The code paths for three different OSes finished up with three different
ways of excluding C[.xxx] and POSIX from consideration. Merge them.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20210117215940.GE8560%40telsasoft.com
Instead of an unsightly internal "cache lookup failed" message, just
return NULL for bad OIDs, as is the convention for other similar things.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20210117215940.GE8560%40telsasoft.com
Commit 2f2007fbb did this partially, but there were two remaining
warts. checkcondition_gin handled some uncertain cases by setting
the out-of-band recheck flag, some by returning TS_MAYBE, and some
by doing both. Meanwhile, TS_execute arbitrarily converted a
TS_MAYBE result to TS_YES. Thus, if checkcondition_gin chose to
only return TS_MAYBE, the outcome would be TS_YES with no recheck
flag, potentially resulting in wrong query outputs.
The case where this'd happen is if there were GIN_MAYBE entries
in the indexscan results passed to gin_tsquery_[tri]consistent,
which so far as I can see would only happen if the tidbitmap used
to accumulate indexscan results grew large enough to become lossy.
I initially thought of fixing this by ensuring we always set the
recheck flag as well as returning TS_MAYBE in uncertain cases.
But that errs in the other direction, potentially forcing rechecks
of rows that provably match the query (since the recheck flag
remains set even if TS_execute later finds that the answer must be
TS_YES). Instead, let's get rid of the out-of-band recheck flag
altogether and rely on returning TS_MAYBE. This requires exporting
a version of TS_execute that will actually return the full ternary
result of the evaluation ... but we likely should have done that
to start with.
Unfortunately it doesn't seem practical to add a regression test case
that covers this: the amount of data needed to cause the GIN bitmap to
become lossy results in a longer runtime than I think we want to have
in the tests. (I'm wondering about allowing smaller work_mem settings
to ameliorate that, but it'd be a matter for a separate patch.)
Per bug #16865 from Dimitri Nüscheler. Back-patch to v13 where
the faulty commit came in.
Discussion: https://postgr.es/m/16865-4ffdc3e682e6d75b@postgresql.org
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
With its current design, a careless use of pg_cryptohash_final() could
would result in an out-of-bound write in memory as the size of the
destination buffer to store the result digest is not known to the
cryptohash internals, without the caller knowing about that. This
commit adds a new argument to pg_cryptohash_final() to allow such sanity
checks, and implements such defenses.
The internals of SCRAM for HMAC could be tightened a bit more, but as
everything is based on SCRAM_KEY_LEN with uses particular to this code
there is no need to complicate its interface more than necessary, and
this comes back to the refactoring of HMAC in core. Except that, this
minimizes the uses of the existing DIGEST_LENGTH variables, relying
instead on sizeof() for the result sizes. In ossp-uuid, this also makes
the code more defensive, as it already relied on dce_uuid_t being at
least the size of a MD5 digest.
This is in philosophy similar to cfc40d3 for base64.c and aef8948 for
hex.c.
Reported-by: Ranier Vilela
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAEudQAoqEGmcff3J4sTSV-R_16Monuz-UpJFbf_dnVH=APr02Q@mail.gmail.com
Given a regex pattern with a very long fixed prefix (approaching 500
characters), the result of pow(FIXED_CHAR_SEL, fixed_prefix_len) can
underflow to zero. Typically the preceding selectivity calculation
would have underflowed as well, so that we compute 0/0 and get NaN.
In released branches this leads to an assertion failure later on.
That doesn't happen in HEAD, for reasons I've not explored yet,
but it's surely still a bug.
To fix, just skip the division when the pow() result is zero, so
that we'll (most likely) return a zero selectivity estimate. In
the edge cases where "sel" didn't yet underflow, perhaps this
isn't desirable, but I'm not sure that the case is worth spending
a lot of effort on. The results of regex_selectivity_sub() are
barely worth the electrons they're written on anyway :-(
Per report from Alexander Lakhin. Back-patch to all supported versions.
Discussion: https://postgr.es/m/6de0a0c3-ada9-cd0c-3e4e-2fa9964b41e3@gmail.com
Explicitly testing for INT_MIN and INT_MAX isn't particularly good
style; it's tedious and may draw useless compiler warnings on
machines where int and long are the same width. We invented
strtoint() precisely for this usage, so use that instead.
While here, remove gratuitous variations in the way the tests for
did-strtoint-succeed were spelled. Also, avoid attempting to
negate INT_MIN; that would probably work given that the result
is implicitly cast to uint32, but I think it's nominally undefined
behavior.
Per gripe from Ranier Vilela, though this isn't his proposed patch.
Discussion: https://postgr.es/m/CAEudQAqge3QfzoBRhe59QrB_5g+NmQUj2QpzqZ9Nc7QepXGAEw@mail.gmail.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
This follows in the spirit of commit dfb75e478, which created primary
key and uniqueness constraints to improve the visibility of constraints
imposed on the system catalogs. While our catalogs contain many
foreign-key-like relationships, they don't quite follow SQL semantics,
in that the convention for an omitted reference is to write zero not
NULL. Plus, we have some cases in which there are arrays each of whose
elements is supposed to be an FK reference; SQL has no way to model that.
So we can't create actual foreign key constraints to describe the
situation. Nonetheless, we can collect and use knowledge about these
relationships.
This patch therefore adds annotations to the catalog header files to
declare foreign-key relationships. (The BKI_LOOKUP annotations cover
simple cases, but we weren't previously distinguishing which such
columns are allowed to contain zeroes; we also need new markings for
multi-column FK references.) Then, Catalog.pm and genbki.pl are
taught to collect this information into a table in a new generated
header "system_fk_info.h". The only user of that at the moment is
a new SQL function pg_get_catalog_foreign_keys(), which exposes the
table to SQL. The oidjoins regression test is rewritten to use
pg_get_catalog_foreign_keys() to find out which columns to check.
Aside from removing the need for manual maintenance of that test
script, this allows it to cover numerous relationships that were not
checked by the old implementation based on findoidjoins. (As of this
commit, 217 relationships are checked by the test, versus 181 before.)
Discussion: https://postgr.es/m/3240355.1612129197@sss.pgh.pa.us
This adds the SQL standard feature that adds the SEARCH and CYCLE
clauses to recursive queries to be able to do produce breadth- or
depth-first search orders and detect cycles. These clauses can be
rewritten into queries using existing syntax, and that is what this
patch does in the rewriter.
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/db80ceee-6f97-9b4a-8ee8-3ba0c58e5be2@2ndquadrant.com
On machines where sizeof(Datum) > sizeof(Oid) (that is, any 64-bit
platform), the previous coding would compute a misaligned
workspace->index pointer if nupper is odd. Architectures where
misaligned access is a hard no-no would then fail. This appears
to explain why thorntail is unhappy but other buildfarm members
are not.
The same code pattern was repeated four times when compiling a SHA-2
hash. This refactoring has the advantage to issue a compilation warning
if a new value is added to pg_cryptohash_type, so as anybody doing an
addition in this area would need to consider if support for a new SQL
function is needed or not.
Author: Sehrope Sarkuni, Michael Paquier
Discussion: https://postgr.es/m/YA7DvLRn2xnTgsMc@paquier.xyz
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
This add counters for number of sessions, the different kind of session
termination types, and timers for how much time is spent in active vs
idle in a database to pg_stat_database.
Internally this also renames the parameter "force" to disconnect. This
was the only use-case for the parameter before, so repurposing it to
this mroe narrow usecase makes things cleaner than inventing something
new.
Author: Laurenz Albe
Reviewed-By: Magnus Hagander, Soumyadeep Chakraborty, Masahiro Ikeda
Discussion: https://postgr.es/m/b07e1f9953701b90c66ed368656f2aef40cac4fb.camel@cybertec.at
This commit addresses some issues with c3826f83 that moved the hex
decoding routine to src/common/:
- The decoding function lacked overflow checks, so when used for
security-related features it was an open door to out-of-bound writes if
not carefully used that could remain undetected. Like the base64
routines already in src/common/ used by SCRAM, this routine is reworked
to check for overflows by having the size of the destination buffer
passed as argument, with overflows checked before doing any writes.
- The encoding routine was missing. This is moved to src/common/ and
it gains the same overflow checks as the decoding part.
On failure, the hex routines of src/common/ issue an error as per the
discussion done to make them usable by frontend tools, but not by shared
libraries. Note that this is why ECPG is left out of this commit, and
it still includes a duplicated logic doing hex encoding and decoding.
While on it, this commit uses better variable names for the source and
destination buffers in the existing escape and base64 routines in
encode.c and it makes them more robust to overflow detection. The
previous core code issued a FATAL after doing out-of-bound writes if
going through the SQL functions, which would be enough to detect
problems when working on changes that impacted this area of the
code. Instead, an error is issued before doing an out-of-bound write.
The hex routines were being directly called for bytea conversions and
backup manifests without such sanity checks. The current calls happen
to not have any problems, but careless uses of such APIs could easily
lead to CVE-class bugs.
Author: Bruce Momjian, Michael Paquier
Reviewed-by: Sehrope Sarkuni
Discussion: https://postgr.es/m/20201231003557.GB22199@momjian.us
Forced cache invalidation (CLOBBER_CACHE_ALWAYS) has been impractical
to use for testing in PostgreSQL because it's so slow and because it's
toggled on/off only at build time. It is helpful when hunting bugs in
any code that uses the sycache/relcache because causes cache
invalidations to be injected whenever it would be possible for an
invalidation to occur, whether or not one was really pending.
Address this by providing run-time control over cache clobber
behaviour using the new debug_invalidate_system_caches_always GUC.
Support is not compiled in at all unless assertions are enabled or
CLOBBER_CACHE_ENABLED is explicitly defined at compile time. It
defaults to 0 if compiled in, so it has negligible effect on assert
build performance by default.
When support is compiled in, test code can now set
debug_invalidate_system_caches_always=1 locally to a backend to test
specific queries, functions, extensions, etc. Or tests can toggle it
globally for a specific test case while retaining normal performance
during test setup and teardown.
For backwards compatibility with existing test harnesses and scripts,
debug_invalidate_system_caches_always defaults to 1 if
CLOBBER_CACHE_ALWAYS is defined, and to 3 if CLOBBER_CACHE_RECURSIVE
is defined.
CLOBBER_CACHE_ENABLED is now visible in pg_config_manual.h, as is the
related RECOVER_RELATION_BUILD_MEMORY setting for the relcache.
Author: Craig Ringer <craig.ringer@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CAMsr+YF=+ctXBZj3ywmvKNUjWpxmuTuUKuv-rgbHGX5i5pLstQ@mail.gmail.com
In power_var_int(), the computation of the number of significant
digits to use in the computation used log(Abs(exp)), which isn't safe
because Abs(exp) returns INT_MIN when exp is INT_MIN. Use fabs()
instead of Abs(), so that the exponent is cast to a double before the
absolute value is taken.
Back-patch to 9.6, where this was introduced (by 7d9a4737c2).
Discussion: https://postgr.es/m/CAEZATCVd6pMkz=BrZEgBKyqqJrt2xghr=fNc8+Z=5xC6cgWrWA@mail.gmail.com
If the substring start index and length overflow when added together,
substring() misbehaved, either throwing a bogus "negative substring
length" error on a case that should succeed, or failing to complain that
a negative length is negative (and instead returning the whole string,
in most cases). Unsurprisingly, the text, bytea, and bit variants of
the function all had this issue. Rearrange the logic to ensure that
negative lengths are always rejected, and add an overflow check to
handle the other case.
Also install similar guards into detoast_attr_slice() (nee
heap_tuple_untoast_attr_slice()), since it's far from clear that
no other code paths leading to that function could pass it values
that would overflow.
Patch by myself and Pavel Stehule, per bug #16804 from Rafi Shamim.
Back-patch to v11. While these bugs are old, the common/int.h
infrastructure for overflow-detecting arithmetic didn't exist before
commit 4d6ad3125, and it doesn't seem like these misbehaviors are bad
enough to justify developing a standalone fix for the older branches.
Discussion: https://postgr.es/m/16804-f4eeeb6c11ba71d4@postgresql.org
Performance issues with the preceding patch to re-implement array
element assignment within pl/pgsql led me to realize that the read/write
parameter mechanism is misdesigned. Instead of requiring the assignment
source expression to be such that *all* its references to the target
variable could be passed as R/W, we really want to identify *one*
reference to the target variable to be passed as R/W, allowing any other
ones to be passed read/only as they would be by default. As long as the
R/W reference is a direct argument to the top-level (hence last to be
executed) function in the expression, there is no harm in R/O references
being passed to other lower parts of the expression. Nor is there any
use-case for more than one argument of the top-level function being R/W.
Hence, rewrite that logic to identify one single Param that references
the target variable, and make only that Param pass a read/write
reference, not any other Params referencing the target variable.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
This commit preserves the logic of multirange_in() but makes it more clear
what's going on. Also, this commit fixes the compiler warning spotted by the
buildfarm.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/2246043.1609290699%40sss.pgh.pa.us
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
Attempt to get selectivity estimation for @> (anymultirange, anyrange) operator
caused an error in buildfarm, because this operator was missed in switch()
of calc_hist_selectivity(). Fix that and also make regression tests reliably
check that selectivity estimation for (multi)ranges doesn't fall. Previously,
whether we test selectivity estimation for (multi)ranges depended on
whether autovacuum managed to gather concurrently to the test.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/X%2BwmgjRItuvHNBeV%40paquier.xyz
6df7a9698b has introduced a set of operators between ranges and multiranges.
Existing GiST indexes for ranges could easily support majority of them.
This commit adds support for new operators to the existing range GiST indexes.
New operators resides the same strategy numbers as existing ones. Appropriate
check function is determined using the subtype.
Catversion is bumped.
There is a set of *_internal() functions exposed in
include/utils/multirangetypes.h. This commit improves the signatures of these
functions in two ways.
* Add const qualifies where applicable.
* Replace multirange typecache argument with range typecache argument.
Multirange typecache was used solely to find the range typecache. At the
same time, range typecache is easier for the caller to find.
We have operators for checking if the multirange contains a range but don't
have the opposite. This commit improves completeness of the operator set by
adding two new operators: @> (anyrange,anymultirange) and
<@(anymultirange,anyrange).
Catversion is bumped.
Two functions multirange_range_overlaps_bsearch_comparison() and
multirange_range_contains_bsearch_comparison() contain bugs of returning -1
instead of 1. This commit fixes these bugs and adds corresponding regression
tests.
This makes existing sessions reflect "ALTER ROLE ... [NO]INHERIT" as
quickly as they have been reflecting "GRANT role_name". Back-patch to
9.5 (all supported versions).
Reviewed by Nathan Bossart.
Discussion: https://postgr.es/m/20201221095028.GB3777719@rfd.leadboat.com
The jsonb || jsonb operator arbitrarily rejected certain combinations
of scalar and non-scalar inputs, while being willing to concatenate
other combinations. This was of course quite undocumented. Rather
than trying to document it, let's just remove the restriction,
creating a uniform rule that unless we are handling an object-to-object
concatenation, non-array inputs are converted to one-element arrays,
resulting in an array-to-array concatenation. (This does not change
the behavior for any case that didn't throw an error before.)
Per complaint from Joel Jacobson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/163099.1608312033@sss.pgh.pa.us
6df7a9698b introduces multirange types, whose typanalyze function shares
infrastructure with range types typanalyze function. Since 6df7a9698b,
information about type gathered by statistics is filled from typcache.
But typalign is mistakenly always set to double. This commit fixes this
oversight.
Multiranges are basically sorted arrays of non-overlapping ranges with
set-theoretic operations defined over them.
Since v14, each range type automatically gets a corresponding multirange
datatype. There are both manual and automatic mechanisms for naming multirange
types. Once can specify multirange type name using multirange_type_name
attribute in CREATE TYPE. Otherwise, a multirange type name is generated
automatically. If the range type name contains "range" then we change that to
"multirange". Otherwise, we add "_multirange" to the end.
Implementation of multiranges comes with a space-efficient internal
representation format, which evades extra paddings and duplicated storage of
oids. Altogether this format allows fetching a particular range by its index
in O(n).
Statistic gathering and selectivity estimation are implemented for multiranges.
For this purpose, stored multirange is approximated as union range without gaps.
This field will likely need improvements in the future.
Catversion is bumped.
Discussion: https://postgr.es/m/CALNJ-vSUpQ_Y%3DjXvTxt1VYFztaBSsWVXeF1y6gTYQ4bOiWDLgQ%40mail.gmail.com
Discussion: https://postgr.es/m/a0b8026459d1e6167933be2104a6174e7d40d0ab.camel%40j-davis.com#fe7218c83b08068bfffb0c5293eceda0
Author: Paul Jungwirth, revised by me
Reviewed-by: David Fetter, Corey Huinker, Jeff Davis, Pavel Stehule
Reviewed-by: Alvaro Herrera, Tom Lane, Isaac Morland, David G. Johnston
Reviewed-by: Zhihong Yu, Alexander Korotkov
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
This patch generalizes the subscripting infrastructure so that any
data type can be subscripted, if it provides a handler function to
define what that means. Traditional variable-length (varlena) arrays
all use array_subscript_handler(), while the existing fixed-length
types that support subscripting use raw_array_subscript_handler().
It's expected that other types that want to use subscripting notation
will define their own handlers. (This patch provides no such new
features, though; it only lays the foundation for them.)
To do this, move the parser's semantic processing of subscripts
(including coercion to whatever data type is required) into a
method callback supplied by the handler. On the execution side,
replace the ExecEvalSubscriptingRef* layer of functions with direct
calls to callback-supplied execution routines. (Thus, essentially
no new run-time overhead should be caused by this patch. Indeed,
there is room to remove some overhead by supplying specialized
execution routines. This patch does a little bit in that line,
but more could be done.)
Additional work is required here and there to remove formerly
hard-wired assumptions about the result type, collation, etc
of a SubscriptingRef expression node; and to remove assumptions
that the subscript values must be integers.
One useful side-effect of this is that we now have a less squishy
mechanism for identifying whether a data type is a "true" array:
instead of wiring in weird rules about typlen, we can look to see
if pg_type.typsubscript == F_ARRAY_SUBSCRIPT_HANDLER. For this
to be bulletproof, we have to forbid user-defined types from using
that handler directly; but there seems no good reason for them to
do so.
This patch also removes assumptions that the number of subscripts
is limited to MAXDIM (6), or indeed has any hard-wired limit.
That limit still applies to types handled by array_subscript_handler
or raw_array_subscript_handler, but to discourage other dependencies
on this constant, I've moved it from c.h to utils/array.h.
Dmitry Dolgov, reviewed at various times by Tom Lane, Arthur Zakirov,
Peter Eisentraut, Pavel Stehule
Discussion: https://postgr.es/m/CA+q6zcVDuGBv=M0FqBYX8DPebS3F_0KQ6OVFobGJPM507_SZ_w@mail.gmail.com
Discussion: https://postgr.es/m/CA+q6zcVovR+XY4mfk-7oNk-rF91gH0PebnNfuUjuuDsyHjOcVA@mail.gmail.com
It was still using a scan of pg_depend instead of using the conindid
column that has been added since.
Since it is now just a catalog lookup wrapper and not related to
pg_depend, move from pg_depend.c to lsyscache.c.
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/4688d55c-9a2e-9a5a-d166-5f24fe0bf8db%40enterprisedb.com
87ae969 has created two new files called cryptohash{_openssl}.c in
src/common/, whose names overlap with the existing backend file called
cryptohashes.c dedicated to the SQL wrappers for SHA2 and MD5. This
file is renamed to cryptohashfuncs.c to be more consistent with the
surroundings and reduce the confusion with the new cryptohash interface
of src/common/.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/X8hHhaQgbMbW+aGU@paquier.xyz
Commit 6b466bf5f2 allowed pg_stat_statements to track the number of
WAL records, full page images and bytes that each statement generated.
Similarly this commit allows us to track the cluster-wide WAL statistics
counters.
New columns wal_records, wal_fpi and wal_bytes are added into the
pg_stat_wal view, and reports the total number of WAL records,
full page images and bytes generated in the , respectively.
Author: Masahiro Ikeda
Reviewed-by: Amit Kapila, Movead Li, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/35ef960128b90bfae3b3fdf60a3a860f@oss.nttdata.com
Two new routines to allocate a hash context and to free it are created,
as these become necessary for the goal behind this refactoring: switch
the all cryptohash implementations for OpenSSL to use EVP (for FIPS and
also because upstream does not recommend the use of low-level cryptohash
functions for 20 years). Note that OpenSSL hides the internals of
cryptohash contexts since 1.1.0, so it is necessary to leave the
allocation to OpenSSL itself, explaining the need for those two new
routines. This part is going to require more work to properly track
hash contexts with resource owners, but this not introduced here.
Still, this refactoring makes the move possible.
This reduces the number of routines for all SHA2 implementations from
twelve (SHA{224,256,386,512} with init, update and final calls) to five
(create, free, init, update and final calls) by incorporating the hash
type directly into the hash context data.
The new cryptohash routines are moved to a new file, called cryptohash.c
for the fallback implementations, with SHA2 specifics becoming a part
internal to src/common/. OpenSSL specifics are part of
cryptohash_openssl.c. This infrastructure is usable for more hash
types, like MD5 or HMAC.
Any code paths using the internal SHA2 routines are adapted to report
correctly errors, which are most of the changes of this commit. The
zones mostly impacted are checksum manifests, libpq and SCRAM.
Note that e21cbb4 was a first attempt to switch SHA2 to EVP, but it
lacked the refactoring needed for libpq, as done here.
This patch has been tested on Linux and Windows, with and without
OpenSSL, and down to 1.0.1, the oldest version supported on HEAD.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
currtid() and currtid2() are an undocumented set of functions whose sole
known user is the Postgres ODBC driver, able to retrieve the latest TID
version for a tuple given by the caller of those functions.
As used by Postgres ODBC, currtid() is a shortcut able to retrieve the
last TID loaded into a backend by passing an OID of 0 (magic value)
after a tuple insertion. This is removed in this commit, as it became
obsolete after the driver began using "RETURNING ctid" with inserts, a
clause supported since Postgres 8.2 (using RETURNING is better for
performance anyway as it reduces the number of round-trips to the
backend).
currtid2() is still used by the driver, so this remains around for now.
Note that this function is kept in its original shape for backward
compatibility reasons.
Per discussion with many people, including Andres Freund, Peter
Eisentraut, Álvaro Herrera, Hiroshi Inoue, Tom Lane and myself.
Bump catalog version.
Discussion: https://postgr.es/m/20200603021448.GB89559@paquier.xyz
Since we're assuming IEEE floats these days, there seems little
reason not to do this. It has the advantage that when the slope is
computed as infinite due to the presence of Inf coordinates, we get
saner behavior than before from line_construct(), and thence also
in some dependent operations such as finding the closest point.
Also fix line_construct() to special-case slope zero. The previous
coding got the right answer in most cases, but it could compute
C as NaN when the point has Inf coordinates.
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
"FPeq(infinity, infinity)" returned false, on account of getting NaN
when it subtracts the two inputs. Fix that by adding a separate
check for exact equality.
FPle() and FPge() similarly got the wrong answer for two like-signed
infinities. In those cases, we can just rearrange the comparisons
to avoid potentially subtracting infinities.
While the sibling functions FPne() etc accidentally gave the right
answers even with the internal NaN results, it seems best to make
similar adjustments to them to avoid depending on this.
FPeq() has to be converted to an inline function to avoid double
evaluations of its arguments, and I did the same for the others
just for consistency.
In passing, make the handling of NaN cases in line_eq() and
point_eq_point() simpler and easier to reason about, and perhaps
faster.
This results in just one visible regression test change: slope()
now gives DBL_MAX for two inputs of (inf,1e300), which is consistent
with what it does for (1e300,inf), so that seems like a bug fix.
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
Add hash functions for the record type as well as a hash operator
family and operator class for the record type. This enables all the
hash functionality for the record type such as hash-based plans for
UNION/INTERSECT/EXCEPT DISTINCT, recursive queries using UNION
DISTINCT, hash joins, and hash partitioning.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
Buildfarm members that lack both HAVE_LOCALE_T and USE_ICU have been
complaining about pg_newlocale_from_collation's collcollate variable.
This is evidently fallout from commit 7d1297df0, which removed the
only usage outside those two #ifdef'd code paths. Mark the variable
pg_attribute_unused(), like its sibling collctype, which has been that
way for a long time.
This provides a handy way to get, say, the last field of the string.
Use of a negative index in this way has precedent in the nearby
left() and right() functions.
The implementation scans the string twice when N < -1, but it seems
likely that N = -1 will be the huge majority of actual use cases,
so I'm not really excited about adding complexity to avoid that.
Nikhil Benesch, reviewed by Jacob Champion; cosmetic tweakage by me
Discussion: https://postgr.es/m/cbb7f861-6162-3a51-9823-97bc3aa0b638@gmail.com
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Commit 257836a7 included an assertion that a version lookup routine is
not trying to look up "C" or "POSIX", but that case is reachable with
the user-facing SQL function pg_collation_actual_version(). Remove the
assertion.
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
The SQL spec calls out nonstandard syntax for certain function calls,
for example substring() with numeric position info is supposed to be
spelled "SUBSTRING(string FROM start FOR count)". We accept many
of these things, but up to now would not print them in the same format,
instead simplifying down to "substring"(string, start, count).
That's long annoyed me because it creates an interoperability
problem: we're gratuitously injecting Postgres-specific syntax into
what might otherwise be a perfectly spec-compliant view definition.
However, the real reason for addressing it right now is to support
a planned change in the semantics of EXTRACT() a/k/a date_part().
When we switch that to returning numeric, we'll have the parser
translate EXTRACT() to some new function name (might as well be
"extract" if you ask me) and then teach ruleutils.c to reverse-list
that per SQL spec. In this way existing calls to date_part() will
continue to have the old semantics.
To implement this, invent a new CoercionForm value COERCE_SQL_SYNTAX,
and make the parser insert that rather than COERCE_EXPLICIT_CALL when
the input has SQL-spec decoration. (But if the input has the form of
a plain function call, continue to mark it COERCE_EXPLICIT_CALL, even
if it's calling one of these functions.) Then ruleutils.c recognizes
COERCE_SQL_SYNTAX as a cue to emit SQL call syntax. It can know
which decoration to emit using hard-wired knowledge about the
functions that could be called this way. (While this solution isn't
extensible without manual additions, neither is the grammar, so this
doesn't seem unmaintainable.) Notice that this solution will
reverse-list a function call with SQL decoration only if it was
entered that way; so dump-and-reload will not by itself produce any
changes in the appearance of views.
This requires adding a CoercionForm field to struct FuncCall.
(I couldn't resist the temptation to rearrange that struct's
field order a tad while I was at it.) FuncCall doesn't appear
in stored rules, so that change isn't a reason for a catversion
bump, but I did one anyway because the new enum value for
CoercionForm fields could confuse old backend code.
Possible future work:
* Perhaps CoercionForm should now be renamed to DisplayForm,
or something like that, to reflect its more general meaning.
This'd require touching a couple hundred places, so it's not
clear it's worth the code churn.
* The SQLValueFunction node type, which was invented partly for
the same goal of improving SQL-compatibility of view output,
could perhaps be replaced with regular function calls marked
with COERCE_SQL_SYNTAX. It's unclear if this would be a net
code savings, however.
Discussion: https://postgr.es/m/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
hash_array_extended() needs to pass PG_GET_COLLATION() to the hash
function of the element type. Otherwise, the hash function of a
collation-aware data type such as text will error out, since the
introduction of nondeterministic collation made hash functions require
a collation, too.
The consequence of this is that before this change, hash partitioning
using an array over text in the partition key would not work.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/32c1fdae-95c6-5dc6-058a-a90330a3b621%40enterprisedb.com
Accept that we can't get versions for such locale names for now. Users
will need to specify the newer language tag format to enable the
collation versioning feature. It's not clear that we can do automatic
conversion from the old style to the new style reliably enough for this
purpose.
Unfortunately, this means that collation versioning probably won't work
for the default collation unless you provide something like en-US at
initdb or CREATE DATABASE time (though, for reasons not yet understood,
it does seem to work on some systems). It'd be nice to find a better
solution, or document this quirk if we settle on it, but this should
unbreak the 3 failing build farm animals in the meantime.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
make_ruledef() and make_viewdef() were coded to cope with possible
null-ness of these columns, but they've been marked BKI_FORCE_NOT_NULL
for some time. So there's not really any need to do more than what
we do for the other columns of pg_rewrite, i.e. just Assert that
we got non-null results.
(There is a school of thought that says Asserts aren't the thing
to do to check for corrupt data, but surely here is not the place
to start if we want such a policy.)
Also, remove long-dead-if-indeed-it-ever-wasn't-dead handling of
an empty actions list in make_ruledef(). That's an error case
and should be treated as such. (DO INSTEAD NOTHING is represented
by a CMD_NOTHING Query, not an empty list; cf transformRuleStmt.)
Kyotaro Horiguchi, some changes by me
Discussion: https://postgr.es/m/CAEudQApoA=tMTic6xEPYP_hsNZ8XtToVThK_0x7D_aFQYowq3w@mail.gmail.com
Traditionally, the names of fmgroids.h macros for pg_proc OIDs
have been constructed from the prosrc field. But sometimes the
same C function underlies multiple pg_proc entries, forcing us
to make an arbitrary choice of which OID to reference; the other
entries are then not namable via fmgroids.h. Moreover, we could
not have macros at all for pg_proc entries that aren't for
C-coded functions.
Instead, use the proname field, and append the proargtypes field
(replacing inter-argument spaces with underscores) if proname is
not unique. Special-casing unique entries such as F_OIDEQ removes
the need to change a lot of code. Indeed, I can only find two
places in the tree that need to be adjusted; while this changes
quite a few existing entries in fmgroids.h, few of them are
referenced from C code.
With this patch, all entries in pg_proc.dat have macros in fmgroids.h.
Discussion: https://postgr.es/m/472274.1604258384@sss.pgh.pa.us
Some places were using PG_GETARG_UINT32 where PG_GETARG_TRANSACTIONID
would be more appropriate. (Of course, they are the same internally,
so there is no externally visible effect.) To do that, export
PG_GETARG_TRANSACTIONID outside of xid.c. We also export
PG_RETURN_TRANSACTIONID for symmetry, even though there are currently
no external users.
Author: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
Record the current version of dependent collations in pg_depend when
creating or rebuilding an index. When accessing the index later, warn
that the index may be corrupted if the current version doesn't match.
Thanks to Douglas Doole, Peter Eisentraut, Christoph Berg, Laurenz Albe,
Michael Paquier, Robert Haas, Tom Lane and others for very helpful
discussion.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> (earlier versions)
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This model couldn't be extended to cover the default collation, and
didn't have any information about the affected database objects when the
version changed. Remove, in preparation for a follow-up commit that
will add a new mechanism.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
This makes use of CheckBuffer() introduced in c780a7a, adding a SQL
wrapper able to do checks for all the pages of a relation. By default,
all the fork types of a relation are checked, and it is possible to
check only a given relation fork. Note that if the relation given in
input has no physical storage or is temporary, then no errors are
generated, allowing full-database checks when coupled with a simple scan
of pg_class for example. This is not limited to clusters with data
checksums enabled, as clusters without data checksums can still apply
checks on pages using the page headers or for the case of a page full of
zeros.
This function returns a set of tuples consisting of:
- The physical file where a broken page has been detected (without the
segment number as that can be AM-dependent, which can be guessed from
the block number for heap). A relative path from PGPATH is used.
- The block number of the broken page.
By default, only superusers have an access to this function but
execution rights can be granted to other users.
The feature introduced here is still minimal, and more improvements
could be done, like:
- Addition of a start and end block number to run checks on a range
of blocks, which would apply only if one fork type is checked.
- Addition of some progress reporting.
- Throttling, with configuration parameters in function input or
potentially some cost-based GUCs.
Regression tests are added for positive cases in the main regression
test suite, and TAP tests are added for cases involving the emulation of
page corruptions.
Bump catalog version.
Author: Julien Rouhaud, Michael Paquier
Reviewed-by: Masahiko Sawada, Justin Pryzby
Discussion: https://postgr.es/m/CAOBaU_aVvMjQn=ge5qPiJOPMmOj5=ii3st5Q0Y+WuLML5sR17w@mail.gmail.com
Change the attribute 'name' to 'slot_name' in pg_stat_replication_slots
view to make it clear and that way we will be consistent with the other
places like pg_stat_wal_receiver view where we display the same attribute.
In the passing, fix the typo in one of the macros in the related code.
Bump the catversion as we have modified the name in the catalog as well.
Reported-by: Noriyoshi Shinoda
Author: Noriyoshi Shinoda
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
A number of places were using appendStringInfo() when they could have been
using appendStringInfoString() instead. While there's no functionality
change there, it's just more efficient to use appendStringInfoString()
when no formatting is required. Likewise for some
appendStringInfoString() calls which were just appending a single char.
We can just use appendStringInfoChar() for that.
Additionally, many places were using appendPQExpBuffer() when they could
have used appendPQExpBufferStr(). Change those too.
Patch by Zhijie Hou, but further searching by me found significantly more
places that deserved the same treatment.
Author: Zhijie Hou, David Rowley
Discussion: https://postgr.es/m/cb172cf4361e4c7ba7167429070979d4@G08CNEXMBPEKD05.g08.fujitsu.local
Multiply before dividing, not the reverse, so that cases that should
produce exact results do produce exact results. (width_bucket_float8
got this right already.) Even when the result is inexact, this avoids
making it more inexact, since only the division step introduces any
imprecision.
While at it, fix compute_bucket() to not uselessly repeat the sign
check already done by its caller, and avoid duplicating the
multiply/divide steps by adjusting variable usage.
Per complaint from Martin Visser. Although this seems like a bug fix,
I'm hesitant to risk changing width_bucket()'s results in stable
branches, so no back-patch.
Discussion: https://postgr.es/m/6FA5117D-6AED-4656-8FEF-B74AC18FAD85@brytlyt.com
While the calculation is not well-defined if the bounds arguments are
infinite, there is a perfectly sane outcome if the test operand is
infinite: it's just like any other value that's before the first bucket
or after the last one. width_bucket_float8() got this right, but
I was too hasty about the case when adding infinities to numerics
(commit a57d312a7), so that width_bucket_numeric() just rejected it.
Fix that, and sync the relevant error message strings.
No back-patch needed, since infinities-in-numeric haven't shipped yet.
Discussion: https://postgr.es/m/2465409.1602170063@sss.pgh.pa.us
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats and call pg_stat_reset_replication_slot to reset the stats of
a particular slot. Users can pass NULL in pg_stat_reset_replication_slot
to reset stats of all the slots.
This commit extends the statistics collector to track this information
about slots.
Author: Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
The date-vs-timestamp, date-vs-timestamptz, and timestamp-vs-timestamptz
comparators all worked by promoting the first type to the second and
then doing a simple same-type comparison. This works fine, except
when the conversion result is out of range, in which case we throw an
entirely avoidable error. The sources of such failures are
(a) type date can represent dates much farther in the future than
the timestamp types can;
(b) timezone rotation might cause a just-in-range timestamp value to
become a just-out-of-range timestamptz value.
Up to now we just ignored these corner-case issues, but now we have
an actual user complaint (bug #16657 from Huss EL-Sheikh), so let's
do something about it.
It turns out that commit 52ad1e659 already built all the necessary
infrastructure to support error-free comparisons, but neglected to
actually use it in the main-line code paths. Fix that, do a little
bit of code style review, and remove the now-duplicate logic in
jsonpath_exec.c.
Back-patch to v13 where 52ad1e659 came in. We could take this back
further by back-patching said infrastructure, but given the small
number of complaints so far, I don't feel a great need to.
Discussion: https://postgr.es/m/16657-cde2f876d8cc7971@postgresql.org
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
Previously, a conversion such as
to_date('-44-02-01','YYYY-MM-DD')
would result in '0045-02-01 BC', as the code attempted to interpret
the negative year as BC, but failed to apply the correction needed
for our internal handling of BC years. Fix the off-by-one problem.
Also, arrange for the combination of a negative year and an
explicit "BC" marker to cancel out and produce AD. This is how
the negative-century case works, so it seems sane to do likewise.
Continue to read "year 0000" as 1 BC. Oracle would throw an error,
but we've accepted that case for a long time so I'm hesitant to
change it in a back-patch.
Per bug #16419 from Saeed Hubaishan. Back-patch to all supported
branches.
Dar Alathar-Yemen and Tom Lane
Discussion: https://postgr.es/m/16419-d8d9db0a7553f01b@postgresql.org
Previously we threw an error. But make_date already allowed the case,
so it is inconsistent as well as unhelpful for make_timestamp not to.
Both functions continue to reject year zero.
Code and test fixes by Peter Eisentraut, doc changes by me
Discussion: https://postgr.es/m/13c0992c-f15a-a0ca-d839-91d3efd965d9@2ndquadrant.com
The SQL standard doesn't require jsonpath .datetime() method to support the
ISO 8601 format. But our to_json[b]() functions convert timestamps to text in
the ISO 8601 format in the sake of compatibility with javascript. So, we add
support of the ISO 8601 to the jsonpath .datetime() in the sake compatibility
with to_json[b]().
The standard mode of datetime parsing currently supports just template patterns
and separators in the format string. In order to implement ISO 8601, we have to
add support of the format string double quotes to the standard parsing mode.
Discussion: https://postgr.es/m/94321be0-cc96-1a81-b6df-796f437f7c66%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Backpatch-through: 13
bffe1bd684 has introduced jsonpath .datetime() method, but default formats
for time and timestamp contain excess space between time and timezone. This
commit removes this excess space making behavior of .datetime() method
standard-compliant.
Discussion: https://postgr.es/m/94321be0-cc96-1a81-b6df-796f437f7c66%40postgrespro.ru
Author: Nikita Glukhov
Backpatch-through: 13
We have a dozen or so places that need to iterate over all but the
first cell of a List. Prior to v13 this was typically written as
for_each_cell(lc, lnext(list_head(list)))
Commit 1cff1b95a changed these to
for_each_cell(lc, list, list_second_cell(list))
This patch introduces a new macro for_each_from() which expresses
the start point as a list index, allowing these to be written as
for_each_from(lc, list, 1)
This is marginally more efficient, since ForEachState.i can be
initialized directly instead of backing into it from a ListCell
address. It also seems clearer and less typo-prone.
Some of the remaining uses of for_each_cell() look like they could
profitably be changed to for_each_from(), but here I confined myself
to changing uses of list_second_cell().
Also, fix for_each_cell_setup() and for_both_cell_setup() to
const-ify their arguments; that's a simple oversight in 1cff1b95a.
Back-patch into v13, on the grounds that (1) the const-ification
is a minor bug fix, and (2) it's better for back-patching purposes
if we only have two ways to write these loops rather than three.
In HEAD, also remove list_third_cell() and list_fourth_cell(),
which were also introduced in 1cff1b95a, and are unused as of
cc99baa43. It seems unlikely that any third-party code would
have started to use them already; anyone who has can be directed
to list_nth_cell instead.
Discussion: https://postgr.es/m/CAApHDvpo1zj9KhEpU2cCRZfSM3Q6XGdhzuAS2v79PH7WJBkYVA@mail.gmail.com
SQL operations such as CURRENT_DATE, CURRENT_TIME, LOCALTIME, and
conversion of "now" in a datetime input string have to obtain the
transaction start timestamp ("now()") as a broken-down struct pg_tm.
This is a remarkably expensive conversion, and since now() does not
change intra-transaction, it doesn't really need to be done more than
once per transaction. Introducing a simple cache provides visible
speedups in queries that compute these values many times, for example
insertion of many rows that use a default value of CURRENT_DATE.
Peter Smith, with a bit of kibitzing by me
Discussion: https://postgr.es/m/CAHut+Pu89TWjq530V2gY5O6SWi=OEJMQ_VHMt8bdZB_9JFna5A@mail.gmail.com
When commit bd3daddaf introduced AlternativeSubPlans, I had some
ambitions towards allowing the choice of subplan to change during
execution. That has not happened, or even been thought about, in the
ensuing twelve years; so it seems like a failed experiment. So let's
rip that out and resolve the choice of subplan at the end of planning
(in setrefs.c) rather than during executor startup. This has a number
of positive benefits:
* Removal of a few hundred lines of executor code, since
AlternativeSubPlans need no longer be supported there.
* Removal of executor-startup overhead (particularly, initialization
of subplans that won't be used).
* Removal of incidental costs of having a larger plan tree, such as
tree-scanning and copying costs in the plancache; not to mention
setrefs.c's own costs of processing the discarded subplans.
* EXPLAIN no longer has to print a weird (and undocumented)
representation of an AlternativeSubPlan choice; it sees only the
subplan actually used. This should mean less confusion for users.
* Since setrefs.c knows which subexpression of a plan node it's
working on at any instant, it's possible to adjust the estimated
number of executions of the subplan based on that. For example,
we should usually estimate more executions of a qual expression
than a targetlist expression. The implementation used here is
pretty simplistic, because we don't want to expend a lot of cycles
on the issue; but it's better than ignoring the point entirely,
as the executor had to.
That last point might possibly result in shifting the choice
between hashed and non-hashed EXISTS subplans in a few cases,
but in general this patch isn't meant to change planner choices.
Since we're doing the resolution so late, it's really impossible
to change any plan choices outside the AlternativeSubPlan itself.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/1992952.1592785225@sss.pgh.pa.us
Up to now, if you tried to omit "AS" before a column label in a SELECT
list, it would only work if the column label was an IDENT, that is not
any known keyword. This is rather unfriendly considering that we have
so many keywords and are constantly growing more. In the wake of commit
1ed6b8956 it's possible to improve matters quite a bit.
We'd originally tried to make this work by having some of the existing
keyword categories be allowed without AS, but that didn't work too well,
because each category contains a few special cases that don't work
without AS. Instead, invent an entirely orthogonal keyword property
"can be bare column label", and mark all keywords that way for which
we don't get shift/reduce errors by doing so.
It turns out that of our 450 current keywords, all but 39 can be made
bare column labels, improving the situation by over 90%. This number
might move around a little depending on future grammar work, but it's
a pretty nice improvement.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
This feature has been a thorn in our sides for a long time, causing
many grammatical ambiguity problems. It doesn't seem worth the
pain to continue to support it, so remove it.
There are some follow-on improvements we can make in the grammar,
but this commit only removes the bare minimum number of productions,
plus assorted backend support code.
Note that pg_dump and psql continue to have full support, since
they may be used against older servers. However, pg_dump warns
about postfix operators. There is also a check in pg_upgrade.
Documentation-wise, I (tgl) largely removed the "left unary"
terminology in favor of saying "prefix operator", which is
a more standard and IMO less confusing term.
I included a catversion bump, although no initial catalog data
changes here, to mark the boundary at which oprkind = 'r'
stopped being valid in pg_operator.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
In the particular case of GRANTED BY, this is specified in the SQL
standard. Since in PostgreSQL, CURRENT_ROLE is equivalent to
CURRENT_USER, and CURRENT_USER is already supported here, adding
CURRENT_ROLE is trivial. The other cases are PostgreSQL extensions,
but for the same reason it also makes sense there.
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Asif Rehman <asifr.rehman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/f2feac44-b4c5-f38f-3699-2851d6a76dc9%402ndquadrant.com
Introduced in 0aa8f7640.
MSVC warned about performing 32-bit bit shifting when it appeared like we
might like a 64-bit result. We did, but it just so happened that none of
the calls to this function could have caused the 32-bit shift to overflow.
Here we just cast the constant to int64 to make the compiler happy.
Discussion: https://postgr.es/m/CAApHDvofA_vsrpC13mq_hZyuye5B-ssKEaer04OouXYCO5-uXQ@mail.gmail.com
This essentially reverts a micro-optimization I made years ago,
as part of the much larger commit d72f6c750. It's doubtful
that there was any hard evidence for it being helpful even then,
and the case is even more dubious now that modern compilers
are so much smarter about inlining memset().
The proximate reason for undoing it is to get rid of the type punning
inherent in MemSet, for fear that that may cause problems now that
we're applying additional optimization switches to numeric.c.
At the very least this'll silence some warnings from a few old
buildfarm animals.
(It's probably past time for another look at whether MemSet is still
worth anything at all, but I do not propose to tackle that question
right now.)
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Experimentation shows that clang will auto-vectorize the critical
multiplication loop if the termination condition is written "i2 < limit"
rather than "i2 <= limit". This seems unbelievably stupid, but I've
reproduced it on both clang 9.0.1 (RHEL8) and 11.0.3 (macOS Catalina).
gcc doesn't care, so tweak the code to do it that way.
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Compile numeric.c with -ftree-vectorize where available, and adjust
the innermost loop of mul_var() so that it is amenable to being
auto-vectorized. (Mainly, that involves making it process the arrays
left-to-right not right-to-left.)
Applying -ftree-vectorize actually makes numeric.o smaller, at least
with my compiler (gcc 8.3.1 on x86_64), and it's a little faster too.
Independently of that, fixing the inner loop to be vectorizable also
makes things a bit faster. But doing both is a huge win for
multiplications with lots of digits. For me, the numeric regression
test is the same speed to within measurement noise, but numeric_big
is a full 45% faster.
We also looked into applying -funroll-loops, but that makes numeric.o
bloat quite a bit, and the additional speed improvement is very
marginal.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
This splits a string at occurrences of a delimiter. It is exactly like
string_to_array() except for producing a set of values instead of an
array of values. Thus, the relationship of these two functions is
the same as between regexp_split_to_table() and regexp_split_to_array().
Although the same results could be had from unnest(string_to_array()),
this is somewhat faster than that, and anyway it seems reasonable to
have it for symmetry with the regexp functions.
Pavel Stehule, reviewed by Peter Smith
Discussion: https://postgr.es/m/CAFj8pRD8HOpjq2TqeTBhSo_QkzjLOhXzGCpKJ4nCs7Y9SQkuPw@mail.gmail.com
Previously the codes for pg_backend_memory_contexts were in
src/backend/utils/mmgr/mcxt.c. This commit moves them to
src/backend/utils/adt/mcxtfuncs.c so that mcxt.c basically includes
only the low-level interface for memory contexts.
Author: Atsushi Torikoshi
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/20200819135545.GC19121@paquier.xyz
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
The new hlCover() algorithm that I introduced in commit c9b0c678d
turns out to potentially take O(N^2) or worse time on long documents,
if there are many occurrences of individual query words but few or no
substrings that actually satisfy the query. (One way to hit this
behavior is with a "common_word & rare_word" type of query.) This
seems unavoidable given the original goal of checking every substring
of the document, so we have to back off that idea. Fortunately, it
seems unlikely that anyone would really want headlines spanning all of
a long document, so we can avoid the worse-than-linear behavior by
imposing a maximum length of substring that we'll consider.
For now, just hard-wire that maximum length as a multiple of max_words
times max_fragments. Perhaps at some point somebody will argue for
exposing it as a ts_headline parameter, but I'm hesitant to make such
a feature addition in a back-patched bug fix.
I also noted that the hlFirstIndex() function I'd added in that
commit was unnecessarily stupid: it really only needs to check whether
a HeadlineWordEntry's item pointer is null or not. This wouldn't make
all that much difference in typical cases with queries having just
a few terms, but a cycle shaved is a cycle earned.
In addition, add a CHECK_FOR_INTERRUPTS call in TS_execute_recurse.
This ensures that hlCover's loop is cancellable if it manages to take
a long time, and it may protect some other TS_execute callers as well.
Back-patch to 9.6 as the previous commit was. I also chose to add the
CHECK_FOR_INTERRUPTS call to 9.5. The old hlCover() algorithm seems
to avoid the O(N^2) behavior, at least on the test case I tried, but
nonetheless it's not very quick on a long document.
Per report from Stephen Frost.
Discussion: https://postgr.es/m/20200724160535.GW12375@tamriel.snowman.net
Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
The initial implementation of leader_pid in pg_stat_activity added by
b025f32 took the approach to strictly print what a PGPROC entry
includes. In short, if a backend has been involved in parallel query at
least once, leader_pid would remain set as long as the backend is alive.
For a parallel group leader, this means that the field would always be
set after it participated at least once in parallel query, and after
more discussions this could be confusing if using for example a
connection pooler.
This commit changes the data printed so as leader_pid becomes always
NULL for a parallel group leader, showing up a non-NULL value only for
the parallel workers, and actually as long as a parallel query is
running as workers are shut down once the query has completed.
This does not change the definition of any catalog, so no catalog bump
is needed. Per discussion with Justin Pryzby, Álvaro Herrera, Julien
Rouhaud and me.
Discussion: https://postgr.es/m/20200721035145.GB17300@paquier.xyz
Backpatch-through: 13
It's fairly silly that ignoring NOT subexpressions is TS_execute's
default behavior. It's wrong on its face and it encourages errors
of omission. Moreover, the only two remaining callers that aren't
specifying CALC_NOT are in ts_headline calculations, and it's very
arguable that those are bugs: if you've specified "!foo" in your
query, why would you want to get a headline that includes "foo"?
Hence, rip that out and change the default behavior to be to calculate
NOT accurately. As a concession to the slim chance that there is still
somebody somewhere who needs the incorrect behavior, provide a new
SKIP_NOT flag to explicitly request that.
Back-patch into v13, mainly because it seems better to change this
at the same time as the previous commit's rejiggering of TS_execute
related APIs. Any outside callers affected by this change are
probably also affected by that one.
Discussion: https://postgr.es/m/CALT9ZEE-aLotzBg-pOp2GFTesGWVYzXA3=mZKzRDa_OKnLF7Mg@mail.gmail.com
Text search sometimes failed to find valid matches, for instance
'!crew:A'::tsquery might fail to locate 'crew:1B'::tsvector during
an index search. The root of the issue is that TS_execute's callback
functions were not changed to use ternary (yes/no/maybe) reporting
when we made the search logic itself do so. It's somewhat annoying
to break that API, but on the other hand we now see that any code
using plain boolean logic is almost certainly broken since the
addition of phrase search. There seem to be very few outside callers
of this code anyway, so we'll just break them intentionally to get
them to adapt.
This allows removal of tsginidx.c's private re-implementation of
TS_execute, since that's now entirely duplicative. It's also no
longer necessary to avoid use of CALC_NOT in tsgistidx.c, since
the underlying callbacks can now do something reasonable.
Back-patch into v13. We can't change this in stable branches,
but it seems not quite too late to fix it in v13.
Tom Lane and Pavel Borisov
Discussion: https://postgr.es/m/CALT9ZEE-aLotzBg-pOp2GFTesGWVYzXA3=mZKzRDa_OKnLF7Mg@mail.gmail.com
Add infinities that behave the same as they do in the floating-point
data types. Aside from any intrinsic usefulness these may have,
this closes an important gap in our ability to convert floating
values to numeric and/or replace float-based APIs with numeric.
The new values are represented by bit patterns that were formerly
not used (although old code probably would take them for NaNs).
So there shouldn't be any pg_upgrade hazard.
Patch by me, reviewed by Dean Rasheed and Andrew Gierth
Discussion: https://postgr.es/m/606717.1591924582@sss.pgh.pa.us
Since commit 044c99bc5, eqjoinsel passes the passed-in collation
to any operators it invokes. However, neqjoinsel failed to pass
on whatever collation it got, so that if we invoked a
collation-dependent operator via that code path, we'd get "could not
determine which collation to use for string comparison" or the like.
Per report from Justin Pryzby. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20200721191606.GL5748@telsasoft.com
Rather than always insisting on an exact match of the type OID in the
data to the element type or column type we expect, complain only when
both OIDs fall within the manually-assigned range. This acknowledges
the reality that user-defined types don't have stable OIDs, while
still preserving some of the mistake-detection value of the old test.
(It's not entirely clear whether to error if one OID is manually
assigned and the other isn't. But perhaps that case could arise in
cross-version cases where a former extension type has been imported
into core, so I let it pass.)
This change allows us to remove the prohibition on binary transfer
of user-defined arrays and composites in the recently-landed support
for binary logical replication (commit 9de77b545). We can just
unconditionally drop that check, since if the client has asked for
binary transfer it must be >= v14 and must have this change.
Discussion: https://postgr.es/m/CADK3HH+R3xMn=8t3Ct+uD+qJ1KD=Hbif5NFMJ+d5DkoCzp6Vgw@mail.gmail.com
Many situations where the offset is infinity were not handled sanely.
We should generally allow the val versus base +/- offset comparison to
proceed according to the normal rules of IEEE arithmetic; however, we
must do something special for the corner cases where base +/- offset
would produce NaN due to subtracting two like-signed infinities.
That corresponds to asking which values infinitely precede +inf or
infinitely follow -inf, which should certainly be true of any finite
value or of the opposite-signed infinity. After some discussion it
seems that the best decision is to make it true of the same-signed
infinity as well, ie, just return constant TRUE if the calculation
would produce a NaN.
(We could write this with a bit less code by subtracting anyway,
and then checking for a NaN result. However, I prefer this
formulation because it'll be easier to transpose into numeric.c.)
Although this seems like clearly a bug fix with respect to finite
values, it is less obviously correct for infinite values. Between
that and the fact that the whole issue only arises for very strange
window specifications (e.g. RANGE BETWEEN 'inf' PRECEDING AND 'inf'
PRECEDING), I'll desist from back-patching.
Noted by Dean Rasheed.
Discussion: https://postgr.es/m/3393130.1594925893@sss.pgh.pa.us
When using the following functions, users could see various types of
errors of the type "cache lookup failed for OID XXX" with elog(), that
can only be used for internal errors:
* pg_describe_object()
* pg_identify_object()
* pg_identify_object_as_address()
The set of APIs managing object addresses for all object types are made
smarter by gaining a new argument "missing_ok" that allows any caller to
control if an error is raised or not on an undefined object. The SQL
functions listed above are changed to handle the case where an object is
missing.
Regression tests are added for all object types for the cases where
these are undefined. Before this commit, these cases failed with cache
lookup errors, and now they basically return NULL (minus the name of the
object type requested).
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
SQL standard doesn't define numeric Inf or NaN values. It appears even more
ridiculous to support then in jsonpath assuming JSON doesn't support these
values as well. This commit forbids returning NaN from .double(), which was
previously allowed. NaN can't be result of inner-jsonpath computation over
non-NaNs. So, we can not expect NaN in the jsonpath output.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/203949.1591879542%40sss.pgh.pa.us
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
When jsonpath .double() method detects that numeric or string can't be
converted to double precision, it throws an error. This commit makes these
errors explicitly express the reason of failure.
Discussion: https://postgr.es/m/CAPpHfdtqJtiSXkP7tOXez18NxhLUH_-75bL8%3DOce4Ki%2Bbv7V6Q%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
Due to not having our signals straight about CRLF vs. LF line
termination, the output of pg_current_logfile() included a trailing
\r on Windows. To fix, force the file descriptor it uses into text
mode.
While here, move a couple of local variable declarations to make
the function's logic clearer.
In v12 and v13, also back-patch the test added by 1c4e88e2f so that
this function has some test coverage. However, the 004_logrotate.pl
test script doesn't exist before v12, and it didn't seem worth adding
to older branches just for this.
Per report from Thomas Kellerer. Back-patch to v10 where this
function was added.
Discussion: https://postgr.es/m/412ae8da-76bb-640f-039a-f3513499e53d@gmx.net
Commit f7f70d5e2 left one inconsistency behind: we're still creating
pg_type entries for the composite types of sequences and toast tables,
but not arrays over those composites. But there seems precious little
reason to have named composite types for toast tables, and not much more
to have them for sequences (especially given the thought that sequences
may someday not be standalone relations at all).
So, let's close that inconsistency by removing these composite types,
rather than adding arrays for them. This buys back a little bit of
the initial pg_type bloat added by the previous patch, and could be
a significant savings in a large database with many toast tables.
Aside from a small logic rearrangement in heap_create_with_catalog,
this patch mostly needs to clean up some places that were assuming that
pg_class.reltype always has a valid value. Those are really pre-existing
bugs, given that it's documented otherwise; notably, the plpgsql changes
fix code that gives "cache lookup failed for type 0" on indexes today.
But none of these seem interesting enough to back-patch.
Also, remove the pg_dump/pg_upgrade infrastructure for propagating
a toast table's pg_type OID into the new database, since we no longer
need that.
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
This introduces a new set of extended routines for procedure and
operator name lookups, with a flag bitmask argument that can modify the
result. The following options are available:
- Force schema qualification, ignoring search_path. This is similar to
the existing option for format_{operator|procedure}_qualified().
- Force NULL as result instead of a numeric OID for an undefined
object. This option is new.
This is a refactoring similar to 1185c78, that will be used for a future
patch to improve the SQL functions providing information using object
addresses for undefined objects.
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
If a type scanned is undefined, type format routines have two behaviors
depending on if FORMAT_TYPE_ALLOW_INVALID is used by the caller or not:
- Issue a cache lookup error
- Return an undefined type name "???", "???[]" or "-"
The current interface is not really helpful for callers willing to
format properly a type name, but still make sure that the type is
defined as there could be types matching the strings generated when
looking for an undefined type, even if that should not be a problem in
practice. In order to counter that, add a new flag called
FORMAT_TYPE_INVALID_AS_NULL that returns a NULL result instead of "???
or "-" which does not generate an error. This flag will be used in a
follow-up patch improving the set of SQL functions showing information
for object addresses when it comes to undefined objects.
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
The cfbot and some BF animals are complaining about the previous
read_binary_file commit because of ignoring return value of ‘fread’.
So let's make everyone happy by testing the return value even though
not strictly needed.
Reported by Justin Pryzby, and suggested patch by Tom Lane. Backpatched
to v11 same as the previous commit.
Reported-By: Justin Pryzby
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
read_binary_file(), used by SQL functions pg_read_file() and friends,
uses stat to determine file length to read, when not passed an explicit
length as an argument. This is problematic, for example, if the file
being read is a virtual file with a stat-reported length of zero.
Arrange to read until EOF, or StringInfo data string lenth limit, is
reached instead.
Original complaint and patch by me, with significant review, corrections,
advice, and code optimizations by Tom Lane. Backpatched to v11. Prior to
that only paths relative to the data and log dirs were allowed for files,
so no "zero length" files were reachable anyway.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
Commit 54cd4f045 added some kluges to work around an old glibc bug,
namely that %.*s could misbehave if glibc thought any characters in
the supplied string were incorrectly encoded. Now that we use our
own snprintf.c implementation, we need not worry about that bug (even
if it still exists in the wild). Revert a couple of particularly
ugly hacks, and remove or improve assorted comments.
Note that there can still be encoding-related hazards here: blindly
clipping at a fixed length risks producing wrongly-encoded output
if the clip splits a multibyte character. However, code that's
doing correct multibyte-aware clipping doesn't really need a comment
about that, while code that isn't needs an explanation why not,
rather than a red-herring comment about an obsolete bug.
Discussion: https://postgr.es/m/279428.1593373684@sss.pgh.pa.us
Since %c only passes a C "char" to printf, it's incapable of dealing
with multibyte characters. Passing just the first byte of such a
character leads to an output string that is visibly not correctly
encoded, resulting in undesirable behavior such as encoding conversion
failures while sending error messages to clients.
We've lived with this issue for a long time because it was inconvenient
to avoid in a portable fashion. However, now that we always use our own
snprintf code, it's reasonable to use the %.*s format to print just one
possibly-multibyte character in a string. (We previously avoided that
obvious-looking answer in order to work around glibc's bug #6530, cf
commits 54cd4f045 and ed437e2b2.)
Hence, run around and fix a bunch of places that used %c to report
a character found in a user-supplied string. For simplicity, I did
not touch places that were emitting non-user-facing debug messages,
or reporting catalog data that should always be ASCII. (It's also
unclear how useful this approach could be in frontend code, where
it's less certain that we know what encoding we're dealing with.)
In passing, improve a couple of poorly-written error messages in
pageinspect/heapfuncs.c.
This is a longstanding issue, but I'm hesitant to back-patch because
of the impact on translatable message strings. In any case this fix
would not work reliably before v12.
Tom Lane and Quan Zongliang
Discussion: https://postgr.es/m/a120087c-4c88-d9d4-1ec5-808d7a7f133d@gmail.com
I failed to notice that we don't really need to check for y being an
integer in the code path where x = -inf; we already did.
Also make some further cosmetic rearrangements in that spot in hopes
of dodging the seeming compiler bug that buildfarm member fossa is
hitting. And be consistent about declaring variables as "float8"
not "double", since the pre-existing variables in this function are
like that.
Discussion: https://postgr.es/m/E1jkyFX-0005RR-1Q@gemulon.postgresql.org
Buildfarm results for commit e532b1d57 reveal the error in my thinking
about the unexpected-EDOM case. I'd supposed this was no longer really
a live issue, but it seems the fix for glibc's bug #3866 is not all that
old, and we still have at least one buildfarm animal (lapwing) with the
bug. Hence, resurrect essentially the previous logic (but, I hope, less
opaquely presented), and explain what it is we're really doing here.
Also, blindly try to fix fossa's failure by tweaking the logic that
figures out whether y is an odd integer when x is -inf. This smells
a whole lot like a compiler bug, but I lack access to icc to try to
pin it down. Maybe doing division instead of multiplication will
dodge the issue.
Discussion: https://postgr.es/m/E1jkU7H-00024V-NZ@gemulon.postgresql.org
Buildfarm results for commit decbe2bfb show that AIX and illumos
have non-POSIX-compliant pow() functions, as do ancient NetBSD
and HPUX releases. While it's dubious how much we should care
about the latter two platforms, the former two are probably enough
reason to put in manual handling of infinite-input cases. Hence,
do so, and clean up the post-pow() error handling to reflect its
now-more-limited scope. (Notably, while we no longer expect to
ever see EDOM from pow(), report it as a domain error if we do.
The former coding had the net effect of expensively converting the
error to ERANGE, which seems highly questionable: if pow() wanted
to report ERANGE, it would have done so.)
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/E1jkU7H-00024V-NZ@gemulon.postgresql.org
Previously, these functions tended to throw underflow errors for
negative-infinity exponents. The correct thing per POSIX is to
return 0, so let's do that instead. (Note that the SQL standard
is silent on such issues, as it lacks the concepts of either Inf
or NaN; so our practice is to follow POSIX whenever a corresponding
C-library function exists.)
Also, add a bunch of test cases verifying that exp() and power()
actually do follow POSIX for Inf and NaN inputs. While this patch
should guarantee that exp() passes the tests, power() will not unless
the platform's pow(3) is fully POSIX-compliant. I already know that
gaur fails some of the tests, and I am suspicious that the Windows
animals will too; the extent of compliance of other old platforms
remains to be seen. We might choose to drop failing test cases, or
to work harder at overriding pow(3) for these cases, but first let's
see just how good or bad the situation is.
Discussion: https://postgr.es/m/582552.1591917752@sss.pgh.pa.us
var_samp(numeric) and stddev_samp(numeric) disagreed with their float
cousins about what to do for a single non-null input value that is NaN.
The float versions return NULL on the grounds that the calculation is
only defined for more than one non-null input, which seems like the
right answer. But the numeric versions returned NaN, as a result of
dealing with edge cases in the wrong order. Fix that. The patch
also gets rid of an insignificant memory leak in such cases.
This inconsistency is of long standing, but on the whole it seems best
not to back-patch the change into stable branches; nobody's complained
and it's such an obscure point that nobody's likely to complain.
(Note that v13 and v12 now contain test cases that will notice if we
accidentally back-patch this behavior change in future.)
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
When there is just one non-null input value, and it is infinity or NaN,
aggregates such as stddev_pop and covar_pop should produce a NaN
result, because the calculation is not well-defined. They used to do
so, but since we adopted Youngs-Cramer aggregation in commit e954a727f,
they produced zero instead. That's an oversight, so fix it. Add tests
exercising these edge cases.
Affected aggregates are
var_pop(double precision)
stddev_pop(double precision)
var_pop(real)
stddev_pop(real)
regr_sxx(double precision,double precision)
regr_syy(double precision,double precision)
regr_sxy(double precision,double precision)
regr_r2(double precision,double precision)
regr_slope(double precision,double precision)
regr_intercept(double precision,double precision)
covar_pop(double precision,double precision)
corr(double precision,double precision)
Back-patch to v12 where the behavior change was accidentally introduced.
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
Core by no means makes excessive use of these functions, but quite a large
number of those usages do require the caller to call strlen() on the
returned string. This is quite wasteful since these functions do already
have a good idea of the length of the string, so we might as well just
have them return that.
Reviewed-by: Andrew Gierth
Discussion: https://postgr.es/m/CAApHDvrm2A5x2uHYxsqriO2cUaGcFvND%2BksC9e7Tjep0t2RK_A%40mail.gmail.com
In passing, also remove a few surplus empty lines from pg_ltoa and
pg_ulltoa_n in numutils.c
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87y2ou3xuh.fsf@news-spur.riddles.org.uk
Backpatch-through: 13, where these changes were introduced
When merging two NumericAggStates, the code missed adding the new
state's NaNcount unless its N was also nonzero; since those counts
are independent, this is wrong.
This would only have visible effect if some partial aggregate scans
found only NaNs while earlier ones found only non-NaNs; then we could
end up falsely deciding that there were no NaNs and fail to return a
NaN final result as expected. That's pretty improbable, so it's no
surprise this hasn't been reported from the field. Still, it's a bug.
I didn't try to produce a regression test that would show the bug,
but I did notice that these functions weren't being reached at all
in our regression tests, so I improved the tests to at least
exercise them. With these additions, I see pretty complete code
coverage on the aggregation-related functions in numeric.c.
Back-patch to 9.6 where this code was introduced. (I only added
the improved test case as far back as v10, though, since the
relevant part of aggregates.sql isn't there at all in 9.6.)
ineq_histogram_selectivity() can be invoked in situations where the
ordering we care about is not that of the column's histogram. We could
be considering some other collation, or even more drastically, the
query operator might not agree at all with what was used to construct
the histogram. (We'll get here for anything using scalarineqsel-based
estimators, so that's quite likely to happen for extension operators.)
Up to now we just ignored this issue and assumed we were dealing with
an operator/collation whose sort order exactly matches the histogram,
possibly resulting in junk estimates if the binary search gets confused.
It's past time to improve that, since the use of nondefault collations
is increasing. What we can do is verify that the given operator and
collation match what's recorded in pg_statistic, and use the existing
code only if so. When they don't match, instead execute the operator
against each histogram entry, and take the fraction of successes as our
selectivity estimate. This gives an estimate that is probably good to
about 1/histogram_size, with no assumptions about ordering. (The quality
of the estimate is likely to degrade near the ends of the value range,
since the two orderings probably don't agree on what is an extremal value;
but this is surely going to be more reliable than what we did before.)
At some point we might further improve matters by storing more than one
histogram calculated according to different orderings. But this code
would still be good fallback logic when no matches exist, so that is
not an argument for not doing this.
While here, also improve get_variable_range() to deal more honestly
with non-default collations.
This isn't back-patchable, because it requires adding another argument
to ineq_histogram_selectivity, and because it might have significant
impact on the estimation results for extension operators relying on
scalarineqsel --- mostly for the better, one hopes, but in any case
destabilizing plan choices in back branches is best avoided.
Per investigation of a report from James Lucas.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
It's intentional that we don't allow values greater than 24 hours,
while we do allow "24:00:00" as well as "23:59:60" as inputs.
However, the range check was miscoded in such a way that it would
accept "23:59:60.nnn" with a nonzero fraction. For time or timetz,
the stored result would then be greater than "24:00:00" which would
fail dump/reload, not to mention possibly confusing other operations.
Fix by explicitly calculating the result and making sure it does not
exceed 24 hours. (This calculation is redundant with what will happen
later in tm2time or tm2timetz. Maybe someday somebody will find that
annoying enough to justify refactoring to avoid the duplication; but
that seems too invasive for a back-patched bug fix, and the cost is
probably unmeasurable anyway.)
Note that this change also rejects such input as the time portion
of a timestamp(tz) value.
Back-patch to v10. The bug is far older, but to change this pre-v10
we'd need to ensure that the logic behaves sanely with float timestamps,
which is possibly nontrivial due to roundoff considerations.
Doesn't really seem worth troubling with.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/20200520125807.GB296739@msg.df7cb.de
This issue has been present since the introduction of this code as of
a3519a2 from 2002, and has been found by buildfarm member prion that
uses RELCACHE_FORCE_RELEASE via the tests introduced recently in
e786be5.
Discussion: https://postgr.es/m/20200601022055.GB4121@paquier.xyz
Backpatch-through: 9.5
A relation that has no storage initializes rd_tableam to NULL, which
caused those two functions to crash because of a pointer dereference.
Note that in 11 and older versions, this has always failed with a
confusing error "could not open file".
These two functions are used by the Postgres ODBC driver, which requires
them only when connecting to a backend strictly older than 8.1. When
connected to 8.2 or a newer version, the driver uses a RETURNING clause
instead whose support has been added in 8.2, so it should be possible to
just remove both functions in the future. This is left as an issue to
address later.
While on it, add more regression tests for those functions as we never
really had coverage for them, and for aggregates of TIDs.
Reported-by: Jaime Casanova, via sqlsmith
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAJGNTeO93u-5APMga6WH41eTZ3Uee9f3s8dCpA-GSSqNs1b=Ug@mail.gmail.com
Backpatch-through: 12
The repeat() function loops for potentially a long time without
ever checking for interrupts. This prevents, for example, a query
cancel from interrupting until the work is all done. Fix by
inserting a CHECK_FOR_INTERRUPTS() into the loop.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/flat/8692553c-7fe8-17d9-cbc1-7cddb758f4c6%40joeconway.com
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
It's just weird that this name wasn't chosen to look like an
identifier. The suspicion that it wasn't thought about too
hard is reinforced by the fact that it wasn't documented in
the pg_locks view (until I did so, a day or two back).
Update, and add a comment reminding future adjusters of this
array to fix the docs too.
Do some desultory wordsmithing on various entries in the wait
events tables.
Discussion: https://postgr.es/m/24595.1589326879@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Visual Studio 2015 and later versions should still be able to do the same
as Visual Studio 2012, but the declaration of locale_name is missing in
_locale_t, causing the code compilation to fail, hence this falls back
instead on to enumerating all system locales by using EnumSystemLocalesEx
to find the required locale name. If the input argument is in Unix-style
then we can get ISO Locale name directly by using GetLocaleInfoEx() with
LCType as LOCALE_SNAME.
In passing, change the documentation references of the now obsolete links.
Note that this problem occurs only with NLS enabled builds.
Author: Juan José Santamaría Flecha, Davinder Singh and Amit Kapila
Reviewed-by: Ranier Vilela and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAHzhFSFoJEWezR96um4-rg5W6m2Rj9Ud2CNZvV4NWc9tXV7aXQ@mail.gmail.com
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Instead of re-identifying which statistics bucket to use for a given
SLRU on every counter increment, do it once during shmem initialization.
This saves a fair number of cycles, and there's no real cost because
we could not have a bucket assignment that varies over time or across
backends anyway.
Also, get rid of the ill-considered decision to let pgstat.c pry
directly into SLRU's shared state; it's cleaner just to have slru.c
pass the stats bucket number.
In consequence of these changes, there's no longer any need to store
an SLRU's LWLock tranche info in shared memory, so get rid of that,
making this a net reduction in shmem consumption. (That partly
reverts fe702a7b3.)
This is basically code review for 28cac71bd, so I also cleaned up
some comments, removed a dangling extern declaration, fixed some
things that should be static and/or const, etc.
Discussion: https://postgr.es/m/3618.1589313035@sss.pgh.pa.us
This commit changes pg_stat_get_slru() so that it uses
TimestampTzGetDatum() for stats_reset field because that field
stores the timestamp with time zone value. Previously
Int64GetDatum() was used.
Author: Fujii Masao
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/b8784fe6-1401-ab35-aa14-d57b5bb8e312@oss.nttdata.com
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
checkcondition_str() failed to report multiple matches for a prefix
pattern correctly: it would dutifully merge the match positions, but
then after exiting that loop, if the last prefix-matching word had
had no suitable positions, it would report there were no matches.
The upshot would be failing to recognize a match that the query
should match.
It looks like you need all of these conditions to see the bug:
* a phrase search (else we don't ask for match position details)
* a prefix search item (else we don't get to this code)
* a weight restriction (else checkclass_str won't fail)
Noted while investigating a problem report from Pavel Borisov,
though this is distinct from the issue he was on about.
Back-patch to 9.6 where phrase search was added.
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
Queries such as '!(foo<->bar)' failed to find matching rows when
implemented as a GiST or GIN index search. That's because of
failing to handle phrase searches as tri-valued when considering
a query without any position information for the target tsvector.
We can only say that the phrase operator might match, not that it
does match; and therefore its NOT also might match. The previous
coding incorrectly inverted the approximate phrase result to
decide that there was certainly no match.
To fix, we need to make TS_phrase_execute return a real ternary result,
and then bubble that up accurately in TS_execute. As long as we have
to do that anyway, we can simplify the baroque things TS_phrase_execute
was doing internally to manage tri-valued searching with only a bool
as explicit result.
For now, I left the externally-visible result of TS_execute as a plain
bool. There do not appear to be any outside callers that need to
distinguish a three-way result, given that they passed in a flag
saying what to do in the absence of position data. This might need
to change someday, but we wouldn't want to back-patch such a change.
Although tsginidx.c has its own TS_execute_ternary implementation for
use at upper index levels, that sadly managed to get this case wrong
as well :-(. Fixing it is a lot easier fortunately.
Per bug #16388 from Charles Offenbacher. Back-patch to 9.6 where
phrase search was introduced.
Discussion: https://postgr.es/m/16388-98cffba38d0b7e6e@postgresql.org
In the footsteps of aaf069aa3, remove ACLDEBUG, which was the only
other remaining undocumented symbol in pg_config_manual.h. The fact
that nobody had bothered to document it in seventeen years is a good
clue to its usefulness. In practice, none of the tracing logic it
enabled would be of any value without additional effort.
Discussion: https://postgr.es/m/6631.1587565046@sss.pgh.pa.us
Working on commit 1c455078b led me to check through FunctionCallInvoke
call sites to see if every one was being honest about (a) making sure
that fcinfo.isnull is initially false, and (b) checking its state after
the call. Sure enough, I found some violations.
The main one is that finalize_partialaggregate re-used serialfn_fcinfo
without resetting isnull, even though it clearly intends to cater for
serialfns that return NULL. There would only be an issue with a
non-strict serialfn, since it's unlikely that a serialfn would return
NULL for non-null input. We have no non-strict serialfns in core, and
there may be none in the wild either, which would account for the lack
of complaints. Still, it's clearly wrong, so back-patch that fix to
9.6 where finalize_partialaggregate was introduced.
Also, arrayfuncs.c and rowtypes.c contained various callers that were
not bothering to check for result nulls. While what's being called is
a comparison or hash function that probably *shouldn't* return null,
that's a lousy excuse for not having any check at all. There are
existing places that just Assert(!fcinfo->isnull) in comparable
situations, so I added that to the places that were calling btree
comparison or hash support functions. In the places calling
boolean-returning equality functions, it's quite cheap to have them
treat isnull as FALSE, so make those places do that. Also remove some
"locfcinfo->isnull = false" assignments that are unnecessary given the
assumption that no previous call returned null. These changes seem like
mostly neatnik-ism or debugging support, so I didn't back-patch.
Although selfuncs.c will never call a target operator with null inputs,
some functions might return null anyway. The existing coding will fail
if that happens (since FunctionCall2Coll will punt), which seems
undesirable given that matchingsel() has such a broad range of potential
applicability --- in fact, we already have a problem because we apply it
to jsonb_path_exists_opr, which can return null. Hence, rejigger the
underlying functions mcv_selectivity and histogram_selectivity to cope,
treating a null result as false.
While we are at it, we can move the InitFunctionCallInfoData overhead
out of the inner loops, which isn't a huge number of cycles but might
save something considering we are likely calling functions as cheap
as int4eq(). Plus, the number of loop cycles to be expected is much
more than it was when this code was written, since typical settings
of default_statistics_target are higher.
In view of that consideration, let's apply the same change to
var_eq_const, eqjoinsel_inner, and eqjoinsel_semi. We do not expect
equality functions to ever return null for non-null inputs (and
certainly that code has been that way a long time without complaints),
but the cycle savings seem attractive, especially in the eqjoinsel loops
where there's potentially an O(N^2) savings.
Similar code exists in ineq_histogram_selectivity and
get_variable_range, but I forebore from changing those for now.
The performance argument for changing ineq_histogram_selectivity
is really weak anyway, since that will only iterate log2(N) times.
Nikita Glukhov and Tom Lane
Discussion: https://postgr.es/m/9d3b0959-95d6-c37e-2c0b-287bcfe5c705@postgrespro.ru
The views pg_stat_progress_* had not gotten the memo that
pg_read_all_stats is supposed to be able to read all statistics. Also
make a pass over all text-returning pg_stat_xyz functions that could
return "insufficient privilege" and make sure they also respect
pg_read_all_status.
Reported-by: Andrey M. Borodin
Reviewed-by: Andrey M. Borodin, Kyotaro Horiguchi
Discussion: https://postgr.es/m/13145F2F-8458-4977-9D2D-7B2E862E5722@yandex-team.ru
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
2nd pass of modifying various places which obtain the next power
of 2 of a number and make them use the new functions added in
f0705bb62.
In passing, also modify num_combinations(). This can be implemented
using simple bitshifting rather than looping.
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
Our documentation describes four allowed input syntaxes for circles,
but the regression tests tried only three ... with predictable
consequences. Remarkably, this has been wrong since the circle
datatype was added in 1997, but nobody noticed till now.
David Zhang, with some help from me
Discussion: https://postgr.es/m/332c47fa-d951-7574-b5cc-a8f7f7201202@highgo.ca
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
WITH TIES is an option to the FETCH FIRST N ROWS clause (the SQL
standard's spelling of LIMIT), where you additionally get rows that
compare equal to the last of those N rows by the columns in the
mandatory ORDER BY clause.
There was a proposal by Andrew Gierth to implement this functionality in
a more powerful way that would yield more features, but the other patch
had not been finished at this time, so we decided to use this one for
now in the spirit of incremental development.
Author: Surafel Temesgen <surafel3000@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/CALAY4q9ky7rD_A4vf=FVQvCGngm3LOes-ky0J6euMrg=_Se+ag@mail.gmail.com
Discussion: https://postgr.es/m/87o8wvz253.fsf@news-spur.riddles.org.uk
Since the existing bit number argument can't exceed INT32_MAX, it's
not possible for these functions to manipulate bits beyond the first
256MB of a bytea value. Lift that restriction by redeclaring the
bit number arguments as int8 (which requires a catversion bump,
hence is not back-patchable).
The similarly-named functions for bit/varbit don't really have a
problem because we restrict those types to at most VARBITMAXLEN bits;
hence leave them alone.
While here, extend the encode/decode functions in utils/adt/encode.c
to allow dealing with values wider than 1GB. This is not a live bug
or restriction in current usage, because no input could be more than
1GB, and since none of the encoders can expand a string more than 4X,
the result size couldn't overflow uint32. But it might be desirable
to support more in future, so make the input length values size_t
and the potential-output-length values uint64.
Also add some test cases to improve the miserable code coverage
of these functions.
Movead Li, editorialized some by me; also reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/20200312115135445367128@highgo.ca
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Similar to xid, but 64 bits wide. This new type is suitable for use in
various system views and administration functions.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
This adds SQL expressions NORMALIZE() and IS NORMALIZED to convert and
check Unicode normal forms, per SQL standard.
To support fast IS NORMALIZED tests, we pull in a new data file
DerivedNormalizationProps.txt from Unicode and build a lookup table
from that, using techniques similar to ones already used for other
Unicode data. make update-unicode will keep it up to date. We only
build and use these tables for the NFC and NFKC forms, because they
are too big for NFD and NFKD and the improvement is not significant
enough there.
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/c1909f27-c269-2ed9-12f8-3ab72c8caf7a@2ndquadrant.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
Buildfarm experience shows that this function can fail with ENOENT
if some other process unlinks a file between when we read the directory
entry and when we try to stat() it. The problem is old but we had
not noticed it until 085b6b667 added regression test coverage.
To fix, just ignore ENOENT failures. There is one other case that
this might hide: a symlink that points to nowhere. That seems okay
though, at least better than erroring.
Back-patch to v10 where this function was added, since the regression
test cases were too.
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
Instead of using Newton's method to compute numeric square roots, use
the Karatsuba square root algorithm, which performs better for numbers
of all sizes. In practice, this is 3-5 times faster for inputs with
just a few digits and up to around 10 times faster for larger inputs.
Also, the new algorithm guarantees that the final digit of the result
is correctly rounded, since it computes an integer square root with
truncation, containing at least 1 extra decimal digit before rounding.
The former algorithm would occasionally round the wrong way because
it rounded both the intermediate and final results.
In addition, arrange for sqrt_var() to explicitly support negative
rscale values (rounding before the decimal point). This allows the
argument reduction phase of ln_var() to be optimised for large inputs,
since it only needs to compute square roots with a few more digits
than the final ln() result, rather than computing all the digits
before the decimal point. For very large inputs, this can be many
thousands of times faster.
In passing, optimise div_var_fast() in a couple of places where it was
doing unnecessary work.
Patch be me, reviewed by Tom Lane and Tels.
Discussion: https://postgr.es/m/CAEZATCV1A7+jD3P30Zu31KjaxeSEyOn3v9d6tYegpxcq3cQu-g@mail.gmail.com
Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
This reverts the parts of commit 17a28b0364
that changed ereport's auxiliary functions from returning dummy integer
values to returning void. It turns out that a minority of compilers
complain (not entirely unreasonably) about constructs such as
(condition) ? errdetail(...) : 0
if errdetail() returns void rather than int. We could update those
call sites to say "(void) 0" perhaps, but the expectation for this
patch set was that ereport callers would not have to change anything.
And this aspect of the patch set was already the most invasive and
least compelling part of it, so let's just drop it.
Per buildfarm.
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Remove the documented restriction that collation providers must either
return NULL for all collations or non-NULL for all collations.
Use NULL for glibc collations like "C.UTF-8", which might otherwise lead
future proposed commits to force unnecessary index rebuilds.
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CA%2BhUKGJvqup3s%2BJowVTcacZADO6dOhfdBmvOPHLS3KXUJu41Jw%40mail.gmail.com
Change all the auxiliary error-reporting routines to return void,
now that we no longer need to pretend they are passing something
useful to errfinish(). While this probably doesn't save anything
significant at the machine-code level, it allows detection of some
additional types of mistakes.
Pass the error location details (__FILE__, __LINE__, PG_FUNCNAME_MACRO)
to errfinish not errstart. This shaves a few cycles off the case where
errstart decides we're not going to emit anything.
Re-implement elog() as a trivial wrapper around ereport(), removing
the separate support infrastructure it used to have. Aside from
getting rid of some now-surplus code, this means that elog() now
really does have exactly the same semantics as ereport(), in particular
that it can skip evaluation work if the message is not to be emitted.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
All errors of SQLSTATE class 23 should include the name of an object
associated with the error in separate fields of the error report message.
We do this so that applications need not try to extract them from the
possibly-localized human-readable text of the message.
Reported-by: Chris Bandy
Author: Chris Bandy
Reviewed-by: Amit Kapila and Amit Langote
Discussion: https://postgr.es/m/0aa113a3-3c7f-db48-bcd8-f9290b2269ae@gmail.com
This patch adds the pseudo-types anycompatible, anycompatiblearray,
anycompatiblenonarray, and anycompatiblerange. They work much like
anyelement, anyarray, anynonarray, and anyrange respectively, except
that the actual input values need not match precisely in type.
Instead, if we can find a common supertype (using the same rules
as for UNION/CASE type resolution), then the parser automatically
promotes the input values to that type. For example,
"myfunc(anycompatible, anycompatible)" can match a call with one
integer and one bigint argument, with the integer automatically
promoted to bigint. With anyelement in the definition, the user
would have had to cast the integer explicitly.
The new types also provide a second, independent set of type variables
for function matching; thus with "myfunc(anyelement, anyelement,
anycompatible) returns anycompatible" the first two arguments are
constrained to be the same type, but the third can be some other
type, and the result has the type of the third argument. The need
for more than one set of type variables was foreseen back when we
first invented the polymorphic types, but we never did anything
about it.
Pavel Stehule, revised a bit by me
Discussion: https://postgr.es/m/CAFj8pRDna7VqNi8gR+Tt2Ktmz0cq5G93guc3Sbn_NVPLdXAkqA@mail.gmail.com
Michael Paquier
Peter Eisentraut
Thomas Munro
Tom Lane
Fujii Masao
Alexander Korotkov
Magnus Hagander
Tomas Vondra
Dean Rasheed
Bruce Momjian
Noah Misch
Amit Kapila
Heikki Linnakangas
David Rowley
Andres Freund
Peter Geoghegan
Joe Conway
Alvaro Herrera