During exit, the logical replication apply worker tries to release session
level locks, if any. However, if the apply worker exits due to an error
before its connection is initialized, trying to release locks can lead to
assertion failure. The locks will be acquired once the worker is
initialized, so we don't need to release them till the worker
initialization is complete.
Reported-by: Alexander Lakhin
Author: Hou Zhijie based on inputs from Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/2185d65f-5aae-3efa-c48f-fb42b173ef5c@gmail.com
This option is normally false, but can be set to true to obtain
the legacy behavior where the subscription runs with the permissions
of the subscription owner rather than the permissions of the
table owner. The advantages of this mode are (1) it doesn't require
that the subscription owner have permission to SET ROLE to each
table owner and (2) since no role switching occurs, the
SECURITY_RESTRICTED_OPERATION restrictions do not apply.
On the downside, it allows any table owner to easily usurp
the privileges of the subscription owner - basically, to take
over their account. Because that's generally quite undesirable,
we don't make this mode the default, but we do make it available,
just in case the new behavior causes too many problems for someone.
Discussion: http://postgr.es/m/CA+TgmoZ-WEeG6Z14AfH7KhmpX2eFh+tZ0z+vf0=eMDdbda269g@mail.gmail.com
Up until now, logical replication actions have been performed as the
subscription owner, who will generally be a superuser. Commit
cec57b1a0f documented hazards
associated with that situation, namely, that any user who owns a
table on the subscriber side could assume the privileges of the
subscription owner by attaching a trigger, expression index, or
some other kind of executable code to it. As a remedy, it suggested
not creating configurations where users who are not fully trusted
own tables on the subscriber.
Although that will work, it basically precludes using logical
replication in the way that people typically want to use it,
namely, to replicate a database from one node to another
without necessarily having any restrictions on which database
users can own tables. So, instead, change logical replication to
execute INSERT, UPDATE, DELETE, and TRUNCATE operations as the
table owner when they are replicated.
Since this involves switching the active user frequently within
a session that is authenticated as the subscription user, also
impose SECURITY_RESTRICTED_OPERATION restrictions on logical
replication code. As an exception, if the table owner can SET
ROLE to the subscription owner, these restrictions have no
security value, so don't impose them in that case.
Subscription owners are now required to have the ability to
SET ROLE to every role that owns a table that the subscription
is replicating. If they don't, replication will fail. Superusers,
who normally own subscriptions, satisfy this property by default.
Non-superusers users who own subscriptions will need to be
granted the roles that own relevant tables.
Patch by me, reviewed (but not necessarily in its entirety) by
Jelte Fennema, Jeff Davis, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoaSCkg9ww9oppPqqs+9RVqCexYCE6Aq=UsYPfnOoDeFkw@mail.gmail.com
This role can be granted to non-superusers to allow them to issue
CREATE SUBSCRIPTION. The non-superuser must additionally have CREATE
permissions on the database in which the subscription is to be
created.
Most forms of ALTER SUBSCRIPTION, including ALTER SUBSCRIPTION .. SKIP,
now require only that the role performing the operation own the
subscription, or inherit the privileges of the owner. However, to
use ALTER SUBSCRIPTION ... RENAME or ALTER SUBSCRIPTION ... OWNER TO,
you also need CREATE permission on the database. This is similar to
what we do for schemas. To change the owner of a schema, you must also
have permission to SET ROLE to the new owner, similar to what we do
for other object types.
Non-superusers are required to specify a password for authentication
and the remote side must use the password, similar to what is required
for postgres_fdw and dblink. A superuser who wants a non-superuser to
own a subscription that does not rely on password authentication may
set the new password_required=false property on that subscription. A
non-superuser may not set password_required=false and may not modify a
subscription that already has password_required=false.
This new password_required subscription property works much like the
eponymous postgres_fdw property. In both cases, the actual semantics
are that a password is not required if either (1) the property is set
to false or (2) the relevant user is the superuser.
Patch by me, reviewed by Andres Freund, Jeff Davis, Mark Dilger,
and Stephen Frost (but some of those people did not fully endorse
all of the decisions that the patch makes).
Discussion: http://postgr.es/m/CA+TgmoaDH=0Xj7OBiQnsHTKcF2c4L+=gzPBUKSJLh8zed2_+Dg@mail.gmail.com
Using REPLICA IDENTITY FULL on the publisher can lead to a full table scan
per tuple change on the subscription when REPLICA IDENTITY or PK index is
not available. This makes REPLICA IDENTITY FULL impractical to use apart
from some small number of use cases.
This patch allows using indexes other than PRIMARY KEY or REPLICA
IDENTITY on the subscriber during apply of update/delete. The index that
can be used must be a btree index, not a partial index, and it must have
at least one column reference (i.e. cannot consist of only expressions).
We can uplift these restrictions in the future. There is no smart
mechanism to pick the index. If there is more than one index that
satisfies these requirements, we just pick the first one. We discussed
using some of the optimizer's low-level APIs for this but ruled it out
as that can be a maintenance burden in the long run.
This patch improves the performance in the vast majority of cases and the
improvement is proportional to the amount of data in the table. However,
there could be some regression in a small number of cases where the indexes
have a lot of duplicate and dead rows. It was discussed that those are
mostly impractical cases but we can provide a table or subscription level
option to disable this feature if required.
Author: Onder Kalaci, Amit Kapila
Reviewed-by: Peter Smith, Shi yu, Hou Zhijie, Vignesh C, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/CACawEhVLqmAAyPXdHEPv1ssU2c=dqOniiGz7G73HfyS7+nGV4w@mail.gmail.com
While testing a fix for bug #17823, I discovered that EvalPlanQualStart
failed to copy es_rteperminfos from the parent EState, resulting in
failure if anything in EPQ execution wanted to consult that information.
This led me to conclude that commit a61b1f748 had been too haphazard
about where to fill es_rteperminfos, and that we need to be sure that
that happens exactly where es_range_table gets filled. So I changed the
signature of ExecInitRangeTable to help ensure that this new requirement
doesn't get missed. (Indeed, pgoutput.c was also failing to fill it.
Maybe we don't ever need it there, but I wouldn't bet on that.)
No test case yet; one will arrive with the fix for #17823.
But that needs to be back-patched, while this fix is HEAD-only.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
Enforce wal_retrieve_retry_interval on a per-subscription basis,
rather than globally, and arrange to skip that delay in case of
an intentional worker exit. This probably makes little difference
in the field, where apply workers wouldn't be restarted often;
but it has a significant impact on the runtime of our logical
replication regression tests (even though those tests use
artificially-small wal_retrieve_retry_interval settings already).
Nathan Bossart, with mostly-cosmetic editorialization by me
Discussion: https://postgr.es/m/20221122004119.GA132961@nathanxps13
The code that decides the apply action missed to handle non-transactional
messages and we didn't catch it in our testing as currently such messages
are simply ignored by the apply worker. This was introduced by changes in
commit 216a784829.
While testing this, I noticed that we forgot to reset stream_xid after
processing the stream stop message which could also result in the wrong
apply action after the fix for non-transactional messages.
In passing, change assert to elog for unexpected apply action in some of
the routines so as to catch the problems in the production environment, if
any.
Reported-by: Tomas Vondra
Author: Amit Kapila
Reviewed-by: Tomas Vondra, Sawada Masahiko, Hou Zhijie
Discussion: https://postgr.es/m/984ff689-adde-9977-affe-cd6029e850be@enterprisedb.com
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Most callers of BufFileRead() want to check whether they read the full
specified length. Checking this at every call site is very tedious.
This patch provides additional variants BufFileReadExact() and
BufFileReadMaybeEOF() that include the length checks.
I considered changing BufFileRead() itself, but this function is also
used in extensions, and so changing the behavior like this would
create a lot of problems there. The new names are analogous to the
existing LogicalTapeReadExact().
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f3501945-c591-8cc3-5ef0-b72a2e0eaa9c@enterprisedb.com
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Waken related worker processes immediately at commit of a transaction
that has performed ALTER SUBSCRIPTION (including the RENAME and
OWNER variants). This reduces the response time for such operations.
In the real world that might not be worth much, but it shaves several
seconds off the runtime for the subscription test suite.
In the case of PREPARE, we just throw away this notification state;
it doesn't seem worth the work to preserve it. The workers will
still react after the eventual COMMIT PREPARED, but not as quickly.
Nathan Bossart
Discussion: https://postgr.es/m/20221122004119.GA132961@nathanxps13
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
ri_RootToPartitionMap is currently only initialized for tuple routing
target partitions, though a future commit will need the ability to use
it even for the non-partition child tables, so make adjustments to the
decouple it from the partitioning code.
Also, make it lazily initialized via ExecGetRootToChildMap(), making
that function its preferred access path. Existing third-party code
accessing it directly should no longer do so; consequently, it's been
renamed to ri_RootToChildMap, which also makes it consistent with
ri_ChildToRootMap.
ExecGetRootToChildMap() houses the logic of setting the map appropriately
depending on whether a given child relation is partition or not.
To support this, also add a separate entry point for TupleConversionMap
creation that receives an AttrMap. No new code here, just split an
existing function in two.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEYUhDXSK5BTvG_xk=eaAEJCD4GS3C6uH7ybBvv+Z_Tmg@mail.gmail.com
Since partitions can be foreign tables not only plain tables, but
logical replication only supports plain tables, we'd better check the
relkind of a partition after we find it. (There was some discussion
of checking this when adding a partitioned table to a subscription;
but that would be inadequate since the troublesome partition could be
added later.) Without this, the situation leads to a segfault or
assertion failure.
In passing, add a separate variable for the target Relation of
a cross-partition UPDATE; reusing partrel seemed mighty confusing
and error-prone.
Shi Yu and Tom Lane, per report from Ilya Gladyshev. Back-patch
to v13 where logical replication into partitioned tables became
a thing.
Discussion: https://postgr.es/m/6b93e3748ba43298694f376ca8797279d7945e29.camel@gmail.com
Make a common replication origin name formatting function to replace
multiple snprintf() expressions. This also includes logic previously done
by ReplicationOriginNameForTablesync().
This makes the code to generate the origin name consistent among apply
worker and tablesync worker.
Author: Peter Smith
Reviewed-By: Aleksander Alekseev
Discussion: https://postgr.es/m/CAHut%2BPsa8hhfSE6ozUK-ih7GkQziAVAf4f3bqiXEj2nQiu-43g%40mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
In logical replication, we will check if the target table on the
subscriber is updatable by comparing the replica identity of the table on
the publisher with the table on the subscriber. When the target table is a
partitioned table, we only check its replica identity but not for the
partition tables. This leads to assertion failure while applying changes
for update/delete as we expect those to succeed only when the
corresponding partition table has a primary key or has a replica
identity defined.
Fix it by checking the replica identity of the partition table while
applying changes.
Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
We were not updating the partition map cache in the subscriber even when
the corresponding remote rel is changed. Due to this data was getting
incorrectly replicated for partition tables after the publisher has
changed the table schema.
Fix it by resetting the required entries in the partition map cache after
receiving a new relation mapping from the publisher.
Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
pgstat_report_stat() is only supposed to be called outside of transactions. In
5891c7a8ed I added a pgstat_report_stat() call into LogicalRepApplyLoop()'s
timeout branch. While not commonly reached inside a transaction, it is
reachable (e.g. due to network bottlenecks or the sender being stalled / slow
for some reason).
To fix, add a !IsTransactionState() check.
No test added because there's no easy way to reproduce this case without
patching the code.
Reported-By: Erik Rijkers <er@xs4all.nl>
Discussion: https://postgr.es/m/b3463b8c-2328-dcac-0136-af95715493c1@xs4all.nl
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
This feature allows skipping the transaction on subscriber nodes.
If incoming change violates any constraint, logical replication stops
until it's resolved. Currently, users need to either manually resolve the
conflict by updating a subscriber-side database or by using function
pg_replication_origin_advance() to skip the conflicting transaction. This
commit introduces a simpler way to skip the conflicting transactions.
The user can specify LSN by ALTER SUBSCRIPTION ... SKIP (lsn = XXX),
which allows the apply worker to skip the transaction finished at
specified LSN. The apply worker skips all data modification changes within
the transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Hou Zhijie, Peter Eisentraut, Amit Kapila, Shi Yu, Vignesh C, Greg Nancarrow, Haiying Tang, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Logical replication apply workers for a subscription can easily get stuck
in an infinite loop of attempting to apply a change, triggering an error
(such as a constraint violation), exiting with the error written to the
subscription server log, and restarting.
To partially remedy the situation, this patch adds a new subscription
option named 'disable_on_error'. To be consistent with old behavior, this
option defaults to false. When true, both the tablesync worker and apply
worker catch any errors thrown and disable the subscription in order to
break the loop. The error is still also written in the logs.
Once the subscription is disabled, users can either manually resolve the
conflict/error or skip the conflicting transaction by using
pg_replication_origin_advance() function. After resolving the conflict,
users need to enable the subscription to allow apply process to proceed.
Author: Osumi Takamichi and Mark Dilger
Reviewed-by: Greg Nancarrow, Vignesh C, Amit Kapila, Wang wei, Tang Haiying, Peter Smith, Masahiko Sawada, Shi Yu
Discussion : https://postgr.es/m/DB35438F-9356-4841-89A0-412709EBD3AB%40enterprisedb.com
This commits adds both the finish LSN (commit_lsn in case transaction got
committed, prepare_lsn in case of a prepared transaction, etc.) and
replication origin name to the existing error context message.
This will help users in specifying the origin name and transaction finish
LSN to pg_replication_origin_advance() SQL function to skip a particular
transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Euler Taveira, and Amit Kapila
Discussion: https://postgr.es/m/CAD21AoBarBf2oTF71ig2g_o=3Z_Dt6_sOpMQma1kFgbnA5OZ_w@mail.gmail.com
Previously, the message for logical replication worker errcontext is
incrementally built, which was not translation friendly. Instead, we use
complete sentences with if-else branches.
We also remove the commit timestamp from the context message since it's
not important information and made the message long.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, and Amit Kapila
Discussion: https://postgr.es/m/CAD21AoBarBf2oTF71ig2g_o=3Z_Dt6_sOpMQma1kFgbnA5OZ_w@mail.gmail.com
It was decided (refer to the Discussion link below) that the stats
collector is not an appropriate place to store the error information of
subscription workers.
This patch changes the pg_stat_subscription_workers view (introduced by
commit 8d74fc96db) so that it stores only statistics counters:
apply_error_count and sync_error_count, and has one entry for
each subscription. The removed error information such as error-XID and
the error message would be stored in another way in the future which is
more reliable and persistent.
After removing these error details, there is no longer any relation
information, so the subscription statistics are now a cluster-wide
statistics.
The patch also changes the view name to pg_stat_subscription_stats since
the word "worker" is an implementation detail that we use one worker for
one tablesync and one apply.
Author: Masahiko Sawada, based on suggestions by Andres Freund
Reviewed-by: Peter Smith, Haiying Tang, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/20220125063131.4cmvsxbz2tdg6g65@alap3.anarazel.de
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
Prevent logical replication workers from performing insert, update,
delete, truncate, or copy commands on tables unless the subscription
owner has permission to do so.
Prevent subscription owners from circumventing row-level security by
forbidding replication into tables with row-level security policies
which the subscription owner is subject to, without regard to whether
the policy would ordinarily allow the INSERT, UPDATE, DELETE or
TRUNCATE which is being replicated. This seems sufficient for now, as
superusers, roles with bypassrls, and target table owners should still
be able to replicate despite RLS policies. We can revisit the
question of applying row-level security policies on a per-row basis if
this restriction proves too severe in practice.
Author: Mark Dilger
Reviewed-by: Jeff Davis, Andrew Dunstan, Ronan Dunklau
Discussion: https://postgr.es/m/9DFC88D3-1300-4DE8-ACBC-4CEF84399A53%40enterprisedb.com
This commit adds a new system view pg_stat_subscription_workers, that
shows information about any errors which occur during the application of
logical replication changes as well as during performing initial table
synchronization. The subscription statistics entries are removed when the
corresponding subscription is removed.
It also adds an SQL function pg_stat_reset_subscription_worker() to reset
single subscription errors.
The contents of this view can be used by an upcoming patch that skips the
particular transaction that conflicts with the existing data on the
subscriber.
This view can be extended in the future to track other xact related
statistics like the number of xacts committed/aborted for subscription
workers.
Author: Masahiko Sawada
Reviewed-by: Greg Nancarrow, Hou Zhijie, Tang Haiying, Vignesh C, Dilip Kumar, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
All such code deals with this global variable in one of three ways.
Sometimes the same functions use it in more than one of these ways
at the same time.
First, sometimes it's an implicit argument to one or more functions
being called in xlog.c or elsewhere, and must be set to the
appropriate value before calling those functions lest they
misbehave. In those cases, it is now passed as an explicit argument
instead.
Second, sometimes it's used to obtain the current timeline after
the end of recovery, i.e. the timeline to which WAL is being
written and flushed. Such code now calls GetWALInsertionTimeLine()
or relies on the new out parameter added to GetFlushRecPtr().
Third, sometimes it's used during recovery to store the current
replay timeline. That can change, so such code must generally
update the value before each use. It can still do that, but must
now use a local variable instead.
The net effect of these changes is to reduce by a fair amount the
amount of code that is directly accessing this global variable.
That's good, because history has shown that we don't always think
clearly about which timeline ID it's supposed to contain at any
given point in time, or indeed, whether it has been or needs to
be initialized at any given point in the code.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com