm critters
regularly fail with "postmaster does not shut down" complaints. Maybe they
are just really overloaded, but maybe something else is going on. Hence,
instrument pg_ctl to print the current time when it starts waiting for
postmaster shutdown and when it gives up, and add a lot of logging of the
current time in the server's checkpoint and shutdown code paths.
No attempt has been made to make this pretty. I'm not even totally sure
if it will build on Windows, but we'll soon find out.
Since pgindent treats typedef names as global, the original coding of
b47b4dbf68 would have had rather nasty effects on the formatting
of other files in which "string" is used as a variable or field name.
Use a less generic name for this typedef, and rename some other
identifiers to match.
Peter Geoghegan, per gripe from me
Previously, our regex code defined CHR_MAX as 0xfffffffe, which is a
bad choice because it is outside the range of type "celt" (int32).
Characters approaching that limit could lead to infinite loops in logic
such as "for (c = a; c <= b; c++)" where c is of type celt but the
range bounds are chr. Such loops will work safely only if CHR_MAX+1
is representable in celt, since c must advance to beyond b before the
loop will exit.
Fortunately, there seems no reason not to restrict CHR_MAX to 0x7ffffffe.
It's highly unlikely that Unicode will ever assign codes that high, and
none of our other backend encodings need characters beyond that either.
In addition to modifying the macro, we have to explicitly enforce character
range restrictions on the values of \u, \U, and \x escape sequences, else
the limit is trivially bypassed.
Also, the code for expanding case-independent character ranges in bracket
expressions had a potential integer overflow in its calculation of the
number of characters it could generate, which could lead to allocating too
small a character vector and then overwriting memory. An attacker with the
ability to supply arbitrary regex patterns could easily cause transient DOS
via server crashes, and the possibility for privilege escalation has not
been ruled out.
Quite aside from the integer-overflow problem, the range expansion code was
unnecessarily inefficient in that it always produced a result consisting of
individual characters, abandoning the knowledge that we had a range to
start with. If the input range is large, this requires excessive memory.
Change it so that the original range is reported as-is, and then we add on
any case-equivalent characters that are outside that range. With this
approach, we can bound the number of individual characters allowed without
sacrificing much. This patch allows at most 100000 individual characters,
which I believe to be more than the number of case pairs existing in
Unicode, so that the restriction will never be hit in practice.
It's still possible for range() to take awhile given a large character code
range, so also add statement-cancel detection to its loop. The downstream
function dovec() also lacked cancel detection, and could take a long time
given a large output from range().
Per fuzz testing by Greg Stark. Back-patch to all supported branches.
Security: CVE-2016-0773
Commit 7f46eaf added the regression test which checks that
gin_clean_pending_list() cleans up the GIN pending list and returns >0.
This usually works fine. But if autovacuum comes along and cleans
the list before gin_clean_pending_list() starts, the function may
return 0, and then the regression test may fail.
To fix the problem, this commit disables autovacuum on the target
index of gin_clean_pending_list() by setting autovacuum_enabled
reloption to off when creating the table.
Also this commit sets gin_pending_list_limit reloption to 4MB on
the target index. Otherwise when running "make installcheck" with
small gin_pending_list_limit GUC, insertions of data may trigger
the cleanup of pending list before gin_clean_pending_list() starts
and the function may return 0. This could cause the regression test
to fail.
Per buildfarm member spoonbill.
Reported-By: Tom Lane
In 61444bfb we started to allow HAVING clauses to be fully pushed down
into WHERE, even when grouping sets are in use. That turns out not to
work correctly, because grouping sets can "produce" NULLs, meaning that
filtering in WHERE and HAVING can have different results, even when no
aggregates or volatile functions are involved.
Instead only allow pushdown of empty grouping sets.
It'd be nice to do better, but the exact mechanics of deciding which
cases are safe are still being debated. It's important to give correct
results till we find a good solution, and such a solution might not be
appropriate for backpatching anyway.
Bug: #13863
Reported-By: 'wrb'
Diagnosed-By: Dean Rasheed
Author: Andrew Gierth
Reviewed-By: Dean Rasheed and Andres Freund
Discussion: 20160113183558.12989.56904@wrigleys.postgresql.org
Backpatch: 9.5, where grouping sets were introduced
The parser doesn't allow qualification of column names appearing in
these clauses, but ruleutils.c would sometimes qualify them, leading
to dump/reload failures. Per bug #13891 from Onder Kalaci.
(In passing, make stanzas in ruleutils.c that save/restore varprefix
more consistent.)
Peter Geoghegan
Commit 45f6240a8f added an assumption in ExecHashIncreaseNumBatches
and ExecHashIncreaseNumBuckets that they could find all tuples in the main
hash table by iterating over the "dense storage" introduced by that patch.
However, ExecHashRemoveNextSkewBucket continued its old practice of simply
re-linking deleted skew tuples into the main table's hashchains. Hence,
such tuples got lost during any subsequent increase in nbatch or nbuckets,
and would never get joined, as reported in bug #13908 from Seth P.
I (tgl) think that the aforesaid commit has got multiple design issues
and should be reworked rather completely; but there is no time for that
right now, so band-aid the problem by making ExecHashRemoveNextSkewBucket
physically copy deleted skew tuples into the "dense storage" arena.
The added test case is able to exhibit the problem by means of fooling the
planner with a WHERE condition that it will underestimate the selectivity
of, causing the initial nbatch estimate to be too small.
Tomas Vondra and Tom Lane. Thanks to David Johnston for initial
investigation into the bug report.
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
For locking purposes, we now regard heavyweight locks as mutually
non-conflicting between cooperating parallel processes. There are some
possible pitfalls to this approach that are not to be taken lightly,
but it works OK for now and can be changed later if we find a better
approach. Without this, it's very easy for parallel queries to
silently self-deadlock if the user backend holds strong relation locks.
Robert Haas, with help from Amit Kapila. Thanks to Noah Misch and
Andres Freund for extensive discussion of possible issues with this
approach.
It seems that sprintf(), at least in glibc's version, is unreasonably slow
compared to hand-rolled code for printing integers. Replacing most uses of
sprintf() in the datetime.c output functions with special-purpose code
turns out to give more than a 2X speedup in COPY of a table with a single
timestamp column; which is pretty impressive considering all the other
logic in that code path.
David Rowley and Andres Freund, reviewed by Peter Geoghegan and myself
Commit 30d7ae3c76 introduced an HJDEBUG
stanza that probably didn't compile at the time, and definitely doesn't
compile now, because it refers to a nonexistent variable. It doesn't seem
terribly useful anyway, so just get rid of it.
While I'm fooling with it, use %z modifier instead of the obsolete hack of
casting size_t to unsigned long, and include the HashJoinTable's address in
each printout so that it's possible to distinguish the activities of
multiple hashjoins occurring in one query.
Noted while trying to use HJDEBUG to investigate bug #13908. Back-patch
to 9.5, because code that doesn't compile is certainly not very helpful.
Future PL/Java versions will close CVE-2016-0766 by making these GUCs
PGC_SUSET. This PostgreSQL change independently mitigates that PL/Java
vulnerability, helping sites that update PostgreSQL more frequently than
PL/Java. Back-patch to 9.1 (all supported versions).
Commit a104a017fc has this check because
I added it to the submitted patch before commit, but that was entirely
wrongheaded, as explained to me by Ashutosh Bapat, who also wrote this
patch.
An example use-case is "CHECK(num_nonnulls(a,b,c) = 1)" to assert that
exactly one of a,b,c isn't NULL. The functions are variadic, so they
can also be pressed into service to count the number of null or nonnull
elements in an array.
Marko Tiikkaja, reviewed by Pavel Stehule
GetExistingLocalJoinPath() is useful for handling EvalPlanQual rechecks
properly, and GetUserMappingById() is needed to make sure you're using
the right credentials.
Shigeru Hanada, Etsuro Fujita, Ashutosh Bapat, Robert Haas
The previous RequestAddinLWLocks() method had several disadvantages.
First, the locks would be in the main tranche; we've recently decided
that it's useful for LWLocks used for separate purposes to have
separate tranche IDs. Second, there wasn't any correlation between
what code called RequestAddinLWLocks() and what code called
LWLockAssign(); when multiple modules are in use, it could become
quite difficult to troubleshoot problems where LWLockAssign() ran out
of locks. To fix, create a concept of named LWLock tranches which
can be used either by extension or by core code.
Amit Kapila and Robert Haas
If a view is split into CREATE TABLE + CREATE RULE to break a circular
dependency, then any triggers on the view must be dumped/reloaded after
the CREATE RULE; else the backend may reject the CREATE TRIGGER because
it's the wrong type of trigger for a plain table. This works all right
in plain dump/restore because of pg_dump's sorting heuristic that places
triggers after rules. However, when using parallel restore, the ordering
must be enforced by a dependency --- and we didn't have one.
Fixing this is a mere matter of adding an addObjectDependency() call,
except that we need to be able to find all the triggers belonging to the
view relation, and there was no easy way to do that. Add fields to
pg_dump's TableInfo struct to remember where the associated TriggerInfo
struct(s) are.
Per bug report from Dennis Kögel. The failure can be exhibited at least
as far back as 9.1, so back-patch to all supported branches.
Have varlena.c expose an interface that allows the char(n), bytea, and
bpchar types to piggyback on a now-generalized SortSupport for text.
This pushes a little more knowledge of the bpchar/char(n) type into
varlena.c than might be preferred, but that seems like the approach
that creates least friction. Also speed things up for index builds
that use text_pattern_ops or varchar_pattern_ops.
This patch does quite a bit of renaming, but it seems likely to be
worth it, so as to avoid future confusion about the fact that this code
is now more generally used than the old names might have suggested.
Peter Geoghegan, reviewed by Álvaro Herrera and Andreas Karlsson,
with small tweaks by me.
This patch doesn't put the new infrastructure to use anywhere, and
indeed it's not clear how it could ever be used for something like
postgres_fdw which has to send an SQL query and wait for a reply,
but there might be FDWs or custom scan providers that are CPU-bound,
so let's give them a way to join club parallel.
KaiGai Kohei, reviewed by me.
You can't really do anything useful with this in the form it currently
exists; among other problems, there's no way to reread whatever
information might be produced when the path is output. Work is
underway to replace this with a more useful and more general system of
extensible nodes, but let's start by getting rid of this bit.
Extracted from a larger patch by KaiGai Kohei.
Commit e09996ff8d was one brick shy of a load: it didn't insist
that the detected JSON number be the whole of the supplied string.
This allowed inputs such as "2016-01-01" to be misdetected as valid JSON
numbers. Per bug #13906 from Dmitry Ryabov.
In passing, be more wary of zero-length input (I'm not sure this can
happen given current callers, but better safe than sorry), and do some
minor cosmetic cleanup.
Insert sd_notify() calls at server start and stop for integration with
systemd. This allows the use of systemd service units of type "notify",
which greatly simplifies the systemd configuration.
Reviewed-by: Pavel Stěhule <pavel.stehule@gmail.com>
Previously, the first error seen would be that postgresql.conf does not
exist. But for the case where the whole directory does not exist, give
an error message about that, together with a hint for how to create one.
This field was included in the original definition of the printQueryOpt
struct in commit a45195a191, but it was not used anywhere in that
commit, nor since then. Spotted by Dickson S. Guedes.
create_foreignscan_plan needs to know whether any system columns are
requested from a relation (this flag is needed by ForeignNext during
execution). However, for join relations this is a pointless test,
because it's not possible to request system columns from them, so
remove the check.
Author: Etsuro Fujita
Discussion: http://www.postgresql.org/message-id/56AA0FC5.9000207@lab.ntt.co.jp
Reviewed-by: David Rowley, Robert Haas
Apparently at least one committer hasn't gotten the word that these do not
need to be maintained by hand, since initdb will create them automatically.
Noted while fixing bug #13905.
No catversion bump since the post-initdb state is exactly the same either
way. I don't see a need for back-patch, either.
All the other jsonb function descriptions refer to the arguments as being
"jsonb", but these two said "json". Make it consistent. Per bug #13905
from Petru Florin Mihancea.
No catversion bump --- we can't force one in the back branches, and this
isn't very critical anyway.
KNN GiST with recheck flag should return to executor the same type as ordering
operator, GiST detects this type by looking to return type of function which
implements ordering operator. But occasionally detecting code works after
replacing ordering operator function to distance support function.
Distance support function always returns float8, so, detecting code get float8
instead of actual return type of ordering operator.
Built-in opclasses don't have ordering operator which doesn't return
non-float8 value, so, tests are impossible here, at least now.
Backpatch to 9.5 where lozzy KNN was introduced.
Author: Alexander Korotkov
Report by: Artur Zakirov
Provide per-script statistical info (count of transactions executed
under that script, average latency for the whole script) after a
multi-script run, adding an intermediate level of detail to existing
global stats and per-command stats.
Author: Fabien Coelho
Reviewer: Michaël Paquier, Álvaro Herrera
Dividing INT_MIN by -1 or taking INT_MIN modulo -1 can sometimes
cause floating-point exceptions or otherwise misbehave.
Fabien Coelho and Michael Paquier
Add
- ALTER SYSTEM SET/RESET ... -> GUC variables
- ALTER TABLE ... SET WITH -> OIDS
- ALTER DATABASE/FUNCTION/ROLE/USER ... SET/RESET -> GUC variables
- ALTER DATABASE/FUNCTION/ROLE/USER ... SET ... -> FROM CURRENT/TO
- ALTER DATABASE/FUNCTION/ROLE/USER ... SET ... TO/= -> possible values
Author: Fujii Masao
Reviewed-by: Michael Paquier, Masahiko Sawada
This is following in a long train of similar changes and for the same
reasons - see b319356f0e and
fe702a7b3f inter alia.
Author: Amit Kapila
Reviewed-by: Alexander Korotkov, Robert Haas
Previously, each PGPROC's backendLock was part of the main tranche,
and the PGPROC just contained a pointer. Now, the actual LWLock is
part of the PGPROC.
As with previous, similar patches, this makes it significantly easier
to identify these lwlocks in LWLOCK_STATS or Trace_lwlocks output
and improves modularity.
Author: Ildus Kurbangaliev
Reviewed-by: Amit Kapila, Robert Haas
This doesn't add any functionality but just shuffles things around so
that it can be reused and improved later.
Author: Fabien Coelho
Reviewed-by: Michael Paquier, Álvaro Herrera
listForeignTables' invocation of processSQLNamePattern did not match up
with the other ones that handle potentially-schema-qualified names; it
failed to make use of pg_table_is_visible() and also passed the name
arguments in the wrong order. Bug seems to have been aboriginal in commit
0d692a0dc9. It accidentally sort of worked as long as you didn't
inquire too closely into the behavior, although the silliness was later
exposed by inconsistencies in the test queries added by 59efda3e50
(which I probably should have questioned at the time, but didn't).
Per bug #13899 from Reece Hart. Patch by Reece Hart and Tom Lane.
Back-patch to all affected branches.
Previously, the foreign join pushdown infrastructure left the question
of security entirely up to individual FDWs, but it would be easy for
a foreign data wrapper to inadvertently open up subtle security holes
that way. So, make it the core code's job to determine which user
mapping OID is relevant, and don't attempt join pushdown unless it's
the same for all relevant relations.
Per a suggestion from Tom Lane. Shigeru Hanada and Ashutosh Bapat,
reviewed by Etsuro Fujita and KaiGai Kohei, with some further
changes by me.
Previously, postgres_fdw's connection cache was keyed by user OID and
server OID, but this can lead to multiple connections when it's not
really necessary. In particular, if all relevant users are mapped to
the public user mapping, then their connection options are certainly
the same, so one connection can be used for all of them.
While we're cleaning things up here, drop the "server" argument to
GetConnection(), which isn't really needed. This saves a few cycles
because callers no longer have to look this up; the function itself
does, but only when establishing a new connection, not when reusing
an existing one.
Ashutosh Bapat, with a few small changes by me.
This function cleans up the pending list of the GIN index by
moving entries in it to the main GIN data structure in bulk.
It returns the number of pages cleaned up from the pending list.
This function is useful, for example, when the pending list
needs to be cleaned up *quickly* to improve the performance of
the search using GIN index. VACUUM can do the same thing, too,
but it may take days to run on a large table.
Jeff Janes,
reviewed by Julien Rouhaud, Jaime Casanova, Alvaro Herrera and me.
Discussion: CAMkU=1x8zFkpfnozXyt40zmR3Ub_kHu58LtRmwHUKRgQss7=iQ@mail.gmail.com
pg_size_pretty function should be marked immutable rather than volatile
because it always returns the same result given the same argument.
Pavel Stehule
Previously, it was possible to specify one or several custom scripts to
run, or only one of the builtin scripts. With this patch it is also
possible to specify to run the builtin scripts multiple times, using the
new -b option. Also, unify the code for both cases; this eases future
pgbench improvements.
Author: Fabien Coelho
Review: Michaël Paquier, Álvaro Herrera
pgindent for recent commits; also change some variables from int to
boolean, which is how they are really used.
Mostly submitted by Fabien Coelho; this is in preparation to commit
further patches to the file.
We entirely randomly chose to initialize port->remote_host just after
printing the log_connections message, when we could perfectly well do it
just before, allowing %h and %r to work for that message. Per gripe from
Artem Tomyuk.
The original coding was quite fast so long as objects were always
released in reverse order of addition; otherwise, it degenerated into
O(N^2) behavior due to searching for the array element to delete.
Improve matters by switching to hashed storage when the number of
objects of a given type exceeds 64. (The cutover point is open to
discussion, of course, but some simple performance testing suggests
that hashing has enough overhead to be a loser below there.)
Also, refactor resowner.c so that we don't need N copies of the array
management code. Since all the resource IDs the code currently needs
to deal with are either pointers or integers, it seems sufficient to
create a one-size-fits-all infrastructure in which everything is
converted to a Datum for storage.
Aleksander Alekseev, reviewed by Stas Kelvich, further fixes by me
Buildfarm member cockatiel is still saying that cosd(60) isn't 0.5.
What seems likely is that the subexpression (1.0 - cos(x)) isn't being
rounded to double width before more arithmetic is done on it, so force
that by storing it into a variable.
The last round didn't do it. Per Noah Misch, the problem on at least
some machines is that the compiler pre-evaluates trig functions having
constant arguments using code slightly different from what will be used
at runtime. Therefore, we must prevent the compiler from seeing constant
arguments to any of the libm trig functions used in this code.
The method used here might still fail if init_degree_constants() gets
inlined into the call sites. That probably won't happen given the large
number of call sites; but if it does, we could probably fix it by making
init_degree_constants() non-static. I'll avoid that till proven
necessary, though.
The buildfarm isn't very happy with the results of commit e1bd684a34.
To try to get the expected exact results everywhere:
* Replace M_PI / 180 subexpressions with a precomputed constant, so that
the compiler can't decide to rearrange that division with an adjacent
operation. Hopefully this will fix failures to get exactly 0.5 from
sind(30) and cosd(60).
* Add scaling to ensure that tand(45) and cotd(45) give exactly 1; there
was nothing particularly guaranteeing that before.
* Replace minus zero by zero when tand() or cotd() would output that;
many machines did so for tand(180) and cotd(270), but not all. We could
alternatively deem both results valid, but that doesn't seem likely to
be what users will want.
Add
- ALTER FOREIGN DATA WRAPPER -> RENAME TO
- ALTER SERVER -> RENAME TO
- ALTER SERVER ... VERSION ... -> OPTIONS
- CREATE FOREIGN DATA WRAPPER -> OPTIONS
- CREATE SERVER -> OPTIONS
- CREATE|ALTER USER MAPPING -> OPTIONS
From: Andreas Karlsson <andreas@proxel.se>
The original code was adding double quotes to an already-quoted
identifier, leading to nonsensical results. Remove the quoting call.
I introduced the broken code in 7eca575d1c of 9.5 era, so backpatch to
9.5.
Report and patch by Elvis Pranskevichus
Reviewed by Michael Paquier
The implementations go to some lengths to deliver exact results for values
where an exact result can be expected, such as sind(30) = 0.5 exactly.
Dean Rasheed, reviewed by Michael Paquier
Ensure that the trig functions return NaN for NaN input regardless of what
the underlying C library functions might do. Also ensure that an error
is thrown for Inf (or otherwise out-of-range) input, except for atan/atan2
which should accept it.
All these behaviors should now conform to the POSIX spec; previously, all
our popular platforms deviated from that in one case or another.
The main remaining platform dependency here is whether the C library might
choose to throw a domain error for sin/cos/tan inputs that are large but
less than infinity. (Doing so is not unreasonable, since once a single
unit-in-the-last-place exceeds PI, there can be no significance at all in
the result; however there doesn't seem to be any suggestion in POSIX that
such an error is allowed.) We will report such errors if they are reported
via "errno", but not if they are reported via "fetestexcept" which is the
other mechanism sanctioned by POSIX. Some preliminary experiments with
fetestexcept indicated that it might also report errors we could do
without, such as complaining about underflow at an unreasonably large
threshold. So let's skip that complexity for now.
Dean Rasheed, reviewed by Michael Paquier
Commit e529cd4ffa introduced an Assert requiring NAMEDATALEN to be
less than MAX_LEVENSHTEIN_STRLEN, which has been 255 for a long time.
Since up to that instant we had always allowed NAMEDATALEN to be
substantially more than that, this was ill-advised.
It's debatable whether we need MAX_LEVENSHTEIN_STRLEN at all (versus
putting a CHECK_FOR_INTERRUPTS into the loop), or whether it has to be
so tight; but this patch takes the narrower approach of just not applying
the MAX_LEVENSHTEIN_STRLEN limit to calls from the parser.
Trusting the parser for this seems reasonable, first because the strings
are limited to NAMEDATALEN which is unlikely to be hugely more than 256,
and second because the maximum distance is tightly constrained by
MAX_FUZZY_DISTANCE (though we'd forgotten to make use of that limit in one
place). That means the cost is not really O(mn) but more like O(max(m,n)).
Relaxing the limit for user-supplied calls is left for future research;
given the lack of complaints to date, it doesn't seem very high priority.
In passing, fix confusion between lengths-in-bytes and lengths-in-chars
in comments and error messages.
Per gripe from Kevin Day; solution suggested by Robert Haas. Back-patch
to 9.5 where the unwanted restriction was introduced.
Historically, extract() just returned zero for any case involving an
infinite timestamp[tz] input; even cases in which the unit name was
invalid. This is not very sensible. Instead, return infinity or
-infinity as appropriate when the requested field is one that is
monotonically increasing (e.g, year, epoch), or NULL when it is not
(e.g., day, hour). Also, throw the expected errors for bad unit names.
BACKWARDS INCOMPATIBLE CHANGE
Vitaly Burovoy, reviewed by Vik Fearing
Given the limited range of i, these shifts should not cause any
problem, but that apparently doesn't stop some compilers from
whining about them.
David Rowley
The amvalidate functions added in commit 65c5fcd353 were on the
crude side. Improve them in a few ways:
* Perform signature checking for operators and support functions.
* Apply more thorough checks for missing operators and functions,
where possible.
* Instead of reporting problems as ERRORs, report most problems as INFO
messages and make the amvalidate function return FALSE. This allows
more than one problem to be discovered per run.
* Report object names rather than OIDs, and work a bit harder on making
the messages understandable.
Also, remove a few more opr_sanity regression test queries that are
now superseded by the amvalidate checks.
Putting a reference to an expanded-format value into a Const node would be
a bad idea for a couple of reasons. It'd be possible for the supposedly
immutable Const to change value, if something modified the referenced
variable ... in fact, if the Const's reference were R/W, any function that
has the Const as argument might itself change it at runtime. Also, because
datumIsEqual() is pretty simplistic, the Const might fail to compare equal
to other Consts that it should compare equal to, notably including copies
of itself. This could lead to unexpected planner behavior, such as "could
not find pathkey item to sort" errors or inferior plans.
I have not been able to find any way to get an expanded value into a Const
within the existing core code; but Paul Ramsey was able to trigger the
problem by writing a datatype input function that returns an expanded
value.
The best fix seems to be to establish a rule that varlena values being
placed into Const nodes should be passed through pg_detoast_datum().
That will do nothing (and cost little) in normal cases, but it will flatten
expanded values and thereby avoid the above problems. Also, it will
convert short-header or compressed values into canonical format, which will
avoid possible unexpected lack-of-equality issues for those cases too.
And it provides a last-ditch defense against putting a toasted value into
a Const, which we already knew was dangerous, cf commit 2b0c86b665.
(In the light of this discussion, I'm no longer sure that that commit
provided 100% protection against such cases, but this fix should do it.)
The test added in commit 65c3d05e18 to catch datatype input functions
with unstable results would fail for functions that returned expanded
values; but it seems a bit uncharitable to deem a result unstable just
because it's expressed in expanded form, so revise the coding so that we
check for bitwise equality only after applying pg_detoast_datum(). That's
a sufficient condition anyway given the new rule about detoasting when
forming a Const.
Back-patch to 9.5 where the expanded-object facility was added. It's
possible that this should go back further; but in the absence of clear
evidence that there's any live bug in older branches, I'll refrain for now.
2PC state info is written only to WAL at PREPARE, then read back from WAL at
COMMIT PREPARED/ABORT PREPARED. Prepared transactions that live past one bufmgr
checkpoint cycle will be written to disk in the same form as previously. Crash
recovery path is not altered. Measured performance gains of 50-100% for short
2PC transactions by completely avoiding writing files and fsyncing. Other
optimizations still available, further patches in related areas expected.
Stas Kelvich and heavily edited by Simon Riggs
Based upon earlier ideas and patches by Michael Paquier and Heikki Linnakangas,
a concrete example of how Postgres-XC has fed back ideas into PostgreSQL.
Reviewed by Michael Paquier, Jeff Janes and Andres Freund
Performance testing by Jesper Pedersen
Previously we didn’t have a generic WAL page read callback function,
surprisingly. Logical decoding has logical_read_local_xlog_page(), which was
actually generic, so move that to xlogfunc.c and rename to
read_local_xlog_page().
Maintain logical_read_local_xlog_page() so existing callers still work.
As requested by Michael Paquier, Alvaro Herrera and Andres Freund
The core innovation of this patch is the introduction of the concept
of a partial path; that is, a path which if executed in parallel will
generate a subset of the output rows in each process. Gathering a
partial path produces an ordinary (complete) path. This allows us to
generate paths for parallel joins by joining a partial path for one
side (which at the baserel level is currently always a Partial Seq
Scan) to an ordinary path on the other side. This is subject to
various restrictions at present, especially that this strategy seems
unlikely to be sensible for merge joins, so only nested loops and
hash joins paths are generated.
This also allows an Append node to be pushed below a Gather node in
the case of a partitioned table.
Testing revealed that early versions of this patch made poor decisions
in some cases, which turned out to be caused by the fact that the
original cost model for Parallel Seq Scan wasn't very good. So this
patch tries to make some modest improvements in that area.
There is much more to be done in the area of generating good parallel
plans in all cases, but this seems like a useful step forward.
Patch by me, reviewed by Dilip Kumar and Amit Kapila.
Aggregate nodes now have two new modes: a "partial" mode where they
output the unfinalized transition state, and a "finalize" mode where
they accept unfinalized transition states rather than individual
values as input.
These new modes are not used anywhere yet, but they will be necessary
for parallel aggregation. The infrastructure also figures to be
useful for cases where we want to aggregate local data and remote
data via the FDW interface, and want to bring back partial aggregates
from the remote side that can then be combined with locally generated
partial aggregates to produce the final value. It may also be useful
even when neither FDWs nor parallelism are in play, as explained in
the comments in nodeAgg.c.
David Rowley and Simon Riggs, reviewed by KaiGai Kohei, Heikki
Linnakangas, Haribabu Kommi, and me.
This will enable PL/Java to be cleanly compiled, as dynloader.h is a
requirement.
Report by Chapman Flack
Patch by Michael Paquier
Backpatch through 9.1
GIN had some minor issues too, mostly using "internal" where something
else would be more appropriate. I went with the same approach as in
9ff60273e3, namely preferring the opclass' indexed datatype for
arguments that receive an operator RHS value, even if that's not
necessarily what they really are.
Again, this is with an eye to having a uniform rule for ginvalidate()
to check support function signatures.
The conventions specified by the GiST SGML documentation were widely
ignored. For example, the strategy-number argument for "consistent" and
"distance" functions is specified to be a smallint, but most of the
built-in support functions declared it as an integer, and for that matter
the core code passed it using Int32GetDatum not Int16GetDatum. None of
that makes any real difference at runtime, but it's quite confusing for
newcomers to the code, and it makes it very hard to write an amvalidate()
function that checks support function signatures. So let's try to instill
some consistency here.
Another similar issue is that the "query" argument is not of a single
well-defined type, but could have different types depending on the strategy
(corresponding to search operators with different righthand-side argument
types). Some of the functions threw up their hands and declared the query
argument as being of "internal" type, which surely isn't right ("any" would
have been more appropriate); but the majority position seemed to be to
declare it as being of the indexed data type, corresponding to a search
operator with both input types the same. So I've specified a convention
that that's what to do always.
Also, the result of the "union" support function actually must be of the
index's storage type, but the documentation suggested declaring it to
return "internal", and some of the functions followed that. Standardize
on telling the truth, instead.
Similarly, standardize on declaring the "same" function's inputs as
being of the storage type, not "internal".
Also, somebody had forgotten to add the "recheck" argument to both
the documentation of the "distance" support function and all of their
SQL declarations, even though the C code was happily using that argument.
Clean that up too.
Fix up some other omissions in the docs too, such as documenting that
union's second input argument is vestigial.
So far as the errors in core function declarations go, we can just fix
pg_proc.h and bump catversion. Adjusting the erroneous declarations in
contrib modules is more debatable: in principle any change in those
scripts should involve an extension version bump, which is a pain.
However, since these changes are purely cosmetic and make no functional
difference, I think we can get away without doing that.
This code has been there for a long time, but it's never really been
needed. Cygwin has its own utility for registering, unregistering,
stopping and starting Windows services, and that's what's used in the
Cygwin postgres packages. So now pg_ctl for Cygwin looks like it is for
any Unix platform.
Michael Paquier and me
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
