parse analysis phase, rather than at execution time. This makes parameter
handling work the same as it does in ordinary plannable queries, and in
particular fixes the incompatibility that Pavel pointed out with plpgsql's
new handling of variable references. plancache.c gets a little bit
grottier, but the alternatives seem worse.
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
an allegedly immutable index function. It was previously recognized that
we had to prevent such a function from executing SET/RESET ROLE/SESSION
AUTHORIZATION, or it could trivially obtain the privileges of the session
user. However, since there is in general no privilege checking for changes
of session-local state, it is also possible for such a function to change
settings in a way that might subvert later operations in the same session.
Examples include changing search_path to cause an unexpected function to
be called, or replacing an existing prepared statement with another one
that will execute a function of the attacker's choosing.
The present patch secures VACUUM, ANALYZE, and CREATE INDEX/REINDEX against
these threats, which are the same places previously deemed to need protection
against the SET ROLE issue. GUC changes are still allowed, since there are
many useful cases for that, but we prevent security problems by forcing a
rollback of any GUC change after completing the operation. Other cases are
handled by throwing an error if any change is attempted; these include temp
table creation, closing a cursor, and creating or deleting a prepared
statement. (In 7.4, the infrastructure to roll back GUC changes doesn't
exist, so we settle for rejecting changes of "search_path" in these contexts.)
Original report and patch by Gurjeet Singh, additional analysis by
Tom Lane.
Security: CVE-2009-4136
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
conindid is the index supporting a constraint. We can use this not only for
unique/primary-key constraints, but also foreign-key constraints, which
depend on the unique index that constrains the referenced columns.
tgconstrindid is just copied from the constraint's conindid field, or is
zero for triggers not associated with constraints.
This is mainly intended as infrastructure for upcoming patches, but it has
some virtue in itself, since it exposes a relationship that you formerly
had to grovel in pg_depend to determine. I simplified one information_schema
view accordingly. (There is a pg_dump query that could also use conindid,
but I left it alone because it wasn't clear it'd get any faster.)
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
a toast table to be built, even if the sum-of-column-widths calculation
indicates one isn't needed. This is needed by pg_migrator because if the
old table has a toast table, we have to migrate over the toast table since
it might contain some live data, even though subsequent column drops could
mean that no recently-added rows could require toasting.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
SELECT foo.*) so that it cannot be confused with a quoted identifier "*".
Instead create a separate node type A_Star to represent this notation.
Per pgsql-hackers discussion of 2007-Sep-27.
main tables.
This requires vacuum() to accept processing a toast table standalone, so
there's a user-visible change in that it's now possible (for a superuser) to
execute "VACUUM pg_toast.pg_toast_XXX".
a portal are never NULL, but reliably provide the source text of the query.
It turns out that there was only one place that was really taking a short-cut,
which was the 'EXECUTE' utility statement. That doesn't seem like a
sufficiently critical performance hotspot to justify not offering a guarantee
of validity of the portal source text. Fix it to copy the source text over
from the cached plan. Add Asserts in the places that set up cached plans and
portals to reject null source strings, and simplify a bunch of places that
formerly needed to guard against nulls.
There may be a few places that cons up statements for execution without
having any source text at all; I found one such in ConvertTriggerToFK().
It seems sufficient to inject a phony source string in such a case,
for instance
ProcessUtility((Node *) atstmt,
"(generated ALTER TABLE ADD FOREIGN KEY command)",
NULL, false, None_Receiver, NULL);
We should take a second look at the usage of debug_query_string,
particularly the recently added current_query() SQL function.
ITAGAKI Takahiro and Tom Lane
grammar allows ALTER TABLE/INDEX/SEQUENCE/VIEW interchangeably for all
subforms of those commands, and then we sort out what's really legal
at execution time. This allows the ALTER SEQUENCE/VIEW reference pages
to fully document all the ALTER forms available for sequences and views
respectively, and eliminates a longstanding cause of confusion for users.
The net effect is that the following forms are allowed that weren't before:
ALTER SEQUENCE OWNER TO
ALTER VIEW ALTER COLUMN SET/DROP DEFAULT
ALTER VIEW OWNER TO
ALTER VIEW SET SCHEMA
(There's no actual functionality gain here, but formerly you had to say
ALTER TABLE instead.)
Interestingly, the grammar tables actually get smaller, probably because
there are fewer special cases to keep track of.
I did not disallow using ALTER TABLE for these operations. Perhaps we
should, but there's a backwards-compatibility issue if we do; in fact
it would break existing pg_dump scripts. I did however tighten up
ALTER SEQUENCE and ALTER VIEW to reject non-sequences and non-views
in the new cases as well as a couple of cases where they didn't before.
The patch doesn't change pg_dump to use the new syntaxes, either.
objects are specified, we drop them all in a single performMultipleDeletions
call. This makes the RESTRICT/CASCADE checks more relaxed: it's not counted
as a cascade if one of the later objects has a dependency on an earlier one.
NOTICE messages about such cases go away, too.
In passing, fix the permissions check for DROP CONVERSION, which for some
reason was never made role-aware, and omitted the namespace-owner exemption
too.
Alex Hunsaker, with further fiddling by me.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
Sequences and views could previously be renamed using ALTER TABLE, but
this was a repeated source of confusion for users. Update the docs,
and psql tab completion. Patch from David Fetter; various minor fixes
by myself.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
(which now deals only in optimizable statements), and put that code
into a new file parser/parse_utilcmd.c. This helps clarify and enforce
the design rule that utility statements shouldn't be processed during
the regular parse analysis phase; all interpretation of their meaning
should happen after they are given to ProcessUtility to execute.
(We need this because we don't retain any locks for a utility statement
that's in a plan cache, nor have any way to detect that it's stale.)
We are also able to simplify the API for parse_analyze() and related
routines, because they will now always return exactly one Query structure.
In passing, fix bug #3403 concerning trying to add a serial column to
an existing temp table (this is largely Heikki's work, but we needed
all that restructuring to make it safe).
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.